Hole punchers. Knock-out punchers. Nut splitters. Self-contained nut splitters. Double acting nut splitters. Hydraulic flange spreaders

Transcription

1 TOOLS HHP Range Hole punchers 36 HP & SP Range nock-out punchers 37 NS Range Nut splitters 38 HMNS Range Self-contained nut splitters 39 NS Range ouble acting nut splitters 40 HS-H Range Hydraulic flange spreaders 4 HS & HS-T Range Hydraulic flange spreader kits 42 MS & JS Range Mechanical flange spreaders & jaw spreaders 43 SJS Range Stepped jaw spreaders 44 P Range Hydraulic pipe bender & accessories 45 HP Range Workshop presses, V-blocks & bed winches s RSM Range Nylon multi-roller steerable moving skates 48 RS, RSS & RSH Range Multi-purpose moving skates 49 RX & RSX Range Heavy duty moving skates 35

2 HHP - HOL PUNHRS HHP30 Punching force up to Throat depth 70 Working pressure 700 ar HHP The Hi-orce HHP series hydraulic hole puncher range offers a choice of two models comprising of the HHP30, 30 capacity single acting version, and the HHP, capacity version. oth models are suitable for punching holes in steel plate as per the respective capacity of each model and are supplied complete with standard punch and die sets and an integral positioning and carrying handle. See pages for detailed information of suitable pumps for use with HHP series punchers. Maximum force HHP30 30 Throat depth 70 Punch capacity () Steel Hole punch plate diameter 0.0 up to 20.5 Standard punch/die sets included 0.5, , 20.5 Recoended pump & hose Manually Pneumatically operated operated HP232 complete with H3 3m hose HP20 complete with H3 3m hose excl. pump 9.8 HHP up to , , 20.5, 25.0 HP232 c/w 2 x H3 HP4 c/w 2 x H HHP30 HHP imensions in imensions in Note: pump supplied separately The HHP30 is single acting operation, the HHP is double acting operation 36

3 HP & SP - NO OUT PUNHRS apacity up to 0 Spring return hydraulic cylinder HP0-4 Working pressure 700 ar The Hi--orce HP and SP knock out puncher range is supplied as a complete set, including all standard sizes of punches/dies as specified below. Ideal for on-site hole punching in electric control panels and metal plates. Maximum force 0 Plate capacity () Stainless Mild steel steel HP0-2 HP HP0-2H HP0-4H SP Pump Included HP0 HP0 Not included Not included Hose Included H2 H2 Not included Not included Self contained unit with integral pump omplete set weight id you know... Hi-orce knock-out punchers are supplied complete with a carrying case SP7 HP0-2 HP0-4 SP7 escription Std.punch/die onduit Size Length Std.punch/die onduit Size Length Std.punch/die onduit Size Length Punches/dies included /2 3/ 4 / 4 / /2 3/ 4 / 4 / / / /2 3/ 4 / 4 /

4 NS - NUT SPLITTRS apacities from 7 to 75 Working pressure 700 ar ompact & easy to use NS0 The improved NS range of hydraulic nut splitters offers a choice of 5 models suitable for hexagon nut sizes from 7 to 75 (M0 to M48 bolt sizes). The revolutionary design incorporates a hardened steel linkage that ensures the blade cutting edge is kept parallel to the nut throughout the splitting process which improves operational efficiency and more importantly, blade life. esigned to easily split corroded nuts up to R44 hardness, Hi-orce nut splitters offer the ideal cold cut solution for removing worn or corroded fasteners, especially in applications where hot work permits are not allowed. s NS04 and NS0 are supplied fitted with a unique 360 positional swivel coupling for easy adjustment and fitment in confined spaces. Suitable pumps are detailed on pages 27 to 48. ngled body design on all models Provides necessary clearance on flanges and flat surfaces Manufactured from high quality steel NS04 NS0 NS NS206 NS25 Swivel not fitted to models NS, NS206 and NS25 Hexagon sizes olt sizes imensions in NS04 NS M0 - M22 M22 - M NS 4 - M27 - M NS M33 - M NS M39 - M

5 HMNS - SL ONTIN NUT SPLITTRS apacities from 7 to hoice of 3 models ompact & easy to use HMNS0 The HMNS range of hydraulic nut splitters offers a choice of 3 models suitable for hexagon nut sizes from 7 to (M0 to M33 bolt sizes). ll models have an angled body design to provide the necessary clearance on flanges and flat surfaces. The revolutionary design incorporates a hardened steel linkage that ensures the blades cutting edge is kept parallel to the nut throughout the splitting process which improves operational efficiency and more importantly, blade life. esigned to easily split corroded nuts up to R44 hardness, Hi-orce nut splitters offer the ideal cold cut solution for removing worn or corroded fasteners, especially in applications where hot work permits are not allowed. ll models incorporate an integral hydraulic pump with multi-positional lever for even greater versatility. ngled body design on all models Provides necessary clearance on flanges and flat surfaces Manufactured from high quality steel HMNS s Handle rotates freely through 360 and is removable 45 pprox. Hexagon sizes olt sizes imensions in HMNS04 HMNS0 HMNS M0 - M22 M22 - M27 M27 - M

6 NS - OUL TING NUT SPLITTRS hoice of 2 models Working pressure 700 ar ouble acting design NS6 The Hi-orce NS range of, hydraulic nut splitters offers a choice of 2 models suitable for splitting nuts of across flats () sizes from 2.5/6 to 5.3/8 (74 to 36). oth models are 700 bar maximum working pressure and feature a hydraulic piston for easy extension and retraction of the toughened steel splitting blade. Suitable manual and powered pumps for use with NS range nut splitters can be found on pages of this catalogue. Hi-orce NS range hydraulic nut splitters are easy to set up and capable of safely splitting nuts quickly without any sparks, flames or flying debris usually associated with cutting torches. The NS range nut splitter heads are designed to fit on all PI and NSI flanges and capable of splitting the hardest nuts with minimal damage to the stud bolt threads. Splitting blades are easy to remove and re-install after re-sharpening or when a replacement blade is required. Hexagon sizes inch Stud bolt thread sizes imperial metric imensions in NS404 NS6 5 2 / 6-4 / 4 4 /4-5 3 / / /4 2 3/ 4-3 / 2 M48 - M72 M72 - M

7 HS-H - HYRULI LNG SPRRS apacities from 4.5 to 0 Working pressure 700 ar HSH Quick and easy to assemble on flange HS-H hydraulic flange spreaders provide the ideal solution for safely opening pipe flanges in the marine and oil & gas industry. vailable in capacities from and 0-0, these models offer the user the capability of opening flanges up to 2 x 57 or 2 x 92 thick respectively. Hi-orce flange spreaders can be operated individually, or as a pair when opening large flanges using a standard pump (see pages 29 to 3) and connecting hose (see page ). With Hi-orce flange spreaders you are only minutes away from safely opening the toughest flanges without the risk of sparks caused by haer blows, chisels and flying wedges. 5 Suitable for fitment onto flanges with a maximum stud bolt size of / 8 (4 ) Pump and hose not included! See page 42 for complete kits. H G J I apacity Stroke Oil capacity cm³ Max. flange thickness Stud size Standard wedge HSH x HSH x HSH HSH imensions in G H I J min max

8 HS & HS-T - HYRULI LNG SPRR ITS HS apacities from 4.5 to 0 HP0 Working pressure 700 ar omplete with manual pump HS and HS-T hydraulic flange spreader kits offer a choice of either single spreader complete with pump and accessories (HS) or a twin spreader arrangement incorporating two flange spreaders operated from a single pump with a T-piece and twin hose connection (HS-T). or flange separation in applications where long lengths of heavy pipe work are involved, the HS-T twin spreader kit enables the operator to achieve parallel flange separation all around the joint. Hi-orce HP0 hand pump is supplied as standard to HS & HS-T flange spreader kits and details can be found on page 29 of this catalogue. Supplied complete with manually operated pump and hose assembly Suitable for fitment onto flanges with a 5 maximum stud bolt size of / 8 (4 ) H G J I Specifications : apacity Stroke Oil capacity cm³ Max. flange thickness Stud size Standard wedge HS HS HS-T HS-T x x x 48 2 x 8 2 x 57 2 x 92 2 x 57 2 x imensions in : G H I J min max HS HS HS-T HS-T

9 MS - MHNIL LNG SPRRS MS25 Suitable for bolt diameters up to 3 MS3 MS6 Maximum spread 23 No external power source required The MS range of mechanical flange spreaders comprises of 6 models, each offering a safe and economical way to open flanges without the risk of sparks. The threaded spindle can be operated using a standard spanner, allowing the user to apply a controlled force without damaging the flange. ue to the mechanical design of these flange spreaders, no external power source is needed and therefore, they can be used anywhere on-site. hoice of six models available High grade steel construction with high tensile cross bolt ase hardened spreading wedge MS6 MS9 MS22 MS25 MS28 MS3 Pin diameter inch 6 5/ 8 9 3/ / / 8 3 / 4 Min flange bolt hole diameter JS - JW SPRR Maximum flange thickness inch 2 x x / 8 2 x x / 8 2 x x / 6 2 x x 2 / 6 2 x x 2 / 4 2 x x 3 / 4 JS max min JS4 max The JS4 hydraulic spreader is the ideal solution for spreading, wedging and prising operations in a wide variety of industrial applications. The compact, low weight, spring assisted return design enables the tool to fit into a gap of 9.7 and offers a maximum spread of 94. Manufactured from high strength steel, with a maximum pressure of 700 ar, the JS4 is supplied fitted with a quick connect female half coupler, and can be used with HP0 manual hand pump and H hose. apacity Oil capacity cm³ imensions in JS

10 SJS - STPP JW SPRRS SJS0 apacity up to 3 Supplied with safety block & stepped blocks Maximum spread 60 Single acting, spring assisted return SJS0-M ompact & lightweight design The Hi-orce SJS0 hydraulic spreader offers the ideal solution for spreading, wedging and prising operations in a wide variety of industrial applications. The compact, low weight, spring assisted, piston retract design of the SJS0 offers the user a powerful 3 of spreading capacity. Manufactured from high strength steel, the low height jaw tips can easily fit within an 8 gap and can provide a total spreading distance of 60 in 5 operations, using the step blocks provided with the tool. Suitable for operation up to 700 ar maximum working pressure, and supplied complete with a female half quick connect coupler for easy attachment to a Hi-orce manually operated or powered hydraulic pump (see pages 27-48). The SJS0-M has all the features of the SJS0, but with the added benefit of an in built manually operated hand pump. SJS0 G SJS0-M Retracted xtended H I Retracted J Safety block supplied as standard xtended H I G J apacity Oil capacity cm³ imensions in G H I J SJS SJS0-M

11 P - HYRULI PIP NR Working pressure 700 ar P0 ends up to 90 degrees or use with hydraulic pumps The Hi-orce P0 hydraulic pipe bender is designed to bend various sizes and thicknesses of JIS standardised conduit pipe and gas pipe ranging from 5-82 (/2 to 3 ). Made of aluminium, the bending frame and pivot shoes are lightweight so that it can be easily carried on and off site, and can be operated by any manual or powered pump up to 700 ar. vailable as single pipe bender unit (P0) or as convenient set including all available bending shoes, suitable for either thin steel conduit (P0), thick steel conduit (P0) or standard gas pipe (P0). or a range of suitable Hi-orce pumps see pages of this catalogue. Max capacity Stroke P0 Oil capacity litres P P P P for P0, P0, & P0 includes metal storage box pplicable range / included bending shoes P0 does not include bending shoes Thin steel conduit from 5 (5/8 ) to 75 (3 ) Thick steel conduit from 6 (/2 ) to 82 (3 ) Standard gas pipe from 5 (/2 ) to 65 (2./2 ) imensions in G H NING SHOS range of bending shoes, compatible with the pipe bender P0, are available as an optional extra to ensure a smooth, wrinkle free bend. Note: P0 includes all S- bending shoes (8 pcs) P0 includes all S- bending shoes (8 pcs) P0 includes all S-SGP bending shoes (7 pcs) S-5 S-9 S-25 S-3 S-39 S-5 S-63 S-75 or thin conduit or thick conduit or standard gas pipe Pipe size Pipe outer dia Pipe inner dia ending radius Pipe size Pipe outer dia Pipe inner dia ending radius Pipe size Pipe outer dia Pipe inner dia (inch) () () () (inch) () () () (inch) () () 5/ 8 3/ 4 / 4 / / S-6 S-22 S-28 S-36 S-42 S-54 S-70 S-82 / 2 3/ 4 / 4 / / G H S-SGP5 S-SGP20 S-SGP25 S-SGP32 S-SGP40 S-SGP S-SGP65 / 2 3/ 4 / 4 / / ending radius ()

12 HP - WORSHOP PRSSS apacities from 0 to Stroke lengths from to Working pressure 700 ar HP42 hoice of manual, air or electric powered pumps Supplied complete with pressure gauge Other configurations available on request The HP and HP range of workshop presses offers a choice of 25 models with either single acting or cylinders and manually operated, air powered or electric powered pumps. loor presses incorporate an adjustable work table and dual scale pressure gauge. apacity Stroke ylinder model no. ¹ ylinder principle Pump model no. ² Pump operation HP020 HP030 HP2520 HP2530 HP254 HP2542 HP2544 HP20S HP20 HP30S HP30 HP4S HP4 HP42S HP42 HP44S HP44 HP20 HP30 HP4 HP42 HP44 HP4 HP42 HP HSS00 HSS00 HSS250 HSS250 HSS250 HSS250 HSS250 HSS3 H3 HSS3 H3 HSS3 H3 HSS3 H3 HSS3 H3 H3 H3 H3 H3 H3 H2 H2 H2 single acting single acting single acting single acting single acting single acting single acting single acting single acting single acting single acting single acting HP0 HP20 HP227 HP20 HP0334 HP03342 HP20734 HP257 HP252 HP2 HP4 HP2073 HP2074 HP20732 HP20742 HP20734 HP20744 HP245 HP2042 HP20742 HP HP HP3042 HP30422 HP30424 hand operated air powered hand operated air powered electric driven 0 V electric driven 240 V electric driven 45 V hand operated hand operated air powered air powered electric driven 0 V electric driven 0 V electric driven 240 V electric driven 240 V electric driven 45 V electric driven 45 V hand operated air powered electric driven 0 V electric driven 240 V electric driven 45 V electric driven 0 V electric driven 240 V electric driven 45 V Notes: ¹) or detailed specification on applicable cylinders, see pages 4 & 5 for HSS range and page 20 for H range. ²) or detailed specification on applicable pumps, see pages 29-3 for HP range, page 37-4 for HP range, page for HP range and page 47 for HP range.

13 HP - WORSHOP PRSSS actory mounted optional accessories include a mechanical bed winch for easy adjustment of the work table and multi-position V-blocks. ll presses are supplied completely assembled, ready for use. Hi-orce workshop presses are manufactured to the highest quality standards, and are suitable for the most demanding jobs. J G H In order to fully comply with regulations, some presses must be equipped with specific safety components, such as spring centered valves, two-hand control devices or others. Note: Press bed and press head are adjustable in steps of, tonne has 4 positions, tonne has 3 positions, tonne has 7 positions. 0 and 25 tonne press frame has fixed press head and adjustable press bed. Press Range apacity rame dimensions in (min) (max) (min) (max) G H J HP0 HP HP00 HP HP OPTIONL XTRS Only available factory fitted option Lifts and lowers work table vailable for and tonne presses Multi-position V-blocks Suffix W escription ed winch, suitable for and tonne models With flat bed and V-shape press surfaces vailable for 0, 25, and tonne presses ap. per set imensions in G H G H HV20 HV00 HV

14 RSM - NYLON MULTI-ROLLR STRL STS RSM2 apacities from 6 to 30 Steerable front skate for total control Low weight, compact size The RSM nylon multi-roller steerable skate range is ideal for use on tiled floors and is available with capacities from 6 to 30. These skates consist of 3 major parts: steerable turntable front skate and 2 adjustable rear skates. This modular design allows the system to be easily assembled and dismantled without the use of tools. ll models are fitted with low rolling resistance wheels with ball bearings and non-slip Neoprene pads on each load surface. RSM6 - RSM9 G H I RSM2 - RSM20 - RSM30 G H I apacity per skate set No. of wheels front steerable No. of wheels twin rear skate incl. box imensions in G H max I RSM6 RSM9 RSM2 RSM20 RSM no. 82 x 48 8 no. 82 x 48 8 no. 82 x 48 6 no. 82 x no. 82 x 48 8 no. 82 x 48 6 no. 82 x 48 8 no. 82 x 48 6 no. 82 x no. 82 x

15 RS & RSS - MULTI-PURPOS STS apacities from 5 to 37.5 vailable as complete kit or as individual skates RS20 ndless hardened roller chain The RS and RSS range of industrial, low profile skates offer the safest, fastest and most economical method of moving heavy equipment. The range comprises of 4 models available with capacities of up to 37.5 per skate. esigned with an endless hardened roller chain which revolves around the skate, at least 5 rollers remain in contact with the floor at any one time, ensuring smooth travel even over cracked concrete floors. With a range of turntables, stabilisers, spacer bars and steering handles available, Hi-orce skates can move and position heavy and irregular shaped loads easily and more economically than other lifting devices. Hi-orce skates are also ideal for use in confined spaces and typical applications include bridge building, transformers, generators, turbines, heavy machinery and many others. omplete kits : RS20 RS ap. per set 20 Skates Qty: 4 RSS20 RSS Turntables Qty: 2 RT20 RT Stabilisers Qty: 2 RS20 RS Spacer bars Qty: 4 R20 R Handles Qty: 2 RH20 RH Wooden box Qty: W W Individual skate selection chart : ap. per skate Length Width Height less t/table imensions in Height incl. t/table Roller width Roller dia RSS20 RSS RSS RSS Note : Turntables for RSS (RT) and RSS (RT) are available on request RSH - HVY UTY STS The RSH heavy duty range of moving skates are ideal for movement of heavy loads such as transformers, generators, turbines and machinery. vailable with capacities ranging from 5 to each skate. apacity Rollers in contact Rollers total imensions in G H I J RSH RSH RSH RSH RSH RSH

16 RX & RSX - HVY UTY STS WITH GROOV GUI RSX80 apacities from 40 to 400 Heat treated load bearing centre plate RX65 Heat treated, special chrome alloy chains vailable with capacities up to each skate, the RX heavy duty range of single roller moving skates incorporates a chain groove cut into the centre member of the skate, which helps to keep the chain running parallel with the body and is specially suited for moving loads over long distances. The RSX range offers the same features as the RX range, however has a double roller design, capable of transporting loads up to 400 per skate. oth the RX and RSX models feature high quality, heat treated components and are supplied with 4 mounting bolt holes for easy attachment to the load. L G I H Side view RX and RSX models rawing shows the RSX double-roller design, with the guide groove for the chain. RX features single-roller with guide groove. apacity Rollers in contact Rollers total imensions in G H I L RX Range - Single-roller design RX40 RX RX65 RX RX RX RSX Range - ouble-roller design RSX80 RSX RSX30 RSX RSX300 RSX x 4 2 x 6 2 x 4 2 x 6 2 x 9 2 x x 3 2 x 7 2 x 3 2 x 7 2 x 23 2 x

17 TOUGHLIT TL Range TL ccessories GT & PT Range TL pplications GT & PT pplications ToughLift Jacking Systems ToughLift ccessories Tyre ead reakers ToughLifts in use Tyre ead reakers in use L 5

18 TL - TOUGHLIT JING SYSTMS The Hi-orce ToughLift jacking system offers users the easiest and safest method of lifting material haulers in the mining and construction industry and locomotives in the railway industry, when critical maintenance and breakdown repair work requires completion. Suitable for lifting even the largest earth haulers in the world, the Hi-orce ToughLift is available in,, and lifting capacities. ll models are available with either a 0 volt or 240 volt single phase electric driven pump unit or a 6 ar compressed air driven pump version. ll models are operated via a remote, push button hand pendant controller with a 6 metre length control cable to ensure the operator has precise control over the lifting operation from a safe distance away from the load. Hi-orce ToughLift jacking systems are supplied fitted as standard with a hardened steel lifting saddle, patented snap latch handle assembly for easy positioning and transportation and a patented jacking system design for increased safety, enabling them to be easily positioned, in the tightest of spaces, to ensure location into the correct and exact lifting and jacking position. itted with large diameter wheels and heavy duty tyres as standard, all ToughLift models are narrow in width and have the smallest footprint area in the industry. wide variety of optional extras are also available which include load holding blocks, swivel load caps, locking, load block extensions, slip lock extensions and accessory tool boxes. urther details can be found on pages 54 to 56. With the Hi-orce ToughLift, plant operators in mining, construction and railway industries are assured of minimal maintenance and repair downtime, of their capital intensive equipment, from the strongest and most versatile lifting jack in the world! L 52

19 TL - TOUGHLIT JING SYSTMS Working pressure 700 ar hoice of 2 models with a range of accessories Used in mining, construction & railway industries TL520 TL380 or more information take a look at the ToughLift website hoice of,, or tonne lifting capacities Patented multi-positional lifting handle for easy transportation and positioning vailable with choice of electric or air driven hydraulic pump unit Push button remote hand pendant controller with 6 metre control cable Patented jacking system for safe and correct positioning prior to load lift Wide range of accessories available for even greater versatility (see pages 54 to 56) Narrow width, with small footprint for easy access into confined spaces Integral airline filter, lubricator and pressure regulator unit (air driven models only) User friendly design with easily accessible maintenance features Large diameter, heavy duty wheels for easy positioning underneath the load TL0255 TL0255 TL405 TL530 TL405 TL530 TL390 TL520 TL390 TL520 TL380 TL380 apacity Power Supply 6-ar air driven 240V electric 6-ar air driven 6-ar air driven 240V electric 240V electric 6-ar air driven 6-ar air driven 240V electric 240V electric 6-ar air driven 240V electric Stroke Max additional stack in Note: ll electric driven ToughLift jacking systems are available in 0V and 240V single phase, power supply options. or 0V version, please suffix model with 0, i.e TL for 0V version. L 53

20 TL - TOUGHLIT JING SYSTMS Handle in lifting position Handle in parking position Handle positions for manoeuvring Note: The tonne models have a combined lifting and parking position. G (Max) G (Min) (Min) (Max) Number TL0255 TL0255 TL405 TL530 TL405 TL530 TL390 TL520 TL390 TL520 TL380 TL imensions in MIN - MX G MIN - MX L 54 SLS Tilting saddles are fitted as standard to all ToughLift jacks, however flat saddles can also be supplied as an optional extra. oth types of saddle (flat or tilting swivel) can be easily fitted to all slip lock and load lock extensions. XTNSIONS Hi-orce also offers a range of extensions for use with ToughLift jacking systems. Slip lock extensions can be used in multiples up to the maximum height specified on page 55. Load lock extensions can only be used one at a time, however, they can be used in conjunction with slip lock extensions. oth extension options must terminate with a flat or swivel tilting saddle on the top of the extension stack. SPRS ase mounted spacers for increased closed height are available for tonne models only. Please suffix model with when ordering. ase mounted spacer

21 TL - TOUGHLIT JING SYSTMS SLIP LO XTNSIONS Length Length 75 SL-75- SL- SL75- SL- SL75- SL- SL75- SL75- SL- SL75- SL75- SL- SL75- SL75- SL- SL75- SL75- SL- SL75- SL- LO LO XTNSIONS Length 300 SL300- SL300- SL300- SL300- SL300- SL300- SL300- SL300- Length 400 Length 0 Recoended To suit max. extension jack model height in TL TL TL TL TL TL TL TL TL TL TL380 0 TL380 0 SL400- SL0- SL400- SL0- SL400- SL400- SL400- SL400- SL400- SL0- SL400- SL0- = xceeds recoended maximum extension height Length 75 LL-75- LL75- LL75- LL75- LL75- LL75- LL75- LL75- LL75- LL75- LL75- LL75- Length LL- LL- LL- LL- LL- LL- LL- LL- Length 300 LL300- LL300- LL300- LL300- LL300- LL300- LL300- LL300- Recoended Length Length To suit max. extension jack model height in LL400- LL400- LL400- LL400- LL400- LL400- LL400- LL400- LL0- LL0- LL0- LL0- TL0255 TL0255 TL405 TL530 TL405 TL530 TL390 TL520 TL390 TL520 TL380 TL = xceeds recoended maximum extension height LO LO STS Load block sets TL-2 TL-2 TL-405 TL-530 TL-405 TL-530 TL-390 TL-520 TL-390 TL-520 TL-380 TL-380 apacity Lock out Height () Load locks daptor To suit jack model TL0255 TL0255 TL405 TL530 TL405 TL530 TL390 TL520 TL390 TL520 TL380 TL380 L 55

22 TL - TOUGHLIT JING SYSTMS LT SLS lat saddle apacity To Suit Jack TL TL TL TL TL TL TL TL TL TL TL TL TL TL0255 TL0255 TL405 TL530 TL405 TL530 TL390 TL520 TL390 TL520 TL380 TL380 TOOL OXS To store your ToughLift accessories safely why not consider ordering a tool box made specifically to suit your accessory set. Hi-orce offers ToughLift accessory tool boxes made to special order with a fast delivery time to help maintain the working condition and integrity of your ToughLift system. TOUGHLIT ONIGURTION XMPLS Tilting saddle Tilting saddle L Tilting saddle Slip lock extension Load lock extension Load block set Piston Piston Piston 56

23 GT - GINT RR Working pressure 700 ar Used to break beads on earth movers etc ompatible for use with Hi-orce manual pumps GT The Hi-orce Giant ead reaker is used for breaking tyre beads and suitable for use on 5 piece rims 25 to 5 (635 to 295 ). With this model you can remove larger tyres with ease using a powerful 4 capacity, 700 ar hydraulic cylinder which has a nett weight of 2.5s The Giant bead breaker is compatible for use with Hi-orce 700 ar hand and powered pumps (see pages 27-48). Number apacity Stroke Working Pressure (ar) g imensions in G GT PT - OMI RR Working pressure 700 ar reaks beads in seconds with no rim damage PT ompatible for use with Hi-orce manual pumps The Hi-orce ombi ead reaker is used for breaking tyre beads and suitable for use on all single, two and three-piece hole budd, 7. x 6s and all tubeless truck tyres and rims. It can break beads in seconds using a powerful capacity, 700 ar hydraulic cylinder leaving no rim damage. With a nett weight of 5.5s, it is portable and light and is compatible for use with Hi-orce 700 ar rated hand and powered pumps (see pages 27-48). L Number apacity Working Range Stroke Working Pressure (ar) g imensions in PT up to

24 TL - TOUGHLIT PPLITIONS L GT & PT - RR PPLITIONS 58