Tension Brakes/Air Cooled
|
|
- Elisabeth Merritt
- 6 years ago
- Views:
Transcription
1 Brake Discs and Cooling The ModEvo brake disc was developed at the Bedford, UK factory using Finite Element Analysis techniques to ensure maximum strength with minimum weight. The design is optimized to make best use of the cooling air available at slow speeds, and being bidirectional, it achieves high heat dissipation capacity in either rotational direction, unlike some other brakes. An optional electric cooling fan is available where space is limited or more extreme heat handling is required. Available in five sizes: 0 mm, 00 mm, 0 mm, 00 mm and 0 mm diameters, all discs are the same thickness and use the same brake modules and actuators. Each disc can be specified with a minimum of a single module, up to the maximum number of modules that can be fitted around the disc. This allows torque- handling capabilities ranging from a maximum of lb.ft. for the 0 mm disc, up to lb.ft. for the 0 mm disc. NOTE: If using a high speed ductile iron disc the catalog heat rating should be reduced by 0% as the thermal conductivity of the ductile iron is less than grey cast iron. Maximum Rotational Speed Disc Standard High Diameter Speed Speed mm rev./min. rev./min. 0,0, 00,00,0 0,0, 00,0, 0,0, ARTEN Freios e Embreagens - Fone: -... P-00-WC 0/
2 Actuator Options Newly developed rolling diaphragm actuators are used in ModEvo, producing more force than previous designs to allow higher torque ratings. However, the sensitivity for which rolling diaphragms are favored is not compromised. Three actuator options are available, offering clamping forces of 00%, 0% or %. ModEvo 00/ with Fan The finned, die cast aluminum brake module is common to all brake disc diameters. Each module houses two pairs of actuators, and allows friction pads to be changed quickly without dismantling the module. Brake Size v v 0v (fan Diameter) DC AC AC 0 (0 mm) Yes Yes Yes 00 (0 mm) Yes Yes Yes 0 (0 mm) Yes Yes Yes 00 (0 mm) Yes Yes Yes (00 mm) not available Yes Yes 0 (0 mm) Yes Yes Yes (00 mm) not available Yes Yes (0 mm) not available Yes Yes C Optional Guard The optional guard has a plastic front with ModEvo molded in and a metal ventilated perimeter. Mounting is by four brackets on customer s machine frame. 00% The center of the guard is designed such that it may be cut-out by customer to suit the diameter of the shaft in through-shaft installations. 0% % P-00-WC 0/... ARTEN Freios e Embreagens - Fone: -
3 ModEvo Model 0 Model 0/ 0/* 0/* 0/* Minimum ( PSI) (0. Bars) % Actuators 0% Actuators 00% Actuators 0 Maximum ( PSI) ( Bars) 0/ 0 0/* 0 0 0/* 0/* * For single actuator operation torques for 0/ are applicable. Speed Model Max. 0/ 0 0/ 0 0/ 0 0/ WIthout Fan Parts Weight lb.ft. (kbm ) 00 Total (.) (.0) (.) (.) (.0) (.) (.) (.).0. (.) (0.00) WIth Electric Cooling Fan, 0 mm dia..0 (.) (.) (.) (.) (.0) (.0) (.0) (.0). (.).0 (.) ** For intermittent duty, consult the factory. Max. speed is with standard brake disc. A high speed brake disc capable of 0% higher speed is also available. Heat Capacity reduced by 0% when high speed disc is used. When selecting number of actuators, use a limit of. HP per actuator pair (. kw per Actuator pair) for duty w/o fan and. HP per Actuator pair (. kw per Actuator pair) when fan cooled. Note: Limit maximum operating temperatures of surfaces (rotor, friction pads, actuators, etc.) to 00 F or less. Temperatures above 00 F may cause damage and failure of components. Failure to do so will void warranty. ARTEN Freios e Embreagens - Fone: -... P-00-WC 0/
4 Model Minimum ( PSI) (0. Bars) Tension Brakes/Air Cooled ModEvo Model 00 % Actuators 0% Actuators 00% Actuators 00/ 00/* 00/* 00/* 00/* / 00/* 00/* 00/* 00/* 0 0 Minimum ( PSI) ( Bars) 0 0 C * For single actuator operation torques for 00/ are applicable. Speed Model Max. 00/ 00 00/ 00 00/ 00 00/ 00 00/ WIthout Fan Parts Weight lb.ft. (kbm ) 00 Total.0 (.) (.) (.0) (.) (.0) (.) (.) (.) (.) WIth Electric Cooling Fan, 0 mm dia.. (0.).0 (.) (.) (.0) (.0) (.0) (.) (.0) (.0) (.0). (.). (.) ** For intermittent duty, consult the factory. Max. speed is with standard brake disc. A high speed brake disc capable of 0% higher speed is also available. Heat Capacity reduced by 0% when high speed disc is used. When selecting number of actuators, use a limit of. HP per actuator pair (. kw per Actuator pair) for duty w/o fan and. HP per Actuator pair (. kw per Actuator pair) when fan cooled. Note: Limit maximum operating temperatures of surfaces (rotor, friction pads, actuators, etc.) to 00 F or less. Temperatures above 00 F may cause damage and failure of components. Failure to do so will void warranty. P-00-WC 0/... ARTEN Freios e Embreagens - Fone: -
5 ModEvo Model 0 Model 0/ 0/* 0/* 0/* 0/* 0/0* 0/ 0/* 0/* 0/* 0/* 0/0* Minimum ( PSI) (0. Bars) % Actuators 0% Actuators 00% Actuators 0 0 Minimum ( PSI) ( Bars) * For single actuator operation torques for 0/ are applicable. Speed Model Max. 0/ 0 0/ 0 0/ 0 0/ 0 0/ WIthout Fan Parts Weight lb.ft. (kbm ) 00 Total. (.) (.) (.) (.) (.0) (.) (.) (.0) (.) WIth Electric Cooling Fan, 0 mm dia.. (0.0) 0. (.) (.) (.) (.) (.) (.) (.) (.) (.) 0. (.). (0.) ** For intermittent duty, consult the factory. Max. speed is with standard brake disc. A high speed brake disc capable of 0% higher speed is also available. Heat Capacity reduced by 0% when high speed disc is used. When selecting number of actuators, use a limit of. HP per actuator pair (. kw per Actuator pair) for duty w/o fan and. HP per Actuator pair (. kw per Actuator pair) when fan cooled. Note: Limit maximum operating temperatures of surfaces (rotor, friction pads, actuators, etc.) to 00 F or less. Temperatures above 00 F may cause damage and failure of components. Failure to do so will void warranty. ARTEN Freios e Embreagens - Fone: -... P-00-WC 0/
6 Model Tension Brakes/Air Cooled ModEvo Model 00 00/ 00/* 00/* 00/* 00/* 00/0* 00/* 00/ 00/ 00/ 00/ 00/ 00/0 00/ Minimum ( PSI) (0. Bars) % Actuators 0% Actuators 00% Actuators 0 Minimum ( PSI) ( Bars) C * For single actuator operation torques for 00/ are applicable. Speed Model Max. 00/ Parts Weight lb.ft. (kbm ) 00 Total.00 (.) 00/ 0 WIthout Fan (.) 00/ 00/ 0 0 (.) (.) (.) (.0) (.) (.) (.0).. (0.) (0.00) WIth Electric Cooling Fan, 0 mm dia (.) 00/0 0 (.) (.) (.0) (.) (.0) (.0) (.0) 0. (.) 00/ 0. (.) ** For intermittent duty and thermal ratings using 00 mm fan, consult the factory. Max. speed is with standard brake disc. A high speed brake disc capable of 0% higher speed is also available. Heat Capacity reduced by 0% when high speed disc is used. When selecting number of actuators, use a limit of. HP per actuator pair (. kw per Actuator pair) for duty w/o fan and. HP per Actuator pair (. kw per Actuator pair) when fan cooled. Note: Limit maximum operating temperatures of surfaces (rotor, friction pads, actuators, etc.) to 00 F or less. Temperatures above 00 F may cause damage and failure of components. Failure to do so will void warranty (.) P-00-WC 0/... ARTEN Freios e Embreagens - Fone: -
7 ModEvo Model 0 Model 0/ 0/* 0/* 0/* 0/* 0/0* 0/* 0/* 0/ 0/* 0/* 0/* 0/* 0/0* 0/* 0/* Minimum ( PSI) (0. Bars) % Actuators 0% Actuators 00% Actuators 0 0 Minimum ( PSI) ( Bars) * For single actuator operation torques for 0/ are applicable. Speed Model Max. 0/ 0 0/ 0 0/ 0 0/ Parts Weight lb.ft. (kbm ) 00 Total. (.) ** For intermittent duty and thermal ratings using 00 mm or 0 mm fan, consult the factory. Max. speed is with standard brake disc. A high speed brake disc capable of 0% higher speed is also available. Heat Capacity reduced by 0% when high speed disc is used. When selecting number of actuators, use a limit of. HP per actuator pair (. kw per Actuator pair) for duty w/o fan and. HP per Actuator pair (. kw per Actuator pair) when fan cooled. Note: Limit maximum operating temperatures of surfaces (rotor, friction pads, actuators, etc.) to 00 F or less. Temperatures above 00 F may cause damage and failure of components. Failure to do so will void warranty WIthout Fan (.) (.) (.) (.) (.) (.) (.) (.) (.) WIth Electric Cooling Fan, 0 mm dia. 0/ / 0 (.) (.) (.0) (.) (.0) (.) (.) 0/ 0 ARTEN Freios e Embreagens - Fone: -. (0.0). (0.). (.). (.). (.). (.0)... P-00-WC 0/
8 Center C Front View Side View With Fan Side View Dimensions: inches (mm) Size ØA - Disc Size..... (0) (00) (0) (00) (0) ØB - Overall () () () () (0) ØC - Bolt P.C.D..... (.) (.) () (.) (.) ØD - Clearance Diameter (0) (0) (0) (0) (0) U - As Cast Bore () () () () () Maximum Bore () () () () () Z - Angular Position 0º 0º º 0º.º Maximum Number of Brake Modules Wichita Generic Drawing Number Hose Length/Module -00 W (,000) (,00) (,00) (,00) (,00) P-00-WC 0/... ARTEN Freios e Embreagens - Fone: -
Eaton Floating Housing Brake Airflex product line
Eaton Floating Housing Brake Airflex product line ARTEN Freios & Embreagens Ltda - Fone: 9- - www.arten.com.br Airflex FHB brake elements These spring-applied, pressure released, disc style brakes develop
More informationEasy Access with Removable Cover Panel
Mistral Brakes Modular design permits variable tensioning capacities! Wichita Clutch s Mistral pneumatic tension brakes are ideally suited to the needs of the corrugating market for which it was originally
More informationA l t r a I n d u s t r i a l M o t i o n. ModEvo Tension Control Brake
A l t r a I n d u s t r i a l M o t i o n ModEvo Tension Control Brake Wichita CLutch ModEvo Tension Control Brake ModEvo Tension Control Brake Versatile, cost-effective performance The name for Wichita's
More informationSafety Chuck CSB25P, CSB25F, CSB50P, CSB50F, CSB75P, CSB75F, CSB125P, CSB125F CSB150P, CSB150F, CSB175P, CSB175F
Web Control s Technical Data Sheet Safety Chuck CSB5P, CSB5F, CSB50P, CSB50F, CSB75P, CSB75F, CSB15P, CSB15F CSB150P, CSB150F, CSB175P, CSB175F Nexen's line of rugged safety chucks provide roll shaft support
More informationServing Industrial Markets Since 1961:
Full Line Brochure Clutches Brakes Clutch Brakes Caliper Brakes & Rotors Torque Limiters Air Shaft Seals Sheaves Serving Industrial Markets Since 1961: Food Processing & Packaging Material Handling Printing
More informationflowit by Fig. FTBGW-20 Bronze Gate Valve, Non-Rising Stem BS 5154 PN20 Material Specifications Dimensions (mm)
flowit flowit by Bronze Gate Valve, Non-Rising Stem BS 5154 PN20 Fig. FTBGW-20 Designed to BS 5154 Pressure Rating: PN20 Threaded Bonnet End connection: BS21 Taper Threaded (ISO 7) / BS EN10226-2 Shell
More informationTension Brakes/Air Cooled
IST. UTORIZO Tension rakes/ir ooled MX (55) 53 63 23 31 Magnum rakes The Wichita Magnum rake sets new standards in performance, safety and serviceability. The Magnum is easy to apply and simple to service.
More informationCaliper Disc Brakes. Description H-1. Technical Data and Selection Procedure H DP100 Caliper H-4. HC3 and HD3 Calipers H-7
Eaton Corporation Airflex Division 9919 Clinton Road Cleveland, Ohio 44144-1077 Caliper Disc Brakes H Phone (216) 281-2211 Fax: (216) 281-3890 Description H-1 Technical Data and Selection Procedure H-2
More informationJM Aerofoil Multi-Stage 50 Hz
JM Aerofoil Multi-Stage 5 Hz JM AEROFOIL - MULTI-STAGE CONTENTS Page: JM Aerofoil Multi-Stage - Introduction -5 Multi-Staging Motor Frame Size Schedules - Three Phase 7-8 Performance Curves SK1- SK135
More informationAltra Industrial Motion. AquaMaKKs Water Cooled Clutches and Brakes with Composite Water Jackets
Altra Industrial Motion AquaMaKKs Water Cooled Clutches and Brakes with Composite Water Jackets AquaMaKKs Water Cooled Clutches and Brakes AquaMaKKs water cooled clutches and brakes are designed to provide
More informationAir Tube Disc Clutches and Brakes
Air Tube Disc Clutches and rakes Low Inertia and Very Low Inertia Clutches and rakes Very Low Inertia Drive Plate Assembly with onded or Riveted Pads Ring Shims Multiple Spud Airtube Pressure Plate Floating
More informationDISC BRAKES. Section 4. Components and Operation of Disc Brakes. Disc Brake Assembly
DISC BRAKES Components and Operation of Disc Brakes A disc brake assembly consists of a: cast iron disc (disc rotor) that rotates with the wheel. caliper assembly attached to the steering knuckle. friction
More informationCOMPACT CHECK VALVES Engineering Creative Solutions for Fluid Systems Since 1901
COMPACT CHECK VALVES Engineering Creative Solutions for Fluid Systems Since 1901 TABLE OF CONTENTS SPRING LOADED CHECK VALVES Standard Features... 1 DOUBLE DISC CHECK VALVE Scope of the Line... 1 Technical
More informationCONTENTS. Page. Adjustable Axial Pitch Flow Fans 3. Dimensions 4. AP056 Performance Curves 5. AP056 Sound Performance 6. AP063 Performance Curves 7
CONTENTS Page Adjustable Axial Pitch Flow Fans 3 Dimensions 4 AP056 Performance Curves 5 AP056 Sound Performance 6 AP063 Performance Curves 7 AP063 Sound Performance 8 AP071Performance Curves 9 AP071 Sound
More informationAirflex Air Cooled Disc Clutches and Brakes
Airflex Air Cooled Disc Clutches and Brakes DBA Description... 183 DBA Brake Elements... 185 DBA Technical information... 186 DBB and DBBS Description... 187 DBB Brake Elements... 189 DBB Technical Information...
More informationFor Dynamic Stopping and Cycling Applications
Electrically Released Brakes For Dynamic Stopping and Cycling Applications Warner Electric s modular design brakes and clutch/brake units offer material handling system users a high performance alternative
More informationAirflex. Airflex DBB & DBA Brakes
36191_12pg Covers 8/11/03 6:06 PM Page 01 Airflex Airflex DBB & DBA Brakes These spring-applied, pressure released, disc style brakes develop equal torque in either direction of rotation. Their torque
More informationBell-house Mounted Arrangement. Highly Flexible K Coupling
Bell-house Mounted Arrangement. Highly Flexible K Coupling K Couplings for bell-house mounted arrangements are the only coupling type providing a blind assembly connection. They are specially designed
More informationquincy qsg series QuincyCompressor.com Made in the U.S.A. Performance You Demand. Reliability You Trust. options & Accessories Applications
QUINCY qsg SERIES rotary screw gas compressor quincy qrng series reciprocating gas compressor natural gas compressors quincy qsg series rotary screw gas compressor durable design Quincy QSG rotary gas
More informationDemag KB conical-rotor brake motors. Drives with unique principle
Demag KB conical-rotor brake motors Drives with unique principle 37468 Demag KB conical rotor brake motors: Demag KB conical rotor brake motors offered by Demag Cranes & Components feature a unique principle:
More informationNER/ER Electric Chain Hoists
NER/ER Electric Chain Hoists Extreme Duty Motor Increased performance through 60 minute duty rating, H4 classification, Class B insulation, cooling fins, and standard thermal motor protection. Offers higher
More informationQUINCY QRDS SERIES SINGLE-STAGE, OIL-LESS RECIPROCATING AIR COMPRESSORS 2-30 HP
QUINCY QRDS SERIES SINGLE-STAGE, OIL-LESS RECIPROCATING AIR COMPRESSORS 2-30 HP QUINCY QRDS SINGLE-STAGE, OIL-LESS Clean, oil-less air Quincy dependability High-efficiency, clean air CLEAN, OIL-LESS AIR
More informationLow and Medium Voltage Motors. 21-FII Series. New High Efficiency Design 37 kw 1,400 kw (50 HP 1,850 HP)
Low and Medium Voltage Motors 21-FII Series New High Efficiency Design 37 kw 1,400 kw (50 HP 1,850 HP) Meets World Wide 21-F Series High performance reduces cost of ownership Compact size reduces cost
More informationGEAR ACTUATORS For multi-turn valves
GEAR ACTUATORS For multi-turn valves VEAN GEAR ACTUATORS offer a superior combination of features for reliable and dependable service for multi-turn valves. Engineered to meet all applications and environmental
More informationHardened & Ground Linear Shafts
56 Hardened & Ground Linear Shafts Hardness: Carbon Steel 61-66 Rockwell C Corrosion Resistant Steel 54-56 Rockwell C Tolerance: h6 standard, special tolerances upon request Finish: Ground and polished
More informationQRDT. an EnPro Industries company QUINCY QRDT SERIES TWO-STAGE, OIL-LESS RECIPROCATING AIR COMPRESSORS 5-30 HP
QRDT an EnPro Industries company QUINCY QRDT SERIES TWO-STAGE, OIL-LESS RECIPROCATING AIR COMPRESSORS 5-30 HP QUINCY QRDT TWO-STAGE, OIL-LESS Clean, oil-free air Quincy dependability Setting the oil-less
More informationAir Tube Disc Clutches and Brakes
Air Tube isc lutches and rakes Spring-Set Air Release rakes Ring Very Low Inertia rive Plate Assembly onded or Riveted Shims Multiple Spud Airtube ub uctile enter Plate Airtube olding Plate rooved riction
More informationKeystone knife gate valves Figure OS1700
Bi-directional zero leakage ASME Class 150 rated knife gate valve. Designed for the rigors of high pressure slurry and oil sands applications Features General application The OS1700 has many features to
More informationBrake Systems. Introduction
Brake Systems Figure 1. A Typical Brake System Introduction The brake system (Figure 1) is designed to slow and halt the motion of a vehicle. To do that, various components within a hydraulic brake system
More informationUtility Sets Standard Design Features Standard design features common to all Class I and Class II fans
Standard Design Features Utility Sets Standard Design Features Standard design features common to all Class I and Class II fans Shaft AISI 1045, turned ground and polished for accuracy. Designed to provide
More informationIron Check Valves Illustrated Index
Iron Check Valves Illustrated Index Iron Body Swing Check Valve Bronze Mounted or All Iron 125 lb. SWP 200 lb. CWP Iron Body Swing Check Valve Bronze Mounted 250 lb. SWP 500 lb. CWP Iron Body Silent Check
More informationMTF. Technical features
Technical features Power supply Three-phase voltage from 24V to 690V, 50Hz or 60Hz or 100-130V, 60Hz and 200-240V, 50Hz ( types are supplied without capacitor); suitable for use with an inverter from 20Hz
More informationCENTRIFUGAL DIRECT DRIVE FANS CMT-CMB
CENTRIFUGAL DIRECT DRIVE FANS CMT-CMB Applications The CMT-CMB range of fans are suitable for many general and OEM ventilation applications where the extract of nonhazardous heated air is required. The
More informationCombination Clutch/Brake
WE9289 P1100WC PCB Catalog v4_new_p-1100-wc.qxd 1/31/12 10:51 AM Page 10 For metalforming equipment Fast, smooth cycling Cool running with higher torque Compact disc design Simple Installation Multiple
More informationTwin City Fan & Blower
BULLETIN 600 Twin City Fan & Blower September 2009 VENTILATING SETS TYPE BCV (Backward Inclined) TYPE BCVU5 (UL 705 Listed) TYPE BCVU2 (UL 762 Listed) TYPE BCVSH (UL Smoke & Heat) TYPE BAV (Airfoil) TYPE
More informationAirflex Clutches and Brakes for Oil & Gas
Airflex Clutches and Brakes for Oil & Gas October 2013 2008 Eaton Corporation. All rights reserved. Airflex Overview and History Leading Manufacturer of Industrial Clutches and Brakes Make-to-order business
More informationTransportation Products
Transportation Products Butterfly Valves Hopper Tees Actuators Accessories A Name You ve Trusted for Years... Resilient Seated Butterfly Valves 400 & 480 Series 1 Piece Body Design This economical, resilient
More informationASSEMBLIES. Table of Contents C BERG
ASSEMBLIES Table of Contents GEARBOXES - WORM WHEEL AND HELICAL GEARS TECHNICAL DATA - SPEED REDUCERS..................... C 2 WORM & WORM WHEEL GEARS SHAFT SIZE - 1/8, 3/16 AND 1/4......................
More information37/38 Pneumatic Spring Diaphragm Actuator
GE Oil & Gas Technical Specifications 05/2013 Masoneilan* Valves 37/38 Pneumatic Spring Diaphragm The 37/38 Series actuator is designed to provide high performance, reliability and long service life. Features
More informationBearings and Spacers
Bearings and Spacers Section Contents Ball Bearings P4...Page 12 2 Bronze Bearings...Page 12 3 Moulded Bearings...Page 12 4 Bearing Pre load Washers...Page 12 Bearing Spacers...Page 12 6 Technical Information...Page
More informationMcGUIRE AIR COMPRESSORS HP RECIPROCATING AIR COMPRESSORS. R-Series. McGUIRE AIR COMPRESSORS
2 30 RECIPROCATING AIR COMPRESSORS R-Series CHAMPION R-SERIES Customized Solutions Unparalleled Performance A Winning Combination Champion compressors are proven units, known for their reliability over
More informationThe WPT. Advantage. Airtube Advantage. O-Ring Advantage. Preferred Airtube StyleVS. Piston Style
The WPT Advantage The WPT advantage is built into every one of our Water Cooled Brakes (WCB). Airtube Advantage Standard with all WCB units, the reinforced neoprene airtube reacts accurately to small pressure
More informationAir Moving Solutions. VENTILATING SETs BCV BCVU5 BCVU2 BCVSH BAV FCV
Air Moving Solutions. VENTILATING SETs BCV BCVU5 BCVU2 BCVSH BAV FCV CATALOG 600 March 2012 VentilatingSets Models BCV BCVU5 BCVU2 BCVSH BAV FCV Twin City Fan s line of utility ventilating sets is one
More informationPerformance. Sound Levels. Impellers. Motors. Accessories
EuroSeries (ESP) Die cast aluminium impellers Fully speed controllable Air Volumes up to 13.89m 3 /s Sizes 250 to 1000 dia protected to IP54 Operating Temperatures from -40 C up to +70 C Insulation Class
More informationDesign features of models K and AC brakes. K DC-Powered Brake. AC Three phase Powered Brake
NEMA C-Face spring applied fail-safe brakes model K and AC mounted brakes with NEMA 2 housing are designed specifically to interchange with Stearns and Dings models as shown in Table1. Design features
More informationMTF-E. Technical features
Technical features Power supply Threephase voltage from 220V to 690V, 50Hz or 60Hz; suitable for use with a PM inverter from 20Hz to the base frequency with constant torque load profile. Polarity 2 and
More informationVALVES & CONTROLS KEYSTONE BUTTERFLY VALVES RESILIENT SEATED SERIES 61, 14" TO 24" 61W - Wafer style and 61L - Lugged style FEATURES
VALVES & CONTROLS KEYSTONE BUTTERFLY VALVES RESILIENT SEATED 61W - Wafer style and 61L - Lugged style FEATURES Rounded polished disc edge gives full concentric sealing, lower torques, longer seat life
More informationSteel Fabricated Coupling
Steel Fabricated Coupling Straight Connection IMPORTANT LINKS Click appropriate words to go to: Standard Limited Warranty Sales Terms & Conditions Freight Policy Returns Policy Corrosion & Product Selection
More informationTAC TM Butterfly Valve Assemblies
TAC TM Butterfly Valve Assemblies Technical Data TAC s new butterfly valve line offers a wide range of two- and three-way sizes, along with low pressure pneumatic spring return, electric non-spring return,
More information.75 5 HP OIL-LESS RECIPROCATING AIR COMPRESSOR SYSTEMS. MTO II Series
.75 5 HP OIL-LESS RECIPROCATING AIR COMPRESSOR SYSTEMS MTO II Series CHAMPION MTO MTO II SERIES II SERIES Pure Air Advanced Technology A Winning Combination Champion compressors are proven units, known
More informationDIMENSIONS. Oil Capacity = 14.6 oz Maximum Fluid Temperature = 140 F Inlet Thread = 1/2 F Discharge Thread = 3/8 F
Plunger Pumps XMA 1750 RPM E VERSION 1 1/8 WITH NEMA 182-184 FLANGE FEATURING MANIFOLD: High strength forged brass for long term use. DIMENSIONS BOLTS: Eight 6mm grade 12.9. PLUNGERS: A special thick solid
More informationBUTTERFLY VALVE VF-7 Series
BUTTERFLY VALVE VF-7 Series CENTRIC, RUBBER SEATED LEVER GEAR PNEUMATIC - ELECTRIC OPERATED ALLOWABLE PRESSURE DN 40 300mm : 16 bar DN 350 1200mm : 10 bar INVESTMENT CASTING STAINLESS STEEL BODY 2 12 (50mm
More informationCylinders. Series TQ Agricultural Cylinders. Vickers. Nominal Pressure: 2500 psi
Vickers Cylinders Series TQ Agricultural Cylinders Nominal Pressure: 500 psi Released 10 91 113A Series TQ Hydraulic Cylinders Designed for Agricultural Applications Features Working pressure to 500 psi
More informationCurrent Controlled Electric Hysteresis Brakes Advantages The superior design of these hysteresis devices provides several inherent advantages over mag
Current Controlled Hysteresis Brakes Electrically controlled No wearing parts Infinitely adjustable for precise torque/ tension control TRANSMITTING TORQUE THROUGH AIR Current Controlled Electric Hysteresis
More informationTWO-PIECE BRAKE DISCS IN A VEHICLE
TWO-PIECE BRAKE DISCS IN A VEHICLE www.hella-pagid.com TWO-PIECE BRAKE DISCS IN A VEHICLE Ever since the disc brake system was introduced into cars, the brake disc has been a significant structural component
More informationHSS Range Horizontal Bearing Assemblies. HSS Range Horizontal Bearing Assemblies
HSS Range Horizontal Bearing Assemblies HSS Range Horizontal Bearing Assemblies A world of solutions to improve things moving Technical and design support Quality plans and standards Research, design and
More informationML SERIES RECIPROCATING AIR COMPRESSORS MASTERLINE PRESSURE LUBRICATED AIR COMPRESSORS 5 30HP
ML SERIES RECIPROCATING AIR COMPRESSORS MASTERLINE PRESSURE LUBRICATED AIR COMPRESSORS 5 30HP SOME COMPANIES ARE FOUNDED ON HARD WORK. OTHERS ARE FOUNDED ON IDEALS. FS-CURTIS WAS FOUNDED ON BOTH. 1854
More informationDiaphragm Valves. Product information
Diaphragm Valves Product information ART 510 Diaphragm Valve Weir Type Features Screwed BSP Taper Ductile Iron Body Rising Handwheel Indicator Bonnet Diaphragm Available Grade A - Natural Rubber Grade
More informationAxial or tubular wall-mounted fans, PL version fitted with a plastic rotor and AL version with an aluminium rotor.
HCH HCH Extremely robust wall-mounted, axial or tubular fans Axial or tubular wall-mounted fans, PL version fitted with a plastic rotor and AL version with an aluminium rotor. Fan: Airflow direction from
More information09DK054, 064, 074, 084, 094 AIR-COOLED CONDENSERS
09DK-4SB 09DK054, 064, 074, 084, 094 AIR-COOLED CONDENSERS PERFORMANCE DATA CERTIFIED DIMENSION PRINT 1994 Carrier Corporation Syracuse, New York 13221 Form 09DK-4SB Supersedes 09DK-3SB Printed in U.S.A.
More informationPVC Stargrip series 4000 Mechanical Joint Wedge Action Restraint for Plastic Pressure Pipe
Joint Restraint Products PVC Stargrip series 4000 Mechanical Joint Wedge Action Restraint for Plastic Pressure Pipe INFORMATION The PVC Stargrip Mechanical Joint Restraint System is a unique product with
More informationChapter 33 Fundamentals of Hydraulic and Air-Over-Hydraulic Braking Systems
Chapter 33 Fundamentals of Hydraulic and Air-Over-Hydraulic Braking Systems Introduction Vehicle s braking system must meet the following requirements: To adequately and safely reduce a vehicle s speed,
More informationP200 Pressure Regulator
P200 Pressure Regulator Minimize Sudden Downstream Load Change Wide Pressure Ranges P202 has internal relief valve for overpressure protection The P200 series pressure regulator is a manual, direct acting,
More informationButterfly Valves CONCENTRIC BUTTERFLY VALVES 3-OFF SET TYPE BUTTERFLY VALVES AGECT-BFV
AGECT-BFV-2017 www.controlvalve.co.kr CONCENTRIC BUTTERFLY S OFF SET TYPE BUTTERFLY S 3-OFF SET TYPE BUTTERFLY S Butterfly Valves AGE hopes to lead 21C s valve mechanism based on outstanding engineering.
More informationPneu-Turn Rotary Actuators
Pneu-Turn Rotary Actuators Pneu-Turn Actuators 4.3-4.14 Three-Position Pneu-Turn 4.15-4.17 Engineering Specifications/ Application Checklist 4.18-4.21 TURN TO THE BIMBA PNEU-TURN ROTARY ACTUATOR FOR THESE
More informationAluminium Frame Motors Improved Efficiency EFF2
Motors Energy Automation Coatings Aluminium Frame Motors Improved Efficiency EFF2 Standard Features: Three-phase, multivoltage, IP55, TEFC : 0.12 up to 11kW Frames: 63 up to 132M Voltage: 220-240/380-415V
More informationXMV 3400 RPM D VERSION 1 WITH GAS ENGINE FLANGE DIMENSIONS
Plunger Pumps FEATURING MANIFOLD: High strength forged brass for long term use. XMV 3400 RPM D VERSION 1 WITH GAS ENGINE FLANGE DIMENSIONS BOLTS: Eight 6mm grade 12.9. PLUNGERS: A special thick solid ceramic
More informationA6C A5C-B6C B5C B5H A6C A5C B6C B5C B5H. Model. Up to kw. Power. Up to V. Voltages. Model IP55. Frame Pole 2, 4, 6, 8 and 10
A6C A5C-B6C B5C B5H Model Power Voltages Model IP55 A6C A5C B6C B5C B5H Up to 2.400 kw Up to 11.000 V LV A6C - B6C - A5C - B5C MV B5H Frame 71 560 Pole 2, 4, 6, 8 and 10 Cooling IC 411 ( IC 416 optional)
More informationAxial fans. What s more, non-stock models are normally available within two weeks.
Axial fans 7 sees the introduction of a new production line at Xpelair s Peterborough plant for the Scimitar Sickle blade fans in Plate, Short Case and Roof versions up to 63mm. Scimitar will join an impressive
More informationPVC Stargrip series 4000 Mechanical Joint Wedge Action Restraint for Plastic Pressure Pipe
PVC Stargrip series 4000 Mechanical Joint Wedge Action Restraint for Plastic Pressure Pipe INFORMATION The PVC Stargrip Mechanical Joint Restraint System is an exceptional restraint system for mechanical
More information502 VALVE WITH UM1.5 ELECTRIC ACTUATOR. Model/Ref:
Model/Ref: 270090022000 www.lauridsenindustri.com CHARACTERISTICS The 502+UM1.5 is a 2-way brass ball valve dedicated to the automatic shut-off of non-corrosive common fluids: water, air, hydrocarbons,
More informationSheet 1 Variable loading
Sheet 1 Variable loading 1. Estimate S e for the following materials: a. AISI 1020 CD steel. b. AISI 1080 HR steel. c. 2024 T3 aluminum. d. AISI 4340 steel heat-treated to a tensile strength of 1700 MPa.
More informationSabre Plate Mounted Sickle Fans (VSP)
Sabre Plate Mounted Sickle Fans (VSP) Swept impeller with Aerofoil blades, winglets and serrated trailing edge for optimum performance One shot die cast impeller, dynamically balanced for smoother operation
More informationP200 Pressure Regulator
P200 Pressure Regulator Minimize Sudden Downstream Load Change Wide Pressure Ranges P202 has internal relief valve for overpressure protection The P200 series pressure regulator is a manual, direct acting,
More information133x152 TWO PRODUCT RAMBLER. 133x152 TRACK MOUNTED IMPACT CRUSHER. Two Bars Per Row. 150mm x 320mm Bearing With Big Cast Base. Each Hammer lbs.
Construction Equipment Co. 2 5 1 x 3 3 1 Feeder Size 58 x 18 CAT 600hp Impactor 133x152 Track Mobile Impactor Features Heavy Duty Rotor 4 x 8 Backing Bar With Replaceable Seats 14 Steel Rotor Core Dual
More informationKTM PNEUMATIC ACTUATORS AK SERIES (FOR SMALL AND MIDDLE SIZED VALVES)
Compact and light-weight actuator, equipped with a guide rod for smooth operation and extended durability FEATURES Double acting and single acting type are of the same shape and dimension Double rack and
More informationSUBMERSIBLE PUMP RANGE
SUBMERSIBLE PUMP RANGE www.vegapumps.co.za INDEX VXM / VX SUBMERSIBLE PUMP... 4 PERFORMANCE DATA... 5 V RANGE SCREENED SWAGE SUBMERSIBLE PUMP... 6 PERFORMANCE DATA... 7 DIMENSIONAL DRAWING... 9 C-SERIES
More informationT200 Pressure Regulator
T200 Pressure Regulator Minimize Sudden Downstream Load Change Wide Pressure Ranges T202 has internal relief valve for overpressure protection The T200 series pressure regulator is a manual, direct acting,
More informationMax. airflow m 3 /s Diam. min. Diam. max
Axial Fans Max. airflow m 3 /s Diam. min Diam. max 1% adjustable motor Assembly, any position Reversible (3% Reduction) Page Number AW AR AW.97 2 3 * * 13 AR.97 2 3 * * 134 ZSP 2.9 315 5 * * 13 ZAP 13.89
More informationTension Brakes/Very High Heat Capacity
Tension Brakes/Very High Heat apacity opper disc design for high heat dissipation External air and water connections Accurate control High Temperature O-Rings New friction material lasts longer with less
More informationDESCRIPTION & OPERATION
DESCRIPTION & OPERATION BRAKE BOOSTER Delco-Moraine Single Diaphragm A combined vacuum-hydraulic unit which uses a combination of intake manifold vacuum and atmospheric pressure to provide power assist.
More informationMotorized Butterfly Valve
Motorized Butterfly Valve Actuated butterfly valves PRODUCT DATA FEATURES Wide size range (DN 50 500) For On-Off Control with feedback signal Manual override Hand-Wheel design. Manual operation can be
More information4 Series 298 Air Operated Stainless Steel Piston Valves For Steam and Aggressive Fluid Service
Series 98 Air Operated Steel Piston Valves For Steam and Aggressive Fluid Service Applications Rubber Vulcanization/Tire Presses Industrial Autoclaves Foundries Laundry Food & Beverage Chemical Processing
More informationTYPE ET14 TEMPERATURE REGULATOR CAST IRON, BRONZE or STEEL CONTROLS 20 to 500 F
TYPE ET14 TEMPERATURE REGULATOR CAST IRON, BRONZE or STEEL CONTROLS 20 to 500 F Temperature Regulation for Batch Process Storage Heaters (Water, Fuel Oil or Chemical) Air Heating TYPE ET14 TEMPERATURE
More informationPremium Efficiency Exceeds Effciency Levels Mandated by CSA C390 and EPACT 92
Premium Efficiency Exceeds Effciency Levels Mandated by CSA C390 and EPACT 9 Crown Triton TM Series Premium Efficiency Motors Experience Combined with Technology yundai Induction Motors use Finite Element
More informationSERVICE BRAKES GROUP 35A 35A-1 CONTENTS GENERAL DESCRIPTION... 35A-2 FRONT DISC BRAKE... 35A-5 MASTER CYLINDER... 35A-4 REAR DISC BRAKE...
35A-1 GROUP 35A CONTENTS GENERAL DESCRIPTION......... 35A-2 MASTER CYLINDER............. 35A-4 FRONT DISC BRAKE............. 35A-5 REAR DISC BRAKE.............. 35A-6 BRAKE BOOSTER ASSEMBLY.... 35A-4 35A-2
More informationXTV 3400 RPM N VERSION 24MM SOLID SHAFT DIMENSIONS
Plunger Pumps FEATURING MANIFOLD: High strength forged brass for long term use. XTV 3400 RPM N VERSION 24MM SOLID SHAFT DIMENSIONS BOLTS: Six 6mm grade 12.9. PLUNGERS: A special thick solid ceramic for
More informationPRESSURE REDUCING VALVE
Schematic Throttles to reduce high upstream pressure to constant lower downstream pressure Closes quickly when downstream pressure exceeds reduced pressure setpoint 3 PRESSURE REDUCING VALVE with SURGE
More informationBrake Motors Aluminium Frame Improved Efficiency EFF2
Motors Energy Automation Coatings Brake Motors Aluminium Frame Improved Efficiency EFF2 Standard Features: Three-phase, multivoltage, IP55, TEFC Output: 0.12 up to 11kW Frames: 63 up to 132M Voltage: 220-240/380-415V
More informationP200 Pressure Regulator
P200 Pressure Regulator Minimize Sudden Downstream Load Change Wide Pressure Ranges P202 has internal relief valve for overpressure protection The P200 series pressure regulator is a manual, direct acting,
More informationYour Global Flow Control Partner. Series 92/93 Pneumatic Actuators. Technical Manual
Your Global Flow Control Partner Series 92/93 Technical Manual TM-1056 Pneumatic Actuator - 04/18/2017 Bray Series 92/93 Technical Manual - Table of Contents Topic...Page(s) Actuator Installation Notes...
More informationData sheet. Page: 1 / 5. ETL GGSAV11D BKSBIE3 Inline pump. Operating data. Design
Data sheet Page: 1 / 5 Operating data Requested flow rate Operating data determined for maximum inlet pressure Requested developed head 15.00 m Pumped medium Ambient air temperature 20.0 C Fluid temperature
More informationStandard Specifications. Fluid Standard specifications. VH600 Ambient and fluid temperature Operating angle Lubrication. Optional Specifications
Hand Valve Series Standard Specifications Fluid Standard specifications Max.operating,, pressure Ambient and fluid temperature Operating angle Lubrication Air.5MPa.MPa MPa 5 to C (No freezing) 9 Not required/when
More informationBearings for Fans. Bearing arrangements for fans
1.1.1. Bearings for Fans Bearing arrangements for fans Summary The large variety of fans can be classified in different ways. Generally, there are two categories that are based on the fan s directions
More informationSelection Chart Project: Model: Chk d: Date: C C V V V A CAPACITY
Selection Chart Project: Model: Chk d: Date: 45 (Ft) (m) 15.0 HZ (Synchronous Speed - 1800 RPM) 35 C2905-7 25.0 8.0 C1125-17 C15-1170 C2185-885 7.0 TOTAL HEAD 15 6.0 5.0 C1455-1170 V0494-1170 V0554-1170
More informationModel DFC and DFO Valve Actuator
Features Reliable Design Formed diaphragm has no friction with other moving parts allowing maintenance free operation through years of constant cycling. Protective Coatings External surfaces are either
More informationHD Series. Pilot-Operated Regulating Valves. HD Series features & benefits
Watson McDaniel reserves the right to change the designs and/or materials of its products out notice. 2004 Watson McDaniel Company features & benefits Ductile Iron body for higher pressures Full port strainer
More informationDesign Analysis and Optimization of Disc Brake
Design Analysis and Optimization of Disc Brake Assembly of A 4- Wheeler Race C ar Avijit Singh Gangwar B.E. Automobile Engineer Manipal Institute Of Technology Abstract-A disc brake is a wheel brake which
More information1008 thru 3030 sizes. C Hub Dia. Short No. Std. Hex Capacity. Key u. F Wrench D Steel Qty. Size Install.
TAPER-LOCK ings - Dimensions PT6-3 1008 thru 3030 sizes DIMENSIONS FOR 1008 THRU 3030 TAPER-LOCK BUSHINGS RATINGS (Lb-in) C Hub Dia. F L M Wrench Torque A B D Std. Short Short No. Torque CL 30 Std. Hex
More informationHead BKA1923F BKA2528F BKA3236 BKA4045 BKA1923F BKA2528F BT40-MD32F-100 BKA3236 BT40-MD40F-115 BKA4045 BT40-MD50F-105 BKA5056 BKA6372 BT40-MD63F-110
FZ Micro Boring Bar BT - BKA MAS3-BT 1DIV. =ø0.02mm BT30 - BKA - 1 BKA - 1 1 BKA - 1 1 BKA - 1 1 BT - BKA - 1 L 1 1 BKA - 1 1 BKA - 160 160 BKA - 15 15 BKA56-175 175 BKA - 1 1 BKA - 0 0 Max.Boring Depth
More information