VS18 series, 2 x 2/2, 2 x 3/2, 5/2 or 5/3 ISO valve island

Size: px
Start display at page:

Download "VS18 series, 2 x 2/2, 2 x 3/2, 5/2 or 5/3 ISO valve island"

Transcription

1 VS8 series, x /, x /, 5/ or 5/ > Modular system offering a wide range of configuration options conforming to ISO 507-, 8 mm wide valves > V d.c. or 5 V a.c. Multipole and single station sub-base > Wide range of accessories including shut off valves enabling non-stop operation > Dual spool technology - Glandless spool and sleeve for long life - Softseal spool for high flow > Integrated Fieldbus and Industrial Ethernet > Fieldbus expandable with single add-on stations, Industrial Ethernet expandable with double add-on stations. Technical features Medium: Compressed air, filtered to 0 µm, lubricated or non-lubricated Operation: VS8G: Glandless spool valve, solenoid pilot actuated VS8S: Softseal spool valve, solenoid pilot actuated > Up to 0 solenoids, operating at 6 bar pressure > UL and ATEX > To configure and order a Valve Island visit - en/valve-islands Flow: Softseal Function l/min Cv Kv x / 550 0,56 0,6 x / 600 0,6 0,5 5/; 5/ 650 0,66 0,57 Glandless 5/; 5/ 550 0,56 0,8 Mounting: Sub-base Ports +: G/8, NPTF /8, PIF 8 mm, PIF 6 mm, PIF / Operating pressure: Maximum pressure 0 bar (5 psi) VS8S models and VS8G solenoid pilot actuated valves with internal pilot supply 6 bar ( psi) VS8G solenoid pilot actuated valves with external pilot supply Media/Ambient temperature: C (+5... F) (Ambient) C (+... F) (Media) Air supply must be dry enough to avoid ice formation at temperatures below + C (+5 F). Materials: Body/sub-base: Die-cast aluminium Glandless spool & sleeve (VS8G): Aluminium, hard anodised, PTFE coated Softseal spool (VS8S): Aluminium with HNBR seals Plastic parts: POM, PA, PPA Mounting sheets/screws: Steel, zinc coated Springs: Stainless steel Sandwich plates: Aluminium bar material, PA Electrical contacts: Brass, tin coated PCB: Glass epoxy without notice, the specifications given in this document. ( i) 05 IMI International s.r.o. 08/7 en

2 VS8 series, x /, x /, 5/ or 5/ Technical data x / Double solenoid actuated softseal valves (flow 550 l/min) Symbol Function x / Valve dimensions see page 8 NO = Normally open, NC = Normally closed *) Pilot air supply through port *) Pilot air supply through port / Actuation/ return Pilot supply Pilot pressure (bar) Operating pressure (bar) Manual override Voltage Model NC Sol/Spring Internal,5... 0*) -0, Push only V d.c., W VS8SEDFA NC Sol/Spring Internal,5... 0*) -0, Push only 5 V a.c.,5 VA VS8SEDF8A NC Sol/Spring Internal,5... 0*) -0, Push & turn V d.c., W VS8SEDFA NC Sol/Spring Internal,5... 0*) -0, Push & turn 5 V a.c.,5 VA VS8SEDF8A NC Sol/Spring Internal,5... 0*) -0, Extended, Push only V d.c., W VS8SEDF5A NC Sol/Spring Internal,5... 0*) -0, Extended, Push only 5 V a.c.,5 VA VS8SEDF58A NC Sol/Spring External,7 + (0,5 x press. port)*) -0, Push only V d.c., W VS8SEDFA NC Sol/Spring External,7 + (0,5 x press. port)*) -0, Push only 5 V a.c.,5 VA VS8SEDF8A NC Sol/Spring External,7 + (0,5 x press. port)*) -0, Push & turn V d.c., W VS8SEDFA NC Sol/Spring External,7 + (0,5 x press. port)*) -0, Push & turn 5 V a.c.,5 VA VS8SEDF8A NC Sol/Spring External,7 + (0,5 x press. port)*) -0, Extended, Push only V d.c., W VS8SEDF5A NC Sol/Spring External,7 + (0,5 x press. port)*) -0, Extended, Push only 5 V a.c.,5 VA VS8SEDF58A NO Sol/Spring Internal,5... 0*) -0, Push only V d.c., W VS8SFDFA NO Sol/Spring Internal,5... 0*) -0, Push only 5 V a.c.,5 VA VS8SFDF8A NO Sol/Spring Internal,5... 0*) -0, Push & turn V d.c., W VS8SFDFA NO Sol/Spring Internal,5... 0*) -0, Push & turn 5 V a.c.,5 VA VS8SFDF8A NO Sol/Spring Internal,5... 0*) -0, Extended, Push only V d.c., W VS8SFDF5A NO Sol/Spring Internal,5... 0*) -0, Extended, Push only 5 V a.c.,5 VA VS8SFDF58A NO Sol/Spring External,7 + (0,5 x press. port)*) -0, Push only V d.c., W VS8SFDFA NO Sol/Spring External,7 + (0,5 x press. port)*) -0, Push only 5 V a.c.,5 VA VS8SFDF8A NO Sol/Spring External,7 + (0,5 x press. port)*) -0, Push & turn V d.c., W VS8SFDFA NO Sol/Spring External,7 + (0,5 x press. port)*) -0, Push & turn 5 V a.c.,5 VA VS8SFDF8A NO Sol/Spring External,7 + (0,5 x press. port)*) -0, Extended, Push only V d.c., W VS8SFDF5A NO Sol/Spring External,7 + (0,5 x press. port)*) -0, Extended, Push only 5 V a.c.,5 VA VS8SFDF58A NO/NC Sol/Spring Internal,5... 0*) -0, Push only V d.c., W VS8SGDFA NO/NC Sol/Spring Internal,5... 0*) -0, Push only 5 V a.c.,5 VA VS8SGDF8A NO/NC Sol/Spring Internal,5... 0*) -0, Push & turn V d.c., W VS8SGDFA NO/NC Sol/Spring Internal,5... 0*) -0, Push & turn 5 V a.c.,5 VA VS8SGDF8A NO/NC Sol/Spring Internal,5... 0*) -0, Extended, Push only V d.c., W VS8SGDF5A NO/NC Sol/Spring Internal,5... 0*) -0, Extended, Push only 5 V a.c.,5 VA VS8SGDF58A NO/NC Sol/Spring External,7 + (0,5 x press. port)*) -0, Push only V d.c., W VS8SGDFA NO/NC Sol/Spring External,7 + (0,5 x press. port)*) -0, Push only 5 V a.c.,5 VA VS8SGDF8A NO/NC Sol/Spring External,7 + (0,5 x press. port)*) -0, Push & turn V d.c., W VS8SGDFA NO/NC Sol/Spring External,7 + (0,5 x press. port)*) -0, Push & turn 5 V a.c.,5 VA VS8SGDF8A NO/NC Sol/Spring External,7 + (0,5 x press. port)*) -0, Extended, Push only V d.c., W VS8SGDF5A NO/NC Sol/Spring External,7 + (0,5 x press. port)*) -0, Extended, Push only 5 V a.c.,5 VA VS8SGDF58A en without notice, the specifications given in this document. ( i) 05 IMI International s.r.o. 08/7

3 VS8 series, x /, x /, 5/ or 5/ x / Double solenoid actuated softseal valves (flow 600 l/min) Symbol Function x / Valve dimensions see page 8 NO = Normally open, NC = Normally closed Actuation/ return Pilot supply Pilot pressure (bar) Operating pressure (bar) Manual override Voltage Model NC Sol/Spring Internal, Push only V d.c., W VS8SADFA NC Sol/Spring Internal, Push only 5 V a.c.,5 VA VS8SADF8A NC Sol/Spring Internal, Push & turn V d.c., W VS8SADFA NC Sol/Spring Internal, Push & turn 5 V a.c.,5 VA VS8SADF8A NC Sol/Spring Internal, Extended, Push only V d.c., W VS8SADF5A NC Sol/Spring Internal, Extended, Push only 5 V a.c.,5 VA VS8SADF58A NC Sol/Spring External,7 + (0,5 x op. press.) Push only V d.c., W VS8SADFA NC Sol/Spring External,7 + (0,5 x op. press.) Push only 5 V a.c.,5 VA VS8SADF8A NC Sol/Spring External,7 + (0,5 x op. press.) Push & turn V d.c., W VS8SADFA NC Sol/Spring External,7 + (0,5 x op. press.) Push & turn 5 V a.c.,5 VA VS8SADF8A NC Sol/Spring External,7 + (0,5 x op. press.) Extended, Push only V d.c., W VS8SADF5A NC Sol/Spring External,7 + (0,5 x op. press.) Extended, Push only 5 V a.c.,5 VA VS8SADF58A NO Sol/Spring Internal, Push only V d.c., W VS8SBDFA NO Sol/Spring Internal, Push only 5 V a.c.,5 VA VS8SBDF8A NO Sol/Spring Internal, Push & turn V d.c., W VS8SBDFA NO Sol/Spring Internal, Push & turn 5 V a.c.,5 VA VS8SBDF8A NO Sol/Spring Internal, Extended, Push only V d.c., W VS8SBDF5A NO Sol/Spring Internal, Extended, Push only 5 V a.c.,5 VA VS8SBDF58A NO Sol/Spring External,7 + (0,5 x op. press.) Push only V d.c., W VS8SBDFA NO Sol/Spring External,7 + (0,5 x op. press.) Push only 5 V a.c.,5 VA VS8SBDF8A NO Sol/Spring External,7 + (0,5 x op. press.) Push & turn V d.c., W VS8SBDFA NO Sol/Spring External,7 + (0,5 x op. press.) Push & turn 5 V a.c.,5 VA VS8SBDF8A NO Sol/Spring External,7 + (0,5 x op. press.) Extended, Push only V d.c., W VS8SBDF5A NO Sol/Spring External,7 + (0,5 x op. press.) Extended, Push only 5 V a.c.,5 VA VS8SBDF58A NO/NC Sol/Spring Internal, Push only V d.c., W VS8SCDFA NO/NC Sol/Spring Internal, Push only 5 V a.c.,5 VA VS8SCDF8A NO/NC Sol/Spring Internal, Push & turn V d.c., W VS8SCDFA NO/NC Sol/Spring Internal, Push & turn 5 V a.c.,5 VA VS8SCDF8A NO/NC Sol/Spring Internal, Extended, Push only V d.c., W VS8SCDF5A NO/NC Sol/Spring Internal, Extended, Push only 5 V a.c.,5 VA VS8SCDF58A NO/NC Sol/Spring External,7 + (0,5 x op. press.) Push only V d.c., W VS8SCDFA NO/NC Sol/Spring External,7 + (0,5 x op. press.) Push only 5 V a.c.,5 VA VS8SCDF8A NO/NC Sol/Spring External,7 + (0,5 x op. press.) Push & turn V d.c., W VS8SCDFA NO/NC Sol/Spring External,7 + (0,5 x op. press.) Push & turn 5 V a.c.,5 VA VS8SCDF8A NO/NC Sol/Spring External,7 + (0,5 x op. press.) Extended, Push only V d.c., W VS8SCDF5A NO/NC Sol/Spring External,7 + (0,5 x op. press.) Extended, Push only 5 V a.c.,5 VA VS8SCDF58A 08/7 without notice, the specifications given in this document. ( i) 05 IMI International s.r.o. en

4 VS8 series, x /, x /, 5/ or 5/ 5/ Single and double solenoid actuated glandless valves (flow 550 l/min) Symbol Valve dimensions see page 8 Actuation/ return Pilot supply Pilot pressure (bar) Operating pressure (bar) Manual override Voltage Model Sol/Sol Internal... 0 Push only V d.c., W VS8G5DFA Sol/Sol Internal... 0 Push only 5 V a.c.,5 VA VS8G5DF8A Sol/Sol Internal... 0 Push & turn V d.c., W VS8G5DFA Sol/Sol Internal... 0 Push & turn 5 V a.c.,5 VA VS8G5DF8A Sol/Sol Internal... 0 Extended, Push only V d.c., W VS8G5DF5A Sol/Sol Internal... 0 Extended, Push only 5 V a.c.,5 VA VS8G5DF58A Sol/Sol External , Push only V d.c., W VS8G5DFA Sol/Sol External , Push only 5 V a.c.,5 VA VS8G5DF8A Sol/Sol External , Push & turn V d.c., W VS8G5DFA Sol/Sol External , Push & turn 5 V a.c.,5 VA VS8G5DF8A Sol/Sol External , Extended, Push only V d.c., W VS8G5DF5A Sol/Sol External , Extended, Push only 5 V a.c.,5 VA VS8G5DF58A Sol(Priority)/Sol Internal... 0 Push only V d.c., W VS8G59DFA Sol(Priority)/Sol Internal... 0 Push only 5 V a.c.,5 VA VS8G59DF8A Sol(Priority)/Sol Internal... 0 Push & turn V d.c., W VS8G59DFA Sol(Priority)/Sol Internal... 0 Push & turn 5 V a.c.,5 VA VS8G59DF8A Sol(Priority)/Sol Internal... 0 Extended, Push only V d.c., W VS8G59DF5A Sol(Priority)/Sol Internal... 0 Extended, Push only 5 V a.c.,5 VA VS8G59DF58A Sol(Priority)/Sol External , Push only V d.c., W VS8G59DFA Sol(Priority)/Sol External , Push only 5 V a.c.,5 VA VS8G59DF8A Sol(Priority)/Sol External , Push & turn V d.c., W VS8G59DFA Sol(Priority)/Sol External , Push & turn 5 V a.c.,5 VA VS8G59DF8A Sol(Priority)/Sol External , Extended, Push only V d.c., W VS8G59DF5A Sol(Priority)/Sol External , Extended, Push only 5 V a.c.,5 VA VS8G59DF58A Sol/Spring Internal, Push only V d.c., W VS8G57DFA Sol/Spring Internal, Push only 5 V a.c.,5 VA VS8G57DF8A Sol/Spring Internal, Push & turn V d.c., W VS8G57DFA Sol/Spring Internal, Push & turn 5 V a.c.,5 VA VS8G57DF8A Sol/Spring Internal, Extended, Push only V d.c., W VS8G57DF5A Sol/Spring Internal, Extended, Push only 5 V a.c.,5 VA VS8G57DF58A Sol/Spring External, , Push only V d.c., W VS8G57DFA Sol/Spring External, , Push only 5 V a.c.,5 VA VS8G57DF8A Sol/Spring External, , Push & turn V d.c., W VS8G57DFA Sol/Spring External, , Push & turn 5 V a.c.,5 VA VS8G57DF8A Sol/Spring External, , Extended, Push only V d.c., W VS8G57DF5A Sol/Spring External, , Extended, Push only 5 V a.c.,5 VA VS8G57DF58A en without notice, the specifications given in this document. ( i) 05 IMI International s.r.o. 08/7

5 VS8 series, x /, x /, 5/ or 5/ 5/ Single and double solenoid actuated softseal valves (flow 650 l/min) Symbol Actuation/ return Pilot supply Pilot pressure (bar) Operating pressure (bar) Manual override Voltage Model Sol/Sol Internal... 0 Push only V d.c., W VS8S5DFA Sol/Sol Internal... 0 Push only 5 V a.c.,5 VA VS8S5DF8A Sol/Sol Internal... 0 Push & turn V d.c., W VS8S5DFA Sol/Sol Internal... 0 Push & turn 5 V a.c.,5 VA VS8S5DF8A Sol/Sol Internal... 0 Extended, Push only V d.c., W VS8S5DF5A Sol/Sol Internal... 0 Extended, Push only 5 V a.c.,5 VA VS8S5DF58A Sol/Sol External , Push only V d.c., W VS8S5DFA Sol/Sol External , Push only 5 V a.c.,5 VA VS8S5DF8A Sol/Sol External , Push & turn V d.c., W VS8S5DFA Sol/Sol External , Push & turn 5 V a.c.,5 VA VS8S5DF8A Sol/Sol External , Extended, Push only V d.c., W VS8S5DF5A Sol/Sol External , Extended, Push only 5 V a.c.,5 VA VS8S5DF58A Sol/Spring Internal... 0 Push only V d.c., W VS8S57DFA Sol/Spring Internal... 0 Push only 5 V a.c.,5 VA VS8S57DF8A Sol/Spring Internal... 0 Push & turn V d.c., W VS8S57DFA Sol/Spring Internal... 0 Push & turn 5 V a.c.,5 VA VS8S57DF8A Sol/Spring Internal... 0 Extended, Push only V d.c., W VS8S57DF5A Sol/Spring Internal... 0 Extended, Push only 5 V a.c.,5 VA VS8S57DF58A Sol/Spring External , Push only V d.c., W VS8S57DFA Sol/Spring External , Push only 5 V a.c.,5 VA VS8S57DF8A Sol/Spring External , Push & turn V d.c., W VS8S57DFA Sol/Spring External , Push & turn 5 V a.c.,5 VA VS8S57DF8A Sol/Spring External , Extended, Push only V d.c., W VS8S57DF5A Sol/Spring External , Extended, Push only 5 V a.c.,5 VA VS8S57DF58A 5/ Double solenoid actuated glandless valves (flow 550 l/min) Symbol Function Actuation/ return Valve dimensions see page 8 APB = All Ports BlockedCOE= Centre Open Exhaust Pilot supply Pilot pressure (bar) Operating pressure (bar) Manual override Voltage Model APB Sol/Sol Internal... 0 Push only V d.c., W VS8G6DFA APB Sol/Sol Internal... 0 Push only 5 V a.c.,5 VA VS8G6DF8A APB Sol/Sol Internal... 0 Push & turn V d.c., W VS8G6DFA APB Sol/Sol Internal... 0 Push & turn 5 V a.c.,5 VA VS8G6DF8A APB Sol/Sol Internal... 0 Extended, Push only V d.c., W VS8G6DF5A APB Sol/Sol Internal... 0 Extended, Push only 5 V a.c.,5 VA VS8G6DF58A APB Sol/Sol External , Push only V d.c., W VS8G6DFA APB Sol/Sol External , Push only 5 V a.c.,5 VA VS8G6DF8A APB Sol/Sol External , Push & turn V d.c., W VS8G6DFA APB Sol/Sol External , Push & turn 5 V a.c.,5 VA VS8G6DF8A APB Sol/Sol External , Extended, Push only V d.c., W VS8G6DF5A APB Sol/Sol External , Extended, Push only 5 V a.c.,5 VA VS8G6DF58A COE Sol/Sol Internal... 0 Push only V d.c., W VS8G7DFA COE Sol/Sol Internal... 0 Push only 5 V a.c.,5 VA VS8G7DF8A COE Sol/Sol Internal... 0 Push & turn V d.c., W VS8G7DFA COE Sol/Sol Internal... 0 Push & turn 5 V a.c.,5 VA VS8G7DF8A COE Sol/Sol Internal... 0 Extended, Push only V d.c., W VS8G7DF5A COE Sol/Sol Internal... 0 Extended, Push only 5 V a.c.,5 VA VS8G7DF58A COE Sol/Sol External , Push only V d.c., W VS8G7DFA COE Sol/Sol External , Push only 5 V a.c.,5 VA VS8G7DF8A COE Sol/Sol External , Push & turn V d.c., W VS8G7DFA COE Sol/Sol External , Push & turn 5 V a.c.,5 VA VS8G7DF8A COE Sol/Sol External , Extended, Push only V d.c., W VS8G7DF5A COE Sol/Sol External , Extended, Push only 5 V a.c.,5 VA VS8G7DF58A 08/7 without notice, the specifications given in this document. ( i) 05 IMI International s.r.o. en

6 VS8 series, x /, x /, 5/ or 5/ 5/ Double solenoid actuated Softseal valves (flow 650 l/min) Symbol Function Actuation/ return Valve dimensions see page 8 APB = All Ports BlockedCOE= Centre Open Exhaust Pilot supply Pilot pressure (bar) Operating pressure (bar) Manual override Voltage Model APB Sol/Sol Internal... 0 Push only V d.c., W VS8S6DFA APB Sol/Sol Internal... 0 Push only 5 V a.c.,5 VA VS8S6DF8A APB Sol/Sol Internal... 0 Push & turn V d.c., W VS8S6DFA APB Sol/Sol Internal... 0 Push & turn 5 V a.c.,5 VA VS8S6DF8A APB Sol/Sol Internal... 0 Extended, Push only V d.c., W VS8S6DF5A APB Sol/Sol Internal... 0 Extended, Push only 5 V a.c.,5 VA VS8S6DF58A APB Sol/Sol External , Push only V d.c., W VS8S6DFA APB Sol/Sol External , Push only 5 V a.c.,5 VA VS8S6DF8A APB Sol/Sol External , Push & turn V c.c., W VS8S6DFA APB Sol/Sol External , Push & turn 5 V a.c.,5 VA VS8S6DF8A APB Sol/Sol External , Extended, Push only V d.c., W VS8S6DF5A APB Sol/Sol External , Extended, Push only 5 V a.c.,5 VA VS8S6DF58A COE Sol/Sol Internal, Push only V d.c., W VS8S7DFA COE Sol/Sol Internal, Push only 5 V a.c.,5 VA VS8S7DF8A COE Sol/Sol Internal, Push & turn V d.c., W VS8S7DFA COE Sol/Sol Internal, Push & turn 5 V a.c.,5 VA VS8S7DF8A COE Sol/Sol Internal, Extended, Push only V d.c., W VS8S7DF5A COE Sol/Sol Internal, Extended, Push only 5 V a.c.,5 VA VS8S7DF58A COE Sol/Sol External, , Push only V d.c., W VS8S7DFA COE Sol/Sol External, , Push only 5 V a.c.,5 VA VS8S7DF8A COE Sol/Sol External, , Push & turn V d.c., W VS8S7DFA COE Sol/Sol External, , Push & turn 5 V a.c.,5 VA VS8S7DF8A COE Sol/Sol External, , Extended, Push only V d.c., W VS8S7DF5A COE Sol/Sol External, , Extended, Push only 5 V a.c.,5 VA VS8S7DF58A Options selector for valve slices Spool technology Substitute Glandless spool & sleeve G Softseal spool S Guiding systems Substitute x / NC *) A x / NO *) B x / NO/NC *) C x / NC *) E x / NO *) F x / NO/NC *) G 5/ 5 5/ APB 6 5/ COE 7 *) Available with softseal spool only (VS8S). VS8 DF Application Substitute Standard environment A ATEX approval *6) E Voltage Substitute V d.c, W (±0%) 5 V a.c,5 VA (-0/+5%) 8 V d.c., W (±0%) on request V d.c.,5 W (-7/+0%) on request V d.c,5 W (-7/+0%) on request Manual override *5) Substitute Push & turn Push only Extended, Push only 5 Actuation/Pilot supply Substitute Solenoid/Spring 7 Internal pilot supply Solenoid/Spring 7 External pilot supply Solenoid/Solenoid Internal pilot supply Solenoid/Solenoid External pilot supply Solenoid priority side /Solenoid 9 (5/ only) Internal pilot supply *) Solenoid priority side /Solenoid 9 (5/ only) External pilot supply *) *) Available with glandless spool & sleeve only (VS8G) *5) Option without manual override available on request. *6) Available with V d.c., W (±0%) only en without notice, the specifications given in this document. ( i) 05 IMI International s.r.o. 08/7

7 VS8 series, x /, x /, 5/ or 5/ Electrical details for solenoid operators Voltage tolerances ( V d.c) +/- 0% Voltage tolerances (5 V a.c) -0%/+5% Rating 00 % Continuous duty Inlet orifice 0,8 mm Indication LED green Surge surpression Transil diode Materials PPS (body), FKM and NBR (seal) Note: Alternative voltage and voltage tolerances see option selector on page 6 Accessories Protection classification (IP Code): All VS8 valve islands fulfill IP65 and NEMA ratings. Power supply and precautions: AII VS8 V d.c products are designed to be used with a protective extra low voltage (PELV) power supply. All VS8 5 V a.c products correspond to the protection class I. Connection of the protective earth (PE) ground is required. UL approval: Recognized to UL 9 for Electrically Operated Valves (not applicable for Industrial Ethernet options). ATEX: The V d.c Multipole and Fieldbus valve islands fulfils the requirement of the standard 0//EU for intended use in hazardous locations. Multipole and Industrial Ethernet versions: II G Ex na IIC T Gc II D Ex tc IIIC T5 C Dc Fieldbus versions: II G Ex na IIC T Gc II D Ex tc IIIB T5 C Dc Equipment group, category, type of protection: The Declaration of Conformity of the valve islands was conducted by IMI Precision Engineering Norgren GmbH, D-707 Fellbach. Please review all ATEX data and notes in the maintenance and instruction booklet to eliminate any risks, allowing for safe function of the valve islands. DIN EN 50 0 rail ( m) DIN-rail mounting kit Blanking disc to modular sub-base Manual override set-up kit Spare valve identification labels *7) Blanking plug for base connector hole *8) Electrical Connection Multipole, Fieldbus and Industrial Ethernet V0009-C00 (5 x 7,5 mm) V705-KA0 *9) VS8705-KF00 (Ports,, 5) VS8706-KF00 (Port /) VS67906-KG00 Industrial Ethernet (only) VS6797-KG00 *7) When purchasing assembled valve islands from IMI Norgren, valve identification labels are already included. *8) When V0/V valves are fitted on VS8 bases. *9) Not suitable for Industrial Ethernet VS67905-KG00 (0 pcs.) VS679-KG00 Base accessories Intermediate supply/ exhaust module Blanking plate Electrical Connection Page Page Multipole, Fieldbus and Industrial Ethernet Industrial Ethernet (only) VS870-AF00 (G/8) VS870-KF00 *9) VS870-PF00 (NPTF /8) VS8707-KF00 Sandwich plates Single pressure regulator plate Double pressure regulator plate Flow regulator plate Sandwich plate with additional pressure port Single valve shut-off plate Page Page Page Page Page VS8700-KF0 (Port ) VS8700-KF0 (Ports +) VS870-KF00 (Ports +5) VS878-KFG00 (G/8) VS870-KF00 (Port ) VS8700-KF0 (Port ) VS8700-KF0 (Port ) Sub-bases and end plates Single station sub-base Double station modular sub-base Single station modular sub-base End plate kit Page 9 Page 5 and 8 Page 5 Page 5 08/7 without notice, the specifications given in this document. ( i) 05 IMI International s.r.o. en

8 5,5 7,5 5,5 8 VS8 series, x /, x /, 5/ or 5/ Valve dimensions VS8*5*7DF*** 5/ Single solenoid pilot valve, mechanical spring return VS8****DF*** x /, x /, 5/ and 5/ Double solenoid, pilot valve Dimensions in mm Projection/First angle M 0 9 5,5 8 7,5 5,5 8 M 0 9,5,5 Manual override en without notice, the specifications given in this document. ( i) 05 IMI International s.r.o. 08/7

9 VS8 series, x /, x /, 5/ or 5/ Single station sub-base Description Ports, & 5 Ports / & 8/8 Ports & Connector type Model Single station sub-base for V d.c. G/8 G/8 G/8 M VS8700-AF00 Single station sub-base for V d.c. NPTF /8 NPTF /8 NPTF /8 M VS8700-PF00 Single station sub-base for V d.c. and 5 V a.c. NPTF /8 NPTF /8 NPTF /8 NPTF/ conduit VS870-PF00 Connector type: NPTF / conduit with flying leads A Dimensions in mm Projection/First angle A 8, ,5,5,5 5 8/8 / 6 / NPTF , Wiring information,5 Wire colour Function Green Earth Yellow Signal for solenoid Black Common for solenoid and Red Signal for solenoid Connector type: M A 85,5 5 6,5,5 5 8/8 / 9,5 M 6,5 7,5 79,5,5 99,5 57 6,5 7, A 85,5,5 7,5 Pin assignment (conforming to DIN ISO 00) Male Pin no. Function Not used Signal for solenoid Common for solenoid and Signal for solenoid 08/7 without notice, the specifications given in this document. ( i) 05 IMI International s.r.o. en

10 VS8 series, x /, x /, 5/ or 5/ Valve island dimensions - Multipole and Fieldbus See page and 5 for sub-base and end plate kit ordering information 60,5 5,5 9,5 Dimensions in mm Projection/First angle 9,5, ,5 96,5, ,5 9 09,5,5 5,5 Dimensions for surface mounting: Slot length =,mm (max. M screws). Clamp length = 5,7mm. Note: Never plug port 8/8. Plugging this port will cause valves to malfunction. 0 N x 9,5 N Number of stations 6,5 9,5 Electrical connection Min. no. of valve stations Max. no. of valve stations For details see page Multipole 0 6 AS-Interface 6 Other Fieldbus protocols 6 9 en without notice, the specifications given in this document. ( i) 05 IMI International s.r.o. 08/7

11 9 VS8 series, x /, x /, 5/ or 5/ Valve island dimensions - Industrial Ethernet See page 8 for sub-base and end plate kit ordering information Dimensions in mm Projection/First angle / 8/8 6,5 96, 5 6 5, 7 65, 9, 9,5 60,5,75 08,9 0, 6,65 9,5 79,5 N x 9,5 5 N Number of stations Electrical connection Min. no. of valve stations Max. no. of valve stations For details see page Industrial Ethernet protocols 0 0 and 08/7 without notice, the specifications given in this document. ( i) 05 IMI International s.r.o. en

12 VS8 series, x /, x /, 5/ or 5/ Sandwich plates Pressure regulator sandwich plates Symbol Model Description VS8700-KF0 Regulation of port, regulator on side Symbol Model Description VS8700-KF0 Regulation of port, regulator on side 5 5 VS8700-KF0 Regulation of port, regulator on side VS8700-KF0 Regulation of ports Dimensions in mm Projection/First angle Flow characteristics for pressure regulator plates bar 96,5 86,5 95 9, qn l / min 58 Regulated pressure (bar) 7 Regulation of port Regulation of port Regulation of port Regulation of port + 5 Gauge 77,5 5 77,5 Spare part number for gauge: V en without notice, the specifications given in this document. ( i) 05 IMI International s.r.o. 08/7

13 VS8 series, x /, x /, 5/ or 5/ Sandwich plates Flow regulator & additional pressure Symbol Model Description VS870-KF00 Flow regulator supplied with gasket, dual regulation of exhaust ports and 5 5 Symbol Model Description VS878-KF00 Sandwich plate with additional pressure port (G/8), supplied with gasket 5 e VS879-KF00 Sandwich plate with additional pressure port (NPTF /8), supplied with gasket Dimensions in mm Projection/First angle 9,5 9,5 5,5 0,5 5,5 5,5 5,5 5,5 Flow characteristics Dual regulation of exhaust ports and 5 Flow regulator plate Sandwich plate with additional pressure port Exhaust flow (ports + 5) Port Port Number of turns from close Flow: Port > and >: remains unchanged. Flow measured at 6 bar inlet, pressure drop bar 08/7 without notice, the specifications given in this document. ( i) 05 IMI International s.r.o. en

14 VS8 series, x /, x /, 5/ or 5/ Sandwich plates Single valve shut-off plate Symbol Model Description VS870-KF00 Single valve shut-off plate supplied with gasket Base accessories Model Description VS870-AF00 Intermediate supply/exhaust module, port size G/8 *9) VS870-PF00 Intermediate supply/exhaust module, port size NPTF /8 *9) VS870-KF00 Blanking plate for blocking of unused stations (supplied with gasket) *9) for use see page 5 5 Allows individual exchange of valve while valve island is pressurised by port - enabling unbroken production in a continuously operating process. Flow restricted to max. 0 l/min. Dimensions in mm Projection/First angle 0,5 6 5,5 98,5 0 9, ,5 0,5 Single valve shut-off plate Intermediate supply/exhaust module Blanking plate en without notice, the specifications given in this document. ( i) 05 IMI International s.r.o. 08/7

15 VS8 series, x /, x /, 5/ or 5/ Multi pressure configurations A Blanking disc Type VS8705-KF00 Suitable for ports, and/or 5 B Intermediate supply/exhaust module Type VS870-AF00 G/8 VS870-PF00 NPTF /8 Dual pressure Dimensions in mm Projection/First angle Pressure Pressure A Multi pressure Pressure Pressure Pressure Pressure A B A B A B A 08/7 without notice, the specifications given in this document. ( i) 05 IMI International s.r.o. en

16 VS8 series, x /, x /, 5/ or 5/ Multipole options Connector type Voltage No. of stations Max. no. solenoids D-Sub 9-pin V d.c. 0/0/0 8 D-Sub 5-pin V d.c. 0/0/0/05/06/07 D-Sub 5-pin V d.c. 0/0/0/05/06/07/08/09/0// D-Sub -pin V d.c. 08/09/0/////5/6/7/8/9/0 0 M 9-pin 5 V a.c., V d.c. 0/0/0/05/06/07/08 6 NPTF Conduit entry with terminals 5 V a.c., V d.c. 0/0/0/05/06/07/08/09/0// For valve islands with valve stations, please contact our customer service. For details of single parts see pages 6 and 7. D-Sub 9-pin,5 D-Sub 5-pin,5 Dimensions in mm Projection/First angle,5 5,5 D-Sub 5- / -pin 6 M 9-pin, M NPTF Conduit entry with terminals 6 7,5,5 Maximum wire size AWG8 en without notice, the specifications given in this document. ( i) 05 IMI International s.r.o. 08/7

17 VS8 series, x /, x /, 5/ or 5/ Multipole accessories Cable length D-Sub connector 9-pin IP65 *0) D-Sub connector 5-pin IP65 *0) D-Sub connector 5-pin IP65 *0) D-Sub connector -pin IP65 *0) M connector 9-pin IP65 *0) m VS6790-KG00 VS6795-KG00 V569-E0 V570-E0 VS679-KG00 m VS679-KG00 VS6796-KG00 V569-E0 V570-E0 VS679-KG00 5 m VS679-KG00 VS6797-KG00 V569-E05 V570-E05 VS6795-KG00 *0) Required for ATEX For cable length longer than 5 m please contact customer service. D-Sub connector 9-pin *) Pin no. Wire colour Socket Pilot Station White Solenoid -a Brown Solenoid -a Green Solenoid -a Yellow Solenoid -a 5 Grey Solenoid -b 6 Pink Solenoid -b 7 Blue Solenoid -b 8 Red Solenoid -b 9 Black Common D-Sub connector 5-pin *) Pin no. Wire colour Socket Pilot Station White Solenoid -a Brown Solenoid -a Green Solenoid -a Yellow Solenoid -a 5 Grey Solenoid 5-a 5 6 Pink Solenoid 6-a 6 7 Blue Solenoid 7-a 7 8 Red Solenoid -b 9 Black Solenoid -b 0 Violet Solenoid -b Grey/Pink Solenoid -b Red/Blue Solenoid 5-b 5 White/Green Solenoid 6-b 6 Brown/Green Solenoid 7-b 7 5 White/Yellow Common *) According to IEC60757 D-Sub connector 5-pin *) Pin no. Wire colour Socket Pilot Station White Solenoid -a Brown Solenoid -a Green Solenoid -a Yellow Solenoid -a 5 Grey Solenoid 5-a 5 6 Pink Solenoid 6-a 6 7 Blue Solenoid 7-a 7 8 Red Solenoid 8-a 8 9 Black Solenoid 9-a 9 0 Violet Solenoid 0-a 0 Grey/Pink Solenoid -a Red/Blue Solenoid -a White/Green Common - - Brown/Green Solenoid -b 5 White/Yellow Solenoid -b 6 Yellow/Brown Solenoid -b 7 White/Grey Solenoid -b 8 Grey/Brown Solenoid 5-b 5 9 White/Pink Solenoid 6-b 6 0 Pink/Brown Solenoid 7-b 7 White/Blue Solenoid 8-b 8 Brown/Blue Solenoid 9-b 9 White/Red Solenoid 0-b 0 Brown/Red Solenoid -b 5 White/Black Solenoid -b 08/7 without notice, the specifications given in this document. ( i) 05 IMI International s.r.o. en

18 VS8 series, x /, x /, 5/ or 5/ D-Sub connector -pin *) Pin no. Wire colour Socket Pilot Station White Solenoid a Brown Solenoid a Green Solenoid a Yellow Solenoid a 5 Grey Solenoid 5 a 5 6 Pink Solenoid 6 a 6 7 Blue Solenoid 7 a 7 8 Red Solenoid 8 a 8 9 Black Solenoid 9 a 9 0 Violet Solenoid 0 a 0 Grey/Pink Solenoid a Red/Blue Solenoid a White/Green Solenoid a Brown/Green Solenoid a 5 White/Yellow Solenoid 5 a 5 6 Yellow/Brown Solenoid b 7 White/Grey Solenoid b 8 Grey/Brown Solenoid b 9 White/Pink Solenoid b 0 Pink/Brown Solenoid 5 b 5 White/Blue Solenoid 6 b 6 Brown/Blue Solenoid 7 b 7 White/Red Solenoid 8 b 8 Brown/Red Solenoid 9 b 9 5 White/Black Solenoid 0 b 0 6 Brown/Black Solenoid b 7 Grey/Green Solenoid b 8 Yellow/Grey Solenoid b 9 Pink/Green Solenoid b 0 Yellow/Pink Solenoid 5 b 5 Green/Blue Solenoid 6 a 6 Yellow/Blue Solenoid 6 b 6 Not used Not used 5 Not used 6 Not used 7 Not used 8 Not used 9 Not used 0 Not used Not used Not used Blue/Black *) Common Red/Black *) Common *) According to IEC60757 *) The IMI Norgren D-Sub -pin cables (see part numbers on page 6) do not have wires, but only wires. Therefore, the wires associated with pins through are according to IEC60757, wires and differ from the standard and are coloured in green/black and yellow/black. M connector 9-pin Pin no. Wire colour Socket Pilot Station White Solenoid 8-a 8 Green/Brown Solenoid 6-a 6 Green Solenoid -a Yellow Solenoid -b 5 Grey Solenoid -a 6 Blue(thick) Common 7 White/Grey Solenoid -b 8 Red Solenoid -b 9 Black Solenoid 5-b 5 0 Violet Solenoid 7-b 7 Grey/Pink Solenoid 7-a 7 Yellow/Green Earth White/Green Solenoid 6-b 6 Brown/Green Solenoid -b 5 White/Yellow Solenoid -a 6 Yellow/Brown Solenoid -a 7 Pink Solenoid 5-a 5 8 Red/Blue Solenoid 8-b 8 9 Brown(thick) Not used NPTF Conduit entry with terminals *) Pin no. Socket Pilot Station C Solenoid -a C Solenoid -a C Solenoid -a C Solenoid -a C5 Solenoid 5-a 5 C6 Solenoid 6-a 6 C7 Solenoid 7-a 7 C8 Solenoid 8-a 8 C9 Solenoid 9-a 9 C0 Solenoid 0-a 0 C Solenoid -a C Solenoid -a C Solenoid -b C Solenoid -b C5 Solenoid -b C6 Solenoid -b C7 Solenoid 5-b 5 C8 Solenoid 6-b 6 C9 Solenoid 7-b 7 C0 Solenoid 8-b 8 C Solenoid 9-b 9 C Solenoid 0-b 0 C Solenoid -b C Solenoid -b C5 Common C6 Common C7 Earth C8 Earth *) Max.wire size AWG8 en without notice, the specifications given in this document. ( i) 05 IMI International s.r.o. 08/7

19 VS8 series, x /, x /, 5/ or 5/ Fieldbus and Industrial Ethernet options: Overview Protocol Communications Connector Power connector No. of stations Max. no. solenoids PROFIBUS DP x D-Sub; 9-pin M; -pin 0/05/06/07/08/09/0/////5/6 x M; 5-pin M; -pin 0/05/06/07/08/09/0/////5/6 x M; 5-pin 7/8; 5-pin 0/05/06/07/08/09/0/////5/6 PROFINET IRT x M; -pin M; 5-pin 0/06/08/0///6/8/0 0 DeviceNet x M; 5-pin M; -pin 0/05/06/07/08/09/0/////5/6 EtherNet/IP x M; -pin M; 5-pin 0/06/08/0///6/8/0 0 CANopen x M; 5-pin M; -pin 0/05/06/07/08/09/0/////5/6 Interbus-S x D-Sub; 9-pin M; -pin 0/05/06/07/08/09/0/////5/6 AS-Interface-Singleslave x M; -pin M; -pin 0/0/0 AS-Interface-Doubleslave x M; -pin M; -pin 0/05/06/07/08 8 For parts and assembly instructions of Fieldbus and Industrial Ethernet components, consult our technical service. Fieldbus protocol: PROFIBUS DP Connector: x D-Sub 9-pin / x M -pin M,5 5 6,5 Bus connector: D-Sub 9-pin Female Bus in/out Pin no. Function Shield N/C B-line (red) RxD / TxD-P N/C 5 DGND (OVI) isolated 6 VP (5VI) isolated 7 N/C 8 A-line (green) RxD / TxD-N N/C 9 N/C Power connector: M -pin A-coded Male Pin no. Function Tolerance Max. current VB logic ±5% 00 ma circuit supply VA valves ±0% *) 0 V *5) Earth Fieldbus protocol: PROFIBUS DP Connector: x M 5-pin / x M -pin M M M,5 59 7,5 6 Bus connector: M 5-pin B-coded Male Bus in Female Bus out Pin no. Function 5 VI Opto isolator A-line (green) 0 VI Opto isolated B-line (red) 5 Shield Threaded joint Shield Power connector: M -pin A-coded Male Pin no. Function Tolerance Max. current VB logic ±5% 00 ma circuit supply VA valves ±0% *) 0 V *5) Earth *) Imax = 0 ma + n*60 ma n = number of energized solenoids *5) Imax = IVA + IVB 08/7 without notice, the specifications given in this document. ( i) 05 IMI International s.r.o. en

20 VS8 series, x /, x /, 5/ or 5/ Fieldbus protocol: PROFIBUS DP Connector: x M 5-pin / x 7/8 5-pin M 6 UN M,5 60,5 8,5 9 8,5 5 9,5 Bus connector: M 5-pin B-coded Male Bus in Female Bus out Power connector: 7/8 5-pin Pin no. Function 5VI isolated A-line (green) OVI isolated B-line (red) 5 Shield Threaded joint Shield Male Pin no. Function Tolerance Max. current 0 V *7) Earth 5 VA valves ±0% *6) 5 VB logic circuit supply ±5% 00 ma Industrial Ethernet protocol: PROFINET IRT Connector: x M -pin / x M 5-pin Bus connector: M -pin D-coded Female Pin no. Function Transmission data + (TD +) 88 Receive data + (RD+) Transmission data - (TD-) Receive data - (RD-) Housing FE (functional earth) 9 6 M M M 6 9 Power connector: M 5-pin A-coded Male Pin no. Function Tolerance Max. current L (VB+) V electronics power supply 0% max. 50 ma N (VA-) 0V valves power supply N (VB-) 0V electronics power supply L (VA+) V valves power supply 0% max. 5 ma + 70 ma x n 5 FE (functional earth) (n = number of switched valves) Fieldbus protocol: DeviceNet Connector: x M 5-pin / x M -pin M M, Bus connector: M 5-pin A-coded Male Bus in/out Pin no. Function Tolerance Max. current Drain V+ V *) ±5% 00mA V- 0 V *) CAN_H 5 CAN_L Power connector: M -pin A-coded Male Pin no. Function Tolerance Max. current VA valves ±0% *0) 0 V *) Earth en without notice, the specifications given in this document. ( i) 05 IMI International s.r.o. 08/7

21 6 VS8 series, x /, x /, 5/ or 5/ Industrial Ethernet protocol: EtherNet/IP Connector: x M -pin / x M 5-pin Bus connector: M -pin D-coded Female Pin no. Function Transmission data + (TD +) Receive data + (RD+) 88 Transmission data - (TD-) Receive data - (RD-) Housing FE (functional earth) M M M Power connector: M 5-pin A-coded Male Pin no. Function Tolerance Max. current L (VB+) V 0% max. 50 ma electronics power supply N (VA-) 0V valves power supply (n = number of switched valves) N (VB-) 0V electronics power supply L (VA+) V valves power supply 5 FE (functional earth) 0% max. 5 ma + 70 ma x n Fieldbus protocol: CANopen Connector: x M 5-pin / x M -pin M M, Bus connector: M 5-pin A-coded Male Bus in/out Pin no. Function Tolerance Max. current Drain V+ V *) ±5% 00mA V- 0 V *) CAN_H 5 CAN_L Power connector: M -pin A-coded Male Pin no. Function Tolerance Max. current VA valves ±0% *0) 0 V *) Earth *0) Imax = 0 ma + n*60 ma *) Imax = IVA + IVB *) Must be galvanic isolated to VA valves n = number of energized solenoids 08/7 without notice, the specifications given in this document. ( i) 05 IMI International s.r.o. en

22 VS8 series, x /, x /, 5/ or 5/ Fieldbus protocol: Interbus-S Connector: x D-Sub 9-pin / x M -pin M, ,5 5, Bus connector: D-Sub 9-pin Male Bus in Female Bus out Pin no. Power connector: M -pin A-coded Function male DO DO DI DI OVI OVI 5 6 /DO /DO 7 /DI /DI 8 9 Function female Male Pin no. Function Tolerance Max. current VB logic ±5% 00 ma circuit supply VA valves ±0% *6) 0 V *7) Earth Fieldbus protocol: AS-Interface Connector: x M -pin/ x M -pin,5 Bus connector: M -pin A-coded Male Bus in/out Pin no. Function Max. current AS-I+ *8) AS-I- M M 59 0 Power connector: M -pin A-coded Male Pin no. Function Tolerance Max. current V d.c. ±0% *9) 0 V *6) Imax = 0 ma + n*60 ma *7) Imax = IVA + IVB *8) Single slave: 0 ma; Double slave: 75 ma *9) Single slave: Imax = 0 ma + n*60 ma; Double slave: Imax = 5 ma + n*60 ma n = number of energized solenoids en without notice, the specifications given in this document. ( i) 05 IMI International s.r.o. 08/7

23 VS8 series, x /, x /, 5/ or 5/ Fieldbus accessories Fieldbus power connector Description Connection Cable length Protection class Model PROFIBUS DP (-pin, female) Interbus-S (-pin, female) DeviceNet (-pin, female) CANopen (-pin, female) M Wireable IP65 Required for ATEX V588-E0 PROFIBUS DP (5-pin, female) 7/8 Wireable IP65 Required for ATEX VS67907-KG00 Communication cable and connector DeviceNet (5-pin, female) CANopen (5-pin, female) M Wireable IP65 Required for ATEX V589-E0 PROFIBUS DP, reverse keyway (5-pin, female) PROFIBUS DP, reverse keyway (5-pin, male) M Wireable IP65 Required for ATEX M Wireable IP65 Required for ATEX V590-E0 V59-E0 PROFIBUS DP connector (9-pin, male) with terminating resistor D-Sub Wireable IP0 V65-E0 PROFIBUS DP terminating resistor (male) M - IP65 Required for ATEX V59-E0 AS-Interface power or communications (-pin, female) M Wireable IP65 VEASCN-M00 08/7 without notice, the specifications given in this document. ( i) 05 IMI International s.r.o. en

24 VS8 series, x /, x /, 5/ or 5/ Multipole and Fieldbus component parts A - Single add-on stations including PCB, sub-base, gasket and screws Ports & Description Model G/8 Add-on station for D-Sub connectors and Fieldbus VS8700-AFF0 NPTF /8 Add-on station for D-Sub connectors and Fieldbus VS8700-PFF0 PIF6 mm Add-on station for D-Sub connectors and Fieldbus VS8700-6FF0 PIF8 mm Add-on station for D-Sub connectors and Fieldbus VS8700-8FF0 PIF/ Add-on station for D-Sub connectors and Fieldbus VS8700-FF0 G/8 Add-on station for Conduit entry and M connector VS87005-AFF0 NPTF /8 Add-on station for Conduit entry and M connector VS87005-PFF0 PIF6 mm Add-on station for Conduit entry and M connector VS FF0 PIF8 mm Add-on station for Conduit entry and M connector VS FF0 PIF/ Add-on station for Conduit entry and M connector VS87005-FF0 Valves and accessories to be ordered separately, see pages... 7 Step A Step Torque = 0,8... 0,9 Nm Screwdriver speed = max. 00 r.p.m Torque = 0,8... 0,9 Nm Screwdriver speed = max. 00 r.p.m For detailed assembly instructions, please see maintenance & instruction booklet en without notice, the specifications given in this document. ( i) 05 IMI International s.r.o. 08/7

25 VS8 series, x /, x /, 5/ or 5/ Multipole and Fieldbus component parts End plate kits, sub-bases (without PCB s) including screws and gaskets A End plate kit Description Ports, + 5 Ports / + 8/8 Model End plate kit for Multipole G/ G/8 VS87000-BFC0 End plate kit for Multipole NPTF/ NPTF /8 VS87000-RFC0 End plate kit for Fieldbus G/ G/8 VS8700-BFC0 End plate kit for Fieldbus NPTF/ NPTF /8 VS8700-RFC0 B Double station modular sub-base Ports Model + G/8 VS8700-AFF0 NPTF /8 VS8700-PFF0 PIF6 mm VS8700-6FF0 PIF8 mm VS8700-8FF0 PIF/ VS8700-FF0 C Single station modular sub-base Ports Model + G/8 VS8700-AFF0 NPTF /8 VS8700-PFF0 PIF6 mm VS8700-6FF0 PIF8 mm VS8700-8FF0 PIF/ VS8700-FF0 A C B A Torque = 0,8... 0,9 Nm Screwdriver speed = max. 00 r.p.m Note: Never plug port 8/8. Plugging this port will cause valves to malfunction. For detailed assembly instructions, please see maintenance & instruction booklet. Spare parts Quantity per slice Description Model Hexagon socket screw M x Gasket Connector-kit gasket on end plate /7 without notice, the specifications given in this document. ( i) 05 IMI International s.r.o. en

26 VS8 series, x /, x /, 5/ or 5/ Multipole component parts A Output boards with D-Sub connectors Connector type Description Expandable to max. x no. of stations Voltage D-Sub 9-pin Multipole PCB stations V d.c. VS877-KF00 D-Sub 5-pin Multipole PCB stations 6 V d.c. VS878-KF00 D-Sub 5-pin Multipole PCB stations 7 V d.c. VS8705-KF00 D-Sub 5-pin Multipole PCB stations 6 V d.c. VS879-KF00 D-Sub 5-pin Multipole PCB stations 8 V d.c. VS8700-KF00 D-Sub 5-pin Multipole PCB 6 stations 0 V d.c. VS870-KF00 D-Sub 5-pin Multipole PCB 8 stations V d.c. VS870-KF00 D-Sub -pin Multipole PCB 8 stations V d.c. VS870-KF00 D-Sub -pin Multipole PCB 0 stations V d.c. VS8706-KF00 D-Sub -pin Multipole PCB stations 6 V d.c. VS870-KF00 D-Sub -pin Multipole PCB 6 stations 0 V d.c. VS8707-KF00 Valves and accessories to be ordered separately, see pages... 7 Expansion output boards for D-Sub connectors Description Voltage Model Multipole PCB station V d.c. VS8755-KF00 Multipole PCB stations V d.c. VS87-KF00 Model A Torque = 0,8... 0,9 Nm Screwdriver speed = max. 00 r.p.m For detailed assembly instructions, please see maintenance & instruction booklet en without notice, the specifications given in this document. ( i) 05 IMI International s.r.o. 08/7

27 VS8 series, x /, x /, 5/ or 5/ Multipole and conduit entry component parts including screws and gaskets A End plate kit Description Voltage Model E-Connector-kit NPTF Conduit entry 5 V a.c., V d.c. VS677-KG00 Expansion output boards for conduit entry and M connector Description Voltage Model Multipole PCB station 5 V a.c., V d.c. VS8756-KF00 Multipole PCB stations 5 V a.c., V d.c. VS875-KF00 B Output boards for conduit entry and M connector Description Expandable to max. x no. of stations Voltage Model Multipole PCB stations 6 5 V a.c., V d.c. VS8708-KF00 Multipole PCB stations 8 5 V a.c., V d.c. VS8709-KF00 Multipole PCB 6 stations 0 5 V a.c., V d.c. VS870-KF00 Multipole PCB 8 stations 5 V a.c., V d.c. VS87-KF00 C Connector-kit for M connector Description Voltage Model E-Connector-kit M connector 9-pin 5 V a.c., V d.c. VS677-KG00 A B B C Torque = 0,8... 0,9 Nm Screwdriver speed = max. 00 r.p.m For detailed assembly instructions, please see maintenance & instruction booklet 08/7 without notice, the specifications given in this document. ( i) 05 IMI International s.r.o. en

28 VS8 series, x /, x /, 5/ or 5/ Industrial Ethernet expansion - double station sub-base A B A Two station PCB Description Ethernet two station expansion PCB Model VS876-KF00 B Double station modular sub-base Ports Model + G/8 VS8700-AFF0 NPTF /8 VS8700-PFF0 PIF6 mm VS8700-6FF0 PIF8 mm VS8700-8FF0 PIF/ VS8700-FF0 Additionally available PCBs Description Ethernet four station PCB Single station blank PCB (no valve connections) Model VS876-KF00 VS876-KF00 en without notice, the specifications given in this document. ( i) 05 IMI International s.r.o. 08/7

29 VS8 series, x /, x /, 5/ or 5/ Part numbering for complete valve islands VS8 00- Number of stations* Substitute stations 0 stations 0 stations 0 stations 0 5 stations 05 6 stations 06 7 stations 07 8 stations 08 9 stations 09 0 stations 0 stations stations stations stations 5 stations 5 6 stations 6 7 stations 7 8 stations 8 9 stations 9 0 stations 0 Electrical connection Single Station Multipole D-Sub 9 pin Multipole D-Sub 5 pin Multipole D-Sub 5 pin Multipole M 9 pin Multipole D-Sub pin Conduit NPT PROFIBUS DP PROFINET IRT DeviceNet EtherNet/IP CANopen Interbus-S AS Interface Substitute * Multipole: to 0 stations Fieldbus: to 6 stations Industrial Ethernet: to 0 stations AS Interface: to 8 stations / to 8 stations SS M9 M M M M CD PB PN DN EP CO IN AS To be defined by online Valve Island configurator based on valve slice selection To configure and order a valve island visit /7 without notice, the specifications given in this document. ( i) 05 IMI International s.r.o. en

30 VS8 series, x /, x /, 5/ or 5/ Descriptions and short codes for valve slices used in the Valve Island configurator Function x / softseal Actuation / return Pilot supply Manual override Voltage Short code Model ATEX Short code ATEX Model NC Sol/Spring Internal Push only V d.c., W STU VS8SEDFA XTU VS8SEDFE NC Sol/Spring Internal Push only 5 V a.c.,5 VA TTU VS8SEDF8A - - NC Sol/Spring Internal Push & turn V d.c., W STT VS8SEDFA XTT VS8SEDFE NC Sol/Spring Internal Push & turn 5 V a.c.,5 VA TTT VS8SEDF8A - - NC Sol/Spring Internal Extended, Push only V d.c., W STE VS8SEDF5A XTE VS8SEDF5E NC Sol/Spring Internal Extended, Push only 5 V a.c.,5 VA TTE VS8SEDF58A - - NC Sol/Spring External Push only V d.c., W SWU VS8SEDFA XWU VS8SEDFE NC Sol/Spring External Push only 5 V a.c.,5 VA TWU VS8SEDF8A - - NC Sol/Spring External Push & turn V d.c., W SWT VS8SEDFA XWT VS8SEDFE NC Sol/Spring External Push & turn 5 V a.c.,5 VA TWT VS8SEDF8A - - NC Sol/Spring External Extended, Push only V d.c., W SWE VS8SEDF5A XWE VS8SEDF5E NC Sol/Spring External Extended, Push only 5 V a.c.,5 VA TWE VS8SEDF58A - - NO Sol/Spring Internal Push only V d.c., W SUU VS8SFDFA XUU VS8SFDFE NO Sol/Spring Internal Push only 5 V a.c.,5 VA TUU VS8SFDF8A - - NO Sol/Spring Internal Push & turn V d.c., W SUT VS8SFDFA XUT VS8SFDFE NO Sol/Spring Internal Push & turn 5 V a.c.,5 VA TUT VS8SFDF8A - - NO Sol/Spring Internal Extended, Push only V d.c., W SUE VS8SFDF5A XUE VS8SFDF5E NO Sol/Spring Internal Extended, Push only 5 V a.c.,5 VA TUE VS8SFDF58A - - NO Sol/Spring External Push only V d.c., W SXU VS8SFDFA XXU VS8SFDFE NO Sol/Spring External Push only 5 V a.c.,5 VA TXU VS8SFDF8A - - NO Sol/Spring External Push & turn V d.c., W SXT VS8SFDFA XXT VS8SFDFE NO Sol/Spring External Push & turn 5 V a.c.,5 VA TXT VS8SFDF8A - - NO Sol/Spring External Extended, Push only V d.c., W SXE VS8SFDF5A XXE VS8SFDF5E NO Sol/Spring External Extended, Push only 5 V a.c.,5 VA TXE VS8SFDF58A - - NO/NC Sol/Spring Internal Push only V d.c., W SVU VS8SGDFA XVU VS8SGDFE NO/NC Sol/Spring Internal Push only 5 V a.c.,5 VA TVU VS8SGDF8A - - NO/NC Sol/Spring Internal Push & turn V d.c., W SVT VS8SGDFA XVT VS8SGDFE NO/NC Sol/Spring Internal Push & turn 5 V a.c.,5 VA TVT VS8SGDF8A - - NO/NC Sol/Spring Internal Extended, Push only V d.c., W SVE VS8SGDF5A XVE VS8SGDF5E NO/NC Sol/Spring Internal Extended, Push only 5 V a.c.,5 VA TVE VS8SGDF58A - - NO/NC Sol/Spring External Push only V d.c., W SYU VS8SGDFA XYU VS8SGDFE NO/NC Sol/Spring External Push only 5 V a.c.,5 VA TYU VS8SGDF8A - - NO/NC Sol/Spring External Push & turn V d.c., W SYT VS8SGDFA XYT VS8SGDFE NO/NC Sol/Spring External Push & turn 5 V a.c.,5 VA TYT VS8SGDF8A - - NO/NC Sol/Spring External Extended, Push only V d.c., W SYE VS8SGDF5A XYE VS8SGDF5E NO/NC Sol/Spring External Extended, Push only 5 V a.c.,5 VA TYE VS8SGDF58A - - en without notice, the specifications given in this document. ( i) 05 IMI International s.r.o. 08/7

31 VS8 series, x /, x /, 5/ or 5/ Function x / softseal Actuation / return Pilot supply Manual override Voltage Short code Model ATEX Short code ATEX Model NC Sol/Spring Internal Push only V d.c., W SAU VS8SADFA XAU VS8SADFE NC Sol/Spring Internal Push only 5 V a.c.,5 VA TAU VS8SADF8A - - NC Sol/Spring Internal Push & turn V d.c., W SAT VS8SADFA XAT VS8SADFE NC Sol/Spring Internal Push & turn 5 V a.c.,5 VA TAT VS8SADF8A - - NC Sol/Spring Internal Extended, Push only V d.c., W SAE VS8SADF5A XAE VS8SADF5E NC Sol/Spring Internal Extended, Push only 5 V a.c.,5 VA TAE VS8SADF58A - - NC Sol/Spring External Push only V d.c., W SDU VS8SADFA XDU VS8SADFE NC Sol/Spring External Push only 5 V a.c.,5 VA TDU VS8SADF8A - - NC Sol/Spring External Push & turn V d.c., W SDT VS8SADFA XDT VS8SADFE NC Sol/Spring External Push & turn 5 V a.c.,5 VA TDT VS8SADF8A - - NC Sol/Spring External Extended, Push only V d.c., W SDE VS8SADF5A XDE VS8SADF5E NC Sol/Spring External Extended, Push only 5 V a.c.,5 VA TDE VS8SADF58A - - NO Sol/Spring Internal Push only V d.c., W SBU VS8SBDFA XBU VS8SBDFE NO Sol/Spring Internal Push only 5 V a.c.,5 VA TBU VS8SBDF8A - - NO Sol/Spring Internal Push & turn V d.c., W SBT VS8SBDFA XBT VS8SBDFE NO Sol/Spring Internal Push & turn 5 V a.c.,5 VA TBT VS8SBDF8A - - NO Sol/Spring Internal Extended, Push only V d.c., W SBE VS8SBDF5A XBE VS8SBDF5E NO Sol/Spring Internal Extended, Push only 5 V a.c.,5 VA TBE VS8SBDF58A - - NO Sol/Spring External Push only V d.c., W SEU VS8SBDFA XEU VS8SBDFE NO Sol/Spring External Push only 5 V a.c.,5 VA TEU VS8SBDF8A - - NO Sol/Spring External Push & turn V d.c., W SET VS8SBDFA XET VS8SBDFE NO Sol/Spring External Push & turn 5 V a.c.,5 VA TET VS8SBDF8A - - NO Sol/Spring External Extended, Push only V d.c., W SEE VS8SBDF5A XEE VS8SBDF5E NO Sol/Spring External Extended, Push only 5 V a.c.,5 VA TEE VS8SBDF58A - - NO/NC Sol/Spring Internal Push only V d.c., W SCU VS8SCDFA XCU VS8SCDFE NO/NC Sol/Spring Internal Push only 5 V a.c.,5 VA TCU VS8SCDF8A - - NO/NC Sol/Spring Internal Push & turn V d.c., W SCT VS8SCDFA XCT VS8SCDFE NO/NC Sol/Spring Internal Push & turn 5 V a.c.,5 VA TCT VS8SCDF8A - - NO/NC Sol/Spring Internal Extended, Push only V d.c., W SCE VS8SCDF5A XCE VS8SCDF5E NO/NC Sol/Spring Internal Extended, Push only 5 V a.c.,5 VA TCE VS8SCDF58A - - NO/NC Sol/Spring External Push only V d.c., W SFU VS8SCDFA XFU VS8SCDFE NO/NC Sol/Spring External Push only 5 V a.c.,5 VA TFU VS8SCDF8A - - NO/NC Sol/Spring External Push & turn V d.c., W SFT VS8SCDFA XFT VS8SCDFE NO/NC Sol/Spring External Push & turn 5 V a.c.,5 VA TFT VS8SCDF8A - - NO/NC Sol/Spring External Extended, Push only V d.c., W SFE VS8SCDF5A XFE VS8SCDF5E NO/NC Sol/Spring External Extended, Push only 5 V a.c.,5 VA TFE VS8SCDF58A /7 without notice, the specifications given in this document. ( i) 05 IMI International s.r.o. en

VS26 series, 2 x 2/2, 2 x 3/2, 5/2 or 5/3 ISO valve islands

VS26 series, 2 x 2/2, 2 x 3/2, 5/2 or 5/3 ISO valve islands > Modular system offering a wide range of configuration options conforming to ISO 5407-, Size 6 mm > 4 V d.c. or 5 V a.c. Multipole and single station sub-base > Integrated Fieldbus and Industrial Ethernet

More information

VAL-2. Plug-in Mini ISO Valves 2x2/2, 2x3/2, 5/2 and 5/3 valves ISO , Size 18 mm. Technical data

VAL-2. Plug-in Mini ISO Valves 2x2/2, 2x3/2, 5/2 and 5/3 valves ISO , Size 18 mm. Technical data Valve Manifolds VS8 Series x/, x/, 5/ and 5/ valves ISO 507-, Size 8 mm V DC or 5V C Multipole Integrated Fieldbus Field expandable with single addon stations Dual spool technology VS8G Glandless spool

More information

VAL-26. Valve Manifolds VS26 Series Plug-in Mini ISO Valves 2x2/2, 2x3/2, 5/2 and 5/3 valves ISO Size 26 mm VALVES

VAL-26. Valve Manifolds VS26 Series Plug-in Mini ISO Valves 2x2/2, 2x3/2, 5/2 and 5/3 valves ISO Size 26 mm VALVES Valve Manifolds VS6 Series x/, x/, 5/ and 5/ valves ISO 507- Size 6 mm V DC or 5V C Multipole Integrated Fieldbus Field expandable with single addon stations Dual spool technology VS6G Glandless spool

More information

VS45 Series valve islands 2x3/2, 5/2 and 5/3 valves Size 45 mm

VS45 Series valve islands 2x3/2, 5/2 and 5/3 valves Size 45 mm VS Series valve islands x/, / and / valves Size mm V d.c. Multipole Integrated Fieldbus Field expandable with single add-on stations Dual spool technology VSG Glandless spool and sleeve for long life VSS

More information

VS KG00E REVISION E MAY 2007 MAINTENANCE & INSTRUCTION BOOKLET

VS KG00E REVISION E MAY 2007 MAINTENANCE & INSTRUCTION BOOKLET VS2672926-KG00E REVISION E MAY 2007 VS18/VS26 VALVE ADVANTAGE MAINTENANCE & INSTRUCTION BOOKLET 1 CONTENT 1 CONTENT...2 2 VS18/VS26-SYSTEM OVERVIEW...5 3 SAFETY, WARNING...6 4 TECHNICAL DATA...8 4.1 SPECIFICATION...8

More information

1/4" PIF 1 5/16" PIF 5 3/8" PIF 2 6 mm PIF 6 8 mm PIF 8 10 mm PIF Y No PIF (for Pneumapole) 7*

1/4 PIF 1 5/16 PIF 5 3/8 PIF 2 6 mm PIF 6 8 mm PIF 8 10 mm PIF Y No PIF (for Pneumapole) 7* Valve Islands VM5 Series Valve slices x/, 5/ and 5/ with integral push-in fittings Multipole or individually wired for installation flexibility Interchangeable Fieldbus compatible modules Compact and lightweight

More information

Valve Islands VM15 Series

Valve Islands VM15 Series Valve Islands VM Series Valve slices x /, / and / With integral push-in fittings Ø 6 mm, 8 mm and 0 mm Multipole or individually wired for installation flexibility Interchangeable Fieldbus compatible modules

More information

VS 45 series, 2 x 3/2, 5/2 or 5/3 Valve islands

VS 45 series, 2 x 3/2, 5/2 or 5/3 Valve islands VS 5 series, x /, 5/ or 5/ > > x/, 5/ and 5/ valves Size 5 mm > > V d.c. Multipole > > Integrated Fieldbus > > Field expandable with single add-on stations > > Dual spool technology - VS5G Glandless spool

More information

V44/V45 series, 2 x 3/2, 5/2 & 5/3 Mini ISO Valves

V44/V45 series, 2 x 3/2, 5/2 & 5/3 Mini ISO Valves V/V series, x /, / & / > > x/, / and / valves, ISO 07-/ VDMA 6, Size 6 mm > > Solenoid and pilot actuated > > High performance, compact design > > Flexible sub-base system > > Multipressure system capability

More information

Valve Islands, V22 Series Sub-base Mounted 2 x 3/2, 5/2 and 5/3 Valves Solenoid Actuated with Wireway

Valve Islands, V22 Series Sub-base Mounted 2 x 3/2, 5/2 and 5/3 Valves Solenoid Actuated with Wireway Wireway design for easy installation Valve Islands, V22 Series Sub-base Mounted 2 x 3/2, 5/2 and 5/3 Valves Solenoid Actuated with Wireway NEMA 1, and NEMA 5-pin D sub-connector models NEMA 4 Conduit entry

More information

VM15 series, 2 x 3/2, 5/2 or 5/3 Valve islands

VM15 series, 2 x 3/2, 5/2 or 5/3 Valve islands > > Valve slices 2 x 3/2, /2 and /3 with integral push-in fittings Ø 6, 8 and 0 mm > > Multipole or individually wired for installation flexibility > > Quick disconnect base (Pneumapole) > > To configure

More information

VALVES. V40/V41 Mini ISO Star Valves 2x3/2, 5/2 and 5/3, Solenoid and Pilot Actuated ISO / VDMA Size 18 mm

VALVES. V40/V41 Mini ISO Star Valves 2x3/2, 5/2 and 5/3, Solenoid and Pilot Actuated ISO / VDMA Size 18 mm V40/V4 Mini ISO Star Valves x/, / and /, Solenoid and Actuated ISO 407- / VDMA 4 6 Size 8 mm Compact design and high performance Flexible Sub-base system True multipressure system Sandwich regulators and

More information

AUTO STAR with central connector M12x1

AUTO STAR with central connector M12x1 with central connector M2x Non corrosive spool and sleeve for long trouble free life 5/2 and Glandless Valves Actuated Sub-base Mounted ISO 5599- #, #2, #3 6 bar (4,5 W) and 0 bar (2 W) 24V DC solenoids

More information

HERION. MINI ISO VALVES Size 18 mm, V40 / V41 SERIES Size 26 mm, V44 / V45 SERIES. Flexible subbase system with a wide range of accessories

HERION. MINI ISO VALVES Size 18 mm, V40 / V41 SERIES Size 26 mm, V44 / V45 SERIES. Flexible subbase system with a wide range of accessories MINI ISO VALVES Size 18 mm, V40 / V41 SERIES Size 26 mm, V44 / V45 SERIES HERION ISO 15407-1 / VDMA 24563 Brochure N-288 Compact design and high performance The right spool technology for critical pneumatic

More information

VAL-138. Valves. Electrical Details for Solenoid Pilot. Operating Pressure

VAL-138. Valves. Electrical Details for Solenoid Pilot. Operating Pressure Valves 2x3/2, 5/2 and 5/3, Solenoid and Pilot ctuated ISO 5407- / VDM 24 563 Size 26 mm Compact design and high performance Flexible Sub-base system True multipressure system (including vacuum) Sandwich

More information

Prices may be subject to changes after publication.

Prices may be subject to changes after publication. NORGREN ESSENTIALS PRICE LIST 2008 2007 NORGREN ESSENTIALS Norgren essentials product range highlights Norgren s view of most commonly used products for various motion and flow control applications.please

More information

VALVES. V44/V45 Mini ISO Star Valves 2x3/2, 5/2 and 5/3, Solenoid and Pilot Actuated ISO / VDMA Size 26 mm

VALVES. V44/V45 Mini ISO Star Valves 2x3/2, 5/2 and 5/3, Solenoid and Pilot Actuated ISO / VDMA Size 26 mm V44/V4 Mini ISO Star Valves x/, / and /, Solenoid and ctuated ISO 407- / VDM 4 6 Size 6 mm Compact design and high performance Flexible Sub-base system True multipressure system (including vacuum) Sandwich

More information

Conductor: Fine-wire strand consisting of bare copper wires (following DIN EN 60228). Mechanically high-quality TPE mixture. (see colour code table)

Conductor: Fine-wire strand consisting of bare copper wires (following DIN EN 60228). Mechanically high-quality TPE mixture. (see colour code table) Outer jacket: Pressure extruded PVC mixture Inner jacket: Pressure extruded, gusset filling PVC mixture Conductor: Fine-wire strand consisting of bare copper wires 6 1 Core insulation: Mechanically highquality

More information

Assembly kits (501 Series/502 Series/503 Series) 25 Pin Sub-D Connector Kit

Assembly kits (501 Series/502 Series/503 Series) 25 Pin Sub-D Connector Kit 50, 502 and 50 series ssembly kits (50 Series//) 25 Pin Sub- onnector Kit Ø5.5 25 Pin Sub- onnector Kit P5994284400 P59942844002 25 PIN SU- SSMLY WITHOUT IN RIL 25 PIN SU- SSMLY WITH IN RIL G N2522U02MS

More information

Conductor: Fine-wire strand consisting of bare copper wires (following DIN EN 60228). Mechanically high-quality TPE mixture. (see colour code table)

Conductor: Fine-wire strand consisting of bare copper wires (following DIN EN 60228). Mechanically high-quality TPE mixture. (see colour code table) Outer jacket: Pressure extruded, gusset filling PVC mixture 12 cores or more: Bundles with optimized pitch length and pitch direction Conductor: Fine-wire strand consisting of bare copper wires Core insulation:

More information

Nugget 40, V08 series

Nugget 40, V08 series Nugget 0, V0 series Integrally ported 5/ and 5/3 Spool valves Solenoid actuated and pilot operated Ø, Ø mm or High flow from mm body width Wide range of voltages available Low profile fixed length manifolds

More information

Modular pneumatic valve unit

Modular pneumatic valve unit Modular pneumatic valve unit Compact design Modular configuration High flexibility Type 8640 can be combined with Simple exchange of valves (with option P-shut-off - also possible during operation) Type

More information

ATEX Series 502 Valve. Islands Series 502, ATEX Group II, Zone 2 and 22, Category 3 GD. Features Specifications...

ATEX Series 502 Valve. Islands Series 502, ATEX Group II, Zone 2 and 22, Category 3 GD. Features Specifications... Contents ATEX Series 502 Valve Islands Series 502, ATEX Group II, Zone 2 and 22, Category 3 GD Features... 168..170 Specifications... 171-172 How to Order - Assembly Kit... 173 How to Order - Subbases

More information

02/97 N/** Our policy is one of continued research and development. We therefore reserve the right to amend,

02/97 N/** Our policy is one of continued research and development. We therefore reserve the right to amend, Nugget 0 V0 Series Integrally Ported 5/2 and 5/3 Spool Valves Solenoid Actuated and Pilot Operated Ø, Ø mm or High flow from mm body width Low power solenoids with a range of voltages Use valves singly

More information

5/2 and 5/3 Valves Solenoid and Pilot Actuated Sub-base Mounted ISO #1, #2, #3, #4 Steel reinforced main seals

5/2 and 5/3 Valves Solenoid and Pilot Actuated Sub-base Mounted ISO #1, #2, #3, #4 Steel reinforced main seals 5/2 and 5/3 Valves Solenoid and Pilot Actuated Sub-base Mounted ISO 5599- #, #2, #3, #4 Steel reinforced main seals 6 bar and 0 bar CNOMO solenoid pilots with locking or non-locking manual override Low

More information

CFRIP - tear strip for faster stripping

CFRIP - tear strip for faster stripping Outer jacket: Pressure extruded, gusset filling, flame-retardant TPE mixture 12 cores or more: Bundles with optimized pitch length and pitch direction Conductor: Fine-wire strand in especially bendingstable

More information

Modular pneumatic valve island

Modular pneumatic valve island Modular pneumatic valve island Compact design Modular configuration High flexibility Simple exchange of valves (with P shut off, also possible during operation an option) Type 8640 can be combined with

More information

Series 77 & 78. Compact & Modular Valves. solutions. Series 77 - Compact Valves. Series 77 - Sub-D. Series 77 - Fieldbus

Series 77 & 78. Compact & Modular Valves. solutions. Series 77 - Compact Valves. Series 77 - Sub-D. Series 77 - Fieldbus PNEUMATIC valves Series 77 & 78 Compact & Modular Valves Series 77 - Compact Valves Series 77 - LPP770 Series 77 - Sub-D Series 77 - Fieldbus Series 77 - LPP772 Series 77 - Coils & Plug-in sockets Series

More information

Valve Islands VM15 Series

Valve Islands VM15 Series Valve Islands VM5 Series Multipole or individually wired for installation flexibility Interchangeable Fieldbus compatible modules Compact and lightweight Quick disconnect base (Pneumapole) High flow from

More information

97300 NAMUR 3/2 & 5/2 way spool valves electromagnetic actuated, indirectly controlled G 1/4, 1/4 NPT, NAMUR Interface

97300 NAMUR 3/2 & 5/2 way spool valves electromagnetic actuated, indirectly controlled G 1/4, 1/4 NPT, NAMUR Interface 9700 NAMUR / & / way spool valves electromagnetic actuated, indirectly controlled G /, / NPT, NAMUR Interface For single and double acting actuators / or / way function in one valve Easily interchangeable

More information

Valve Manifolds. Series Fielbus Electronics - 51

Valve Manifolds. Series Fielbus Electronics - 51 Valve Manifolds 07GB-07/R0 Series 0 Fielbus Electronics - 0 Series General Information 0 Valve Series belong to the Numatics Valve Generation 000. With up to outputs and 96 inputs., depending on the protocols

More information

Nugget 40 Series Valves 5 port/2-position, compressed air, directional control, thin-lip spool valve with plug-in wireway

Nugget 40 Series Valves 5 port/2-position, compressed air, directional control, thin-lip spool valve with plug-in wireway Section 8 Nugget 0 Series Valves 5 port/2-position, compressed air, directional control, thin-lip spool valve with plug-in wireway Contents Features and Benefits...VAL-8-2 Technical Data...VAL-8- Inline

More information

Min. bending radius for fixed installation 7,5 x d 6,8 x d 4,0 x d 6,8 x d Torsion (at 1 m cable length) --- ±45 ±90 ±45

Min. bending radius for fixed installation 7,5 x d 6,8 x d 4,0 x d 6,8 x d Torsion (at 1 m cable length) --- ±45 ±90 ±45 Outer jacket: Pressure extruded, gusset filling, oil-resistant PVC mixture 12 cores or more: Bundles with optimized pitch length and pitch direction Conductor: Fine-wire strand consisting of bare copper

More information

Series RE-46. Valve terminals > Technical details. Order code RE-46/**-*-***-*** Temperature range Medium -10 C C

Series RE-46. Valve terminals > Technical details. Order code RE-46/**-*-***-*** Temperature range Medium -10 C C Technical details Temperature range Medium -0 C... +50 C Filtered, oil-free and dried compressed air according to ISO 857-:00, Class 7::, instrument air, free of aggressive additives. Alternatively the

More information

2005 / 2012 / 2035 Series

2005 / 2012 / 2035 Series 005 / 0 / 035 Series Accessories Sandwich Pressure Regulators Accessory Description 0. to bar - 005 Regulator repair kit 0.3 to bar - 0.7 to 9 bar -3 0. to bar 39-909 0 Regulator repair kit 0.3 to bar

More information

N/** поставка оборудования для подготовки воздуха

N/** поставка оборудования для подготовки воздуха M/0000 Series Inline /, 5/ and 5/ Spool Valves Solenoid and Pilot Actuated G / Low power solenoids High flow Unique steel reinforced seals Light weight corrosion resistant materials Technical Data Medium:

More information

Super X Inline 3/2 and 5/2 Spool valves, solenoid and pilot actuated

Super X Inline 3/2 and 5/2 Spool valves, solenoid and pilot actuated > > Port size: G/8 & G/4 > > Low and high power solenoid coil options > > End, side or face mounting solenoids > > Light weight corrosion resistant materials > > Option for manual override acting directly

More information

Series 581 ISO Pneumatic Directional Control Valves

Series 581 ISO Pneumatic Directional Control Valves Series 581 ISO 5599-1 Pneumatic Directional Control Valves Series 581 Pneumatic Valves 01_1 st Headline_36 pt/14.4 mm 4-Way ISO Directional Control second line Series 581 - A complete series of standardized

More information

Valve Manifolds Series

Valve Manifolds Series Valve Manifolds 00 Series General Information Valve 00 series belongs to the new Numatics Valve Generation 000. It fulfills all requirements of automation. Characteristics: - Modular reality, true plug

More information

Individual, Multipole and Fieldbus

Individual, Multipole and Fieldbus Valve Islands > 016 > Series Y valve islands Series Y valve islands, Individual, Multipole and Fieldbus Valve Island with integrated Pneumatics and Electronics. Available versions: Individual, Multipole,

More information

Remote Process Actuation Control System AirLINE WAGO Remote I/Os and Fieldbusses

Remote Process Actuation Control System AirLINE WAGO Remote I/Os and Fieldbusses Remote Process Actuation Control System AirLINE WAGO Remote I/Os and Fieldbusses Type 8644 can be combined with... Fully compatible with WAGO I/O Combination of Fieldbus, pilot valves and I/O modules High

More information

NICHIGOH S CABLE CONTENTS ROBOT CABLE CONTROL CABLE RO-FLEX RO-FLEX RCVV-S 9 VCT-F 11 VCTF 13 MVVS 15 DATA TRANSMISSION CABLE NFKVV-SB 18

NICHIGOH S CABLE CONTENTS ROBOT CABLE CONTROL CABLE RO-FLEX RO-FLEX RCVV-S 9 VCT-F 11 VCTF 13 MVVS 15 DATA TRANSMISSION CABLE NFKVV-SB 18 0 NICHIGOH S CABLE CONTENTS ROBOT CABLE RO-FLEX3000 2 RO-FLEX3300 5 RCVV-S 9 CONTROL CABLE VCT-F 11 VCTF 13 MVVS 15 DATA TRANSMISSION CABLE NFKVV-SB 18 1 WORLD WIDE STANDARD CABLE RECOGNITION SERIES RO-FLEX3000F

More information

26230, NAMUR 3/2 & 5/2 Indirect solenoid actuated spool valves

26230, NAMUR 3/2 & 5/2 Indirect solenoid actuated spool valves 60, 8007 NAMUR / & / > > Port size: G/ and NAMUR interface > > Easily interchangeable solenoid system > > For single and double operated actuators > > Standard manual override with detent > > Maintenance-free

More information

503 series. GENERAL Operating pressure

503 series. GENERAL Operating pressure FEATURES rate up to 00 l/min Spool & Sleeve or rubber packed technology in the same dimension body Wide electrical connection selection : G3 or 580 Fieldbus Electronics, 25 or 37 Pin Sub-D connector, 19

More information

Section 6. Four Station Nugget 30 High Flow Micro Valve with 25-pin D connector and Pneufit Fittings

Section 6. Four Station Nugget 30 High Flow Micro Valve with 25-pin D connector and Pneufit Fittings Section 6 Nugget 30 Series Valves 5/2 and 5/3-position, high flow, compressed air micro valve with compact, lightweight 10mm body, and interchangeable fittings for 1/8", 5/32", 1/4", 4 or 6 mm tubing.

More information

Remote Process Actuation Control System AirLINE - Rockwell 1734 Point I/O System

Remote Process Actuation Control System AirLINE - Rockwell 1734 Point I/O System Remote Process Actuation Control System AirLINE - Rockwell 1734 Type 8644 can be combined with... Fully compatible with Rockwell 1734 Point I/O System Combination of Fieldbus, pilot valves and I/O modules

More information

SCOTT DRIVE 100. Features. Features

SCOTT DRIVE 100. Features. Features Features Features + Suitable for use with Permanent magnet (BLDC) or AC Induction motors + 100 kw Output Power (150kW Peak) + Firmware upgradeable via Ethernet port + Integrated Pre-charge Circuit + Integrated

More information

97100 Inline 3/2, 5/2 & 5/3 spool valves electromagnetic actuated, indirectly controlled G 1/4, 1/4 NPT

97100 Inline 3/2, 5/2 & 5/3 spool valves electromagnetic actuated, indirectly controlled G 1/4, 1/4 NPT 97 Inline /, 5/ & 5/ spool valves electromagnetic actuated, indirectly controlled G /, / NPT For single and double operated actuators Crossover-free switching, switch-over function guaranteed even with

More information

Section 9. Four Station Nugget 120 Valve Stack with Conduit Connector. Manual Override.75" (19 mm) Wide Body. Smooth-Line Solenoid Pilot

Section 9. Four Station Nugget 120 Valve Stack with Conduit Connector. Manual Override.75 (19 mm) Wide Body. Smooth-Line Solenoid Pilot Section 9 Nugget 120 Series Valves Compressed air, directional control valves with diagnostic plug-in wireway Contents Nugget 120 Features and Benefits...VAL-9-2 Nugget 120 Specifications...VAL-9-4 V14

More information

AUSTRALIAN PART NUMBERS for SOLENOID VALVES IN AUSTRALIA WE SEPARATELY STOCK VALVES, SOLENOID COILS, AND CONNECTOR PLUGS ETC.

AUSTRALIAN PART NUMBERS for SOLENOID VALVES IN AUSTRALIA WE SEPARATELY STOCK VALVES, SOLENOID COILS, AND CONNECTOR PLUGS ETC. AUSTRALIAN PART NUMBERS for SOLEID VALVES IN AUSTRALIA WE SEPARATELY STOCK VALVES, SOLEID COILS, AND CONNECTOR PLUGS ETC. THIS DOCUMENT CONTAINS THE MOST POPULAR VALVE SERIES AND THE RELATED PART NUMBERS.

More information

Solenoid Valve Island Type 3965

Solenoid Valve Island Type 3965 Solenoid Valve Island Type 365 for the control of pneumatic actuators General The Type 365 Solenoid Valve Island is a compact solution for the centralized control of pneumatic actuators in chemical and

More information

A K 3 E D G

A K 3 E D G 005 Series. How to Order - G3 or Multipol Assembly Kit A K 3 E D 0 0 0 0 3 G A36 Electronic / Electrical Systems Type & Location 3 = T = Terminal Strip - 3 J = 5 pin SUB-D connector M = 37 pin SUB-D connector

More information

T 3965 EN Type 3965 Solenoid Valve Island To control pneumatic actuators

T 3965 EN Type 3965 Solenoid Valve Island To control pneumatic actuators T 365 EN Type 365 Solenoid Valve Island To control pneumatic actuators Application The Type 365 Solenoid Valve Island is a compact solution for the central control of pneumatic actuators in chemical and

More information

Modular electrical and pneumatic automation system

Modular electrical and pneumatic automation system Modular electrical and pneumatic automation system Decentralised automatisation without control cabinet in protection type IP65 / IP67 Modular structure, also as central station with several decentralised

More information

MACH 16 VALVES DISTRIBUTORS

MACH 16 VALVES DISTRIBUTORS MACH 16 VALVES Available in size 1/8 only, versions 5/2 and 5/3 and with pneumatic and solenoid actuation. The mach 16 valve is a typical small size valve, only 16 mm wide, with excellent performance 750

More information

V03, V04, V05 (EXCEL 32) 2/2 & 3/2 Direct solenoid actuated poppet valves

V03, V04, V05 (EXCEL 32) 2/2 & 3/2 Direct solenoid actuated poppet valves V0, V0, V05 (EXCEL ) / & / > > Port size: G/8, G/ > > Extensive range of power and orifice size options > > Choice of manual override > > Compact installation > > Removeable coil > > Standard exhaust diffuser

More information

AirLINE and AirLINE Quick electrical/pneumatic Automation System

AirLINE and AirLINE Quick electrical/pneumatic Automation System AirLINE and AirLINE Quick electrical/pneumatic Automation System Type 8644 can be combined with Fully compatible with Rockwell Combination of Fieldbus, pilot valves and I/O modules higher fl exibility

More information

Valve Manifolds Type 44 VTSA, Type 45 VTSA-F Metric Series Overview

Valve Manifolds Type 44 VTSA, Type 45 VTSA-F Metric Series Overview Overview Modular multi-functional valve manifold for up to 3 valves: Type 44 VTSA, ISO 15407-/ISO 5599- Type 45 VTSA-F with optimized flow Different valve sizes on one valve manifold: 18 mm (ISO 0) 6 mm

More information

Valve Manifolds Type 44 VTSA, Type 45 VTSA-F Inch Series Overview

Valve Manifolds Type 44 VTSA, Type 45 VTSA-F Inch Series Overview Overview Modular multi-functional valve manifold for up to 3 valves: Type 44 VTSA, ISO 15407-/ISO 5599- Type 45 VTSA-F with optimized flow Different valve sizes on one valve manifold: 0.71 in (ISO 0) 1.0

More information

Multi Way Valves for Pneumatics Servo Assisted, Extendable, 10mm Wide

Multi Way Valves for Pneumatics Servo Assisted, Extendable, 10mm Wide Multi Way Valves for Pneumatics Servo Assisted, Extendable, 10mm Wide 3/2 and 5/2 Way Valves Optimum system solutions due to high level of modularity Maintenance free and little wear due to high level

More information

2oo2 with bypass valve exhaust guards and indicators. 2oo2 I4. N/en

2oo2 with bypass valve exhaust guards and indicators. 2oo2 I4. N/en V8 series Redundant valve manifold systems - Modular with bypass oo Safety, oo Availability and oo Safety and Availability Modular design - Maxseal valves ypass function enables valve removal online Stainless

More information

FIELDBUS ELECTRONICS 580 Electronics (Series : M7 to 1/2 (G or NPT) or with push-in fittings Ø4 to 10 mm)

FIELDBUS ELECTRONICS 580 Electronics (Series : M7 to 1/2 (G or NPT) or with push-in fittings Ø4 to 10 mm) FIELDBUS ELECTRONICS 580 Electronics (Series - : M7 to 1/2 (G or NPT) or with push-in fittings Ø4 to 10 mm) 580 Fieldbus - Electronics Made Easy! Innovative Graphic Display is used for easy commissioning,

More information

DISTRIBUTORS. n o p q. hdm + multi-pole connection TECHNICAL DATA COMPONENTS

DISTRIBUTORS. n o p q. hdm + multi-pole connection TECHNICAL DATA COMPONENTS + multi-pole connection HDMs are the ideal solution for those requiring the unbeatable performance, flexibility and modularity of Multimach valves combined with sturdy mechanics and a high degree of protection

More information

Common wiring modules can be connected by fieldbus, multi-pole or common earth/neutral modules.

Common wiring modules can be connected by fieldbus, multi-pole or common earth/neutral modules. / and 4/ multi-way valves; servo assisted; DN 4; flow rate: l/min.; /8, legris ø 6 mm port connections Advantages / Benefits Optimised system solutions due to high level of modularity Compact design with

More information

Pneumatic valves VUWS/valve manifold VTUS

Pneumatic valves VUWS/valve manifold VTUS Pneumatic valves VUWS/valve manifold VTUS -V- New VUWS-LT25, VTUS-25 Pneumatic valves VUWS/valve manifold VTUS Key features Innovative Versatile Reliable Easy to install A reliable, heavy-duty valve with

More information

VP23, 3-way proportional pressure control valves Seat valve with μp-driven pressure control

VP23, 3-way proportional pressure control valves Seat valve with μp-driven pressure control VP, -way proportional pressure control valves > > Port size: G/... G/ > > All-digital control electronics > > Variable pressure control > > Optional: serial interface with VP-Tool Software > > Optional

More information

Series CD26-PL Plug-in Pneumatic Directional Control Valves

Series CD26-PL Plug-in Pneumatic Directional Control Valves Series CD26-PL Plug-in Pneumatic Directional Control Valves Series CD26-PL Valves Pneumatic Plug-in Directional Control valve to ISO 15407-2 Series CD26-PL valve offers plug-in manifolds or single valves

More information

Electrically operated valves Series BM-01, 3/2-way and 2 x 3/2-way G1/8 550 to 660 Nl/min (0.559 to Cv)

Electrically operated valves Series BM-01, 3/2-way and 2 x 3/2-way G1/8 550 to 660 Nl/min (0.559 to Cv) Electrically operated valves Series BM-01, 3/2-way and 2 x 3/2-way G1/8 550 to 660 Nl/min (0.559 to 0.671 Cv) Order code BM-01-310-HNR-462 Series and function BM = Standard Manual override HNT = non-detented

More information

Modular pneumatic valve unit

Modular pneumatic valve unit Modular pneumatic valve unit Compact design Modular configuration High flexibility Simple exchange of valves (with option P-shut-off - also possible during operation) Type 8640 can be combined with Type

More information

Valve Islands Series H

Valve Islands Series H CATALOGUE > Release 8. Valve Islands Series H Valve Island with Pneumatics and Electronics integrated. Available versions: Multipole (PNP and NPN) and Fieldbus (Profibus-DP, DeviceNet, CANopen). Valve

More information

Sub-Base Mounted Valves to ISO 5599/2 Fielbus Electronics - 239

Sub-Base Mounted Valves to ISO 5599/2 Fielbus Electronics - 239 Valves Sub-Base Mounted Valves to ISO 5599/2 Fielbus Electronics - 239 General Information ISO 1, ISO 2 and ISO 3 valve series incorporate the famous Numatics lapped spool and sleeve for ultimate service

More information

Valve terminals MPA-F

Valve terminals MPA-F Key features Innovative Versatile Reliable Easy to mount Manifold blocks, tubing connections and exhausts designed for optimum flow rates Tubing diameters: Working ports up to 10 mm Supply ports up to

More information

15 mm Pilot Valve. More technical specifications are reported in the following pages. 1

15 mm Pilot Valve. More technical specifications are reported in the following pages. 1 15 mm Pilot Valve The 15 mm pilot valve has been designed and developped by Amisco as a logical evolution of the traditional product range manufactured for the pneumatic market. The 15 mm solenoid valve

More information

Electro-Pneumatic Devices Valves and Positioners. The Drive & Control Company

Electro-Pneumatic Devices Valves and Positioners. The Drive & Control Company Electro-Pneumatic Devices Valves and Positioners The Drive & Control Company Electro-Pneumatic Devices Dynamic precision from Rexroth Why choose Rexroth E/P s? Rexroth electro-pneumatic pressure control

More information

CPLab / CP Factory. Application module magazine. Data sheets

CPLab / CP Factory. Application module magazine. Data sheets CPLab / CP Factory Application module magazine Data sheets Data sheet: Push-in fitting QSM-M5-4 #153304 Size Mini Nominal size 2.2 mm Type of seal on screw-in stud Sealing ring Container size 10 Design

More information

Remote Process Actuation Control System AirLINE - Siemens ET 200S

Remote Process Actuation Control System AirLINE - Siemens ET 200S Remote Process Actuation Control System AirLINE - Siemens ET 200S Type 8644 can be combined with... Fully compatible with Siemens ET 200S Combination of Fieldbus, pilot valves and I/O modules High flexibility

More information

Series RE-10. Valve terminals > Technical details. Order code RE-10/**-***-*** Temperature range Medium +5 C C

Series RE-10. Valve terminals > Technical details. Order code RE-10/**-***-*** Temperature range Medium +5 C C Technical details Temperature range Medium + C... +0 C Filtered, oil-free and dried compressed air according to ISO 8-:00, Class ::, instrument air, free of aggressive additives. Alternatively the pressure

More information

Pilot Operated Directional Control Valves Series D31DW, D31NW, D*1VW

Pilot Operated Directional Control Valves Series D31DW, D31NW, D*1VW Characteristics The pilot operated valves are available in 4 sizes: D31DW NG10 (standard) D31NW NG10 (high flow) D41VW NG16 D81VW NG5 (for port diameter up to 6 mm) D91VW NG5 (for port diameter up to 3

More information

SBM TECHNOLOGY PET Blow Valve Block

SBM TECHNOLOGY PET Blow Valve Block Advanced high pressure seal technology Robust, compact & lightweight design Proven & reliable technology Maintenance & service friendly High flow rate exhaust function Minimal dead space volume (< 35ml)

More information

5/2-5/3 VALVES (1/8" + SUBBASE) Series G

5/2-5/3 VALVES (1/8 + SUBBASE) Series G /-/ VLVES (/" SUBBSE) Series G G 0 mm - G / Valves and solenoid valves - G/ threaded valve body with traditional Univer spool system - Version with integrated connection and esternal connection - Compact

More information

Pneumatic valves VUWS/valve manifold VTUS

Pneumatic valves VUWS/valve manifold VTUS Pneumatic valves VUWS/valve manifold VTUS -V- New VUWS-LT25, VTUS-25 Pneumatic valves VUWS/valve manifold VTUS Key features Innovative Versatile Reliable Easy to install A reliable, heavy-duty valve with

More information

3/2-way Small Solenoid Valve, G 1/8 - G 1/4 and sub-base

3/2-way Small Solenoid Valve, G 1/8 - G 1/4 and sub-base 3/2-way Small Solenoid Valve, G 1/8 - G 1/4 and sub-base Sub-base Direct-acting, normally closed and normally open Brass and stainless steel body Electrical cable plug Form A With or without manual override

More information

Versions. Version with K VS Version with K VS 2.0. Fig. 1: Type 3967 Solenoid Valve

Versions. Version with K VS Version with K VS 2.0. Fig. 1: Type 3967 Solenoid Valve Type 367 Solenoid Valve Application Solenoid valve for controlling pneumatic linear actuators with NAMUR rib according to IEC 60534 or pneumatic rotary actuators with NAMUR interface according to VDI/VDE

More information

P64F - Olympian Plus plug-in system Soft start/dump valves

P64F - Olympian Plus plug-in system Soft start/dump valves > Port size: /4... /4 (ISO G/PTF) > Solenoid, air pilot or manual operator > ssists machine designers in complying with the European Machineries Directive > High forward flow and capacity dump facility

More information

APS & APIS ATEX AIRPOWER SWITCH BOXES FEATURES DESCRIPTION

APS & APIS ATEX AIRPOWER SWITCH BOXES FEATURES DESCRIPTION page 1 DESCRIPTION The switch boxes are suitable for rotary actuators and are the industry leader in versatility, quality and approvals gained. Models include APS standard range with a variety of outputs

More information

Solenoid valves VUVS/valve manifold VTUS, NPT

Solenoid valves VUVS/valve manifold VTUS, NPT Solenoid valves VUVS/valve manifold VTUS, NPT -V- New VUVS-LT25, VTUS-25 Solenoid valves VUVS/valve manifold VTUS, NPT Key features Innovative Versatile Reliable Easy to install A reliable, heavy-duty

More information

Multipole and Fieldbus

Multipole and Fieldbus CATALOGUE > Release 8.8 > Series HN valve islands Series HN valve islands, Multipole and Fieldbus New versions Multipole connection with 5 or 37 pins Serial connection with the most common communication

More information

MULTIPLE CONNECTORS MACH 16

MULTIPLE CONNECTORS MACH 16 Mach 16 valves can be mounted on bases with pneumatic or electrical connection. The electric contacts of the individual valves are connected by means of a printed circuit board in a sealed conduit to a

More information

COILS, CONNECTORS, SOLENOID VALVES

COILS, CONNECTORS, SOLENOID VALVES COILS, CONNECTORS, SOLENOID VALVES 117 10 mm solenoids Solenoid valve 10 mm 00.441.0 Tension 24V DC ±10% Temperature range -5 C...+60 C (23 F... 140 F) Power 0.5... 1 W Operating pressure 0... 7 bar (0...

More information

Direct-acting 3/2 way plunger valve

Direct-acting 3/2 way plunger valve Direct-acting 3/2 way plunger valve Direct-acting, compact valve with diameter of up to DN 2.5 Vibration-proof, bolted coil system Banjo threaded connection for direct mounting on pneumatic valves Type

More information

10 mm solenoid valves on manifold with multiconnection D-SUB

10 mm solenoid valves on manifold with multiconnection D-SUB 0 mm solenoid valves on manifold with multiconnection D-SUB Air inlet from both sides Exits with ø4 push-in fittings ø4 Panel mounting possible with two M3 screws on the top side 3/2 solenoid valves Electrical

More information

Flow. group *2) G1/4 1, , B G1/ , B /4 NPT , B N/en

Flow. group *2) G1/4 1, , B G1/ , B /4 NPT , B N/en / poppet valves electromagnetic actuated, directly controlled G /4, G / or /4 NPT Working from 0 bar up Short switching times Suited for fine vacuum down to,33 0 - mbar For a.c. solenoid systems with integrated

More information

ICO2S - 2/2, 3/2 or 5/2 Exia poppet valves Electromagnetically actuated, solenoid pilot operated

ICO2S - 2/2, 3/2 or 5/2 Exia poppet valves Electromagnetically actuated, solenoid pilot operated ICOS - /, / or 5/ Exia poppet valves > > Port size: /... / (ISO G/NPT) /... (Flanged) > > Zone 0, Exia solenoid pilot operated valve > > Safety integrity level and > > Reliable and long life, ideal for

More information

Valve terminals CPV-SC, Smart Cubic

Valve terminals CPV-SC, Smart Cubic Key features Innovative Versatile Reliable Easy to mount Small, compact valve terminal for a wide range of pneumatic applications Enormous flexibility during planning, assembly and operational use Multi-pin

More information

V82 series - Redundant valve manifold systems - Compact 1oo2 Safety, 2oo2 Availability and 2oo3 Safety and Availability

V82 series - Redundant valve manifold systems - Compact 1oo2 Safety, 2oo2 Availability and 2oo3 Safety and Availability V8 series - Redundant valve manifold systems - Compact oo Safety, oo Availability and oo Safety and Availability > > Compact design - Herion valves > > Exhaust guards as standard > > SIL certified components

More information

CABINET MOUNTING. 501 series. Aluminium or stainless steel AISI 316L

CABINET MOUNTING. 501 series. Aluminium or stainless steel AISI 316L CABINET MOUNTING 501 series FEATURES The 501 range has an adaptation plate for direct mounting on a cabinet side or bottom walls. These adaptation plates are available in aluminium or stainless steel AISI

More information

Control block VOFA with safety function

Control block VOFA with safety function Key features Innovative Versatile Reliable Easy to assemble Can be used for safe reversing of a hazardous movement (5/2-way solenoid valve) Can be used for safe venting (3/2-way solenoid valve function,

More information

Solenoid/pneumatic valves, ISO

Solenoid/pneumatic valves, ISO Solenoid/pneumatic valves, ISO 15407-1 q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement

More information

Solenoid valves VMPA

Solenoid valves VMPA Key features Innovative Versatile Reliable Easy to mount Slim high-performance valves in a sturdy metal housing MPA1 (width 10 mm): flow rate up to 360 l/min MPA14 (width 14 mm): flow rate up to 670 l/min

More information

SBM TECHNOLOGY Cooling / Air Recovery Valve

SBM TECHNOLOGY Cooling / Air Recovery Valve SBM TECHNOLOGY Cooling / Air Recovery Valve Part no. VSP15203x Advanced high pressure seal technology Integrated non-return valve Robust, compact & lightweight design Proven & reliable technology Maintenance

More information