SLIDING DOOR: INSTALLATION INSTRUCTION SLIDING DOOR BRAKE S34 / S42 / S26

Size: px

Start display at page:

Download "SLIDING DOOR: INSTALLATION INSTRUCTION SLIDING DOOR BRAKE S34 / S42 / S26"

Britton Ross
5 years ago
Views:

1 SLIDING DOOR: INSTALLATION INSTRUCTION SLIDING DOOR BRAKE S34 / S42 / S26 Version 7.2 ( ) b c Installation Subject to technical changes. easy medium difficult

2 CONTENT AND TOOLS CONTENT: Tools page 02 Product information page 03 Accessories page 05 Cutting dimensions page 06 Installation instruction page 07 Function test / possible sources of error page 12 TOOLS: (without claim of completeness) n cross tip screwdriver n Allen key 2 mm n Metal cutting saw n Measuring instruments n Pencil VERSION INFORMATION: Version 7.0: New generation of the sliding door brake 7.2: S1200 and table for cutting the Positioning added 2

3 PRODUCT INFORMATION GENERAL INFORMATION: Preparation n This manual is part of the product and describes the safe and proper installation of the system. Please read the instruction carefully before installation. n For the installation of the sliding door brake on an already mounted sliding door please follow the job steps described in the installation instruction. n Please note that the assembly should only be done by qualified and trained staff in strict compliance with all details indicated in this document. Improper installation in variation from manufacturer s specification may cause defects and danger, thus endangering the safe fixing of the product as well as the safety of the prospective user. The liability of the manufacturer shall be excluded in case of defects and consequential damages resulting from incorrect assembly of this product. n Variations in system height at construction, by climate-related movements of ground and / or ceiling may require a readjustment of the sliding door brake pins and the lower rollers. n Please check the completeness of the delivered parts and check carefully if any transport damages are visible. n If any parts are damaged or lost, please immediately contact the responsible supplier. n It is assumed that you have exactly identified all cutting dimensions according to the measurement instruction for raumplus products. SYMBOLS: Symbol Importance Symbol Importance Risk or danger No cordless screwdriver Advice and information Additional information / other documents Directional data / direction of movement yes and right no and wrong Follow the order SYSTEM: Sliding door brake n Minimum width of the horizontal profile 750 mm / 2 sliding door brakes 3

4 PRODUCT INFORMATION GENERAL INFORMATION: Product safety n The door system complies with the prior art and the authorized safety rules at the time of delivery. USE: Intended use n The prerequisite for the intended use of our products is the professional installation according to our installation instruction. The fittings must be sufficiently and durably attached to all relevant places. The function of the fitting must not be hindered or altered during installation. n Special solutions are only possible in consultation with raumplus. Use not as intended n Risk or danger may occur in the following cases: - the door system has improperly been installed or maintained - the safety and installation instructions have not been followed. - after improper installation or inadequate fixing ( e.g. to parts of buildings) - the maximum weight of the doors has been exceeded. - improper shock and case loads or other additional loads on the fittings have occured - the fittings have been used outside. - body parts or objects got in to the closing edges or door runnings during use of the door wing. - the door system is not used as intended. Structural modifications n structural modifications that are not offered as an accessory from raumplus may only be attached or installed with permission of raumplus GmbH! 4

5 ACCESSORIES 1_ x0 2_ _ _ Positionshalter GTB S _ Sliding door brake S 26 / S34 / S42 2_ Positioning for sliding door brake S34 t in kg t in kg Funktionsgrenze t Funktionsgrenze in kg Funktion Optimale Funktion Optimale Funktion Funktionsgrenze Funktion for sliding door kg ( ) for sliding door kg ( ) for sliding door kg ( ) Optimale Funktion 3_ Positioning for sliding door brake S42 4_ Positioning for sliding door brake S26 without illustration: 5_ Bottom track stopper Door weight in kg functional limit function optimal function Sliding door brake up to 30 kg ( ) Sliding door brake kg ( ) Sliding door brake kg ( ) _ Stopper for top track 7_ Stop plate for sliding door brake Office 5

6 CUTTING DIMENSIONS PREPARATION lowest room height (RH) RH 1_ Cutting measure always for the lowest room height. Direction of closing 750 mm 2_ Minimum length of the horizontal profile 750 mm / a second sliding door brake is possible. 6

7 INSTALLATION INSTRUCTION SLIDING DOOR BRAKE Standard size 75 mm* * with the exception of C42 = 130 mm Direction of closing 3_ Positioning of the sliding door brake. Direction of closing For wooden doors, we recommend two chipboard screws pan head 4,5x30. 4_ Installation of the sliding door brake. 7

8 INSTALLATION INSTRUCTION SLIDING DOOR BRAKE Direction of closing Before installing the sliding door, stretch the carrier of the sliding door brake. 5_ Attention! Before installing the sliding door stretch the carrier. Attention: Adjust the door before installing the sliding door brake. If there is no wall stop, it is necessary to use a bottom track stopper. lowest room height (RH) 45 mm / ( 40 mm) = height of the door 6_ Bottom track surface, room height (RH) - 45 mm / bottom track insert, room height (RH) - 40 mm System 26 symm / asym Measure the distance from the upper edge of the door to top track. Determine the length of the base plate according to the table. Shorten the base plate by using the hacksaw. Make a horizontal cut. If necessary, remove the burr. length of the base plate: 8 mm min max length of the base plate: 15 mm distance: 27 to 31 mm distance: 38 to 41 mm distance : base plate : 27 to 31 mm = 8 mm 32 / 33 mm = 9 mm 34 / 35 mm = 11 mm 36 / 37 mm = 13 mm 38 to 41 mm = 15 mm cut-off base plate cap screw for the cap 7_ Cutting dimension for positioning S 26 / 40s top track 8

9 INSTALLATION INSTRUCTION 40S TOP TRACK / SHORTEN BASE PLATE OF THE POSITIONING System 34 symm / asym System 42 S1200 / wooden door length of the baseplate: distance: 27 to 31 mm 8 mm min max length of the baseplate: 10 mm distance: 33 to 37 mm distance : base plate : 27 to 30 mm = 8 mm 31 / 32 mm = 9 mm 33 to 37 mm = 10 mm 8_ System 42 length of the baseplate: 8 mm min max length of the base plate: 15 mm distance: 24 to 28 mm distance 38 to 41 mm cut-off base plate cap screw for the cap distance : base plate : 24 to 28 mm = 8 mm 29 / 32 mm = 9 mm 31 / 32 mm = 11 mm 33 to 37 mm = 13 mm cut-off base plate cap screws for the cap 9_ 9

10 INSTALLATION INSTRUCTIONS SLIDING DOOR BRAKE POSITIONING 250 mm 75 mm only C42 = 130 mm only C42 = 305mm Top cap positioning! 10_ Standard size for sliding door brake installation mm 3x 11_ Place sliding door brake positioning into top track. 12_ Srew the top cap on the sliding door brake positioning. 10

11 INSTALLATION INSTRUCTIONS ACCESSORIES S34 / S _DS-endstopper S _DS-endstopper S _Blende 1L S42 für Endstopper Stop plate for sliding door brake x Stopper for top track xx Stopper for bottom track End cap, single xx Top track (implied) Sliding door brake Positioning for top tracks Optional: Deckenschienenend- stopper for xx top track x mit Blende 1-lfg. with xx end cap, single xx H H with wall stop without wall stop Bottom track Stop plate Anschlagplatte for sliding door für brake GTB x Stopper for bottom track You can use the stop plate only in combination with the stopper for bottom track. 1 track, against each other Stopper for bottom track Stopper for bottom track 1_ Use of stopper for bottom track and top track stopper Gleittürbremse Blatt Gleittürbremse x Blatt Blatt Stand Blatt Stand Stand 09/ x Stand 09/11 Weitergabe sowie Vervielfältigung dieses Dokuments, Verwertung Schutzvermerk Schutzvermerk ISO beachten ISO The safety notice beachten ISO is to be observed The safety notice ISO is to be observed The distribution and copying of this document, as well as the und Mitteilung Weitergabe seines Inhalts sind sowie verboten, Vervielfältigung soweit nicht ausdrücklich gestattet. ISO Zuwiderhandlungen und The Mitteilung safety notice beachten verpflichten seines ISO zu Schadens Inhalts is to be expressively exploitation dieses and Dokuments, anouncement of its Verwertung contents are forbidden, if not The distribution and copying of this document, as well as the Schutzvermerk Schutzvermerk ISO beachten ersatz. Alle Rechte für den Fall der Patent-, Gebrauchsmuster- oder sind observedallowed. verboten, The Breaches soweit safety are subject nicht notice to indemnification. ausdrücklich exploitation dieses gestattet. and Dokuments, anouncement vorbehalten. Zuwiderhandlungen of its Verwertung contents are forbidden, if verpflichten not The distribution zu Schadens and copying expressively of this document, allowed. as Breaches well as theare subject to indemnification. All ISO All exploitation is and to anouncement be observed of its contents are forbidden, if not Weitergabe sowie Vervielfältigung dieses Dokuments, Verwertung The distribution and copying of this document, rights as well reserved as the in case of registration of patent, copyright or design. und Mitteilung Weitergabe seines Inhalts sind sowie verboten, Vervielfältigung soweit nicht ausdrücklich gestattet. Zuwiderhandlungen verpflichten zu Schadens expressively allowed. Breaches are subject to indemnification. All Geschmacksmustereintragung ersatz. Alle Rechte für und den Fall Mitteilung der Patent-, Gebrauchsmuster- seines Inhalts oder ersatz. sind rights reserved Alle verboten, Rechte in case soweit of registration für den nicht of Fall patent, ausdrücklich gestattet. vorbehalten. Zuwiderhandlungen verpflichten Geschmacksmustereintragung zu Schadens expressively vorbehalten. allowed. Breaches are subject to indemnification. All der copyright Patent-, or design. exploitation Gebrauchsmuster- and anouncement oder rights of its reserved contents in are case forbidden, of registration if not of patent, copyright or design. Geschmacksmustereintragung ersatz. Alle Rechte für den Fall der Patent-, Gebrauchsmuster- oder rights reserved in case of registration of patent, copyright or design. Geschmacksmustereintragung vorbehalten. 11

12 FUNCTION TEST 3 x function Funktionstest test 11_ Function test In order to avoid an influence of the closing quality of the sliding door brake, we recommend not to use a dust excluding brush between the stiles. 13_ Dust excluding brush Possible sources of error Error The sliding door does not brake. The sliding door does not brake properly, it`s grinds while closing. The sliding door closes too early or too late. Imprecise overlap of the vertical profiles for systems with more than two sliding doors. Troubleshooting Stretch the carrier of sliding door brake. Make sure that the positioning has the right length. Correct the position of the position holder. Make sure that the bottom stopper is on the correct position. Make sure that the position holder is mounted at right angles. Noise when opening or closing the sliding door. Make sure that the screws of the position holder are not too tight. Turn the door height adjustment max. one step down to increase the distance between driver and cut surface of the position. The sliding door closes too slowly. Make sure the floor is flush, if necessary exchange the sliding door brake. For slopes you need a sliding door brake for higher weight category. 12 raumplus GmbH Dortmunder Straße Bremen Germany Tel: +49 (0) 421 / Fax: +49 (0) 421 /

DACAPO. Joint Cleansky-FCH Workshop on FCH technologies in aeronautics Lampoldshausen, 15./16. Sep The energy-autonomous cabin

DACAPO. Joint Cleansky-FCH Workshop on FCH technologies in aeronautics Lampoldshausen, 15./16. Sep The energy-autonomous cabin Joint Cleansky-FCH Workshop on FCH technologies in aeronautics Lampoldshausen, 15./16. Sep. 2015 DACAPO The energy-autonomous cabin Ronny A. Knepple Head of Energy Systems A Joint Diehl Thales Company