HSS-CO - HSSE - PM - XPM Foret Carbure - Foret HSS - Foret HSSE - Foret XPM
|
|
- Julie Eaton
- 6 years ago
- Views:
Transcription
1 H-CO - HE - PM - XPM oret Carbure - oret H - oret HE - oret XPM TARAU-ORET 2017
2 Guide implifié pour la Gamme Taraud Trous ébouchants Type Product Name C 0,2% C 0,4% C 0,45% Acier allié 900N Acier à outil 1000N acier coulé HRC HRC HRC INOX GG GGG Cuivre laiton POT Page 4 C. de coupe HE isponible également en Métrique in et Gaz -POT OX Page 4 C. de coupe HE laiton coulé bronze alu alu coulé titane nickel VA-POT OX Page 4 C. de coupe HE isponible également en Métrique in, UNC, UNJC, UN, UNJ et Gaz TICN-POT TiCN Page 4 C. de coupe HE CC-POT CrN Page 5 C. de coupe HE isponible également en Métrique in A-POT Page 5 C. de coupe HE A-POT V Page 5 C. de coupe PM isponible également en Métrique in, 6G, 7G, long, coupe à gauche, Weldon, M 6G, UNC/UNJC, UN/UNJ, BW, B, BA, Gaz, RC et avec arrosage au centre VP-H-POT TiCN Page 5 C. de coupe PM isponible également en Métrique in WHR-NI-POT HR Page 6 C. de coupe 2-4 PM isponible également en UNJC ET UNJ V-TI-POT TiCN Page 6 C. de coupe 4-6 PM isponible également en UNJC ET UNJ VP-C-MT TiCN Page 6 C. de coupe PM isponible également en Métrique in avec entrée extra-courte et avec l arrosage par le centre V-XPM-HT TiCN Page 6 C. de coupe 1-3 XPM -XP V Page 6 C. de coupe H-Co isponible également en Métrique in, 6G, 7G, entrée E et, long, coupe à gauche, Weldon, M 6G, UNC/UNJC, UN/UNJ, Gaz, carbure et avec arrosage au centre 2
3 Guide implifié pour la Gamme Taraud Trous Borgnes Type Product Name C 0,2% C 0,4% C 0,45% Acier allié 900N Acier à outil 1000N acier coulé HRC HRC HRC INOX GG GGG Cuivre laiton T Page 7 C. de coupe HE isponible également en Métrique in et Gaz -T OX Page 7 C. de coupe HE laiton coulé bronze alu alu coulé titane nickel VA-T OX Page 7 C. de coupe HE isponible également en Métrique in, UNC, UNJC, UN, UNJ et Gaz et avec entrée extra-courte TICN-T TiCN Page 8 C. de coupe HE isponible également en Métrique in CC-T CrN Page 8 C. de coupe HE isponible également en Métrique in, UNC, UNJC, UN, UNJ, Gaz et hélicoïl CC-NEO-T TIN Page 8 C. de coupe HE A-T Page 8 C. de coupe HE isponible également en Métrique in A-T V Page 9 C. de coupe PM isponible également en M, 6G, 7G, +0.1, entrée E, long, coupe à gauche, Weldon, M 6G, UNC/UNJC, UN/UNJ, BW, B, BA, Gaz, avec arrosage au centre VP-H-T TiCN Page 9 C. de coupe PM WHR-NI-T HR Page 9 C. de coupe PM 1-3 isponible également en UNJC et UNJ V-TI-T TiCN Page 9 C. de coupe PM 3-5 isponible également en UNJC et UNJ VP-C-MT TiCN Page 6 C. de coupe PM isponible également en Métrique in avec entrée extra-courte et avec l arrosage par le centre V-XPM-HT TiCN Page 6 C. de coupe 1-3 XPM -XP V Page 6 C. de coupe H-Co isponible également en Métrique in, 6G, 7G, entrée E et, long, coupe à gauche, Weldon, M 6G, UNC/UNJC, UN/UNJ, Gaz, carbure et avec arrosage au centre 3
4 POT IO 2 M HE 6H B/4 371 EP M P l1 d a Price , ,8 2,1 13, ,5 0, ,8 2,1 12, , ,5 2,7 11, ,5 0, , , ,5 3,4 11, , ,9 11, ,9 11, , ,2 13, , , , ,2-11, , ,8 2,1 11, , ,5 2,7 11, ,5 3,4 11, , ,9 13, , ,5 15, , , , , , , , , , ,5 64, ,5 71, , , , , , ,80 -POT M HE OX IO 2 6H B/4 371 EP M P l1 d a Price , ,5 2,7 13, , ,5 3,4 13, , ,9 14, ,9 14, , ,2 16, , , , , , , , , , , , ,5 65, ,5 80,00 VA-POT M HE OX IO 2 6H B/4 371 EP M P l1 d a Price , ,8 2,1 15, ,2 0, ,8 2,1 15, ,5 0, ,8 2,1 15, , ,5 2,7 14, ,5 0, , , ,5 3,4 14, , ,9 14, ,9 15, , ,2 17, , ,50 TICN-POT , ,2-15, , ,8 2,1 15, , ,5 2,7 15, ,5 3,4 16, , ,9 17, , ,5 21, , , , , , , , , , ,5 67, ,5 82, , , , , , ,00 TiCN M HE IO 2 6H B/4 371 EP M P l1 d a Price ,4 45-2,8 2,1 19, , ,5 2,7 16, , ,5 3,4 16, , ,9 16, ,9 16, , ,2 20, , , , , , , , , , , , ,5 86, ,5 86,90 4
5 CC-POT CrN M HE IO 2 6H B/4 371 EP M P l1 d a Price , ,8 2,1 23, ,5 0, ,8 2,1 23, , ,5 2,7 20, , ,5 3,4 21, , ,9 21, ,9 22, , ,2 26, , , , ,2-23, , ,8 2,1 24, , ,5 2,7 24, ,5 3,4 25, , ,9 27, , ,5 33, , , , , , , , , , ,5 97, ,5 119, , , ,60 A-POT IO 2 M HE 6H B/4 371 EP M P l1 d a Price , ,8 2,1 15, ,5 0, ,8 2,1 15, , ,5 2,7 13, , ,5 3,4 13, , ,9 14, ,9 14, , ,2 16, , , , , , , , , , ,20 A-POT M PM V IO 2 6HX B/4 371 EP M P l d a Price , ,8 2,1 26, ,5 0, ,8 2,1 25, , ,5 2,7 22, , ,5 3,4 23, , ,9 23, ,9 24, , ,2 28, , , , , , , , , , , , ,5 108, ,5 133,70 VP-H-POT V IO 2 M PM 6HX B/5 371 EP M P l1 d a Price , ,8 2,1 34, ,5 0, ,8 2,1 34, , ,5 2,7 31, , ,5 3,4 33, , ,9 32, ,9 32, , ,2 38, , , , , , , , , , , , ,5 148, ,5 183, , , , , , ,70 5
6 WHR-NI-POT HR IO 2 M PM 6HX B/5 371 EP M P l d a Price , ,5 2,7 31, , ,5 3,4 32, , ,9 33, ,9 33, , ,2 37, , ,00 V-TI-POT , ,10 V IO 2 M PM 6H B/ EP M P l d a Price , ,5 2,7 38, , ,5 3,4 40, , ,9 41, ,9 41, , ,2 48, , , , ,90 VP-C-MT M PM V IO 2 6HX C/2,5 371 EP M P l1 d a Price , ,5 2,7 21, , ,5 3,4 21, , ,9 22, ,9 22, , ,2 26, , , , , , , , , , ,00 V-XPM-HT M XPM V IO 2 6HX C/2,5 EP M P l1 d a Price , ,5 2,7 26, , ,5 3,4 26, , ,9 26, ,9 27,30 EP M P l1 d a Price , ,9 30, , ,5 35, , ,00 -XP M H-Co V IO 2 6HX C/2,5 371 EP M P l1 d a Price , ,5 2,5 2,1 56, ,2 0, ,5 2,5 2,1 54, ,4 0, ,5 2,1 53, ,6 0, ,5 2,1 52, , ,8 2,1 42, ,5 0, ,8 2,1 41, , ,5 2,7 39, , ,5 3,4 40, , ,9 40, ,9 41, , ,2 45, , , , , , , , , , , , ,5 194, ,5 205, , , ,50 6
7 T M HE 40 IO 2 6H C/2,5 371 EP M P l1 d a Price , ,8 2,1 15, ,5 0, ,8 2,1 14, , ,5 2,7 12, ,5 0, , , ,5 3,4 12, , ,9 12, ,9 12, , ,2 13, , , , ,2-12, , ,8 2,1 12, , ,5 2,7 12, ,5 3,4 12, , ,9 13, , ,5 15, , , , , , , , , , ,5 67, ,5 75, , , , , , ,30 -T M HE OX 40 IO 2 6H C/2,5 371 EP M P l1 d a Price , ,5 2,7 14, , ,5 3,4 14, , ,9 15, ,9 15, , ,2 17, , , , , , , , , , , , ,5 69, ,5 85,80 VA-T M HE OX 40 IO 2 6H C/2,5 371 EP M P l1 d a Price , ,8 2,1 15, ,2 0, ,8 2,1 17, ,5 0, ,8 2,1 17, , ,5 2,7 15, ,5 0, , , ,5 3,4 15, , ,9 15, ,9 15, , ,2 18, , , , ,2-16, , ,8 2,1 16, , ,5 2,7 17, ,5 3,4 17, , ,9 19, , ,5 22, , , , , , , , , , ,5 71, ,5 88, , , , , , ,00 7
8 TICN-T M HE V 40 IO 2 6H C/2,5 371 EP M P l1 d a Price , ,8 2,1 19, , ,5 2,7 18, , ,5 3,4 18, , ,9 18, ,9 19, , ,2 22, , , , , , , , , , , , ,5 87, ,5 88,40 CC-T CrN HE IO 2 M 6H C/2,5 371 EP M P l1 d a Price , ,8 2,1 24, ,5 0, ,8 2,1 24, , ,5 2,7 21, , ,5 3,4 21, , ,9 22, ,9 22, , ,2 27, , , , ,2-24, , ,8 2,1 24, , ,5 2,7 25, ,5 3,4 25, , ,9 28, , ,5 33, , , , , , , , , , ,5 100, ,5 123, , , , ,50 CC-NEO-T M HE TIN 45 IO 2 6HX C/2,5 371 EP M P l1 d a Price , ,8 2,1 26, ,5 0, ,8 2,1 26, , ,5 2,7 23, , ,5 3,4 24, , ,9 24, ,9 24, , ,2 29, , , , , , ,30 A-T M HE 50 IO 2 6H C/2,5 371 EP M P l1 d a Price ,6 0, ,5 2,1 18, , ,8 2,1 15, ,2 0, ,8 2,1 15, ,5 0, ,8 2,1 15, , ,5 2,7 13, ,5 0, , , ,5 3,4 14, , ,9 14, ,9 14, , ,2 16, , , , , , , , , , ,40
9 V A-T M PM 45 IO 2 6HX C/2,5 371 EP M P l d a Price ,4 45 3,2 2,8 2,1 26, ,5 0, ,6 2,8 2,1 26, , ,5 2,7 23, ,7 63 5,6 4,5 3,4 24, ,8 70 6,4 6 4,9 24, ,9 24, , ,2 29, , , , , , , , , , , , ,5 111, ,5 136,30 VP-H-T V IO 2 M PM 15 6HX C/3 371 EP M P l1 d a Price , ,8 2,1 37, ,5 0, ,8 2,1 36, , ,5 2,7 32, , ,5 3,4 33, , ,9 33, ,9 35, , ,2 41, , , , , , , , , , , , ,5 157, ,5 194, , , , , , ,20 V-TI-T M PM V 10 IO 2 6H C/2,5 371 EP M P l d a Price ,6 0, ,5 2,1 42, , ,8 2,1 38, ,5 0, ,8 2,1 38, , ,5 2,7 39, , ,5 3,4 41, , ,9 41, ,9 42, , ,2 49, , , , ,20 WHR-NI-T M PM 11 HR IO 2 6HX C/2,5 371 EP M P l d a Price , ,5 2,7 32, , ,5 3,4 33, , ,9 34, ,9 34, , ,2 39, , , , ,80 9
10 Guide implifié pour la Gamme oret Type Product Name Acier Acier allié C 0,2% C 0,4% C 0,45% à outil 900N 1000N acier coulé HRC HRC HRC INOX GG GGG Cuivre laiton laiton coulé bronze alu alu coulé titane nickel EX-U-G TIN Page HE Vc isponible tous les 0,01 mm de 0,5 à 6 mm, tous les 0,1 de 6 à 13 mm et tous les 0,5 mm de 13 à 20 mm EX-U-GR TIN Page Vc HE isponible tous les 0,01 mm de 2 à 6 mm, tous les 0,1 de 6 à 13 mm et tous les 0,5 mm de 13 à 20 mm VPH-G V Page 17 XPM Vc isponible tous les 0,1 mm de 0,5 à 13 mm TX V Page HE Vc isponible en 10 x, 15 x, 20 x de 1,6 à 12 mm HYP-HP-3 TiAIN Page 20 Vc CARBIE isponible tous les 0,1 mm de 1 à 20 mm HYP-HPO-3 TiAIN Page CARBIE Vc isponible tous les 0,1 mm de 3 à 20 mm HYP-HP-5 TiAIN Page 23 CARBIE Vc isponible tous les 0,1 mm de 1 à 20 mm HYP-HPO-5 TiAIN Page Vc CARBIE isponible tous les 0,1 mm de 3 à 20 mm HYP-HPO-8 TiAIN Page Vc CARBIE isponible tous les 0,1 mm de 3 à 20 mm WO-U-3 WX Page 28 CARBIE Vc isponible tous les 0,1mm de 2,8 à 12mm et tous les 0,5 mm de 12 à 20 mm WO-U-5 WX Page 29 Vc CARBIE isponible tous les 0,1mm de 2,78 à 12mm et tous les 0,5 mm de 12 à 20 mm HYP- Page 30 Vc CARBIE isponible de 3 à 20 mm à 90, 120 et
11 EX-U-G HE TIN 35 ~40 h >12 <1 <2 >4 h8 N > 13 d l , , , , , , , , , ,5 3 30, , ,5 3 30, , ,5 3 30, , ,5 3 30, , ,5 3 30, , ,5 3 30, ,6 38 3,5 3 25, , , , , , , , , , , , , , , , ,5 3 28, , ,5 3 28, ,7 38 4,5 3 23, , ,5 3 25, , ,5 3 25, , ,5 3 25, , ,5 3 25, , ,5 3 25, , , , , , , , , , , , , , , , , , , , , , ,5 3 24, , ,5 3 24, , ,5 3 24, , ,5 3 24, ,9 38 5,5 3 21, , ,5 3 23, , ,5 3 23, , ,5 3 23, , ,5 3 23, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,20 11
12 EX-U-G HE TIN 35 ~40 h >12 <1 <2 >4 h8 N > 13 d l , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,30 12
13 EX-U-G HE TIN 35 ~40 h >12 <1 <2 >4 h8 N > 13 d l , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,30 13
14 EX-U-GR HE TIN 35 ~40 h >12 >4 h8 N > 13 d l , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,80 14
15 EX-U-GR HE TIN 35 ~40 h >12 >4 h8 N > 13 d l , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,70 15
16 EX-U-GR HE TIN 35 ~40 h >12 >4 h8 N > 13 d l , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,20 Conditions Inox Ti Alloy Al Cu Acier PH Ti AI 4V AC4C- AC C <90 Kg Vc Ø 13 ~ 18 m/min 10 ~ 14 m/min 8 ~ 12 m/min 6 ~ 10 m/min 63 ~ 100 m/min 25 ~ 50 m/min 32 ~ 40 m/min ,02~0, ,01~0, ,01~0, ,01~0, ,02~0, ,01~0, ,02~0, ,05~0, ,04~0, ,04~0, ,02~0, ,04~0, ,04~0, ,06~0, ,06~0, ,05~0, ,05~0, ,03~0, ,06~0, ,06~0, ,10~0, ,08~0, ,069~0, ,06~0, ,04~0, ,08~0, ,08~0, ,11~0, ,10~0, ,08~0, ,08~0, ,05~0, ,10~0, ,10~0, ,12~0, ,12~0, ,1~0, ,1~0, ,06~0, ,12~0, ,12~0, ,13~0, ,16~0, ,14~0, ,14~0, ,08~0, ,16~0, ,16~0, ,17~0, ,20~0, ,16~0, ,16~0, ,1~0, ,20~0, ,20~0, ,20~0, ,24~0, ,18~0, ,18~0, ,12~0, ,24~0, ,24~0, ,24~0, ,26~0, ,19~0, ,19~0, ,13~0, ,25~0, ,26~0, ,26~0, ,28~0, ,2~0, ,2~0, ,14~0, ,27~0, ,26~0, ,27~0, ,29~0, ,22~0, ,22~0, ,15~0, ,29~0, ,26~0, ,28~0, ,30~0, ,22~0, ,22~0, ,15~0, ,30~0, ,27~0, ,29~0, ,31~0, ,22~0, ,22~0, ,15~0, ,31~0, ,28~0, ,30~0, ,32~0, ,22~0, ,22~0, ,15~0, ,32~0, ,29~0, ,32~0, ,33~0, ,22~0, ,22~0, ,15~0, ,34~0, ,30~0, ,33~0, ,34~0, ,22~0, ,22~0, ,15~0, ,36~1, ,30~0, ,34~0,52 16
AD-2D NEW Drilling Solid carbide 2xD
l A-2 NEW rilling oli carbie 2x irst choice in quality an performance Carbie rill with EgiAs coating Up to 2x or general purpose steels an cast iron 112 sizes P P P P K K H H H C: 0,2% C: 0,25-0,4% C:
More informationDrilling Tools. Drilling Tools
Twist drills Miniature drills Sheet metal drills Spiral countersinks (core drills) Step drills Centre drills Taper pin drills Core drills 1 1.3 1.48 Solid carbide drills Solid carbide tapping Tools Carbide
More informationThreading tools to JIS standard
Taps for metric, metric-fine, UNC, UNF and PT threads For universal applications, stainless steel, cast iron and aluminium as well as for hard machining -PM high-performance taps with new TiAlN-coating
More informationInfo Overview - solid carbide twist drills (I) Drilling Tools
Info Overview - solid carbide twist drills (I) Brand 0 0 0 0 0 0 0 0 Company standard Company standard Company standard Company standard 6539 6539 6539 6539 5 x D Countersink Countersink Article number
More informationHSS ground for steel to 900 N/mm 2, aluminium alloys, brass, bronze. Use For producing screw through-holes DIN EN 20273,
Drilling Tools Step drills 184 Step drills T - Countersink angle - With straight shank - Cone envelope grind - Web-thinned chisel edge and surface treatment For producing threaded core holes and countersinks
More informationDrilling tools. From page Centring drills NC spot drills. Twist drills HSS, HSS/ Co, solid carbide. From page 10-6
tools entring drills N spot drills From page 10-3 Twist drills HSS, HSS/ o, solid carbide From page 10-6 Step drills one drill bits arbide masonry drill Bit tools From page 10-44 ircle cutters T-A Insert
More informationEX-(SUS) SERIES. TiN-coated HSSE precision drills EX-SUS-GDS EX-SUS-GDR EX-GDS EX-GDR
EX-(U) ERIE TiN-coate HE precision ris EX-U-G EX-U-GR EX-G EX-GR X Key features: EX-U eries EX-U-GR 485 sizes increments of 0.01 from 2.0-6.0mm EX-U-G Wie variety of in-between sizes 635 sizes, increments
More informationSolid carbide Twist Drills Overview
Solid carbide Twist Drills Overview Manufacturer ß 000000000000 DIN similar to 899 338 338 338 6539 6539 6539 6539 6539 6539 6539 6539 6539 Counters.cut.Counters.cut. 3 x D 3 x D 3 x D, IKZ 3 x D, IKZ
More informationMilling Tools Milling Tools
HSS-keyway milling cutters -finishing cutters -roughing cutters -radius milling cutters Solid carbide -universal end milling cutters - end milling cutters RockTec 52 and 65 - ALU end milling cutters -
More informationSolid Carbide Thread Milling
Solid Carbide Thread Milling 07 - '06 Contents Page GRADES OF COMBIDEX SOLID CARBIDE THREAD MILLS Micrograin 4 Order Example 4 ISO - Metric Thread 6O 5 ISO - Metric Fine Pitch Thread 6O 5 ISO - Metric
More informationDRILL INSERTS & HOLDERS
DRILL INSERTS & HOLDERS THROW-AWAY DRILL INSERTS DRILL INSERT HOLDERS HOLDER ACCE SSORIES General Introduction Throw-Away Drill Inserts and Holders The Throw-Away Inserts YG-1's throw-away drill inserts
More informationSolid Carbide Thread Milling
Ordering Code Standard Fine D D L L T Height Pitch/mm Solid Carbide Thread Milling Contents Information Page - ISO Metric & External Thread Page - 2 ISO Metric Pitch & Fine Pinch External Thread 60º Page
More informationPOWER PRICE UNI. powerful UNF METAL. UNCPower. power ful GOLD FOR. powerful TOP GEOMETRIES UNF PERFECT CHOICE VER. perfect thread form.
MADE BY UNIVERSALtaps TOP GEOMETRIES FORM EUNIVERSAL UNIVERSAL TAPS powerful perfect UNF longideal flutes choice tool life PROCESS RELIABLE PERFECT universal power ful UNC-THREAD ISO-METRIC THREADS GUHRING
More informationTable 1d - FSA for All Returns, Females Tax Year
PR 10 Newfoundland and Labrador A0A 20,250 597,345 1,920 1,720 2,580 3,150 1,960 1,610 1,360 1,030 1,020 740 550 460 630 470 410 290 290 70 20 A0B 8,850 249,804 780 740 1,200 1,520 1,010 790 540 430 370
More informationAssembly & operating VIDEOS online at: Les VIDÉOS d assemblage et d opération en ligne au:
Assembly & operating VIDEOS online at: Les VIDÉOS d assemblage et d opération en ligne au: http://murphycube.com 1A Parts List Liste des piéces Wood Block Block Slats Lattes x 3 Arm (Left Hand) Bras (côté
More informationEPP Series. High Performance, High Reliability Square & Corner Radius End Mills FEATURES
4 EPP Series Performance, Reliability Square & Corner Radius End Mills FEATURES Extremely rigid design and thin coating layer provide highly accurate finishes Improved flute design provides exceptional
More informationSW NON STANDARD. Français English
SW NON Français English 2013 L'INOX DANS LE BÂTIMENT BUILDING WITH STAINLESS STEEL EXPO INOX industrie leader dans la réalisation de produits en acier inox avec des solutions techniques et pour satisfaire
More informationVanne à manchon pneumatique Série VMC Air operated Pinch Valve of VMC Series
New! Vanne à manchon pneumatique Série VMC Air operated Pinch Valve of VMC Series Raccord à bride / Flange Filetage intérieur / Internal Thread Raccord clamp / Tri-Clamp Raccord à souder / Weld-on ends
More informationA110 - ENGINES REFECTION PARTS. A G 1108cc 1100VB bore/stroke 70x72. A cc bore/stroke 71,2 x 72
Page 1 A110 - ENGINES REFECTION PARTS A110 1100G 1108cc 1100VB bore/stroke 70x72 Set of liners and cast pistons Forged racing piston wtih rings (1 + 1,5 + 2,8 ) Original cast piston Cast iron liner Set
More informationVanne à manchon pneumatique Type VMC Air operated Pinch Valve type VMC
New! Vanne à manchon pneumatique Type VMC Air operated Pinch Valve type VMC Raccord à bride / Flange Filetage intérieur / Internal Thread Raccord clamp / Tri-Clamp Raccord à souder / Weld-on ends Raccord
More informationVannes à commande pneumatique pneumatically piloted valves
Vannes à commande pneumatique Distributeurs 3/2-5/2-5/3 avec raccordements G1/8 -G1/4 -G3/8 -G1/2 3/2-5/2-5/3 spool valves with G1/8 -G1/4 -G3/8 -G1/2 threaded ports Montage en ligne sur embases multiples
More informationDRILLS CARBIDE. Drills Carbide When productivity matters - 3xd 1
Drills Carbide When productivity matters - 3xd 1 to 12xd 1 hole depths - With & without internal coolant - Ultra fine grain type carbide - Technically advanced multi-layer coatings DRILL CARBIDE Drills
More informationGennaio TiN-coated HSSE precision drills EX-(SUS) SERIES EX-SUS-GDS EX-SUS-GDR EX-GDS EX-GDR
TiN-coate HE precision ris EX-(U) ERIE EX-U-G EX-U-GR EX-G EX-GR Gennaio 2017 Key features: EX-U eries EX-U-GR 485 sizes increments of 0.01 from 2.0-6.0mm EX-U-G Wie variety of in-between sizes 635 sizes,
More informationDrills Jobber, R40 UNI
Drills Jobber, - offers superior performance - for longer tool life 0955 9.55 133 87 10 D168 0955 0960 9.6 133 87 10 D168 0960 0970 9.7 133 87 10 D168 0970 0980 9.8 133 87 10 D168 0980 0990 9.9 133 87
More information60cc Mini Swift PROMOTIONAL - TaG
60cc Mini Swift PROMOTIONAL - TaG FEATURES - CARACTERISTIQUES Cylinder Volume Volume du cylindre 59.00 cm³ Bore Alésage 41.80 mm Max. theoretical bore Alèsage théoretique max. 42.10 mm Stroke Course 43
More informationUniversal milling tools Favora. passion for precision
Universal milling tools Favora passion for precision ToolService in Willich, Germany FRAISA thanks to tool reconditioning and material recycling www.bluecompetence.net End milling tools for
More informationACCOUPLEMENTS COUPLINGS ASYBCO
ACCOUPLEMENTS COUPLINGS ASYBCO PETROLEUM TANKER PRODUCTS Bayco BAYCO Bayco COUPLINGS RACCORDS BAYCO Adapteur / Adaptor A Raccord / Coupler B Racoord / Shank Coupler C Raccord / Coupler D Adapteur à
More informationDrills Jobber, DXJ D D D D
Drills Jobber, DXJ 0840 8.4 117 75 0840 0840 0850 8.5 117 75 0850 0850 0860 8.6 81 0860 0860 00 8.7 81 00 00 03 8.73 11/32 81 03 03 0880 8.8 81 81 0880 0880 0890 8.9 8.9 81 81 0890 0890 9.0 9.0 81 81 0910
More informationAluminium and (-2)* aluminium casting alloys *() * emulsion (long-chip) **
System components for installation Standard range of HELICOIL plus manual and machine taps Range of types Recommended guide values Manual Machine tap tap Through hole Blind hole Cutting Cooling All hole
More informationBI-METAL HSS M3 HOLESAWS WITH VARIABLE TEETH 4/6
7 BIMETAL HSS M3 HOLESAWS WITH VARIABLE TEETH / Holesaws Pink Ref. CB HSS M3 / INOX Al Cu Ni La DIAMETER Inches CB DIAMETER Inches CB CB CB1 CB17 CB19 CB CB21 CB22 CB2 CB CB27 CB29 CB CB CB33 CB CB37 CB3
More informationCC-SERIES (Chip Control - Series)
PRODUT INFORMATION -NEO-SFT -SFT -POT -HL-SFT -SFT-SPT VOL.3 -SERIES (hip ontrol - Series) ompetitor 600 (Holes) Work mteril Int. thred size SUS304 M8 1.25 Tpping length 16mm Hole size Ø 6.8 -SFT 1,500
More informationSolid Clamps Raccords orientables
Solid Clamps Raccords orientables Versions: Raccords orientables Éléments monoblocs Pour un montage plus rapide et économique Série industrie Fonte d aluminium Grande diversité Éléments monoblocs Éléments
More informationTHREADING TECHNOLOGY Ê-7 --Ê- THREADING TOOLS FOR AEROSPACE. ÓÇÎxÊ > ià>þ. /i ʳ{ ÊÎÓÊ{ ÊÈÎÊÈÎ >Ýʳ{ ÊÎÓÊ{ ÊÈ{ÊÈ{ > \Ê v J`VÃÜ Ãà V
DO-01-04-07..N THRADING TCHNOLOGY We hve mde every effort to ensure tht the informtion (drwings, prints, technicl dt) given is correct. However, we do not ssume ny responsibility for ny errors, omissions
More informationx x 14 B2033 B x x 14 B2049 B x x 16 B2008 B x 14 B2022
galets nus rollers (without bearings) ø.ext outside larg width Cage bearing seat ø.ext outside larg width Cage bearing seat 75 62 47 x 14 82 65 47 x 14 B2033 B2111 75 75 47 x 14 82 70 47 x 14 B2049 B2042
More information17/M/24 PHOTO DE L ARRIÈRE DU MOTEUR COMPLET PHOTO OF THE REAR OF THE COMPLETE ENGINE THIS PAGE CANCELS AND REPLACES PAGE 4 OF THE CIK-FIA FICHE
THIS PAGE CANCELS AND REPLACES PAGE 4 OF THE CIK-FIA FICHE PHOTO DE L ARRIÈRE DU MOTEUR COMPLET PHOTO OF THE REAR OF THE COMPLETE ENGINE Page 1 of 9 THIS PAGE CANCELS AND REPLACES PAGE 9 OF THE CIK-FIA
More information121 1/8 NPT Solenoid and pneumatic valves size 0,86 in
121 1/8 NPT Solenoid and pneumatic valves size 0,86 in General Features Construction: spool type Body size: 0,86 in Ports: 1/8 NPT Body material: technopolymer Single use: Yes Manifold use: No Available
More informationBluechip Tooling td Tel Table of Content Type Page range Metric M with chamfer M3 - M20 M5 - M Metric
Bluechip Tooling td info@bluechiptooling.co.uk Tel 024 7647 4819 Circular Milling Cutters in Solid Carbide Version -Coating Uncoated Types Best Prices Best Endurance from Ø 4 Short processing times by
More informationMOTEUR / ENGINE OK-Junior
FICHE D HOMOLOGATION HOMOLOGATION FORM Homologation N COMMISSION INTERNATIONALE DE KARTING - FIA MOTEUR / ENGINE OK-Junior Constructeur Manufacturer IAME S.P.A. ZINGONIA (I) Marque Make PARILLA Modèle
More informationCarbide Burs - Double Cut - Aluminium Cut - Comprehensive range of shapes to suit your application - Standard & extra length available - Sets &
CARBIDE BUR Carbide Burs - - Aluminium Cut - Comprehensive range of shapes to suit your application - tandard & extra length available - ets & merchandisers Carbide Burs Finder IO VDI aterial Group utton
More informationMOTEUR / ENGINE OK-Junior
FICHE D HOMOLOGATION HOMOLOGATION FORM Homologation N COMMISSION INTERNATIONALE DE KARTING - FIA MOTEUR / ENGINE OK-Junior Constructeur Manufacturer OTK KART GROUP S.R.L. (ITALY) Marque Make VORTEX Modèle
More informationCMT Vertical Mill-Thread
CMT Vertical Mill-Thread Carmex presents a new family of vertical thread milling indexable inserts and toolholders to perform a wide variety of threads. Advantages of CMT - Vertical Mill-Thread Ground
More informationALU-XP E T. The Alu-XP range: Exceptional performance and reliability.
The Alu-XP range: Exceptional performance and reliability. At Europa Tool we recognise that manufacturing components consistently and cost effectively is essential. To this aim, we have produced all data
More informationWATERSWIFT 60cc - TaG
WATERSWIFT 60cc - TaG FEATURES - CARACTERISTIQUES Cylinder volume Volume du cylindre 59.17 cm³ (60.00 cm³ max) Bore Alésage 41.81 mm Max. theoretical bore Alésage théorétique max. 42.10 mm Stroke Course
More informationMill - Thread Inserts and Kits
Mill - Thread s and Kits Mill-Thread tools for threading on CNC milling machines by using helical interpolation programs Advantages of Mill-Thread Tools Same toolholder and insert can produce both right-hand
More information125cc RL-C TaG FEATURES - CARACTERISTIQUES. Cylinder volume Volume du cylindre cm³. Bore Alésage. 54 mm
125cc RL-C TaG FEATURES - CARACTERISTIQUES Cylinder volume Volume du cylindre 123.67 cm³ Bore Alésage 54 mm Max. theoretical bore Alésage théorique max. 54.28 mm Stroke Course 54 mm Cooling system Système
More informationOil Levels & Windows. Niveaux d'huile et Voyants. Ölstandsanzeiger & Ölaugen
Oil Levels & Windows Niveaux d'huile et Voyants Ölstandsanzeiger & Ölaugen Oil Levels and Windows These units are used in industry to visually check the fluid level within a reservoir or gearbox. Vertical
More informationRotary burrs 238 PRECISION TOOLS
ROTARY BURRS 09 Rotary burrs The high-performance tungsten carbide rotary burrs provide maximum cutting edge stability with a simultaneous high tenacity of the cutting edge. Alu high-performance tungsten
More informationNHD - Improved Solid Carbide Drill
February 2016 1/12 NHD - Improved Solid Carbide Drill 2/12 KEY POINT TaeguTec is pleased to introduce a new solid carbide drill - NHD Drill - which is an improved line over the existing SHD and SHO drills
More informationIn this kit there should be: 1 x Engine Case Cover (ECC0085) 2 x M6x28mm long button head bolts PLEASE READ THESE INSTRUCTIONS FULLY BEFORE STARTING
FITTING INSTRUCTIONS FOR ECC0085 LHS WATER PUMP COVER TO FIT ALL WATER COOLED DUCATI S REMOVE REMOVE In this kit there should be: 1 x Engine Case Cover (ECC0085) 2 x M6x28mm long button head bolts PLEASE
More informationMarvel Industries Inc.
Page 1 of 9 CU-211 CHAIN CONTROL UNIT, HIDDEN DIRECT DRIVE ( 1 TO 1 ) END CAP INCLUDED 400 Sets / Box CU-03 CHAIN CONTROL UNIT, W/ARMS WITH REDUCTION GEAR ( 3 TO 1 ) END CAP INCLUDED 400 Sets / Box CU-05
More informationCylinder volume Volume du cylindre. Bore Alésage. Stroke Course. RPM limiter Limiteur de régime
125cc RL-C TaG FEATURES - CARACTERISTIQUES Cylinder volume Volume du cylindre 123.67 cm³ Bore Alésage 54 mm Max. theoretical bore Alésage théorique max. 54.28 mm Stroke Course 54 mm Cooling system Système
More informationPerformance requires quality.
131 - With straight shank and square - Left-hand spiral 7-8 - First cut 1/4 of the cutting length (l 2 ) - Accuracy Hand Reamers DIN 26. Not suitable for blind holes. d 1 l 2 l 1 d 2 131 2, 25 5 1,6 21
More informationCOMMISSION INTERNATIONALE DE KARTING - FIA
FICHE D HOMOLOGATION HOMOLOGATION FORM Homologation N COMMISSION INTERNATIONALE DE KARTING - FIA MOTEUR / ENGINE KF2 Constructeur Manufacturer OTK-KART-GROUP S.R.L.-(ITALY) Marque Make VORTEX Modèle Model
More informationCarbide Drills When productivity matters - Stub 1. to Long 1
CARBIDE DRILLS Carbide Drills When productivity matters - Stub 1 to Long 1 hole depths - With & without internal coolant - Ultra fine grain type carbide - Technically advanced multi-layer coatings Drill
More informationTooth shapes (DIN 1840) of circular metal saw blades. Tooth shape BW hypoid-toothed, bevelled on side-bevelled
Info Info 172-1751 Tooth shapes ( 184) of circular metal saw blades Tooth shape A fine tooth pitch Tooth shape B hypoid-toothed Tooth shape BW hypoid-toothed, bevelled on side-bevelled Tooth shape C High
More informationaluminium abrasive bending
aluminium abrasive bending TMS 400 0 135 125x125 220x65 45 130 115x115 170x60 Electric motor kw HP 1,45 2.0 Blade shaft revolutin rpm 3000 Max blade size 400 Weight without pedestal Kg 90 Weight with pedestal
More informationmachines for aluminium
machines for aluminium TMS 400 0 135 125x125 220x65 45 130 115x115 170x60 Electric motor kw HP 1,45 2.0 Blade shaft revolutin rpm 3000 Max blade size 400 Weight without pedestal Kg 90 Weight with pedestal
More informationCutting
wist drills Miniature drills Sheet metal drills Core drills Step drills Centring and spot drills aper pin drills Solid carbide drills Solid carbide tapping ools Carbide reversible cutting inserts wist
More informationCATERPILLAR EP PN/PNT avec protège conducteur standard
CATERPILLAR EP --0 PN/PNT avec protège conducteur standard LIVRET PIECES DE RECHANGE SPARE PARTS CATALOGUE Référence : SZ0.0. Edition 0 CATERPILLAR EP //0 PN/PNT PC STD SOMMAIRE SUMMARY PANNEAU AVANT SZ0..
More informationGAMME ECONOMIQUE. ECONOMICAL RANGE - ECO gamma GAMME ECONOMIQUE
GAMME ECONOMIQUE ECONOMICAL RANGE - ECO gamma GAMME ECONOMIQUE .porte-rideaux tube droit extensible 2 ventouses Aluminium. Non recoupable. Aluminium straight extending curtain rail. Rubber caps. Can not
More informationWDO-SUS. Coolant-through WDO carbide drill series for stainless steel WDO-SUS-3D WDO-SUS-5D
WDO-SUS -through WDO carbide drill series for stainless steel WDO-SUS-3D WDO-SUS-5D HIGHLY EFFICIENT TOOLS DESIGNED TO EXCEL IN DIFFICULT MACHINING ENVIRON MENT Finally, the answer you've been looking
More informationPRECITOOL SA r CH-2740 Moutier '
CH-2740 Moutier ' ++ 41 32 494 64 74 6 ++ 41 32 494 64 77 r l 2 foncer/tourner einstechen/drehen grooving/turning r X E r 617O avec rayon 617O mit Radius 617O with radius Revêtement - Beschichtung - Coating
More informationPROJECTEUR DE THÉÂTRE 650/1000W GX /1000W GX 9.5 THEATRE SPOTLIGHT 306 CODE OP OP DJ PD VI
PROJECTEUR DE THÉÂTRE 650/1000W GX 9.5 650/1000W GX 9.5 THEATRE SPOTLIGHT 306 MNTING DIFFERENT LENSES. OP15030001 OP15010006 DJ40219902 RPAPF00009 FPAGR00003 PD30000003 DJ30223218 DJ40052601 DU40309101
More informationTOE KICK AND ACCESSORIES
17 AND ACCESSORIES Why If the Leg Leveler offers cabinet protection then the Toe Kick will provide an esthetical result. Pourquoi Si le Pied Nivelleur offre une protection a l armoire donc le coup de pied
More informationHYDRO-PNEUMATICS. 1) Hydro-Pneumatic Tool De-Clamp Cylinders PCS Series ) Hydro-Pneumatic Intensifiers for Machining Centers... 1.
HYDRO-PNEUMATICS 1) Hydro-Pneumatic Tool De-Clamp Cylinders PCS Series... 1.310 2) Hydro-Pneumatic Intensifiers for Machining Centers... 1.330 HYDRAULIC CYLINDERS 1) LH7 Series... 2.110/1 Std. Mounting
More informationPRECISION THREADING TECHNOLOGY
PRECISION THREADING TECHNOLOGY TAPS DIES THREADING KITS CUSTOM-MADE PRODUCTS 2016 Precision and Quality Good quality is the best marketing, because satisfi ed customers underline our success. Our most
More informationPlan de présentation CSITC RT
Explication du test interlaboratoires international du CSITC Dernières évolutions et Démarche qualité du LTC Jean-Paul GOURLOT Formation en technologie cotonnière Afrique Francophone du 14 au 25/10/2013
More information7. catch BaSinS covers GrillS ater GullieS 8. rainw odular 9. M channels 10. floor drains Floor drains
10. floor drains 9. Modular cannels 8. rainwater GullieS 7. catc BaSinS covers GrillS Floor drains 2017 183 Floor drains: te best solution for all drainage applications 3 2,5 2 1,5 1 0,5 Flow rate ex EN1253-1
More informationApplication Datasheet
Application Datasheet Standard Designation for Cast s C83300-C83999: -Tin-Zinc and -Tin-Zinc-Lead s (Red and Leaded Red es) C84000-C84999: -Tin-Zinc and -Tin-Zinc-Lead s (Semi-Red and Leaded Semi-Red es)
More informationBridging the gap... R40 UNI SPM DRILLS. with carbide drills. for an on-site demonstration contact Sutton Tools on
Bridging the gap... with carbide drills R40 DRILLS for an on-site demonstration contact Sutton Tools on 1800 335 350 100% Australian Owned The 130 four facet point with a web profile grind combined with
More informationWDO-SUS. Coolant-through WDO carbide drill series for stainless steel WDO-SUS-3D WDO-SUS-5D
WDO-SUS -through WDO carbide drill series for stainless steel WDO-SUS-3D WDO-SUS-5D HIGHLY EFFICIENT TOOLS DESIGNED TO EXCEL IN DIFFICULT MACHINING ENVIRON MENT Finally, the answer you've been looking
More informationSN SN 600 SN SN 300
SNG 500 - SNG 600 SNU 500 - SNU 600 SNA 500 - SNA 600 SN 500 - SN 600 SN 200 - SN 300 SD 3100 SD 3000 114 DISPOSITIFS D'ÉTANCHÉITÉ - SEALING ARRANGEMENTS Joint en polyuréthane TSNG pour: SNG-SNU TSNG polyurethan
More informationINSTRUMENTATION D'ALÉSAGE DRILLING INSTRUMENTS
INSTRUMENTATION D'ALÉSAGE DRILLING INSTRUMENTS 500200 Instrumentation d alésage pour clou centromédullaire Désignation / Product description Qté. / Quntity 141 500200B Boîte vide avec un plateau / Empty
More informationGILDEMEISTER GM16 Tours - Pièces détachées Porte outils Appareillages - Pinces Lathes - Spare parts Tool Holders - Attachments - Collets ACROPOLE 369
GILDEMEISTER GM16 Tours - Pièces détachées Porte outils Appareillages - Pinces Lathes - Spare parts Tool Holders - Attachments - Collets 369 rue des Abeilles PAE Les Léchères 74460 Marnaz France Tel :
More informationX30 ROOKIE 60cc FEATURES - CARACTERISTIQUES. Cylinder volume Volume du cylindre cm³. Bore Alésage mm
X30 ROOKIE 60cc FEATURES - CARACTERISTIQUES Cylinder volume Volume du cylindre 59.45 cm³ Bore Alésage 41.81 mm Max. theoretical bore Alésage théorique max. 42.00 mm Stroke Course 43.30 mm Cooling system
More informationMOLD DATE & RECYCLING INSERTS
Products Table of Contents MOLD DTE & RECYCLING INSERTS Date Inserts...1 Double Date Stamp...2 Date Stamp Plus...3 Temperature Dater & Temperature Insert... Block Base & Block Insert...5 Interchangeable
More informationINDEX. Wolferal Saw & Tool Selection Manual The Jones Tool Co Ltd Introduction. Our 58th YEAR
Wolferal Saw & Tool Selection Manual 2007 INDEX Our 58th YEAR Characteristics of Cutting Steels and Saw Tooth Forms 2-3 Wolferal Premium Quality Cutting-Off Saw Blades 4-14 Wolferal Cutting Performance
More informationZamak Zink alloy Alliage zinc
Zamak Zink alloy Alliage zinc Mod 140 Zamak / Zink alloy / Alliage zinc 4-16 Aluminio / Aluminum / Aluminium 17-21 Latonado / Brassed / Laitoneé 22-28 Cuero / Leather / Cuir 29-33 Inoxidable / Stainless
More informationFEDERATION INTERNATIONALE DE L AUTOMOBILE
FEDERATION INTERNATIONALE DE L AUTOMOBILE Date 05.12.2016 FICHE DE PRESENTATION DES SYSTEMES D EXTINCTION FIXES (NORME FIA 8865-2015) PRESENTATION FORM FOR PLUMBED-IN FIRE EXTINGUISHER SYSTEMS (FIA STANDARD
More informationSujet / Subject Modification de design des bouchons MIL-DTL séries III, RJFTV, USBFTV et RJ11FTV.
Avis de Modification Produit / Process Product / Process Change Notification Nb de pages / No. of pages 10 Référence / Reference PCN 115843 Date de Diffusion / Issue Date March 2017 10/03/17 Familles Produit
More informationjust the right angle
Lap out 3451 just the right angle cutting edge solid sentry Lap out 3451 LAP OUT 3451 Anatomy PROJECT PROJET ORDERING SPECIFICATION SPÉCIFICATION DE COMMANDE CODE SPEC TYPE NOTES MODEL MODÈLE 3451 3451
More informationAIR HEATERS AIR TOP EVO 3900 / 5500 Diesel and Gasoline Versions Spare Parts List
AIR HEATERS AIR TOP EVO 3900 / 5500 Diesel and Gasoline Versions Spare Parts List Parts for Heater External / Pieces pour chauffe - externes 11 1 1310581A Grill Inlet / Entrée d air avec grille [1] 2 88004C
More informationAQUA DRILL EX OIL-HOLE LONG
AQUA DRILL EX OIL-HOLE LONG HIGH-EFFICIENT DEEP HOLE DRILL CELEBRATE THE POLE POSITION NEW AQUA EX COATING Deep-Hole Drills Aquadrill EX Oil-hole long Reliable and Durable in Largest Drill Depths High-Efficient
More informationSeries Features: Diameters:.312,.375,.500,.625,.750, 1.000, 1.250, 1.500
New design indexable threadmilling inserts and tool holders allow for a profitable and effective way to produce external and internal applications quickly while generating superior surface finish. Diameters:.312,.375,.500,.625,.750,
More informationSuper. Line. 10th Edition SUPER PRICE SUPER QUALITY SUPER AVAILABILITY
Super Line SUPER PRICE SUPER QUALITY SUPER AVAILABILITY 10th Edition High-tech tools at a super price convincing price-performance-ratio exceptional quality immediate availability customer-friendly service
More informationR185A STRAIGHT JACK EZ FIT TYPE. 1 5/8" CORRUGATED CABLE Series : ECO 7/16 TECHNICAL DATA SHEET 1 / 5 MATERIALS. PLATING (µm) COMPONENTS
.. pn ao TECHNICAL DATA SHEET 1 / 5 All dimensions are in mm. COMPONENTS MATERIALS PLATING (µm) BODY CENTER CONTACT OUTER CONTACT INSULATOR GASKET OTHERS PARTS BRASS BRONZE PTFE SILICONE RUBBER BRASS BBR
More informationMiniature Fuses p. 226
Fuses & Fusegear Miniature Fuses p. 226 Miniature fuses IEC Glass body GP003 p. 227 Miniature fuses IEC Ceramic body GP003 p. 228 Miniature fuses Glass body GP003 p. 229 to 230 Other Miniature fuses Miniature
More informationAmphenol Air LB. Contacts & Outillages. Contacts & Tooling
Contacts & lages Contacts & ing Amphenol Air LB Edition 05/12 SYSTEMES DE CONNEXIONS ELECTRIQUES ET ELECTRONIQUES ELECTRIC AND ELECTRONIC CONNECTION SYSTEMS 104 CONTACTS MODULES & SPLICES / MODULES & SPLICES
More information2 Surface Treatment. TiN coating
DILL Guide of ( Specification) Icons 1 Materials 2 Surface Treatment CD olycrystalline Diamond CD HSS-Co Cobalt HSS WX (TiAIN) coating Diamond coating CABIDE Tungsten Carbide HSSE High Vanadium HSS FX
More informationLISTE DES PIÈCES DE RECHANGE
LISTE DES PIÈCES DE RECHANGE Mar 2017/ Mars 2018 48-S 174 48-R 524 48-R 522 48-S175 48-S 174 48-S 175 48-R 526 48-S 174 48-R 523 48R522 48R523 48S174 48S175 48R524 48R526 SCREEN-PRINTED PANEL PANNEAU IMPRIMÉ
More informationIndex. Primary components - back sections Composantes principales - traverses ou meneaux
Thermally broken Split mullion curtain wall - Capped and SSG 2 /2" (63.5mm) profile. Available in 5 /4"(33.4mm) and 6 5/8"(68.3mm) depths. Mur-rideau à meneaux en deux sections avec bris thermique.vss
More informationSR-SAF Ball nose roughing endmill
/ BALL NOSE ENDMILLS SR-SAF Ball noe roughing endmill Cutter program, SR 10-20 m m m m m m (CM) ød 5m th l 3 l 3 Long cylindrical hank Weldon hank More taper Threaded modular head Reference D c D 3 Max.
More informationFICHE D HOMOLOGATION HOMOLOGATION FORM COMMISSION INTERNATIONALE DE KARTING - FIA. MOTEUR / ENGINE OK-Junior
Homologation N FICHE D HOMOLOGATION HOMOLOGATION FORM COMMISSION INTERNATIONALE DE KARTING - FIA MOTEUR / ENGINE OK-Junior Constructeur Manufacturer ASPA S.R.L. Marque Make MODENA ENGINES Modèle Model
More informationWORK IN PROGRESS. Multibrand sites. Renault Store - Application guide Visual identity rules / Europe G9 Region
Renault Store - Application guide Visual identity rules / Europe G9 Region Multibrand sites The exterior signage for commercial sites is currently being updated. The new standards will be made available
More informationWEAVEBIRD LOOM TROUBLE SHOOTING GUIDE
1573 Savoie C. P. 4 Plessisville, Qc. G6L 2Y6 TEL: 819-362-7207 FAX: 819-362-2045 www.leclerclooms.com info@leclerclooms.com WEAVEBIRD LOOM TROUBLE SHOOTING GUIDE If you have problems when starting the
More information7 SUBSIDIARIES 70 COUNTRIES 125 MLN MOTOVARIO KEY FIGURES LOGISTIC ITALY HEADQUARTER ITALY PRODUCTION FOUNDATION HOURS ON 24 SQM OF
CORPORATE &PRODUCTS MOTOVARIO KEY FIGURES 1965 FOUNDATION more than 70 COUNTRIES over 600 EMPLOYEES WORLDWIDE PRODUCTION 24 HOURS ON 24 50.000 SQM OF PRODUCTION PBH VSF H B S D M 7 SUBSIDIARIES 125 MLN
More informationFEDERATION INTERNATIONALE DE L AUTOMOBILE
FEDERATION INTERNATIONALE DE L AUTOMOBILE 06.03.2017 FICHE DE PRESENTATION DES SYSTEMES D EXTINCTION FIXES (NORME FIA 8865-2015) PRESENTATION FORM FOR PLUMBED-IN FIRE EXTINGUISHER SYSTEMS (FIA STANDARD
More informationLumination TM LED Luminaire RC/LRC/RX/LRX Series - New Construction Frame
Installation Guide Lumination TM LED Luminaire RC/LRC/RX/LRX Series - New Construction Frame BEFORE YOU BEGIN Read these instructions completely and carefully. RISK OF ELECTRIC SHOCK Turn power off before
More informationFEDERATION INTERNATIONALE DE L AUTOMOBILE
FEDERATION INTERNATIONALE DE L AUTOMOBILE Date 30.11.2015 FICHE DE PRESENTATION DES SYSTEMES D EXTINCTION FIXES (NORME FIA 8865-2015) PRESENTATION FORM FOR PLUMBED-IN FIRE EXTINGUISHER SYSTEMS (FIA STANDARD
More informationCKG Series Commercial Grade MEGACAP Type
CKG Series Commercial Grade MEGACAP Type Type: CKG32K [EIA CC1210] CKG45K [EIA CC1812] CKG45N [EIA CC1812] CKG57K [EIA CC2220] CKG57N [EIA CC2220] Issue date: April 2013 REMINDERS Please read before using
More information