Proximity Inductive Sensors DC Metal Face Types IA, M8, M12, M18 and M30

Transcription

1 Proximity Inductive Sensors Metal Face Types I, M8, M12, M18 and M30 Sensing distance: 1 to 15 mm Flush and nonflush types Long and short housing Rated operational voltage: V Output: 100 m, NPN or PNP Normally open, Normally closed Output indication: by yellow L Protection: reverse polarity, short circuit, transients able and plug versions Product escription family of metal face inductive proximity switches in industrial standard stainless steel housings (M8, M12, M18 and M30 types). Output indication: by yellow L. Outputs are open collector NPN or PNP transistors. vailable with cable and M8 or M12 plug. These sensors stand up to abrasion and impact caused by flying metal chips, grit and misaligned or vibrating targets. In addition, the stainless steel body resists against corrosion and chemical attack, by offering a higher level of protection for more reliable operation and longer life in harsh environments. Type Selection M8, M12 and M18 Ordering Key Type Housing style Housing size Housing material Housing length etection principle Sensing distance Output type Output configuration onnection type I08FLF01NOM5 Housing onnec Housing Rated Ordering no. Ordering no. Ordering no. Ordering no. diameter tion style operating NPN PNP NPN PNP distance S n Normally open Normally open Normally closed Normally closed M8 able Short 1 mm 1) I 08 FSF 01 NO I 08 FSF 01 PO I 08 FSF 01 N I 08 FSF 01 P M8 Plug Short 1 mm 1) I 08 FSF 01 NOM5 I 08 FSF 01 POM5 I 08 FSF 01 NM5 I 08 FSF 01 PM5 M8 able Long 1 mm 1) I 08 FLF 01 NO I 08 FLF 01 PO I 08 FLF 01 N I 08 FLF 01 P M8 Plug Long 1 mm 1) I 08 FLF 01 NOM5 I 08 FLF 01 POM5 I 08 FLF 01 NM5 I 08 FLF 01 PM5 M8 able Short 2 mm 2) I 08 FSN 02 NO I 08 FSN 02 PO I 08 FSN 02 N I 08 FSN 02 P M8 Plug Short 2 mm 2) I 08 FSN 02 NOM5 I 08 FSN 02 POM5 I 08 FSN 02 NM5 I 08 FSN 02 PM5 M8 able Long 2 mm 2) I 08 FLN 02 NO I 08 FLN 02 PO I 08 FLN 02 N I 08 FLN 02 P M8 Plug Long 2 mm 2) I 08 FLN 02 NOM5 I 08 FLN 02 POM5 I 08 FLN 02 NM5 I 08 FLN 02 PM5 M12 able Short 2 mm 1) I 12 FSF 02 NO I 12 FSF 02 PO I 12 FSF 02 N I 12 FSF 02 P M12 Plug Short 2 mm 1) I 12 FSF 02 NOM1 I 12 FSF 02 POM1 I 12 FSF 02 NM1 I 12 FSF 02 PM1 M12 able Long 2 mm 1) I 12 FLF 02 NO I 12 FLF 02 PO I 12 FLF 02 N I 12 FLF 02 P M12 Plug Long 2 mm 1) I 12 FLF 02 NOM1 I 12 FLF 02 POM1 I 12 FLF 02 NM1 I 12 FLF 02 PM1 M12 able Short mm 2) I 12 FSN 0 NO I 12 FSN 0 PO I 12 FSN 0 N I 12 FSN 0 P M12 Plug Short mm 2) I 12 FSN 0 NOM1 I 12 FSN 0 POM1 I 12 FSN 0 NM1 I 12 FSN 0 PM1 M12 able Long mm 2) I 12 FLN 0 NO I 12 FLN 0 PO I 12 FLN 0 N I 12 FLN 0 P M12 Plug Long mm 2) I 12 FLN 0 NOM1 I 12 FLN 0 POM1 I 12 FLN 0 NM1 I 12 FLN 0 PM1 M18 able Short 5 mm 1) I 18 FSF 05 NO I 18 FSF 05 PO I 18 FSF 05 N I 18 FSF 05 P M18 Plug Short 5 mm 1) I 18 FSF 05 NOM1 I 18 FSF 05 POM1 I 18 FSF 05 NM1 I 18 FSF 05 PM1 M18 able Long 5 mm 1) I 18 FLF 05 NO I 18 FLF 05 PO I 18 FLF 05 N I 18 FLF 05 P M18 Plug Long 5 mm 1) I 18 FLF 05 NOM1 I 18 FLF 05 POM1 I 18 FLF 05 NM1 I 18 FLF 05 PM1 M18 able Short 8 mm 2) I 18 FSN 08 NO I 18 FSN 08 PO I 18 FSN 08 N I 18 FSN 08 P M18 Plug Short 8 mm 2) I 18 FSN 08 NOM1 I 18 FSN 08 POM1 I 18 FSN 08 NM1 I 18 FSN 08 PM1 M18 able Long 8 mm 2) I 18 FLN 08 NO I 18 FLN 08 PO I 18 FLN 08 N I 18 FLN 08 P M18 Plug Long 8 mm 2) I 18 FLN 08 NOM1 I 18 FLN 08 POM1 I 18 FLN 08 NM1 I 18 FLN 08 PM1 1) For flush mounting in metal 2) For nonflush mounting in metal Specifications are subject to change without notice ( ) 1

2 Metal Face Type Selection M30 Housing onnec Housing Rated Ordering no. Ordering no. Ordering no. Ordering no. diameter tion style operating NPN PNP NPN PNP distance S n Normally open Normally open Normally closed Normally closed M30 able Short 10 mm 1) I 30 FSF 10 NO I 30 FSF 10 PO I 30 FSF 10 N I 30 FSF 10 P M30 Plug Short 10 mm 1) I 30 FSF 10 NOM1 I 30 FSF 10 POM1 I 30 FSF 10 NM1 I 30 FSF 10 PM1 M30 able Long 10 mm 1) I 30 FLF 10 NO I 30 FLF 10 PO I 30 FLF 10 N I 30 FLF 10 P M30 Plug Long 10 mm 1) I 30 FLF 10 NOM1 I 30 FLF 10 POM1 I 30 FLF 10 NM1 I 30 FLF 10 PM1 M30 able Short 15 mm 2) I 30 FSN 15 NO I 30 FSN 15 PO I 30 FSN 15 N I 30 FSN 15 P M30 Plug Short 15 mm 2) I 30 FSN 15 NOM1 I 30 FSN 15 POM1 I 30 FSN 15 NM1 I 30 FSN 15 PM1 M30 able Long 15 mm 2) I 30 FLN 15 NO I 30 FLN 15 PO I 30 FLN 15 N I 30 FLN 15 P M30 Plug Long 15 mm 2) I 30 FLN 15 NOM1 I 30 FLN 15 POM1 I 30 FLN 15 NM1 I 30 FLN 15 PM1 1) For flush mounting in metal 2) For nonflush mounting in metal Specifications Rated operational voltage (U ) 10 to 30 V Ripple < 10% Output current (I e) No load supply current (I O) I08, I12FxF, I18FxF, I30FxF < 10 m I12FxN, I18FxN, I30FxN < 20 m Voltage drop (U d) I08 < 1.5 V I12, I18, I30 < 2.0 V Protection Reverse polarity, shortcircuit, transients Voltage transient 1 kv Power ON delay (t v) < 10 ms Operating frequency (f) I08Fxxxxxx 500 Hz I12FxFxxxx I12FxNxxxx I18FxFxx I18FxNxx I18FxFxxM1 I18FxNxxM1 500 Hz I30FSFxx I30FSNxx I30FLFxx 300 Hz I30FLNxx 150 Hz I30FxFxxM1 I30FxNxxM1 Indication for output ON L, yellow Operating sensing distance (S a) 0 S a 0.81 x S n ffective operating distance (S r) 0.9 x S n S r 1.1 x S n Usable operating distance (S u) 0.9 x S r S u 1.1 x S r Repeated accuracy (R) 5% ifferential travel (H) (Hysteresis) 1 to 20% of sensing dist. mbient temperature Operating 25 to 70 (13 to 158 F) Storage 25 to 70 (13 to 158 F) Humidity (noncondensing) 35 to 95% RH Housing material ody, Front Stainless steel ISI 30 ackpart Plug P66 able PV Nuts Stainless steel onnection able I08 2 m, 3 x 0.15 mm 2, Ø 3 mm, Grey PV I12, I18 2 m, 3 x 0.15 mm 2, Ø mm, I30 Plug I08 M8 x 1 Grey PV 2 m, 3 x 0.50 mm 2, Ø 5.8 mm, Grey PV I12, I18, I30 M12 x 1 ables for plug (1) ONH1/ONH1O series egree of protection IP 67 Weight I08FSFxx I08FSFxxM5 I08FLFxx I08FLFxxM5 I08FSNxx I08FSNxxM5 I08FLNxx I08FLNxxM5 I12FSFxx I12FSFxxM1 I12FLFxx I12FLFxxM1 I12FSNxx I12FSNxxM1 I12FLNxx I12FLNxxM1 I18FSFxx I18FSFxxM1 I18FLFxx I18FLFxxM1 I18FSNxx I18FSNxxM1 I18FLNxx I18FLNxxM1 18 g 17 g 31 g 0 g 67 g 153 g 30 g 38 g 65 g 1 g 110 g 7 g 153 g 9 g 92 g 70 g 1 g 91 g 2 Specifications are subject to change without notice ( )

3 Metal Face Specifications (cont.) Weight (cont.) I30FSFxx 16 g I30FSFxxM1 200 g I30FLFxx 217 g I30FLFxxM1 187 g I30FSNxx 138 g I30FSNxxM1 200 g I30FLNxx 207 g I30FLNxxM1 179 g Tightening torque I08 I12 I18 I30 marking.5 Nm 25.0 Nm 60.0 Nm Nm Yes imensions Type escription (mm) (mm) (mm) (mm) (mm) I 08 FSF 01 xx M8 x 1 x 30 M8 x 1 30 I 08 FSF 01 xx M5 M8 x 1 x 5 M8 x 1 5 M8 x 1 I 08 FLF 01 xx M8 x 1 x 5 M8 x 1 5 I 08 FLF 01 xx M5 M8 x 1 x 60 M8 x M8 x 1 I 08 FSN 02 xx M8 x 1 x 30 M8 x I 08 FSN 02 xx M5 M8 x 1 x 5 M8 x M8 x 1 I 08 FLN 02 xx M8 x 1 x 5 M8 x I 08 FLN 02 xx M5 M8 x 1 x 60 M8 x M8 x 1 I 12 FSF 02 xx M12 x 1 x 30 M12 x 1 30 I 12 FSF 02 xx M1 M12 x 1 x 50 M12 x 1 50 M12 x 1 I 12 FLF 02 xx M12 x 1 x 50 M12 x 1 50 I 12 FLF 02 xx M1 M12 x 1 x 68 M12 x M12 x 1 I 12 FSN 0 xx M12 x 1 x 30 M12 x I 12 FSN 0 xx M1 M12 x 1 x 50 M12 x M12 x 1 I 12 FLN 0 xx M12 x 1 x 50 M12 x I 12 FLN 0 xx M1 M12 x 1 x 68 M12 x M12 x 1 I 18 FSF 05 xx M18 x 1 x 35 M18 x 1 35 I 18 FSF 05 xx M1 M18 x 1 x 8 M18 x 1 8 M12 x 1 I 18 FLF 05 xx M18 x 1 x 55 M18 x 1 55 I 18 FLF 05 xx M1 M18 x 1 x 79 M18 x M12 x 1 I 18 FSN 08 xx M18 x 1 x 35 M18 x I 18 FSN 08 xx M1 M18 x 1 x 8 M18 x M12 x 1 I 18 FLN 08 xx M18 x 1 x 55 M18 x I 18 FLN 08 xx M1 M18 x 1 x 79 M18 x M12 x 1 I 30 FSF 10 xx M30 x 1.5 x 35 M30 x I 30 FSF 10 xx M1 M30 x 1.5 x 8 M30 x M12 x 1 I 30 FLF 10 xx M30 x 1.5 x 55 M30 x I 30 FLF 10 xx M1 M30 x 1.5 x 78 M30 x M12 x 1 I 30 FSN 15 xx M30 x 1.5 x 35 M30 x I 30 FSN 15 xx M1 M30 x 1.5 x 8 M30 x M12 x 1 I 30 FLN 15 xx M30 x 1.5 x 55 M30 x I 30 FLN 15 xx M1 M30 x 1.5 x 78 M30 x M12 x 1 Specifications are subject to change without notice ( ) 3

4 Metal Face imensions: cable type I xx FSF xx I xx FSN xx I xx FLF xx I xx FLN xx imensions: plug type L L L L I xx FSF xx Mx I xx FSN xx Mx I xx FLF xx Mx I xx FLN xx Mx Wiring i a grams 1 N 1 N 1 N 1 N K 2 WH 2 WH K 3 U 3 U 3 U 3 U NPN Normally open NPN Normally closed PNP Normally open PNP Normally closed Specifications are subject to change without notice ( )

5 Metal Face Installation Hints To avoid interference from inductive voltage/ current peaks, separate the prox. switch power cables from any other power cables, e.g. motor, contactor or solenoid cables Relief of cable strain Protection of the sensing face Switch mounted on mobile carrier Incorrect orrect The cable should not be pulled proximity switch should not serve as mechanical stop ny repetitive flexing of the cable should be avoided elivery ontents Inductive proximity switch I.. 2 stainless steel nuts 1 stainless steel washer Packaging: plastic bag Specifications are subject to change without notice ( ) 5