Electronic Pressure Switches
|
|
- Virgil Henry
- 6 years ago
- Views:
Transcription
1 96 Pressure Switches Electronic Pressure Switches Electronic
2 E.5 switching output Electronic pressure switches, High-Performance series with one switching output Outstanding overpressure protection (up to 4 x) Ideal choice for mobile hydraulic applications Long service life even under high pressure change rates All welded design, no elastomeric seal Wetted parts made of stainless steel and titanium ensuring excellent media compatibility Silicon-on-sapphire technology (SoS) for highest reliability, accuracy and reliable process monitoring Very low temperature error and very good long-term stability Adjustment of switching point and hysteresis at factory For versions with switching outputs, please refer to chapter E.6, page 6
3 Electronic pressure switches, High-Performance series Technical details Type: 0530 NO 053 NC 053 NO 0533 NC Number of transistor outputs: PNP output (High Side N-channel MOSFET) NPN output (Low Side N-channel MOSFET) Supply voltage: 9,6-3 VDC Idle power consumption: < 5mA Standard adjustment range p nom : 0 0 bar 0 5 bar 0 00 bar 0 50 bar bar ) Overpressure protection p u : 40 bar 00 bar 400 bar,000 bar,650 bar Burst pressure ) : 80 bar 00 bar 800 bar,000 bar,000 bar Mechanical life expectancy: Permitted pressure change rate: Switching point adjustment range: Hysteresis: Accuracy: Resolution: Switching delay: Output: Operating mode: 0,000,000 pulsations at rise rates to 5 bar/ms p nom 5 bar/ms 00 % of the nominal pressure range (Full Scale, FS), programmable at factory % of the nominal pressure range (FS), programmable at factory (set to 5% of the switching point as standard) ±0.5 % of the nominal pressure range (FS) at room temperature, ±0.5 % BFSL 0. % of the nominal pressure range (FS) ON (0 0.5 s) / OFF (0 s) delay in increments of ms, irrespective of switching point, programmable at factory (specify value when ordering, otherwise default value of 0 s is set) 0.5 A transistor output with short-circuit and overvoltage protection with hysteresis or window function (see page 0), programmable at factory Long term stability: ±0. % FS p. a. Repeatability ) : Temperature error ) : Compensated temperature range: Temperature range media: Temperature range ambient: Wetted parts material: ±0. % FS ±0.0 % / K FS -0 C +80 C (- 4 F +76 F) - 40 C +5 C (- 40 F +57 F) - 40 C +00 C (- 40 F + F) Stainless steel.4305 (AISI 303) and titanium E Housing material: Stainless steel.4305 (AISI 303) Insulation resistance: > 00 MΩ (500 VDC, Ri > 4 Ω) Switching time: < ms Vibration resistance: 0 g at Hz sine wave; DIN EN Shock resistance: half sine wave 500 m/s²; ms; DIN EN Protection class: Refer to the electrical connections EMC: EMC 04/30/EU, EN :005, EN :007 Protection against reverse polarity, short-circuit and over voltage surges: built-in Weight: approx. 80 g (DIN 7530 approx. 0 g, cable version approx. 35 g) ) Static pressure. Dynamic value is 30 to 50 % lower. Values refer to the hydraulic/pneumatic part of the electronic pressure switch. ) Within the compensated temperature range. 3
4 E.5 switching output 0530 / 053 / 053 / 0533 Electrical connectors and threads DIN EN A M DIN EN A ISO A - 4. AMP Superseal.5 d PE 3 LED x Uv+ 3 U out PE PE IP65 x ~ 60 / 76 mm* d ~ Ø 30 mm Order number: 03 Uv+ nc 3 Gnd 4 Out x ~ 54 mm d ~ Ø mm Order number: 00 Uv+ 3 U out 4 nc, IP6K9K x ~ 65 mm d ~ Ø 7 mm Order number: 004 Out 3 Uv+ x ~ 73 mm d ~ Ø 6 mm Order number: 007 * x ~ 60 mm without coupler socket, x ~ 76 mm with coupler socket Deutsch DT04-4P Deutsch DT04-3P Cable connection Connection diagrams High Side Output (PNP) Low-Side Output (NPN) Load assignment depending on electrical connections *OUT only for series 054x Gnd Uv+ 3 nc 4 Out, IP6K9K x ~ 74 mm d ~ Ø 3 mm Order number: 008 Uv+ 3 Out, IP6K9K x ~ 74 mm d ~ Ø 3 mm Order number: 00 red white black Uv+ Out Gnd x ~ 44 mm (+ 0 mm bend relief ) cable length ~ m d ~ Ø mm Order number: 0 Load assignment depending on electrical connections *OUT only for series 054x FKM- Sealing ring G /4 DIN EN ISO 79- (DIN 385-), form E G /4 DIN 385-A Thread code: 4 Thread code: 03 Thread code: 04 Thread code: 09 0 NPT /8 4,5 NPT /4 8 9, FKM- Sealing ring 4 RoHS II compliant M0x DIN 385-A 7/6-0 UNF 9/6-8 UNF M4x,5 DIN EN ISO (DIN 385-), form E Thread code: 30 Thread code: 0 Thread code: Thread code: 4
5 0530 / 053 / 053 / 0533 Order matrix for electronic pressure switches E.5 switching output Type Adjustment range Pressure connection Pressure unit Electrical connection Type PNP output (High Side), NO 0530 PNP output (High Side), NC 053 NPN output (Low Side), NO 053 NPN output (Low Side), NC 0533 Max. Overpressure ) Burst pressure Adjustment range ) 40 bar 80 bar 00 bar 00 bar 400 bar 800 bar,000 bar,000 bar,650 bar,000 bar 0-0 bar (approx. 45 PSI) 0-5 bar (approx. 36 PSI) 0-00 bar (approx..450 PSI) 0-50 bar (approx PSI) bar (approx PSI) Pressure connection G /4 DIN EN ISO 79- (DIN 385-), form E 4 G /4 DIN 385-A 03 NPT /8 (max. 50 bar) 04 NPT /4 09 M0x zyl. DIN 385-A (max. 50 bar) 30 E 7/6 0 UNF (max. 50 bar) 0 9/6 8 UNF M4x,5 DIN EN ISO (DIN 385-), form E 4 Pressure unit bar B Electrical connection DIN EN A (DIN A); socket device included 03 M - DIN EN A 00 Bayonet ISO 570-A-4. (DIN 7585-A-4.) 004 AMP Superseal Deutsch DT04-4P 008 Deutsch DT04-3P 00 Cable connection (length of cable m standard) 0 Ordner number: 05XX XXX XX B XXX ) Please state switching point and hysteresis when ordering. ) Static pressure, dynamic pressure 30 to 50% lower. Value refers to the hydraulic or pneumatic part of the electronic pressure switch. RoHS II compliant 5
Electronic Pressure Switches
96 Pressure Switches Electronic Pressure Switches Electronic E.6 2 switching outputs Electronic pressure switches, High-Performance series with two switching outputs Outstanding overpressure protection
More informationElectronic Pressure Switches
96 Pressure Switches Electronic Pressure Switches Electronic Electronic pressure switches, series, Very attractively priced electronic pressure switches, particularly for high volume deployment High overpressure
More informationElectronic Pressure Switches
96 Pressure Switches Electronic Pressure Switches Electronic E. Electronic pressure switches, series, Very competitively priced electronic pressure switches High overpressure protection (up to x) Small,
More informationSeal material. Pressure range. Pressure connection -40 F +212 F 1 -4 F +257 F 3
0675 / 0680 / 0690 Order matrix for pressure transmitters in Oil-Filled Housing ype Pressure range Pressure connection Seal material Electrical connection 0.5 4.5 V, ratiometric 0675 0 10 V, -wire 0680
More informationAdjustment range. Seal material. Pressure connection
0520 Order matrix for electronic pressure switches.3 Type Adjustment range Pressure connection Seal material lectrical connection Type lectronic pressure switch 0520 Adjustment range 1) for NO 0 145 psi
More informationElectronic Pressure Switches E.
E. Electronic Pressure Switches Electronic Pressure Switches E. 96 97 E E. Overview of electronic pressure switches Technical explanations Electronic pressure from page 100 Selection matrix A guide to
More informationPressure Transmitters
Transmitters Wetted parts are all made of stainless steel for high resistance to chemicals Stainless steel diaphragm welded with casing No seals and thus low leakage rate even with difficult gases High
More informationNC or NO, maximum operating voltage up to 42 V. Large selection of electrical plug-in types for quick attachment and reliable connection
M.1 Pressure switches hex 24 with integrated connector Large selection of electrical plug-in types for quick attachment and reliable connection High protection class (to IP67 or IP6K9K) Compact and rugged
More information0110 / 0112 / 0114 / 0116 / 0118 / 0122
00 / 02 / 04 / 06 / 08 / 022 Diaphragm pressure switches with integrated connector M. Setting ranges to up to 725 psi (50 bar) (higher settings refer to page 26) NC or NO, maximum voltage 42 V Zinc-plated
More informationPressure transmitters for heavy duty applications MBS 8200 and MBS 8250
Data sheet Pressure transmitters for heavy duty applications MBS 8200 and MBS 8250 MBS 8200 is a series of compact pressure transmitters developed to withstand the pressure pulsations and vibrations known
More informationPressure switch hex 27
Pressure switch Changeover switch with silver or gold contacts Easily adjustable switching point. Factory adjustable hysteresis (except type 0140/014. High overpressure safety and long life even under
More informationDiaphragm pressure switches up to 42 V with brass housing. Brass housing M3 screw terminal Overpressure safety up to 500 psi (35 bar) 1) Male thread
0167 Diaphragm pressure switches with brass housing Brass housing M3 screw terminal Overpressure safety up to 500 psi (35 bar) Adjustment range tolerance at room temperature Male thread NO : NC : 36 Screw
More information0190 / Tolerance in psi (bar) at room temperature. Adjustment range in psi (bar) psi. ± 2.90 psi. (± 0.2 bar) (0.3-1.
0190 / 0191 Diaphragm / piston pressure switches up to 24 V with gold contacts Zinc-plated steel (CrVI-free), with spade terminal Snap action with gold contacts Overpressure safety up to 1,450 / 4,350
More information1/4 BSPP. 500 psi / 35 bar) psi / 35 bar) 8 018X XXX 03 X XXX
0186 / 0187 Diaphragm / piston pressure switches up to 250 V with stainless steel housing M.4 Stainless steel housing (AISI 303 / 1.4305) Snap action with silver contacts Overpressure safety up to 4,350
More informationMBS 1200 and MBS 1250
Data sheet OEM Pressure Transmitters for heavy-duty applications MBS 1200 and MBS 1250 The compact OEM pressure transmitter programme is designed for use in severe hydraulic applications. The programme
More informationOEM Pressure Transmitters for heavy-duty applications Type MBS 1200 and MBS 1250
Data sheet OEM Pressure Transmitters for heavy-duty applications Type MBS 100 and MBS 150 The compact OEM pressure transmitter programme is designed for use in severe hydraulic applications. The programme
More informationPressure switches hex 24
Pressure switches Normally open or normally closed, maximum voltage 42 V Low-cost solution for mechanical pressure monitoring. Stable switching point even after long use and high load. Switching point
More informationMade of zinc-plated steel (CrVI-free) M3 screw terminal Overpressure safety up to 4,350 psi (300 bar) 1) Male thread
M.3 0166 Diaphragm pressure switches with M3 screw terminal Made of zinc-plated steel (CrVI-free) M3 screw terminal Overpressure safety up to 4,350 psi (300 bar) Adjustment range tolerance at room temperature
More informationPRESSURE MONITORING.
MONITORING PRESSURE MONITORING PRESSURE Pressure-control systems overview Technical explanations From page 8 Selection matrix Support for selection of suitable pressure switch Page 10 Pressure switches
More informationOEM Pressure transmitter for industrial applications Type MBS Technical brochure
OEM Pressure transmitter for industrial applications Type MBS 1200 Technical brochure Features Designed for use in severe industrial OEM applications For medium and ambient temperatures up to 125ºC All
More informationP r e s s u r e i S w i t c h e s V a c u u m i S w i t c h e s PressureiTransmitters
P r e s s u r e i M o n i t o r i n g P r e s s u r e i S w i t c h e s V a c u u m i S w i t c h e s PressureiTransmitters TRADITION AND INNOVATION From a mechanical workshop to an international industrial
More informationPressure transmitters for industrial applications Type MBS 4510
Pressure transmitters for industrial applications Type MBS 4510 Technical brochure Features Designed for use in severe industrial environments Enslosure and wetted parts of acid-resistant stainless steel
More informationElectronic Pressure Switch EDS 3000
Description: The EDS 3000 is a compact, electronic pressure switch with integral digital display. The unit can have one or two switching outputs, and there is the option of an additional analogue output
More informationPressure transmitter for industrial applications Type MBS 4510
MAKING MODERN LIVING POSSIBLE Data sheet Pressure transmitter for industrial applications Type MBS 4510 The high accuracy flush diaphragm pressure transmitter MBS 4510 is designed for use in non-uniform,
More informationPressure Transmitter for wind turbine applications MBS 8200 and MBS 8250
Data sheet Pressure Transmitter for wind turbine applications MBS 8200 and MBS 8250 MBS 8200 is a series of compact pressure transmitters developed to withstand the pressure pulsations and vibrations known
More informationPressure transmitters for heavy-duty applications MBS 2000 and MBS 2050
Data sheet Pressure transmitters for heavy-duty applications MBS 2000 and MBS 2050 The compact heavy duty pressure transmitters MBS 2000 and MBS 2050 are designed for use in hydraulic applications. MBS
More informationSPT- I / U PRESSURE TRANSMITTER for general applications
Fields of application Design Examples Hydraulics Air conditioning and heating Testing technology Industrial robots Process controlling Water technology Pneumatics Description The pressure transmitters
More informationTechnical Data Measuring principle Thin-film-on-steel Media temperature -40 C C
Electronic Pressure Switch Swiss based Trafag is a leading international supplier of high quality sensors and monitoring instruments for measurement of pressure and temperature. The Electronic Pressure
More informationP r e s s u r e i S w i t c h e s V a c u u m i S w i t c h e s PressureiTransmitters
P r e s s u r e i M o n i t o r i n g P r e s s u r e i S w i t c h e s V a c u u m i S w i t c h e s PressureiTransmitters TRADITION AND INNOVATION From a mechanical workshop to an international industrial
More informationOEM pressure transmitter with thin-film technology For mobile hydraulics Model MH-2
Electronic pressure measurement OEM pressure transmitter with thin-film technology For mobile hydraulics Model MH-2 WIKA data sheet PE 81.37 Applications Load monitoring Load moment limitation Hydraulic
More informationHigh temperature pressure transmitters for heavy-duty applications MBS 2200 and MBS 2250
Data sheet High temperature pressure transmitters for heavy-duty applications MBS 2200 and MBS 2250 The compact heavy duty pressure transmitter type MBS 2200 and MBS 2250 are designed for use in severe
More informationPressure measurement PP20H Fully welded hygienic pressure sensor with flush membrane
Product highlights All market typical hygienic connections available EHEDG & 3-A certified versions available Condensate-proof measuring cell IO-Link available Space-saving installations from DN 25 on
More informationJUMO MIDAS Pressure transmitter
Phone: +44 19 635533 Fax: +44 19 6356 Data Sheet 401001 Page 1/5 JUMO MIDAS Pressure transmitter Brief description Pressure transmitters are used for measuring the relative (gauge) pressure in liquids
More informationPRESSURE TRANSDUCERS. Specifications. Individual Specifications
GEMS COMPLIANT 00 Series and 00 Heavy Duty Series Compact OEM Pressure Transmitters 0 00 psi to 0-0,000 psi ranges (0- bar to 0-,00 bar) High Proof Pressures Broad Choice of Outputs RoHS Compliant For
More informationPressure transmitter for industrial applications Type MBS 4500
MAKING MODERN LIVING POSSIBLE Data sheet Pressure transmitter for industrial applications Type MBS 4500 The high accuracy pressure transmitter MBS 4500 is designed for use in almost all industrial applications,
More informationPRESSURE TRANSDUCERS. Specifications. Individual Specifications
00 Series and 00 Heavy Duty Series Compact OEM Pressure Transmitters 0 50 psi to 0-0,000 psi ranges (0-.5 bar to 0-,00 bar) High Proof Pressures Broad Choice of Outputs RoHS Compliant For OEMs that need
More informationOperating Instruction for Electronic Pressure Switch. Model: PDD
Operating Instruction for Electronic Pressure Switch Model: PDD 1. Contents 1. Contents... 2 2. Note... 3 3. Instrument Inspection... 3 4. Regulation Use... 3 5. Operating Principle... 4 6. Mechanical
More informationPressure transmitters for heavy duty applications MBS 3200 and 3250
Data sheet Pressure transmitters for heavy duty applications MBS 3200 and 3250 The compact high temperature pressure transmitter MBS 3200 is designed for use in hydraulic and almost all industrial applications,
More informationElectronic pressure switch with integrated analogue output
Electronic pressure switch with integrated analogue output RE 30276/03.1 Replaces: 03.06 RE 30275 1/6 Type HEDE 10 /1/ Component series 2X tb0002 Table of contents Contents Page Features 1 Ordering code
More informationSolid State Electronic Pressure Switch with Integral LED Display Model PSD-10
Solid State Electronic Pressure Switch with Integral LED Display Model PSD-10 Electronic Pressure Measurement WIKA Datasheet PSD-10 Applications Hydraulics and pneumatics Filter monitoring Pump control
More informationMax. oil content of compressed air Shock resistance max. (XYZ direction) Vibration resistance (XYZ direction) Quiescent current consumption
Sensor technologies Pressure sensors Operating pressure: - - 2 bar electronic Output signal digital: 2 outputs - output IO-Link electr. connection: Plug, M2x, 4-pin 233 Certificates Measurement Display
More informationMax. oil content of compressed air Shock resistance max. (XYZ direction) Vibration resistance (XYZ direction) Quiescent current consumption
Operating pressure: -4.5-74 psi electronic Output signal digital: 2 outputs - output IO-Link electr. connection: Plug, M2x, 4-pin 233 Certificates Measurement Display Units displayed Switching logic Ambient
More informationJUMO MIDAS S05 Pressure transmitter Type
Data Sheet 40.00 Page /8 JUMO MIDAS S05 Pressure transmitter Type 4000 Brief description The JUMO MIDAS S05 pressure transmitter is available with both relative pressure and absolute pressure measurement
More informationPressure transmitter for marine applications MBS 33M
Data sheet Pressure transmitter for marine applications MBS 33M The standard pressure transmitter MBS 33M is designed for use in almost all marine applications, and offers a reliable pressure measurement,
More informationElectronic pressure switch with two switching outputs
Electronic pressure switch with two switching outputs RE 30278/04.14 Replaces: 03.06 RE 30275 1/6 Type HEDE 10 /2/ Component series 2X tb0002 Table of contents Contents Page Features 1 Ordering code 2
More informationECT Applications. Features
Industrial Pressure Transmitter Swiss based Trafag is a leading international supplier of high quality sensors and monitoring instruments for measurement of pressure and temperature. The economical pressure
More informationMarine Pressure ECTN Applications. Features
Marine Pressure Transmitter Swiss based Trafag is a leading international supplier of high quality sensors and monitoring instruments for measurement of and temperature. The economic transmitter is based
More informationABB Instrumentation. 50T Series Transmitters Model 54G/A gauge/absolute pressure transmitter for sanitary use. Specification sheet
Specification sheet 50T Series Transmitters Model 54G/A gauge/absolute pressure transmitter for sanitary use Ranges : - 100 to 4000 kpa - 1 to 40 bar - 14.5 to 600 psi Base accuracy : 0.2%(BFSL) Piezoresistive
More informationType A-10 General Purpose Pressure Transmitters
Type A-10 General Purpose Pressure Transmitters Applications Mechanical engineering Machine tools Process control and automation Hydraulics and pneumatics Pumps and compressors Special Features Pressure
More informationPressure transmitter for general industrial purposes MBS 3000 and MBS 3050
Data sheet Pressure transmitter for general industrial purposes MBS 3000 and MBS 3050 The compact pressure transmitter, type MBS 3000, is designed for use in almost all industrial applications, and offers
More informationPressure Transmitter. Pressure transmitter with compact design Model EDC-K. Electronic. Applications. Special Features.
Pressure transmitter with compact design Electronic Pressure Transmitter Applications Mechanical engineering Machine tools Control and feedback control systems Hydraulics / Pneumatics Pumps/ Compressors
More informationFPT Applications. Features
FPT 85 Flush Membrane Transmitter Swiss based Trafag is a leading international supplier of high quality sensors and monitoring instruments for measurement of and temperature. The Flush Membrane Transmitter
More informationPressure transmitters for heavy duty applications Type MBS 3250
Pressure transmitters for heavy duty applications Type MBS 3250 Features Designed for use in harsh industrial environments For medium and ambient temperatures up to 125 C With integrated pulse-snubber.
More informationPressure transmitter for general industrial purposes Type MBS 3000 and MBS 3050
MAKING MODERN LIVING POSSIBLE Data sheet Pressure transmitter for general industrial purposes Type MBS 3000 and MBS 3050 The compact pressure transmitter, type MBS 3000, is designed for use in almost all
More informationPressure transmitter for general purpose Type MBS 1700 and MBS 1750
MAKING MODERN LIVING POSSIBLE Data sheet Pressure transmitter for general purpose Type MBS 1700 and MBS 1750 The compact pressure transmitters MBS 1700 and MBS 1750 are designed for use as a general purpose
More informationINSERTION flow sensor for continuous flow measurement
INSERTION flow sensor for continuous flow measurement Economic integration in pipe systems without any additional piping 3-wire frequency pulse version to directly interface with PLC s (both PNP and NPN)
More informationTemperature switch. Switching output 2 transistors PNP Logger Ring buffer: 3518 data points Sampling time: s, Off (0)
Temperature switch Swiss based Trafag is a leading international supplier of high quality sensors and monitoring instruments for measurement of pressure and temperature. Applications Machine tools Hydraulic
More informationIntrinsically safe presure transmitters for hazardous environments Type MBS 4201, MBS 4251, MBS 4701 and MBS Technical brochure
Intrinsically safe presure transmitters for hazardous environments Type MBS 4201, MBS 4251, MBS 4701 and MBS 4751 Technical brochure Features Ex ll 1G EEx ia llc T4 - T6 in compliance with ATEX 100a Applicable
More informationElectronic Temperature Sensor ETS 300
Description: The ETS 300 is a compact electronic temperature sensor with digital display. Two different models are available for optimum adaptation to particular applications. The ETS 300 with built-in
More informationPilot-Operated Proportional DC Valve Series D*1FH
Characteristics The pilot-operated proportional DC valves series of the D*1FH series are high-performance valves with electronic spool position feedback. These valves are available in sizes NG10 to NG2
More informationTechnical explanations for mechanical pressure switches
Technical explanations for mechanical pressure switches 7 6 5 4 7 5 6 4 Diaphragm pressure switch NO Piston pressure switch NC Change over 3 2a 1 3 2b 10 9 What is a mechanical pressure switch? Mechanical
More informationOEM Pressure Transmitters
OEM Pressure Transmitters Type MH-2 Applications Mobile hydraulic systems Automotive industry Compressor systems Special Features Pressure ranges from 1000 psi to 8000 psi 4-20 ma, 1-5V, 0-10V, 0.5-4.5V
More informationM5200 Industrial Pressure Transducer
SPECIFICATIONS Wide Temperature Range Compact Variety of Pressure Ports and Electrical Configurations Optional Stainless Steel Snubber CE Compliant and Weatherproof Gage, Sealed, Compound The pressure
More informationPressure transmitter for air and water applications Type MBS 1900
Data sheet Pressure transmitter for air and water applications Type MBS 1900 The pressure transmitter MBS 1900 is designed for use in air and water applications like Booster Pumps and Air Compressors.
More information2-Color Display Digital Pressure Switch. Rated Pressure Metal Body Type. MPa MPa (ISE75H) 2-color digital. Functions
-Color Display Digital Pressure Switch /75/75H Series NPN/PNP open collector outputs added. Zero-cut off display function added. For General Fluids For Air Rated Pressure Metal Body Type 0 5 (E75) () -Color
More informationDMP 333. Industrial Pressure Transmitter For High Pressure. Stainless Steel Sensor
DMP Industrial Pressure Transmitter For High Pressure Stainless Steel Sensor accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 / 0. % FSO Nominal pressure from 0... 00 bar up to 0... 600
More informationEPI Applications. Features
EPI 887 Industrial Pressure Transmitter Swiss based Trafag is a leading international supplier of high quality sensors and monitoring instruments for measurement of pressure and temperature. The industrial
More informationPaddle-wheel flow controller for On/Off control
Paddle-wheel flow controller for On/Off control Type 8032 can be combined with... Indication, monitoring, transmitting and On/Off control in one device Programmable outputs (transistor or relay) Automatic-calibration:
More informationData Sheet P4055 Pressure Transducer
Data Sheet P4055 Pressure Transducer Main Features Pressure Ranges Electrical Connection Pressure Connection Housing Material Output Signal 0 to 3 up to 0 to 300 PSI Packard Electric Metri-Pack 150 Series
More informationPRESSURE BENCH OPERATING INSTRUCTIONS
PRESSURE BENCH OPERATING INSTRUCTIONS Overview: The pressure bench system allows the user to apply a variety of calibrated pressures to a variety of high and low pressure transducers. In addition the system
More informationIndustrial Pressure Transmitter
ECT 0. % (0. %,.0 %) 87 Industrial Transmitter Swiss based Trafag is a leading international supplier of high quality sensors and monitoring instruments for measurement of and temperature. The economic
More informationCTE9000 / CTU9000 Series OEM pressure transmitters for industrial media
FEATURES mbar to 35 bar, 15 to 500 psi gage 1 or absolute 10 pressure 05, 010, 0545, 16 or 420 ma output Field interchangeable All welded stainless steel diaphragm construction EMC according to EN 61326-1
More informationPX409 Series. mv/v, 0 to 5 or 0 to 10 Vdc, or 4 to 20 ma Outputs Uni-Directional Ranges 0-10 inh2o to psid
Micro-Machined Silicon Transducers wet/dry differential mv/v, 0 to 5 or 0 to 10 Vdc, or 4 to 20 ma Outputs Uni-Directional Ranges 0-10 inh2o to 0-1000 psid PX409 Series Standard U 5-Point NIST Traceable
More informationType A-10 General Purpose Pressure Transmitter
General Purpose TRONIC > General Purpose > A-10 Type A-10 General Purpose Pressure Transmitter Standard Features Signal output: 4-20 ma 2-wire or 0-10 V 3-wire Supply voltage: 8-30 DC (14-30 VDC) Process
More informationPressure transducer DMU 01K Compact version
Pressure transducer DMU 01K Compact version Dimensions (in mm) Wiring diagram 8 Application Special OEM unit. For electronic pressure measurement in industrial or HVAC applications (such as hydraulic,
More informationPressure Sensor - EPT3100
Pressure Sensor - EPT3100 Up to 4000 Bar pressure range High strength, rugged stainless steel design Competitively priced The EPT3100 is a high quality all stainless steel pressure transducer, intended
More informationElectronic pressure switch. Type HEDE 10. Contents. Features. RE Edition: Replaces:
Electronic pressure switch Type HEDE 10 RE 30277 Edition: 2017-02 Replaces: 2016-06 Component series 3X Maximum operating pressure 600 bar Features Suitable for measuring pressures in hydraulic systems
More informationDMK 331P. Industrial Pressure Transmitter. Pressure Ports With Flush Welded Stainless Steel Diaphragm
Industrial Pressure Transmitter Pressure Ports With Flush Welded Stainless Steel Diaphragm accuracy according to IEC 60770: 0.5 % FSO Nominal pressure from 0... 60 bar up to 0... 400 bar Output signals
More informationXMLR400M1N26 Pressure sensors XMLR 400bar - 1/4" 18 NPT - 24VDC ma - NPN - M12
Characteristics Pressure sensors XMLR 400bar - 1/4" 18 NPT - 24VDC - 4..20 ma - NPN - M12 Main Range of product Product or component type Pressure sensor type Pressure switch type of operation Device short
More informationXMLR400M1N75 Pressure sensors XMLR 400bar - G 1/4-24VDC V - NPN - M12
Characteristics Pressure sensors XMLR 400bar - G 1/4-24VDC - 0..10 V - NPN - M12 Main Range of product Product or component type Pressure sensor type Pressure switch type of operation Device short name
More informationBeck. The differential pressure transmitter for air with IP65
Beck. The differential pressure transmitter for air with IP65 Differential pressure transmitter 985 with IP65 General description The differential pressure transmitters of the 985 series are used to measure
More informationOperating Instructions for Pressure Transmitter with Digital Display. Model: PDA
Operating Instructions for Pressure Transmitter with Digital Display Model: PDA 1. Contents 1. Contents... 2 2. Note... 3 3. Instrument Inspection... 3 4. Operating Principle... 3 5. Regulation Use...
More informationPaddle-wheel flow controller with optical principle for On/Off control
Paddle-wheel flow controller with optical principle for On/Off control Type 8039 can be combined with... Indication, monitoring, transmitting and On/Off control in one device. Programmable s (transistor
More informationPaddle-wheel flow controller for On/Off control
Paddle-wheel flow controller for On/Off control Type 803 can be combined with... Indication, monitoring, transmitting and On/Off control in one device Programmable s (transistor or relay) Automatic-calibration:
More informationXMLRM01G1P25 Pressure sensors XMLR -1 bar - G 1/4-24VDC ma - PNP - M12
Characteristics Pressure sensors XMLR -1 bar - G 1/4-24VDC - 4..20 ma - PNP - M12 Complementary Current consumption Electrical connection Type of output signal Analogue output function Discrete output
More informationThermal hysteresis 0.5% max. of full scale (within compensated temperature range) 1% max. for ranges mbar mbar mbar
Pressure Transmitter Type FM40466 General application Pressure transmitters are used to measure the relative (gauge) and absolute pressures in liquids or gases. The measuring device for the transmitter
More informationDiaphragm/piston pressure switches 250 V
0186/ 0187 Diaphragm/piston pressure switches 250 V www.suco.de Stainless steel (1.4305) body With changeover switch and silver contacts Max. voltage 250 V, overpressure safe to 300/600 bar *) See page
More informationOEM Pressure Transmitters
OEM Pressure Transmitters Type ECO-1 Applications Hydraulics and pneumatics Mechanical engineering General industrial applications Special Features Pressure ranges from 0-15psi to 0...15,000psi 4-20 ma
More informationPressure transmitter for marine applications MBS 3100 and MBS 3150
Data sheet Pressure transmitter for marine applications MBS 3100 and MBS 3150 The compact ship approved pressure transmitters MBS 3100 and MBS 3150 are designed for use in almost all marine applications.
More informationExplosion-Protected Pressure Switches
Explosion-Protected Pressure Switches To new ATEX Standard TECHNICAL DATA 0165 0340 0341 Degree of protection: IP 65 ATEX protection zone: 1 22 22 Switching power: 1 A / 250 VAC 0.25 A / 250 VDC 2 A /
More informationG 1/4 A DIN 3852 (bar version) ±0.5 %FS max
Pressure Transducers HDA 00 & 700 About HDA 00 & 700 Pressure Transducers: Series HDA 000 transducers are compact, heavy-duty, pressure instruments designed for both OEM industrial and off-road applications
More informationMicro-Machined Silicon Transducers
Micro-Machined Silicon Transducers wet/wet differential Pressure Models mv/v, 0 to 5 or 0 to 10 Vdc, or 4 to 20 ma Outputs Uni-Directional Ranges 0-10 inh2o to 0-1000 psid PX409 Series Standard U Precision
More informationOBSOLETE. Data Sheet P1E Oxygen Service Pressure Sensor. Main Features. Typical Applications. Attributes. Description
Data Sheet P1E Oxygen Service Pressure Sensor Main Features Pressure Ranges Electrical Connection Pressure Connection 6 bar up to 400 bar (gage)* M12-4 Pole, 18mm connector, 9.4mm connector* G1/4A DIN
More informationMicro-differential Pressure High-precision Digital Pressure Sensor For Gas DP-M SERIES
MODE 729 Micro-differential Pressure High-precision Digital Pressure Sensor For Gas SERIES Related Information General terms and conditions... F-3 Glossary of terms... P.1563~ guide... P.699~ General precautions...
More informationSSI Technologies Application Note PS-AN7 MediaGauge (Model MG-MD) Digital Pressure Gauge Product Overview
Product Description The MediaGauge MG-MD is a multi-functional digital pressure gauge consisting of a media isolated piezoresistive pressure sensing element, signal conditioning circuitry for temperature
More informationIndustrial Pressure Transmitters
Industrial Pressure Transmitters Type S-10, S-11 Applications Hydraulics and pneumatics Test equipment Pump and compressor control Liquid level measurement Special Features Standard ranges available from
More informationAssembly. 1 Compact version with valve plug 2 Short tube version with cable 3 Compact version with M12 plug 4 Short tube version with M12 plug
Vibration Limit Switch Features Limit switch for liquids External function test with test magnet Onsite function check possible thanks to LED indication Large selection of process connections for hassle-free
More informationPressure Switches 30 A/F
CE Marking Directives of the European Council Machinery Directive EMC Directive Low Voltage Directive Pressure Switches 30 A/F Changeover switch Equipment that falls under these directives must have a
More informationJUMO dtrans p35. Pressure Sensor with IO-Link. Application. Brief description. Customer benefits. Special features
sales@jumo.co.uk info.us@jumo.net Page 1/10 JUMO dtrns p5 Pressure Sensor with IO-Link pplication Process automation Machines for the food and beverage industry General mechanical and apparatus engineering
More informationSSI Technologies Application Note PS-AN2 MediaSensor Absolute & Gage Pressure Transducers & Transmitters Product Overview
Product Description The MediaSensor (P51) family of bulk micro-machined, absolute, gage and sealed pressure transducers and transmitters are for both harsh and benign media with the superior typical accuracy
More information