Premise Networks Division Product & Applications Guide Americas

Transcription

1 Premise Networks Division Product & Applications Guide Americas

2 Table of Contents Section Title Brands Performance Level Product Families A Copper Solutions UTP/FTP PowerCat TM Category 6 Enhanced Category 5 Cable Patch Panels Patch Cords Work Area Jacks B MOD & Multimedia Solutions Category 3 Patch Panels C PDS Solutions UTP 110 Category 6 Enhanced Category 5 Connectors Termination Blocks Rack Mount Panels Patch Cords Frame & Accessory Kits D E Optical Fiber Solutions Free Space Optics 6-Pak Demarc Lightband TM ModLink TM Xpress Xpress-Lock TM Canobeam TM* OM1 (62.5/125µm) OM2 (50/125µm) OM3 (50/125µm) OS1 (9/125µm) Category 6 Enhanced Category 5 OM1 (62.5/125µm) OM2 (50/125µm) OM3 (50/125µm) OS1 (9/125µm) Cable, Pre-Terminated Leads Patch Cords, Oven Cure Connectors Field Terminable Connectors Adapters, Fiber Management Systems Termination Kits, Fiber-to-the-Desk Modules F Industrial Solutions PowerCat Enhanced Category 5 OM1 (62.5/125µm) OM2 (50/125µm) OM3 (50/125µm) OS1 (9/125µm) Connectors Patch Cords Wallplates G H Work Area Solutions Cable Management Solutions MUTO USP WM-12 Category 6 Streamline TM Enhanced Category 5 Synergy TM USO II TM Category 6 Enhanced Category 5 OM1 (62.5/125µm) Omega Rack OM2 (50/125µm) OM3 (50/125µm) OS1 (9/125µm) Unloaded Wallplates Unloaded Surface Blocks Keystone Profile Jacks & Wallplate System 25 x 50mm Modules & Wallplate System 25 x 38.5mm Modules & Wallplate System Ring Run Panels Management Rings Open Bay Racks I Tools & Testers SLT3 TM Xpress Termination Tools Testers Fiber Termination Tool Kits J Order No. Reference 110 is a registered trademark of AT&T Canobeam is a registered trademark of Canon Contura, DataGate, Euromod, MOD-Clip, KATT, ModLink, MOD-SNAP, PowerCat, RealTime, Signature, SLT3, Snapz, Streamline, Synergy, Universal Patching Frame, USO II and Xpress-Lock are trademarks of Molex Incorporated ST, LC and STII, ESCON, MT-RJ & MTP are registered trademark of Lucent Technologies, International Business Machines Corporation, AMP Technologies and US Conec Ltd respectively.

3 About Molex For over 30 years the Premise Networks Division of Molex has manufactured comprehensive UTP, FTP and Optical Fiber cabling systems for the transmission of voice, data and video imaging signals. As one of the original pioneers of structured cabling we have provided state-of-the-art cabling solutions to some of the largest organizations in the world.

4 Whether you require one product or a total end-to-end solution, Molex is committed to assisting you in making the right choice for your business requirements. Our team of technical experts will provide you with a true and honest assessment of your business requirements and design a customized system to support your business today, while providing the necessary performance to future proof your requirements for tomorrow. By choosing Molex you can be safe in the knowledge that whatever the project, our goal to is to ensure that your transfer to a new system runs as smoothly as possible. We work closely with our installation partners to maintain the same high standards, regardless of the complexity or simplicity of the project. This commitment to our customers is reflected in our 25 year system performance warranty and the ongoing support we provide to our business partners. In recognition of the impact Molex has had on the size, shape and character of the electronics industry as a whole, Electronic Business named Molex one of its 10 most significant companies in the past 30 years.

5 About Molex Molex engineering design groups employ the latest tools, systems and technology to develop products that anticipate changing customer demands and industry trends. Our integrated approach to product development involves both our customers and Molex experts in R&D, sales, marketing and design engineering. Molex received more than 606 patents in We operate product design centers in 25 locations in 16 countries. To accelerate time to market, our more than 1,000 electrical, mechanical and process engineers draw on a global database to share designs and test results across borders and industries. We use our extensive process and materials laboratories to research new technologies and our reliability labs to assure product performance. Computer Aided Engineering software and predictive engineering tools facilitate rapid prototyping and evaluation of new concepts. We also use 3D solid models to design our products and production tools. The result: high quality products developed, manufactured and delivered in ever-decreasing time to market. Whether you require one product or a total end-to-end solution, we are poised to deliver what you need, when you need it. Each year, Molex invests millions of dollars in expanded facilities, the latest equipment, new tooling and processes to make measurable improvements in the quality and competitiveness of our products. Molex is on the leading edge of technology for the industries we serve, from developing the world s smallest connectors for more portable consumer electronics devices to the application of plated plastics for high-speed signaling applications. We operate 58 manufacturing facilities in 19 countries and have major valueadded centers in every region of the world. We continually update our core molding, stamping, plating and assembly processes. Many of our plants use computer-integrated manufacturing and capitalize on the latest innovations from vision systems to in-process mold monitoring to ultra-high-speed manufacturing processes and integrated work cells.

6 With over 100 offices on six continents, Molex has the resources to quickly respond to the needs of customers around the corner and around the world. developing and manufacturing world-class products

7 A Copper Solutions PowerCat 10G Shielded Molex s PowerCat 10G Shielded system product range PowerCat 10G is specifically designed to support 10GBASE-T applications. This system offers superior alien crosstalk suppression, excellent insertion loss and provides enhanced electromagnetic interference (EMI) protection. The key components of this end to end system are shielded patch panels, shielded patch cords, CAT6A shielded cable and DataGate PowerCat 10G F/UTP Cable Supports ultra high speed data networks such as 10-Gigabit Ethernet (10GBASE-T) and beyond Overall diameter of.28 Ideal for environments that demand high bandwidth such as Data Centers, healthcare and financial institutions Single foil shield allows fast termination 10G shielded jacks which are fully enclosed by a two piece tin nickel plated brass housing. The Molex PowerCat 10G system has been independently tested and verified by Intertek ETL Semko for Augmented Category 6 channel compliance, 4 connector configuration, to the TIA/EIA-568-B.2-10 and ISO 11801;2002 Amendment 1 for Class EA cabling standards Foil shield provides enhanced EMI protection and provides superior alien crosstalk suppression 1000 to 0 foot markers Packaged in 1000 foot reels UL listed and verified RoHS compliant CAA-0320P PowerCat 10G F/UTP Cable, Plenum White CAA-0320P PowerCat 10G F/UTP Cable, Plenum Gray CAA-0320P-BL PowerCat 10G F/UTP Cable, Plenum Blue CAA-0320R PowerCat 10G F/UTP Cable, Riser White CAA-0320R PowerCat 10G F/UTP Cable, Riser Gray CAA-0320R-BL PowerCat 10G F/UTP Cable, Riser Blue Note: Standard Lengths: 1,000 feet (305 meters). Specifications subject to change without notice. Part numbers listed are for reels. PowerCat 10G Shielded Patch Panels PowerCat 10G Shielded Patch Panels are the premier Molex patch panel product line. A key product used in 10G BASE-T applications. This patch panel features the shuttered shielded DataGate 10G connector which is dual color coded for either 568A or 568B wiring. The IDC section consists of V-shaped contacts that flex not fatigue when terminated. Each port features a patented spring-loaded shutter, can be color coded with icons to match jack outlet and provides both front and rear labelling options. RoHS compliant Each port features the patented spring-loaded shutter: prevents incomplete mating protects from dust and contaminants 24 Ports 1U in straight and angled versions EIA 568A/B wired Standard 19 rack mount IDC contacts that flex not fatigue when terminated Pointed IDC towers to speed termination and enhance cable retention Individually removable patch panel ports Integral cable management shelf ensures bend radius compliance 360 shielded shuttered DataGate 10G component compliant connector PID Port PowerCat 10G Shielded Patch Panel, 1U with cable management PID Port PowerCat 10G Shielded Angled Patch Panel, 1U with cable management **Note: Icons for the Patch Panels are listed with the Jacks A-1

8 Copper Solutions PowerCat 10G Shielded PowerCat 10G Shielded Patch Cords Molex s PowerCat 10G Shielded patch cords are manufactured using high quality shielded four pair Category 6 stranded cable. Available in a range of colors and lengths, PowerCat 10G Shielded patch cords are pre-terminated with RJ45 shielded plugs and feature cable strain relief boots with a plug latch protection cap. Suitable for high-speed data transmission, PowerCat 10G Shielded patch cords have been designed to exceed the highest electrical performance standards in the industry. PCD ** # Patch Cord Cat 10G Shielded 568A/B, 0.5m PCD ** # Patch Cord Cat 10G Shielded 568A/B, 1m PCD ** # Patch Cord Cat 10G Shielded 568A/B, 2m PCD ** # Patch Cord Cat 10G Shielded 568A/B, 3m PCD ** # Patch Cord Cat 10G Shielded 568A/B, 5m PCD ** # Patch Cord Cat 10G Shielded 568A/B, 7m * See Index for SAP Number ** Color Options - 0E = Light Grey, 0C = Red, 0H = Blue, Additional colors and lengths are available upon request Over-molded strain relief boots Suitable for EIA 568A/B wiring applications 10G Channel performance when installed as an end-to-end PowerCat 10G system. PVC sheath RoHS compliant A PowerCat 10G Shielded Jacks The PowerCat 10G Shielded Jacks offers enhanced EMI protection and improved Alien Crosstalk suppression, providing 360 shuttered shielded protection using a two piece tin/nickel plated brass can that encloses the RJ-45 IDC. The RJ-45 DataGate jack features a patented spring-loaded shutter which protects it from dust and contaminants as well as provides tactile feedback the spring-loaded shutter pops out an improperly seated patch cord all with single-handed plug-in and removal. Each port features the patented spring-loaded shutter: prevents incomplete mating protects from dust and contaminants IDC contacts that flex not fatigue when terminated Pointed IDC towers to speed termination and enhance cable retention 568 A/B wiring configuration Allows rear and side entry cable termination Designed for use with Molex s Synergy, Streamline, & USO II system of wallplates and surface blocks - See Section G RoHS compliant KSJ PowerCat 10G Shielded Jack, RJ45, 568A/B, Black Shutter Accessories CSP ** # Blank 6-Pack Icons (Bag of 10) CSP ** # Data 6-Pack Icons (Bag of 10) CSP ** # Voice 6-Pack Icons (Bag of 10) ** Color Options - 02 = White, RD = Red, BL = Blue; other colors available upon request. # See Index for SAP numbers. A-2

9 A Copper Solutions PowerCat HP6 UTP Molex s PowerCat HP6 (High Performance) Cat 6 UTP Solution is a premium Category 6 end-to-end UTP System Solution, designed to offer optimum channel performance with significant headroom over and above the Category 6 standard, while still compliant in every way. With a minimum of 5dB additional crosstalk and 4dB return loss. This system offers the enhanced performance needed for PowerCat HP6 500 UTP Cable The Molex Premise Networks PowerCat UTP Cable is a key component of a PowerCat HP6 end to end Category 6 system. Molex PowerCat HP6 500 Cable is a premium Category 6 cabling solution designed for Gigabit Ethernet support, swept to 500MHz. When used in configuration with the rest of the PowerCat HP6 end to end system, Molex Provides a 25 year system warranty. bandwidth hungry applications. With the pace of business in today s environment, organizations are demanding more and more of their Network Infrastructure. Higher transmission rates, more throughput, larger data packets. All of this requires greater bandwidth from the system. Specified and tested to 500 MHz ETL verified to ANSI/TIA/EIA-568-B.2-1 Category 6 standard Electrical performance characteristics, including balance, guaranteed across entire frequency range 1000 foot to 0 foot markers Robust box design minimizes tangles during installation RoHS compliant CAA-0181P PowerCat Pair Cable, Plenum White CAA-0181P PowerCat Pair Cable, Plenum, Light Gray CAA-0181P-BL PowerCat Pair Cable, Plenum, Blue CAA-0181R PowerCat Pair Cable, Riser, White CAA-0181R PowerCat Pair Cable, Riser, Light Gray CAA-0181R-BL PowerCat Pair Cable, Riser, Blue Note: Standard Lengths: 1,000 feet (305 meters). Specifications subject to change without notice. Part numbers listed are for boxes. PowerCat 6 Enhanced UTP Cable Molex PowerCat Enhanced Category 6 Cable is the highest performing Category 6 UTP cable in the industry, supporting video, voice over IP, and the next generation of networking applications Increased usable bandwidth vs. the Category 6 standard Documented balance characteristics (LCL/TCL/EL TCTL) Reduced Insertion Loss (attenuation) Specified and tested to 500 MHz Available in white, blue and light gray sheaths for application versatility Highest performing UTP cable available RoHS compliant CAA-0183P PowerCat 6 Enhanced 4 Pair Cable, Plenum, White CAA-0183P PowerCat 6 Enhanced 4 Pair Cable, Plenum, Light Gray CAA-0183P-BL PowerCat 6 Enhanced 4 Pair Cable, Plenum, Blue CAA-0183R PowerCat 6 Enhanced 4 Pair Cable, Riser, White CAA-0183R PowerCat 6 Enhanced 4 Pair Cable, Riser, Light Gray CAA-0183R-BL PowerCat 6 Enhanced 4 Pair Cable, Riser, Blue Note: Standard Lengths: 1,000 feet (305 meters). Specifications subject to change without notice. Part numbers listed are for boxes. PowerCat HP6 Angled Patch Panels The Molex Premise Networks PowerCat HP6 angled patch panels are components of the PowerCat HP6 system. A key product used in both Category 6 link and channel Gigabit Ethernet applications. The angled feature provides enhanced port access and minimizes patch cord bend radius to the rack. Offering both front and rear labeling options, the patch panel is constructed of cold-rolled steel for additional strength and durability. Each port features the patented spring-loaded shutter: prevents incomplete mating protects from dust and contaminants Individually removable patch panel ports Shuttered Datagate RJ45 RoHS compliant PID-00202G Port PowerCat HP6 Angled Patch Panel, 568A/B, 1U Gray PID-00203G Port PowerCat HP6 Angled Patch Panel, 568A/B, 2U Gray A-3

10 A Copper Solutions PowerCat HP6 UTP PowerCat HP6 Patch Panel The Molex Premise Networks PowerCat HP6 patch panels are key components of a PowerCat HP6 end to end Category 6 system. A key product used in both Category 6 link and channel Gigabit Ethernet applications. The IDC section consists of V-shaped contacts that flex not fatigue when terminated. Each port features a patented spring -loaded shutter and can be color coded to match jack outlets. Offering both front and rear labeling options, the patch panel is constructed of cold rolled steel for additional strength and durability. Available in 1U 24 Port and 2U 48 Port density Each port features the patented spring-loaded shutter prevents incomplete mating protects from dust and contaminants Individually removable patch panel ports Shuttered Datagate RJ45 PID-00200G Port PowerCat HP6 Patch Panel, 568A/B, 1U with cable management Gray PID-00201G Port PowerCat HP6 Patch Panel, 568A/B, 2U with cable management Gray **Note: Icons for the Patch Panels are listed with the Jacks PowerCat HP6 UTP Patch Cords 4-pair stranded cable Pre-terminated with 8-position RJ-45 Sleek, matched anti-snag overmolded feature Stable electrical performance achieved with discreet plug wire manager Available in a variety of internationally recognized RAL colors PCD ** # PowerCat HP6 Patch Cord, 568A/B, 1m PCD ** # PowerCat HP6 Patch Cord, 568A/B, 2m PCD ** # PowerCat HP6 Patch Cord, 568A/B, 3m PCD ** # PowerCat HP6 Patch Cord, 568A/B, 5m PCD ** # PowerCat HP6 Patch Cord, 568A/B, 10m 100% factory tested High performance when installed as a complete PowerCat HP6 system RoHS compliant Additional colors and cable lengths available upon request ** Color Options - BK = Black, OE = Light Grey, OC = Red, OH = Blue, OJ = Green, OK = Yellow, # See Index for SAP Number NOTE: Additional colors and lengths are available upon request. PowerCat HP6 DataGate Jack Patented spring-loaded shutter: prevents incomplete mating protects from dust and contaminants Dual color-coding allows for 568 A/B wiring configuration Patented IDC V-shaped contacts that flex not fatigue when terminated Features lead-in on IDC towers to speed termination and enhance cable retention Can be terminated using industry standard punch-down tools Molded category identification on jack face as well as optional port identification icons Available in 9 standard colors 100% factory tested High performance when installed as a complete PowerCat HP6 system RoHS compliant KSJ * # PowerCat HP6 DataGate Jack, 568A/B Accessories CSP ** # Blank 6-Pack Icons (Bag of 10) CSP ** # Data 6-Pack Icons (Bag of 10) CSP ** # Voice 6-Pack Icons (Bag of 10) * Jack Color Options - 01 = Almond, 02 = White, 04 = Black, 08 = Light Grey, RD = Red, BL = Blue, GR = Green, YL = Yellow, RG = Orange; ** Icon Color Options - 02 = White, RD = Red, BL = Blue Note: # See Index for SAP No. A-4

11 A Copper Solutions PowerCat 6 UTP Molex s Category 6 system product range PowerCat 6 is designed to comply with the Category 6 standards: TIA/EIA 568-B.2-1, ISO/IEC 11801:2002 and AS/NZS 3080:2002. The Molex Category 6 system is independently tested and verified by ETL Semko to ensure continuous compliance to channel performance criteria. PowerCat UTP Cable Supports ultra high speed data networks such as Gigabit Ethernet (1000 BASE-T/1000 BASE-TX) swept to 250MHz Full duplex operation capable over four cable pairs 1000 foot to 0 foot markers Supplied in convenient 1000 fit. (305m) Reel in a Box Specified and tested to 250MHz 23 AWG Conductors for improved Insertion Loss Performance Overall diameter of.20 Available in white, blue and light gray sheaths for application versatility UL listed and verified CAA-0195P PowerCat Pair Cable, Plenum, White CAA-0195P PowerCat Pair Cable, Plenum, Light Gray CAA-0195P-BL PowerCat Pair Cable, Plenum, Blue CAA-0195R PowerCat Pair Cable, Riser, White CAA-0195R PowerCat Pair Cable, Riser, Light Gray CAA-0195R-BL PowerCat Pair Cable, Riser, Blue Note: Standard Lengths: 1,000 feet (305 meters). Specifications subject to change without notice. Part numbers listed are for reel in a box. PowerCat UTP Cable Supports ultra high speed data networks such as Gigabit Ethernet (1000 BASE-T/1000 BASE-TX) and beyond Features innovative pair twisting to ensure optimum Return Loss and NEXT performance and maintains pair twist rate during installation Incorporates central spine maintaining pair separation during installation to ensure premium performance after installation CAA-0181P PowerCat Pair Cable, Plenum, White CAA-0181P PowerCat Pair Cable, Plenum, Light Gray CAA-0181P-BL PowerCat Pair Cable, Plenum, Blue CAA-0181R PowerCat Pair Cable, Riser, White CAA-0181R PowerCat Pair Cable, Riser, Light Gray CAA-0181P-BL PowerCat Pair Cable, Riser, Blue Note: Standard Lengths: 1,000 feet (305 meters). Specifications subject to change without notice. Part numbers listed are for reel in a box. Supplied in convenient 1000 fit. (305m) Reel in a Box UL Listed & Verified 23 AWG Conductors for improved Insertion Loss Performance Available in white, blue and light gray sheaths for application versatility PowerCat 6 Angled Patch Panels Angled Patch Panels are ideal for installations of high density or which utilize extensive side and end of the rack cable management. The angled feature provides enhanced port access and minimizes patch cord bend radius to the rack. Each DataGate RJ-45 port features a patented springloaded shutter, can be color coded with icons to match jack outlet and provides both front and rear labeling options. Each port features the patented spring-loaded shutter: prevents incomplete mating protects from dust and contaminants EIA 568A/B wired ETL Verified Standard 19 rack mount RJ-11 compatible Pointed IDC towers to speed termination and enhance cable retention Individually removable DataGate patch panel ports Integral cable management shelf ensures bend radius compliance PID Port PowerCat 6 Angled Patch Panel, 568A/B, 1U with cable management PID Port PowerCat 6 Angled Patch Panel, 568A/B, 2U with cable management A-5

12 A Copper Solutions PowerCat 6 UTP PowerCat 6 Patch Panels PowerCat 6 Patch Panels are the premier Molex patch panel product line. A key product used in both Category 6 link and channel applications. The IDC section consists of V-shaped contacts that flex not fatigue when terminated. The RJ-45 DataGate jack features a patented spring-loaded shutter, can be color coded with icons to match jack outlet and provides both front and rear labeling options. For icons refer to Jacks section 24 Ports 1U & 48 Port 2U density EIA 568A/B wired Each port features the patented spring-loaded shutter: prevents incomplete mating protects from dust and contaminants ETL Verified Standard 19 rack mount RJ-11 compatible Pointed IDC towers to speed termination and enhance cable retention Individually removable DataGate patch panel ports Integral cable management shelf ensures bend radius compliance PID Port PowerCat 6 Patch Panel, 568A/B, 1U with cable management PID Port PowerCat 6 Patch Panel, 568A/B, 2U with cable management 89D Category 6 12 Port Patch Panel The 89D Patch Panel is a 12 port Category 6 patch panel which is mounted into an 89D bracket. The patch panel is ideal for smaller applications, such as a branch or small office environment. A vertical configuration utilizes IDC terminations and printed circuit board. Once the bracket is mounted onto the wall, the patch panel can be snapped in for port access or in reverse for cable access. Plastic zip ties can be used for cable management. 12 port configuration Rear IDC technology Both 568A and 568B applicable Wall mountable Order No. SAP Material No. Description KPD Port Category 6 89D Patch Panel 568A/B A-6

13 Copper Solutions PowerCat 6 UTP A PowerCat 6 UTP Patch Cords Unshielded 4 pair stranded cable Slim Boot Design Suitable for high density active equipment with limited space between individual RJ-45 jacks Available in 6 colors to facilitate improved wiring closet manageability ETL Verified Suitable for EIA 568A/B applications Custom colors and lengths are available for custom applications PCD ** # PowerCat 6 Patch Cord, 568A/B, 1ft. PCD ** # PowerCat 6 Patch Cord, 568A/B, 3 ft. PCD ** # PowerCat 6 Patch Cord, 568A/B, 5 ft. PCD ** # PowerCat 6 Patch Cord, 568A/B, 7 ft. PCD ** # PowerCat 6 Patch Cord, 568A/B, 10 ft. PCD ** # PowerCat 6 Patch Cord, 568A/B, 15 ft. PCD ** # PowerCat 6 Patch Cord, 568A/B, 25 ft. ** Color Options - BK = Black (RAL 9017), OE = Grey (RAL 9002), OC = Red (RAL 3020), OH = Blue (RAL 5015), OJ = Green (RAL 6024), OK = Yellow (RAL 1023) Note: Additional colors and lengths available for upon request #See Index for SAP Number PowerCat 6 DataGate Jack The DataGate jack is designed to maintain clean secure connections. The RJ-45 jack features a patented springloaded shutter which protects it from dust and contaminants as well as provides tactile feedback the spring-loaded shutter pops out an improperly seated patch cord all with single-handed plug-in and removal. Available in ten colors the DataGate jack utilize patented IDC V-shaped contacts that flex not fatigue when terminated and provides molded category identification on jack face as well as optional port identification icons. KSJ PowerCat 6 DataGate Jack, 568A/B Almond color KSJ PowerCat 6 DataGate Jack, 568A/B White color KSJ PowerCat 6 DataGate Jack, 568A/B Black color KSJ PowerCat 6 DataGate Jack, 568A/B Ivory color KSJ PowerCat 6 DataGate Jack, 568A/B Gray color KSJ BL PowerCat 6 DataGate Jack, 568A/B Blue color KSJ GR PowerCat 6 DataGate Jack, 568A/B Green color KSJ RD PowerCat 6 DataGate Jack, 568A/B Red color KSJ RG PowerCat 6 DataGate Jack, 568A/B Orange color KSJ YL PowerCat 6 DataGate Jack, 568A/B Yellow color Accessories CSP ** # Blank 6-Pack Icons (Bag of 10) CSP ** # Data 6-Pack Icons (Bag of 10) CSP ** # Voice 6-Pack Icons (Bag of 10) ** Icon Color Options - 02 = White, RD = Red, BL = Blue; other colors available upon request. ETL Verified Each port features the patented spring-loaded shutter: prevents incomplete mating protects from dust and contaminants IDC contacts that flex not fatigue when terminated Pointed IDC towers to speed termination and enhance cable retention 568 A/B wiring configuration Allows rear and side entry cable termination Designed for use with Molex s Synergy, Streamline, & USO II system of wallplates and surface blocks - See Section G Designed for use with Molex s media configurable patch panels A-7

14 Copper Solutions PowerCat 5e UTP Molex s Category 5e product range PowerCat is designed to exceed the requirements of: TIA/EIA 568-B, ISO/IEC Class E (2002) Second Edition, AS/NZS 3080:2002. Molex provides all the components necessary for a complete end-to-end Enhanced Category 5 system. To ensure optimum performance Molex recommends the use of all of the PowerCat products, which are engineered to be matched to each other. PowerCat Category 5e-100 UTP Cable Molex Category 5e-100 cable is designed for horizontal network and voice applications in a structured cabling system. Specified and tested to 100 MHz ETL verified to TIA/EIA-568-B.2 and ISO/IEC foot to 0 foot markers A CAA-0184P PowerCat 5e Pair Cable, Plenum White CAA-0184P PowerCat 5e Pair Cable, Plenum Lt Gray CAA-0184P-BL PowerCat 5e Pair Cable, Plenum Blue CAA-0184R PowerCat 5e Pair Cable, Riser White CAA-0184R PowerCat 5e Pair Cable, Riser Lt Gray CAA-0184R-BL PowerCat 5e Pair Cable, Riser Blue Note: Standard Lengths: 1,000 feet (305 meters). Specifications subject to change without notice. Part numbers listed are for reel in a box. PowerCat Category 5E-350 UTP Cable Molex Category 5E-350 cable is a premium Category 5E solution ideal for supporting 100BASE-T Ethernet networks. Specified and tested to 350 MHz ETL verified to TIA/EIA-568-B.2 and ISO/IEC foot to 0 foot markers CAA-0182P PowerCat 5E Pair Cable, Plenum White CAA-0182P PowerCat 5E Pair Cable, Plenum Lt Gray CAA-0182P-BL PowerCat 5E Pair Cable, Plenum Blue CAA-0182R PowerCat 5E Pair Cable, Riser White CAA-0182R PowerCat 5E Pair Cable, Riser Lt Gray CAA-0182R-BL PowerCat 5E Pair Cable, Riser Blue Note: Standard Lengths: 1,000 feet (305 meters). Specifications subject to change without notice. Part numbers listed are for reel in a box. PowerCat 5e UTP Angled Patch Panels Angled patch panels are ideal for installations of high density or which utilize extensive side and end of the rack cable management. The angled feature provides enhanced port access and minimizes patch bend radius to the rack. Each port features a patented DataGate spring-loaded shutter and can be color coded to match jack outlets and provides both front and rear labeling options. 24 Ports 1U and 48 Ports 2U Features pointed IDC towers to speed termination and enhance cable retention Dual color coding allows EIA 568A/B wiring configuration Each port features the patented spring-loaded shutter: prevents incomplete mating protects from dust and contaminants Individually removable patch panel ports Supplied with ANSI and metric hardware kits RJ-11 compatible PID U 24 Port PowerCat 5e Angled Patch Panel, 568A/B, with Cable Management PID U 48 Port PowerCat 5e Angled Patch Panel, 568A/B, with Cable Management A-8

15 Copper Solutions PowerCat 5e UTP A PowerCat 5e UTP Patch Panels PowerCat 5e Patch Panels are the premier Molex patch panel product line. A key product used in both Category 5e link and channel applications. The IDC section consists of V-shaped contacts that flex not fatigue when terminated. Each port features a patented DataGate spring-loaded shutter, can be color coded with icons to match jack outlet and provides both front and rear labeling options. 24 Ports 1U & 48 Port 2U EIA 568A/B wired Standard 19 rack mount Each port features the patented spring-loaded shutter: prevents incomplete mating protects from dust and contaminants IDC contacts that flex not fatigue when terminated Pointed IDC towers to speed termination and enhance cable retention Individually removable patch panel ports Integral cable management shelf ensures bend radius compliance PID Port PowerCat Patch Panel, 568A/B with Cable Management, 1U PID Port PowerCat Patch Panel, 568A/B with Cable Management, 2U **Note: Icons for the Patch Panels are listed with the Jacks PowerCat 5e 1U 48 Port UTP Patch Panel The 1U Port PowerCat 5e Patch Panel is ideal for ISP applications or installations where cabinet/rack space is at a premium. Providing 48 ports in 1U, these patch panels offer an integral rear cable management tray specifically designed for neat and easy cable dressing. Suitable for high speed data transmission, this panel meets the highest performance standards in the industry, utilizing the PowerSum principle of measurement and testing. 1U 48 port configuration Rear IDC section is KATT connector technology Both 568A and 568B applicable Integral cable management International hardware kit contains ANSI and metric hardware PID U 48 Port PowerCat 5e Patch Panel PowerCat 5e Standard Grade UTP Patch Panels Standard Grade patch panels are a versatile means for connecting horizontal cabling. Featuring an integral rear cable management tray for ease of installation and cable dressing. Suitable for high speed data transmission, these panels feature Molex s patented KATT IDC. Rear IDC section is KATT connector technology Both 568A/568B versions available Front and rear port labeling 8-port jack fields International hardware kit contains ANSI and metric hardware PID U 24 Port Category 5e Standard Grade PowerCat Patch Panel, 568A PID U 48 Port Category 5e Standard Grade PowerCat Patch Panel, 568A PID U 24 Port Category 5e Standard Grade PowerCat Patch Panel, 568B PID U 48 Port Category 5e Standard Grade PowerCat Patch Panel, 568B A-9

16 Copper Solutions PowerCat 5e UTP 89D Category 5e 12 Port Patch Panel The 89D Patch Panel is a 12 port Category 5e patch panel which is mounted into an 89D bracket. The patch panel is ideal for smaller applications, such as a branch or small office environment. A vertical configuration utilizes IDC terminations and printed circuit board. Once the bracket is mounted onto the wall, the patch panel can be snapped in for port access or in reverse for cable access. Plastic zip ties can be used for cable management. 12 port configuration Rear IDC technology Both 568A and 568B applicable Wall mountable A KPD Port Category 5e 89D Patch Panel 568B PowerCat 5e UTP Patch Cords Unshielded 4 pair stranded cable Slim Boot Design Suitable for high density active equipment with limited space between individual RJ45 jacks Available in a variety of internationally recognized RAL colors Suitable for EIA 568A/B applications Additional colors and cable lengths available for custom applications PVC sheath PCD ** # PowerCat 5e Patch Cord, 568A/B, 1 ft. PCD ** # PowerCat 5e Patch Cord, 568A/B, 3 ft. PCD ** # PowerCat 5e Patch Cord, 568A/B, 5 ft. PCD ** # PowerCat 5e Patch Cord, 568A/B, 7 ft. PCD ** # PowerCat 5e Patch Cord, 568A/B, 10 ft. PCD ** # PowerCat 5e Patch Cord, 568A/B, 15 ft. PCD ** # PowerCat 5e Patch Cord, 568A/B, 25 ft. ** Color Options - BK = Black (RAL 9017), OE = Grey (RAL 9002), OC = Red (RAL 3020), OH = Blue (RAL 5015), OJ = Green (RAL 6024), OK = Yellow (RAL 1023) Note: Additional colors and lengths available upon request #See Index for SAP Number A-10

17 Copper Solutions PowerCat 5e UTP A PowerCat 5e Unshuttered DataGate Jack Dual color-coding allows for 568 A/B wiring configuration Patented IDC V-shaped contacts that flex not fatigue when terminated Features lead-in on IDC towers to speed termination and enhance cable retention Can be terminated using industry standard punch-down tools Molded category identification on jack face as well as optional port identification icons Available in 10 standard colors 100% factory tested RoHS compliant KSJ PowerCat 5e Unshuttered DataGate Jack 568A/B Almond KSJ PowerCat 5e Unshuttered DataGate Jack 568A/B White Accessories CSP ** # Blank 6-Pack Icons (Bag of 10) CSP ** # Data 6-Pack Icons (Bag of 10) CSP ** # Voice 6-Pack Icons (Bag of 10) ** Icon Color Options - 02 = White, RD = Red, BL = Blue; other colors available upon request. PowerCat 5e DataGate Jack Patented Spring-Loaded Shutter: prevents incomplete mating protects from dust and contaminants Dual color-coding allows for 568 A/B wiring configuration Patented IDC V-shaped contacts that flex not fatigue when terminated Features lead-in on IDC towers to speed termination and enhance cable retention Can be terminated using industry standard punch-down tools Molded category identification on jack face as well as optional port identification icons Available in 10 standard colors 100% factory tested RoHS compliant KSJ PowerCat 5e DataGate Jack, 568A/B Almond KSJ PowerCat 5e DataGate Jack, 568A/B White KSJ PowerCat 5e DataGate Jack, 568A/B Black KSJ PowerCat 5e DataGate Jack, 568A/B Ivory KSJ PowerCat 5e DataGate Jack, 568A/B Gray KSJ BL PowerCat 5e DataGate Jack, 568A/B Blue KSJ GR PowerCat 5e DataGate Jack, 568A/B Green KSJ RD PowerCat 5e DataGate Jack, 568A/B Red KSJ RG PowerCat 5e DataGate Jack, 568A/B Orange KSJ YL PowerCat 5e DataGate Jack, 568A/B Yellow Accessories CSP ** # Blank 6-Pack Icons (Bag of 10) CSP ** # Data 6-Pack Icons (Bag of 10) CSP ** # Voice 6-Pack Icons (Bag of 10) ** Icon Color Options - 02 = White, RD = Red, BL = Blue; other colors available upon request. A-11

18 Copper Solutions PowerCat 5e Shielded Molex s Category 5 Shielded product range PowerCat Shielded is a complete end-to-end foil screened cabling system, providing a robust transmission system for harsh EMI or RFI environments. It is Category 5e compliant to TIA/EIA 568B and ISO/IEC 11801:2002. The product range offers backwards compatibility with Category 5 systems, with enhanced performance in support of the Gigabit Ethernet (1000 BASE-T) protocol. PowerCat 5e Shielded Cable Full duplex operation capable over four cable pairs ETL verified to TIA/EIA-568B standard 1000 to 0 foot markers Specified and tested to 100MHz A CAA-0185P PowerCat 5e Shielded Cable, Black Plenum CAA-0185P PowerCat 5e Shielded Cable, Gray Plenum CAA-0185P-RD PowerCat 5e Shielded Cable, Red Plenum CAA-0185R PowerCat 5e Shielded Cable, Black Riser CAA-0185R PowerCat 5e Shielded Cable, Gray Riser CAA-0185R-RD PowerCat 5e Shielded Cable, Red Riser Note: Standard Lengths: 1,000 feet (305 meters). Specifications subject to change without notice. Part numbers listed are for boxes. PowerCat 5e Shielded Patch Panels The PowerCat Shielded patch panel offers enhanced EMI protection and superior Alien Crosstalk suppression. Utilizing Molex s unique shuttered DataGate shielded jack, the panel provides 360 shielded protection using a two piece tin/nickel plated brass housing that encloses each individual RJ45 IDC. Port numbering is provided on the front and rear of the panel and individual ports may be color coded using connector icon labels for site-specific network administration. PID U 24 Port PowerCat 5e Shielded Patch Panel, 568A/B **Note: Icons for the Patch Panels are listed with the Jacks 24 Ports 1U EIA 568A/B wired Standard 19 rack mount Each port features the patented spring-loaded shutter: prevents incomplete mating protects from dust and contaminants Pointed IDC towers to speed termination and enhance cable retention Integral cable management shelf ensures bend radius compliance 360 shielded shuttered DataGate component compliant connector A-12

19 A Copper Solutions PowerCat 5e Shielded PowerCat 5e Shielded DataGate Jacks The PowerCat 5e Shielded DataGate Jacks offers enhanced EMI protection and improved Alien Crosstalk performance, providing 360 shielded protection using a two piece tin/nickel plated brass can that encloses the RJ-45 IDC. The RJ-45 jack features a patented spring-loaded shutter which protects it from dust and contaminants as well as provides tactile feedback the spring-loaded shutter pops out an improperly seated patch cord all with single-handed plug-in and removal. Each port features the patented spring-loaded shutter: prevents incomplete mating protects from dust and contaminants IDC contacts that flex not fatigue when terminated Pointed IDC towers to speed termination and enhance cable retention 568 A/B wiring configuration Allows rear and side entry cable termination Designed for use with Molex s Synergy, Streamline, & USO II system of wallplates and surface blocks KSJ PowerCat 5e Shielded DataGate Jack, RJ-45, 568A/B, Black Shutter Accessories CSP ** # Blank 6-Pack Icons (Bag of 10) CSP ** # Data 6-Pack Icons (Bag of 10) CSP ** # Voice 6-Pack Icons (Bag of 10) ** Icon Color Options - 02 = White, RD = Red, BL = Blue; other colors available upon request. PowerCat 5e Shielded Patch Cords Shielded 4 Pair Category 5e Stranded Cable Pre-terminated with RJ-45 Plugs Strain relief boots for mechanical integrity Available in 1, 2, 3, 5, 7 and 10 meter lengths Available in 5 colors for improved wiring closet management PCD C PowerCat 5e Shielded Patch Cord, 568A/B, 1m Red PCD E PowerCat 5e Shielded Patch Cord, 568A/B, 1m Gray PCD H PowerCat 5e Shielded Patch Cord, 568A/B, 1m Black PCD C PowerCat 5e Shielded Patch Cord, 568A/B, 2m Red PCD E PowerCat 5e Shielded Patch Cord, 568A/B, 2m Gray PCD H PowerCat 5e Shielded Patch Cord, 568A/B, 2m Black PCD C PowerCat 5e Shielded Patch Cord, 568A/B, 3m Red PCD E PowerCat 5e Shielded Patch Cord, 568A/B, 3m Gray PCD H PowerCat 5e Shielded Patch Cord, 568A/B, 3m Black PCD C PowerCat 5e Shielded Patch Cord, 568A/B, 5m Red PCD E PowerCat 5e Shielded Patch Cord, 568A/B, 5m Gray PCD H PowerCat 5e Shielded Patch Cord, 568A/B, 5m Black PCD C PowerCat 5e Shielded Patch Cord, 568A/B, 7m Red PCD E PowerCat 5e Shielded Patch Cord, 568A/B, 7m Gray PCD H PowerCat 5e Shielded Patch Cord, 568A/B, 7m Black PCD C PowerCat 5e Shielded Patch Cord, 568A/B, 10m Red PCD E PowerCat 5e Shielded Patch Cord, 568A/B, 10m Gray PCD H PowerCat 5e Shielded Patch Cord, 568A/B, 10m Black A-13

20 A Copper Solutions Keystone Patch Panel & Keystone Jacks PowerCat Keystone Patch Panel The Molex 24 port Modular Keystone Jack Patch Panel is a flexible patching solution for small to medium size installations. The panel is shipped unloaded and can be configured to provide the exact number of ports required. The PowerCat Keystone Jacks snap in easily and can be removed if required. The patch panel features an integral rear cable management tray for ease of installation and cable dressing. Available in 24 Ports, 1U Modularity provides installation flexibility Easy snap in Keystone Jacks Rear cable management included Graphite gray finish For use with PowerCat 5e or 6 Keystone jacks PID U 24 Port Keystone Patch Panel, Unloaded PowerCat Keystone Jacks Patented IDC V-shaped contacts that flex not fatigue when terminated Features pointed IDC towers to speed termination and enhance cable retention Dual color coding allows for 568A/B wiring configuration Can be terminated using industry standard punch-down tools RJ-45 Keystone jack is compatible with any product that accepts the standard keystone profile. Molded category identification on jack face KSJ ** # PowerCat 5e Keystone Jack, 8W, 568A/B KSJ ** # PowerCat 6 Keystone Jack, 8W, 568A/B ** Icon Color Options - 01 = Almond, 02 = White, 04 = Black, RD = Red, BL = Blue; other colors available upon request Note : Does not fit in our configurable faceplates A-14

21 Copper Solutions MOD, Multimedia and Router Panels The Molex MOD & Multimedia system provides a complete range of products to facilitate a complete voice cabling system, including; patch panels, termination modules, mounting frames, distribution boxes, tester interfaces and over-voltage protection. B MOD Patch Panel MOD Patch Panels provide simple, easy to use closet cross connects that convert 50-position feeder cables to individual modular jack channels. They are available in 2-, 4- and 8-wire (24 AWG) polarizations. All wiring is totally enclosed. A Velcro cable retainer allows 50-position installation without tools. Standard product comes with 50-position female receptacles on rear of patching. Available for USOC, 568A, 568B or 10BASE-T sequences. Available in 2,4 and 8 wire polarizations All wiring is totally enclosed Standard product comes with 50 position female receptacles Available for USOC, 568A, 568B or 10BASE-T sequences TIA 568B/356A 27.6E.241.B004G Port 1U 4-50 position F 8W 568B Patch Panel USOC 27.6E.259.B001G Port 1U 1-50 position F 2W USOC Patch Panel 27.6E.249.B002G Port 1U 3-50 position F 6W USOC Patch Panel 10BASE-T 27.6E.486.B001G Port 2U 4-50 position F 4W 10BT Patch Panel Multimedia Patch Panel The Multimedia Patch Panel allows for custom design field applications utilizing UTP, FTP, fiber, audio, video and coax modules. The unloaded panel is available as a 1U 24 Port or a 2U 48 Port configuration and mounts directly into a 19 rack or cabinet. Multimedia Patch Panels feature a recessed, secondary panel which stabilizes loaded connectivity while maintaining a flush, front side finish. The patch panel can be custom loaded specific to field requirements, modified for field adjustments or loaded on an as-needed basis. Compatible with single position modules, including DataGate Jacks for easy color coded port identification Front labeling for port designation Standard 19 rack mounted PID U 24 Port Multimedia Patch Panel PID U 48 Port Multimedia Patch Panel USP Panels Universal System Patching (USP) Panels add versatility to any cabling system. Individually purchased USO II modules snap into the panel allowing for custom configuration and modification of the patching field as required. USO II modules come in a variety of media including: UTP, fiber and coax allowing for a maximum quantity of media combinations for the patching field. 1U USP Panel accommodates 8 USO II Modules 2U USP Panel accommodates 16 USO II Modules 3U USP Panel ships with 8 USO II Modular Collars to accommodate 24 USO II modules (3 modules per collar) PUS U USP Panel PUS U USP Panel PUS U USP Panel B-1

22 Copper Solutions MOD, Multimedia and Router Panels 50 Port KATT IDC Voice Patch Panel The 50 Port 1U Voice Patch Panel is a versatile product, designed to utilize the minimum rack/cabinet space to support UTP 4, 25 or 50 pair cables in a voice backbone. The 50 port voice panel can support 1 or 2 pair connectivity as well as supporting analog or digital telephone services. The 10 port unshielded harmonicas allow for patching of up to 50 ports in only 1U, using standard UTP RJ-45 patch cords. 50 Ports 1U Standard 19 rack mount RJ-45 Ports Protective Labeling system Integral cable management shelf B PID x RJ45 KATT IDC Voice Patch Panel UTP, 1U T1 Patch Panel The T1 Patch Panel provides network connections for Mbps digital services. Often referred to as a DS1 signal, T1 is a transmission repeater system used to carry digitized voice over four wire twisted pair cabling. The front of the T1 Patch Panel is channel numbered and includes snap on designation strips with paper inserts for custom channel identification. The back of the panel features patented KATT IDC contacts and an integral shelf with tie downs for strain relief. Front panel is channel numbered Includes snap on designation for custom channel identification Features patented KATT IDC contacts on the back Integral cable management shelf 27.1F.241.B004G U 24 Port T1 Patch Panel - Category 3 Router Patch Panel The Router Patch Panel is ideal for the break out of 68 pin SCSI (Cisco NM-16A and NM-32A) compatible routers into RJ45 ports. The Router Patch Panel makes connecting compatible routers more efficient by removing the need to terminate octal cables individually. Configured as a 1U mountable patch panel, the back panel has four SCSI connectors which are converted, via an internal printed circuit board, into the front panel as 32 clearly identifiable RJ-45 ports. Converts 4 SCSI connectors into 32 RJ-45 ports Integral Cable Management Category 3 Performance 6mm Grounding Lug Standard 19 rack mounted PID Router Patch Panel B-2

23 PDS Solutions Category PDS The Category 6 PDS (Premise Distribution System) incorporates a unique pair separation design on the 4 Pair connector. This unique design feature enables 96 pairs to a base, making it one of the highest density Category 6 pair management blocks on the market. The Molex Category 6 PDS system is independently tested and verified by ETL Semko to ensure continuous compliance to channel and component performance criteria. C Category 6 4 Pair IDC Connectors Molex s Category 6 PDS 4 pair IDC Connector is a highperformance IDC capable of providing all your voice and data interconnect needs. The Molex Category 6 IDC Connector is uniquely design, utilizing split pair technology to provide enhanced performance. The Category 6 IDC Connector has been independently tested and verified to EIA/TIA Category 6 performance criteria while assuring a gas tight cable termination. ETL Verified Unique split pair technology Available in 4 Pair version KPD Style Category 6 C4 Connectors (bag of 100) KPD Category 6 PDS Termination Block Kits Molex s 4 Pair Category 6 Connector is a high performance IDC providing Category 6 performance to channel and permanent link configurations. This performance is guaranteed by the unique pair separation within the connector. The connectors are sold in kit form with a 96 Pair base, providing a wall mount pair management solution qualified to Category 6 performance. ETL Verified Industry standard wall mount format Available with or without mounting legs Supplied with label cards and holders Features cut-outs for cable routing for easier installation and enables cable sheathing to be maintained down to 25mm from IDC Available as a kit with IDC connectors or as stand alone base KPD KPD Pair Block Kit without Legs and with Style Category 6 C4 Connectors KPD Pair Block Kit with Legs and with Style Category 6 C4 Connectors KPD Pair Block without Legs-utilized with 110 Style Category 6 (No Connectors) KPD Pair Block with Legs-utilized with 110 Style Category 6 (No Connectors) Category 6 PDS Rack Mount Panels The unit fits on standard 19 racks and provides and economical termination solution. The Rack Mount PDS is comprised of two 96 pair blocks mounted to a 19 panel, with integral cable management rings. It is available in 3U with single high rings. ETL Verified 19 Rack Mount format 3U - Single shallow management rings 4U - Double shallow management rings Supplied with label cards and holders Features cut-outs for cable routing for easier installation and enables cable sheathing to be maintained down to 25mm from IDC KPD Pair 3U PDS Kit with Style Category 6 C4 Connectors C-1

24 PDS Solutions Category PDS PowerCat 6 UTP 110 Style Patch Cords Circuits can be easily changed by untrained personnel and without using a punch down tool Polarized to prevent accidental reversal of the cord; a molded arrow at the top of the connector provides indication of the correct orientation Integral strain relief holds the cable in place during lacing and provides proper cable retention for the terminated 110 style connector KPC Style Patch Cord, 4 pair to 4 pair, C6 1m- Gray (bag of 1) KPC Style Patch Cord, 4 pair to 4 pair, C6 2m - Gray (bag of 1) KPC Style Patch Cord, 4 pair to 4 pair, C6 3m - Gray (bag of 1) KPC Style Patch Cord, 4 pair to 4 pair, C6 5m - Gray (bag of 1) KPC Style Patch Cord, 4 pair to RJ45, C6 1m- Gray (bag of 1) KPC Style Patch Cord, 4 pair to RJ45, C6 2m- Gray (bag of 1) KPC Style Patch Cord, 4 pair to RJ45, C6 3m- Gray (bag of 1) KPC Style Patch Cord, 4 pair to RJ45, C6 5m- Gray (bag of 1) C C-2

25 PDS Solutions Category 5e 110 PDS The 110 IDC is a defacto standard used by many cabling vendors, and is broadly used in voice, data and building services cabling systems. The Molex 110 system is fully compatible with all other 110 style systems enabling deployment into existing systems for expansion or refurbishment programs. C Category 5e 110 PDS Connectors Molex s 110 Style Connector is a high-performance IDC capable of providing all your voice and data interconnect needs. It has been independently tested to EIA/TIA standards to assure a gas-tight, Enhanced Category 5 connection. The Molex 110 style connector is fully compatible with other 110 style components, including; 110 style bases, tools, patch cords and test heads. KPD Category 5e C4 Connectors (bag of 100) KPD Category 5e C5 Connectors (bag of 100) Available in 4 pair (8 pos) and 5 pair (10 pos) versions Enhanced Category 5 performance compliant IDC contact accepts one conductor only Category 5e 110 PDS Termination Block Kits The 100 Pair Blocks are the key component in wall mount 110 Premise Distribution System (PDS). The solidly constructed unit has the unique 110 connector which allows punchdown with most standard tools and has several convenient features. These include wiring strips that are marked to quickly identify 5 pair groups when lacing 25 pair backbone cable and designation strips marked for 1, 2, 4 and 5 pair connectors that are available in colors to easily identify specific sections of the PDS installation. Industry standard wall mount format Available with or without mounting legs Features cut-outs for cable routing for easier installation and enables cable sheathing to be maintained down to 25mm Available as a kit with IDC connectors or as a stand alone base Supplied with label cards and holders KPD KPD Pair Block Kit with legs & with Style Category 5e C4 connectors KPD Pair Block Kit with legs & with Style Category 5e C5 connectors KPD Pair Block Kit with legs & with Style Category 5e C4 connectors KPD Pair Block Kit with legs & with Style Category 5e C5 connectors 110 PDS Rack Mount Panels This cross connect system combines the advantages of a block-based system with frame mounted active equipment. This block-based format affords individual cable pair management not possible with an RJ patching field: the installer has the advantage of defining cross connections as either 1, 2, or 4 pair at the installation stage rather than at the initial design stage. Standard 19 rack mount Enhanced Category 5 performance 200 pair capacity Supplied with label cards and holders 3U - small cable management rings for low density applications 4U - large cable management rings for high density applications Available as a kit with IDC connectors or as stand alone units KPD Pair 3U PDS Kit with Style Category 5e C4 connectors KPD Pair 3U PDS Kit with Style Category 5e C5 connectors KPD Pair 4U PDS Kit with Style Category 5e C4 connectors KPD Pair 4U PDS Kit with Style Category 5e C5 connectors C-3

26 Optical Fiber Solutions ModLink Plug & Play ModLink is an ideal solution for mission critical applications such as Data Centers and Storage Area Networks, applications where fast installation is paramount and environments where moves, adds and changes are frequent or managed in-house. ModLink is also a viable tool for rapid deployment of an alternate data recovery system. In the event of damage or failure to a vital fiber backbone, the link can be quickly re-established without the need of technicians. 1U Modlink Panel The robust slack management of the 1U Modlink Panel enables up to 5 meters of slack to be stored per cable allowing the user to standardize on lengths in 10 meter increments. Self-contained fiber optic patching enclosures convert the MTP/MPO interface to a standard LC adapter Easy snap in removable slack management accessories designed to store up to 5 meters of Molex Modlink Round Advanced Fiber Optic cable Industry leading low insertion loss (0.75dB) Enabled for Molex RealTime Intelligent Infrastructure Management RoHS Compliant Panel mounts flush to rails no interference RTMLPQLC48OS Quad LC, Shuttered MPO, OS1 SingleMode, 48 Fiber, 0.90dB RTMLPQLC480M Quad LC, Shuttered MPO, OM1 62.5µm MultiMode, 48 Fiber, 0.90dB RTMLPQLC480M Quad LC, Shuttered MPO, OM2 50µm MultiMode, 48 Fiber, 0.90dB RTMLPQLC480M Quad LC, Shuttered MPO, OM3 50µm MultiMode, 48 Fiber, 0.75dB D Quad LC Shutter Duplex LC ModLink Cassettes ModLink is a cost-effective, quick and easy fiber system, for backbone and to-the-desk applications. The ModLink system provides premium factory-controlled optical performance, enabling flexible system configuration and fast, economical installation. Simply plug the cable into the rear of the unit and the link is operational an excellent solution for fasttrack installations. Self-contained fiber optic patching enclosures convert the MTP/MPO interface to a standard SC, LC and Quad LC coupler Industry-leading low insertion loss (0.75dB insertion loss per cassette for Laser Optimized OM3 Cassettes) Cassettes available in 12 fiber versions Installable in Molex RFR Series enclosures Front port identification plus labelling field on cassette top for fiber documentation 62.5/125μm SAP No. 50/125μm SAP No. Description (OM1) (OM2) MLCDSC12OM MLCDSC12OM Port ModLink, Duplex SC - 12 Fiber MTP MLCDLC12OM MLCDLC12OM Port ModLink, Duplex LC - 12 Fiber MTP MLCQLC12OM MLCQLC12OM Port ModLink, Quad LC Shutter- 12 Fiber MTP 50/125μm SAP No. 9/125μm SAP No. Description (OM3) (OS1) MLCDSC12OM MLCDSC12OS Port ModLink, Duplex SC - 12 Fiber MTP MLCDLC12OM MLCDLC12OS Port ModLink, Duplex LC - 12 Fiber MTP MLCQLC12OM MLCQLC12OS Port ModLink, Quad LC Shutter - 12 Fiber MTP ModLink Cables Plenum rated cables are factory terminated on both ends with multi-fiber MTP connectors for maximum fiber density Round, flexible outer jacket is easy to bend, route and install Plenum (OFNP) flame rating allows for routing cables in any indoor environment where local code allows Industry-leading low insertion loss (0.5dB) Maximum Insertion Loss for Laser Optimized OM3 Cables Cables available in 12 fiber versions ModLink Advanced fiber Optic Cables are 100% tested Optional pulling eyes installed to protect the assembly during installation 4.5mm jacket 62.5/125μm 50/125μm 50/125μm 9/125μm Description (OM1) (OM2) (OM3) (OS1) 91-X2122-2YYY 91-X2122-6YYY 91-X2122-6EYYY 91-X2122-4YYY 12 Fiber ModLink Cable NOTE : Cables available in 5m increments. Insert required distance in place of YYY in the part number. MTP is a registered trademark of US Conec. D-1

27 Optical Fiber Solutions Lightband Molex manufactures some of the most comprehensive fiber systems in the structured cabling market. Molex offers total fiber solutions, ideal for either Backbone or To-The-Desk applications. D Building Distribution Cable Round Fiber Optic Cordage Zip Fiber Optic Cordage Note: Other fiber counts and hybrid multimode- single mode cables are available. Consult factory for information. Building Distribution Cable Easy strip buffers enable fast, consistent stripping for termination Flexible, small diameter cable with high tensile strength for cable routing and installation Listed OFNR/FT4, OFNP/FT6 and also available in low smoke zero halogen Kevlar is a registered trademark of E.I. dupont denamours & Co. Inc. NON-PLENUM-OFNR 62.5μm (OM1) SAP No. 50μm (OM2) SAP No. Fiber Count AFO Z R 002 OM1 TBD AFO Z R 002 OM2 TBD 2 Fiber, Zip Cordage AFO C R 002 OM AFO C R 002 OM Fiber, Round Cordage AFO C R 004 OM AFO C R 004 OM Fiber, Round Cordage AFO B R 006 OM AFO B R 006 OM Fiber, Building Indoor AFO B R 012 OM AFO B R 012 OM Fiber, Building Indoor AFO B R 024 OM AFO B R 024 OM Fiber, Building Indoor AFO B R 048 OM AFO B R 048 OM Fiber, Building Indoor AFO B R 072 OM AFO B R 072 OM Fiber, Building Indoor AFO B R 144 OM AFO B R 144 OM Fiber, Building Indoor 50μm (OM3) SAP No. Singlemode (OS1) SAP No. Fiber Count AFO Z R 002 OM3 TBD AFO Z R 002 OS1 TBD 2 Fiber, Zip Cordage AFO C R 002 OM AFO C R 002 OS Fiber, Round Cordage AFO C R 004 OM AFO C R 004 OS Fiber, Round Cordage AFO B R 006 OM AFO B R 006 OS Fiber, Building Indoor AFO B R 012 OM AFO B R 012 OS Fiber, Building Indoor AFO B R 024 OM AFO B R 024 OS Fiber, Building Indoor AFO B R 048 OM AFO B R 048 OS Fiber, Building Indoor AFO B R 072 OM AFO B R 072 OS Fiber, Building Indoor AFO B R 144 OM AFO B R 144 OS Fiber, Building Indoor PLENUM-OFNP 62.5μm (OM1) SAP No. 50μm (OM2) SAP No. Fiber Count AFO Z P 002 OM1 TBD AFO Z P 002 OM2 TBD 2 Fiber, Zip Cordage AFO C P 002 OM AFO C P 002 OM Fiber, Round Cordage AFO C P 004 OM AFO C P 004 OM Fiber, Round Cordage AFO B P 006 OM AFO B P 006 OM Fiber, Building Indoor AFO B P 012 OM AFO B P 012 OM Fiber, Building Indoor AFO B P 024 OM AFO B P 024 OM Fiber, Building Indoor AFO B P 048 OM AFO B P 048 OM Fiber, Building Indoor AFO B P 072 OM AFO B P 072 OM Fiber, Building Indoor AFO B P 144 OM AFO B P 144 OM Fiber, Building Indoor 50μm (OM3) SAP No. Singlemode (OS1) SAP No. Fiber Count AFO Z P 002 OM3 TBD AFO Z P 002 OS1 TBD 2 Fiber, Zip Cordage AFO C P 002 OM AFO C P 002 OS Fiber, Round Cordage AFO C P 004 OM AFO C R 004 OS Fiber, Round Cordage AFO B P 006 OM AFO B P 006 OS Fiber, Building Indoor AFO B P 012 OM AFO B P 012 OS Fiber, Building Indoor AFO B P 024 OM AFO B P 024 OS Fiber, Building Indoor AFO B P 048 OM AFO B P 048 OS Fiber, Building Indoor AFO B P 072 OM AFO B P 072 OS Fiber, Building Indoor AFO B P 144 OM AFO B P 144 OS Fiber, Building Indoor D-2

28 Optical Fiber Solutions Lightband Loose Tube Cable Loose Tube Cable Molex Advanced Fiber Optic Loose Tube Indoor/Outdoor cables utilizes dry water blocking technology and super absorbent polymers rather than traditional petroleum based gels both inside the fiber tubes and the core of the cable. Molex offers designs for both plenum (OFNP) and non-plenum (riser/ofnr) flame rated applications while meeting the demanding requirements for outside plant installations. The versatile design allows users to install a single cable for both their indoor and outdoor environments without mechanical or optical compromise. All Dielectric cable construction requires no grounding or bonding Totally dry water blocked cable requires no cleaning of gels while fully meeting water blocking requirements of gel filled cables No transition required from outside plant cable to tight buffered flame rated indoor cable No transition means material cost savings, labor savings and optical loss budget savings NON-PLENUM-OFNR 62.5μm (OM1) SAP No. 50μm (OM2) SAP No Description AFO I R 012 OM AFO I R 012 OM Fiber, Non-Plenum AFO I R 024 OM AFO I R 024 OM Fiber, Non-Plenum AFO I R 048 OM AFO I R 048 OM Fiber, Non-Plenum AFO I R 072 OM AFO I R 072 OM Fiber, Non-Plenum AFO I R 144 OM AFO I R 144 OM Fiber, Non-Plenum 50μm (OM3) SAP No. Singlemode (OS1) SAP No Description AFO I R 012 OM AFO I R 012 OS Fiber, Non-Plenum AFO I R 024 OM AFO I R 024 OS Fiber, Non-Plenum AFO I R 048 OM AFO I R 048 OS Fiber, Non-Plenum AFO I R 072 OM AFO I R 072 OS Fiber, Non-Plenum AFO I R 144 OM AFO I R 144 OS Fiber, Non-Plenum PLENUM-OFNP 62.5μm (OM1) SAP No. 50μm (OM2) SAP No Description AFO I P 012 OM AFO I P 012 OM Fiber, Plenum AFO I P 024 OM AFO I P 024 OM Fiber, Plenum AFO I P 048 OM AFO I P 048 OM Fiber, Plenum AFO I P 072 OM AFO I P 072 OM Fiber, Plenum AFO I P 144 OM AFO I P 144 OM Fiber, Plenum 50μm (OM3) SAP No. Singlemode (OS1) SAP No Description AFO I P 012 OM AFO I P 012 OS Fiber, Plenum AFO I P 024 OM AFO I P 024 OS Fiber, Plenum AFO I P 048 OM AFO I P 048 OS Fiber, Plenum AFO I P 072 OM AFO I P 072 OS Fiber, Plenum AFO I P 144 OM AFO I P 144 OS Fiber, Plenum D D-3

29 Optical Fiber Solutions Lightband Molex Pre-Terminated Fiber Optic Leads offer premium factory-controlled optical performance on a variety of connectors that enable fast, economical installation. Pre-Terminated Leads are ideal for mission-critical backbone applications such as Data Center tie cables and low optical loss backbone riser cables. D Pre-Terminated Fiber Optic Leads Available in 50/125μm and 62.5/125μm MM and 9/125μm SM fiber versions Fibers compliant to ISO/IEC fiber specifications Wide variety of connector and cable types offered Cable length built to customer requirements Available in Singlemode & Multimode versions Premium factory optical performance guaranteed All assemblies are 100% factory tested Factory test results shipped with every assembly Part No. Matrix - Substitute the correct code number or letter to determine the assembly construction The Part Numbering System is as follows for Pre-Terminated Trunk Cable Assemblies. Substitute the correct code number or letter to determine the assembly construction. 91- XX FFF ISO- CC- YYY Family Code Cable Type Fiber Count Fiber Type Connector Type Length (Meters) BP = Tight Buffered OFNP, Fiber BR = Tight Buffered OFNR, Fiber IP = Loose Tube Indoor/Outdoor OFNP, Fiber IR - Loose Tube Indoor/Outdoor OFNR, Fiber MR = OFNR Micro Core for MPO MP = OFNP Micro Core for MPO OM1 = 62.5µm (500/500) OM2 = 50µm (500/500) OM3 = 50µm (2000/500) OS1 = Single Mode LC = L SC =3 ST = 1 MT-RJ (f) = B MT-RJ (m) = A MTP/MPO (f) = M No Conn = 0 Note: 1st Number = Side A 2nd Number - Side B i.e. 001 = 1 meter Example: 91-BP012-OM3-0L-075 = Tight Buffered OFNP Rated, 12 Strand 50/125µm OM3 fiber, Side A no connectors, Side B LC connectors, 75 meters long. Notes: Metric to English Conversion = 3.28 feet per meter Please consult factory for design confirmation. D-4

30 Optical Fiber Solutions Patch Cords Molex s advanced manufacturing process provides exceptional performance in patch cord assemblies. Molex maintains strict control over the ferrule endface surface. Optical Fiber Patch Cords Molex offers a comprehensive range of Fiber Optic Patch Cords in both standard and custom construction. Refer to the Special Construction Matrix Model to configure custom patch cords. 62.5µm OM1 Multimode Duplex Patch Cords Available with popular SC, LC, ST and MT-RJ connectors Flexible, small OD 2mm x 4.1mm mini cordage Insertion Loss - Singlemode: 0.40 db per connector Multimode: <0.30 db per connector All assemblies are 100% factory tested Test results included with all patch cords End 1 End # OM1 2mm Cordage 1 Meter ST ST # OM1 2mm Cordage 1 Meter ST SC # OM1 2mm Cordage 1 Meter SC SC 91.9L # OM1 2mm Cordage 1 Meter SC LC 91.9B # OM1 Cordage 1 Meter SC MT-RJ (F) 91.LL # OM1 2mm Cordage 1 Meter LC LC 91.BB # OM1 Cordage 1 Meter MT-RJ (F) MT-RJ (F) D NOTE: Replace in the Order No. as follows for these standard lengths: 2 Meter = 00200, 3 Meter = 00300, 5 Meter = 00500, 10 Meter = 01000, 15 Meter = # See Index for SAP Material No. 50µm OM2 Multimode Duplex Patch Cords End 1 End # OM2 2mm Cordage 1 Meter ST SC # OM2 2mm Cordage 1 Meter SC SC 91.9L # OM2 2mm Cordage 1 Meter SC LC 91.9B # OM2 Cordage 1 Meter SC MT-RJ (F) 91.LL # OM2 2mm Cordage 1 Meter LC LC 91.BB # OM2 Cordage 1 Meter MT-RJ (F) MT-RJ (F) NOTE: Replace in the Order No. as follows for these standard lengths: 2 Meter = 00200, 3 Meter = 00300, 5 Meter = 00500, 10 Meter = 01000, 15 Meter = # See Index for SAP Material No. 50µm Laser Optimized 10G OM3 Multimode Duplex Patch Cords End 1 End # OM3 2mm Cordage 1 Meter SC SC 91.9L # OM3 2mm Cordage 1 Meter SC LC 91.LL # OM3 2mm Cordage 1 Meter LC LC NOTE: Replace in the Order No. as follows for these standard lengths: 2 Meter = 00200, 3 Meter = 00300, 5 Meter = 00500, 10 Meter = 01000, 15 Meter = # See Index for SAP Material No. D-5

31 Optical Fiber Solutions Patch Cords D Single Mode OS1 Duplex Patch Cords End 1 End # OS1 2mm Cordage 1 Meter ST ST # OS1 2mm Cordage 1 Meter ST SC # OS1 2mm Cordage 1 Meter SC SC 91.9L # OS1 2mm Cordage 1 Meter SC LC 91.LL # OS1 2mm Cordage 1 Meter LC LC NOTE: Replace in the Order No. as follows for these standard lengths: 2 Meter = 00200, 3 Meter = 00300, 5 Meter = 00500, 10 Meter = 01000, 15 Meter = # See Index for SAP Material No. Patch Cord Special Construction Matrix Model 91. XX. X X X. XXX X 0 Family Code Connectors Fiber Type Cable Type Jacket Material Length Polish Jacket Color No Conn ST FDDI SC Simplex Escon ST-II ST w/90 boot SMA SC w/90 boot SC Duplex MT-RJ (m) MT-RJ (f) FC LC LC= 90 MU SC/APC FC/APC A B F L J U C G 3 = 10G Enhanced 50µm OM3 5 = 50/125µm OM2 6 = 625./125µm OM1 8 = SM OS1 9 = SM Dispersion Shifted 1 = 3mm Simplex 2 = 3mm Duplex 3 = 900um Tight Buffer 4 = 1.6mm Simplex 5 = 1.6mm Duplex 6 = 2mm Simplex 7 = 2mm Duplex 8 = Gemini (MT-RJ) 1 = Default (PVC) 2 = LSZH 3 = Plenum XXX = Length in meters 0 = Default (MM = PC, SM = UPC) 1 = SPC 3 = APC 0 = Default (MM = Orange, 10G = Aqua, SM = Yellow) N = Orange E = Grey K = Yellow C = Red J = Green B = Blue W = White EXAMPLE: = ST-ST SM 3mm Simplex PVC 100m UPC Polish, Yellow Please consult factory for customized constructions. D-6

32 Optical Fiber Solutions Patch Cords Molex offers a wide range of Fiber Optic Pigtails in both standard and custom construction. Standard constructions are available with the popular LC, SC and ST connectors on 900µm buffered fiber in four glass types. All our fiber Optic Pigtails are RoHS compliant. Single Fiber Pigtails (1 meter) Connector µm (OM1) MM Pigtail ST µm (OM1) MM Pigtail SC 91.L µm (OM1) MM Pigtail LC µm (OM2) MM Pigtail ST µm (OM2) MM Pigtail SC 91.L µm (OM2) MM Pigtail LC µm (OM3) MM Pigtail SC 91.L µm (OM3) MM Pigtail LC (OS1) SM Pigtail ST (OS1) SM Pigtail SC 91.L (OS1) SM Pigtail LC D Six Fiber Pigtails (2 meters) Connector 91-BR006OM µm (OM1) MM Pigtail ST 91-BR006OM µm (OM1) MM Pigtail SC 91-BR006OM1-L µm (OM1) MM Pigtail LC 91-BR006OM µm (OM2) MM Pigtail ST 91-BR006OM µm (OM2) MM Pigtail SC 91-BR006OM2-L µm (OM2) MM Pigtail LC 91-BR006OM µm (OM3) MM Pigtail ST 91-BR006OM µm (OM3) MM Pigtail SC 91-BR006OM3-L µm (OM3) MM Pigtail LC 91-BR006OS (OS1) SM Pigtail ST 91-BR006OS (OS1) SM Pigtail SC 91-BR006OS1-L (OS1) SM Pigtail LC Twelve Fiber Pigtails (2 meters) Connector 91-BR012OM µm (OM1) MM Pigtail ST 91-BR012OM µm (OM1) MM Pigtail SC 91-BR012OM1-L µm (OM1) MM Pigtail LC 91-BR012OM µm (OM2) MM Pigtail ST 91-BR012OM µm (OM2) MM Pigtail SC 91-BR012OM2-L µm (OM2) MM Pigtail LC 91-BR012OM µm (OM3) MM Pigtail ST 91-BR012OM µm (OM3) MM Pigtail SC 91-BR012OM3-L µm (OM3) MM Pigtail LC 91-BR012OS (OS1) SM Pigtail ST 91-BR012OS (OS1) SM Pigtail SC 91-BR012OS1-L (OS1) SM Pigtail LC D-7

33 Optical Fiber Solutions Rack Mount Systems Molex manufactures a wide variety of fiber management enclosures to facilitate the termination, protection and interconnection of optical fibers. The fiber management system range includes rack mount and wall mount enclosures of varying fiber counts to cater for almost all premise and campus cabling applications and environments. D 1U Specification Grade Fiber Enclosures The 1U Specification Grade Fiber Optic Enclosure is a configurable rack mount unit for storing and terminating incoming fiber cable. The enclosure may be configured with Modlink Cassettes, Fiber Pak/Adapter Plates and Universal Splice Trays. The enclosures are designed to accommodate both the needs of the installer for the initial assembly and the end user for access, maintenance and fiber protection. Great care has gone into the design to protect fiber optic cables and patch cords from damage and to maintain stable optical integrity throughout the life and use of the enclosure. The combination of high density/fiber patching with the convenience of Modlink Cassettes and Fiber Pak/Adapter Plates results in a flexible, durable and secure rack mount enclosure. Accommodates up to 4 Modlink Cassettes Lightweight, removable aluminium cover allows for easy access to the rear or top of the enclosure without the use of tools. Accommodates up to 4 Fiber Pak/Adapter Plates, which allow multiple fiber connector options and configurations Accommodates up to 2 Universal Splice Trays Dual cable spools for fiber slack storage RFR Port Specification Grade Fiber Enclosure, 1U 2U Specification Grade Fiber Enclosures The 2U Specification Grade Fiber Optic Enclosure is a configurable rack mount unit for storing and terminating incoming fiber cable. The enclosure may be configured with Modlink Cassettes, Fiber Pak/Adapter Plates and Universal Splice Trays. The enclosures are designed to accommodate both the needs of the installer for the initial assembly and the end user for access, maintenance and fiber protection. Great care has gone into the design to protect fiber optic cables and patch cords from damage and to maintain stable optical integrity throughout the life and use of the enclosure. The combination of high density/fiber patching with the convenience of Modlink Cassettes and Fiber Pak/Adapter Plates results in a flexible, durable and secure rack mount enclosure. Accommodates up to 8 Modlink Cassettes Lightweight, removable aluminum cover allows for easy access to the rear or top of the enclosure without the use of tools. Accommodates up to 8 Fiber Pak/Adapter Plates, which allow multiple fiber connector options and configurations Accommodates up to 8 Universal Splice Trays 2 sets of cable spools for fiber slack storage RFR Port Specification Grade Fiber Enclosure, 2U 4U Specification Grade Fiber Enclosures The 4U Specification Grade Fiber Optic Enclosure is a configurable rack mount unit for storing and terminating incoming fiber cable. The enclosure may be configured with Modlink Cassettes, Fiber Pak/Adapter Plates and Universal Splice Trays. The enclosures are designed to accommodate both the needs of the installer for the initial assembly and the end user for access, maintenance and fiber protection. Great care has gone into the design to protect fiber optic cables and patch cords from damage and to maintain stable optical integrity throughout the life and use of the enclosure. The combination of high density/fiber patching with the convenience of Modlink Cassettes and Fiber Pak/Adapter Plates results in a flexible, durable and secure rack mount enclosure. Accommodates up to 24 Modlink Cassettes Lightweight, removable aluminum cover allows for easy access to the rear or top of the enclosure without the use of tools. Accommodates up to 24 Fiber Pak/Adapter Plates, which allow multiple fiber connector options and configurations Accommodates up to 24 Universal Splice Trays 2 sets of cable spools for fiber slack storage RFR Port Specification Grade Fiber Enclosure, 4U D-8

34 Optical Fiber Solutions Rack Mount Systems Standard Grade Rack Mount Fiber Enclosure Standard Grade Fiber Enclosures configurable rack mount units for storing and terminating incoming fiber cable. The Standard Grade Rack Mount enclosures accept up to 8 Pak/Adapter plates. Utilized with Fiber Pak/Adapter Plates which allows multiple fiber connector options and configurations 2U accommodating 8 Fiber Pak/Adapter Plates or Modlink cassettes Hinged Plexiglas front door Fully removable top/rear panel for easy cable access Fully configured to accept either three, six or eight Molex Fiber Pak/Adapter Plates Print ready port labeling sheet D RFR-00186B Port 2U Standard Grade Fiber Enclosure Fiber Swing-Out Plastic Patch Panel The Swing-Out Plastic Patch Panel is a lightweight, robust fiber optic patch panel designed for the installation of up to 48 standard optical fibers. The panel offers an economic alternative to metal fiber enclosures. The lower tray is designed to pivot to gain access to the pre-formed fiber and splice management areas for easy cable dressing and installation. High density, economic, 48 fiber enclosure Compatible with all common fiber adapters Manufactured from high-strength, lightweight material Bottom half of panel pivots out for access to splice tray and pigtail routing area No additional cable management or splicing accessories required All common adapter types: LC, SC and ST are assembled into interchangeable front plates that accommodate 6 simplex or 12 duplex adapters each. RFR Swing-Out Fiber Panel Chassis- 1U RFR Swing-Out Fiber Panel Front Plate Blank RFR Swing-Out Fiber Panel 6 Duplex SC Singlemode RFR Swing-Out Fiber Panel 6 Duplex SC Multimode RFR Swing-Out Fiber Panel 12 Duplex LC Singlemode RFR Swing-Out Fiber Panel 12 ST Singlemode RFR Swing-Out Fiber Panel 12 ST Multimode RFR Swing-Out Fiber Panel 12 Duplex LC Multimode KFR Bend Limiting Tube 435mm (pack of 20) KFR Front Plate Labels (pack of 20) D-9

35 Optical Fiber Solutions Wall Mount Systems D Patch/Splice Demarcation Cabinet The Patching/Splicing Demarcation Cabinet provides a central point for interconnecting and/or splicing fiber optic cables. The cabinet features an integral panel that accepts Fiber Pak/ Adapter Plates and Modlink cassettes for field configuring the unit for a variety of connector types.for splicing capabilities, the unit accommodates a Splice tray Holder which allows for 6 Universal splice tray (each sold separately). For ease of installation, the door is removable. The cable management area includes a keyed lock for security. Utilizes 6 and 12 Fiber Pak/Adapter Plates or Modlink cassettes Accommodates Universal Splice Trays and Splice Tray Holder for splicing capabilities (sold separately) Accommodates Modular Splice Cassettes Keyed lock for security WFR Point Demarcation Patch Unit AFR Splice Tray Holder for use with AFR Standard Grade Wall Mount Fiber Enclosure The Standard Grade Wall Mount enclosures are configurable wall mount units for storing and terminating incoming fiber cables. Utilized with Fiber Pak/Adapter Plates, which allow multiple fiber connector options and configurations accommodating 4 Fiber Pak/Adapter Plates or Modlink Cassettes Divided and individually opened input and output demarcation areas Rubber gasket to limit dust and moisture ingression 2 cable management spools Top and bottom cable entry points Low profile and lockable WFR-00047B Port Standard Grade Fiber Wall Mount Enclosure 35.B Keyed Lock Kit Wall Mount LI-24 Fiber Box The LI-24 is a configurable, wall mounted optical fiber interconnect unit. The unit accepts up to four Fiber Pak/Adapter Plates that are available with high quality singlemode or multimode adapters (plates sold separately). Each LI-24 features internal fiber management rings, and cable ties. Utilizes 4 fiber Fiber Pak/Adapter Plates Internal fiber management 15.B016G Wall Mount LI-24 Fiber Box- Metal D-10

36 Optical Fiber Solutions Wall Mount Systems 601 Fiber Series The 601 Fiber Series wall mount system interface products are compact units for optical fiber. Available in ST, Duplex SC, MT-RJ, LC and MTP versions they provide either 6, 8, 12 or 24 fiber ports. The 601 fiber enclosure has a low profile design and provides the proper internal fiber management to ensure the integrity of the optical network. There is also provision for a user supplied seal for added security. Compact with Lock option Multimode and Singlemode configuration Top, Bottom and Rear access WFR Ports ST MM Loaded WFR Ports ST SM Loaded WFR Ports ST MM Loaded WFR Ports ST SM Loaded WFR Ports Duplex SC MM Loaded WFR Ports Duplex SC SM Loaded WFR Ports accepts Simplex SC or MT-RJ (2 fibers/port) Unloaded MT-RJ Adapter for WFR SC Adapter for WFR D MMI and MMI-R The MMI ( Multimode Interface) and MMI-R are compact wall mounted units for storing and protecting optical fiber. The internal storage spool easily holds 1.5 meters of up to 12 fibers with 900 micron buffers. Both units accept up to 6 USO II modules (ordered separately) and can be configured for multimedia using a combination of UTP, ST, and coax adapters, placing all outlets in one centrally located unit. Ideal for fiber-to-the-desk consolidation point for clustered furniture. The MMI has a sturdy snap on plastic cover and is available in three colors. The MMI-R is a sturdier version of the MMI for high traffic areas and has a graphite gray powder coated steel cover that overhangs and protects the lower module positions. WFR MMI -Plastic cover - Almond color WFR MMI- Plastic cover -White color WFR MMI-R - Metal cover -Graphite Gray WM-12 The WM-12 is a wall-mounted steel enclosure that provides up to 18 fiber ports in a minimum of space. The WM-12 has an integral configurable panel that accepts up to 6 USO II modules. Its design also guarantees that all of the media will be protected and proper fiber bend radius is maintained. Fully configurable using fiber or copper modules Available with fully lockable steel doors when security is a primary concern WFR WM-12 Graphite Gray D-11

37 Optical Fiber Solutions Connectors & Adapters Molex Fiber Optics manufactures a full line of high performance fiber connectors and adapters. Designed with the latest engineering polymer and ceramic materials, all fiber connectors have been tested to and meet all the rigorous Telecommunication, CATV and Data communication industry standards. Shuttered 6-Pak Adapter Plates Shuttered 6-Pak SC Adapter Plates fit directly into most Molex fiber management enclosures. This simple design requires no tooling as the plates install with a simple snap rivet, making installation and changes simple. Adapters on Shuttered 6-Pak plates feature Molex s unique shuttered technology which protect installers and end users from LED/Laser light emissions. Accommodates 6 or 12 fibers Available in Singlemode & Multimode versions Unique shuttered feature protects from harmful light emissions - Available upon application D Order No. SAP No. MM/SM Color Description MM/SM Black 6-Pak MT-RJ AFR Multimode Beige 6-Pak ST-SC AFR Multimode Beige 6-Pak Duplex SC AFR Singlemode Blue 6-Pak Duplex SC AFR Multimode Beige 12-Pak Quad LC AFR Singlemode Blue 12-Pak Quad LC AFR Multimode Aqua 12-Pak Quad LC AFR Singlemode Green 6-Pak SC/APC AFR AFR Pak Adapter Plates 6-Pak SC Adapter Plates fit directly into most Molex fiber management enclosures. This simple design requires no tooling as the plates install with a simple snap rivet, making installation and changes simple. Accommodates 6 or 12 fibers Available with SC, ST, LC, FC, MT-RJ adapters Available in Singlemode & Multimode versions AFR AFR AFR AFR Order No. SAP No. MM/SM Color Description AFR Multimode Metal 6-Pak ST AFR Singlemode Metal 6-Pak ST AFR Multimode Beige 6-Pak ST SC AFR Singlemode Blue 6-Pak ST SC AFR Multimode Beige 6-Pak SC AFR Singlemode Blue 6-Pak SC AFR MM/SM N/A 6-Pak Blanks (4) AFR MM/SM Black 6-Pak MT-RJ SM/MM AFR Singlemode N/A 6-Pak ST Plates Unloaded AFR Multimode Beige 6-Pak Duplex LC AFR Singlemode Blue 6-Pak Duplex LC AFR Singlemode N/A 6-Pak SC Plates Unloaded AFR Singlemode Metal 6-Pak FC Standard AFR Multimode Beige 12-Pak Duplex SC SC AFR Singlemode Blue 12-Pak Duplex SC SC AFR Multimode Aqua 6-Pak SC OM3 AFR Multimode Aqua 12-Pak SC OM3 AFR Multimode Aqua 12-Pak LC Duplex OM3 D-12

38 Optical Fiber Solutions Connectors & Adapters XPress Termination Adapters The Molex Xpress Termination kit provides quick and reliable LC, SC and ST terminations for optical Local Area Networks (LANs). The no electricity termination process combines a zirconia ceramic ferrule and connector with a one - part cold cure adhesive to achieve a dependable and low cost solution. Requiring no measuring, mixing applicator or heat - curing, the adhesive is applied directly to the fiber. A drop of accelerant provides an almost instantaneous bond between the fiber and ceramic ferrule, once contact is made in the ferrule. Using standard crimping tools, Molex s patented cleave tool and standard hand polishing steps, the process is quick and easily completed. Packaging, which includes 12 connectors, one tube of adhesive, accelerant, stripping template and abbreviated termination procedure, makes the Molex Xpress Termination kits complete and convenient to order. The simplified termination tool kits are equipped with all of the essentials needed for the successful termination of the connectors. 12 connectors, adhesive and accelerant included in each kit Electricity not required Installation in approximately 3 minutes Consistent results with minimal training D ST LC MM/SM Ferrule Boot Color Action Connectors Xpress ST 12 pak MM Zirconia 900/3 µm Black Anaerobic Xpress ST 12 pak SM Zirconia 900/3mm Black Anaerobic Xpress SC 12 pak MM Zirconia 900/3 µm Beige Anaerobic Xpress SC 12 pak SM Zirconia 900/3mm Blue Anaerobic Xpress LC 12 pak MM Zirconia 900 µm Beige Anaerobic Xpress LC 12 pak SM Zirconia 900 µm Blue Anaerobic ST is a trademark of AT&T and appears courtesy of AT&T. Xpress SC FC Connectors & Adapters FC adapters combine a metal housing and either a precision zirconia or a rugged phosphor bronze sleeve. Flange mount or D hole mount adapter styles are available. FC FC/APC SM/MM Ferrule Boot Color Action Connectors FC Connector SM Zirconia 3mm Yellow Epoxy FC Connector SM Zirconia 900 µm Yellow Epoxy FC Connector MM Zirconia 3mm Epoxy Adapters SM/MM Sleeve Color Mount FC Adapter SM/MM Zirconia N/A D-Hole FC Adapter SM/MM P Bronze N/A Square Flange D-13

39 Optical Fiber Solutions Connectors & Adapters FC/APC Connectors & Adapters FC adapters combine a metal housing and either a precision zirconia or a rugged phosphor bronze sleeve. Flange mount or D hole mount adapter styles are available. D FC/APC SM/MM Ferrule Boot Color Action Connectors FC Connector SM Zirconia 3mm Green Epoxy FC Connector SM Zirconia 900 µm Green Epoxy Adapters SM/MM Sleeve Color Mount FC Adapter SM Zirconia N/A D-Hole LC Connectors & Adapters The LC connector is the result of increased demands for smaller easier-to-use fiber connectivity. The LC connector has reduced the space requirements on equipment bays and distribution panels by 50%. SM/MM Ferrule Boot Color Action LC Connector MM Zirconia 3mm Beige Epoxy LC Connector SM Zirconia 3mm Blue Epoxy LC Connector SM Zirconia 2mm Blue Epoxy LC Connector MM Zirconia 2mm Beige Epoxy LC Connector SM Zirconia 900 µm Blue Epoxy LC Connector MM Zirconia 900 µm Beige Epoxy Adapters SM/MM Sleeve Color Mount LC Adapter MM P Bronze Beige Snap LC Adapter SM Zirconia Blue Snap Duplex LC Connectors & Adapters Duplex LC adapters feature either a snap or screw mount and are designed to support the TIA/EIA commercial building telecommunication wiring standards. SM/MM Ferrule Boot Color Action Connectors LC Duplex MM Zirconia 2mm Beige Epoxy LC Duplex SM Zirconia 2mm Blue Epoxy LC Duplex Clip MM N/A N/A Beige N/A LC Duplex Clip SM N/A N/A Blue N/A Adapters SM/MM Sleeve Mount LC Duplex w/shutter MM P Bronze Beige Snap LC Duplex w/shutter SM Zirconia Blue Snap LC Duplex w/shutter MM P Bronze Beige Snap/Screw LC Duplex w/shutter SM Zirconia Blue Snap/Screw D-14

40 Optical Fiber Solutions Field Terminable Connectors & Adapters Molex Fiber Optics manufactures a full line of high performance fiber connectors. Designed with the latest engineering polymer and ceramic materials, all fiber connectors have been tested to and meet all the rigorous Telecommunication, CATV and Data communication industry standards. MT-RJ Connectors & Adapters Occupying approximately the same space as a simplex SC adapter the MT-RJ Adapter is a feed through adapter that connects the male and female MT-RJ Connector to give a stable and reliable connection. SM/MM Ferrule Boot Color Action Connectors MT-RJ Male MM Composite 2mm Black Epoxy MT-RJ Female MM Composite 2mm Black Epoxy MT-RJ Male SM Composite 2mm Blue Epoxy MT-RJ Female SM Composite 2mm Blue Epoxy Adapters SM/MM Sleeve Color Mount MT-RJ Adapter SM/MM Composite Black Flange MT-RJ Cutout MT-RJ Adapter SM/MM Composite Black Flange SC Cutout D SC Connectors and Adapters Molex s SC fiber connector has been designed to NTT-SC standards and is completely compatible with other SC hardware. This design, which provides non-optical disconnect terminations, is a push pull coupling mechanism and has been tested to the rigorous Bellcore 326 standards. Because of its versatility, this connector is well suited for telecommunication, CATV and datacom applications. SM/MM Ferrule Boot Color Action Connectors SC Connector, MM Zirconia 3mm Beige Epoxy SC Connector SM Zirconia 3mm Blue Epoxy SC Connector MM Zirconia 2.4mm Beige Epoxy SC Connector SM Zirconia 2.4mm Blue Epoxy SC Connector MM Zirconia 900 µm Beige Epoxy SC Connector SM Zirconia 900 µm Blue Epoxy SC Duplex Clip N/A N/A N/A Black N/A Adapters SM/MM Sleeve Color Mount SC Simplex Adapter SM P Bronze Blue Snap/Screw SC Simplex Adapter SM Zirconia Blue Snap/Screw SC/APC Connectors & Adapters The Xpress SC Connector Kit provides 12 quick, low cost and reliable terminations. Requiring no measuring, mixing, applicator or heat curing, termination is achieved by applying adhesive and accelerant directly to the fiber. The kit is re-sealable making it ideal for small and large fiber installations. SM/MM Ferrule Boot Color Action Connectors SC/APC Connector SM Zirconia 3mm Green Epoxy SC/APC Connector SM Zirconia 2.4mm Green Epoxy SC/APC Connector SM Zirconia 900µm Green Epoxy Adapters SM/MM Sleeve Color Mount SC/SC APC Adapter SM Zirconia Green Flange SC/SC APC Adapter SM P Bronze N/A Snap D-15

41 Optical Fiber Solutions Connectors & Adapters Duplex SC Connectors & Adapters Duplex SC adapters feature either a snap or flange mount and are designed to support the TIA/EIA commercial building telecommunication wiring standards. D SM/MM Ferrule Boot Color Action Connectors SC Duplex, MM Zirconia 3mm Beige Epoxy SC Duplex SM Zirconia 3mm Blue Epoxy Adapters SM/MM Sleeve Color Mount SC/SC Duplex Adapter MM P Bronze Beige Flange SC/SC Duplex Adapter SM P Bronze Blue Flange SC/SC Duplex Adapter MM P Bronze Beige Snap SC/SC Duplex Adapter SM P Bronze Blue Snap SC/SC Duplex w/shutter MM P Bronze Beige Flange SC/SC Duplex w/shutter SM P Bronze Blue Flange SC/SC Duplex w/shutter MM P Bronze Beige Snap SC/SC Duplex w/shutter SM P Bronze Blue Snap Hybrid Adapters SM/MM Sleeve Color Mount Adapters SC/ST Duplex Adapter MM P Bronze Beige Flange SC/ST Duplex Adapter SM P Bronze Blue Flange SC/ST Duplex Adapter MM P Bronze Beige Snap SC/ST Duplex Adapter SM P Bronze Blue Snap FC/ST Simplex Adapter SM/MM Zirconia N/A D-Hole ST Adapters A broad range of Singlemode and Multimode adapters are available to accommodate ST and ST II connectors. Metallic or polymer versions are available with either precise zirconia ceramic, rugged phosphor bronze or cost-effective polymer alignment sleeves. SM/MM Ferrule Boot Color Action Connectors ST Connector SM Zirconia 900 µm Black Epoxy ST Connector SM Zirconia 2.4/3mm Black Epoxy ST Connector MM Zirconia 900 µm Black Epoxy ST Connector MM Zirconia 2.4/3mm Black Epoxy Adapters SM/MM Sleeve Color Mount ST Adapter MM Polymeric Metal Double-D ST Adapter MM Polymeric Black Double-D ST Adapter SM P Bronze Metal Double-D ST Adapter SM P Bronze Yellow Double-D ST Adapter SM/MM Zirconia Metal Double-D ST Adapter SM/MM Zirconia Natural Double-D D-16

42 Optical Fiber Solutions Splice Trays & Breakout Kits Universal Splice Tray The Universal Splice Tray is a configurable enclosure for both mechanical and fusion splices. Each tray includes two fusion splice sleeves and two mechanical splice sleeves. Loose tube cable is routed into and out of the tray through adjustable tube grips located at each corner. The tube grips eliminate the need for separate cable ties and are easily tightened and loosened in order to prevent over-compression of the loose tube cable. Each tray accepts 12 fusion or 10 mechanical splice terminations. AFR Universal Splice Tray Accepts mechanical and fusion splices Adjustable grips on each corner Prevents over-compression of the loose tube cable Accommodates up to 12 splices D Breakout Kit Molex s Breakout Kits are for use on multi-fibers-per tube loose tube cables, to modify the cable for direct termination. Each kit breaks out 250μm fibers from a multi-fiber loose tube into individual 900μm buffer tubes. The fibers can then be terminated using the connector manufacturer s recommended termination procedures for 900μm tight buffered fibers. Available in 4, 6, 8 and 12 fiber versions Compact design 91.B Breakout Kit, 4 Fibers Per Tube 91.B Breakout Kit, 6 Fibers Per Tube 91.B Breakout Kit, 8 Fibers Per Tube 91.B Breakout Kit, 12 Fibers Per Tube D-17

43 Free Space Optics Canobeam Canobeam is a free space optics solution that provides a point-to-point wireless optical beam transmission system. Typically set-up to transmit data between two structures, Canobeam is ideally suited where no fiber is available, where fiber is too costly, back-up transmission systems and disaster recovery systems. Canobeam is a highly reliable and secure technology. It is also protocol independent and transmits any higher layer protocol including Ethernet, SDH, ATM, TCP/IP up to Gigabit speeds E Model MFSO-110 The Canobeam family incorporates real-time beam auto tracking to provide high availability point-to-point wireless connectivity, designed to support high speed applications. As part of the Molex total structured cabling solution, Canobeam is ideal for campus and building-to-building connectivity as either a primary or backup backbone link. The robust Canobeam can be installed outside or in a window for point-to-point applications. Protocol Independent Supports transmission speeds of 25 to 156 Mbps Reliable transmission distances of 20 to 500 meters Real time auto tracking function maintains beam alignment compensating for changes in the installation due to environmental factors Requires no radio frequency allocations, permits or licenses Highly secure data links Economical installation and operating costs SNMP Management available MFSO-110-Type SFP Mbps FSO Wireless Meter MFSO V-Type SFP TBD 48V DC Mbps FSO Wireless Meter MFSO-SFPMM Base-FX, OC3, STM SONET MM SFP MOD module MFSO-SFPSM Base-FX, OC3, STM SONET SM SFP MOD module FA Pan Tilt Swivel Mounting Bracket * Fast Ethernet requires Full Duplex Interface Model MFSO-120 The Canobeam family incorporates real-time beam auto tracking to provide high availability point-to-point wireless connectivity, designed to support high speed applications. As part of the Molex total structured cabling solution, Canobeam is ideal for campus and building-to-building connectivity as either a primary or backup backbone link. The robust Canobeam can be installed outside or in a window for point-to-point applications. Protocol Independent Supports transmission speeds of 25 to 156 Mbps Reliable transmission distances of 100 to 2000 meters Real time auto tracking function maintains beam alignment compensating for changes in the installation due to environmental factors Requires no radio frequency allocations, permits or licenses Highly secure data links Economical installation and operating costs SNMP Management available MFSO-120 Type SFP FSO Wireless Meter MFSO V-Type SFP TBD 48V DC Mbps FSO Wireless Meter MFSO-SFPMM Base-FX, OC3, STM SONET MM SFP MOD module MFSO-SFPSM Base-FX, OC3, STM SONET SM SFP MOD module FA Pan Tilt/Swivel Mounting Bracket * Fast Ethernet requires Full Duplex Interface E-1 CanoBeam is a trademark of Canon and appears courtesy of Canon. Model MFSO-130 The Canobeam family incorporates real-time beam auto tracking to provide high availability point-to-point wireless connectivity, designed to support Gigabit Ethernet applications. As part of the Molex total structured cabling solution, Canobeam is ideal for campus and building-to-building connectivity as either a primary or backup backbone link. The robust Canobeam can be installed outside or in a window for point-to-point applications. Protocol Independent Supports transmission speeds of 1.25 Gbps Reliable transmission distances of 100 to 1000 meters Real time auto tracking function maintains beam alignment compensating for changes in the installation due to environmental factors Requires no radio frequency allocations, permits or licenses Highly secure data links Economical installation and operating costs SNMP Management available MFSO-130-Type SFP Gbps FSO Wireless Meter MFSO V-Type SFP TBD 48V DC 1.25 Gbps FSO Wireless Meter MFSO-SFPSX Gigabit Ethernet MM SFP MOD module MFSO-SFPLX Gigabit Ethernet SM SFP MOD module FA Pan Tilt Swivel Mounting Bracket

44 Industrial Solutions Molex s Industrial Solutions are specifically designed for installations within harsh environments. Ideally suited for manufacturing facilities, water treatment plants, transportation hubs and food and beverage facilities, the industrial solution features a unique bayonet latching system that ensures network performance is constantly maintained. Industrial Copper Assemblies Enabling side and rear entry termination the connector is housed within a rugged Polyester covering. Plugs and patch cords are housed within a rugged Polyester covering and features a bayonet style latch receptacle for quick and easy connection and proper mating depth. The latching mechanism provides one sealing surface which protects the connector from dust, moisture, dirt, vibration, chemicals, electromagnetic interference and temperature extremes, reducing the likelihood of product failure. Category 5 One Sealing Surface Bayonet style latch receptacle Suitable for extreme environments Water and dust tight for functional integrity Industrial Ethernet Connector RJ Industrial Ethernet Plug RJ Industrial Ethernet Dust Cap Assembly Industrial Ethernet Jack 110 Panel Mount XX* # Industrial Ethernet Bayonet Style Double End RJ XX* # Industrial Ethernet Bayonet Style Double End RJ XX* # Industrial Ethernet Bayonet Style Single End RJ-45 # See Index for SAP No. F Industrial Fiber Assemblies Designed with rugged and compact housings, Molex s optical industrial LC duplex assemblies incorporate the high performance of a fiber optic connection with the versatility of a rugged industrial connector. The bulkhead adapter mounts directly in a panel cut-out, serving as a sealed feed-through. The removable connector provides sealing between both the adapter mating-surface as well as the cable exiting the connector. Molex s optical industrial assemblies are compatible with many fiber types and cable constructions and ideal for both indoor and outdoor applications This assembly is particularly well-suited for long distances or remote connections up to 300 Kilometers distance, using multimode fiber and over 1 Kilometer distance using singlemode fiber. Available in Singlemode & Multimode versions LC connector designed to Telcordia GR-326-CORE Suitable for indoor and outdoor applications Suitable for extreme environments Water and dust tight for functional integrity LC Industrial Adapter, Phosphor Bronze Alignment Sleeve, MM - Black LC Industrial Adapter, Zirconia Alignment Sleeve, SM - Black MTP Industrial Adapter Wallplate Stainless Steel Robust design Low profile for inconspicuous network connecting Single Gang - 120mm x 70mm x 11mm IP 67 rated Totally protected from the ingress of dust Protects against temporary immersion in water between 15cm - 1m for 30 minutes Accommodates Molex s Industrial Connector WSS Port, Industrial Solution Wallplate - Unloaded WSS Port, Industrial Solution Wallplate - Unloaded F-1

45 Industrial Solutions F LC & MPO Cable Assemblies Available in multiple lengths, LC & MPO Industrial Cable Assemblies are housed within a rugged Polyester covering which features a bayonet style latch receptacle for quick and easy connection and proper mating depth. The latching mechanism provides one sealing surface which protects the plug from dust, moisture, dirt, vibration, chemicals, electromagnetic interference and temperature extremes, reducing the likelihood of product failure. Available in Singlemode & Multimode versions 100% optically tested to ensure quality performance Suitable for indoor and outdoor applications One Sealing Surface Push-pull insertion with bayonet style mechanical latch IP 67 and NEMA 6P ratings Suitable for extreme environments Water and dust tight for functional integrity Potted/Sealed version available for extra durability LC available in Indoor/Outdoor MPO are Indoor/Outdoor 62.5/125μm 50/125μm 50/125μm 9/125μm Description (OM1) (OM2) (OM3) (OS1) 91-BP002OM1-HH-*** 91-BPxxxOM2-HH-*** 91-BPxxxOM3-HH-*** 91-BPxxxOS1-HH-*** OFNP, TB, 2 Fiber Patch Cord 91-BR002OM1-HH-*** 91-BRxxxOM2-HH-*** 91-BRxxxOM3-HH-*** 91-BRxxxOS1-HH-*** OFNR, TB, 2 Fiber Patch Cord 91-IC002OM1-HH-*** 91-ICxxxOM2-HH-*** 91-ICxxxOM3-HH-*** 91-ICxxxOS1-HH-*** OFNR, Indoor/Outdoor Fiber Patch Cord NOTE : Replace xxx with fiber count and *** with the desired length of patch cord MTP Cable Assemblies Available in multiple lengths, MTP Industrial Cable Assemblies are housed within a rugged Polyester covering which features a bayonet style latch receptacle for quick and easy connection and proper mating depth. The latching mechanism provides one sealing surface which protects the plug from dust, moisture, dirt, vibration, chemicals, electromagnetic interference and temperature extremes, reducing the likelihood of product failure. Available in Singlemode & Multimode versions 100% optically tested to ensure quality performance Suitable for indoor and outdoor applications One Sealing Surface Bayonet style latch receptacle IP 67 and NEMA 6P ratings Suitable for extreme environments Water and dust tight for functional integrity Potted/Sealed version available for extra durability 62.5/125μm 50/125μm 50/125μm 9/125μm Description (OM1) (OM2) (OM3) (OS1) 91-IR0120M1-TT-*** 91-IRxxxOM2-TT-*** 91-IRxxxOM3-TT-*** 91-IRxxxOS1-TT-*** OFNR LT, 12 Fiber Patch Assembly 91-IP012OM1-TT-*** 91-IPxxxOM2-TT-*** 91-IPxxxOM3-TT-*** 91-IPxxxOS1-TT-*** OFNP, LT, 12 Fiber Patch Assembly NOTE : Replace xxx with fiber count and *** with the desired length of patch cord F-2

46 Work Area Solutions Synergy Series Molex s Synergy Wallplate system is an industrially designed family of wallplates providing a sleek, curved, and low profile appearance. The wallplates are available in vertical orientation (114mm x 71mm) and square orientation (86mm x 86mm) making them ideal for use in most offices. Synergy Wallplates Single Gang - 120mm x 70mm x 11mm Double Gang mm x 120.7mm x 10.9mm Low profile for inconspicuous network connecting Clear concise labelling Rear loading to reduce tampering Angled version to ensure proper cable bend radius Accommodates PowerCat and PowerCat 6 UTP & FTP DataGate jacks - See Section A Accommodates SC, LC, ST and MT-RJ single and dual bezel fiber modules - See Section G Accommodates Media Configurable modules - See Section G DataGate Jacks Section A Fiber Modules Section G Multimedia Modules Section G WSY * # 6 Port Synergy Wallplate - Unloaded WSY * # 4 Port Synergy Wallplate - Unloaded WSY * # 3 Port Synergy Wallplate - Unloaded WSY * # 4 Port 1U Synergy Wallplate-Unloaded WSY * # 4 Port Angled Synergy Wallplate - Unloaded WSY * # 2 Port Angled Synergy Wallplate - Unloaded WSY * # 12 Port Double Gang Synergy Wallplate - Unloaded WSY * # 10 Port Double Gang Synergy Wallplate - Unloaded WSY * # 8 Port Double Gang Synergy Wallplate - Unloaded WSY * # 2 Port Synergy Wallplate * Color Options - 1 = Almond, 2 = White, 5 = Ivory # See Index for SAP No. Synergy Surface Boxes Low profile for inconspicuous network connecting Available in 1, 2, 4 and 6 port versions Rear loading jacks to reduce tampering Clear concise labelling 3 colors available Accommodates PowerCat and PowerCat 6 UTP & FTP DataGate Plus jacks - See Section A Accommodates SC, LC, ST and MT-RJ single position fiber modules - See Section G Accommodates Media Configurable modules - See Section G G DataGate Jacks Section A Fiber Modules Section G Multimedia Modules Section G SBX Port Modular Surface Box - Unloaded- White SSY * # 2 Port Modular Surface Box - Unloaded SSY * # 4 Port Modular Surface Box - Unloaded SSY * # 6 Port Modular Surface Box - Unloaded Accessories KSJ * # Single Position Blank Module (Bag of 25) CSP Clear Label Holder (Bag of 25) CSP ** # Snapz Telecom Icon Tree (Bag of 10) CSP ** # Snapz Alpha Icon Tree (Bag of 10) * Color Options - 1 = Almond, 2 = White, 5 = Ivory # See Index for SAP No. ** Color Options - 02 = White, RD = Red, BL = Blue Synergy Modular Furniture Outlets Low profile for inconspicuous network connecting Available in 3 and 4 Port versions Rear loading jacks to reduce tampering Clear concise labelling 3 colors available Accommodates PowerCat and PowerCat 6 UTP & FTP DataGate Plus jacks - See Section A Accommodates SC, LC, ST and MT-RJ single position fiber modules - See Section G Accommodates Media Configurable modules - See Section G SSY * # 4 Port /NEMA Cutout Size Minimum x Unloaded SSY * # 3 Port /TIA 569A Cutout Size x x SSY * # 4 Port/TIA 569A Cutout Size 1.35 x 2.99 Accessories CSP Clear Label Holder (Bag of 25) CSP ** # Snapz Telecom Icon Tree (Bag of 10) CSP ** # Snapz Alpha Icon Tree (Bag of 10) * Color Options - 1 = Almond, 2 = White, 5 = Ivory # See Index for SAP No. ** Color Options - 02 = White, RD = Red, BL = Blue G-1

47 Work Area Solutions USO II Series USO II multimedia outlet system is a comprehensive modular system that can be easily re-configured without removing the faceplate bezel. For maximum versatility USO II outlets have a three part design; fascia, bezel and module. USO II Wallplate & Bezels Utilize USO II modules Clear concise labelling Easily configured/reconfigured from the front Accommodates DataGate jacks Low profile for inconspicuous network connecting Accommodates PowerCat and PowerCat 6 UTP & Shielded DataGate jacks - See Section A Accommodates SC, LC, ST single and dual position fiber modules - See Section G Accommodates Media Configurable modules - See Section G DataGate Jacks Section A Fiber Modules Section G Multimedia Modules Section G WUS * # USO II Single Gang Bezel, Alpha Icons - Unloaded WUS * # USO II Double Gang Bezel, Alpha Icons - Unloaded WUS * # USO II Single Gang Bezel, Telecom Icons - Unloaded WUS * # USO II Double Gang Bezel, Telecom Icons - Unloaded Accessories MUS ** # USO II Single Port Fascia - Unloaded (bag of 25) MUS ** # USO II Double Port Fascia - Unloaded (bag of 25) MUS ** # USO II Blank Modules (bag of 20) CSP USO II Clear Label Holders (bag of 20) * Color Options - 1 = Almond, 2 = White # See Index for SAP No., ** Color Options - 01 = Almond, 02 = White, 04 = Black, G USO II UNI-FIT Modular Furniture Outlets The USO II Uni-Fit modular furniture outlet features adjustable latches that accommodate most standard and nonstandard modular furniture openings providing flexibility for hard-to-fit openings. Simply attach the base plate onto the furniture and adjust latches to the opening, slip on the cover, and snap in a USO II module. Each Uni-Fit accommodates up to four voice or data channels ( 2 modules). SUS ** # USO II Uni-Fit - Unloaded ** Color Options - 01 = Almond, 02 = White, 04 = Black # See Index for SAP No., Low profile for inconspicuous network connecting Clear concise labelling Easily configured/reconfigured from the front Accommodates PowerCat and PowerCat 6 UTP & Shielded DataGate Plus jacks - See Section A Accommodates SC, LC, ST single and dual bezel fiber modules - See Section G Accommodates Media Configurable modules - See Section G DataGate Jacks Section A Fiber Modules Section G Multimedia Modules Section G USO II Surface Boxes The USO II Surface Boxes are ideal for use where a surface mount is needed in a confined space. Surface Boxes provide the option of either side or base entry of cables and may be mounted using screws or a magnet kit ( sold separately). Icons may be used to clearly identify ports alongside the modules. SUS ** # USO II 1U Surface Box- Unloaded SUS ** # USO II 2 1U Surface Box- Unloaded Magnet Kit for SUS ** 35.B Magnet Kit for SUS ** ** Color Options - 01 = Almond, 02 = White, 04 = Black # See Index for SAP No., Low profile for inconspicuous network connecting Clear concise labelling Easily configured/reconfigured from the front Accommodates PowerCat and PowerCat 6 UTP & Shielded DataGate jacks - See Section A Accommodates SC, LC, ST single and dual position fiber modules - See Section G Accommodates Media Configurable modules - See Section G G-2

48 Work Area Solutions Streamline Wallplates Streamline wallplates are designed as a low profile solution for applications where minimum labelling and port designation is required. Available in plastic and stainless steel, Streamline wallplates are compatible with Molex s copper, fiber, audio and video modules. Streamline Plastic Wallplates Low profile for inconspicuous network connecting Clear concise labelling Rear loading to reduce tampering UL Approved Accommodates PowerCat and PowerCat 6 UTP & Shielded DataGate jacks - See Section A Accommodates SC, LC, ST single and dual position fiber modules - See Section G Accommodates Media Configurable modules - See Section G DataGate Jacks Section A Fiber Modules Section G Multimedia Modules Section G WPJ * # 1 Port Streamline Plastic Wallplate - Unloaded WPJ * # 2 Port Streamline Plastic Wallplate - Unloaded WPJ * # 3 Port Streamline Plastic Wallplate - Unloaded WPJ * # 4 Port Streamline Plastic Wallplate - Unloaded WPJ * # 4 Port 1U Plastic Streamline Wallplate - Unloaded WPJ * # 6 Port Streamline Plastic Wallplate - Unloaded Accessories CSP ** # Blank 6-Pack Icons (Bag of 10) CSP ** # Data 6-Pack Icons (Bag of 10) CSP ** # Voice 6-Pack Icons (Bag of 10) CSP * # A-F Icon Tree (Bag of 10) * Color Options - 1 = Almond, 2 = White, 5 = Ivory, ** Color Options - 02 = White, RD = Red, BL = Blue # See Index for SAP No. G Streamline Stainless Steel Wallplates Low profile for inconspicuous network connecting Clear concise labelling Rear loading to reduce tampering Robust design UL Approved Accommodates PowerCat and PowerCat 6 UTP & Shielded DataGate jacks - See Section A Accommodates SC, LC, ST single and dual position fiber modules - See Section G Accommodates Media Configurable modules - See Section G DataGate Jacks Section A Fiber Modules Section G Multimedia Modules Section G WSS Port Stainless Steel Streamline Wallplate - Unloaded WSS Port Stainless Steel Streamline Wallplate - Unloaded WSS Port Stainless Steel Streamline Wallplate - Unloaded WSS Port Stainless Steel Streamline Wallplate - Unloaded WSS Port Stainless Steel Streamline Wallplate - Unloaded Accessories CSP ** # Blank 6-Pack Icons (Bag of 10) CSP ** # Data 6-Pack Icons (Bag of 10) CSP ** # Voice 6-Pack Icons (Bag of 10) CSP * # A-F Icon Tree (Bag of 10) ** Color Options - 02 = White, RD = Red, BL = Blue # See Index for SAP No. G-3

49 Work Area Solutions Copper Modules for Synergy Series Molex offers a comprehensive range of copper-to-thedesk modular systems to suit all applications and market requirements. Elegantly designed, these products offer a low profile and versatile modular construction, allowing the user to easily expand the network as it grows. G MSY MSY MSY MSY Single Synergy Copper Modules Single Synergy Modules are versatile, industrially designed inserts for use across a broad range of Molex product, including wallplates, patch panels and modular furniture outlets. Single Synergy Modules are rear loading. MSY MSY MSY * # F Video MSY * # S Video Coupler MSY R* # RCA Coupler Red MSY W* # RCA Coupler White MSY Y* # RCA Coupler Yellow MSY * # BNC Coupler MSY R* # RCA Field Terminable Red MSY W* # RCA Field Terminable White MSY Y* # RCA Field Terminable Yellow MSY * # S Video Field Terminable KSJ * # Single Position Blank (Bag of 25) * Color Options - 01 = Almond, 02 = White, # See Index for SAP No. Double Synergy Copper Modules Double Synergy Modules are versatile, industrially designed inserts for use across a broad range of Molex product, including wallplates, patch panels and modular furniture outlets. Double Synergy Modules are rear loading. Compatible with: Synergy family USO II family Streamline family Modular Furniture Outlets, Boxes & MUTO Multimedia Patch Panels Compatible with: Select Synergy and Streamline wallplates MSY MSY MSY * # 2 A Plus Video MSY * # S Plus Video MSY * # 15 pin HD D-Sub Coupler SVGA MSY * # Blank (bag of 25) MSY * # 15 Pin HD D-Sub Coupler Fascia (Bag of 10) MSY * # 3.5mm Field Terminable * Color Options - 01 = Almond, 02 = White, # See Index for SAP No. MSY Accessories ADA Cat 5e Coupler ADA Cat 5e Shielded Coupler ADA G-4

50 Work Area Solutions Fiber Modules for Synergy Series Molex offers a comprehensive range of fiber-to-the-desk modular systems to suit all applications and market requirements. Elegantly designed, these products offer a low profile and versatile modular construction, allowing the user to easily expand the network as it grows. Supporting SC, LC, ST and MT-RJ fiber adapters, Molex s work area solutions are suitable for both singlemode and multimode installations and include Molex s unique shuttered technology protecting the user from harmful light emissions. MSY MSY Single Synergy Fiber Modules Designed for use within the Molex Synergy range of wallplates and surface blocks, SC jacks are available in five colors and provide singlemode and multimode performance. Multimode & Singlemode configuration Designed to fit into Synergy, Streamline & USO II system of wallplates and surface blocks - See Section L Available in 5 colors SC adapter available with or without shutter MSY MSY MSY ** # Synergy Module Single ST - Singlemode MSY ** # Synergy Module Single ST - Multimode MSY ** # Synergy Module Single SC - Singlemode MSY ** # Synergy Module Single MT-RJ - Singlemode/Multimode MSY ** # Synergy Module Duplex LC - Multimode MSY ** # Synergy Module Duplex LC - Singlemode KSJ ** # Blank Single Position Module ** Color Options - 01 = Almond, 02 = White, # See Index for SAP No. MSY Double Synergy Fiber Modules Double Synergy Modules are versatile, industrially designed inserts for use across a broad range of Molex products, including wallplates, patch panels and modular furniture outlets. Double Synergy Modules are front loading. Multimode & Singlemode configuration Designed to fit into Synergy, Streamline 1U wall plates & USO II system of wallplates and surface blocks - Available in 2 colors G MSY MSY ** # Blank Module (bag of 25) MSY ** # Synergy Module ST - Multimode MSY ** # Synergy Module ST - Singlemode MSY ** # Synergy Module Duplex SC - Singlemode with shutter MSY ** # Synergy Module Duplex SC - Singlemode no shutter MSY ** # Synergy Module Duplex SC - Multimode with shutter ** Color Options - 01 = Almond, 02 = White, # See Index for SAP No. G-5

51 Work Area Solutions Copper Modules for USO II Series MUS MUS USO II Modules The USO II multimedia outlet system is a comprehensive group of modular products which can be easily configured and reconfigured without removing the faceplate bezel. For maximum versatility, USO II outlets have a three-part design: bezel, fascia and jacks. USO II bezels fit all standard US 1 and US 2 wall boxes. USO II modules make it easy to customize outlets for any UTP or fiber application. Modules can be purchased either pre-configured or can be built by purchasing either 1U 1 Port or 1U 2 Port fascia and inserting DataGate Jacks. Compatible with: Synergy family USO II family Uni-Fit Modular Furniture Outlets Modular Furniture Outlets, Boxes & MUTO USP Panels G MUS MUS MUS MUS MUS ** # BNC MUS ** # 2 BNC Coupler MUS ** # F Video Coupler MUS ** # 2 Audio MUS ** # 2 Audio Field Terminable MUS ** # S Video Field Terminable MUS ** # 2 F Video MUS ** # 15 Pin HD D-Sub Coupler SVGA MUS ** # 3 RCA Field Terminable MUS ** # SVGA D -Sub Field Terminable MUS ** # 3 RCA Field Terminable MUS ** # Component Video Coupler MUS ** # 3.5mm Field Terminable ** Color Options - 01 = Almond, 02 = White, # See index for SAP No. MUS MUS MUS MUS Blank Modules MUS ** # Blank Module (Bag of 20) Fascias MUS ** # 1 Port Fascia (Bag of 25) MUS ** # 1 Port Fascia (Bag of 10) MUS ** # 2 Port Fascia ( Bag of 25) MUS ** # 2 Port Fascia (Bag of 10) MUS ** # 15 Pin HD D-Sub Coupler Fascia (Bag of 10) Accessories CSP ** # Snapz Telecom Icon Trees ( Bag of 10) CSP ** # Snapz Alpha Icon Tree ( Bag of 10) ** Color Options - 01 = Almond, 02 = White, # See index for SAP No. G-6

52 Work Area Solutions Fiber Modules for USO II Series USO II Modules The USO II multimedia outlet system is a comprehensive group of modular products which can be easily configured and reconfigured without removing the faceplate bezel. For maximum versatility, USO II outlets have a three- part design; bezel, fascia and jacks. USO II bezels fit all standard US 1 and US 2 wall boxes. USO II Bezels are available as Singleor Double-Gang. MUS ** # Blank USO II Modules (bag of 20) MUS ** # USO II Module ST - Multimode MUS ** # USO II Module SC - Singlemode MUS ** # USO II Module SC - Multimode MUS ** # USO II Module SC - Singlemode Duplex with shutter MUS ** # USO II Module SC - Multimode Duplex with shutter MUS ** # USO II Module ST - Singlemode MUS ** # USO II Module ST - Multimode 2U ** Color Options - 01 = Almond, 02 = White, # See index for SAP No. The Single-Gang holds up to 3 modules and the Double-Gang holds up to 6 modules. Easily configured/reconfigured from the front ST, SC, LC, MT-RJ adapters Multi User Telecommunications (MUTO) The Multi User Telecommunications Outlet (MUTO) is the ideal solution for high density fiber or UTP applications in the office environment. This sleek product holds up to 12 USO II modules and is easily mounted near file servers, hub products and workstations. For added flexibility, the outlet can be mounted over US1 Single gang boxes or onto power poles. For fiber solutions, the MUTO only accepts angled fiber modules of which up to 6 2U modules can be loaded. Easily configured/reconfigured from the front Holds up to 12 USO II modules Holds up to 6 2U angled fiber modules G CPT Multi User Telecommunications Outlet (MUTO) Accessories CSP ** # Snapz Telecom Icon Tree (Bag of 10) CSP ** # Snapz Alpha Icon Tree ( Bag of 10) ** Color Options - 01 = Almond, 02 = White, # See index for SAP No. G-7

53 Cable Management Solutions Panels & Accessories Cable Management is an important part of any installation. Combining aesthetics with functionality, the Molex range of rack mountable cable management products offer cable management with minimal effort, ensuring long term manageability of the wiring closet. PDS Accessories Provides complete horizontal and vertical cable management in one unique product. Molex Premise Networks exclusive rings speed horizontal cable routing. The integral cable retention feature forms a vertical wiring trough between 2 rows of blocks. If a higher density system is needed, the ring footprint permits interchange with 100-pair bases. KPD U PDS Horizontal Cable Manager 36.B U PDS Horizontal Cable Manager H 1 Position Cable Management Panel 1 Position Ring Run 2 Position Recessed Double Density Ring Run Horizontal Cable Management Panels Available in various ring sizes for different cable densities Standard 19 rack mount 1U and 2U panels Styling complements Molex Patch Panel Range 1U SAP No. Description 25.B016G Ring Run Panel 25.B035G Deep Ring Run Panel 25.C001G Cable Management Panel 25.B033G Horizontal/Vertical Ring Run Panel 25.B034G Deep Horizontal/Vertical Ring Run Panel 25.B018G Blank Panels 25.B047G Ring Run Cover (pack of 6) 25.B045G Ring Run with Cover 2U 25.B013G Ring Run Panel 25.B032G Horizontal/Vertical Ring Run Panel 25.B044G Ring Run with Cover 25.B058G Recessed Double Density Ring Run Panel 25.B059G Front and Rear Ring Run Panel 25.B019G Blank Panels 25.B046G Ring Run Cover (pack of 6) 25.X Ring Run Cover (2 per bag) Robust construction to handle harsh treatment Flexible rings for convenient operation Rounded edges to prevent damage to patch cords H-1

54 Cable Management Solutions Panels & Accessories Horizontal Cable Management Blank Panels Blank Panels are the finishing touch to a job well done. They are used on 19 racks to fill in the empty spaces left between equipment or to reserve space for future expansion. They are constructed of heavy duty steel with an attractive graphite grey powder coat finish. 25.B018G U Blank Panel 25.B019G U Blank Panel 25.B020G U Blank Panel Vertical Cable Management The Between the rack and the Side of Rack Vertical Cable Managers provide cable management between racks and at the end of rack groups. Each panel utilizes 2U high-density cable management rings for maximum cable accommodation. H CMA Between the Rack Vertical Cable Manager (set of 2) CMA Side of Rack Vertical Cable Manager (set of 2) CMA U Vertical Cable Manager Mount Panel H-2

55 Cable Management Solutions Panels & Accessories 1U Side Ring 1U Side Ring Deep Cable Management Rings Cable Management Rings are designed to speed cable -dressing during an installation or change and to provide an organized format for system maintenance. Ideal for use with the Molex Open Bay Rack or Omega Rack distribution frames. Side & Rear management rings available Provides vertical cable management on a rack or wall Plastic Rings: Black Lexan 943A-701 Metal Rings: 1/4 Steel rod with black powder coat Rear Ring 2U Side Ring 25.B U Side Ring 25.B U Side Ring Deep 25.B U Side Ring 25.B Rear Ring H Cable Management Straps Cable Management Straps are used for securing vertical cables at the end of rack groupings. Constructed of Velcro, the straps are mounted to the rack utilizing the existing hardware. 35.B Cable Management Straps (bag of 25) Equipment Shelves The Double Sided Solid Equipment Shelf supports up to 135kg (300lbs.). It adjusts for wall or 19 rack mounting. When rack-mounted, the shelf aligns flush with the front of the rack and occupies one rack position (plus height of equipment supported.) The side supports offer extra equipment security. Ideal for supporting a computer monitor. The Single Sided Solid Equipment Shelf supports up to 45kg (100lbs.). It is 19 rack mountable so that half the unit protrudes from the front of the rack while the other half protrudes from the back of the rack. The shelf occupies two rack positions (plus the height of equipment supported). Ideal for use as a desk within the rack. 19 rack or wall mount flexibility Flush or Center Mounting Ideal partners for computer equipment RAA Double Sided Solid Equipment Shelf RAA Single Sided Solid Equipment Shelf H-3

56 Cable Management Solutions Panels & Accessories Wall Mount Racks Wall-Mount Racks are ideal for smaller installations and can be stacked for future expansion. Available in shallow, deep and ultra-deep mount, all racks are hinged for easy access to the back of mounted equipment. Racks can be installed using toggle bolts or wall anchors. Stackable for future growth Hinged for easy equipment access Variety of position sizes available U Shallow Wall Mount Rack U Shallow Wall Mount Rack 25-1D U Deep Wall Mount Rack 25-1D U Deep Wall Mount Rack Omega Rack The Omega Rack is an ideal solution for central placement of communications cabling and equipment. The rack features a multitude of rack mounting options and cable management features including: RAA Omega Rack Compatible with 19 or 23 panels and equipment Increased depth of side rails allows extra space for routing cables along the inside and outside of the rack Side rails are slotted for using Velcro tie wraps preferred for securing cable Feed-through holes on side rails provide easy access from front to back of rack Top cable management trough allows for proper cable bend radius management and includes slots for Velcro tie wraps Accommodates Molex Premise Networks Cable Management Rings (sold separately) H Open Bay Rack The Open Bay Rack provides central placement of communications cabling and equipment. The rack features 42 rack mounting positions, each 1¾ in height. Cross bracing is provided for top and bottom. The Open Bay design provides easy access for installation and maintenance. Incoming cables are terminated on the back, separating them from cross connects on the front. Mounting holes: EIA spaced #12-24 on both front and rear flanges 42 rack mounting positions Panel Space: 1956mm x 483mm (77 H x 19 W) Accommodates Molex Premise Networks Cable Management Rings (sold separately) RAA Open Bay Rack H-4

57 Tools and Testers 110 Punchdown Termination Tool Fusion splicing entails precisely aligning cleaved fiber ends and fusing them together. There are various alignment methods and systems available today. After the fibers have been cleaned, cleaved, and aligned, high voltage electrodes create a high temperature arc across the fiber ends as the fibers are butted together, thus fusing (melting) the two strands into one. Termination Tools Category Style Multi Pair Termination Tool Provides 4 pair high impact termination specifically for Molex 110 Style Category 6 Connector termination. Deluxe IDC Punch Down Tool Provides reliable terminations and is compatible with KATT, 110 Style and Krone IDC Connectors. A mechanical splice aligns and holds together two bare fiber ends by some mechanical means, usually compressing the fiber buffer. Like a fusion splice, the bare fibers must be cleaned, cleaved, butted together, and then locked in place. Mechanical splices are capable of low loss splice quality comparable to fusion splices, achieving losses below the TIA- 568B specification of 0.30 db. Punch-Down Terminating Puck A handy twisted pair termination aid that works with any Molex Premise Networks RJ45, including DataGate jacks and USO II modules. Simply hold the Puck in your hand, secure with attached strap and terminate. Alternatively, the Puck can be secured against any flat surface with supplied screws. Category Style Multi pair Termination Tool KPD Standard Punchdown Tool KPD Category Style Multi Pair Termination Tool with head & handle KPD Category Style Multi Pair Termination Tool Replacement Head Deluxe IDC Punch Down Tool Replacement Blade for Deluxe IDC Punch Down Tool CSP Punch Down Puck Kit- Black I SLT3 Single Line Tester The SLT3 Tester is a rugged, lightweight product designed to verify the integrity of 1, 2, 3, and 4 pair UTP channels. Incorporating a unique 3-in-1 design, this tester features built-in modular jacks for USOC, EIA 568A and 568B wiring sequences. Simply connect the master and slave unit to each end of the cable under test, and the SLT3 automatically verifies correct cable sequence, as well as open and short circuits. Innovative 3-in-1 design features modular jacks for testing USOC, EIA 568A and 568B cabling systems Accurately verifies the continuity and sequence of 1, 2, 3 and 4 pair UTP and Shielded channels Continuously-sequencing LED display provides a diagnostic read-out that immediately detects shorts, opens, reversals and mis-wires at a glance Available in UTP and Shielded versions SLT3 UTP Single Line Tester P SLT3 UTP Carry Case 33A SLT3S Shielded Tester (Master and Slave Units) with 9 Volt battery Pocket Fault Locator The Pocket Fault Locator is designed for either Singlemode or Multimode use. This pen-sized unit allows you to visually locate micro-bends, fiber breaks and other sources of optical attenuation in fiber patch cords, patch panels and enclosures. Visible 650nm laser Small pocket size design Contiguous or Modulated Light Source Singlemode or Multimode use Battery operated 2.5mm Universal Ferrule Adapter AFR Pocket Fault Locator I-1

58 Tools and Testers Xpress Termination Tool Kit Consumable Kit Xpress Termination & Economy Tool Kit Xpress Termination Tools provide consistent, high quality, reliable fiber optic terminations with Molex Xpress Termination LC, SC and ST Multimode and Single Mode connectors. No electricity is required for termination with the Xpress Termination Tools. The Economy Fiber Tool Kit contains all the tools required to prepare fiber cable prior to termination. No electricity required allowing for easy termination in any location Patented Cleave Tools provide consistent reliable cleaves Kits available for 900µm buffered fiber as well as 2mm and 3mm fiber cordage The Economy Tool kit includes; - Fiber Cleave Tool - Electrician Scissors - Jacket/Buffer Stripper Tool - Wipes Xpress Termination 900µm Fiber Connector Tool Kit Xpress Termination 900µm, 2mm, 3mm Fiber Connector Tool Kit AFR Economy Fiber Tool Kit Xpress Termination Consumables Kit Consumable Replacement Kit for FC, LC, SC and ST Connectors Consumable Replacement Kit FC/SC Wet Polish Consumable Kit for Heat Cure Epoxy Style FC, LC, SC and ST Termination Tools Spring -Loaded Polishing Puck Cleave Tool Universal Cleave Tool Crimp Tool LC Polishing Puck Xpress Termination ST Polishing Kit ST Crimp Tool Cleave Tool for ST, SC Connectors FC Crimp Tools -Includes Dies FC Crimp Die -Bottom Can be used with Crimp Die in Tool Kit FC Crimp Die -Top- Can be used with Crimp Die in Tool Kit FC Polishing Tool FC/APC Polishing Tool SC Crimp Tool SC Polishing Tool LC Cleave Tool AFR Fiber Optic Cleaver I I-2