Plug & Play AnyLAN Systems

Transcription

1 features and benefits Factory-terminated cables Watertight components with compact, rugged design Multi-fiber quick connect Factory tested Modular SPECIFICATION SHEET LAN-731-EN PAGE 1 Install with no special tools Use indoors, outdoors and for harsh environments Up and running in hours rather than days Reliable and dependable Easy, flexible configuration for many applications Plug & Play AnyLAN Direct Trunk System Photo LAN2224 Corning Cable Systems Plug & Play AnyLAN Systems are a modular set of factory-terminated components that can be easily configured into flexible point-to-point and point-to-multipoint optical links. The AnyLAN OptiTip Connector is the key enabler for quick connect of up to 12 fibers at a time. The connector is based on the field proven MTP Connector technology encapsulated in a hardened package suitable for use in any environment. A male (pinned) version and a female (non-pinned) version are easily joined to make a watertight terminal or in-line connection. Factory installation and testing ensures reliable, low optical loss on all fibers. OptiTip Connectors are used to terminate compact, rugged outdoor and indoor-outdoor rated cables to make multi-fiber direct trunk and extender trunk segments. These trunks are completed with a variety of mix and match wall-mount, rack-mount and harness breakouts to standard simplex LC, SC or ST Compatible connectors. (continued)

2 A multi-point or zone solution can be configured with the addition of Corning Cable Systems Ruggedized Zone Enclosure. This sealed, factory-terminated closure terminates a high-fiber-count cable with OptiTip Connector adapters, to which the above trunk segments can be connected. Plug & Play AnyLAN Systems are easy to design with few parts to specify and order. The components are field repairable with standard industry practices, or spares are easy to inventory for quick change out. AnyLAN Systems are a perfect choice for links where field fiber work is not desirable such as in high-bay areas, dirty, dusty, wet or muddy environments, hazardous areas or limited access areas. AnyLAN Systems are installed and up and running in hours rather than days, with no special tools, equipment or training necessary. Female OptiTip Connector (non-pinned) Photo LAN2227 Male OptiTip Connector (pinned) Photo LAN2226 OptiTip to OptiTip Connector Joint Photo LAN2225 SPECIFICATION SHEET LAN-731-EN PAGE 2

3 AnyLAN System Point-to-Point Components SPECIFICATION SHEET LAN-731-EN PAGE 3 Simple solution configuration: 1. Specify Direct Trunk see details and part numbering (page 5) 2. Specify a matching Extender Trunk(s) if needed for longer overall length (page 5) 3. Specify the Harness Assembly (page 6), Zeux Panel Assembly (page 7), Integrated Single-Panel Housing (page 8) or Integrated 1U Housing (page 9) for End 1 4. Specify the Harness Assembly (page 6), Zeux Panel Assembly (page 7), Integrated Single-Panel Housing (page 8) or Integrated 1U Housing (page 9) for End 2

4 AnyLAN System Point-to-Multipoint Components SPECIFICATION SHEET LAN-731-EN PAGE 4 Simple solution configuration: 1. Specify the Ruggedized Zone Enclosure and its cable see details and part numbering (page 7) 2. Specify the AnyLAN Breakout Modules for the MTP -Terminated Cable end (page 8) 3. Specify the Direct Trunks and Extender Trunks for each Ruggedized Zone Enclosure port (page 5) 4. Specify the Harness Assembly (page 6), Zeux Panel Assembly (page 7), Integrated Single-Panel Housing (page 8) or Integrated 1U Housing (page 9) for the end of each trunk

5 ordering information OptiTip Direct Trunk The OptiTip Direct Trunk is an outdoor or indoor/outdoor cable factory terminated with a female OptiTip MT Connector. Each connector is protected with a sealed dust cap that has an integral pulling eye. SPECIFICATION SHEET LAN-731-EN PAGE 5 Description Outdoor Application, SST-Drop Cable M1M1 EB4D1E F-P M3M3 TB4D1E F-P Single-mode OS2 fiber Multimode 50 μm OM3 fiber Indoor/Outdoor Application, FREEDM LSZH Flat-Drop Cable M1M1 EBZD1X F-P M3M3 TBZD1X F-P Single-mode OS2 fiber Multimode 50 μm OM3 fiber = Choose number of fibers: 06 or 12. = Choose overall length* in feet (maximum 2,500 ft); for example, 050 = 50 ft, 100 = 100 ft, 900 = 900 ft. For lengths from 1,000 to 2,500 feet, refer to length code table on page 11. *Length tolerance: 50 ft (-0 to +6 in); > 50 ft (-0 to +52 in). OptiTip Extender Trunk The OptiTip Extender Trunk is an outdoor or indoor/ outdoor cable factory terminated with a female OptiTip MT Connector on one end and a male OptiTip Connector on the other end. Each connector is protected with a sealed dust cap. The female dust cap has an integral pulling eye. Description Outdoor Application, SST-Drop Cable M1M2 EB4D1E F-P M3M4 TB4D1E F-P Single-mode OS2 fiber Multimode 50 μm OM3 fiber Indoor/Outdoor Application, FREEDM LSZH Flat-Drop Cable M1M2 EBZD1X F-P M3M4 TBZD1X F-P Single-mode OS2 fiber Multimode 50 μm OM3 fiber = Choose number of fibers: 06 or 12. = Choose overall length* in feet (maximum 2,500 ft); for example, 050 = 50 ft, 100 = 100 ft, 900 = 900 ft. For lengths from 1,000 to 2,500 feet, refer to length code table on page 11. *Length tolerance: 50 ft (-0 to +6 in); > 50 ft (-0 to +52 in).

6 ordering information OptiTip Harness Assembly The OptiTip Harness Assembly is an outdoor or indoor/ outdoor cable factory terminated with a male OptiTip MT Connector on one end and a furcation and breakout to LC, SC or ST Compatible single-fiber connectors, or an MTP Multi-fiber Connector, on the other end. Single-fiber connectors are terminated on 24 in long, 2.0 mm jacketed furcation legs. The MTP Connector is terminated on a 24 in long, 2.9 mm round furcation leg. SPECIFICATION SHEET LAN-731-EN PAGE 6 Description Outdoor Application, SST-Drop Cable M202 EB4D1E F-P M258 EB4D1E F-P M261 EB4D1E F-P M290 EB4D1E F-P M403 TB4D1E F-P M439 TB4D1E F-P M450 TB4D1E F-P M269 TB4D1E F-P Single-mode OS2 fiber, OptiTip to LC Single-mode OS2 fiber, OptiTip to SC Single-mode OS2 fiber, OptiTip to ST Compatible Single-mode OS2 fiber, OptiTip to MTP Multimode 50 μm OM3 fiber, OptiTip to LC Multimode 50 μm OM3 fiber, OptiTip to SC Multimode 50 μm OM3 fiber, OptiTip to ST Compatible Multimode 50 μm OM3 fiber, OptiTip to MTP Indoor/Outdoor Application, FREEDM LSZH Flat-Drop Cable M202 EBZD1X F-P M258 EBZD1X F-P M261 EBZD1X F-P M290 EBZD1X F-P M403 TBZD1X F-P M439 TBZD1X F-P M450 TBZD1X F-P M269 TBZD1X F-P Single-mode OS2 fiber, OptiTip to LC Single-mode OS2 fiber, OptiTip to SC Single-mode OS2 fiber, OptiTip to ST Compatible Single-mode OS2 fiber, OptiTip to MTP Multimode 50 μm OM3 fiber, OptiTip to LC Multimode 50 μm OM3 fiber, OptiTip to SC Multimode 50 μm OM3 fiber, OptiTip to ST Compatible Multimode 50 μm OM3 fiber, OptiTip to MTP = Choose number of fibers: 06 or 12. = Choose overall length* in feet (maximum 2,500 ft); for example, 050 = 50 ft, 100 = 100 ft, 900 = 900 ft. For lengths from 1,000 to 2,500 feet, refer to length code table on page 11. *Length tolerance: 50 ft (-0 to +6 in); > 50 ft (-0 to +52 in).

7 ordering information and specifications Zeux Panel Assembly The Zeux Panel Assembly is an outdoor or indoor/ outdoor cable factory terminated with a male OptiTip MT Connector on one end and single fiber LC, SC or ST Compatible adapters set in a compact, durable encapsulated block on the other end. The assembly is designed to terminate and breakout a 6-fiber or 12-fiber OptiTip Trunk. The Zeux Panel aluminum backplate is easily mounted in a wide variety of existing equipment housings. SPECIFICATION SHEET LAN-731-EN PAGE 7 Description Outdoor Application, SST-Drop Cable ZPM202 EB4D1E F ZPM258 EB4D1E F ZPM261 EB4D1E F ZPM403 TB4D1E F ZPM439 TB4D1E F ZPM450 TB4D1E F Single-mode OS2 fiber, OptiTip to LC Single-mode OS2 fiber, OptiTip to SC Single-mode OS2 fiber, OptiTip to ST Compatible Multimode 50 μm OM3 fiber, OptiTip to LC Multimode 50 μm OM3 fiber, OptiTip to SC Multimode 50 μm OM3 fiber, OptiTip to ST Compatible Indoor/Outdoor Application, FREEDM LSZH Flat-Drop Cable ZPM202 EBZD1X F ZPM258 EBZD1X F ZPM261 EBZD1X F ZPM403 TBZD1X F ZPM439 TBZD1X F ZPM450 TBZD1X F Single-mode OS2 fiber, OptiTip to LC Single-mode OS2 fiber, OptiTip to SC Single-mode OS2 fiber, OptiTip to ST Compatible Multimode 50 μm OM3 fiber, OptiTip to LC Multimode 50 μm OM3 fiber, OptiTip to SC Multimode 50 μm OM3 fiber, OptiTip to ST Compatible = Choose number of fibers: 06 or 12. = Choose overall length* in feet (minimum 2 ft): 002 = 2 ft 300 = 300 ft 010 = 10 ft 400 = 400 ft 025 = 25 ft 500 = 500 ft 050 = 50 ft 600 = 600 ft 100 = 100 ft 700 = 700 ft 150 = 150 ft 800 = 800 ft 200 = 200 ft 900 = 900 ft 250 = 250 ft A00 = 1,000 ft *Length tolerance: 10 ft (-0 to +24 in); > 10 ft (-0 to +76 in). Overall Dimensions inches (L x W x H) 6-fiber: 9.1 x 1.8 x 1.8; 12-fiber: 13.1 x 1.8 x 1.8 Operating Temperature -40 to +158 F (-40 to +70 C)

8 ordering information and specifications Integrated Single-Panel Housing The Integrated Single-Panel Housing is a compact, single-panel wall-mountable housing for the termination and breakout of one or two 12-fiber OptiTip Trunks. One or two male OptiTip Adapters are located on the bottom of the housing. An internal fiber harness connects to LC, SC or ST Compatible adapters on the right side panel. 24-fiber is available with LC adapters only. Overall Dimensions inches (H x W x D) 6.3 x 5.5 x 2.0 Operating Temperature SPH-12OTR-12A9H SPH-12OTR-1259H SPH-12OTR-126TH SPH-24OTR-24A9H SPH-12OTS-12E4H SPH-12OTS-12E7H SPH-12OTS-12H3H SPH-24OTS-24E4H SPECIFICATION SHEET LAN-731-EN PAGE 8 Description 14 to +140 F (-10 to +60 C) Single-mode OS2 fiber, 12-fiber OptiTip to LC Single-mode OS2 fiber, 12-fiber OptiTip to SC Single-mode OS2 fiber, 12-fiber OptiTip to ST Compatible Single-mode OS2 fiber, 24-fiber OptiTip to LC Multimode 50 μm OM3 fiber, 12-fiber OptiTip to LC Multimode 50 μm OM3 fiber, 12-fiber OptiTip to SC Multimode 50 μm OM3 fiber, 12-fiber OptiTip to ST Compatible Multimode 50 μm OM3 fiber, 24-fiber OptiTip to LC

9 ordering information and specifications Integrated 1U Housing The Integrated 1U Housing is a 1U rack-mountable housing for the termination and breakout of one to four 12-fiber OptiTip Trunks. One to four male OptiTip Adapters are located on the back of the housing. An internal fiber harness connects to LC, SC or ST Compatible adapters on the front. 36-fiber is available with SC adapters only and 48-fiber is available with LC adapters only. Overall Dimensions inches (H x W x D) 1.75 x 17.9 x 9.7 Operating Temperature CC1-12OTR-12A9H CC1-12OTR-1259H CC1-12OTR-126TH CC1-24OTR-24A9H CC1-24OTR-2459H CC1-24OTR-246TH CC1-36OTR-3659H CC1-48OTR-48A9H CC1-12OTS-12E4H CC1-12OTS-12E7H CC1-12OTS-12H3H CC1-24OTS-24E4H CC1-24OTS-24E7H CC1-24OTS-24H3H CC1-36OTS-36E7H CC1-48OTS-48E4H SPECIFICATION SHEET LAN-731-EN PAGE 9 Description 14 to +140 F (-10 to +60 C) Single-mode OS2 fiber, 12-fiber OptiTip to LC Single-mode OS2 fiber, 12-fiber OptiTip to SC Single-mode OS2 fiber, 12-fiber OptiTip to ST Compatible Single-mode OS2 fiber, 24-fiber OptiTip to LC Single-mode OS2 fiber, 24-fiber OptiTip to SC Single-mode OS2 fiber, 24-fiber OptiTip to ST Compatible Single-mode OS2 fiber, 36-fiber OptiTip to SC Single-mode OS2 fiber, 48-fiber OptiTip to LC Multimode 50 μm OM3 fiber, 12-fiber OptiTip to LC Multimode 50 μm OM3 fiber, 12-fiber OptiTip to SC Multimode 50 μm OM3 fiber, 12-fiber OptiTip to ST Compatible Multimode 50 μm OM3 fiber, 24-fiber OptiTip to LC Multimode 50 μm OM3 fiber, 24-fiber OptiTip to SC Multimode 50 μm OM3 fiber, 24-fiber OptiTip to ST Compatible Multimode 50 μm OM3 fiber 36-fiber OptiTip to SC Multimode 50 μm OM3 fiber, 48-fiber OptiTip to LC

10 ordering information and specifications Ruggedized Zone Enclosure The Ruggedized Zone Enclosure (RZE) terminates a high-fiber-count outdoor or indoor/outdoor cable on male OptiTip Adapters in a sealed, watertight closure that can be mounted in any environment to create a zone distribution point. The RZE s cable is factory terminated with standard MTP Connectors and enclosed in a rugged pulling grip for installation. The cable may also be unterminated for field termination or splicing. Overall Dimensions inches (L x H x W) 15 x 7.8 x 6.3 Operating Temperature MTP Rugged Grip Pull Tension MTP Rugged Grip Maximum Outer Diameter MTP Rugged Grip Overall Length RZP E RZP E RZP E RZP E RZP E RZP T RZP T RZP T RZP T RZP T SPECIFICATION SHEET LAN-731-EN PAGE 10 Description -40 to +158 F (-40 to +70 C) 600 lb 1.6 in (minimum recommended duct is 2 in) 54 in Single-mode OS2 fiber, 36-fiber, 6 x 6-fiber OptiTip Adapters Single-mode OS2 fiber, 48-fiber, 8 x 6-fiber OptiTip Adapters Single-mode OS2 fiber, 48-fiber, 4 x 12-fiber OptiTip Adapters Single-mode OS2 fiber, 72-fiber, 6 x 12-fiber OptiTip Adapters Single-mode OS2 fiber, 96-fiber, 8 x 12-fiber OptiTip Adapters Multimode 50 μm OM3 fiber, 36-fiber, 6 x 6-fiber OptiTip Adapters Multimode 50 μm OM3 fiber, 48-fiber, 8 x 6-fiber OptiTip Adapters Multimode 50 μm OM3 fiber, 48-fiber, 4 x 12-fiber OptiTip Adapters Multimode 50 μm OM3 fiber, 72-fiber, 6 x 12-fiber OptiTip Adapters Multimode 50 μm OM3 fiber, 96-fiber, 8 x 12-fiber OptiTip Adapters = Choose cable type: W4 = ALTOS All-Dielectric Outdoor Cable WF = FREEDM Loose Tube Indoor/Outdoor Cable, riser-rated WZ = Industrial LSZH Indoor/Outdoor Cable, tray-rated n n n = Choose overall length in feet (maximum 2,000 ft); for example, 050 = 50 ft, 100 = 100 ft, 900 = 900 ft. For lengths from 1,000 to 2,000 feet, refer to length code table on page 11. For an unterminated cable (without a rugged pulling grip), substitute 00 for 76 or 56 in the part number.

11 ordering information AnyLAN Systems Module The AnyLAN Systems module is designed to breakout a standard 12-fiber MTP Connector into LC or SC adapters. The module fits into a wide variety of Corning Cable Systems rack- and wall-mountable housings. CCH-AM G CCH-AM G CCH-AM G CCH-AM T CCH-AM T CCH-AM T SPECIFICATION SHEET LAN-731-EN PAGE 11 Description Single-mode OS2 fiber, 12-fiber OptiTip to LC Single-mode OS2 fiber, 12-fiber OptiTip to SC Single-mode OS2 fiber, 24-fiber OptiTip to LC Multimode 50 μm OM3 fiber, 12-fiber OptiTip to LC Multimode 50 μm OM3 fiber, 12-fiber OptiTip to SC Multimode 50 μm OM3 fiber, 24-fiber OptiTip to LC length code table for assembly lengths from 1,000 to 2,500 feet A00 = 1,000 ft B00 = 1,100 ft C00 = 1,200 ft D00 = 1,300 ft E00 = 1,400 ft F00 = 1,500 ft G00 = 1,600 ft H00 = 1,700 ft J00 = 1,800 ft K00 = 1,900 ft L00 = 2,000 ft M00 = 2,100 ft N00 = 2,200 ft P00 = 2,300 ft Q00 = 2,400 ft R00 = 2,500 ft

12 component specifications OptiTip MT Connectors Length Maximum Outer Diameter Mateability SPECIFICATION SHEET LAN-731-EN PAGE in female, tip to end of boot (4.07 in with dust cap installed) 3.29 in male, tip to end of boot (4.23 in with dust cap installed) 6.72 in female-male mated pair (end of boot to end of boot) 0.7 in; minimum recommended duct size is 1.25 in Pinned alignment, male to female connector or female connector to male adapter Qualification EIA/TIA 568-B.3,GR-3152, IP 69K and IP 68 Tensile strength Operating temperature Insertion loss Reflectance Durability 100 lb when factory installed on SST-Drop or FREEDM Flat-Drop Cable -40 to +70 C (-40 to +158 F) 0.65 db maximum per fiber, 0.35 db typical Multimode 50 μm OM3: -20 db; Single-mode OS2: -65 db < 0.3 db change, 200 rematings, FOTP-21 Full specifications for environmental hardiness are available upon request: Gen. Spec doc. PGS115(108) LC, SC and ST Compatible Connectors Intermateability Qualification Tensile strength Operating temperature Insertion loss Reflectance Durability TIA/EIA-568-B.3, FOCIS - TIA/EIA (LC), TIA/EIA (SC), TIA/EIA (ST Compatible) EIA/TIA 568-B db change, 15 lb FOTP-6-40 to +70 C (-40 to +158 F) 0.5 db maximum per fiber, 0.2 db typical Multimode 50 μm OM3: -20dB; Single-mode OS2: -55 db < 0.2 db change, 500 rematings, FOTP-21 (continued)

13 component specifications (continued) SST-Drop Outdoor Cable Outside diameter Minimum bend-radius Weight SPECIFICATION SHEET LAN-731-EN PAGE in x 0.17 in 3.15 in (slack storage loop minimum diameter 6.30 in) 20 lb/1,000 ft (30 kg/km) Tensile strength 300 lbf (1350 N) Compressive strength (crush) Sheath color Installation temperature Operating temperature Qualification Fiber attenuation Minimum overfilled launch (OFL) bandwidth Minimum effective modal bandwidth (EMB) 125 lbf/in (220 N/cm) Black -22 to +158 F (-30 to +70 C) -40 to +158 F (-40 to +70 C) GR-20, EIA/TIA 568-B.3, RDUP listed Multimode 50 μm OM3: 3.0/1.0 db/km; Single-mode OS2: 0.4/0.3 db/km Multimode 50 μm OM3: 1500/500 MHz km Multimode 50 μm OM3: 2000/- MHz km (continued)

14 component specifications (continued) FREEDM LSZH Flat-Drop Indoor/Outdoor Cable Outside diameter Minimum bend-radius Weight SPECIFICATION SHEET LAN-731-EN PAGE in x 0.17 in 3.15 in (slack storage loop minimum diameter 6.30 in) 31 lb/1,000 ft (46 kg/km) Tensile strength 300 lbf (1350 N) Compressive strength (crush) Sheath color Installation temperature Operating temperature Qualification 125 lbf/in (220 N/cm) Black -22 to +158 F (-30 to +70 C) -40 to +158 F (-40 to +70 C) EIA/TIA S , Telcordia GR-20 Rating NEC OFNR-LS, CSA OFN FT-4, Tray-rated per UL 13; UL 444; UL 1277; CSA C22.2 No. 230 and No. 232 Fiber attenuation Minimum overfilled launch (OFL) bandwidth Minimum effective modal bandwidth (EMB) Multimode 50 μm OM3: 3.0/1.0 db/km; Single-mode OS2: 0.4/0.3 db/km Multimode 50 μm OM3: 1500/500 MHz km Multimode 50 μm OM3: 2000/- MHz km

15 notes SPECIFICATION SHEET LAN-731-EN PAGE 15

16 notes SPECIFICATION SHEET LAN-731-EN PAGE 16 Corning Cable Systems LLC PO Box 489 Hickory, NC USA FAX: International: Corning Cable Systems reserves the right to improve, enhance and modify the features and specifications of Corning Cable Systems products without prior notification. ALTOS, FREEDM, LANscape and OptiTip are registered trademarks of Corning Cable Systems Brands, Inc. AnyLAN, LSZH, Plug & Play, SST-Drop and Zeux are trademarks of Corning Cable Systems Brands, Inc. MTP is a registered trademark of USConec, Ltd. ST is a registered trademark of Lucent Technologies. All other trademarks are the properties of their respective owners. Corning Cable Systems is ISO 9001 certified. 2008, 2011 Corning Cable Systems. All rights reserved. Published in the USA. LAN-731-EN / January 2011