Actuation and Power Electronics. Actuation and Power Electronics overview

Metrology and Calibration of Mechatronic Systems. Metrology and Calibration of Mechatronic Systems overview (v2.1) Adrian M.

Metrology and Calibration of Mechatronic Systems Mechatronics Training Curriculum Premium Workshop Mechatronics System Design Advanced Advanced Motion Control (5 days) Advanced Feedforward Control Design

MECHATRONICS LAB MANUAL

MECHATRONICS LAB MANUAL T.E.(Mechanical) Sem-VI Department of Mechanical Engineering SIESGST, Nerul, Navi Mumbai LIST OF EXPERIMENTS Expt. No. Title Page No. 1. Study of basic principles of sensing and

Power Electronics and Drives (PED)

Power Electronics and Drives (PED) Introduction Spurred on by technological progress and a steadily increasing concern about the efficient use of depleting energy resources, static power electronic converters

EPE 18 ECCE Europe: LIST OF KEYWORDS

EPE 18 ECCE Europe: LIST OF KEYWORDS AC machine AC-cable AC/AC converter Accelerators Acoustic noise Active damping Active filter Active Front-End Actuator Adaptive control Adjustable speed drive Adjustable

MASSACHUSETTS INSTITUTE OF TECHNOLOGY DEPT OF MECHANICAL ENGINEERING

MASSACHUSETTS INSTITUTE OF TECHNOLOGY DEPT OF MECHANICAL ENGINEERING 2.004 Dynamics and Control II Laboratory Note: Description of the Experimental Rotational Plant 1 INTRODUCTION In the first series of

COURSE 4-9 March, 2018 Auditorium 1003, Mayer Bld. Electrical Engineering Dept. Technion

COURSE 4-9 March, 2018 Auditorium 1003, Mayer Bld. Electrical Engineering Dept. Technion Robust Power Semiconductor IC Systems The course conveys a solid understanding of the use of modern semiconductor

Note 8. Electric Actuators

Note 8 Electric Actuators Department of Mechanical Engineering, University Of Saskatchewan, 57 Campus Drive, Saskatoon, SK S7N 5A9, Canada 1 1. Introduction In a typical closed-loop, or feedback, control

Clement A. Skalski, Ph.D., P.E.

page 1 of 5 skalskic@comcast.net 860-673-7909 (Connecticut) 941-375-2975 (Florida) 860-402-8149 (cell) EXPERTISE! Elevators! Control Systems, Transducers, and Actuators.! Induction and PM Synchronous Motors,

CHAPTER 1 INTRODUCTION

1 CHAPTER 1 INTRODUCTION 1.1 ELECTRICAL MOTOR This thesis address the performance analysis of brushless dc (BLDC) motor having new winding method in the stator for reliability requirement of electromechanical

Artificial-Intelligence-Based Electrical Machines and Drives

Artificial-Intelligence-Based Electrical Machines and Drives Application of Fuzzy, Neural, Fuzzy-Neural, and Genetic-Algorithm-Based Techniques Peter Vas Professor of Electrical Engineering University

Design and Analysis of Hydrostatic Bearing Slide Used Linear Motor Direct-drive. Guoan Hou 1, a, Tao Sun 1,b

Advanced Materials Research Vols. 211-212 (2011) pp 666-670 Online available since 2011/Feb/21 at www.scientific.net (2011) Trans Tech Publications, Switzerland doi:10.4028/www.scientific.net/amr.211-212.666

Contents. Review of Electric Circuitd. Preface ;

Preface ; Chapter 1 Review of Electric Circuitd 1.1 Introduction, 1 1.2 Direct Circuit Current, 1 1.2.1 Voltage, 3 1.2.2 Power, 3 1.2.3 Ohm's Law, 5 1.2.4 KirchhofTs Laws, 5 1.2.4.1 Kirchhoff s Current

Chapter 22. Electromagnetic Induction

Chapter 22 Electromagnetic Induction 22.1 Induced Emf and Induced Current There are a number of ways a magnetic field can be used to generate an electric current. It is the changing field that produces

Electromechanical Systems aim Devices

Electromechanical Systems aim Devices Sergey E. Lyshevski C\ CRC Press NV* I Taylor & Francis Group Boca Raton London New York CRC Press is an imprint of the Taylor & Francis Group, an informa business

Fig Electromagnetic Actuator

This type of active suspension uses linear electromagnetic motors attached to each wheel. It provides extremely fast response, and allows regeneration of power consumed by utilizing the motors as generators.

INSTITUTE OF AERONAUTICAL ENGINEERING Dundigal, Hyderabad

INSTITUTE OF AERONAUTICAL ENGINEERING Dundigal, Hyderabad - 500 043 MECHANICAL ENGINEERING ASSIGNMENT Name : Electrical and Electronics Engineering Code : A40203 Class : II B. Tech I Semester Branch :

Dr. Daho Taghezout applied magnetics (CH 1110 Morges)

EMR 11 Lausanne July 2011 Joint Summer School EMR 11 Energetic Macroscopic Representation Dr. Daho Taghezout applied magnetics (CH 1110 Morges) magnetics@bluewin.ch - Outline - EMR 11, Lausanne, July 2011

VALLIAMMAI ENGINEERING COLLEGE

VALLIAMMAI ENGINEERING COLLEGE SRM Nagar, Kattankulathur 603 203. DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING Question Bank EE6401 ELECTRICAL MACHINES I UNIT I: MAGNETIC CIRCUITS AND MAGNETIC

Modeling and Optimization of a Linear Electromagnetic Piston Pump

Fluid Power Innovation & Research Conference Minneapolis, MN October 10 12, 2016 ing and Optimization of a Linear Electromagnetic Piston Pump Paul Hogan, MS Student Mechanical Engineering, University of

Contents. Preface... xiii Introduction... xv. Chapter 1: The Systems Approach to Control and Instrumentation... 1

Contents Preface... xiii Introduction... xv Chapter 1: The Systems Approach to Control and Instrumentation... 1 Chapter Overview...1 Concept of a System...2 Block Diagram Representation of a System...3

Question Bank ( ODD)

Programme : B.E Question Bank (2016-2017ODD) Subject Semester / Branch : EE 6703 SPECIAL ELECTRICAL MACHINES : VII-EEE UNIT - 1 PART A 1. List the applications of synchronous reluctance motors. 2. Draw

Friday Midterm EXAMINATION Fall 2018 CREDIT HOURS ENGINEERING PROGRAMS AIN SHAMS UNIVERSITY FACULTY OF ENGINEERING

HUM311 Engineering Management 176 HUMN362 Engineering Management 1 14:00 16:00 224, 261 CEP 011 Engineering Drawing (2) 247 14:00 16:00 901, 901A, 902A, 902B,904, 250 Friday 9-11-2018 PHM022 Waves, Electricity,

Design, Engineering, and Manufacturing of Motors for Electric Vehicle Applications

Design, Engineering, and Manufacturing of Motors for Electric Vehicle Applications Mark Steffka Email: msteffka@ieee.org FR-AM-5 History of Electric Drives in Transportation 2 Why Use Electric Drives?

837. Dynamics of hybrid PM/EM electromagnetic valve in SI engines

837. Dynamics of hybrid PM/EM electromagnetic valve in SI engines Yaojung Shiao 1, Ly Vinh Dat 2 Department of Vehicle Engineering, National Taipei University of Technology, Taipei, Taiwan, R. O. C. E-mail:

Hybrid MEMS Proportional Pneumatic Valve Project 16HS1

Marquette University Milwaukee School of Engineering Purdue University University of California, Merced University of Illinois, Urbana-Champaign University of Minnesota Vanderbilt University Hybrid MEMS

Applied Mechatronics. Fran Marquez and Gabriel Domingues Lund, 29/11/2018. Industrial Electrical Engineering and Automation Lund University, Sweden

Applied Mechatronics Fran Marquez and Gabriel Domingues Lund, 29/11/2018 Industrial Electrical Engineering and Automation Lund University, Sweden 1. Crash course on Electrical Machines S N S N 1. Crash

ECSE-2100 Fields and Waves I Spring Project 1 Beakman s Motor

Names _ and _ Project 1 Beakman s Motor For this project, students should work in groups of two. It is permitted for groups to collaborate, but each group of two must submit a report and build the motor

Control of Wind Turbines: A data-driven approach

Control of Wind Turbines: A data-driven approach dr.ir. Jan-Willem van Wingerden March 14, 2011 1 Outline General introduction Data driven control cycle Smart rotor Visit NREL Conclusions and outlook March

Electrical Machines and Energy Systems: Overview SYED A RIZVI

Electrical Machines and Energy Systems: Overview SYED A RIZVI Electrical Machines and Energy Systems Deal with the generation, transmission & distribution, and utilization of electric power. This course

Conclusions. Fall 2010

Conclusions ECEN 2060 Fall 2010 ECEN 2060 Topics Introduction to electric power system Photovoltaic (PV) power systems Energy efficient lighting Wind power systems Hybrid and electric vehicles 2 Electric

Design and Analysis of Electromagnetic Tubular Linear Actuator for Higher Performance of Active Accelerate Pedal

Journal of Magnetics 14(4), 175-18 (9) DOI: 1.483/JMAG.9.14.4.175 Design and Analysis of Electromagnetic Tubular Linear Actuator for Higher Performance of Active Accelerate Pedal Jae-Yong Lee, Jin-Ho Kim-,

EE069: Electrical Engineering for Non-Electrical Engineers

EE069: Electrical Engineering for Non-Electrical Engineers EE069 Rev.002 CMCT COURSE OUTLINE Page 1 of 5 Training Description: This course introduces the Basic Principles of Electricity in a simple, easy

A REVIEW OF TWO WHEELER VEHICLES REAR SHOCK ABSORBER

A REVIEW OF TWO WHEELER VEHICLES REAR SHOCK ABSORBER Ganapati Somanna Vhanamane SVERI s College of Engineering Pandharpur, Solapur, India Dr. B. P. Ronge SVERI s College of Engineering Pandharpur, Solapur,

DHANALAKSHMI SRINIVASAN COLLEGE OF ENGINEERING AND TECHNOLOGY MAMALLAPURAM, CHENNAI

DHANALAKSHMI SRINIVASAN COLLEGE OF ENGINEERING AND TECHNOLOGY MAMALLAPURAM, CHENNAI -603104 DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING QUESTION BANK VII SEMESTER EE6501-Power system Analysis

TORQUE-MOTORS. as Actuators in Intake and Exhaust System. SONCEBOZ Rue Rosselet-Challandes 5 CH-2605 Sonceboz.

TORQUE-MOTORS as Actuators in Intake and Exhaust System SONCEBOZ Rue Rosselet-Challandes 5 CH-2605 Sonceboz Tel.: +41 / 32-488 11 11 Fax: +41 / 32-488 11 00 info@sonceboz.com www.sonceboz.com as Actuators

Chapter 29 Electromagnetic Induction

Chapter 29 Electromagnetic Induction Lecture by Dr. Hebin Li Goals of Chapter 29 To examine experimental evidence that a changing magnetic field induces an emf To learn how Faraday s law relates the induced

Universal Fluid Power Trainer (UFPT)

Universal Fluid Power Trainer (UFPT) Milwaukee School of Engineering Applied Technology Center TM Department of Professional Education The UFPT is a modular, smart and unique fluid power and motion control

HSC Physics. Module 9.3. Motors and. Generators

HSC Physics Module 9.3 Motors and Generators 9.3 Motors and Generators (30 indicative hours) Contextual Outline Electricity is a convenient and flexible form of energy. It can be generated and distributed

Workshop on Design and Implementation of Power Converters with EMC/EMI Modelling for Micro Grid & Electric Vehicle Applications

Workshop on Design and Implementation of Power Converters with EMC/EMI Modelling for Micro Grid & Electric Vehicle Applications 18 th - 21 st July 2018 By- Power Electronics Lab (EE Department) Indian

ST.ANNE S COLLEGE OF ENGINEERING AND TECHNOLOGY ANGUCHETTYPALAYAM, PANRUTI

ST.ANNE S COLLEGE OF ENGINEERING AND TECHNOLOGY ANGUCHETTYPALAYAM, PANRUTI 607106. QUESTION BANK DECEMBER 2017 - JUNE 2018 / EVEN SEMESTER BRANCH: EEE YR/SEM: II/IV BATCH: 2016-2020 SUB CODE/NAME: EE6401

UNIT I D.C. MACHINES PART A. 3. What are factors on which hysteresis loss? It depends on magnetic flux density, frequency & volume of the material.

EE6352-ELECTRICAL ENGINEERING AND INSTRUMENTATION UNIT I D.C. MACHINES PART A 1. What is prime mover? The basic source of mechanical power which drives the armature of the generator is called prime mover.

Modeling and Optimization of a Linear Electromagnetic Piston Pump

Fluid Power Innovation & Research Conference Minneapolis, MN October 10 12, 2016 ing and Optimization of a Linear Electromagnetic Piston Pump Paul Hogan, MS Student Mechanical Engineering, University of

IJSRD - International Journal for Scientific Research & Development Vol. 4, Issue 01, 2016 ISSN (online):

IJSRD - International Journal for Scientific Research & Development Vol. 4, Issue 1, 216 ISSN (online): 2321-613 Close Loop Speed Response of BLDC Motor using Pi Controller Patel Milan V 1 Chaudhari Pooja

The instantaneous torque is pulsating. The average value of the torque is

Problems 113 2. ω m = ω s ω r. Both stator and rotor windings carry ac currents at different frequencies and the motor runs at an asynchronous speed (ω m 6¼ ω s, ω m 6¼ ω r ). From Eq. 3.50, the torque

UNC-Charlotte's Power Engineering Teaching lab

1 UNC-Charlotte's Power Engineering Teaching lab B. Chowdhury Panel Session Title: Existing and Proposed Power Systems Laboratories for the Undergraduate Curriculum PES GM 2015 2 Outline Background - Energy

Hybrid MEMS Pneumatic Proportional Control Valve

Marquette University Milwaukee School of Engineering Purdue University University of California, Merced University of Illinois, Urbana-Champaign University of Minnesota Vanderbilt University Hybrid MEMS

Electric Machines CHARLES A. GROSS. Aubum University Auburn, Alabama, U.S.A. LßP) CRC Press Vv* / Taylor & Francis Croup. Boca Raton London New York

Electric Machines CHARLES A. GROSS Aubum University Auburn, Alabama, U.S.A. LßP) CRC Press Vv* / Taylor & Francis Croup Boca Raton London New York CRC Press is an imprint of the Taylor & Francis Group,

University of New South Wales School of Electrical Engineering & Telecommunications ELEC ELECTRIC DRIVE SYSTEMS.

Aims of this course University of New South Wales School of Electrical Engineering & Telecommunications ELEC4613 - ELECTRIC DRIVE SYSTEMS Course Outline The aim of this course is to equip students with

Free Piston Engine Based Off-Road Vehicles

Marquette University Milwaukee School of Engineering Purdue University University of California, Merced University of Illinois, Urbana-Champaign University of Minnesota Vanderbilt University Free Piston

Course Name: POWER ELECTRONICS Course Code: EE603 Credit: 4

Course Name: POWER ELECTRONICS Course Code: EE603 Credit: 4 Prerequisites: Sl. No. Subject Description Level of Study 01 Basic Electronics p n junction, Diode, BJT, MOSFET 1 st Sem, 2 nd Sem 02 Circuit

Instructor Guide. 215: Elevator: Mechanical Drive Systems Module 3: Gearless Drive Systems

PR EV IE W O N LY Instructor Guide 215: Elevator: Mechanical Drive Systems Module 3: Gearless Drive Systems Table of Contents Overview.......4 Gearless Drive Operation...8 Geared Vs. Gearless. 22 Summary..29

SYLLABUS. osmania university UNIT - I UNIT - II UNIT - III UNIT - IV CHAPTER - 1 : PRINCIPLES OF ELECTRO-MECHANICAL ENERGY CONVERSION CHAPTER - 2 :

i UNIT - I SYLLABUS osmania university UNIT - II CHAPTER - 1 : PRINCIPLES OF ELECTRO-MECHANICAL ENERGY CONVERSION Energy in Magnetic System, Field Energy and Mechanical Force, Direction of Mechanical Force

Wireless Power Transfer at VEDECOM. François COLET, Mustapha DEBBOU 77 Rue des Chantiers, Versailles, France

Wireless Power Transfer at VEDECOM François COLET, Mustapha DEBBOU 77 Rue des Chantiers, 78000 Versailles, France version 09/06/2016 OUTLINE 2 I. Introduction II. Wireless Power Transfer Charging system

Omni Series Motors. Applimotion Motors & Actuators TORQUE. Low-Profile Direct Drive Motors for the World s Machines and Robots PRODUCT DATA SHEET

TORQUE Motors & Actuators PRODUCT DATA SHEET Omni Series Motors Low-Profile Direct Drive Motors for the World s Machines and Robots The Omni Series enables OEMs to design high performance, reliable, small

Simplus

Simplus in Latin means Simple. We focus on making direct drive 1 actuators that are simple to use, plus the additional benefits of: small form factor higher performance better reliability 1 direct drive

Power Electronics & Drives [Simulink, Hardware-Open & Closed Loop]

Power Electronics & [Simulink, Hardware-Open & Closed Loop] Project code Project theme Application ISTPOW801 Estimation of Stator Resistance in Direct Torque Control Synchronous Motor ISTPOW802 Open-Loop

CHAPTER THREE DC MOTOR OVERVIEW AND MATHEMATICAL MODEL

CHAPTER THREE DC MOTOR OVERVIEW AND MATHEMATICAL MODEL 3.1 Introduction Almost every mechanical movement that we see around us is accomplished by an electric motor. Electric machines are a means of converting

Question Number: 1. (a)

Session: Summer 2008 Page: 1of 8 Question Number: 1 (a) A single winding machine cannot generate starting torque. During starting the switch connects the starting winding via the capacitor. The capacitor

ELEC 585/462 MOTOR DRIVE DYNAMICS COURSE OUTLINE & ASSESSMENT TECHNIQUES SEPT- DEC / FALL 2013 CRN 11254/11246

ELEC 585/462 MOTOR DRIVE DYNAMICS COURSE OUTLINE & ASSESSMENT TECHNIQUES SEPT- DEC / FALL 2013 CRN 11254/11246 Instructor: Office Hours: Dr. S. Nandi Days: Any time by appointment Phone: 721-8679 Location:

1.1 Block Diagram of Drive Components of Electric Drive & their functions. Power Processor / Modulator. Control. Unit

Introduction Motion control is required in large number of industrial and domestic applications like transportations, rolling mills, textile machines, fans, paper machines, pumps, washing machines, robots

SIMOTICS Active Magnetic Bearing Technology

Ingenuity for Life Driving the Digital Enterprise SIMOTICS Active Magnetic Bearing Technology Intelligent bearing technology on a proven basis Basic principle of Active Magnetic Levitation I S Electromagnet

KINGS COLLEGE OF ENGINEERING DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING QUESTION BANK

KINGS COLLEGE OF ENGINEERING DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING QUESTION BANK NAME OF THE SUBJECT: EE 1001 SPECIAL ELECTRICAL MACHINES YEAR / SEM : IV / VII UNIT- I AC COMMUTATOR MOTORS

Delivering higher efficiency in motor drive applications

Delivering higher efficiency in motor drive applications Simon Duggleby, Technical Marketing Manager, Electronics, RS Components Electric motors consume around half of all the electricity produced worldwide

Y. Lemmens, T. Benoit, J. de Boer, T. Olbrechts LMS, A Siemens Business. Real-time Mechanism and System Simulation To Support Flight Simulators

Y. Lemmens, T. Benoit, J. de Boer, T. Olbrechts LMS, A Siemens Business Real-time Mechanism and System Simulation To Support Flight Simulators Smarter decisions, better products. Contents Introduction

B.E-EEE(Marine) Batch 7. Subject Code EE1704 Subject Name Special Electrical Machines

Course B.E-EEE(Marine) Batch 7 Semester VII Subject Code EE1704 Subject Name Special Electrical Machines Part-A Unit-1 1 List the applications of synchronous reluctance motors. 2 Draw the voltage and torque

LINEAR MOTORS. Technology of linear motors

LINEAR MOTORS Since linear motors do not have any gear unit it is more simple converting motion in electrical drives. Combined with magnet floating technology an absolutely contact-less and so a wear resistant

Frameless Torque Motor Series

Frameless Torque Motor Series QUALITY AND SERVICE DELIVERED WORLDWIDE [ TECNOTION ] Tecnotion is the global authority on direct drive motor technology. We are the world s only unbundled manufacturer of

CHAPTER 1. Introduction and Literature Review

CHAPTER 1 Introduction and Literature Review 1.1 Introduction The Active Magnetic Bearing (AMB) is a device that uses electromagnetic forces to support a rotor without mechanical contact. The AMB offers

Designing with SiC & GaN devices with Emphasis on EMC & Safety considerations

Designing with SiC & GaN devices with Emphasis on EMC & Safety considerations Dr. Supratim Basu, Prof. Tore Undeland & Prof. Jorma Kyyrä Seminar Presentation Time: Full day Seminar Presentation Abstract:

AC Motors vs DC Motors. DC Motors. DC Motor Classification ... Prof. Dr. M. Zahurul Haq

AC Motors vs DC Motors DC Motors Prof. Dr. M. Zahurul Haq http://teacher.buet.ac.bd/zahurul/ Department of Mechanical Engineering Bangladesh University of Engineering & Technology ME 6401: Advanced Mechatronics

Electromechanical Energy Conservation By Ashfaq Hussain

Electromechanical Energy Conservation By Ashfaq Hussain We have made it easy for you to find a PDF Ebooks without any digging. And by having access to our ebooks online or by storing it on your computer,

Vehicle Electrical Systems Integration

Vehicle Electrical Systems Integration Aim: Reduce cost, size and improve reliability of the electrical power systems by integration of functionality in Automotive applications Low TRL level to support

MULTIOPERATIONAL ELECTROMAGNETIC FORMING MACHINE

MULTIOPERATIONAL ELECTROMAGNETIC FORMING MACHINE Abhishek Rane 1, Ghanshyam Pendurkar 2, Tejas Phage 3, Aniket natalkar 4, Ganesh Pednekar 5 1 Professor, SSPM s college of engineering, Kanakavli, Maharashtra,

G Prasad 1, Venkateswara Reddy M 2, Dr. P V N Prasad 3, Dr. G Tulasi Ram Das 4

Speed control of Brushless DC motor with DSP controller using Matlab G Prasad 1, Venkateswara Reddy M 2, Dr. P V N Prasad 3, Dr. G Tulasi Ram Das 4 1 Department of Electrical and Electronics Engineering,

ELECTRICAL TECHNOLOGY 3 March 2008

I. Course Description ELECTRICAL TECHNOLOGY 3 March 2008 The purpose for this course is to instruct potential electricians in the skills necessary for entry into the job market. During this course, the

Brushless dc motor (BLDC) BLDC motor control & drives

Brushless dc motor (BLDC) BLDC motor control & drives Asst. Prof. Dr. Mongkol Konghirun Department of Electrical Engineering King Mongkut s University of Technology Thonburi Contents Brushless dc (BLDC)

Frameless High Torque Motors. Product Brochure

Frameless High Torque Motors Product Brochure Magnetic Innovations high torque motors are the right motors for your systems High dynamics High torque density High efficiency Optimal speed control High

ME2EE - Electrical Machines II

Coordinating unit: Teaching unit: Academic year: Degree: ECTS credits: 2017 295 - EEBE - Barcelona East School of Engineering 709 - EE - Department of Electrical Engineering BACHELOR'S DEGREE IN ELECTRICAL

LMS Imagine.Lab AMESim Electromechanical

LMS Imagine.Lab AMESim Electromechanical LMS Imagine.Lab Electromechanical LMS Imagine.Lab Electromechanical helps engineers define straightforward strategies throughout the design process of electrical

EE6352-ELECTRICAL ENGINEERING AND INSTRUMENTATION UNIT I D.C. MACHINES PART A

EE6352-ELECTRICAL ENGINEERING AND INSTRUMENTATION 1. What is prime mover? UNIT I D.C. MACHINES PART A The basic source of mechanical power which drives the armature of the generator is called prime mover.

CURRICULUM BOSCH-REXROTH (CENTRE OF EXCELLENCE) GANPAT UNIVERSITY

ANNEXURE - A CURRICULUM BOSCH-REXROTH (CENTRE OF EXCELLENCE) Host Institute: GANPAT UNIVERSITY Contents of Basic Industrial Pneumatics -----------------------------------------------------------------------------------------------------------------

ACOCAR active suspension

ACOCAR active suspension Bert Vandersmissen Vehicle Dynamics Expo Stuttgart, 07/05/2008 Contents Introduction Active suspension hardware Quarter car test rig Skyhook quarter car control Experimental skyhook

Mechatronics systems

Mechatronics systems www.matrixtsl.com 1 HP4550 Solution Description This solution contains products from our Locktronics, E-blocks and Automatics ranges. The pack includes a wide variety of resources

Danyal Education (Contact: ) A commitment to teach and nurture. c) sketch a graph of voltage output against time for a simple a.c.

(Contact: 9855 9224) Electricity and Magnetism: Electromagnetic Induction (*) (#) Candidates should be able to: a) deduce from Faraday s experiments on electromagnetic induction or other appropriate experiments:

SINGLE-ACTING ACTUATORS FOR DOUBLE-ACTING & SERIES 65 POSITIONERS PNEUMATIC & ELECTRO-PNEUMATIC. The High Performance Company

POSITIONERS PNEUMATIC & SERIES 65 FOR DOUBLE-ACTING & SINGLE-ACTING ACTUATORS The High Performance Company SERIES 65 FEATURES The Brayline Series 65Pneumatic and Electro-Pneumatic Positioner feature modular

FARADAY S LAW ELECTROMAGNETIC INDUCTION

FARADAY S LAW ELECTROMAGNETIC INDUCTION magnetic flux density, magnetic field strength, -field, magnetic induction [tesla T] magnetic flux [weber Wb or T.m 2 ] A area [m 2 ] battery back t T f angle between

Senior Project Ideas

2006 2007 Senior Project Ideas Prof. Raghu Agarwal (ragarwal@sjsu.edu) 924-3845 Title Team Skills Needed Funding 1 Human Powered Vehicle 4-6 Hands-on Self 2 SAE Formula 1 Car 4-6 Hands-on Self 3 Minibaja

Visions for Power Electronics in Automotive Applications

Visions for Power Electronics in Automotive Applications Fraunhofer-Institut für Integrierte Systeme und Bauelementetechnologie, Schottkystrasse 10 91058 Erlangen Tel. 09131/761-139, Fax -312 www.iisb.fraunhofer.de

4. Electromechanical Systems. Karadeniz Technical University Department of Electrical and Electronics Engineering Trabzon, Turkey.

Karadeniz Technical University Department of Electrical and Electronics Engineering 61080 Trabzon, Turkey Chapter 3-4-1 Modelling of Physical Systems 4. Electromechanical Systems Bu ders notları sadece

EE6401 ELECTRICAL MACHINES I UNIT I: MAGNETIC CIRCUITS AND MAGNETIC MATERIALS PART: A 1. Define EMF and MMF. 2. Name the main magnetic quantities with their symbols having the following units: Webers,

Articulation Course Guide and High School Teacher Requirements

Articulation Course Guide and High School Teacher Requirements This document outlines courses approved by FV for high school articulation consideration along with teacher qualification and certification

GUI Customization with Abaqus. Abaqus 2017

GUI Customization with Abaqus Abaqus 2017 About this Course Course objectives The goal of this course is to train you to use the Abaqus GUI Toolkit to customize the Abaqus/CAE interface or build your own

Electro - Hydraulics. & Pneumatics. Electro Hydraulic Press. Comparison. Electro Hydraulics. By: Alireza Safikhani

Electro - 9 Hydraulics & Pneumatics 2 Electro Hydraulic Press The hydraulic press is controlled via the electrical control panel. Electrical signals are used to activate the valves in the hydraulic installation.

Javelin Series Motors

IRONLESS Applimotion Motors & Actuators PRODUCT DATA SHEET Javelin Series Motors Low-Profile Linear Motors for the World s Machines and Robots The Javelin Series enables OEMs to design high performance,

Permanent magnet machines and actuators

Permanent magnet machines and actuators Geraint Jewell The University of Sheffield Symposium on Materials for a Sustainable Future 11/09/09 1 Key PM Properties for Electro-Mechanical Devices High remanence

Introduction to Internet of Things Prof. Sudip Misra Department of Computer Science & Engineering Indian Institute of Technology, Kharagpur

Introduction to Internet of Things Prof. Sudip Misra Department of Computer Science & Engineering Indian Institute of Technology, Kharagpur Lecture 04 Actuation So, this particular lecture is on actuation.

PROCEEDINGS. High Tech in Heavy Haul

PROCEEDINGS International Heavy Haul Conference Specialist Technical Session Kiruna, Sweden June 11-13, 2007 High Tech in Heavy Haul International Heavy Haul Association Hosted by: Conference Sponsors:

GUJARAT TECHNOLOGICAL UNIVERSITY, AHMEDABAD, GUJARAT. Course Curriculum. D C MACHINES AND TRANSFORMERS (Code: ) Electrical Engineering

GUJARAT TECHNOLOGICAL UNIVERSITY, AHMEDABAD, GUJARAT Course Curriculum D C MACHINES AND TRANSFORMERS (Code: 3330902) Diploma Programme in which this course is offered Semester in which offered Electrical

A New Low-Cost Hybrid Switched Reluctance Motor for Adjustable-Speed Pump Applications

A New Low-Cost Hybrid Switched Reluctance Motor for Adjustable-Speed Pump Applications K. Y. Lu, P. O. Rasmussen, S. J. Watkins, F. Blaabjerg Institute of Energy Technology Aalborg University DK-922 Aalborg

Lecture PowerPoints. Chapter 21 Physics: Principles with Applications, 7th edition, Global Edition Giancoli

Lecture PowerPoints Chapter 21 Physics: Principles with Applications, 7th edition, Global Edition Giancoli This work is provided solely for the use of instructors in teaching their courses and assessing