Dr. Daho Taghezout applied magnetics (CH 1110 Morges)
|
|
- Gordon Fleming
- 5 years ago
- Views:
Transcription
1 EMR 11 Lausanne July 2011 Joint Summer School EMR 11 Energetic Macroscopic Representation Dr. Daho Taghezout applied magnetics (CH 1110 Morges)
2 - Outline - EMR 11, Lausanne, July Section 1 Portunus simulation technology Description languages Standard libraries Links 2. Section 2 Prius II simulation EMR Description of an EV Conclusion
3 System simulation vs. Component design EMR 11, Lausanne, July " Developed by adapted solutions GmbH ( in Chemnitz (D) since 2003 System simulation vs. component design Where is the borderline? The differences between system simulation and component design tools are mainly in the modeling flexibility, the abstraction level of the model set and the adaptation of a software to particular applications. Numerical algorithms are often very similar.
4 Portunus Simulation Technology EMR 11, Lausanne, July " Analysis types Transient, OP, DC, AC " Combination of analogue and digital solvers " Ability to solve highly nonlinear systems (DAE) / Switched systems " Adaptive step-size control " Multi-simulation support
5 AP Drive System EMC EMR 11, Lausanne, July " Complex system including cables, transformers, rectifiers and load " The schematic contains signal processing elements. More than 100 models 42 s for 200 ms simulation time
6 GUI Overview (Standard Interface) EMR 11, Lausanne, July " Component-specific input dialogs (wizards) " Versatile online-displays " Symbol animation " Parameter Variation " Drag and drop from library 6
7 GUI Overview (Multiple Paging) EMR 11, Lausanne, July " Handling of subsystems " Library management " User interaction " Replay mode " Multiple pages
8 Subsheets and User Libraries " Subsheet models can be stored within libraries. EMR 11, Lausanne, July " The library management allows the modification of symbols and model behavior. " Other models types supported by the library management are - Models coded in C++ - Spice net lists - VHDL-AMS models Parameter Editor Symbol Editor Subsheet Editor
9 EMR 11 Lausanne July 2011 Joint Summer School EMR 11 Energetic Macroscopic Representation
10 Multiple Approaches for System Description EMR 11, Lausanne, July Network (electrical, thermal ) State Machine Block Diagram C++ (DLL) Text Input (VHDL-AMS / SPICE) Tables (time-dependent, characteristic) All model types can be used in a single schematic and coupled via conservative or non conservative nodes.
11 Electrical Circuits and Petri Nets 11
12 Functional Description 12
13 VHDL-AMS " VHDL-AMS is a standardized (IEEE) modeling language for the description of analogue, digital and mixed-signal systems. It is supported by several simulation systems which allows for the exchange of simulation models. 13 " In Portunus, VHDL-AMS models can be defined directly at the schematic (using the editor integrated in the wizard). This editor supports file import / export and provides syntax coloring as well as syntax check. " Alternatively, VHDL-AMS models can be inserted into user libraries. All library functions are available for VHDL-AMS models as well.
14 VHDL-AMS 14 Modelling languages like VHDL-AMS do not only provide the possibility of an efficient model exchange between simulation software tools. In many cases the use of the language leads to models that are much more compact than in the case of a graphical representation. Functional description Single phase transformer v1 == i1*r1 + psi1'dot; v2 == i2*r2 + psi2'dot; psi1 == i1*ls1 + i1*lm - i2*lm*ue; psi2 == i2*ls2 + i2*lm*ue*ue - i1*lm*ue; VHDL-AMS
15 EMR 11 Lausanne July 2011 Joint Summer School EMR 11 Energetic Macroscopic Representation
16 Standard Model Set 16 The standard library comprise a number of simulation models for electrical, mechanical and magnetic systems, block diagrams, state machines and signal analysis. The SPICE library provides mainly the semiconductor models according to SPICE 3F5. The model set can be expanded by the free VHDL-AMS models and SPICE net lists available on the internet.
17 Power Electronics Library 17 The Power Electronics Library comprises complex models for the simulation of power electronic systems. It features a modular approach by providing circuit topologies and control algorithms in separate modules.
18 Power Electronics Library 18 Application Example Induction Machine Control using a Three-Level Inverter
19 Magnetic Models 19 Models of magnetic components makes it possible to have a detailed look at the values of magnetic circuits.
20 Thermal Library 20 The Thermal Library provides a set of sophisticated models to calculate heat transfer and heat storage. Powerful wizards support the calculation of heat transfer components from geometry data. Full parameter variation by using variables is possible.
21 EMR 11 Lausanne July 2011 Joint Summer School EMR 11 Energetic Macroscopic Representation
22 Co-simulation with FLUX (FEM Analysis). 22 FLUX is a finite element software application used for electromagnetic and thermal modeling. " Applications Magnetic, electric and thermal fields, Static, harmonic and transient states, Magnetothermal and dielectrothermal coupling, External circuit connection, Mechanical coupling in rotation and translation " Development by GE2Lab (INPG Grenoble) and CEDRAT (F)
23 BLDC Motor Control 23 Most accurate model for the PMSM motor (saturation, losses in conductive regions, non sinusoidal back emf voltage, cogging torque, )
24 Co-Simulation with Matlab/Simulink 24 " The coupling to Matlab/Simulink allows for a very comfortable setting up of a coupled simulation. The definition of the signal exchange is supported by GUI functions realizing a continuous communication between Portunus and Simulink. " A coupled simulation can be started in Portunus as well as in Simulink by a single mouse click. Co-Simulation may be used for multi-simulations defined in Portunus as well as simulation batches controlled by a script.
25 EMR 11 Lausanne July 2011 Joint Summer School EMR 11 Energetic Macroscopic Representation
26 Structural Simulation of the Prius II Drive in Portunus 26 Application Automotive System description Complex mechatronic system Power electronics Electrical machines Thermal engine Mechanical elements Control/Drive Goal Behavioral simulation of the car Test on a UE speed cycle Estimation of efficiency data (battery, fuel consumption)
27 Elements: Battery Power control Power electronics Control / drive Electrical Motor/generator Thermal engine Planetary gear Mechanics Structure of the Prius Hybrid Drive UPS Boost converter 27
28 Structure of the Prius II Hybrid Car Drive 28 Parallel / Serial Hybridation of the Toyota Prius II Relation of Willis Advantages of the serial and parallel hybrid systems Allows to use the thermal engine at maximum efficiency point
29 Battery Behavioral Simulation of the Prius II in Portunus Power electronics Electrical motor And generator Mechanics 29 Control / Drive Thermal engine
30 Speed Cycle and Electromechanical Converters Speed 30
31 Battery load and thermal motor consumption 31
32 EMR Description of an EV in SIMULINK 32
33 EMR Implementation of an EV in Portunus 33
34 Speed and armature current in Portunus 34 Reference and actual speed vs. time Armature current vs. time
35 Advantages of the multiple language structural approach Behavioral model of a complex system Description ways adapted to the complexity of the different domains of the drive Electric circuits Bloc diagrams User Components (C/C++ or VHDL-AMS) State graphs Conclusion Magnetic and thermal components Data from measurements (tables) 35 Benefits of multiple language description for the EMR method Tackle various physical domains with adapted mode of representation (electrical, mechanical, thermal, hydraulic, control / drive...) More intuitive representation of physical phenomena Enhanced accuracy
MBD solution covering from system design to verification by real-time simulation for automotive systems. Kosuke KONISHI, IDAJ Co., LTD.
MBD solution covering from system design to verification by real-time simulation for automotive systems Kosuke KONISHI, IDAJ Co., LTD. Agenda System/Component model designs to validation Needs of co-simulation
More informationFinite Element Based, FPGA-Implemented Electric Machine Model for Hardware-in-the-Loop (HIL) Simulation
Finite Element Based, FPGA-Implemented Electric Machine Model for Hardware-in-the-Loop (HIL) Simulation Leveraging Simulation for Hybrid and Electric Powertrain Design in the Automotive, Presentation Agenda
More informationThe use of Simulation in Electric Machine Design Stefan Holst, CD-adapco
The use of Simulation in Electric Machine Design Stefan Holst, CD-adapco Motivation How often can a machine be started within an hour In Hybrids, what effect has the adjacent combustion drive train Space
More information«Modelling and EMR of a Hybrid Elevator»
EMR 12 Madrid June 2012 Joint Summer School EMR 12 Energetic Macroscopic Representation «Modelling and EMR of a Hybrid Elevator» Dr. Philippe Barrade LEI, Ecole Polytechnique Fédérale de Lausanne, Suisse
More informationEnd-To-End Cell Pack System Solution: Rechargeable Lithium-Ion Battery
White Paper End-To-End Cell Pack System Solution: Industry has become more interested in developing optimal energy storage systems as a result of increasing gasoline prices and environmental concerns.
More informationLMS Imagine.Lab AMESim Electromechanical
LMS Imagine.Lab AMESim Electromechanical LMS Imagine.Lab Electromechanical LMS Imagine.Lab Electromechanical helps engineers define straightforward strategies throughout the design process of electrical
More informationProper Modeling of Integrated Vehicle Systems
Proper Modeling of Integrated Vehicle Systems Geoff Rideout Graduate Student Research Assistant Automated Modeling Laboratory University of Michigan Modeling of Integrated Vehicle Powertrain Systems 1
More informationSimscape Getting Started Guide. R2014a
Simscape Getting Started Guide R2014a How to Contact MathWorks www.mathworks.com Web comp.soft-sys.matlab Newsgroup www.mathworks.com/contact_ts.html Technical Support suggest@mathworks.com bugs@mathworks.com
More informationAspects of Permanent Magnet Machine Design
Aspects of Permanent Magnet Machine Design Christine Ross February 7, 2011 Grainger Center for Electric Machinery and Electromechanics Outline Permanent Magnet (PM) Machine Fundamentals Motivation and
More informationELECTRICAL MACHINES LAB.
ﺟﺎﻣﻌﺔ ﺟﺎزان ﻛﻠــﯿﺔ اﻟﮭﻨﺪﺳﺔ ﻗﺴــﻢ اﻟﮭﻨﺪﺳﺔ اﻟﻜﮭﺮﺑﺎﺋﯿﺔ Jazan University Engineering College Electrical Engineering Department ﻣﻌﻤﻞ اﻵﻻت اﻟﻜﮭﺮﺑﺎﺋﯿﺔ ELECTRICAL MACHINES LAB. ھﻨﺪﺳﺔ ﻛﮭﺮﺑﺎﺋﯿﺔ - 421 ھﻜﮫ : اﻟﻤﻘﺮر
More informationFive Cool Things You Can Do With Powertrain Blockset The MathWorks, Inc. 1
Five Cool Things You Can Do With Powertrain Blockset Mike Sasena, PhD Automotive Product Manager 2017 The MathWorks, Inc. 1 FTP75 Simulation 2 Powertrain Blockset Value Proposition Perform fuel economy
More informationANSYS for Hybrid Electrical Vehicles- Case Studies Xiao Hu Lead Technical Services Engineer ANSYS Inc
ANSYS for Hybrid Electrical Vehicles- Case Studies Xiao Hu Lead Technical Services Engineer ANSYS Inc 1 ANSYS, Inc. September 14, Introdcution Battery Inverter Electric Machine Mechanic Load Controls HEV/EV
More informationBalancing operability and fuel efficiency in the truck and bus industry
Balancing operability and fuel efficiency in the truck and bus industry Realize innovation. Agenda The truck and bus industry is evolving Model-based systems engineering for truck and bus The voice of
More informationMultibody Dynamics Simulations with Abaqus from SIMULIA
Multibody Dynamics Simulations with Abaqus from SIMULIA 8.5.2008 Martin Kuessner Martin.KUESSNER@3ds.com Abaqus Deutschland GmbH 2 One Company, First Class Brands 3D MCAD Virtual Product Virtual Testing
More informationModelling and Simulation Specialists
Modelling and Simulation Specialists Multi-Domain Simulation of Hybrid Vehicles Multiphysics Simulation for Autosport / Motorsport Applications Seminar UK Magnetics Society Claytex Services Limited Software,
More informationModeling and Simulation throughout the Design Process of an Electrified Powertrain
odeling and Simulation throughout the esign Process of an Electrified Powertrain arkus Andres Thomas Schmitt Stephan iehl odelon GmbH unich, Germany "Tag der echatronik" 2014 arkus Andres Td 2014 1 / 17
More informationMachine Design Optimization Based on Finite Element Analysis using
Machine Design Optimization Based on Finite Element Analysis using High-Throughput Computing Wenying Jiang T.M. Jahns T.A. Lipo WEMPEC Y. Suzuki W. Taylor. JSOL Corp. UW-Madison, CS Dept. 07/10/2014 2014
More informationelektronik Designing vehicle power nets A single simulation tool from initial requirements to series production
www.atzonline.de elektronik 04 April 2013 Volume 8 Offprint from ATZelektronik 4/2013 Springer Automotive Media Springer Fachmedien Wiesbaden GmbH for Bosch Engineering Designing vehicle power nets A single
More informationTUTORIAL 1 : SIMSEN OVERVIEW. Table of contents
SIMSEN 2.3 : Modular SImulation software for the analysis of ENergy conversion Systems 22 TUTORIAL : SIMSEN OVERVIEW Table of contents page Introduction...2 2 Application fields...2 2. Electrical power
More informationo applied to the motor., 0, and Vo
Induction Motor and Drive Performance 1 Induction Motor Drivee Performance Introduction Over the past few years there have been great improvements in power electronics and their uses in motor drives. Today,
More informationThermal Analysis of Shell and Tube Heat Exchanger Using Different Fin Cross Section
Thermal Analysis of Shell and Tube Heat Exchanger Using Different Fin Cross Section J. Heeraman M.Tech -Thermal Engineering Department of Mechanical Engineering Ellenki College of Engineering & Technology
More informationFull Vehicle Durability Prediction Using Co-simulation Between Implicit & Explicit Finite Element Solvers
Full Vehicle Durability Prediction Using Co-simulation Between Implicit & Explicit Finite Element Solvers SIMULIA Great Lakes Regional User Meeting Oct 12, 2011 Victor Oancea Member of SIMULIA CTO Office
More informationMulti-disciplinary Design of Alternative Drivetrains an Integrated Approach for Simulation and Validation
Multi-disciplinary Design of Alternative Drivetrains an Integrated Approach for Simulation and Validation Univ.-Doz. Dr. Daniel Watzenig, Divisional Director E/E Kompetenzzentrum Das Virtuelle Fahrzeug
More informationDr. Philippe Barrade LEI, Ecole Polytechnique Fédérale de Lausanne, Suisse ** L2EP, University Lille1, France
Technical University of Graz, April 2012 «Energy Management of elevators using Energetic Macroscopic Representation» Dr. Philippe Barrade LEI, Ecole Polytechnique Fédérale de Lausanne, Suisse ** L2EP,
More informationSPEED AND TORQUE CONTROL OF AN INDUCTION MOTOR WITH ANN BASED DTC
SPEED AND TORQUE CONTROL OF AN INDUCTION MOTOR WITH ANN BASED DTC Fatih Korkmaz Department of Electric-Electronic Engineering, Çankırı Karatekin University, Uluyazı Kampüsü, Çankırı, Turkey ABSTRACT Due
More informationChapter 1: Battery management: State of charge
Chapter 1: Battery management: State of charge Since the mobility need of the people, portable energy is one of the most important development fields nowadays. There are many types of portable energy device
More informationG Prasad 1, Venkateswara Reddy M 2, Dr. P V N Prasad 3, Dr. G Tulasi Ram Das 4
Speed control of Brushless DC motor with DSP controller using Matlab G Prasad 1, Venkateswara Reddy M 2, Dr. P V N Prasad 3, Dr. G Tulasi Ram Das 4 1 Department of Electrical and Electronics Engineering,
More informationHybrid Vehicle Model Development using ASM- AMESim-Simscape Co-Simulation for Real-Time HIL Applications
Hybrid Vehicle Model Development using ASM- AMESim-Simscape Co-Simulation for Real-Time HIL Applications 2012-01-0932 Published 04/16/2012 Kunal Patil Texas Tech. University Sisay Kefyalew Molla dspace
More informationA Comparative Analysis of Speed Control Techniques of Dc Motor Based on Thyristors
International Journal of Engineering and Technology Volume 6 No.7, July, 2016 A Comparative Analysis of Speed Control Techniques of Dc Motor Based on Thyristors Nwosu A.W 1 and Nwanoro, G. C 2 1 National
More informationBuilding Fast and Accurate Powertrain Models for System and Control Development
Building Fast and Accurate Powertrain Models for System and Control Development Prasanna Deshpande 2015 The MathWorks, Inc. 1 Challenges for the Powertrain Engineering Teams How to design and test vehicle
More informationChengbin Ma. Energy aware control, Vehicle dynamic control
Chengbin Ma Background: Motion Control and Mechatronics Area: EV motor and motion control Energy aware control, Vehicle dynamic control Employment: Aug. 2008-Pre: Assistant Prof., UM-SJTU Joint Institute;
More informationTUTORIAL Motor Control Design Suite
TUTORIAL Motor Control Design Suite April 2017 1 The Motor Control Design Suite provides a total solution for motor drive system design. From system specifications, the Motor Control Design Suite automatically
More information«electricity & Vehicles» PLATFORM
EMR 17 International Summer School 20 th June 2017 «electricity & Vehicles» PLATFORM electricity & Vehicles 2 electricity & Vehicles National Position MEGEVH NETWORK 3 (Energetic Modelling and Energy Management
More informationPermanent Magnet Synchronous Motor. High Efficiency Industrial Motors
VoltPro is a new industrial motor range to meet high efficiency needs of industry by higher level of IE4 efficiency class. Main advantage of this product is cost effective solution ensured by using standard
More informationElectromagnetic and Thermal Modeling of a Permanent Magnet Synchronous Machine with Either a Laminated or SMC Stator
Electromagnetic and Thermal Modeling of a Permanent Magnet Synchronous Machine with Either a Laminated or SMC Stator David K. Farnia Burgess Norton Mfg. Geneva, IL 60134 dkfarnia@burgessnorton.com Tetsuya
More informationForced vibration frequency response for a permanent magnetic planetary gear
Forced vibration frequency response for a permanent magnetic planetary gear Xuejun Zhu 1, Xiuhong Hao 2, Minggui Qu 3 1 Hebei Provincial Key Laboratory of Parallel Robot and Mechatronic System, Yanshan
More informationFull Vehicle Simulation for Electrification and Automated Driving Applications
Full Vehicle Simulation for Electrification and Automated Driving Applications Vijayalayan R & Prasanna Deshpande Control Design Application Engineering 2015 The MathWorks, Inc. 1 Key Trends in Automotive
More informationModel-Based Design and Hardware-in-the-Loop Simulation for Clean Vehicles Bo Chen, Ph.D.
Model-Based Design and Hardware-in-the-Loop Simulation for Clean Vehicles Bo Chen, Ph.D. Dave House Associate Professor of Mechanical Engineering and Electrical Engineering Department of Mechanical Engineering
More informationSimulation of Indirect Field Oriented Control of Induction Machine in Hybrid Electrical Vehicle with MATLAB Simulink
Simulation of Indirect Field Oriented Control of Induction Machine in Hybrid Electrical Vehicle with MATLAB Simulink Kohan Sal Lotf Abad S., Hew W. P. Department of Electrical Engineering, Faculty of Engineering,
More informationSTORAGE SYSTEM PV APPLICATIONS
Technical University of Graz, April 2012 «Modelling and control using Energetic Macroscopic Representation» «EMR AND INVERSION-BASED CONTROL OF A HYBRID STORAGE SYSTEM PV APPLICATIONS» FOR PV A I. M. Garcia-Herreros,
More informationCrankcase scavenging.
Software for engine simulation and optimization www.diesel-rk.bmstu.ru The full cycle thermodynamic engine simulation software DIESEL-RK is designed for simulating and optimizing working processes of two-
More informationSME S.p.A. Via della Tecnica, n Arzignano (VI) - ITALY Phone:+39 (0444) Fax: +39 (0444)
AC Induction Motor Controller DATASHEET (Rev. 1.4: April 2015) SME S.p.A. Via della Tecnica, n 40 36071 Arzignano (VI) - ITALY Phone:+39 (0444) 470511 Fax: +39 (0444) 451803 www.grupposme.com Model AC-M1
More informationBonded versus Sintered Interior PM Motor for Electric and Hybrid Vehicles
! "# " Bonded versus Sintered Interior PM Motor for Electric and Hybrid Vehicles A. FONSECA and Ch. CHILLET ICEM 2002, Brugge, Belgium, August 2002 $ # Objective Comparison of Bonded and Sintered IPM Motor
More informationThermal Analysis of Electric Machines Motor-CAD
Thermal Analysis of Electric Machines Motor-CAD Create, Design, Engineer! Brief Look at MotorCAD geometry input using dedicated editors select materials, cooling options All difficult heat transfer data
More informationInternational Journal of Advance Research in Engineering, Science & Technology
Impact Factor (SJIF): 4.542 International Journal of Advance Research in Engineering, Science & Technology e-issn: 2393-9877, p-issn: 2394-2444 Volume 4, Issue 4, April-2017 Simulation and Analysis for
More informationNext-generation Inverter Technology for Environmentally Conscious Vehicles
Hitachi Review Vol. 61 (2012), No. 6 254 Next-generation Inverter Technology for Environmentally Conscious Vehicles Kinya Nakatsu Hideyo Suzuki Atsuo Nishihara Koji Sasaki OVERVIEW: Realizing a sustainable
More informationSystem Modeling and Simulation
System Modeling and Simulation Trends and Enablers for Electrified Vehicle Systems Kazuhiro Kawamura ANSYS Japan 1 2014 ANSYS, Inc. October 7, 2014 Agenda 1. Today s Electrified Vehicle Systems Motivations
More informationComparing FEM Transfer Matrix Simulated Compressor Plenum Pressure Pulsations to Measured Pressure Pulsations and to CFD Results
Purdue University Purdue e-pubs International Compressor Engineering Conference School of Mechanical Engineering 2012 Comparing FEM Transfer Matrix Simulated Compressor Plenum Pressure Pulsations to Measured
More informationDevelopment of a Multibody Systems Model for Investigation of the Effects of Hybrid Electric Vehicle Powertrains on Vehicle Dynamics.
Development of a Multibody Systems Model for Investigation of the Effects of Hybrid Electric Vehicle Powertrains on Vehicle Dynamics. http://dx.doi.org/10.3991/ijoe.v11i6.5033 Matthew Bastin* and R Peter
More informationDr. Tony LETROUVE, Dr. Julien POUGET SNCF Innovation & Research Dep., MEGEVH network,
EMR 15 Lille June 15 Summer School EMR 15 Energetic Macroscopic Representation Hardware-In In-the the-loop simulation : hybrid locomotive Energy Storage System behavior tests Dr. Tony LETROUVE, Dr. Julien
More information66RHMLPD ([DPSOHVRIXVDJHDQGVSUHDGRI'\PROD ZLWKLQ7R\RWD 0RGHOLFD:RUNVKRS3URFHHGLQJVSS
66RHMLPD ([DPSOHVRIXVDJHDQGVSUHDGRI'\PROD ZLWKLQ7R\RWD 0RGHOLFD:RUNVKRS3URFHHGLQJVSS 3DSHUSUHVHQWHGDWWKH0RGHOLFD:RUNVKRS2FW/XQG6ZHGHQ $OOSDSHUVRIWKLVZRUNVKRSFDQEHGRZQORDGHGIURP KWWSZZZ0RGHOLFDRUJPRGHOLFDSURFHHGLQJVKWPO
More informationCHAPTER NO. 3. Parameters
CHAPTER NO. 3 Modeling and Simulation of Battery Performance Parameters 3.1 Modeling and Simulation- Fundamentals 3.1.1 Importance 3.1.2 Modeling 3.1.3 Implementing a model 3.1.4 Simulation 3.2 Modeling
More informationSystem-level design of electrohydraulic and mechatronic systems
System-level design of electrohydraulic and mechatronic systems 2008 The MathWorks, Inc. Steve Miller Technical Marketing, Physical Modeling Tools The MathWorks GmbH, Munich, Germany Steve.Miller@mathworks.de
More informationInvestigation & Analysis of Three Phase Induction Motor Using Finite Element Method for Power Quality Improvement
International Journal of Electronic and Electrical Engineering. ISSN 0974-2174 Volume 7, Number 9 (2014), pp. 901-908 International Research Publication House http://www.irphouse.com Investigation & Analysis
More informationEPE97 OPTIMIZED DESIGN OF VARIABLE-SPEED DRIVES BASED ON NUMERICAL SIMULATION
EPE97 OPTIMIZED DESIGN OF VARIABLE-SPEED DRIVES BASED ON NUMERICAL SIMULATION J.-J.Simond*, A.Sapin**, B.Kawkabani*, D.Schafer***, M.Tu Xuan*, B.Willy*** *Swiss Federal Institute of Technology, Electrical
More informationJ.-J.Simond*, A.Sapin**, B.Kawkabani*, D.Schafer***, M.Tu Xuan*, B.Willy***
EPE97 OPTIMIZED DESIGN OF VARIABLE-SPEED DRIVES BASED ON NUMERICAL SIMULATION J.-J.Simond*, A.Sapin**, B.Kawkabani*, D.Schafer***, M.Tu Xuan*, B.Willy*** *Swiss Federal Institute of Technology, Electrical
More informationRemy HVH250 Application Manual Remy HVH250 Application Manual
Preliminary Draft HVH250 MotorManual20110407.doc Page 1 of 31 TABLE OF CONTENTS 1. INTRODUCTION...3 2. SYSTEM OVERVIEW...3 2.1 Installation Overview...3 2.2 Motor Overview...3 3. HVH MOTOR TYPICAL APPLICATIONS...4
More informationDesign Analysis of a Dual Rotor Permanent Magnet Machine driven Electric Vehicle
Design Analysis of a Dual Rotor Permanent Magnet Machine driven Electric Vehicle Mohd Izzat Bin Zainuddin 1, Aravind CV 1,* 1 School of Engineering, Taylor s University, Malaysia Abstract. Electric bike
More informationEMR 11 Lausanne July S. A. Syed 1,3, W. Lhomme 1,3, A. Bouscayrol 1,3, O. Pape 2,3, B. Petitdidier 2,3
EMR 11 Lausanne July 2011 Joint Summer School EMR 11 Energetic Macroscopic Representation S. A. Syed 1,3, W. Lhomme 1,3, A. Bouscayrol 1,3, O. Pape 2,3, B. Petitdidier 2,3 1 L2EP, University of Lille 1;
More informationSEMIS Simulation Tool for 6 pulse Controlled Rectifier
User manual 5SYA 2110-01 SEMIS Simulation Tool for 6 pulse Controlled Rectifier ABB Semiconductors introduces its web based semiconductor simulation tool SEMIS. Providing thermal calculation of the semiconductor
More informationModelling and Simulation Analysis of the Brushless DC Motor by using MATLAB
International Journal of Innovative Technology and Exploring Engineering (IJITEE) Modelling and Simulation Analysis of the Brushless DC Motor by using MATLAB G.Prasad, N.Sree Ramya, P.V.N.Prasad, G.Tulasi
More informationIntegration of complex Modelica-based physics models and discrete-time control systems: Approaches and observations of numerical performance
Integration of complex Modelica-based physics models and discrete-time control systems: Approaches and observations of numerical performance Kai Wang 1 Christopher Greiner 1 John Batteh 2 Lixiang Li 2
More informationModeling the Neuro-Fuzzy Control with the Dynamic Model of the Permanent Magnet DC Motor
SISY 2006 4 th Serbian-Hungarian Joint Symposium on Intelligent Systems Modeling the Neuro-Fuzzy Control with the Dynamic Model of the Permanent Magnet DC Motor Ottó Búcsú, Gábor Kávai, István Kecskés,
More informationAltair MotionView and ABAQUS for Direct Suspension Bushing Tuning
Altair MotionView and ABAQUS for Direct Suspension Bushing Tuning Jon Quigley, Mike White, Jeff Liu, Andy Rocha Altair Engineering, Inc. Automotive development engineers analytically tune suspension bushings
More informationABB uses an OPAL-RT real time simulator to validate controls of medium voltage power converters
ABB uses an OPAL-RT real time simulator to validate controls of medium voltage power converters ABB is a leader in power and automation technologies that enable utility and industry customers to improve
More information2 nd International Conference on Engineering Optimization
2 nd International Conference on Engineering Optimization September 6-9, 2010, Lisbon, Portugal Brushless Permanent Magnet Motor Losses Minimization with Constraints in Perspective of Life Cycle Assessment
More informationModeling and Simulate Automotive Powertrain Systems
Modeling and Simulate Automotive Powertrain Systems Maurizio Dalbard 2015 The MathWorks, Inc. 1 Model-Based Design Challenges It s hard to do good Model-Based Design without good models Insufficient expertise
More informationPermanent Magnet Machines for Distributed Generation: A Review
Permanent Magnet Machines for Distributed Generation: A Review Paper Number: 07GM0593 Authors: Tze-Fun Chan, EE Department, The Hong Kong Polytechnic University, Hong Kong, China Loi Lei Lai, School of
More informationPower Electronics & Drives [Simulink, Hardware-Open & Closed Loop]
Power Electronics & [Simulink, Hardware-Open & Closed Loop] Project code Project theme Application ISTPOW801 Estimation of Stator Resistance in Direct Torque Control Synchronous Motor ISTPOW802 Open-Loop
More informationDYNA4 Open Simulation Framework with Flexible Support for Your Work Processes and Modular Simulation Model Library
Open Simulation Framework with Flexible Support for Your Work Processes and Modular Simulation Model Library DYNA4 Concept DYNA4 is an open and modular simulation framework for efficient working with simulation
More informationUniversity of Jordan School of Engineering Mechatronics Engineering Department. Fluid Power Engineering Lab
University of Jordan School of Engineering Mechatronics Engineering Department 0908464 09 The University of Jordan School of Engineering MECHATRONICS ENGINEERING DEPARTMENT EXPERIMENT N0. 1 Introduction
More informationReal-time simulation of the 2014 Formula 1 car
Real-time simulation of the 2014 Formula 1 car Abstract In 2014 a new powertrain specification will be introduced in to Formula 1. This new specification will change the internal combustion engine to be
More informationTransient analysis of a new outer-rotor permanent-magnet brushless DC drive using circuit-field-torque coupled timestepping finite-element method
Title Transient analysis of a new outer-rotor permanent-magnet brushless DC drive using circuit-field-torque coupled timestepping finite-element method Author(s) Wang, Y; Chau, KT; Chan, CC; Jiang, JZ
More informationPERFORMANCE AND ENHANCEMENT OF Z-SOURCE INVERTER FED BLDC MOTOR USING SLIDING MODE OBSERVER
PERFORMANCE AND ENHANCEMENT OF Z-SOURCE INVERTER FED BLDC MOTOR USING SLIDING MODE OBSERVER K.Kalpanadevi 1, Mrs.S.Sivaranjani 2, 1 M.E. Power Systems Engineering, V.S.B.Engineering College, Karur, Tamilnadu,
More informationAn introduction to the VehicleInterfaces package
An introduction to the VehicleInterfaces package Mike Dempsey Claytex Services Limited Agenda Motivation How is VehicleInterfaces different? Influences Working with VehicleInterfaces Example 1 Simple 1D
More informationVolume II, Issue VII, July 2013 IJLTEMAS ISSN
Different Speed Control Techniques of DC Motor: A Comparative Analysis Virendra Singh Solanki, Virendra Jain, Anil Kumar Chaudhary Department of Electrical and Electronics Engineering,RGPV university,
More informationENERGY ANALYSIS OF A POWERTRAIN AND CHASSIS INTEGRATED SIMULATION ON A MILITARY DUTY CYCLE
U.S. ARMY TANK AUTOMOTIVE RESEARCH, DEVELOPMENT AND ENGINEERING CENTER ENERGY ANALYSIS OF A POWERTRAIN AND CHASSIS INTEGRATED SIMULATION ON A MILITARY DUTY CYCLE GT Suite User s Conference: 9 November
More informationModeling PM Rotary-Linear Motors with Twin- Stator Using 3D FEMM
Louisiana State University LSU Digital Commons LSU Master's Theses Graduate School 2010 Modeling PM Rotary-Linear Motors with Twin- Stator Using 3D FEMM Oleksandr Dobzhanskyi Louisiana State University
More informationPerformance Analysis of 3-Ø Self-Excited Induction Generator with Rectifier Load
Performance Analysis of 3-Ø Self-Excited Induction Generator with Rectifier Load,,, ABSTRACT- In this paper the steady-state analysis of self excited induction generator is presented and a method to calculate
More informationBond Graph Modeling and Simulation Analysis of the Electro-Hydraulic Actuator in Non-Load Condition
4th International Conference on Sensors, Mechatronics and Automation (ICSMA 2016) Bond Graph Modeling and Simulation Analysis of the Electro-Hydraulic Actuator in Non-Load Condition Liming Yu1, a, Hongfei
More informationMaster of Engineering
STUDIES OF FAULT CURRENT LIMITERS FOR POWER SYSTEMS PROTECTION A Project Report Submitted in partial fulfilment of the requirements for the Degree of Master of Engineering In INFORMATION AND TELECOMMUNICATION
More informationRESEARCH OF THE DYNAMIC PRESSURE VARIATION IN HYDRAULIC SYSTEM WITH TWO PARALLEL CONNECTED DIGITAL CONTROL VALVES
RESEARCH OF THE DYNAMIC PRESSURE VARIATION IN HYDRAULIC SYSTEM WITH TWO PARALLEL CONNECTED DIGITAL CONTROL VALVES ABSTRACT The researches of the hydraulic system which consist of two straight pipelines
More informationInternational Journal of Advance Research in Engineering, Science & Technology
Impact Factor (SJIF): 3.632 International Journal of Advance Research in Engineering, Science & Technology e-issn: 2393-9877, p-issn: 2394-2444 (Special Issue for ITECE 2016) Field Oriented Control And
More informationHighly dynamic control of a test bench for highspeed train pantographs
PAGE 26 CUSTOMERS Highly dynamic control of a test bench for highspeed train pantographs Keeping Contact at 300 km/h Electric rail vehicles must never lose contact with the power supply, not even at the
More informationArtificial-Intelligence-Based Electrical Machines and Drives
Artificial-Intelligence-Based Electrical Machines and Drives Application of Fuzzy, Neural, Fuzzy-Neural, and Genetic-Algorithm-Based Techniques Peter Vas Professor of Electrical Engineering University
More informationContents. Review of Electric Circuitd. Preface ;
Preface ; Chapter 1 Review of Electric Circuitd 1.1 Introduction, 1 1.2 Direct Circuit Current, 1 1.2.1 Voltage, 3 1.2.2 Power, 3 1.2.3 Ohm's Law, 5 1.2.4 KirchhofTs Laws, 5 1.2.4.1 Kirchhoff s Current
More informationAdams-EDEM Co-simulation for Predicting Military Vehicle Mobility on Soft Soil
Adams-EDEM Co-simulation for Predicting Military Vehicle Mobility on Soft Soil By Brian Edwards, Vehicle Dynamics Group, Pratt and Miller Engineering, USA 22 Engineering Reality Magazine Multibody Dynamics
More informationReal-time Simulation of Electric Motors
Real-time Simulation of Electric Motors SimuleD Developments in the electric drive-train have the highest priority, but all the same proven development methods are not consequently applied. For example
More informationSINAMICS SM150. 4/2 Overview. 4/2 Benefits. 4/2 Design. 4/6 Function. 4/8 Selection and ordering data. 4/8 Options
/2 Overview /2 Benefits /2 Design /6 Function /8 Selection and ordering data /8 Options Technical data /1 General technical data /15 Control properties /15 Ambient conditions /16 Installation conditions
More informationInvestigation into the Potential Fuel Savings from the use of Hydraulic Regenerative Systems in Heavy Vehicles.
Investigation into the Potential Fuel Savings from the use of Hydraulic Regenerative Systems in Heavy Vehicles. Paul L. Matheson Dr. Jacek Stecki Postgraduate Student Supervisor (Associate Professor) Department
More informationHIL for power electronics and power systems with National
Hardware-in-the-Loop (HIL) Specialty HIL for power electronics and power systems with National Instruments www.opal-rt.com introduction For over 20 years, OPAL-RT HIL Simulators have been used by engineers
More informationSTUDY ON MAXIMUM POWER EXTRACTION CONTROL FOR PMSG BASED WIND ENERGY CONVERSION SYSTEM
STUDY ON MAXIMUM POWER EXTRACTION CONTROL FOR PMSG BASED WIND ENERGY CONVERSION SYSTEM Ms. Dipali A. Umak 1, Ms. Trupti S. Thakare 2, Prof. R. K. Kirpane 3 1 Student (BE), Dept. of EE, DES s COET, Maharashtra,
More informationSESSION 2 Powertrain. Why real driving simulation facilitates the development of new propulsion systems
SESSION 2 Powertrain Why real driving facilitates the development of new propulsion systems CO 2 /Fuel Consumption, Pollutant Emissions, EV Range The real driving values are more and more in the public
More informationUniversity of New South Wales School of Electrical Engineering & Telecommunications ELEC ELECTRIC DRIVE SYSTEMS.
Aims of this course University of New South Wales School of Electrical Engineering & Telecommunications ELEC4613 - ELECTRIC DRIVE SYSTEMS Course Outline The aim of this course is to equip students with
More informationActuation and Power Electronics. Actuation and Power Electronics overview
Actuation and Power Electronics Contents Mechatronics Training Curriculum Details of Course Actuation and Power Electronics Mechatronics Training Curriculum Premium Workshop Mechatronics System Design
More informationLaboratory Experiments for Enhanced Learning of Electromechanical Devices
Proceedings of 2014 Zone 1 Conference of the American Society for Engineering Education (ASEE Zone 1) Laboratory Experiments for Enhanced Learning of Electromechanical Devices Tomislav Bujanovic and Prasanta
More informationINDEXING MODULE FOR ACCURATE PNEUMATIC ACTUATING
INDEXING MODULE FOR ACCURATE PNEUMATIC ACTUATING Mihai Avram, Constantin Bucsan, Victor Constantin, Costinel Florin Negrila "Politehnica" University of Bucharest 313 Spl. Independentei, Bucharest, Romania
More informationSIMPACK WIND. What is SIMPACK? Applications: Highlights: Accurate Fast Robust Versatile. Application
Accurate Fast Robust Versatile SIMPACK WIND Application What is SIMPACK? SIMPACK is a general-purpose multi-body simulation (MBS) software tool which is used to aid the development of any mechanical or
More informationVehicle functional design from PSA in-house software to AMESim standard library with increased modularity
Vehicle functional design from PSA in-house software to AMESim standard library with increased modularity Benoit PARMENTIER, Frederic MONNERIE (PSA) Marc ALIRAND, Julien LAGNIER (LMS) Vehicle Dynamics
More information