ME2EE - Electrical Machines II
|
|
|
- Marvin Booth
- 6 years ago
- Views:
Transcription
1 Coordinating unit: Teaching unit: Academic year: Degree: ECTS credits: EEBE - Barcelona East School of Engineering EE - Department of Electrical Engineering BACHELOR'S DEGREE IN ELECTRICAL ENGINEERING (Syllabus 2009). (Teaching unit Compulsory) BACHELOR'S DEGREE IN ELECTRICAL ENGINEERING (Syllabus 2009). (Teaching unit Compulsory) 6 Teaching languages: Catalan Teaching staff Coordinator: Others: Ramon Bargalló Perpiñà Ramon Bargalló Perpiñà, Altres. Prior skills Differential and Integral calculus Matrix calculus Numerical resolution of ODE Complex number algebra Electromagnetics DC and AC circuit analysis Transient circuit analysis (1st and 2n order) Scientific calculator use (HP 50G and CFX-9950) SOme knowledge of MATLAB/OCTAVE Requirements Electrical machines 1. Degree competences to which the subject contributes Specific: 1. Carry out calculations for the design of electrical machines. CEELE-20. Understand machine control and electric drives and their applications. Transversal: 2. EFFICIENT ORAL AND WRITTEN COMMUNICATION - Level 3. Communicating clearly and efficiently in oral and written presentations. Adapting to audiences and communication aims by using suitable strategies and means. Teaching methodology Expositive methodology for theory classes. PBL for exercices classes. Normalized test on laboratory classes. Learning objectives of the subject Electrical machines analysis feeds with industrial grid or ideal electronic converter. Non conventional machines analysis 1 / 5
2 Transient analysis of AC machines Introduction to design of electrical machines Study load Total learning time: 150h Hours large group: 45h 30.00% Hours medium group: 0h 0.00% Hours small group: 15h 10.00% Guided activities: 0h 0.00% Self study: 90h 60.00% 2 / 5
3 Content Synchronous machines: Generator operation Learning time: 31h Theory classes: 10h Self study : 19h Synchronous machine. Construction. Field excitation. Stator Winding. No load operation. Liakage. Influence of power factor on resultant field. Saturation. Equivalent circuit.synchronous reactance. Short circuit test. Power and torque. Limits. Salient pole machine. Torque and power equation. Test of generator. No load test. Short circuit test. Synchronous machine: motor operation Learning time: 26h Theory classes: 8h Self study : 16h Synchronous motor. Voltage operation. Limits. Starting. Salient pole motors. Power and torque expressions. Characteristics. Current operation. Characteristics. Synchronous reluctance motor. Self-commutated synchronous machine. Grid Syncronization of synchronous generator. Working as a motor. COnstant power characteristics. Non conventional machines Learning time: 36h Theory classes: 12h Laboratory classes: 3h Self study : 21h Electromechanical energy conversion principles.study of lineal and rotating systems. Multiple excitation systems. Torque. Switched reluctance machines. Step motors. Linear motors. Other. Step motor test. Asynchronous linear motor test 3 / 5
4 Direct current machines Learning time: 16h Self study : 9h Introduction. Constructional features. Armature voltage. Armature reaction. Commutation. MAgnetization curve. Generators. Motors. Excitation methods. Mechanical characteristics. Universal motors. DC generator test DC motor test. Trnasients and Dynamics of electrical machines Learning time: 17h Self study : 10h 3-2 transformations. Rotating references. FLux, voltage, power and torque expressions. Equivalent circuits for transient analysis. Case study. Starting of induction machine. Simulation. Experimental test. Design of electrical machines Learning time: 24h Laboratory classes: 4h Self study : 15h General expressions for torque. Standards. Scale laws. FE applications for analysis and design of electrical machines FE analysis of electrical machine Qualification system Final test: 20% Laboratory:20% Homework exercicis+classe exercises: 15% Middle term exam: 20+20% 4 / 5
5 Regulations for carrying out activities Scientific calculator 1 sheet with expressions. No reexam. Bibliography Basic: Zorbas, Dino. Electric machines : principles, applications and control schematics. 2nd ed. Montreal: McGill University, ISBN Boldea, I.; Tutelea, Lucian. Electric machines : steady state, transients and design with MATLAB. Boca Raton [etc.]: CRC Press / Taylor & Francis Group, cop ISBN Pyrhönen, Juha; Jokinen, Tapani; Hrabovcová, Valéria. Design of rotating electrical machines. Chichester: John Wiley & Sons, ISBN Fraile Mora, Jesús. Máquinas eléctricas. 7a ed. Madrid [etc.]: Garceta, ISBN Complementary: Gieras, Jacek F.; Wing, Mitchell. Permanent magnet motor technology: design and applications. 2nd ed. New York: Marcel Dekker, cop ISBN / 5
AEER - Electric Drives with High Efficiency and Low Environmental Impact
Coordinating unit: Teaching unit: Academic year: Degree: ECTS credits: 2017 240 - ETSEIB - Barcelona School of Industrial Engineering 709 - EE - Department of Electrical Engineering MASTER'S DEGREE IN
IRXPE - Renewable Integration in Electrical Grids
Coordinating unit: Teaching unit: Academic year: Degree: ECTS credits: 2016 295 - EEBE - Barcelona East School of Engineering 709 - EE - Department of Electrical Engineering BACHELOR'S DEGREE IN ELECTRICAL
SIE - Electrical Systems
Coordinating unit: Teaching unit: Academic year: Degree: ECTS credits: 2017 860 - EEI - Igualada School of Engineering 709 - EE - Department of Electrical Engineering BACHELOR'S DEGREE IN INDUSTRIAL SCHEDULING
ACSEP - Applications and Control of Power Electronic Systems
Coordinating unit: Teaching unit: Academic year: Degree: ECTS credits: 2018 205 - ESEIAAT - Terrassa School of Industrial, Aerospace and Audiovisual Engineering 710 - EEL - Department of Electronic Engineering
Electromechanical Systems aim Devices
Electromechanical Systems aim Devices Sergey E. Lyshevski C\ CRC Press NV* I Taylor & Francis Group Boca Raton London New York CRC Press is an imprint of the Taylor & Francis Group, an informa business
Internal Combustion Engines
Coordinating unit: Teaching unit: Academic year: Degree: ECTS credits: 2017 280 - FNB - Barcelona School of Nautical Studies 742 - CEN - Department of Nautical Sciences and Engineering MASTER'S DEGREE
Electric Machines CHARLES A. GROSS. Aubum University Auburn, Alabama, U.S.A. LßP) CRC Press Vv* / Taylor & Francis Croup. Boca Raton London New York
Electric Machines CHARLES A. GROSS Aubum University Auburn, Alabama, U.S.A. LßP) CRC Press Vv* / Taylor & Francis Croup Boca Raton London New York CRC Press is an imprint of the Taylor & Francis Group,
ELECTRIC MACHINES. Steady State, Transients, and Design with MATLAB ION BOLDEA LUCIAN TUTELEA
ELECTRIC MACHINES Steady State, Transients, and Design with MATLAB ION BOLDEA LUCIAN TUTELEA Lop) CRC Press ^ ^ J Taylor & Francis Group Boca Raton London New York CRC Press is an imprint of the Taylor
Thermal Engines
Coordinating unit: Teaching unit: Academic year: Degree: ECTS credits: 2018 280 - FNB - Barcelona School of Nautical Studies 742 - CEN - Department of Nautical Sciences and Engineering MASTER'S DEGREE
COLLEGE OF ENGINEERING DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING QUESTION BANK SUBJECT CODE & NAME : EE 1001 SPECIAL ELECTRICAL MACHINES
KINGS COLLEGE OF ENGINEERING DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING QUESTION BANK SUBJECT CODE & NAME : EE 1001 SPECIAL ELECTRICAL MACHINES YEAR / SEM : IV / VII UNIT I SYNCHRONOUS RELUCTANCE
EM - Electromobility and Electrical Aircraft Systems
Coordinating unit: Teaching unit: Academic year: Degree: ECTS credits: 2018 205 - ESEIAAT - Terrassa School of Industrial, Aerospace and Audiovisual Engineering 709 - EE - Department of Electrical Engineering
Contents. Review of Electric Circuitd. Preface ;
Preface ; Chapter 1 Review of Electric Circuitd 1.1 Introduction, 1 1.2 Direct Circuit Current, 1 1.2.1 Voltage, 3 1.2.2 Power, 3 1.2.3 Ohm's Law, 5 1.2.4 KirchhofTs Laws, 5 1.2.4.1 Kirchhoff s Current
Propulsion and Auxiliary Systems
Coordinating unit: Teaching unit: Academic year: Degree: ECTS credits: 2018 280 - FNB - Barcelona School of Nautical Studies 742 - CEN - Department of Nautical Sciences and Engineering MASTER'S DEGREE
Internal Combustion Engines
Coordinating unit: Teaching unit: Academic year: Degree: ECTS credits: 2017 280 - FNB - Barcelona School of Nautical Studies 742 - CEN - Department of Nautical Sciences and Engineering BACHELOR'S DEGREE
DEPARTMENT OF EI ELECTRICAL MACHINE ASSIGNMENT 1
It is the mark of an educated mind to be able to entertain a thought without accepting it. DEPARTMENT OF EI ELECTRICAL MACHINE ASSIGNMENT 1 1. Explain the Basic concepts of rotating machine. 2. With help
AXIAL FLUX PERMANENT MAGNET BRUSHLESS MACHINES
AXIAL FLUX PERMANENT MAGNET BRUSHLESS MACHINES Jacek F. Gieras, Rong-Jie Wang and Maarten J. Kamper Kluwer Academic Publishers, Boston-Dordrecht-London, 2004 TABLE OF CONTENETS page Preface v 1. Introduction
SQA Advanced Unit specification: general information
SQA Advanced Unit specification: general information Unit title: Electrical Machine Principles Unit code: HT83 47 Superclass: XJ Publication date: August 2017 Source: Scottish Qualifications Authority
University of New South Wales School of Electrical Engineering & Telecommunications ELEC ELECTRIC DRIVE SYSTEMS.
Aims of this course University of New South Wales School of Electrical Engineering & Telecommunications ELEC4613 - ELECTRIC DRIVE SYSTEMS Course Outline The aim of this course is to equip students with
Academic Course Description
BEE305- ELECTRICAL MACHINES Academic Course Description BHARATH UNIVERSITY Faculty of Engineering and Technology Department of Electrical and Electronics Engineering BEE305- ELECTRICAL MACHINES Third Semester,
QUESTION BANK SPECIAL ELECTRICAL MACHINES
SEVENTH SEMESTER EEE QUESTION BANK SPECIAL ELECTRICAL MACHINES TWO MARK QUESTIONS 1. What is a synchronous reluctance 2. What are the types of rotor in synchronous reluctance 3. Mention some applications
Effect of Permanent Magnet Rotor Design on PMSM Properties
Transactions on Electrical Engineering, Vol. 1 (2012), No. 3 98 Effect of Permanent Magnet Rotor Design on PMSM Properties SEKERÁK Peter, HRABOVCOVÁ Valéria, RAFAJDUS Pavol, KALAMEN Lukáš, ONUFER Matúš
Introduction. Introduction. Switched Reluctance Motors. Introduction
UNIVERSITY OF TECHNOLOGY, SYDNEY FACULTY OF ENGINEERING 48550 Electrical Energy Technology Switched Reluctance Motors Topics to cover: 1. Introduction 2. Structures & Torque Production 3. Drive Circuits
DHANALAKSHMI SRINIVASAN COLLEGE OF ENGINEERING AND TECHNOLOGY MAMALLAPURAM, CHENNAI
DHANALAKSHMI SRINIVASAN COLLEGE OF ENGINEERING AND TECHNOLOGY MAMALLAPURAM, CHENNAI -603104 DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING QUESTION BANK VII SEMESTER EE6501-Power system Analysis
Marine Pollution Prevention and Sustainability
Coordinating unit: Teaching unit: Academic year: Degree: ECTS credits: 2017 280 - FNB - Barcelona School of Nautical Studies 742 - CEN - Department of Nautical Sciences and Engineering BACHELOR'S DEGREE
Internal Combustion Engines
Coordinating unit: Teaching unit: Academic year: Degree: ECTS credits: 2018 280 - FNB - Barcelona School of Nautical Studies 742 - CEN - Department of Nautical Sciences and Engineering BACHELOR'S DEGREE
ELEC 585/462 MOTOR DRIVE DYNAMICS COURSE OUTLINE & ASSESSMENT TECHNIQUES SEPT- DEC / FALL 2013 CRN 11254/11246
ELEC 585/462 MOTOR DRIVE DYNAMICS COURSE OUTLINE & ASSESSMENT TECHNIQUES SEPT- DEC / FALL 2013 CRN 11254/11246 Instructor: Office Hours: Dr. S. Nandi Days: Any time by appointment Phone: 721-8679 Location:
Power Electronics and Drives (PED)
Power Electronics and Drives (PED) Introduction Spurred on by technological progress and a steadily increasing concern about the efficient use of depleting energy resources, static power electronic converters
B.E-EEE(Marine) Batch 7. Subject Code EE1704 Subject Name Special Electrical Machines
Course B.E-EEE(Marine) Batch 7 Semester VII Subject Code EE1704 Subject Name Special Electrical Machines Part-A Unit-1 1 List the applications of synchronous reluctance motors. 2 Draw the voltage and torque
ELECTRICAL POWER and POWER ELECTRONICS
Introduction to ELECTRICAL POWER and POWER ELECTRONICS MUKUND R PATEL (cj* CRC Press Taylor & Francis Group Boca Raton London New York CRC Press is an imprint of the Taylor & Francis Croup, an informa
Fachpraktikum Elektrische Maschinen. Theory of Induction Machines
Fachpraktikum Elektrische Maschinen Theory of Induction Machines Prepared by Arda Tüysüz January 2013 Fundamentals Induction machines (also known as asynchronous machines) are by far the most common type
UNIT-I ALTERNATORS PART-A
UNIT-I ALTERNATORS 1. What principle is used in Alternators? 2. What are the requirements of an alternator? 3. Mention the types of alternator rotor. 4. What is hunting in alternators? 5. What are the
Question Bank ( ODD)
Programme : B.E Question Bank (2016-2017ODD) Subject Semester / Branch : EE 6703 SPECIAL ELECTRICAL MACHINES : VII-EEE UNIT - 1 PART A 1. List the applications of synchronous reluctance motors. 2. Draw
SYLLABUS. osmania university UNIT - I UNIT - II UNIT - III UNIT - IV CHAPTER - 1 : PRINCIPLES OF ELECTRO-MECHANICAL ENERGY CONVERSION CHAPTER - 2 :
i UNIT - I SYLLABUS osmania university UNIT - II CHAPTER - 1 : PRINCIPLES OF ELECTRO-MECHANICAL ENERGY CONVERSION Energy in Magnetic System, Field Energy and Mechanical Force, Direction of Mechanical Force
CHAPTER THREE DC MOTOR OVERVIEW AND MATHEMATICAL MODEL
CHAPTER THREE DC MOTOR OVERVIEW AND MATHEMATICAL MODEL 3.1 Introduction Almost every mechanical movement that we see around us is accomplished by an electric motor. Electric machines are a means of converting
Axial Flux Permanent Magnet Brushless Machines
Jacek F. Gieras Rong-Jie Wang Maarten J. Kamper Axial Flux Permanent Magnet Brushless Machines Second Edition Springer Contents 1 Introduction 1 1.1 Scope 1 1.2 Features 1 1.3 Development of AFPM Machines
Using MATLAB/ Simulink in the designing of Undergraduate Electric Machinery Courses
Using MATLAB/ Simulink in the designing of Undergraduate Electric Machinery Courses Mostafa.A. M. Fellani, Daw.E. Abaid * Control Engineering department Faculty of Electronics Technology, Beni-Walid, Libya
SPEED AND TORQUE CONTROL OF AN INDUCTION MOTOR WITH ANN BASED DTC
SPEED AND TORQUE CONTROL OF AN INDUCTION MOTOR WITH ANN BASED DTC Fatih Korkmaz Department of Electric-Electronic Engineering, Çankırı Karatekin University, Uluyazı Kampüsü, Çankırı, Turkey ABSTRACT Due
Modeling and Simulation of A Bldc Motor By Using Matlab/Simulation Tool
Modeling and Simulation of A Bldc Motor By Using Matlab/Simulation Tool Miss Avanti B.Tayade (Department of Electrical Engineering,,S.D.College of Engineering & Technology.,Wardha) ABSTRACT: The objective
Introduction - Why Brushless? (Cont( Introduction. Brushless DC Motors. Introduction Electromechanical Systems
UNIVERSITY OF TECHNOLOGY, SYDNEY FACULTY OF ENGINEERING 48531 Electromechanical Systems Brushless DC Motors Topics to cover: 1. 2. Structures & Drive Circuits 3. Equivalent Circuit 4. Performance - Why
Laboratory Experiments for Enhanced Learning of Electromechanical Devices
Proceedings of 2014 Zone 1 Conference of the American Society for Engineering Education (ASEE Zone 1) Laboratory Experiments for Enhanced Learning of Electromechanical Devices Tomislav Bujanovic and Prasanta
VALLIAMMAI ENGINEERING COLLEGE
VALLIAMMAI ENGINEERING COLLEGE SRM Nagar, Kattankulathur 603 203. DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING Question Bank EE6401 ELECTRICAL MACHINES I UNIT I: MAGNETIC CIRCUITS AND MAGNETIC
Design Procedures and Analysis for Single-Phase Variable Reluctance Motors
International Conference on Renewable Energies and Power Quality (ICREPQ 16) Madrid (Spain), 4 th to 6 th May, 2016 Renewable Energy and Power Quality Journal (RE&PQJ) ISSN 2172-038 X, No.14 May 2016 Design
Scope for Electrical Machine Design. Objectives. Design and Engineering. Course Description. 23-Dec-16 DESIGN OF ELECTRICAL MACHINES AN OVERVIEW
SNS COLLEGE OF ENGINEERING (Accredited by NAAC-UGC with A Grade, Approved by AICTE, Recognized by UGC and Affiliated to Anna University, Chennai) COIMBATORE 641 107 DEPARTMENT OF ELECTRICAL AND ELECTRONICS
Dynamic Behaviour of Asynchronous Generator In Stand-Alone Mode Under Load Perturbation Using MATLAB/SIMULINK
International Journal Of Engineering Research And Development e-issn: 2278-067X, p-issn: 2278-800X, www.ijerd.com Volume 14, Issue 1 (January 2018), PP.59-63 Dynamic Behaviour of Asynchronous Generator
SYNCHRONOUS GENERATOR (ALTERNATOR)
i SYLLABUS osmania university UNIT - I SYNCHRONOUS MACHINES Constructional Details, Types of Windings, Winding Factors, EMF Equation, Fractional Pitch and Fractional Slot Windings, Suppression of Harmonics
Renewable Energy Grid Integration and Distributed Generation Specialization Syllabus
Renewable Energy Grid Integration and Distributed Generation Specialization Syllabus Contents: 1. DISTRIBUTED GENERATION 2. GENERATION AND STORING TECHNOLOGIES 3. CONTROL TECHNIQUES AND RENEWABLE ENERGY
EE6401 ELECTRICAL MACHINES I UNIT I: MAGNETIC CIRCUITS AND MAGNETIC MATERIALS PART: A 1. Define EMF and MMF. 2. Name the main magnetic quantities with their symbols having the following units: Webers,
Aspects of Permanent Magnet Machine Design
Aspects of Permanent Magnet Machine Design Christine Ross February 7, 2011 Grainger Center for Electric Machinery and Electromechanics Outline Permanent Magnet (PM) Machine Fundamentals Motivation and
Electric Machines I 2017 Shiraz University of Technology Dr. A. Rahideh
In The Name of God The Most Compassionate, The Most Merciful Electric Machines I Table of Contents 1. Introduction to Electric Machines 2. Electromagnetic Circuits 3. Principle of Electromechanical Energy
Electricity Course. Part B Course Outline
Electricity Course Rev. Date: 10/01/2002 By: R. Crompton Part B Course Outline Subject Area 0 Orientation 2.6 0.0 0.1 To the School 1.0 0.2 To the Course 1.0 0.3 To the 0.3 0.3 0.4 To Possible Emergencies
Electrical Theory. Generator Theory. PJM State & Member Training Dept. PJM /22/2018
Electrical Theory Generator Theory PJM State & Member Training Dept. PJM 2018 Objectives The student will be able to: Describe the process of electromagnetic induction Identify the major components of
Design of Brushless Permanent-Magnet Machines. J.R. Hendershot Jr. T.J.E. Miller
Design of Brushless Permanent-Magnet Machines J.R. Hendershot Jr. T.J.E. Miller Contents 1 GENERAL INTRODUCTION l 1.1 Definitions and types of brushless motor 1 1.2 Commutation,. 4 1.3 Operation of 3-phase
EE6401 ELECTRICAL MACHINES I UNIT I: MAGNETIC CIRCUITS AND MAGNETIC MATERIALS PART: A 1. Define EMF and MMF. 2. Name the main magnetic quantities
EE6401 ELECTRICAL MACHINES I UNIT I: MAGNETIC CIRCUITS AND MAGNETIC MATERIALS PART: A 1. Define EMF and MMF. 2. Name the main magnetic quantities with their symbols having the following units: Webers,
Synchronous Motor Drives
UNIT V SYNCHRONOUS MOTOR DRIVES 5.1 Introduction Synchronous motor is an AC motor which rotates at synchronous speed at all loads. Construction of the stator of synchronous motor is similar to the stator
CONTROL AND PERFORMANCE OF A DOUBLY-FED INDUCTION MACHINE FOR WIND TURBINE SYSTEMS
CONTROL AND PERFORMANCE OF A DOUBLY-FED INDUCTION MACHINE FOR WIND TURBINE SYSTEMS Lucian Mihet-Popa "POLITEHNICA" University of Timisoara Blvd. V. Parvan nr.2, RO-300223Timisoara mihetz@yahoo.com Abstract.
Three-Phase Induction 208V Motor with MATLAB
EXPERIMENT Induction motor with Matlab Three-Phase Induction Motors 208V LL OBJECTIVE This experiment demonstrates the performance of squirrel-cage induction motors and the method for deriving electrical
INTRODUCTION. I.1 - Historical review.
INTRODUCTION. I.1 - Historical review. The history of electrical motors goes back as far as 1820, when Hans Christian Oersted discovered the magnetic effect of an electric current. One year later, Michael
GENERATION, CONVERSION, OR DISTRIBUTION OF ELECTRIC POWER
XXXX H02 GENERATION, CONVERSION, OR DISTRIBUTION OF ELECTRIC POWER XXXX CONTROL OR REGULATION OF ELECTRIC MOTORS, GENERATORS, OR DYNAMO-ELECTRIC CONVERTERS; CONTROLLING TRANSFORMERS, REACTORS OR CHOKE
APPLICATION OF VARIABLE FREQUENCY TRANSFORMER (VFT) FOR INTEGRATION OF WIND ENERGY SYSTEM
APPLICATION OF VARIABLE FREQUENCY TRANSFORMER (VFT) FOR INTEGRATION OF WIND ENERGY SYSTEM A THESIS Submitted in partial fulfilment of the requirements for the award of the degree of DOCTOR OF PHILOSOPHY
Synchronous Generators I. EE 340 Spring 2011
Synchronous Generators I EE 340 Spring 2011 Construction of synchronous machines In a synchronous generator, a DC current is applied to the rotor winding producing a rotor magnetic field. The rotor is
CHAPTER 3 BRUSHLESS DC MOTOR
53 CHAPTER 3 BRUSHLESS DC MOTOR 3.1 INTRODUCTION The application of motors has spread to all kinds of fields. In order to adopt different applications, various types of motors such as DC motors, induction
SSC-JE STAFF SELECTION COMMISSION ELECTRICAL ENGINEERING STUDY MATERIAL ELECTRICAL MACHINES
1 SSC-JE STAFF SELECTION COMMISSION ELECTRICAL ENGINEERING STUDY MATERIAL 28-B/7, Jia Sarai, Near IIT, Hauz Khas, New Delhi-110016. Ph. 011-26514888. www.engineersinstitute.com 2 CONTENT 1. : DC MACHINE,
Electrical Machines and Energy Systems: Overview SYED A RIZVI
Electrical Machines and Energy Systems: Overview SYED A RIZVI Electrical Machines and Energy Systems Deal with the generation, transmission & distribution, and utilization of electric power. This course
A Dual Stator Winding-Mixed Pole Brushless Synchronous Generator (Design, Performance Analysis & Modeling)
A Dual Stator Winding-Mixed Pole Brushless Synchronous Generator (Design, Performance Analysis & Modeling) M EL_SHANAWANY, SMR TAHOUN& M EZZAT Department (Electrical Engineering Department) University
Design of Fault Tolerant Control Technique for SRM Drive
Design of Fault Tolerant Control Technique for SRM Drive Peter Dubravka, Pavol Rafajdus, Pavol Makys, Adrian Peniak, Valeria Hrabovcova UNIVERSITY OF ZILINA Univerzitna 1 Zilina, Slovakia Tel.: +41 / 513
Subject Syllabus Summary Mechanical Engineering Undergraduate studies (BA) AERODYNAMIC OF AIRCRAFT Subject type:
Subject Syllabus Summary Mechanical Engineering Undergraduate studies (BA) Subject: AERODYNAMIC OF AIRCRAFT Subject type: Essential Subject code: Year: Semester: Form of studies: Full-time course Type
High starting performance synchronous motor
High starting performance synchronous motor Mona F. Moussa Mona.moussa@aast.edu Yasser G. Dessouky Ygd@aast.edu Department of Electrical and Control Engineering Arab Academy for Science and Technology
DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING
DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING QUESTION BANK 16EET41 SYNCHRONOUS AND INDUCTION MACHINES UNIT I SYNCHRONOUS GENERATOR 1. Why the stator core is laminated? 2. Define voltage regulation
CHAPTER 6 INTRODUCTION TO MOTORS AND GENERATORS
CHAPTER 6 INTRODUCTION TO MOTORS AND GENERATORS Objective Describe the necessary conditions for motor and generator operation. Calculate the force on a conductor carrying current in the presence of the
Higher National Unit Specification. General information for centres. Electrical Motors and Motor Starting. Unit code: DV9M 34
Higher National Unit Specification General information for centres Unit title: Electrical Motors and Motor Starting Unit code: DV9M 34 Unit purpose: This Unit has been developed to provide candidates with
GUJARAT TECHNOLOGICAL UNIVERSITY, AHMEDABAD, GUJARAT. Course Curriculum. D C MACHINES AND TRANSFORMERS (Code: ) Electrical Engineering
GUJARAT TECHNOLOGICAL UNIVERSITY, AHMEDABAD, GUJARAT Course Curriculum D C MACHINES AND TRANSFORMERS (Code: 3330902) Diploma Programme in which this course is offered Semester in which offered Electrical
Synchronous Generators I. Spring 2013
Synchronous Generators I Spring 2013 Construction of synchronous machines In a synchronous generator, a DC current is applied to the rotor winding producing a rotor magnetic field. The rotor is then turned
Vehicles de Propulsió Alternativa
Unitat responsable: Unitat que imparteix: Curs: Titulació: Crèdits ECTS: 2018 205 - ESEIAAT - Escola Superior d'enginyeries Industrial, Aeroespacial i Audiovisual de Terrassa 709 - EE - Departament d'enginyeria
Brake Test On Three Phase Induction Motor Lab Manual
Brake Test On Three Phase Induction Motor Lab Manual Electrical engineering machine lab manual. Brake test on three phase squirrel cage induction motor. No-load &, blocked rotor tests on three phase Slip.
KINGS COLLEGE OF ENGINEERING DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING QUESTION BANK
KINGS COLLEGE OF ENGINEERING DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING QUESTION BANK NAME OF THE SUBJECT: EE 1001 SPECIAL ELECTRICAL MACHINES YEAR / SEM : IV / VII UNIT- I AC COMMUTATOR MOTORS
Power and machines Program
Bachelor Degree Power and machines Program Dept. of Electrical Engineering Course specification Electrical Testing (A-B) اختبارات كهربية )أ- ب( EP324 1. Course Aim Main Aim To apply the theory of electrical
AC : USING MATLAB TO TEACH ELECTRIC ENERGY COURSES
AC 2012-3239: USING MATLAB TO TEACH ELECTRIC ENERGY COURSES Dr. Max Rabiee P.E., University of Cincinnati Max Rabiee earned his Ph.D. in electrical engineering from the University of Kentucky (U.K.) in
A Comparative Analysis of Speed Control Techniques of Dc Motor Based on Thyristors
International Journal of Engineering and Technology Volume 6 No.7, July, 2016 A Comparative Analysis of Speed Control Techniques of Dc Motor Based on Thyristors Nwosu A.W 1 and Nwanoro, G. C 2 1 National
R13 SET - 1. b) Describe different braking methods employed for electrical motors. [8M]
![R13 SET - 1. b) Describe different braking methods employed for electrical motors. [8M]](/thumbs/89/100786446.jpg "R13 SET - 1. b) Describe different braking methods employed for electrical motors. [8M]")
Code No:RT32026 R13 SET - 1 III B. Tech II Semester Regular Examinations, April - 2016 POWER SEMICONDUCTOR DRIVES (Electrical and Electronics Engineering) Time: 3 hours Maximum Marks: 70 Note: 1. Question
Comprehensive Technical Training
Comprehensive Technical Training For Sugar Mills Staff on Operation & Maintenance of Baggase Based HP Cogeneration System Schedule: 10 th July to 13 th July, 2017 A.C. GENERATOR Topics Covered. Introduction.
Chapter 4 DC Machines
Principles of Electric Machines and Power Electronics Chapter 4 DC Machines Third Edition P. C. Sen Chapter 4 DC machine Electric machine Type: rotating machine Applications: generator (electric source)
A STUDY OF A MULTI-STEP POLE TYPE ELECTRO-MAGNETIC ACTUATOR FOR CONTROLLING PROPORTIONAL HYDRAULIC VALVE
P1-6 Proceedings of the 7th JFPS International Symposium on Fluid Power, TOYAMA 28 September 15-18, 28 A STUDY OF A MULTI-STEP POLE TYPE ELECTRO-MAGNETIC ACTUATOR FOR CONTROLLING PROPORTIONAL HYDRAULIC
CHAPTER 6 DESIGN AND DEVELOPMENT OF DOUBLE WINDING INDUCTION GENERATOR
100 CHAPTER 6 DESIGN AND DEVELOPMENT OF DOUBLE WINDING INDUCTION GENERATOR 6.1 INTRODUCTION Conventional energy resources are not sufficient to meet the increasing electrical power demand. The usages of
YMCA UNIVERSITY OF SCIENCE AND TECHNOLOGY, FARIDABAD SCHEME OF STUDIES & EXAMINATIONS B.TECH 3 rd YEAR (SEMESTER V) ELECTRICAL ENGINEERING ( )
YMCA UNIVERSITY OF SCIENCE AND TECHNOLOGY, FARIDABAD SCHEME OF STUDIES & EXAMINATIONS B.TECH 3 rd YEAR (SEMESTER V) ELECTRICAL ENGINEERING (2017-18) Sl.No. Course code. Course Title L T P Credits CAT code
ST.ANNE S COLLEGE OF ENGINEERING AND TECHNOLOGY ANGUCHETTYPALAYAM, PANRUTI
ST.ANNE S COLLEGE OF ENGINEERING AND TECHNOLOGY ANGUCHETTYPALAYAM, PANRUTI 607106. QUESTION BANK DECEMBER 2017 - JUNE 2018 / EVEN SEMESTER BRANCH: EEE YR/SEM: II/IV BATCH: 2016-2020 SUB CODE/NAME: EE6401
2-marks question bank UNIT I - TRANSFORMERS UNIT II: AC MACHINES
2-marks question bank UNIT I - TRANSFORMERS 1. What is all day efficiency? 2. What are the applications of auto transformers? 3. Why transformer rating is expressed in KVA? 4. Does transformer draw any
Train, Transport and Technology. From Steam to High Speed
Coordinating unit: Teaching unit: Academic year: Degree: ECTS credits: 2017 240 - ETSEIB - Barcelona School of Industrial Engineering 749 - MAT - Department of Mathematics BACHELOR'S DEGREE IN INDUSTRIAL
INSTITUTE OF AERONAUTICAL ENGINEERING Dundigal, Hyderabad
INSTITUTE OF AERONAUTICAL ENGINEERING Dundigal, Hyderabad - 500 043 MECHANICAL ENGINEERING ASSIGNMENT Name : Electrical and Electronics Engineering Code : A40203 Class : II B. Tech I Semester Branch :
Simulation of Indirect Field Oriented Control of Induction Machine in Hybrid Electrical Vehicle with MATLAB Simulink
Simulation of Indirect Field Oriented Control of Induction Machine in Hybrid Electrical Vehicle with MATLAB Simulink Kohan Sal Lotf Abad S., Hew W. P. Department of Electrical Engineering, Faculty of Engineering,
Load Test On 3 Phase Slip Ring Induction Motor Lab Manual
Load Test On 3 Phase Slip Ring Induction Motor Lab Manual Electrical engineering machine lab manual. Brake test on three phase squirrel cage induction motor. No-load &, blocked rotor tests on three phase
A starting method of ship electric propulsion permanent magnet synchronous motor
Available online at www.sciencedirect.com Procedia Engineering 15 (2011) 655 659 Advanced in Control Engineeringand Information Science A starting method of ship electric propulsion permanent magnet synchronous
Workshop on Grid Integration of Variable Renewable Energy: Part 1
Workshop on Grid Integration of Variable Renewable Energy: Part 1 System Impact Studies March 13, 2018 Agenda Introduction Methodology Introduction to Generators 2 Introduction All new generators have
Artificial-Intelligence-Based Electrical Machines and Drives
Artificial-Intelligence-Based Electrical Machines and Drives Application of Fuzzy, Neural, Fuzzy-Neural, and Genetic-Algorithm-Based Techniques Peter Vas Professor of Electrical Engineering University
GUJARAT TECHNOLOGICAL UNIVERSITY, AHMEDABAD, GUJARAT COURSE CURRICULUM. Course Title: D C MACHINES AND TRANSFORMER (Code: )
GUJARAT TECHNOLOGICAL UNIVERSITY, AHMEDABAD, GUJARAT COURSE CURRICULUM Course Title: D C MACHINES AND TRANSFORMER (Code: 3330902) Diploma Programme in which this course is offered Electrical Engineering
CHAPTER 2 MODELLING OF SWITCHED RELUCTANCE MOTORS
9 CHAPTER 2 MODELLING OF SWITCHED RELUCTANCE MOTORS 2.1 INTRODUCTION The Switched Reluctance Motor (SRM) has a simple design with a rotor without windings and a stator with windings located at the poles.
NOVEL METHOD OF EVALUATING THE STEADY- STATE PERFORMANCE CHARACTERISTICS OF THREE PHASES SELF EXCITED INDUCTION GENERATOR
NOVEL METHOD OF EVALUATING THE STEADY- STATE PERFORMANCE CHARACTERISTICS OF THREE PHASES SELF EXCITED INDUCTION GENERATOR Salila M. Jena 1, Yogesh Chaudahri 2, A.S Kale 3 1, 2 Assistant Professor, Electrical
Analysis of an Electric Vehicle with a BLDC PM Motor in the Wheel Body
Analysis of an Electric Vehicle with a BLDC PM Motor in the Wheel Body K. Buhr * & P. Voženílek Czech Technical University in Prague, Faculty of Electrical Engineering, Czech Republic * Corresponding author:
SIDDHARTH GROUP OF INSTITUTIONS :: PUTTUR
SIDDHARTH GROUP OF INSTITUTIONS :: PUTTUR Siddharth Nagar, Narayanavanam Road 517583 QUESTION BANK (DESCRIPTIVE) Subject with Code : ET(16EE212) Year & Sem: II-B.Tech & II-Sem UNIT I DC GENERATORS Course
Course Syllabus and Information
Energy Storage Systems for Electric-based Transportations Course Syllabus and Information College of Engineering Department of Electrical and Computer Engineering Course No. ECE-5995 Selected topics Winter
Mechatronics Chapter 10 Actuators 10-3
MEMS1049 Mechatronics Chapter 10 Actuators 10-3 Electric Motor DC Motor DC Motor DC Motor DC Motor DC Motor Motor terminology Motor field current interaction Motor commutator It consists of a ring of