Load Test On 3 Phase Slip Ring Induction Motor Lab Manual
|
|
- Charla Goodwin
- 5 years ago
- Views:
Transcription
1 Load Test On 3 Phase Slip Ring Induction Motor Lab Manual Electrical engineering machine lab manual. Brake test on three phase squirrel cage induction motor. No-load &, blocked rotor tests on three phase Slip ring Induction motor. Regulation of a three phase alternator by synchronous. BRAKE TEST ON THREE PHASE SLIP RING TYPE INDUCTION. MOTOR. AIM: To conduct brake test on the given 3 phase induction motor and to plot its BRAKE TEST ON 3 PHASE SLIP RING INDUCTION MOTOR INSTRUCTION MANUAL BRAKE Load the induction motor in steps using the brake-drum arrangement. Electrical Machine-II. Laboratory Manual 6. Experiment 1. O.C. Test, S.C. Test & Load Test on a single phase transformer. To perform the brake test on a 3-ф slip ring induction motor and obtain its performance characteristics. Nameplate. A blocked rotor test is conducted on an induction motor. 3 See also, 4 References. Method(edit). In the blocked rotor test, the rotor is locked. A low voltage is applied on the stator terminals so that there is full load current When the rotor is stationary, the slip, s = 1 is the leakage reactance per phase as referred to stator Load test on 3-phase induction generator No-load & blocked rotor tests on three phase Slip ring Induction motor Speed control of 3-phase induction. 7, 12EEL57, Synchronous & Induction Machines Lab, EE, 0, 0, 3, 50, 50, 100 classification and types single phase, three-phase, squirrel-cage, slip-ring, Load test on a DC motordetermination of speed- torque and BHP- efficiency. Load Test On 3 Phase Slip Ring Induction Motor Lab Manual >>>CLICK HERE<<< To conduct a load test on capacitor start single phase induction motor it is a simple lab experiment to find and plot the characteristic curves of the ON 3 PHASE SLIP RING INDUCTION MOTOR INSTRUCTION MANUAL BRAKE TEST ON BH103L Engineering Physics I Laboratory power factor, starting torque equation, starting torque of squirrel cage & slip ring load torque, maximum torque & starting torque with numericals, torque-slip curves for Testing of three-phase induction motor: heat run test, HV test, OC test, SC test,.
2 Brake test on three phase squirrel cage induction motor. 4. No-load & blocked rotor tests on three phase Slip ring Induction motor. 5. Regulation of a three phase. 3. Bid not submitted on the state's standard forms. Bids must be received at the final assembly, processing, packaging, testing, and any other process that adds value Manual Reversing Starters 1 Three-Phase Wound-Rotor Induction Motor components, such as centrifugal switches, capacitors, brushes, slip rings. Electromechanics Laboratory Manual, Department of Electrical Engineering, IIT Delhi Steady-state performance of a 3-phase Induction motor: (a) Obtain Conduct load test and draw various performance characteristics (i) speed Speed control of slip sing induction motor: Speed Control of slip ring induction motor. Equivalent circuit, Phasor diagram, Circle diagram, Efficiency and slip 1) Literature available in any laboratory manual of Pharmaceutical Industries. (2) To perform direct load test on a three phase induction motor to find out its performance (2) Slip ring induction motor connected to self excited DC generator (with. Rotation of the brush arm by manual rotation delivers an output voltage To perform load test on a three phase induction motor and draw. 3. Torque -speed. 3. The tender will be opened on scheduled date and time as mentioned above and the desirous -Study of Load Test and correspondingly determine Electrical Lab Trainer Kit with built-in meters for Three Phase Slip Ring Induction Motor. Trainer kit to Operation and Maintenance manual to be provided. 12. Boring. The three-phase induction motor is the motor used most frequently for by
3 short-circuit rings at the front sides. Short-circuit rings are often combined with ventilating fans cause it has good starting properties on futl load. The slip s is defined as the difference between the speed operation-mode switch to MANUAL. 3EE6.2. 3EE6.3. 3EE EE7. Power Electronics Lab-I control of squirrel cage & slip ring motor, cascade connection, braking. 8 To perform the load test on a 3-phase induction motor and determine its performance P B Zbar: Industrial Electronics- A Text-Lab Manual, Tata McGraw Hill. The testing various speed control methods for DC machines V manual 3, Electrical Machines-II Lab, 3-phase induction motor AC Slipring Induction Motor 1-phase half & full controlled bridge inverter with R-RL load module. Fundamentals of Electrical Engg. Lab Manual:2nd semester(et&t) THEORY : A 3-phase induction motor consists of two main parts namely stator and rotor. this type of rotor are known as phase wound or slipring induction motors. This test is carried out to determine the no load loss or iron loss and no load current Io. 3 Course - Electric Machines 3: Synchronous and slip-ring machines control of virtual instruments and experiment hardware is provided by Load diagram of the generator 18 Servo machine test stand for 0.3kW machines incl. software EEM Single-phase induction motor with bifilar starting winding 300W Instructions to the Tenderers Form of Tender Commercial and General Terms & Commissioning of Induction motor testing lab facility as per specifications at Annexure A, and operation cum maintenance manual with spare parts list. 13. ring motors) -Full load test to determine efficiency, power & slip. Lab KEE-352. Electrical Measurement. Lab N Counters, ripple counters, synchronous counters, ring/johnson counters. To perform load test on a 3-phase induction motor and determine (a) speed- applications of induction motors, Comparisons between wound and slip ring type.
4 1 To perform no load and blocked rotor test on a three phase induction motor to to self excited DC generator (with appropriate starter), Slip ring induction motor Literature available in any laboratory manual of Pharmaceutical Industries. Test bench for fuel system 8 cylinder a/c frequency/ electronic drive HP main oil seal service procedures, Equipped with a manual transmission flywheel Power 2400W, Disc Wheel Diameter 180/230MM, No-load Speed 6000r/min, Motor-squirrel slip ring(would rotor) 30/415V induction motor 3 phase, 60 Hz. Electronics Engg (25). Microprocessor. Peripherals Lab Induction Machines-I: Introduction, construction (Cage and slip-ring induction motors), circuit parameters of 3-phase induction motor by No-Load &Block Rotor test Laboratory Manual for Operational Amplifiers and Linear ICs, David Bell, PHI. Slip Ring Induction Motor Lab Trainer for Electrical Engineering Teaching Labs Three Phase Transformer Lab Trainer - Graphical LCD display for high AC / DC Load - Exclusive and rugged designed panel, Stand alone design, On board digital Ammeter, Provided with an extensive manual. Testing Lab Equipments. GE 2115 COMPUTER PRACTICE LABORATORY I 3 Nos. 14. Three phase slip ring Induction Motor. 1 No. 15. Single phase Induction Resistive load starter,dol starter, manual star / delta Free convection Heat transfer test set up. LOAD TEST ON 3 O SQUIRREL CAGE INDUCTION MOTOR AIM: To conduct it is a simple lab experiment to find and plot the characteristic curves of the ON 3 PHASE SLIP RING INDUCTION MOTOR INSTRUCTION MANUAL BRAKE. LAB MANUAL. EE6461 As the test is a no-load test the required fuse ratings are 20% 3. The motor is started using the 3-point starter by slowly and carefully moving To conduct a direct load test on the given single phase transformer to determine the Slip ring induction motor is also called as wound rotor motor. electromechanical, electrical machines, single-phase, tree-phase, D.C., A.C., Winding Machines, laboratory concerning electricity, electronics, electrical machines, cage, slip ring, capacitor starter,
5 capacitor run motor, dahlander, double winding, Test & Misura, Multimetri analogici e digitali, voltmetri, amperometri. >>>CLICK HERE<<< For example, to study the dynamic characteristics of an induction squirrel cage motor, the data acquisition system allows to monitor, in real time, the Power Terminal Connections: 1 x Threephase terminals: 380 Vac + N+ GND and 1 x Single- exercises scheduled by the teacher, allows student to do test and view.
Brake Test On Three Phase Induction Motor Lab Manual
Brake Test On Three Phase Induction Motor Lab Manual Electrical engineering machine lab manual. Brake test on three phase squirrel cage induction motor. No-load &, blocked rotor tests on three phase Slip.
More informationRegulation: R16 Course & Branch: B.Tech EEE
SIDDHARTH GROUP OF INSTITUTIONS :: PUTTUR Siddharth Nagar, Narayanavanam Road 517583 QUESTION BANK (Descriptive) Subject with Code : Electrical Machines-II (16EE215) Regulation: R16 Course & Branch: B.Tech
More informationESO 210 Introduction to Electrical Engineering
ESO 210 Introduction to Electrical Engineering Lectures-37 Polyphase (3-phase) Induction Motor 2 Determination of Induction Machine Parameters Three tests are needed to determine the parameters in an induction
More informationGROUP OF INSTITUTIONS :: PUTTUR UNIT I SINGLE PHASE TRANSFORMERS
SIDDHARTH GROUP OF INSTITUTIONS :: PUTTUR Siddharth Nagar, Narayanavanam Road 517583 QUESTION BANK (Descriptive) Subject with Code : Electrical Machines-II (16EE215) Course & Branch: B.Tech EEE Regulation:
More information2014 ELECTRICAL TECHNOLOGY
SET - 1 II B. Tech I Semester Regular Examinations, March 2014 ELECTRICAL TECHNOLOGY (Com. to ECE, EIE, BME) Time: 3 hours Max. Marks: 75 Answer any FIVE Questions All Questions carry Equal Marks ~~~~~~~~~~~~~~~~~~~~~~~~~~
More informationUNIT-I ALTERNATORS PART-A
UNIT-I ALTERNATORS 1. What principle is used in Alternators? 2. What are the requirements of an alternator? 3. Mention the types of alternator rotor. 4. What is hunting in alternators? 5. What are the
More informationR07 SET - 1
R07 SET - 1 II B. Tech II Semester Supplementary Examinations April/May 2013 ELECTRICAL MACHINES - II (Electrical and Electronics Engineering) Time: 3 hours Max. Marks: 80 Answer any FIVE Questions All
More informationScheme - I. Sample Question Paper
Program Name Program Code Course Title Sample Question Paper : Diploma in Industrial Electronics : IE : Electrical Machines and Transformers Max. Marks : 70 Time : 3 Hrs. Q1. ATTEMPT ANY FIVE OF THE FOLLOWING.
More informationContents. Review of Electric Circuitd. Preface ;
Preface ; Chapter 1 Review of Electric Circuitd 1.1 Introduction, 1 1.2 Direct Circuit Current, 1 1.2.1 Voltage, 3 1.2.2 Power, 3 1.2.3 Ohm's Law, 5 1.2.4 KirchhofTs Laws, 5 1.2.4.1 Kirchhoff s Current
More informationDEPARTMENT OF EI ELECTRICAL MACHINE ASSIGNMENT 1
It is the mark of an educated mind to be able to entertain a thought without accepting it. DEPARTMENT OF EI ELECTRICAL MACHINE ASSIGNMENT 1 1. Explain the Basic concepts of rotating machine. 2. With help
More information2-marks question bank UNIT I - TRANSFORMERS UNIT II: AC MACHINES
2-marks question bank UNIT I - TRANSFORMERS 1. What is all day efficiency? 2. What are the applications of auto transformers? 3. Why transformer rating is expressed in KVA? 4. Does transformer draw any
More informationEXPERIMENT 2 THREE PHASE INDUCTION MOTOR, PART 1
University f Jordan School of Engineering Department of Mechatronics Engineering Electrical Machines Lab Eng. Osama Fuad Eng. Nazmi Ashour EXPERIMENT 2 THREE PHASE INDUCTION MOTOR, PART 1 OBJECTIVES To
More informationCircuit Diagram For Speed Control Of Slip Ring Induction Motor
Circuit Diagram For Speed Control Of Slip Ring Induction Motor A wound-rotor motor is a type of induction motor where the rotor windings are Compared to a squirrel-cage rotor, the rotor of the slip ring
More informationPretest Module 21 Units 1-3 AC Generators & Three-Phase Motors
Pretest Module 21 Units 1-3 AC Generators & Three-Phase Motors 1. What are the two main parts of a three-phase 2. Which part of a three-phase squirrel-cage induction motor is a hollow core? 3. What are
More informationDEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING
DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING QUESTION BANK 16EET41 SYNCHRONOUS AND INDUCTION MACHINES UNIT I SYNCHRONOUS GENERATOR 1. Why the stator core is laminated? 2. Define voltage regulation
More informationR13 SET - 1. b) Describe different braking methods employed for electrical motors. [8M]
Code No:RT32026 R13 SET - 1 III B. Tech II Semester Regular Examinations, April - 2016 POWER SEMICONDUCTOR DRIVES (Electrical and Electronics Engineering) Time: 3 hours Maximum Marks: 70 Note: 1. Question
More informationCHAPTER 6 DESIGN AND DEVELOPMENT OF DOUBLE WINDING INDUCTION GENERATOR
100 CHAPTER 6 DESIGN AND DEVELOPMENT OF DOUBLE WINDING INDUCTION GENERATOR 6.1 INTRODUCTION Conventional energy resources are not sufficient to meet the increasing electrical power demand. The usages of
More informationDev Bhoomi Institute Of Technology LABORATORY Department of Electrical And Electronics Engg. Electro-mechanical Energy Conversion II
REV. NO. : REV. DATE : PAGE: 1 Electro-mechanical Energy Conversion II 1. To perform no load and blocked rotor tests on a three phase squirrel cage induction motor and determine equivalent circuit. 2.
More informationDHANALAKSHMI COLLEGE OF ENGINEERING MANIMANGALAM. TAMBARAM, CHENNAI B.E. ELECTRICAL AND ELECTRONICS ENGINEERING
DHANALAKSHMI COLLEGE OF ENGINEERING MANIMANGALAM. TAMBARAM, CHENNAI B.E. ELECTRICAL AND ELECTRONICS ENGINEERING V SEMESTER EE2305 ELECTRICAL MACHINES II LABORATORY LABORATORY MANUAL 1 CONTENT S. No. Name
More informationThe Wound-Rotor Induction Motor Part I
Experiment 1 The Wound-Rotor Induction Motor Part I OBJECTIVE To examine the construction of the three-phase wound-rotor induction motor. To understand exciting current, synchronous speed and slip in a
More informationIowa State University Electrical and Computer Engineering. E E 452. Electric Machines and Power Electronic Drives
Electrical and Computer Engineering E E 452. Electric Machines and Power Electronic Drives Laboratory #12 Induction Machine Parameter Identification Summary The squirrel-cage induction machine equivalent
More informationFachpraktikum Elektrische Maschinen. Experiments with a 400/ 690 V Squirrel Cage Induction Machine
Fachpraktikum Elektrische Maschinen Experiments with a 400/ 690 V Squirrel Cage Induction Machine Prepared by Arda Tüysüz January 2013 1. Questions to answer before the experiment - Describe the operation
More informationELECTRICAL MACHINES. Theory and Practice. M.N. Bandyopadhyay
ELECTRICAL MACHINES Theory and Practice M.N. Bandyopadhyay ELECTRICAL MACHINES Theory and Practice M.N. Bandyopadhyay Director National Institute of Technology Kurukshetra Delhi-110092 2014 ELECTRICAL
More informationES09 ELECTRICAL MACHINES TECHNICAL SPECIFICATIONS
ES09 ELECTRICAL MACHINES TECHNICAL SPECIFICATIONS The Electrical Machines Trainer is produced in consistency with the training programs of the electrical and electronics engineering and teaching departments
More informationMEBS Utilities services Department of Electrical & Electronic Engineering University of Hong Kong
Brief comparison of induction motors with other types of motors Electric motors exhibit wide variations of speed-torque characteristics. [Adopted from EL-SHARKAWI, Mohamed A., Fundamentals of Electric
More informationSHRI ANGALAMMAN COLLEGE OF ENGINEERING AND TECHNOLOGY (An ISO 9001:2008 Certified Institution) SIRUGANOOR, TIRUCHIRAPPALLI
SHRI ANGALAMMAN COLLEGE OF ENGINEERING AND TECHNOLOGY (An ISO 9001:2008 Certified Institution) SIRUGANOOR, TIRUCHIRAPPALLI 621 105 DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING EE1205 - ELECTRICAL
More informationSingle Phase Induction Motor. Dr. Sanjay Jain Department Of EE/EX
Single Phase Induction Motor Dr. Sanjay Jain Department Of EE/EX Application :- The single-phase induction machine is the most frequently used motor for refrigerators, washing machines, clocks, drills,
More informationAC MOTOR TYPES. DESCRIBE how torque is produced in a single-phase AC motor. EXPLAIN why an AC synchronous motor does not have starting torque.
Various types of AC motors are used for specific applications. By matching the type of motor to the appropriate application, increased equipment performance can be obtained. EO 1.5 EO 1.6 EO 1.7 EO 1.8
More informationPAC TRAINING PUMP MOTORS
PAC TRAINING PUMP MOTORS 1 Basics Magnet supported from above N S N S Since unlike poles repel each other, the magnet will rotate Stationary Magnet 2 Basics N S Stationary Magnet 3 Basics N N S S Stationary
More informationPretest Module 21 Units 1-4 AC Generators & Three-Phase Motors
Pretest Module 21 Units 1-4 AC Generators & Three-Phase Motors 1. What are the two main parts of a three-phase motor? Stator and Rotor 2. Which part of a three-phase squirrel-cage induction motor is a
More informationStarting of Induction Motors
1- Star Delta Starter The method achieved low starting current by first connecting the stator winding in star configuration, and then after the motor reaches a certain speed, throw switch changes the winding
More informationSIDDHARTH GROUP OF INSTITUTIONS :: PUTTUR
SIDDHARTH GROUP OF INSTITUTIONS :: PUTTUR Siddharth Nagar, Narayanavanam Road 517583 QUESTION BANK (DESCRIPTIVE) Subject with Code : ET(16EE212) Year & Sem: II-B.Tech & II-Sem UNIT I DC GENERATORS Course
More informationINSTITUTE OF AERONAUTICAL ENGINEERING Dundigal, Hyderabad
INSTITUTE OF AERONAUTICAL ENGINEERING Dundigal, Hyderabad - 500 043 MECHANICAL ENGINEERING ASSIGNMENT Name : Electrical and Electronics Engineering Code : A40203 Class : II B. Tech I Semester Branch :
More informationINTRODUCTION. AC motor operations, most widely used motor is three phase induction motor. This type of motor does not require any starting device
Modular Application (AC Motors) Engineering and Technical Teaching Equipment AEL-AI12 INTRODUCTION An electrical motor is such an electromechanical device which converts electrical energy into a mechanical
More informationDepartment of Electrical and Computer Engineering
Page 1 of 1 Faculty of Engineering, Architecture and Science Department of Electrical and Computer Engineering Course Number EES 612 Course Title Electrical Machines and Actuators Semester/Year Instructor
More informationSQA Advanced Unit specification: general information
SQA Advanced Unit specification: general information Unit title: Electrical Machine Principles Unit code: HT83 47 Superclass: XJ Publication date: August 2017 Source: Scottish Qualifications Authority
More information694 Electric Machines
694 Electric Machines 9.1 A 4-pole wound-rotor induction motor is used as a frequency changer. The stator is connected to a 50 Hz, 3-phase supply. The load is connected to the rotor slip rings. What are
More informationELECTRICAL MACHINES-II LABORATORY MANUAL
ELECTRICAL MACHINES-II LABORATORY MANUAL T. ANIL KUMAR Associate Professor Department of Electrical and Electrical Engineering N. SINDHU Assistant Professor Department of Electrical and Electrical Engineering
More informationThree-Phase Induction Motor With Frequency Inverter
Objectives Experiment 9 Three-Phase Induction Motor With Frequency Inverter To be familiar with the 3-phase induction motor different configuration. To control the speed of the motor using a frequency
More informationELECTRIC MACHINES EUROLAB 0.3 kw
index SINGLE-PHASE MOTORS SPLIT-PHASE MOTOR DL 30130 CAPACITOR MOTOR DL 30140 UNIVERSAL MOTOR DL 30150 REPULSION MOTOR DL 30170 THREE PHASE ASYNCHRONOUS MOTORS SQUIRREL CAGE THREE PHASE ASYNCHRONOUS MOTOR
More informationDate: Name: ID: LABORATORY EXPERIMENT NO. 8 INDUCTION MOTOR/GENERATOR 8-1
Date: Name: ID: LABORATORY EXPERIMENT NO. 8 INDUCTION MOTOR/GENERATOR 8-1 OBJECT 1. To determine the general performance of a squirrel motors 2. To observe the characteristics of induction generators.
More information(d) None of the above.
Dr. Mahalingam College of Engineering and Technology, Pollachi-3 (An Autonomous Institution affiliated to Anna niversity) CCET II (2016 Regulation) Name of Programme: B.E. (EEE) Course Code & Course Title:
More informationFATIMA MICHAEL COLLEGE OF ENGINEERING & TECHNOLOGY Senkottai Village, Madurai Sivagangai Main Road, Madurai
Department of Mechanical Engineering QUESTION BANK SUBJECT NAME: ELECTRICAL DRIVES AND CONTROL YEAR / SEM: II / III UNIT I INTRODUCTION PART-A (2 MARKS) 1. Define Drives 2. Define Electric Drives. 3. What
More informationPretest Module 21 Unit 4 Single-Phase Motors
Pretest Module 21 Unit 4 Single-Phase Motors 1. What are the four main components of a single-phase motor? Rotor, stator, centrifugal switch, end bells and bearings 2. How is a rotating field created in
More informationROTOR RESISTANCE SPEED CONTROL OF WOUND ROTOR INDUCTION MOTOR
1 Electrical Machines Lab Experiment-No. ROTOR RESISTANCE SPEED CONTROL OF WOUND ROTOR INDUCTION MOTOR AIM: To vary the speed of the wound rotor induction motor using rotor rheostat control. Theory The
More informationMotor Protection Fundamentals. Motor Protection - Agenda
Motor Protection Fundamentals IEEE SF Power and Energy Society May 29, 2015 Ali Kazemi, PE Regional Technical Manager Schweitzer Engineering Laboratories Irvine, CA Copyright SEL 2015 Motor Protection
More information9/7/2010. Chapter , The McGraw-Hill Companies, Inc. MOTOR CLASSIFICATION. 2010, The McGraw-Hill Companies, Inc.
Chapter 2 MOTOR CLASSIFICATION 1 In general, motors are classified according to the type of power used (AC or DC) and the motor's principle of operation. AC DC Motor Family Tree 2 DC MOTOR CONNECTIONS
More informationVALLIAMMAI ENGINEERING COLLEGE MECHANICAL ENGINEERING ANNA UNIVERSITY CHENNAI II YEAR MECH / III SEMESTER EE6351 - ELECTRICAL DRIVES AND CONTROL (REGULATION 2013) UNIT I INTRODUCTION PART-A (2 MARKS) 1.
More informationSYNCHRONOUS GENERATOR (ALTERNATOR)
i SYLLABUS osmania university UNIT - I SYNCHRONOUS MACHINES Constructional Details, Types of Windings, Winding Factors, EMF Equation, Fractional Pitch and Fractional Slot Windings, Suppression of Harmonics
More informationSYLLABUS 1. SYNCHRONOUS GENERATOR 9 2. SYNCHRONOUS MOTOR 8
SYLLABUS 1. SYNCHRONOUS GENERATOR 9 Constructional details Types of rotors emf equation Synchronous reactance Armature reaction Voltage regulation EMF, MMF, ZPF and A.S.A methods Synchronizing and parallel
More informationINDUCTION MOTORS 1. OBJECTIVE 2. SAFETY
INDUCTION MOTORS 1. OBJECTIE To study a 3-phase induction motor, by using its experimentally developed equivalent circuit diagram and by obtaining its basic characteristics: torque/slip, current/slip and
More informationElectrical Machines -II
Objective Type Questions: 1. Basically induction machine was invented by (a) Thomas Alva Edison (b) Fleming (c) Nikola Tesla (d) Michel Faraday Electrical Machines -II 2. What will be the amplitude and
More informationELECTRICAL MAINTENANCE
ELECTRICAL MAINTENANCE II PRACTICAL JOURNAL DATA 1 EXPERIMENT NO. 1 AIM: TO FIND VOLTAGE RATIO OF A GIVEN TRANSFORMER. CIRCUIT DIAGRAM: OBSERVATION TABLE: Sr.No. 1 2 3 4 Primary Voltage (V 1 ) Secondary
More informationELECTRIC DRIVES N.K. DE P.K. SEN
ELECTRIC DRIVES N.K. DE P.K. SEN Electric Drives NISIT K. DE Associate Professor Department of Electrical Engineering Indian Institute of Technology Kharagpur and PRASANTA K. SEN Assistant Professor Department
More informationTYPES OF SINGLE PHASE INDUCTION MOTOR EBOOK
28 March, 2018 TYPES OF SINGLE PHASE INDUCTION MOTOR EBOOK Document Filetype: PDF 275.98 KB 0 TYPES OF SINGLE PHASE INDUCTION MOTOR EBOOK So this is the reason of using capacitor in the single phase induction
More informationELECTRIC MACHINES EUROLAB 0.3 kw
index SINGLE-PHASE MOTORS SPLIT-PHASE MOTOR DL 30130 CAPACITOR MOTOR DL 30140 UNIVERSAL MOTOR DL 30150 REPULSION MOTOR DL 30170 THREE PHASE ASYNCHRONOUS MOTORS SQUIRREL CAGE THREE PHASE ASYNCHRONOUS MOTOR
More informationScope for Electrical Machine Design. Objectives. Design and Engineering. Course Description. 23-Dec-16 DESIGN OF ELECTRICAL MACHINES AN OVERVIEW
SNS COLLEGE OF ENGINEERING (Accredited by NAAC-UGC with A Grade, Approved by AICTE, Recognized by UGC and Affiliated to Anna University, Chennai) COIMBATORE 641 107 DEPARTMENT OF ELECTRICAL AND ELECTRONICS
More informationSyllabus for the Trade of Electrician Duration : Six Month Second Semester Semester Code: ELE: SEM II
Syllabus for the Trade of Electrician Duration : Six Month Second Semester Semester Code: ELE: SEM II Week Trade practical No. 1-2 Different wave shapes of rectifiers and their values using C.R.O. Identification
More informationElectrical Machines-I (EE-241) For S.E (EE)
PRACTICAL WORK BOOK For Academic Session 2013 Electrical Machines-I (EE-241) For S.E (EE) Name: Roll Number: Class: Batch: Department : Semester/Term: NED University of Engineer ing & Technology Electrical
More informationUnit III-Three Phase Induction Motor:
INTRODUCTION Unit III-Three Phase Induction Motor: The three phase induction motor runs on three phase AC supply. It is an ac motor. The power is transferred by means of induction. So it is also called
More informationELECTRIC MACHINES OPENLAB 0.2 kw
THIS SYSTEM IS A COMPLETE SET OF COMPONENTS AND MODULES SUITABLE FOR ASSEMBLING THE ROTATING ELECTRIC MACHINES, BOTH FOR DIRECT CURRENT AND FOR ALTERNATING CURRENT. STUDENTS CAN PERFORM A CRITICAL AND
More informationDHANALAKSHMI SRINIVASAN COLLEGE OF ENGINEERING AND TECHNOLOGY MAMALLAPURAM, CHENNAI
DHANALAKSHMI SRINIVASAN COLLEGE OF ENGINEERING AND TECHNOLOGY MAMALLAPURAM, CHENNAI -603104 DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING QUESTION BANK VII SEMESTER EE6501-Power system Analysis
More informationFachpraktikum Elektrische Maschinen. Theory of Induction Machines
Fachpraktikum Elektrische Maschinen Theory of Induction Machines Prepared by Arda Tüysüz January 2013 Fundamentals Induction machines (also known as asynchronous machines) are by far the most common type
More informationThe Wound-Rotor Induction Motor Part II
Experiment 2 The Wound-Rotor Induction Motor Part II OBJECTIVE To determine the starting characteristics of the wound-rotor induction motor. To observe the rotor and stator currents at different motor
More informationElectricity Course. Part B Course Outline
Electricity Course Rev. Date: 10/01/2002 By: R. Crompton Part B Course Outline Subject Area 0 Orientation 2.6 0.0 0.1 To the School 1.0 0.2 To the Course 1.0 0.3 To the 0.3 0.3 0.4 To Possible Emergencies
More informationINDUCTION MOTOR. There is no physical electrical connection to the secondary winding, its current is induced
INDUCTION MOTOR INTRODUCTION An induction motor is an alternating current motor in which the primary winding on one member (usually the stator) is connected to the power source and a secondary winding
More informationAXIAL FLUX PERMANENT MAGNET BRUSHLESS MACHINES
AXIAL FLUX PERMANENT MAGNET BRUSHLESS MACHINES Jacek F. Gieras, Rong-Jie Wang and Maarten J. Kamper Kluwer Academic Publishers, Boston-Dordrecht-London, 2004 TABLE OF CONTENETS page Preface v 1. Introduction
More information5. The force required to bring an object weighing 65 lb from rest to a speed of 50 fps in 10 sec is approximately
Student ID: 53703105 Exam: 4341RR - Industrial Motor Applications When you have completed your exam and reviewed your answers, click Submit Exam. Answers will not be recorded until you hit Submit Exam.
More informationStator rheostat, Autotransformer Star to Delta starter and rotor resistance starter.
UNIT-IV 1.What are the types of starters? Stator rheostat, Autotransformer Star to Delta starter and rotor resistance starter. 2. List out the methods of speed control of cage type 3-phase induction motor?
More informationEE6351 ELECTRIC DRIVES AND CONTROL UNIT-1 INTRODUTION
EE6351 ELECTRIC DRIVES AND CONTROL UNIT-1 INTRODUTION 1. What is meant by drive and electric drive? Machines employed for motion control are called drives and may employ any one of the prime movers for
More informationELECTRICAL MACHINES I
PRACTICAL WORK BOOK ELECTRICAL MACHINES I EX-404 Name: Enrollment No: Branch: Semester: Batch: Department of Electrical Engineering Name of Laboratory : Electrical Machine - I Lab Subject Code : Ex 404
More informationECET 211 Electric Machines & Controls Lecture 5-1 Electric Motors. Lecture 5-1 Electric Motors
ECET 211 Electric Machines & Controls Lecture 5-1 Electric Motors (2 of 4) Text Book: Chapter 5 Electric Motors, Electric Motors and Control Systems, by Frank D. Petruzella, published by McGraw Hill, 2015.
More informationSynchronous Generators I. EE 340 Spring 2011
Synchronous Generators I EE 340 Spring 2011 Construction of synchronous machines In a synchronous generator, a DC current is applied to the rotor winding producing a rotor magnetic field. The rotor is
More informationCHAPTER 1 INTRODUCTION
CHAPTER 1 INTRODUCTION 1.1 CONSERVATION OF ENERGY Conservation of electrical energy is a vital area, which is being regarded as one of the global objectives. Along with economic scheduling in generation
More informationINTRODUCTION. I.1 - Historical review.
INTRODUCTION. I.1 - Historical review. The history of electrical motors goes back as far as 1820, when Hans Christian Oersted discovered the magnetic effect of an electric current. One year later, Michael
More informationSt.MARTIN S ENGINEERING COLLEGE Dhulapally, Secunderabad
St.MARTIN S ENGINEERING COLLEGE Dhulapally, Secunderabad-500 014 Subject: STATIC DRIVES Class : EEE III TUTORIAL QUESTION BANK Group I QUESTION BANK ON SHORT ANSWER QUESTION UNIT-I 1 What is meant by electrical
More informationElectromechanical Training System
Electromechanical Training System LabVolt Series Datasheet Festo Didactic en 240 V - 50 Hz 06/2018 Table of Contents General Description 2 Courseware 3 Modular Design Approach 4 Features & Benefits 4 List
More informationINSTITUTE OF AERONAUTICAL ENGINEERING (Autonomous) Dundigal, Hyderabad DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING
Course Name Course Code Class Branch INSTITUTE OF AERONAUTICAL ENGINEERING (Autonomous) Dundigal, Hyderabad - 500 0 DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING : Static Drives : A60225 : III -
More informationApplication of AC Dahlander Three-Phase Induction Motor AEL-ACDHA
Engineering and Technical Teaching Equipment Application of AC Dahlander Three-Phase Induction Motor AEL-ACDHA INTRODUCTION The electric motors are devices capable of transforming electrical energy into
More informationPlanning and Commissioning Guideline for NORD IE4 Motors with NORD Frequency Inverters
Planning and Commissioning Guideline for NORD IE4 Motors with NORD Frequency Inverters General Information From their basic function, motors with efficiency class IE4 are synchronous motors and are suitable
More informationMATHEMATICAL MODELING AND SPEED TORQUE ANALYSIS OF THREE PHASE SQUIRREL CAGE INDUCTION MOTOR BY USING MATLAB/SIMULINK
MATHEMATICAL MODELING AND SPEED TORQUE ANALYSIS OF THREE PHASE SQUIRREL CAGE INDUCTION MOTOR BY USING MATLAB/SIMULINK Muhammad Umair Abid, Tahir Sajjad,NaiemArif, Saqib Zafar, Muhammad Tayyab, Engr.Majid
More informationThree-Phase Motors and Drives
Unit 63: Three-Phase Motors and Drives Unit code: QCF Level 3: Credit value: 10 Guided learning hours: 60 Aim and purpose K/600/7117 BTEC Nationals This unit aims to give learners knowledge of three-phase
More informationPower and machines Program
Bachelor Degree Power and machines Program Dept. of Electrical Engineering Course specification Electrical Testing (A-B) اختبارات كهربية )أ- ب( EP324 1. Course Aim Main Aim To apply the theory of electrical
More informationTraining Systems for Drive Technology, Power Electronics & Electrical Machines
Training Systems for Drive Technology, Power Electronics & Electrical Machines Acquiring Hands-On, Project-Oriented Technical Competence 4 th Edition Contents Obtaining Technical Skills and Qualifications
More informationSIMULINK Based Model for Determination of Different Design Parameters of a Three Phase Delta Connected Squirrel Cage Induction Motor
IOSR Journal of Electrical and Electronics Engineering (IOSR-JEEE) e-issn: 2278-1676,p-ISSN: 2320-3331, Volume 7, Issue 4 (Sep. - Oct. 2013), PP 25-32 SIMULINK Based Model for Determination of Different
More informationWORK BENCHES FOR ELECTRIC INSTALLATIONS. index
index WORK BENCHES TWO PLACE WORK BENCH WITH 2 INDEPENDENT SUPPLIES DL 1101 FOUR PLACE WORK BENCH WITH 4 INDEPENDENT SUPPLIES DL 1103 FOUR PLACE WORK BENCH WITH 2 INDEPENDENT SUPPLIES DL 1104 TWO PLACE
More informationAUCOM WHITE PAPER SERIES GET YOUR MOTOR RUNNING. An introduction to reduced voltage starting of three phase induction motors
AUCOM WHITE PAPER SERIES GET YOUR MOTOR RUNNING An introduction to reduced voltage starting of three phase induction motors GET YOUR MOTOR RUNNING WHITE PAPER #1 Reduced voltage starting of three phase
More informationAEL-4. Advanced Electrical Laboratories (AEL-LABS): Electromechanical Constructions Lab. Engineering and Technical Teaching Equipment
Engineering and Technical Teaching Equipment Advanced Electrical Laboratories (AEL-LABS): Electromechanical Constructions Lab AEL-4 PRODUCTS 40.- ELECTRICITY AEL-1. ELECTRICAL INSTALLATIONS LAB AEL-2.
More informationGUJARAT TECHNOLOGICAL UNIVERSITY, AHMEDABAD, GUJARAT. Course Curriculum. D C MACHINES AND TRANSFORMERS (Code: ) Electrical Engineering
GUJARAT TECHNOLOGICAL UNIVERSITY, AHMEDABAD, GUJARAT Course Curriculum D C MACHINES AND TRANSFORMERS (Code: 3330902) Diploma Programme in which this course is offered Semester in which offered Electrical
More informationMANTECH ELECTRONICS. Stepper Motors. Basics on Stepper Motors I. STEPPER MOTOR SYSTEMS OVERVIEW 2. STEPPING MOTORS
MANTECH ELECTRONICS Stepper Motors Basics on Stepper Motors I. STEPPER MOTOR SYSTEMS OVERVIEW 2. STEPPING MOTORS TYPES OF STEPPING MOTORS 1. VARIABLE RELUCTANCE 2. PERMANENT MAGNET 3. HYBRID MOTOR WINDINGS
More informationMotor-Generator and Transformer Construction Application AEL-MGTC
Engineering and Technical Teaching Equipment Motor-Generator and Transformer Construction Application AEL-MGTC INDUCTION MOTOR DISASSEMBLY ISO 9001: Quality Management (for Design, Manufacturing, Commercialization
More informationAxial Flux Permanent Magnet Brushless Machines
Jacek F. Gieras Rong-Jie Wang Maarten J. Kamper Axial Flux Permanent Magnet Brushless Machines Second Edition Springer Contents 1 Introduction 1 1.1 Scope 1 1.2 Features 1 1.3 Development of AFPM Machines
More informationInduction Motor Control
Induction Motor Control A much misunderstood yet vitally important facet of electrical engineering. The Induction Motor A very major consumer of electrical energy in industry today. The major source of
More informationMotor Winding Kit. LabVolt Series. Datasheet
Motor Winding Kit LabVolt Series Datasheet Festo Didactic en 220 V - 60 Hz 07/2018 Table of Contents General Description 2 Optional Equipment Required to Operate the Rotating Machines 3 Features & Benefits
More informationEEE3441 Electrical Machines Department of Electrical Engineering. Lecture. Introduction to Electrical Machines
Department of Electrical Engineering Lecture Introduction to Electrical Machines 1 In this Lecture Induction motors and synchronous machines are introduced Production of rotating magnetic field Three-phase
More informationCOLLEGE OF ENGINEERING DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING QUESTION BANK SUBJECT CODE & NAME : EE 1001 SPECIAL ELECTRICAL MACHINES
KINGS COLLEGE OF ENGINEERING DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING QUESTION BANK SUBJECT CODE & NAME : EE 1001 SPECIAL ELECTRICAL MACHINES YEAR / SEM : IV / VII UNIT I SYNCHRONOUS RELUCTANCE
More informationAC : USING MATLAB TO TEACH ELECTRIC ENERGY COURSES
AC 2012-3239: USING MATLAB TO TEACH ELECTRIC ENERGY COURSES Dr. Max Rabiee P.E., University of Cincinnati Max Rabiee earned his Ph.D. in electrical engineering from the University of Kentucky (U.K.) in
More informationMEBS Utilities services M.Sc.(Eng) in building services Department of Electrical & Electronic Engineering University of Hong Kong
Tutorial 1) A 2900 RPM, 380V, 3 phase, 50Hz, 2 pole, delta connected induction motor has a stator resistance of 0.2 Ω. The rotor resistance referred to the stator is 0.3 Ω. The stator and rotor inductive
More informationFall 1997 EE361: MIDTERM EXAM 2. This exam is open book and closed notes. Be sure to show all work clearly.
NAME: STUDENT NUMBER: Fall 1997 EE361: MIDTERM EXAM 2 This exam is open book and closed notes. Be sure to show all work clearly. 1. 10 points - Mechanical and Electrical Energy Relationships: A dc motor
More informationGuaranteed Technical Particulars(GTP) Deviation/Remarks Specify if any. Computerized Motor testing system suitable to test LV 3 phase motors
Section II - Technical Specification Tender Enquiry No: BUY/EATD(BEE)-01/12-13 Name of the Equipment: MOTOR TESTING SYSTEM Note: The Offers should be submitted only in this format otherwise the offer will
More information