CP600 Communication Protocols

Transcription

1 3ADR023066N0202 F854p_a_CP600_Communication_Protocols_Rev_D, 07/2015 (3ADR023066N0202) CP600 Communication Protocols

2 CP600 Control Panels Contents Communication Protocols ABB Controllers: Drivers List Generic Devices: Drivers List Protocol Editor Ethernet Protocols Configuration ABB CoDeSys ETH ABB Modbus TCP Serial Protocols Configuration ABB Modbus RTU ABB CoDeSys Serial

3 Communication Protocols ABB Controllers Drivers list (1) Protocols PLC models Interface ABB Modbus TCP ABB AC31 Series 90 Ethernet Ethernet ABB AC500-eCo Ethernet ABB PM571, PM572 Ethernet ABB PM59x, PM58x, PM573 Ethernet ABB e100 Motion Product ABB e150 Motion Product ABB Modbus RTU ABB AC31 Series 90 Serial ABB AC500-eCo ABB PM571, PM572 ABB PM59x, PM58x, PM573 ABB NextMove ES / ESB-2 ABB e100 Motion Product ABB e150 Motion Product ABB Modbus ASCII 8 bits ABB Jokab Safety Pluto Safety PLC Serial February 2, 2016 Slide 4

4 Communication Protocols ABB Controllers Drivers list (2) Protocols PLC models Interface ABB CoDeSys ETH TCP/IP_Level2_Route Ethernet ABB_TCP/IP_Level2_AC TCP/IP ABB IRC5 ABB Robotics controller IRC5 Ethernet / TCP IP ABB CoDeSys Serial ABB_RS232_AC Serial Serial_RS232 ABB Mint Controller HCP ABB Motion Products - HCP and HCP2 Serial February 2, 2016 Slide 5

5 Communication Protocols Generic Devices Drivers list Protocols Device models / Drivers Interfaces CODESYS V2 ETH Modbus TCP Server Modbus RTU Server Modbus TCP Modbus RTU System Variables Variables Level2 Level2Route Level4 Modicon Modbus (standard based) Generic Modbus (zero based) Modicon Modbus (standard based) Generic Modbus (zero based) Modicon Modbus (standard based) Generic Modbus (zero based) Modicon Modbus (standard based) Generic Modbus (zero based) Special tags containing information Generic variables Ethernet (Intel/Motorola) Ethernet Serial RS485/RS232/RS422 Ethernet Serial RS485/RS232/RS422 Internal Internal February 2, 2016 Slide 6

6 CP600 Control Panels Coming up Communication Protocols ABB Controllers: Drivers List Generic Devices: Drivers List Protocol Editor Ethernet Protocols Configuration ABB CoDeSys ETH ABB Modbus TCP Serial Protocols Configuration ABB Modbus RTU ABB CoDeSys Serial

7 PB610 - Panel Builder 600 Protocol Editor 1. Double click on the Config/Protocols object in the project tree. 2. Click on the + icon to add a new driver 2 3. Select the driver from the list proposed 4. Once the driver is selected, configure it with the right communication parameters 1 3 Maximum: 4 different protocols can be selected February 2, 2016 Slide 8

8 CP600 Control Panels Coming up Communication Protocols ABB Controllers: Drivers List Generic Devices: Drivers List Protocol Editor Ethernet Protocols Configuration ABB CoDeSys ETH ABB Modbus TCP Serial Protocols Configuration ABB Modbus RTU ABB CoDeSys Serial

9 Ethernet Protocols Configuration ABB CoDeSys Ethernet Driver This driver has been specifically designed to support communication with AC500 CPUs Designed for standardized IEC programming, based on the CODESYS V2.3 system No specific configuration in Automation Builder All variables within the CODESYS project are accessible This driver supports the symbol file (.SYM) upload from AC500 CPU (Symbol file must be created and configured within the CODESYS project) Easy sharing of the variables used between AC500 CPUs and CP600 HMI panels February 2, 2016 Slide 10

10 Ethernet Protocols Configuration ABB CoDeSys Ethernet Driver - Download Symbol File CODESYS\ In Resources/Target Settings Activate the automatic download symbol file option, the symbol file will be transferred in AC500 CPU with the project 1. Click on the tab General 2. Activate the checkbox Download symbol file and OK 1 2 February 2, 2016 Slide 11

11 Ethernet Protocols Configuration ABB CoDeSys Ethernet Driver - Configure Symbol File In CODESYS\Project\Options Activate the checkbox Dump symbol entries 2. Click on button Configure symbol file 3. Select the program parts or variables list need to be to share 4. Activate the checkboxes wished and valid by OK 4 February 2, 2016 Slide 12

12 Ethernet Protocols Configuration ABB CoDeSys Ethernet Driver Creation Symbol File In CODESYS project \Project 1. Select Clean all 2. Select Rebuild all 2 1 After Clean all and Rebuild all operation the symbol files will create automatically in project directory and they will be transferred in AC500 CPU with the download operation.sdb (Binary file).sym (ASCII file) February 2, 2016 Slide 13

13 Ethernet Protocols Configuration ABB CoDeSys Ethernet Driver Export Symbol File In Automation Builder project 1. Right-click on Application 2. Then select Export 3. And select Symbol file 4. Finally select the desired location path to save symbol file on PC February 2, 2016 Slide 14

14 Ethernet Protocols Configuration ABB CoDeSys Ethernet Driver Set Protocol in PB610 In PB610 project \ Protocols 1. Select ABB CoDeSys ETH driver 2. Enter the CPU IP Address, and port number Choose in the PLC models, Motorola byte order 4. Select the Protocol type used 5. Activate checkbox PLC network to allow the connection of multiple PLCs to one panel February 2, 2016 Slide 15

15 Ethernet Protocols Configuration ABB CoDeSys Ethernet Driver Import Symbol File.sym 1. Double click on the Config/Tags object in the project tree 2. Select the driver used 3. Click on button Import Tags 4. Locate the.sym file and valid by OK February 2, 2016 Slide 16

16 Ethernet Protocols Configuration ABB CoDeSys Ethernet Driver Assign Symbol File 1. Select the variables wished in the imported list 2. Click on button Import Tags 3. The variables will be implemented in tag list in order to use them in project February 2, 2016 Slide 17

17 CP600 Control Panels Coming up Communication Protocols ABB Controllers: Drivers List Generic Devices: Drivers List Protocol Editor Ethernet Protocols Configuration ABB CoDeSys ETH ABB Modbus TCP Serial Protocols Configuration ABB Modbus RTU ABB CoDeSys Serial

18 Ethernet Protocols Configuration ABB Modbus TCP Driver This driver has been specifically designed to support communication with AC500 CPUs Modbus TCP/IP Protocol has to be inserted in Automation Builder configuration to activate it on AC500 CPU The specific memory variables %M and %R must be used and only these variables can be shared. This driver supports the export file (.EXP) from CODESYS Easy sharing of the variables used between AC500 CPUs and CP600 HMI panel February 2, 2016 Slide 19

19 Ethernet Protocols Configuration ABB Modbus TCP Driver Create Export File (.exp) In CODESYS project \Resources\Global Variables 1. Create a dedicated variables list for data exchange via Modbus 1 2. Insert all needed variables (%M or %R) 2 3. Select Project\Export object 4. Select the variable list containing the data for CP600 communication 5. And export the list (.exp file) 3 4 February 2, 2016 Slide 22

20 CP600 Control Panels Coming up Communication Protocols ABB Controllers: Drivers List Generic Devices: Drivers List Protocol Editor Ethernet Protocols Configuration ABB CoDeSys ETH ABB Modbus TCP Serial Protocols Configuration ABB Modbus RTU ABB CoDeSys Serial

21 Serial Protocols Configuration ABB Modbus RTU Driver This driver has been specifically designed to support communication with AC500 CPUs The CP600 HMI panel will be connected to the Modbus network as the master device. ABB Modbus RTU Protocol has to be inserted in Automation Builder configuration to activate it on AC500 CPU or on CM574-RS communication module The specific memory variables %M and %R must be used and only these variables can be shared. This driver supports the export file (.EXP) from CODESYS Easy sharing of the variables used between AC500 CPUs and CP600 HMI panel February 2, 2016 Slide 27

22 Ethernet Protocols Configuration ABB Modbus RTU Driver Create Export File (.exp) In CODESYS project \Resources\Global Variables 1. Create a dedicated variables list for data exchange via Modbus 1 2. Insert all needed variables (%M or %R) 2 3. Select Project\Export object 4. Select the variable list containing the data for CP600 communication 5. And export the list (.exp file) 3 4 February 2, 2016 Slide 31

23 CP600 Control Panels Coming up Communication Protocols ABB Controllers: Drivers List Generic Devices: Drivers List Protocol Editor Ethernet Protocols Configuration ABB CoDeSys ETH ABB Modbus TCP Serial Protocols Configuration ABB Modbus RTU ABB CoDeSys Serial

24 Serial Protocols Configuration ABB CoDeSys Serial Driver This driver has been specifically designed to support communication with AC500 CPUs No specific configuration in Automation Builder The ABB CoDeSys serial driver supports only RS232 connections All variables within the CODESYS project are accessible This driver supports the symbol file (.sym) upload from AC500 CPU (Symbol file can be created and configured within the CODESYS project) Easy sharing of the variables used between AC500 CPUs and CP600 HMI panels February 2, 2016 Slide 36

25