Earthing devices and rods
|
|
- Felicia Woods
- 5 years ago
- Views:
Transcription
1 Earthing devices and rods High-quality safety equipment for all situations. Designed and developed by electricians PRODUCT CATALOGUE SAB ELTEKNIK AB PHONE
2 Contents Rod cleaning BOOM cleaning cloths for insulated cherry-picker 4 RUBBER for cleaning rubber details 4 S1 for cleaning fibreglass rods 4 W1 wax and polishing cloth for insulated rods 4 GRIME AWAY tool cleaning 4 Operating rods and accessories Telescopic operating rod for indoor and outdoor use 5 Operating rod for indoor and outdoor use 5 Operating rod for indoor use 5 Bag for operating rods 5 Bag for operating rods 5 Operating rods and safety rods Operating rod MG 6 Safety rods 6 Rod adaptors Adapter K mount 7 Adapter 7 Adapter 7 Adapter TAG/JGS 7 K mount with UNC 3/4 thread 7 Operating sockets and other accessories Operating sockets 8 Fuse holder 8 Fuse holder Gevea fuses 8 Safety rod 8 Pole saw adapter mount 8 Cutting tool 9 Telescopic rod BMT-S 9 Pole saw Samurai 9 Snow removal stick 9 Combined earthing Triple-phase earthing for ball bolt and round conductor 10 Triple-phase serial earthing for ball bolt and round conductor 10 Line earthing Line earthing RGLF 11 Line earthing S-GLF 11 Earth lead with UKP clamp 12 Earth lead with RGLF rod 12 Earth lead on spool 12 Earth lead with MT8401 clamp 12 Line earthing Distribution earthing Triple-phase earthing device for ball bolt and round conductor 14 Triple-phase earthing device for rail and round conductor 14 Clamps Clamps 15 Rod mount 15 Earth connectors Earthing clamps 16 Earthing clamps 16 Ball bolt 16 Cables Cu cable 16 2 SAB ELTEKNIK AB PHONE INFO@SABP.SE
3 Improved safety with correct earthing tools Our foundation rests on first-class components from carefully selected suppliers. SAB Elteknik combines the components and refines them into complete safety products that are tailored to your specific situation. In other words, we provide you with the right earthing tools and thereby contribute to a safer workplace. An agency with the French company CATU was starting point for our earthing devices and safety instruments. CATU is a world leader in energy safety and we offer their high-voltage testers and phase comparators. In-house product development is another important aspect. Our GLF and UKP earthing devices that have also become popular abroad, are two excellent examples. Do you have any questions about earthing devices or would you like a tailor-made product? Feel free to contact us. We would be happy to help. SAB ELTEKNIK AB PHONE INFO@SABP.SE 3
4 Rod cleaning BOOM cleaning cloths for insulated cherry-picker Pre-soaked cleaning cloths for very dirty insulated fibreglass details on insulated cherry-pickers. BOOM removes dirt and stains without destroying the gel-coat and provides a protective surface. The cloths are packaged in plastic envelopes for environmental care and to to minimise waste. SAB no E no Designation Weight, kg B1, cleaning cloth, 24 x24, 24 pcs/pack 0.5 kg BD-72, bucket w/ 72 cloths, 10 x12, 6 pcs/pack 1.5 kg RUBBER for cleaning rubber details Designed for cleaning rubber details such as insulating gloves, insulating mats, rubber blankets, rubber cables for earthing devices and shunts, etc. RUBBER is harmless to both user and the environment and cleans without drying out the rubber details. SAB no E no Designation Weight, kg RBG-D72, bucket with 72 cloths, 6 pcs/ 1.5 kg pack BD-72, bucket w/ 72 cloths, 10 x12, kg pcs/pack RBG-35LR, 1 litre spray can, 4 pcs/pack 1.0 kg Cleaning cloth for rubber details RBG-D72 6 pcs/pack 1.5 kg S1 for cleaning fibreglass rods S1 both cleans and leaves a hydrophobic surface on the insulating rod without affecting the coating. In spite of it mild properties, it removes dirt and stains without problems and thanks to its short drying times the tools is ready for use quickly. SAB no E no Designation Weight, kg S1, cleaning cloth, 144 pcs/pack 0.1 kg W1 wax and polishing cloth for insulated rods Bad surface coating on an insulating rod or other insulated part of fibreglass is dangerous if the hydrophobic surface is faulty. The W1 cloths wax and polish the rod and retain a hydrophobic and dirt-repelling surface for safe use. W1 is also used on rubber details, composite materials and porcelain, and is easy to use. One envelope contains one wax cloth and one polishing cloth. We recommend cleaning with S1 before applying wax with W1. SAB no E no Designation Weight, kg W1, wax and polishing cloth, 72 pcs/pack 0.1 kg GRIME AWAY tool cleaning A substance for cleaning very dirty tools, which also rehydrates and and moisturises the hands. The cloths are delivered pre-soaked in a bucket for environmental care and to to minimise waste. SAB no E no Designation Weight, kg Bucket with 72 cloths, 6 pcs/pack 1.0 kg 4 SAB ELTEKNIK AB PHONE INFO@SABP.SE
5 Operating rods and accessories Telescopic operating rod for indoor and outdoor use In compliance with IEC Telescopic operating rod in two parts Foam-filled top. Lock button. Insulation Length, SAB no E no kv Model mm Weight, kg 60CE421C E kV Telescopic operating rod CE421 with C-attachment 60CE421K E kV Telescopic operating rod CE421 with K-fäste 1150 mm 1.7 kg 1150 mm 1.85 kg Operating rod for indoor and outdoor use In compliance with IEC Rain collar Ø 100 mm Isolation Length, SAB no E no kv Model mm Weight, kg 60CE421C 40kV Operating rod CF mm 1.5 kg with C-attachment 60CF540E 40kV Operating rod CF mm 1.5 kg with E-attachment 60CF540K 40kV Operating rod CF mm 1.5 kg with K-attachment 60CF540X E kV Operating rod 1500 mm 1.5 kg CF540X with E-attachment Operating rod for indoor use Insulation Length, SAB no E no kv Model mm Weight, kg 60CE75C E kV Telescopic operating 1150/ 1.2 kg rod CE75 with 2000 mm C-attachment 60CF372K 72,5kV Telescopic operating 1500 mm 0.9 kg rod CF372 with K-attachment Bag for operating rods SAB no E no Length Weight, kg 60CM m 60CM m 60CM m Bag for operating rods SAB no E no Length Qty Weight, kg 60CM m 5 rods 60CM m 5 rods 60CM m 5 rods SAB ELTEKNIK AB PHONE INFO@SABP.SE 5
6 Operating rods, safety rods Operating rod MG In compliance with IEC Operating rod with threaded mount for connecting operating socket JGS or other tools. SAB no Insulation kv Model Length, mm Weight, kg MGV U kg MGV U kg MGV U kg MTV 150 K4 Telescopic kg MTV 150 K5 Telescopic kg MTV 201 K3 Telescopic kg MTV 201 K4 Telescopic kg MTV 201 K5 Telescopic kg Protective DFO kg case Protective case DFO kg Fuse disconnection rod Safety rods 12-36kV with straight or offset head. SAB no E no Type Measurements Weight, kg K 1010x40 mm 1.70 kg KG 1010x40 mm 1.85 kg 6 SAB ELTEKNIK AB PHONE INFO@SABP.SE
7 Rod adaptors Adapter K mount K mount, snap-on lock for GLF and fits Stålskog. SAB no E no Length Weight, kg 60ADAP-SAB E kg Adapter Adapter with K mount for tools and C mount for rod. SAB no E no Length Weight, kg 60CI4K E kg Adapter Adapter with K mount for tools and E mount for rod. SAB no E no Length Weight, kg 60CI7K E kg Adapter TAG/JGS The adapter TAG/JGS is pushed into the the operating socket JGS, which is mounted on the operating rod. Made from polyethylene plastic. SAB no E no Length Weight, kg mm 0.10 kg K mount with UNC 3/4 thread Suitable for Telescopic rod BMT-S. SAB no E no Model Weight, kg K mount with UNC 3/4 thread 0.2 kg SAB ELTEKNIK AB PHONE INFO@SABP.SE 7
8 Operating sockets and other accessories Operating sockets Ball-joint operating socket for easy connection of clamps. SAB no Model Measurements, mm Weight, kg Ball-joint JGS x kg Fixed JGS x kg Fuse holder For use with MTV/MGV rods. SAB no Model Measurements, mm Weight, kg MGA87 for GEVEA 155x80 mm 0.30 kg SMSA for tube fuses Length 735 mm 0.90 kg Fuse holder Gevea fuses Fits rod mount 3/4 Unc. SAB no Model Measurements, mm Weight, kg Fuse holder Gevea fuses 155x80x80 mm 0.3 kg 3/4 UNC Fuse disconnection for rod Fits the mount on the MTV/MGV rods. Used for applying and removing high-capacity. tube fuses mm in diameter. SAB no Model Measurements, mm Weight, kg DSG 90 VF 200x180 mm 0.60 kg Pole saw adapter mount Fits the mount on the MTV/MGV rods. SAB no Model Measurements, mm Weight, kg MFH 19, ¾ 75x50 mm 0.20 kg MKS/MBT 3/8 and ¾ 0.30 kg 8 SAB ELTEKNIK AB PHONE INFO@SABP.SE
9 Cutting tool, telescopic rod, pole saw Cutting tool Fits the mount on the MTV/MGV rods. Cutting capacity 35 mm² Cu wire and 25 mm² soft Fe wire. SAB no Model Measurements, mm Weight, kg DRS kg Telescopic rod BMT-S Telescopic rod made from reinforced fibreglass pipes. The upper part is filled with foam in accordance with IEC The length of each section can be adjusted as required by means of lock rings. Adapter for K mount (type for voltage tester) included when purchasing rod with a 3/4 UNC mount. It is intended as a pole saw and can also be used to control the voltage in the selected area. When in use, the upper section should always be fully extended. The rod is manufactured in accordance with standard EN Care instructions: Be careful with the upper section, which is insulated. SAB no Designation Tool Length Qty Weight, kg mount sections Telescopic rod BMTS / Pole saw Telescopic rod BMTS / Pole saw Telescopic rod BMTS / Pole saw Telescopic rod BMTS / Pole saw Telescopic rod BMTS / Pole saw Telescopic rod BMTS / Pole saw Case for telescopic rod BMTS Thread mount UNC 3/4 Universal K mount Thread mount UNC 3/4 Universal K mount Thread mount UNC 3/4 Universal K mount 8.75 m kg 8.75 m kg 12 m kg 12 m kg 6 m kg 6 m kg Pole saw Samurai Complete Saw blade with 34 UNC fitting including protective case. Product no SAB no E no Description Weight, kg E Complete saw blade with mount 0.4 kg Protective case in leather for Samurais saw blade 0.4 kg E Saw blade Samurai 0.2 kg Chipper knife to saw blade Samurai 0.1 kg Adapter Samuraiblade / tvig rod, 3/4 thread 0.2 kg Snow removal stick Fits the MTV rods. For removal of snow and ice from overhead lines. SAB no Model Measurements, mm Weight, kg SLD x20 mm 0.50 kg SAB ELTEKNIK AB PHONE INFO@SABP.SE 9
10 Combined earthing Triple-phase earthing for ball bolt and round conductor For connecting to: Ball bolt 20 and 25 mm Round conductor max 329 mm² The kit contains: 3 KP bayonet clamps for JGS Stålskog operating socket or for KP rod. 3 device cables 1 earthing cable with fast coupling Storage case Operating rod can be ordered separately. Earth lead can be ordered separately. SAB no E no Icc (ka/s) Area mm² Clamps Cable length Operating rod E MT1911E1 2x2,0+1,0 m E-attachment E MT1911E1 2x2,0+1,0 m E-attachment E MT1911E1 2x2,0+1,0 m E-attachment 10 SAB ELTEKNIK AB PHONE INFO@SABP.SE
11 Line earthing Line earthing RGLF RGLF 3 for phase connection: 3 operating rods, length 1.5 m. One rod can be used as voltage tester. 3 clamps with fast buttress thread for wire, max 329 mm² 2 device cables, length 2.5 metres 1 earthing cable, 1.5 m, with fast coupling for connecting earthing cable or a fourth rod. RGLF 1 for earth connection consists of: 1 operating rod with earth clamp, same as RGLF3 1 earthing cable with bayonet connector. The lower picture displays the steel suspension hooks and the snap-on mount on the removable rod for voltage testing. The rod is filled with foam and manufactured in accordance with standard EN SAB no E no Model Designation Rod Weight, kg E RGLF3/25 Line earthing with three rods 25 mm² 2+2,5+1 m 1.5 m E RGLF1/25 Earthing rod 25 mm² 1.5 m 1.5 m E RGLF3/35 Line earthing with three rods 35 mm² 2+2,5+1 m 1.5 m E RGLF1/35 Earthing rod 35 mm² 1.5 m 1.5 m E RGLF3/50 Line earthing with three rods 50 mm² 2+2,5+1 m 1.5 m E RGLF1/50 Earthing rod 50 mm² 1.5 m 1.5 m 3 Line earthing S-GLF S-GLF 3 consists of: 3 GLF clamps that can handle cables of 329 mm², with bayonet for the JGS operating socket (Stålskog) 2 device cables, length 2.0 metres 1 earthing cable, 1.5 m, with fast coupling for connecting earthing cable with clamp. SAB no Type Area, mm² Rod Weight, kg S-GLF3/25 25 MGV U S-GLF3/35 35 MGV U S-GLF3/50 50 MGV U 24 SAB ELTEKNIK AB PHONE INFO@SABP.SE 11
12 Earth lead Earth lead with UKP clamp For connecting to: Ball bolt 20 and 25 mm Round conductor max 329 mm² The kit contains: 1 KP bayonet clamp for JGS Stålskog operating socket or for KP rod. 1 device cable Operating rod can be ordered separately. SAB no E no Area mm² Clamps Cable length Operating rod E Universal UKP/JGS 1.0 m MGV U E Universal UKP/JGS 1.0 m MGV U E Universal UKP/JGS 1.0 m MGV U 24 Earth lead with RGLF rod For connecting to: Round conductor max 329 mm² and girder The kit contains: RGFL clamp on a short fibreglass rod Device cable DIX female fast coupling SAB no E no Area mm² Clamps Cable length RGLF on a 0.5 m rod 16.0 m RGLF on a 0.5 m rod 16.0 m RGLF on a 0.5 m rod 16.0 m Earth lead with MT8401 For connecting to: Round conductor, max 329 mm², girder or ball. The kit contains: MT8401 earthing clamp Device cable DIX female fast coupling SAB no E no Area mm² Clamps Cable length E MT m E MT m E MT m Earth lead on spool Silicone-insulated Cu conductor on a spool. The spool forms part of the conductor and has an integrated earth screw. You attach the reel to an earth lead and let it roll out before climbing the pole. After use, the lead is wound back up into a convenient package. SAB no Area, mm² Cable length 60MT m 60MT m 12 SAB ELTEKNIK AB PHONE INFO@SABP.SE
13 Line earthing Line earthing 6613 In compliance with IEC Automatic clamps, MT613, attached to a mount. The clamps are spring-loaded and trigger when the clamp reaches the conductor. The clamp can be easily detached by pulling it away from the cable. Contents: MT automatic clamps, MT613 3 device cables 35 mm², length 2.75 m 1 clamp dispenser head 1 spool with 16 mm² earthing cable, 16 m 1 carrying bag MT automatic clamps, MT613 3 device cables 95 mm², length 2.75 m 1 earthing cable 35 mm², length 16 m 1 earthing clamp MT carrying bag Operating rod can be ordered separately. Model Rated current Weight, kg 60MT ka/s 60MT ka/s Technical specifications Model Rated current Device cable Earthing cable Fits conductor Operating rod 60MT6613 8kA/s 35 mm 2 16 mm 2 Ø 5-30 mm CE421C 60MT kA/s 95 mm 2 35 mm 2 Ø 5-30 mm CM4, CM5, CM7 SAB ELTEKNIK AB PHONE INFO@SABP.SE 13
14 Distribution plant earthing Triple-phase earthing device for ball bolt and round conductor In accordance with IEC For connecting to: Ball bolt Round conductor The kit contains: 3 clamps 3 silicone-insulated device cables, 1.5 m in length. 1 earthing cable 35 mm², length 2.5 m 1 earthing clamp 1 storage container Operating rod can be ordered separately. Model Icc (ka/1sec) For ball bolt Clamps Cables Operating rod 60MT Ø 20 mm and diameter 8-18 mm 3 MT1911E 3 95 mm² CF540E 1 MT1911E 1 35 mm² 60MT Ø 25 mm and diameter mm 3 MT1911E 1 MT1911E mm² 1 50 mm² CF540E Triple-phase earthing device for rail and round conductor In accordance with IEC For connecting to: Rail Round conductor The kit contains: 3 clamps 3 silicone-insulated device cables, 1.5 m in length. 1 earthing cable 35 mm², length 2.5 m 1 earthing clamp 1 storage container Model Icc (ka/1sec) Connection Clamps Cables Operating rod MT Ø 5-35 mm mm 5-40 mm 3 MT815C 1 MT mm² 1 35 mm² CE421C MT Ø 5-16 mm 0-16 mm 40x16 mm Ø 5-28 mm 3 MT812C 3 MT813C 3 MT814C 1 MT mm² 1 25 mm² CE421C 14 SAB ELTEKNIK AB PHONE INFO@SABP.SE
15 Clamps Clamps The clamps are made from aluminium, except models MT814, MT1911 and MT1921, which are made from bronze. See below for a description of the various operating rod mounts. Model Connection Measurements Weight, kg MT812C 5-16 mm round 35x79x kg 0-16 mm flat MT813C 40x16 mm flat 35x79x kg MT814C 5-32 mm round 90x75x kg MT815C 5-35 mm round 44x100x kg MT815S 5-35 mm flat MT1911E For ball bolt, diameter kg mm and round conductor, 8-18 mm MT1921E For ball bolt, diameter kg mm and round conductor, mm mm round GLF for JGS 0.30 kg (Stålskogs operating socket) mm round GLF for KP rod 0.30 kg mm round and 20 and 25 mm ball mm round and 20 and 25 mm ball UKP for JGS (Stålskogs operating socket) UKP for KP rod MT mm round MT734 for JGS (Stålskogs operating socket) We offer a number of adapters for attaching different clamps to different rods 0.30 kg 0.30 kg 0.80 kg Rod mount C K E S A or B Hexagonal Universal Bayonet Clamp-stick Major Series CM4,7 SAB ELTEKNIK AB PHONE INFO@SABP.SE 15
16 Earth connector, ball bolts, lines Earthing clamps Manufactured from copper/bronze, for connecting to ball and round conductor. Model Earthing cable Mount Weight, kg MT8401 Max 35 mm² Ø 6-25 mm 0-25 mm 0.48 kg MT841 Max 50 mm² Ø 6-25 mm 0-30 mm 0.48 kg Earthing clamps Manufactured from copper/bronze, for connecting to ball and round conductor. Model Mount Weight, kg MT1911 For connecting to ball, diameter 20 mm and 0.58 kg round conductor, 8-18 mm MT1921 For connecting to ball, diameter 25 mm and round conductor, mm 0.69 kg Ball bolt In compliance with IEC Model Ball diameter Mount Weight, kg MT2951 Ø 20 mm Internal thread M kg MT29511 Ø 20 mm Bolt M12 L=35 mm 0.18 kg MT29512 Ø 20 mm Bolt M12 L=45 mm 0.20 kg MT3951 Ø 25 mm Internal thread M kg MT3952 Ø 25 mm Internal thread M kg MT39511 Ø 25 mm Bolt M12 L=45 mm 0.30 kg MT39521 Ø 25 mm Bolt M16 L=45 mm 0.35 kg Cu cable Soft Cu line with transparent silicone jacket. Approved in accordance with standard EN Model Area Rated current Weight, kg/m Device cables 25mm² 5 ka/s Device cables 35mm² 7 ka/s Device cables 50mm² 10 ka/s Device cables 70mm² 14 ka/s Device cables 95mm² 19 ka/s Device cables 120mm² 24 ka/s Device cables 150mm² 30 ka/s SAB ELTEKNIK AB PHONE INFO@SABP.SE
17 SAB ELTEKNIK AB PHONE
18 SAB Elteknik offers a complete range of products for electricians. Whether you work with fibreoptics or power cables we provide materials. tools, instruments, machines, implements and safety equipment that help you in your work. Would you like advice or cannot find what you are looking for? Contact us, our job is to guide you to the right equipment. SAB Elteknik AB, Överlida Mjöbäcksvägen Överlida, Sweden Phone Fax SAB Elteknik AB, Ljusdal Plåtslagargatan Ljusdal, Sweden Phone Fax info@sabp.se
Live Line tools and Arc-Flash protection
Live Line tools and Arc-Flash protection 2018 PRODUCT CATALOGUE We provide everything in tools and safety equipment, from LLE tools to Arc Flash protection. SAB ELTEKNIK AB, MJÖBÄCKSVÄGEN 2, 512 60 ÖVERLIDA,
More informationHand tools. Tools for construction and maintenance in electricity, industry and telecommunications. PRODUCT CATALOGUE
Hand tools Tools for construction and maintenance in electricity, industry and telecommunications. 2016 PRODUCT CATALOGUE SAB ELTEKNIK AB PHONE +46 651-760 790 INFO@SABP.SE WWW.SABP.SE 1 Contents Screwdrivers
More informationABC Earthing Kits. ABC Earthing Kit. ABC/Bare Wire LV Earthing System H01
SECTION H EARTHING ABC Earthing Kits H01 ABC Earthing Kit 4 legged ABC earth kit. Each leg of the earth truss terminates with a female bayonet type pipe connector with a protective rubber hand guard. These
More informationEDITION 2011/2012 SAFETY EQUIPMENT
EDITION 2011/2012 SAFETY EQUIPMENT Product catalogue The Standard in Matters of Safety. PFISTERER. When work is to be carried out on electrical installations, the safety of personnel, materials and system
More informationYour major supplier for
Your major supplier for all your electrical safety equipment needs CATU was created in 1919 and, since the beginning, it has dedicated its activity to the manufacture of material and equipment for electricity
More informationSAFETY EQUIPMENT VOLTAGE DETECTORS. PHE Voltage Detector Nominal voltages up to 30 kv / 50 Hz
III Nominal voltages up to 30 kv / 50 Hz EN/IEC 61243-1 (DIN VDE 0682 411) Also for use in wet weather for indoor and outdoor installations With self-testing device Visual indicator Wide nominal voltage
More informationJetting. Machines for blowing and floating telecommunication cables in pre-installed ducts. PRODUCT CATALOGUE
Jetting Machines for blowing and floating telecommunication cables in pre-installed ducts. 2016 PRODUCT CATALOGUE SAB ELTEKNIK AB PHONE +46 651-760 790 INFO@SABP.SE WWW.SABP.SE 1 Contents Ultimaz Ultimaz
More informationHigh Voltage Operating Rods
High Voltage Operating Rods Summary: This work instruction supports the Power System Safety Rules and its requirements assembled under Making High Voltage Apparatus Safe for Work Category 5.5; and Making
More informationJetting. Machines for blowing and floating telecommunication cables in pre-installed ducts. PRODUCT CATALOGUE
Jetting Machines for blowing and floating telecommunication cables in pre-installed ducts. 2018 PRODUCT CATALOGUE SAB ELTEKNIK AB PHONE +46 651-760 790 INFO@SABP.SE WWW.SABP.SE 1 Contents UltimaZ, MiniJet,
More informationProduct selection guide Kabeldon cable cabinet, kv. Document name
Product selection guide Kabeldon cable cabinet, 12 36 kv Document name Kabeldon HDC-A cable cabinet, 12 36 kv A robust and safe solution Application area Kabeldon HDC-A offers unique capabilities for jointing
More informationHand tools. Tools for construction and maintenance in electricity, industry and telecommunications. PRODUCT CATALOGUE
Hand tools Tools for construction and maintenance in electricity, industry and telecommunications. 2017 PRODUCT CATALOGUE SAB ELTEKNIK AB PHONE +46 651-760 790 INFO@SABP.SE WWW.SABP.SE 1 Contents Screwdrivers
More informationNEW IEC Earthing Equipment
NEW IEC Earthing Equipment TEMPORARY PROTECTIVE equipment IEC Earthing Assemblies for medium voltage overhead lines IEC Earthing Equipment 200 Series Kits IEC STANDARD COMPLIANT Earthing Assemblies for
More informationALFA ROMEO. Artwork Mark Version AW Printed Version CMYK CMYK ACCESSORIES
CMYK ALFA ROMEO AC 08 05 15 Artwork Mark Version AW Printed Version CMYK AC O R I G I N A L ACCESSORIES GIULIA BECOMES YOURS. Your new Giulia represents a point of arrival, something you ve always wanted.
More informationSERVICE MANUAL ULTIMATE 200
SERVICE MANUAL ULTIMATE 200 This manual is for: 20 200-120 Ultimate 200 std. 120V 60 Hz 20 200-240 Ultimate 200 std. 240V 50 Hz 20 201-120 Ultimate 200 DMX 120V 60 Hz 20 201-240 Ultimate 200 DMX 240V 50
More informationPLASMA. Product Catalogue 1.0/V1.
T E C H N O L O G Y F O R T H E W E L D E R S W O R L D. PLASMA Product Catalogue 1.0/V1 www.binzel-abicor.com Content PLASMA-Cutting Torches Plasma-Cutting Torches ABIPLAS CUT air-cooled Page 04 05 ABIPLAS
More informationCordless Rechargeable Saw Instructions for Use
Technical data Voltage: DC 10.8V Weight: 1.25Kg Stroke rate: 0-2100/min Stroke: 15mm Cutting capacity: max diameter in wood 80mm / in soft metal 7mm Charging time: Between 5.0-5.5 Hours Battery: 1.3Ah
More informationItem Code Description Unit Qty Total
UNDP ELECTRICITY SECTOR NORTHERN GOVERNORATES Phase XI Item Code Description Unit Qty Total 04-02-00001 Service Pole - 6m, 75mm dia GS Pipe 11250 04-02-00002 9m Tubular Steel Poles complete with all Accessories
More informationGDS. Pole Mounted Disconnectors Up to 52kV
GDS Pole Mounted Disconnectors Up to 52kV General Information The switch for every application The GDS range is a modern switch system with components for different isolation and switching applications
More informationCFT24 &CFT230 PART NOS:
FUEL TRANSFER PUMP Model Nos. CFT12, CFT24 &CFT230 PART NOS: 7160010, 7160020 & 7160030 INSTALLATION & OPERATING INSTRUCTIONS ORIGINAL INSTRUCTIONS GC05/18 REV 5 INTRODUCTION Thank you for purchasing this
More information1ZSE EN, REV. 4. Wall bushings type GSA-AA Technical guide
1ZSE 2750-112 EN, REV. 4 Wall bushings type GSA-AA Technical guide Original instruction The information provided in this document is intended to be general and does not cover all possible applications.
More informationOutdoor disconnectors FTr (previously 6400 and 6410) single- and three-pole design rated voltage 25 and 38.5 kv rated current 400 and 630 A
Outdoor disconnectors FTr (previously 6 and 6410) single- and three-pole design rated voltage 25 and 38.5 kv rated current and 6 A 1 Outdoor disconnectors Outdoor disconnectors, produced in accordance
More informationAusrüstung für Arbeiten unter Spannung an Freileitungen bis 36 kv Equipment for Live Working at overhead lines up to 36 kv
Ausrüstung für Arbeiten unter Spannung an Freileitungen bis 36 kv Equipment for Live Working at overhead lines up to 36 kv Arbeiten mit Isolierhandschuhen Insulating glove working Arbeiten auf Abstand
More informationUSER S MANUAL TUBE SEALER. Model SE250. No. CAT.SE25010Ce
USER S MANUAL TUBE SEALER Model SE250 No. CAT.SE25010Ce Centron Technologies Corporation 319-25 Sadang-4-dong, Dongjak-ku Seoul, Korea 156-823 Tel. +82-2.522.7807 Fax +82-2.522.7806 Important Note 1. Safety
More informationLIQUID SYSTEM PARTS LIST
STRIKER 550 850 00 LIQUID SYSTEM PARTS LIST LIQUID SYSTEM COMPONENTS... - SPRAYBAR ATTACHMENT... BAR ASSEMBLY... SIDE SPRAY ASSEMBLY...5 -WAY SPRAY ASSEMBLY...5 LIQUID BLADDER TANK... LEVEL INDICATOR ASSEMBLY...7
More informationINSTRUCTION MANUAL ANGLE GRINDER PT W
INSTRUCTION MANUAL ANGLE GRINDER PT50360 4½ INCHES 120V 60Hz 600W 5A 12,000 rpm C US Note : Before operating this tool, read this manual and follow all safety rules and operating instructions. This electric
More informationEquipment and Machines
Equipment and Machines 2017 PRODUCT CATALOGUE The tools, machines and knowledge needed for cable and overhead lines SAB ELTEKNIK AB PHONE +46 651-760 790 INFO@SABP.SE WWW.SABP.SE 1 Contents Cable-laying
More informationSAFETY EQUIPMENT FOR RAILWAYS
SAFETY EQUIPMENT FOR RAILWAYS Safety Equipment for Railways Our product range of safety equipment for railways is listed separately in Publication No. DS 501/E. The devices shown are compatible to systems
More informationPOLYMED CATALOGUE 2013 POLYCARBONATE STOPCOCKS MANIFOLDS - CONNECTORS
CATALOGUE 2013 POLYCARBONATE STOPCOCKS MANIFOLDS - CONNECTORS General Information COMPLIANCE PRODUCT The Luer taper fittings are conform to standard ISO 594-1 for syringes, needles and other medical devices.
More informationIEC Earthing Equipment
IEC Earthing Equipment Temporary Protective Equipment for Medium Voltage Overhead Lines Honeywell Salisbury offers utility workers lightweight and reliable equipment for medium voltage overhead lines.
More informationThe Powermatic User Guide Test Sieve Shaker
The Powermatic User Guide Test Sieve Shaker ISSUE 04-02 Contents Description Page 1 Setting Up: 2-8 Unpacking 2 Assembly 3-4 Levelling 4 Electrical Connections 5 Sieve Stacking 6-8 Operating Instructions
More informationHDS 5/15 UX. Integrated hose reel. Water fine filter. Innovative upright design. Compact design
HDS 5/15 UX Competitively priced entry class model of a hot water high-pressure cleaner. Innovative "Upright"-Design ensures good mobility and ergonomics. Very user-friendly due to one-button-operation
More informationLB - LIGHTING BUSWAY 25-40A
16 LB - LIGHTING BUSWAY 25-40A LIGHTING BUSWAY SECTION CONTENTS 18 General features 24 Trunking components: 2 and 4 conductors elements 28 Trunking components: 6 conductors elements 30 Plugs 33 Fixing
More informationMASTERBOX Series MASTERBOX SERIES DISTRIBUTION ASSEMBLIES
MASTERBOX Series MASTERBOX SERIES DISTRIBUTION ASSEMBLIES VERSIONS They come in two sizes (WxHxD): MASTERBOX 70 x 580 x 50mm MASTERBOX 5 70 x 580 x 50mm Installation: - surface mounting - elevated with
More informationElectric Vehicle Charging Station
EVoReel Electric Vehicle Charging Station INSTALLATION GUIDE AND USER MANUAL Model: Dual Output Pedestal Mount 30A EVoReel EVSE Model Numbers: With Basic EVSE: EV072-400-002A; With Intelligent ievse: EV072-410-002A;
More informationTECHNOLOGY FOR THE WELDER S WORLD. PLASMA. Product Catalogue 2.2 / V1.
TECHNOLOGY FOR THE WELDER S WORLD. PLASMA Product Catalogue 2.2 / V1 www.binzel-abicor.com Content Plasma Cutting Torches Plasma Cutting Torches ABIPLAS CUT air cooled Page 04 05 ABIPLAS CUT 70 / ABIPLAS
More informationThe EFL 2000/1 & 2 User Guide Test Sieve Shaker. Contents
The EFL 2000/1 & 2 User Guide Test Sieve Shaker ISSUE 04-02 Contents Description Page 1 Setting Up: 2-8 Unpacking 2 Assembly 3 Clamping Assembly 4 Electrical Connections 5 Sieve Stacking 6 8 Operating
More informationvertical fuse switch disconnectors
SWITCHGEAR ARS vertical fuse switch disconnectors - touch protection IP 30 from the front - fibre glass extra strenghtened, self extinguishing thermoplastics - double clearance between open contacts -
More informationIndoor disconnectors ITr. single- and three-pole design rated voltage 12, 25 and 38.5 kv rated current A
Indoor disconnectors ITr single- and three-pole design rated voltage 12, 25 and 38.5 kv rated current 630 6300 A Indoor disconnectors Disconnectors as shown in the data sheet are intended to be used for
More informationELEKTROTECHNISCHE WERKE FRITZ DRIESCHER & SÖHNE GMBH
773 DRIESCHER Medium voltageswitchgear and substation accessories 773 773 ELEKTROTECHNISCHE WERKE FRITZ DRIESCHER & SÖHNE GMBH D853 MOOSBURG TEL. +49 87 80 FAX +49 87 8 2 30 http://www.driescher.com infoservice@driescher.de
More informationNATIONAL POWER INDUSTRIES
NSIC - CRISIL RATTING : SE 3 B NSIC - ICRA RATTING : SE 3 B C E MARKED PRODUCT Regd. Office : Administration Office Factory (1) Factory (2) Tele/Fax Mobile E-mail Website (Vyas Group Of Companies) Load
More informationWORKSHOP ESSENTIALS & TOOLS FOR HYBRID & ELECTRIC VEHICLES. Workshop Safety Vehicle Safety Personal Safety High Voltage Tools & Testers
WORKSHOP ESSENTIALS & TOOLS FOR HYBRID & ELECTRIC VEHICLES Workshop Safety Vehicle Safety Personal Safety High Voltage Tools & Testers Workshop Safety 6700 Set of 4 Posts, Bases and 25 Metre Chain Plastic
More informationHIGH VOLTAGE PROXIMITY DETECTOR
HIGH VOLTAGE PROXIMITY DETECTOR An ISO 9001:2008 Company Model 275 HP (Upto 275KV) / 500 HP (Upto 500KV) The 275HP / 500HP is a HIGH VOLTAGE proximity detector. 275HP has eight voltage detection settings
More informationSafety switches with separate actuator
Safety switches with separate actuator Selection diagram VF KEYD VF KEYD1 VF KEYD VF KEYD VF KEYD5 VF KEYD6 VF KEYD7 VF KEYD8 VF KEYD10 VF KEYD11 ACTUATORS CONTACT BLOCKS FR FX FK FW 5 6 7 11 1 14 NC NC
More informationSEPARATE THE WORK AREA FROM ALL POSSIBLE SOURCES OF POWER-SUPPLY. by opening circuit-breakers, switches and lock the links in the open position
1 First, select the right equipment Golden Rules 2 SEPARATE THE WORK AREA FROM ALL POSSIBLE SOURCES OF POWER-SUPPLY by opening circuit-breakers, switches and lock the links in the open position 3 CHECK
More information10.5 gal. Vertical Oil Lubricated Air Compressor
10.5 gal. Vertical Oil Lubricated Air Compressor Model No. AC1104 Tank volume: 10.5 gal. (40 L) Direct drive Oil-lubricated single cylinder pump for durability and long life triple the pump life of comparable
More informationLED Exam Light. Service and Parts Manual. Model Numbers: FOR USE BY MIDMARK TRAINED TECHNICIANS ONLY Rev. (1/23/18)
LED Exam Light Model Numbers: 253 Service and Parts Manual FOR USE BY MIDMARK TRAINED TECHNICIANS ONLY 004-0779-00 Rev. (1/23/18) Table of Contents Section C Section B Section A General Info GENERAL INFORMATIOn
More informationFKR 104. Mounting Instructions. Cartridge kit for BMW S1000RR, BMW HP4
Kit Contents Description Part No Pcs Cartridge kit FKR 10 1 O-ring (.0x3.53) 0038-26 2 O-ring (23.52x1.78) 0038-02 2 Plug 21652-06 2 Main spring 9.5 N/mm 07-95 2 Main spring 10.0 N/mm 07-10 2 Main spring
More informationHydraulic cut-off saws, core drills and submersible pumps. Powerful, lightweight and portable
Hydraulic cut-off saws, core drills and submersible pumps Powerful, lightweight and portable The best power-to-weight Construction and rental companies around the world are discovering the advantages of
More informationPowerIT Indoor Voltage Transformer Fuses, WBP. Outdoor Voltage Transformer Fuses, BRT. Catalogue 1YMB en. Industrial IT.
PowerIT PowerIT Indoor Voltage Transformer Fuses, WBP Outdoor Voltage Transformer Fuses, BRT Catalogue 1YMB612070-en Industrial IT enabled TM 1. FEATURES Unlimited breaking capacity Short circuit current
More information8WH2 Spring-Loaded Terminals
8WH2 Spring-Loaded Terminals /2 Introduction /3 General data on 8WH /7 8WH through-type terminals 1) /18 8WH hybrid through-type terminals 1) /21 8WH fuse terminals /23 8WH isolating blade terminals /25
More informationFerax newsletter
Ferax newsletter 2010-07 1 COMPRESSED AIR Quick couplings Quick couplings with hose connection Quick couplings with male thread Quick couplings with female thread Insert nipple with hose connection Insert
More informationPLASMA. Product Catalogue 2.0/V1.
T E C H N O L O G Y F O R T H E W E L D E R S W O R L D. PLASMA Product Catalogue 2.0/V1 www.binzel-abicor.com Content Plasma Cutting Torches Plasma Cutting Torches ABIPLAS CUT air cooled Page 04 05 ABIPLAS
More informationBattery Chargers Sealed or Valve Regulated Lead Acid Batteries Model: PSC AP
Battery Chargers Sealed or Valve Regulated Lead Acid Batteries Model: PSC-124000AP OPERATING PROCEDURES AND SAFETY INSTRUCTIONS CAUTION: TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER NO USER
More informationBattery Chargers Sealed or Valve Regulated Lead Acid Batteries Model: PSC A
Battery Chargers Sealed or Valve Regulated Lead Acid Batteries Model: PSC-124000A OPERATING PROCEDURES AND SAFETY INSTRUCTIONS CAUTION: TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER NO USER
More informationOperating Manual Cellspin
Operating Manual Cellspin Clinical Centrifuge Date of Purchase Serial No. Place of purchase Copyright 2017 Hanil Scientific Inc. All rights reserved. Contact Us If you have and questions, contact Hanil
More informationDistribution boards. 68 Q-DIN Range
Complete electric boards system for energy distribution in commercial, industrial and costrucion sites places. Available in both empty and wired version, in compliance with the IEC 61439 Standard: Versions
More information1 Product Description System Layout Safety Instructions Intended Use Installation... 3
Order Number 0812xx- Contents 1 Product Description... 2 2 System Layout... 2 3 Safety Instructions... 3 4 Intended Use... 3 5 Installation... 3 5.1 Hanger Clamp... 3 5.2 Cutting of Conductor Rail... 4
More informationELECTRIC HOIST MODEL NO: CH2500B, CH4000B OPERATION & MAINTENANCE INSTRUCTIONS PART NO: ,
ELECTRIC HOIST MODEL NO: CH2500B, CH4000B PART NO: 7630386, 7630391 OPERATION & MAINTENANCE INSTRUCTIONS ORIGINAL INSTRUCTIONS LS0517 - Iss 5 INTRODUCTION Thank you for selecting this Clarke Electric Hoist.
More informationMINI-EDGER POLISHER/SCRUBBER
MINI-EDGER POLISHER/SCRUBBER INTRODUCTION OPERATING & MAINTENANCE INSTRUCTIONS READ THIS BOOK This operator s book has important information for the use and safe operation of this machine. Read this book
More informationLED NEUTRON 4 x QUAD COLOUR LED LIGHT EFFECT
TECHNICAL SPECIFICATION: Voltage : 230Vac, 50Hz Power Consumption: 60W LED Type : 4 x 4-in-1 Quad LED Fuse: F3A RGBW LED Power: 4 x 10W Quad LED LED Lifespan: 10,000hrs DMX Channels: 6 or 21 Dimensions
More informationTools and Equipment For Live Line Working
Tools and Equipment For Live Line Working Table of Contents Product Slot Together Switching Rods 5 Switching Rod Bags 5 Telescopic Rods For Transmission 5 Take-Apart Hot Sticks Telescopic 6 Telescopic
More informationMODEL Nos: CVAC20SS CVAC25SS CVAC30SSR OPERATING & MAINTENANCE INSTRUCTIONS. Distributed by CLARKE International Ltd.
MODEL Nos: CVAC20SS CVAC25SS CVAC30SSR OPERATING & MAINTENANCE INSTRUCTIONS Distributed by CLARKE International Ltd. 1006 Thank you for selecting this VAC KING Stainless Steel Vacuum Cleaner, which will
More informationELECTRIC HOIST MODEL NO: CH2500B, CH4000B OPERATION & MAINTENANCE INSTRUCTIONS PART NO: , LS1010
ELECTRIC HOIST MODEL NO: CH2500B, CH4000B PART NO: 7630386, 7630391 OPERATION & MAINTENANCE INSTRUCTIONS LS1010 INTRODUCTION Thank you for purchasing this CLARKE Electric Hoist. Before attempting to use
More informationJANDS DD-8. Technical Manual. Version 1.0
JANDS DD-8 O p t o - I s o l a t e d D M X S p l i t t e r Technical Manual Version 1.0 EMC COMPLIANCE This product is approved for use in Europe and Australia/New Zealand and conforms to the following
More informationASSEMBLY INSTRUCTIONS
6.5' McKinley Pine ASSEMBLY INSTRUCTIONS MODEL NO: U11G681A-024-01 (WL-018) PRODUCT CODE: 140-034066-910 CAUTION: Carefully Read Instructions and Procedures for Safe Operation Receipt of Purchase: Questions,
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-31488-0 SOUTH AFRICAN NATIONAL STANDARD Switchgear Metal-enclosed ring main units for rated a.c. voltages above 1 kv and up to and including 36 kv WARNING This document references other
More informationOvercurrent releases - description, specifications, characteristics specifications specifications description...
BA5*37 COMMERCIAL INFORMATION Type designation specification for ordering...68 (design and circuit breaker and switch-disconnector accessories selection, circuit breaker rated current selection) Connecting
More information8WH2 Spring-Loaded Terminals
8WH2 Spring-Loaded Terminals /2 Introduction /3 General data on 8WH /7 8WH through-type terminals 1) /18 8WH hybrid through-type terminals 1) /21 8WH fuse terminals /23 8WH isolating blade terminals /25
More informationDNX 3 MCB 4500 A / 6 ka Phase + Neutral, neutral on left side
87045 LIMOGES Cedex Telephone number: +33 (0)5 55 06 87 87 Fax: +33 (0)5 55 06 88 88 DNX 3 MCB 4500 A / 6 ka CONTENTS PAGE 1. Description, use... 1 2. Range... 1 3. Overall dimensions... 1 4. Preparation
More informationSpring Special. 1 October - 30 November 2012 GLFS0012 R R GLFS0008. Micro - Tec
Spring Special *All Prices Incl VAT* E&OE 1 October - 30 November 2012 MSS9600 61pc Tool Set R2 502.00 1/2 Socket Sizes (12 Point): 8 10 11 12 13 14 15 16 17 18 19 20 21 22 24 27 30 32 1/2 Reversible Ratchet
More informationFuse switch-disconnectors
Fuse switch-disconnector FH00 is intended fuse-links with blade contacts size 000 and 00. It enables safe disconnection not only of rated current, but also overcurrent up to octuple rated current. A version
More informationPASS M00. Multifunctional modules for high voltage substations kv; A;... 31,5 ka
PASS M00 Multifunctional modules for high voltage substations... 100 kv;... 2000 A;... 31,5 ka Innovation and on-going research The PASS M00 module is the latest arrival in the PASS family. PASS M00 is
More informationWorkshop manual PW 345C, PW 350, PW 360
Workshop manual PW 345C, PW 350, PW 360 English Workshop Manual PW 345C, PW 350, PW 360 Contents 1 Introduction and safety regulations... 3 1.1 General...3 1.2 Revisions...3 1.3 Target group...3 1.4 Safety
More informationHigh Pressure Abrasive Blast Cabinet 42000
Please read and save these instructions. Read through this owner s manual carefully before using product. Protect yourself and others by observing all safety information, warnings, and cautions. Failure
More informationNOW WHAT? HV JUICE. Tappat 3 Way LV Link Pillar. Oct/Nov This Issue. All the solutions for Temporary. Earthing and Equipotential Bonding
HV JUICE Oct/Nov 2017 NOW WHAT? All the solutions for Temporary Earthing and Equipotential Bonding This Issue Tappat 3 Way LV Link Pillar PAGE 6 THE EQUIPOTENTIAL BONDING ZONE PAGE 2 MV EARTH SETS PAGE
More informationTABLE OF CONTENTS FOREWORD...3 INTRODUCTION SCOPE NORMATIVE REFERENCES DEFINITIONS AND ABBREVIATIONS REQUIREMENTS...
TITLE SPECIFICATION FOR PORTABLE DATE: JULY 2006 PAGE: 1 OF 25 TABLE OF CONTENTS Page FOREWORD...3 INTRODUCTION...4 1 SCOPE...4 2 NORMATIVE S...4 3 DEFINITIONS AND ABBIATIONS...4 4 REQUIREMENTS...5 4.1
More informationPerfo. Kits Perfo Accessories (without perforated panels) Kits Perfo Accessories (with perforated panels)
482 Technical Information.......................... 484 48 Panels............................... 486 487 for rated Panels........... 488 0 Kits (without perforated panels). 02 07 Kits (with perforated
More informationDX³ RCCBs - ID 4P up to 100 A
87045 LIMOGES Cedex Telephone number: +33 (0)5 55 06 87 87 Fax: +33 (0)5 55 06 88 88 DX³ s - ID CONTENTS PAGE 1. Description, use... 1 2. Range... 1 3. Overall dimensions... 1 4. Preparation - Connection...
More informationDistribution Blocks & Bus-bar Solutions
Distribution Blocks & Bus-bar Solutions Insulated Multi Laminate Flexible Copper Bus-bars Threaded Copper Bus-bars Solid Copper Bus-bars Bus-bar Insulators & Supports Insulated Flexible Copper Braided
More informationTechnical manual. Bure. Walker and Stand-aid with Power Rise Function Bure Rise & Go
Technical manual Bure Walker and Stand-aid with Power Rise Function Bure Rise & Go 56-316 1 1 2 4 3 6 5 7 8 9 11 10 12 13 14 27 15 26 16 28 21 17 18 19 20 25 29 23 22 24 2 Replacement parts list 1 58-306-L
More informationSolar Module Installation and User Manual
Solar Module Installation and User Manual Thank you for selecting solar panel from Einnova-Solarline, China Jiangsu International Group. In order to use the solar panels properly, please read this Installation
More informationVistop TM isolating switches 63 to 160A
DX 3 - IS main switches 16 to 125A Vistop TM isolating switches 63 to 160A 225 15 225 18 4 064 00 4 064 59 Pack Cat. No. Main switches AC 22 A category as per EN607-3 Grey handle Accept 1 signalling auxiliary
More informationGlass fuse 16x5 mm time lag. Number Amp. Number Amp.
Fuses Glass Accessoiries for fuses Fuses NDZ Fuses Diazed Fuses Neozed Fuses automatic Screw connection Fuses Knife Fuses plug/in standard and Maxi Fuse links melting plate Fuses porcelain Glass fuse 16x5
More informationAuto Care WIPECO INDUSTRIES
Auto Care WIPECO INDUSTRIES Hydro Xtreme Industrial Paper Wipers Hydro Xtreme wipes are produced using a spunlace technology which entangles wood fibers on a substrate by using high velocity water jets.
More informationCable pulling technology
Cable pulling technology Fish tapes/pulling rods 556 Polyester 556 Perlon 556 Nylon 556 Steel 557 Flex-O-Twist speed flex leader 557 Fibreglass cable pulling rods 557 Cable pulling systems 55 With Polyester
More informationCable arrangement 15 Preparation for cable installation. 15 Installation of the cables 16 Finishing of the cable installation. 17 Examples.
Transportation and storage.. 3 General. 3 Unpacking at installation site....... 3 Transfer of cubicles at installation site... 3 Weight.. 4 Temporary storage. 4 Erection at site 5 General. 5 The switchgear
More information023 : 2006 CEB STANDARD. 12kV & 36kV LOAD BREAK SWITCHES CEYLON ELECTRICITY BOARD SRI LANKA
023 : 2006 CEB STANDARD 12kV & 36kV LOAD BREAK SWITCHES CEYLON ELECTRICITY BOARD SRI LANKA Specification for 12kV & 36kV LOAD BREAK SWITCHES CEB Standard 023 : 2006 CEYLON ELECTRICITY BOARD No. 50, Sir
More informationTRIED & TESTED All of our products have been tried and tested used and reviewed by Licensed Australian Electricians.
Electrical Factory Outlet Pty Ltd Accredited Service Providers 2016 Catalogue Electrical Factory Outlet Electrical Factory Outlet is an Australian owned and operated company, specialising in high quality
More informationASSEMBLY INSTRUCTIONS PRODUCT CODE: CAUTION: Carefully Read Instructions and Procedures for Safe Operation. 7' Diamond Peak LED Tree
7' Diamond Peak LED Tree ASSEMBLY INSTRUCTIONS MODEL NO: U11G684A-024-01 (WL-019) PRODUCT CODE: 140-034067-090 CAUTION: Carefully Read Instructions and Procedures for Safe Operation. Receipt of Purchase:
More informationInstructions for Parts Books
Instructions for Parts Books The heading at the top of the page will be the same for the picture of the parts at it is for the page with the part numbers. Definition of column headings on part number pages:
More informationEZTray. Cable Management Made Easy
EZTray Cable Management Made Easy PRESENTATION Introduction:.................................. 3 EZ Tray: The Tray That Saves You Time!.............. 4-5 EZ Tray: The Innovative Cable Management Solution....
More informationINSTRUCTION MANUAL PORTABLE APPLIANCE TESTER
INSTRUCTION MANUAL PORTABLE APPLIANCE TESTER KEW6201A CONTENTS 1. Safe testing 1 2. Procedure of removing cover. 3 2.1 Method of removing the cover. 3 2.2 Method of storing the cover. 3 3. Product summary
More informationCATALOGUE OF PRODUCTS
CATALOGUE OF PRODUCTS EL-INŠ s.r.o. Priemyselná 91701 Trnava Slovakia www.el-ins.sk info@el-ins.sk +41 948 38 978 SUMMARY Glow tube testers HV... - 3 HV, EHV testers with combined signalling... 4-6 HV,
More informationPARTS LIST CHAIN SAW. G2500 G2500-OPS (for KOREA)
848C1493B1-OPS-K (909) PARTS LIST CHAIN SAW G2500 G2500-OPS (for KOREA) : 1. Use ZENOAH genuine parts specified in the parts list for repair and/or replacement. 2. ZENOAH does not warrant the machines,
More informationFKR 105. Mounting Instructions. Cartridge kit for Kawasaki ZX-10R
Kit Contents Description Part No Pcs Cartridge kit FKR 105 1 O-ring x 008-50 O-ring 0x.5 00576-0 Main spring 9.5 N/mm 07-95 Main spring 10.0 N/mm 07-10 Main spring 10.5 N/mm 07-05 Sticker 00191- Sticker
More informationATTACH YOUR RECEIPT HERE ITEM # FT. PRE-LIT DOUGLAS FIR TREE. MODEL #DF-75C85 Español p. 8
ITEM #0776 7. FT. PRE-LIT DOUGLAS FIR TREE MODEL #DF-7C8 Español p. 8 ATTACH YOUR RECEIPT HERE Serial Number Purchase Date Questions, problems, missing parts? Before returning to your retailer, call our
More informationCaddy. Tig 2200i AC/DC. Instruction manual GB Valid for: serial no. 711-, 747-xxx-xxxx
Caddy Tig 2200i AC/DC Instruction manual 0460 225 301 GB 20180920 Valid for: serial no. 711-, 747-xxx-xxxx TABLE OF CONTENTS 1 SAFETY... 4 1.1 Meaning of symbols... 4 1.2 Safety precautions... 4 2 INTRODUCTION...
More informationFirst and largest european specialist in Electrical safety equipment
First and largest european specialist in Electrical safety equipment CATU was created in 1919 and, since the beginning, it has dedicated its activity to the manufacture of material and equipment for electricity
More informationCircuit-Breakers M4 166 for motor protection. Auxiliary contacts 167 Signalling switch Auxiliary releases
Index Page Circuit-Breakers M4 166 for motor protection Auxiliary contacts 167 Signalling switch Auxiliary releases Insulated 3-pole busbar system 168 Terminal block DIN-rail adapters 169 Busbar adapters
More informationDisconnectors and earthing switches up to 25 kv AC
Disconnectors and earthing switches up to 25 kv AC Sicat 8WL6144 for overhead contact line systems in main-line railways siemens.com/rail-electrification The disconnectors and earthing switches of the
More information