CFT24 &CFT230 PART NOS:

Size: px
Start display at page:

Download "CFT24 &CFT230 PART NOS:"

Transcription

1 FUEL TRANSFER PUMP Model Nos. CFT12, CFT24 &CFT230 PART NOS: , & INSTALLATION & OPERATING INSTRUCTIONS ORIGINAL INSTRUCTIONS GC05/18 REV 5

2 INTRODUCTION Thank you for purchasing this CLARKE Pump. The CFT pump is designed only for use with diesel fuels. It must not be used with water, petroleum fuels, alcohol or lubricating oils, nor if small solids are known to be in suspension in the fuel. Before attempting to use this product, please read this manual thoroughly and follow the instructions carefully. In doing so you will ensure the safety of yourself and that of others around you, and you can look forward to your purchase giving you long and satisfactory service. GUARANTEE This product is guaranteed against faulty manufacture for a period of 12 months from the date of purchase. Please keep your receipt which will be required as proof of purchase. This guarantee is invalid if the product is found to have been abused or tampered with in any way, or not used for its intended the purpose. Faulty goods should be returned to their place of purchase, no product can be returned to us without prior permission. This guarantee does not effect your statutory rights. SPECIFICATION CFT12 CFT24 CFT230 Motor 12V DC 24V DC 230V AC 1ph Power Rating 0.25HP 0.25HP 0.3HP Motor Speed 3000rpm 3000rpm 2800rpm Current Rating 14A 7A 1.5A Max Flow 40 l/min 40 l/min 50 l/min Hose Size 1" ID 1" ID 1" I/D Please note that the details and specifications contained herein, are correct at the time of going to print. However, CLARKE International reserve the right to change specifications at any time without prior notice. 2

3 GENERAL SAFETY RULES WORK AREA 1. Keep the work area clean and well lit. Cluttered and dark areas invite accidents. 2. Do not operate power products in explosive atmospheres such as in the presence of flammable liquids, gasses or dust. Power products create sparks which may ignite dust or fumes. ELECTRICAL SAFETY 1. Power products must always match the power outlet. Never modify the plug in any way. Do not use adaptor plugs with earthed (grounded) power tools. Correct plugs and outlets will reduce the risk of electric shock. 2. Do not expose to rain or wet conditions. Any water entering pump will increase the risk of electric shock. 3. Do not abuse the electrical cable. Never use the cable for pulling or unplugging the pupm. Keep the cable away from sources of heat, oil, sharp edges or moving parts. Damaged or tangled cables increase the risk of electric shock. 4. Use outdoor extension leads. If working outdoors, always use an approved cable extension suitable for the power rating of this tool (see specifications), the conductor size should also be at least the same size as that on the machine, or larger. When using a cable reel, always unwind the cable completely. We strongly recommend that the CFT230 pump is connected to the mains supply via a Residual Current Device (RCD). PUMP SAFETY 1. DO NOT use this pump where there is a danger of fire. 2. Always disconnect the pump from the power supply before carrying out any adjustments or servicing. 3. DO NOT use to pump any liquid other than DIESEL fuel. 4. ALWAYS ensure the ON/OFF switch, mounted on the rear of the capacitor housing (see parts lists and diagrams on page 9 & 10), is in the OFF (O) position, before connecting to the power supply - Battery or Mains. This is to avoid the possibility of arcing taking place, thereby reducing the risk of fire. 5. Switch the pump OFF immediately after the task is completed. 6. Do not use the pump if the switch does not turn it on and off. Any power product that cannot be controlled with the switch is dangerous and must be repaired. 3

4 SERVICE 1. When necessary, have your pump serviced or repaired by a qualified person using identical replacement parts. This will ensure that the safety of the product is maintained. ENVIRONMENTAL PROTECTION Take care to ensure that if diesel fuel is spilt on the roadway or any place likely to cause a hazard to passing vehicles, that it is cleaned away using sand or treated with absorbant granules designed for the purpose. Always make every effort to contain any spillage and prevent ingress into the local water course. ENVIRONMENTAL RECYCLING POLICY Through purchase of this product, the customer is taking on the obligation to deal with the WEEE in accordance with the WEEE regulations in relation to the treatment, recycling & recovery and environmentally sound disposal of the WEEE. In effect, this means that this product must not be disposed of with general household waste. It must be disposed of according to the laws governing Waste Electrical and Electronic Equipment (WEEE) at a recognised disposal facility. Please keep these instructions in a safe place for future reference. ELECTRICAL CONNECTIONS CFT12 & CFT24 MODELS These models are battery operated, and provided with crocodile type clamps for attaching to the battery terminals. The CF12 is the 12 volt model requiring a 12 V battery, and CFT24 is the 24 volt model, requiring two 12 volt batteries connected in series. The RED clamp is connected to the POSITIVE terminal,the BLACK clamp to the NEGATIVE terminal. 4

5 CFT230 MODELS WARNING! Read these electrical safety instructions thoroughly before connecting the product to the mains supply. Before switching the machine on, make sure that the voltage of your electricity supply is the same as that indicated on the rating plate. This product is designed to operate using 230 VAC mains power. Connecting it to any other power source may cause damage. This product may be fitted with a non-rewireable plug. If it is necessary to change the fuse in the plug, the fuse cover must be refitted. If the fuse cover becomes lost or damaged, the plug must not be used until a suitable replacement is obtained. If the plug has to be changed because it is not suitable for your socket, or due to damage, it should be cut off and a replacement fitted, following the wiring instructions shown below. The old plug must be disposed of safely, as insertion into a mains socket could cause an electrical hazard. WARNING! The wires in the power cable of this product are coloured in accordance with the following code: Blue = Neutral Brown = Live Yellow and Green = Earth If the colours of the wires in the power cable of this product do not correspond with the terminal markings of your plug, proceed as follows. The wire which is coloured Blue must be connected to the terminal which is marked N or coloured Black. The wire which is coloured Brown must be connected to the terminal which is marked L or coloured Red. The wire which is coloured Yellow and Green must be connected to the terminal which is marked E or or coloured Green. Plug must be BS1363/A approved Earth Always fit a 13 Amp fuse. (Green and Yellow) Neutral Live (Blue) (Brown) Ensure that the outer sheath of the cable is firmly held by the clamp We strongly recommend that this machine is connected to the mains supply via a Residual Current Device (RCD). If in doubt, consult a qualified electrician. DO NOT attempt repairs yourself. 5

6 INSTALLATION Firmly screw the inlet adapter provided into the inlet port, ensuring it is adequately sealed. Attach an inlet hose (not supplied) using a worm drive clip, or similar, ensuring the joint is airtight. The Inlet port has an arrow embossed on the housing showing the direction of flow. NOTE: 1. It is important that the inlet hose is completely free of holes or other imperfections, otherwise the pump will not operate satisfactorily or may not operate at all. 2. The length of hose must not be greater than 7metres which is the maximum suction height for the pump. Before screwing on the outlet hose for the first time, it is necessary to prime the inlet side of the pump, by pouring diesel fuel into the outlet port until all air has been expelled. It will not be necessary to carry out this procedure again, unless the inlet hose has been drained. Screw the outlet hose to the outlet adapter and the other end to the nozzle assembly. OPERATION WARNING: Ensure the ON/OFF switch, located at the rear of the pump, is set to the OFF (O) position BEFORE connecting the pump to the electrical supply. This is to avoid the possibility of arcing taking place and thereby reducing the risk of fire. CFT 230 Connect the mains lead to the electrical supply, bearing in mind the warning above, and set the switch at the rear of the pump, to the ON (I) position. The pump will operate and pumping will begin. 6

7 CFT12 & CFT24 Ensure the battery is the right type for the pump; ie. 12V for the CFT12 and 24V for the CFT24. Ensure also that the battery terminals are clean, and, bearing in mind the warning above, firmly attach the RED clamp to the POSITIVE and the BLACK clamp to the NEGATIVE terminals respectively. Double check to ensure the clamps cannot be disturbed easily, and that the setup is protected from passers by. Set the switch, at the rear of the terminal box, to ON (I). With the motor running, pull the nozzle trigger and proceed to pump your diesel fuel. A trigger lock is provided, simply pull the trigger fully, push IN the lock then relaease the trigger. Do not allow the pump to operate for more than 30 seconds or so, when pumping has ceased. THERMAL OVERLOAD PROTECTION The motors of these pumps are provided with thermal overload protection. In the event that the pump cuts out due to overheating, always investigate the cause - this could be a blocked hose or damage to the pump motor. The 230V model will restart automatically once it has cooled down sufficiently. Nevertheless, you should ALWAYS switch the pump OFF and allow it to cool down. The battery operated pumps are provided with a reset button, mounted on the front of the terminal box. Leave the pump to cool down for at least 10 minutes before pressing, to restart the pump. If the condition persists, further investigation is required to determine the cause. MAINTENANCE The pumps are of robust design and require little or no maintenance, except for ensuring that the electric power cables and clamps are always in good condition. Avoid using solvents if cleaning plastic parts as most plastics are susceptible to damage from various types of commercial solvents. Ensure also that the hoses used are perfectly sound. Store the pump in dry conditions protected from the weather. For any problems requiring the dismantling and overhaul of the saw, contact your CLARKE International Service Department on Spare parts are available as shown in the diagrams on the following pages. 7

8 WIRING DIAGRAMS 8

9 COMPONENT PARTS CFT12 & CFT24 Item Description Qty Part No. 1 Pump Body 1 GM By-pass 1 GM Retaining Ring 1 GM Diode 1 GM Switch 1 GM Outlet Adaptor 1 GM Switch Box 1 GM Cover 1 GM O-Ring 1 GM Blade 5 GMF Key 1 GMF Rotor Blade Holder 1 GMF Volt Motor 1 GMF066 13A 24 Volt Motor 1 GMF Volt Overload Protection 1 GMF089 14A 24 Volt Overload Protection 1 GM Input Cable 1 GM Crocodile Clamps 1 GM Housing 1 GM Nut 2 GM Gasket 1 GM Re-set Button Cover 1 GM Outlet Hose 1 GM Inlet adapter Fuel Gun Complete 1 GM7655 9

10 COMPONENT PARTS CFT230 Item Description Qty Part No 1 Pump Body 1 GM By-pass 1 GM Capacitor 1 GM V Overload Protector 1 GM Capacitor Housing 1 GM Switch 1 GM Tie Rod 1 GM Power Cable with plug 1 GM Elastic Washer 1 GM Fan Cover 1 GM Fan 1 GM Rear Motor Cover 1 GM Shaft with Rotor 1 GMF Motor with Stator 1 GM Bearing 2 GM Retaining Ring 1 GM Rotor Blade Holder 1 GMF Key 1 GMF Blade 5 GMF O-Ring 1 GM Screw 2 GM Cover 1 GM Re-set Button Cover 1 GM Outlet Adapter 1 GM Outlet Hose 1 GM Inlet Adapter Fuel Gun Complete 1 GM

11 DECLARATION OF CONFORMITY 11

12

230V DIESEL FUEL TRANSFER PUMP MODEL NO: DFT230

230V DIESEL FUEL TRANSFER PUMP MODEL NO: DFT230 230V DIESEL FUEL TRANSFER PUMP MODEL NO: DFT230 PART NO: 7160050 OPERATION & MAINTENANCE INSTRUCTIONS GC0816 INTRODUCTION Thank you for purchasing this CLARKE Pump. The DFTP230 pump is a self-priming rotary

More information

12V OIL & DIESEL PUMP MODEL NO: CFTP12

12V OIL & DIESEL PUMP MODEL NO: CFTP12 12V OIL & DIESEL PUMP MODEL NO: CFTP12 PART NO: 7160100 OPERATION & MAINTENANCE INSTRUCTIONS GC0814 INTRODUCTION Thank you for purchasing this CLARKE Pump. The CFTP12 pump is designed only for use with

More information

SWING ARM MAGNIFYING LAMP MODEL NO: SAM170

SWING ARM MAGNIFYING LAMP MODEL NO: SAM170 SWING ARM MAGNIFYING LAMP MODEL NO: SAM170 PART NO: 54605338 ASSEMBLY & OPERATING INSTRUCTIONS ORIGINAL INSTRUCTIONS GC0217 INTRODUCTION Thank you for purchasing your CLARKE swing arm magnifying lamp,

More information

BATTERY STARTER/CHARGER MODEL NO: BC125, BC190

BATTERY STARTER/CHARGER MODEL NO: BC125, BC190 BATTERY STARTER/CHARGER MODEL NO: BC125, BC190 PART NO: 6210125, 6210200 OPERATION & MAINTENANCE INSTRUCTIONS LS0616 INTRODUCTION Thank you for purchasing this CLARKE Battery starter / charger Please read

More information

OPERATION & MAINTENANCE INSTRUCTIONS

OPERATION & MAINTENANCE INSTRUCTIONS 400W SUBMERSIBLE PUMP WITH FOLDING BASE AND FLOAT SWITCH MODEL NO: PSV6A PART NO: 7230695 OPERATION & MAINTENANCE INSTRUCTIONS LS0315 INTRODUCTION Thank you for purchasing this CLARKE 400W Submersible

More information

250W PUDDLE PUMP WITH AUTO SENSOR MODEL NO: PSP105

250W PUDDLE PUMP WITH AUTO SENSOR MODEL NO: PSP105 250W PUDDLE PUMP WITH AUTO SENSOR MODEL NO: PSP105 PART NO: 7230693 OPERATION & MAINTENANCE INSTRUCTIONS ORIGINAL INSTRUCTIONS LS0917 -- iss 3 INTRODUCTION Thank you for purchasing this CLARKE 250W Puddle

More information

OPERATION & MAINTENANCE INSTRUCTIONS

OPERATION & MAINTENANCE INSTRUCTIONS 750W SUBMERSIBLE PUMP WITH BUILT-IN FLOAT SWITCH MODEL NO: PSV5A PART NO: 7236046 OPERATION & MAINTENANCE INSTRUCTIONS ORIGINAL INSTRUCTIONS LS0917 iss 3 INTRODUCTION Thank you for purchasing this CLARKE

More information

HALOGEN FLOODLIGHTS Models CHL1260C & 1260T Part Nos: &

HALOGEN FLOODLIGHTS Models CHL1260C & 1260T Part Nos: & HALOGEN FLOODLIGHTS Models CHL1260C & 1260T Part Nos: 5460600 & 5460595 OPERATING & MAINTENANCE INSTRUCTIONS GC0610 INTRODUCTION Thank you for purchasing this CLARKE Halogen Floodlight. Before attempting

More information

ORIGINAL INSTRUCTIONS

ORIGINAL INSTRUCTIONS OPERATION & MAINTENANCE INSTRUCTIONS CBB200 Shown here BUFFER/POLISHER MODEL NO: CBB150, CBB200 PART NO: 6500485, 6500490 ORIGINAL INSTRUCTIONS LS0818 - ISS 1 INTRODUCTION Thank you for purchasing this

More information

HIGH FREQUENCY AUTOMATIC BATTERY CHARGER

HIGH FREQUENCY AUTOMATIC BATTERY CHARGER HIGH FREQUENCY AUTOMATIC BATTERY CHARGER MODEL NO: HFBC12 PART NO: 6267000 OPERATION & MAINTENANCE INSTRUCTIONS LS0814 INTRODUCTION Thank you for purchasing this CLARKE High Frequency Automatic Battery

More information

SUBMERSIBLE DIRTY WATER PUMP

SUBMERSIBLE DIRTY WATER PUMP FOR USE WITH A 110V SUPPLY ONLY SUBMERSIBLE DIRTY WATER PUMP MODEL NO: DWP210A PART NO: 7230102 OPERATION & MAINTENANCE INSTRUCTIONS LS0115 INTRODUCTION Thank you for purchasing this CLARKE Submersible

More information

Bore Hole Pump Model Nos: CBB75 CBB100 Part Nos:

Bore Hole Pump Model Nos: CBB75 CBB100 Part Nos: Bore Hole Pump Model Nos: CBB75 CBB100 Part Nos: 7150710 7150715 USER INSTRUCTIONS ORIGINAL INSTRUCTIONS 1117 Thank you for purchasing this CLARKE Bore Hole Pump, which is designed for use in a domestic

More information

LEAD ACID BATTERY CHARGER

LEAD ACID BATTERY CHARGER LEAD ACID BATTERY CHARGER MODEL NO: LA4 & LA6 OPERATION & MAINTENANCE INSTRUCTIONS LS1214 INTRODUCTION Thank you for purchasing this CLARKE Battery Charger. Please read this manual thoroughly, before attempting

More information

OPERATION & MAINTENANCE INSTRUCTIONS

OPERATION & MAINTENANCE INSTRUCTIONS AUTOMATIC BATTERY CHARGER / MAINTAINER MODEL NO: CBO9-6/12 PART NO: 6267020 OPERATION & MAINTENANCE INSTRUCTIONS LS0615 INTRODUCTION Thank you for purchasing this CLARKE product. Before attempting to use

More information

OPERATION & MAINTENANCE INSTRUCTIONS

OPERATION & MAINTENANCE INSTRUCTIONS AUTOMATIC BATTERY CHARGER / MAINTAINER MODEL NO: CBO9-12 PART NO: 6267025 OPERATION & MAINTENANCE INSTRUCTIONS LS0315 INTRODUCTION Thank you for purchasing this CLARKE product. Before attempting to use

More information

OPERATION & MAINTENANCE INSTRUCTIONS

OPERATION & MAINTENANCE INSTRUCTIONS AUTOMATIC BATTERY CHARGER / MAINTAINER MODEL NO: CBO9-12 PART NO: 6267025 OPERATION & MAINTENANCE INSTRUCTIONS ORIGINAL INSTRUCTIONS LS0118 - ISS 3 INTRODUCTION Thank you for purchasing this CLARKE product.

More information

SWIMMING POOL PUMPS Models SPP07, SPP10 & SPP15 Part Nos: , &

SWIMMING POOL PUMPS Models SPP07, SPP10 & SPP15 Part Nos: , & SWIMMING POOL PUMPS Models SPP07, SPP0 & SPP5 Part Nos: 775025, 775030 & 775035 OPERATING & MAINTENANCE INSTRUCTIONS GC054 INTRODUCTION Thank you for purchasing this CLARKE swimming pool pump. Before attempting

More information

SUBMERSIBLE PUMPS HSE RANGE OPERATING & MAINTENANCE INSTRUCTIONS GC0514

SUBMERSIBLE PUMPS HSE RANGE OPERATING & MAINTENANCE INSTRUCTIONS GC0514 SUBMERSIBLE PUMPS HSE RANGE OPERATING & MAINTENANCE INSTRUCTIONS GC0514 INTRODUCTION Thank you for purchasing this CLARKE submersible pump. Before attempting to use the pump, please read this manual thoroughly

More information

1 ELECTRIC WATER PUMP

1 ELECTRIC WATER PUMP 1 ELECTRIC WATER PUMP MODEL NO: BIP1000 PART NO: 7230330 OPERATION & MAINTENANCE INSTRUCTIONS GC0114 INTRODUCTION Thank you for purchasing this Clarke Water Pump. Before attempting to use this product,

More information

SUBMERSIBLE WATER PUMP

SUBMERSIBLE WATER PUMP SUBMERSIBLE WATER PUMP MODEL NO: CSV1A, CSV2A PART NO: 7230582, 7230602 OPERATION & MAINTENANCE INSTRUCTIONS ORIGINAL INSTRUCTIONS 05/14 iss 4 INTRODUCTION Thank you for purchasing this CLARKE Submersible

More information

ELECTRIC CAR POLISHER

ELECTRIC CAR POLISHER ELECTRIC CAR POLISHER MODEL NO: CP254 PART NO: 6462108 OPERATION & MAINTENANCE INSTRUCTIONS LS0610 INTRODUCTION Thank you for purchasing this CLARKE electric car polisher. Before attempting to use this

More information

28W WORK LAMP Model: CTL28 Part No:

28W WORK LAMP Model: CTL28 Part No: 28W WORK LAMP Model: CTL28 Part No: 4002905 INSTRUCTION MANUAL GC0609 INTRODUCTION Thank you for purchasing this CLARKE 28W Work Lamp. Before attempting to use the product, it is essential that you read

More information

BENCH GRINDER WITH LIGHT AND WIRE WHEEL MODEL NO: CBG8370LW

BENCH GRINDER WITH LIGHT AND WIRE WHEEL MODEL NO: CBG8370LW BENCH GRINDER WITH LIGHT AND WIRE WHEEL MODEL NO: CBG8370LW PART NO: 6500533 OPERATION & MAINTENANCE INSTRUCTIONS LS0514 INTRODUCTION Thank you for purchasing this CLARKE Bench Grinder with light and wire

More information

1200W INVERTER GENERATOR

1200W INVERTER GENERATOR 1200W INVERTER GENERATOR MODEL NO: IG1200 PART NO: 8877070 OPERATION & MAINTENANCE INSTRUCTIONS LS0117 INTRODUCTION Thank you for purchasing this CLARKE 1200W Inverter Generator. Before attempting to use

More information

HEAVY DUTY BATTERY BOOSTERS / CHARGERS. MODEL Nos. BC185N & BC205N OPERATING INSTRUCTIONS

HEAVY DUTY BATTERY BOOSTERS / CHARGERS. MODEL Nos. BC185N & BC205N OPERATING INSTRUCTIONS HEAVY DUTY BATTERY BOOSTERS / CHARGERS MODEL Nos. BC185N & BC205N OPERATING INSTRUCTIONS 0614 Thank you for purchasing this CLARKE Battery Charger. These units are suitable for charging and boosting 12

More information

HOT WASHER MODEL NO: KING 125 OPERATION & MAINTENANCE INSTRUCTIONS PART NO: LS1009

HOT WASHER MODEL NO: KING 125 OPERATION & MAINTENANCE INSTRUCTIONS PART NO: LS1009 HOT WASHER MODEL NO: KING 125 PART NO: 7320170 OPERATION & MAINTENANCE INSTRUCTIONS LS1009 INTRODUCTION Thank you for purchasing this Hot Washer. This machine is a portable, high pressure power washer,

More information

BENCH GRINDER MODEL NO: CBG6250

BENCH GRINDER MODEL NO: CBG6250 CBG6250 Bench Grinder.fm Page 1 Thursday, November 10, 2011 3:26 PM BENCH GRINDER MODEL NO: CBG6250 PART NO: 6500522 OPERATION & MAINTENANCE INSTRUCTIONS LS1111 CBG6250 Bench Grinder.fm Page 2 Thursday,

More information

BENCH GRINDER WITH WIRE BRUSH WHEEL, LIGHT AND WHEEL DRESSER MODEL NO: CBG6250LW

BENCH GRINDER WITH WIRE BRUSH WHEEL, LIGHT AND WHEEL DRESSER MODEL NO: CBG6250LW BENCH GRINDER WITH WIRE BRUSH WHEEL, LIGHT AND WHEEL DRESSER MODEL NO: CBG6250LW PART NO: 6500526 OPERATION & MAINTENANCE INSTRUCTIONS LS0514 INTRODUCTION Thank you for purchasing this CLARKE Bench Grinder

More information

ELECTRIC HOIST MODEL NO: CH2500B, CH4000B OPERATION & MAINTENANCE INSTRUCTIONS PART NO: ,

ELECTRIC HOIST MODEL NO: CH2500B, CH4000B OPERATION & MAINTENANCE INSTRUCTIONS PART NO: , ELECTRIC HOIST MODEL NO: CH2500B, CH4000B PART NO: 7630386, 7630391 OPERATION & MAINTENANCE INSTRUCTIONS ORIGINAL INSTRUCTIONS LS0517 - Iss 5 INTRODUCTION Thank you for selecting this Clarke Electric Hoist.

More information

18V CORDLESS DRILL MODEL NO: CON18LiC

18V CORDLESS DRILL MODEL NO: CON18LiC 18V CORDLESS DRILL MODEL NO: CON18LiC PART NO: 6479531 OPERATION & MAINTENANCE INSTRUCTIONS ORIGINAL INSTRUCTIONS GC0817 - ISS 2 INTRODUCTION Thank you for purchasing this CLARKE Cordless Drill. Before

More information

BATTERY BOOSTER/CHARGER MODEL NO: DIGICAR 600

BATTERY BOOSTER/CHARGER MODEL NO: DIGICAR 600 BATTERY BOOSTER/CHARGER MODEL NO: DIGICAR 600 PART NO: 6261200 OPERATION & MAINTENANCE INSTRUCTIONS LS0815 INTRODUCTION Thank you for purchasing this CLARKE Battery booster / charger which is suitable

More information

SUBMERSIBLE PUMP HSE RANGE

SUBMERSIBLE PUMP HSE RANGE SUBMERSIBLE PUMP HSE RANGE OPERATION & MAINTENANCE INSTRUCTIONS 0707 SPECIFICATIONS HSE300* HSE360* Model No. HSE130* HSE200A HSE300A HSE360A HSEC400* HSE301A HSE361A Outlet Dia. (mm/inches) 32/1-1/4 38/1-1/2

More information

SUBMERSIBLE WATER PUMPS

SUBMERSIBLE WATER PUMPS SUBMERSIBLE WATER PUMPS Model Nos. CS85S - CS85SA CS120S - CS120SA CS185S - CS185SA CS240S - CS240SA CS305S - CS305SA OPERATING & MAINTENANCE INSTRUCTIONS 1000 CONTENTS Warranty conditions... 3 Safety

More information

JUMPSTART MODEL NO: JS900/JS910 OPERATING & MAINTENANCE INSTRUCTIONS PART NO: & GC10/16

JUMPSTART MODEL NO: JS900/JS910 OPERATING & MAINTENANCE INSTRUCTIONS PART NO: & GC10/16 JUMPSTART MODEL NO: JS900/JS910 PART NO: 6240010 & 6240020 OPERATING & MAINTENANCE INSTRUCTIONS GC10/16 INTRODUCTION Thank you for purchasing this CLARKE Jump-start. Before attempting to use this product,

More information

24V DC - 1/2 SQUARE DRIVE IMPACT WRENCH KIT

24V DC - 1/2 SQUARE DRIVE IMPACT WRENCH KIT 24V DC - 1/2 SQUARE DRIVE IMPACT WRENCH KIT Model No: CIR220 Part No 4500635 OPERATING & MAINTENANCE INSTRUCTIONS GC02/13 INTRODUCTION Thank you for purchasing this CLARKE Impact Wrench. Before attempting

More information

BATTERY BOOSTER/CHARGER MODEL NO: DIGICAR 900

BATTERY BOOSTER/CHARGER MODEL NO: DIGICAR 900 BATTERY BOOSTER/CHARGER MODEL NO: DIGICAR 900 PART NO: 6261205 OPERATION & MAINTENANCE INSTRUCTIONS LS0715 INTRODUCTION Thank you for purchasing this CLARKE Battery booster / charger which is suitable

More information

BATTERY CHARGER-STARTER

BATTERY CHARGER-STARTER BATTERY CHARGER-STARTER MODEL NO: WBC240 & WBC400 PART NO: 6261505 & 6261515 OPERATION & MAINTENANCE INSTRUCTIONS GC0116 INTRODUCTION Thank you for purchasing this CLARKE Battery Charger/Starter. Please

More information

JUMP STARTER OPERATION & MAINTENANCE INSTRUCTIONS MODEL NO: JSM350 PART NO: ORIGINAL INSTRUCTIONS LS1117-ISS 1

JUMP STARTER OPERATION & MAINTENANCE INSTRUCTIONS MODEL NO: JSM350 PART NO: ORIGINAL INSTRUCTIONS LS1117-ISS 1 JUMP STARTER MODEL NO: JSM350 PART NO: 6239010 OPERATION & MAINTENANCE INSTRUCTIONS ORIGINAL INSTRUCTIONS LS1117-ISS 1 INTRODUCTION Thank you for purchasing this CLARKE product. Please read this manual

More information

5 IN 1 JUMP START OPERATION & MAINTENANCE INSTRUCTIONS MODEL NO: JS5IN1 PART NO: LS0810

5 IN 1 JUMP START OPERATION & MAINTENANCE INSTRUCTIONS MODEL NO: JS5IN1 PART NO: LS0810 5 IN 1 JUMP START MODEL NO: JS5IN1 PART NO: 6240005 OPERATION & MAINTENANCE INSTRUCTIONS LS0810 INTRODUCTION Thank you for purchasing this CLARKE product. Before attempting to use this product, please

More information

JUMPSTART MODEL NO: JS1000, JS1010 & JS1224 OPERATING & MAINTENANCE INSTRUCTIONS PART NO: , & GC0514

JUMPSTART MODEL NO: JS1000, JS1010 & JS1224 OPERATING & MAINTENANCE INSTRUCTIONS PART NO: , & GC0514 JUMPSTART MODEL NO: JS1000, JS1010 & JS1224 PART NO: 6240040, 6240035 & 6240045 OPERATING & MAINTENANCE INSTRUCTIONS GC0514 INTRODUCTION Thank you for purchasing this CLARKE Jumpstart. Before attempting

More information

POND PUMP Model Nos:SPP3 & SPP6 0200

POND PUMP Model Nos:SPP3 & SPP6 0200 OPERATING & MAINTENANCE INSTRUCTIONS POND PUMP Model Nos:SPP3 & SPP6 0200 Thank you for purchasing this CLARKE Water Pump, which is particularly suitable for the filtration of small to medium size swimming

More information

WARNING: Read these instructions before using the machine GENERATOR MODEL NO: IG3500F PART NO: OPERATION & MAINTENANCE INSTRUCTIONS

WARNING: Read these instructions before using the machine GENERATOR MODEL NO: IG3500F PART NO: OPERATION & MAINTENANCE INSTRUCTIONS WARNING: Read these instructions before using the machine GENERATOR MODEL NO: IG3500F PART NO: 8877100 OPERATION & MAINTENANCE INSTRUCTIONS ORIGINAL INSTRUCTIONS LS0217 INTRODUCTION Thank you for purchasing

More information

GENERATOR MODEL NO: FG2500 OPERATION & MAINTENANCE INSTRUCTIONS PART NO: LS0114

GENERATOR MODEL NO: FG2500 OPERATION & MAINTENANCE INSTRUCTIONS PART NO: LS0114 GENERATOR MODEL NO: FG2500 PART NO: 8857727 OPERATION & MAINTENANCE INSTRUCTIONS LS0114 INTRODUCTION Thank you for purchasing this CLARKE Generator. Before attempting to use this product, please read this

More information

MODEL Nos: CVAC20SS CVAC25SS CVAC30SSR OPERATING & MAINTENANCE INSTRUCTIONS. Distributed by CLARKE International Ltd.

MODEL Nos: CVAC20SS CVAC25SS CVAC30SSR OPERATING & MAINTENANCE INSTRUCTIONS. Distributed by CLARKE International Ltd. MODEL Nos: CVAC20SS CVAC25SS CVAC30SSR OPERATING & MAINTENANCE INSTRUCTIONS Distributed by CLARKE International Ltd. 1006 Thank you for selecting this VAC KING Stainless Steel Vacuum Cleaner, which will

More information

18V CORDLESS COMBI DRILL MODEL NO: CON18NI

18V CORDLESS COMBI DRILL MODEL NO: CON18NI CON18NI.fm Page 1 Tuesday, August 21, 2012 11:53 AM 18V CORDLESS COMBI DRILL MODEL NO: CON18NI PART NO: 6485067 OPERATION & MAINTENANCE INSTRUCTIONS LS0812 CON18NI.fm Page 2 Tuesday, August 21, 2012 11:53

More information

BENCH GRINDER WITH LIGHT AND WHEEL DRESSER

BENCH GRINDER WITH LIGHT AND WHEEL DRESSER BENCH GRINDER WITH LIGHT AND WHEEL DRESSER MODEL NO: CBG6250L PART NO: 6500524 OPERATION & MAINTENANCE INSTRUCTIONS LS0811 INTRODUCTION Thank you for purchasing this CLARKE Bench Grinder with light and

More information

720W PORTABLE GENERATOR

720W PORTABLE GENERATOR 720W PORTABLE GENERATOR MODEL NO: G720 PART NO: 8857800 OPERATION & MAINTENANCE INSTRUCTIONS LS0214 INTRODUCTION Thank you for purchasing this CLARKE 720W Portable Generator Before attempting to use this

More information

OPERATING & MAINTENANCE INSTRUCTIONS

OPERATING & MAINTENANCE INSTRUCTIONS BATTERY/BOOSTER CHARGER Model No: BC100C Part No: 6210106 OPERATING & MAINTENANCE INSTRUCTIONS 0915 Specifications Max Charge... 15Amps Duty Cycle... 100% 10A Arith. Max Boost... 100Amps Boost/Charge...

More information

SUBMERSIBLE WATER PUMP

SUBMERSIBLE WATER PUMP SUBMERSIBLE WATER PUMP MODEL No: IVP14A Part No: 7230095 OPERATION & MAINTENANCE INSTRUCTIONS 08/08 INTRODUCTION Thank you for purchasing this CLARKE water pump. This highly efficient centrifugal pump

More information

SUBMERSIBLE WATER PUMP OPERATING & MAINTENANCE INSTRUCTIONS. Model Nos. CSE400A. Part No iss 2

SUBMERSIBLE WATER PUMP OPERATING & MAINTENANCE INSTRUCTIONS. Model Nos. CSE400A. Part No iss 2 SUBMERSIBLE WATER PUMP Model Nos. CSE400A Part No. 7231100 0917 iss 2 OPERATING & MAINTENANCE INSTRUCTIONS Thank you for purchasing this Clarke Submersible Pump. This highly efficient pump is designed

More information

ELECTRIC IMPACT WRENCH

ELECTRIC IMPACT WRENCH ELECTRIC IMPACT WRENCH Model No. CEW000 PART NO: 6480300 OPERATING & MAINTENANCE INSTRUCTIONS GC033 INTRODUCTION Thank you for purchasing this CLARKE Impact Wrench. Before attempting to use the machine,

More information

PROFESSIONAL CORDLESS IMPACT SCREWDRIVER

PROFESSIONAL CORDLESS IMPACT SCREWDRIVER PROFESSIONAL CORDLESS IMPACT SCREWDRIVER Model CIS00 Part No 4500625 OPERATING & MAINTENANCE INSTRUCTIONS GC0309 INTRODUCTION Thank you for purchasing this CLARKE Impact Screwdriver. Before attempting

More information

BATTERY/BOOSTER CHARGER. Model No: BC100N Part No: OPERATING & MAINTENANCE INSTRUCTIONS

BATTERY/BOOSTER CHARGER. Model No: BC100N Part No: OPERATING & MAINTENANCE INSTRUCTIONS BATTERY/BOOSTER CHARGER Model No: BC100N Part No: 6210101 OPERATING & MAINTENANCE INSTRUCTIONS 0906 Specifications Max Charge... 15Amps Duty Cycle... 100% 10A Arith. Max Boost... 100Amps Boost/Charge...

More information

OPERATING & MAINTENANCE INSTRUCTIONS

OPERATING & MAINTENANCE INSTRUCTIONS 8 WETSTONE BENCH GRINDER OPERATING & MAINTENANCE INSTRUCTIONS 0805 Thank you for purchasing this Clarke Bench Grinder. Before attempting to operate this bench grinder please read this instruction manual

More information

HOT AIR GUN MODEL No. CHG 1500B Part No

HOT AIR GUN MODEL No. CHG 1500B Part No HOT AIR GUN MODEL No. CHG 1500B Part No. 3400751 OPERATING & MAINTENANCE INSTRUCTIONS 0201 Thank you for selecting this CLARKE Hot Air Gun, which is designed for DIY and professional use alike. Before

More information

5.5KVA GENERATOR MODEL NO: PG6500DVES OPERATION & MAINTENANCE INSTRUCTIONS PART NO: LS0616

5.5KVA GENERATOR MODEL NO: PG6500DVES OPERATION & MAINTENANCE INSTRUCTIONS PART NO: LS0616 5.5KVA GENERATOR MODEL NO: PG6500DVES PART NO: 8857810 OPERATION & MAINTENANCE INSTRUCTIONS LS0616 INTRODUCTION Thank you for purchasing this CLARKE 5.5KVA Generator. Before attempting to use this product,

More information

SUBMERSIBLE WATER PUMP

SUBMERSIBLE WATER PUMP SUBMERSIBLE WATER PUMP MODEL NO: CSV1A, CSV2A PART NO: 7230582, 7230602 OPERATION & MAINTENANCE INSTRUCTIONS 0608 INTRODUCTION Thank you for purchasing this CLARKE Submersible Water Pump. This pump is

More information

3KVA DUAL VOLTAGE GENERATOR MODEL NO: PG3800DV

3KVA DUAL VOLTAGE GENERATOR MODEL NO: PG3800DV 3KVA DUAL VOLTAGE GENERATOR MODEL NO: PG3800DV PART NO: 8857815 OPERATION & MAINTENANCE INSTRUCTIONS LS1016 INTRODUCTION Thank you for purchasing this CLARKE 3KVA Dual Voltage Generator. Before attempting

More information

BENCH GRINDER MODEL CBG6RP OPERATING & MAINTENANCE INSTRUCTIONS 0101

BENCH GRINDER MODEL CBG6RP OPERATING & MAINTENANCE INSTRUCTIONS 0101 BENCH GRINDER MODEL CBG6RP OPERATING & MAINTENANCE INSTRUCTIONS 0101 Thank you for purchasing this CLARKE Bench Grinder Before attempting to operate this machine, please read this instruction manual thoroughly

More information

PHASE CONVERTERS OPERATING & MAINTENANCE INSTRUCTIONS. MODEL NO: PC40 and PC60. PART Nos:

PHASE CONVERTERS OPERATING & MAINTENANCE INSTRUCTIONS. MODEL NO: PC40 and PC60. PART Nos: PHASE CONVERTERS MODEL NO: PC40 and PC60 MODEL PART No: NO: 6012805 PC20 and PC40 6012810 PC60 PART Nos: 6012800 6012805 6012810 OPERATING & MAINTENANCE INSTRUCTIONS 0107 Specifications PC20 PC40 PC60

More information

RPS1215 ORIGINAL INSTRUCTIONS. Cordless Pruner

RPS1215 ORIGINAL INSTRUCTIONS. Cordless Pruner RPS5 ORIGINAL INSTRUCTIONS Cordless Pruner Important! It is essential that you read the instructions in this manual before assembling, operating and maintaining the product. Subject to technical modification.

More information

SUBMERSIBLE PUMP HSE RANGE

SUBMERSIBLE PUMP HSE RANGE SUBMERSIBLE PUMP HSE RANGE OPERATION & MAINTENANCE INSTRUCTIONS 0806 SPECIFICATIONS Model No. HSE120* HSE200 HSE300*/ HSE360*/ HSEC400* HSE301 HSE361 Outlet Dia. (mm/inches) 32/1-1/4 38/1-1/2 50/2 50/2

More information

ELECTRIC HOIST MODEL NO: CH2500B, CH4000B OPERATION & MAINTENANCE INSTRUCTIONS PART NO: , LS1010

ELECTRIC HOIST MODEL NO: CH2500B, CH4000B OPERATION & MAINTENANCE INSTRUCTIONS PART NO: , LS1010 ELECTRIC HOIST MODEL NO: CH2500B, CH4000B PART NO: 7630386, 7630391 OPERATION & MAINTENANCE INSTRUCTIONS LS1010 INTRODUCTION Thank you for purchasing this CLARKE Electric Hoist. Before attempting to use

More information

ELECTRIC IMPACT WRENCH

ELECTRIC IMPACT WRENCH ELECTRIC IMPACT WRENCH Model No.CEW1000 PART NO:6480300 OPERATING & MAINTENANCE INSTRUCTIONS 12/08 INTRODUCTION Thank you for purchasing this CLARKE Impact Wrench. Before attempting to use the machine,

More information

CORDLESS TACKER MODEL NO: CCT48 OPERATION & MAINTENANCE INSTRUCTIONS PART NO: LS0414

CORDLESS TACKER MODEL NO: CCT48 OPERATION & MAINTENANCE INSTRUCTIONS PART NO: LS0414 CORDLESS TACKER MODEL NO: CCT48 PART NO: 6485070 OPERATION & MAINTENANCE INSTRUCTIONS LS0414 INTRODUCTION Thank you for purchasing this CLARKE product. Before attempting to use this product, please read

More information

BENCH GRINDER MODEL CBG6RZ OPERATING & MAINTENANCE INSTRUCTIONS

BENCH GRINDER MODEL CBG6RZ OPERATING & MAINTENANCE INSTRUCTIONS BENCH GRINDER MODEL CBG6RZ OPERATING & MAINTENANCE INSTRUCTIONS 0100 9 Thank you for purchasing this CLARKE BENCH GRINDER. Before attempting to operate this machine, please read this instruction manual

More information

1100W PORTABLE GENERATOR

1100W PORTABLE GENERATOR 1100W PORTABLE GENERATOR MODEL NO: G1200 PART NO: 8010110 OPERATION & MAINTENANCE INSTRUCTIONS LS0312 INTRODUCTION Thank you for purchasing this CLARKE 1100W Portable Generator. Before attempting to use

More information

RMT1201. ORIGINAL INSTRUCTIONS Cordless Multi-Tool

RMT1201. ORIGINAL INSTRUCTIONS Cordless Multi-Tool RMT1201 ORIGINAL INSTRUCTIONS Cordless Multi-Tool Important! It is essential that you read the instructions in this manual before operating this machine. Subject to technical modifications. Safety GENERAL

More information

24V DC - 1/2 SQUARE DRIVE IMPACT WRENCH KIT

24V DC - 1/2 SQUARE DRIVE IMPACT WRENCH KIT 24V DC - 1/2 SQUARE DRIVE IMPACT WRENCH KIT MODEL No. CIR24 Part No. 4500620 OPERATING & MAINTENANCE INSTRUCTIONS 1006 Thank you for purchasing this CLARKE 24 volt DC, 1/2 Square Drive Impact Wrench. Please

More information

CORDLESS IMPACT WRENCH

CORDLESS IMPACT WRENCH CORDLESS IMPACT WRENCH MODEL NO: CIR450C PART NO: 4500633 OPERATING & MAINTENANCE INSTRUCTIONS GC0415 INTRODUCTION Thank you for purchasing this CLARKE Impact Wrench. Before attempting to use this product,

More information

HEAVY DUTY BATTERY BOOSTERS / CHARGERS. MODEL Nos. BC260N & BC335 OPERATING & MAINTENANCE INSTRUCTIONS

HEAVY DUTY BATTERY BOOSTERS / CHARGERS. MODEL Nos. BC260N & BC335 OPERATING & MAINTENANCE INSTRUCTIONS HEAVY DUTY BATTERY BOOSTERS / CHARGERS MODEL Nos. BC260N & BC335 OPERATING & MAINTENANCE INSTRUCTIONS 0707 Thank you for purchasing this CLARKE Battery Charger. These units are suitable for charging and

More information

CORDLESS COMPRESSOR WITH SPOTLIGHT + JUMP START

CORDLESS COMPRESSOR WITH SPOTLIGHT + JUMP START CSS1 - Spotlight compressor (08-0540-2).book Page 1 Thursday, June 17, 2010 10:26 AM CORDLESS COMPRESSOR WITH SPOTLIGHT + JUMP START MODEL NO: CSS1 PART NO: 6240055 OPERATION & MAINTENANCE INSTRUCTIONS

More information

AIR FILTER MODEL NO: AF1000 OPERATION & MAINTENANCE INSTRUCTIONS PART NO:

AIR FILTER MODEL NO: AF1000 OPERATION & MAINTENANCE INSTRUCTIONS PART NO: AIR FILTER MODEL NO: AF1000 PART NO: 6471160 OPERATION & MAINTENANCE INSTRUCTIONS 1208 INTRODUCTION Thank you for purchasing this Clarke Air Filter. Before you try to use this product, read this manual

More information

SUBMERSIBLE PUMP. Model No: HIPPO 2 OPERATING & MAINTENANCE INSTRUCTIONS

SUBMERSIBLE PUMP. Model No: HIPPO 2 OPERATING & MAINTENANCE INSTRUCTIONS SUBMERSIBLE PUMP Model No: HIPPO 2 OPERATING & MAINTENANCE INSTRUCTIONS 0107 1 HIPPO 2 240 Volt and 110 Volt models Thank you for purchasing this Clarke Hippo 2 Pump. Before attempting to operate this

More information

VARIABLE SPEED JIG SAW

VARIABLE SPEED JIG SAW VARIABLE SPEED JIG SAW CORDLESS Part No. IMPACT 6460200 DRILL CORDLESS IMPACT DRILL MODEL No. CON24 Part No. 6485065 OPERATING & MAINTENANCE INSTRUCTIONS 1 LS0610 Thank you for purchasing this CLARKE Cordless

More information

BOOSTER PUMPS Models Nos: BPT600 & BPT1200SS Part Nos: &

BOOSTER PUMPS Models Nos: BPT600 & BPT1200SS Part Nos: & BOOSTER PUMPS Models Nos: BPT600 & BPT1200SS Part Nos: 7237004 & 7237006 OPERATING & MAINTENANCE INSTRUCTIONS GC1011rev2a INTRODUCTION Thank you for purchasing this CLARKE Booster Pump. Before attempting

More information

Cordless Rechargeable Saw Instructions for Use

Cordless Rechargeable Saw Instructions for Use Technical data Voltage: DC 10.8V Weight: 1.25Kg Stroke rate: 0-2100/min Stroke: 15mm Cutting capacity: max diameter in wood 80mm / in soft metal 7mm Charging time: Between 5.0-5.5 Hours Battery: 1.3Ah

More information

Car Battery Charger Instructions for Use

Car Battery Charger Instructions for Use BATTERY CHARGER 12Volt 4Amp FOR INDOOR USE ONLY Power Details: Input: 230-240Vac; 50Hz; 52W Output: 12V DC; 2.8A Maximum Charge Rate: 4A RMS Read these instructions before operating this car battery charger

More information

HEAVY DUTY BATTERY BOOSTERS / CHARGER MODEL No. BC420N

HEAVY DUTY BATTERY BOOSTERS / CHARGER MODEL No. BC420N HEAVY DUTY BATTERY BOOSTERS / CHARGER MODEL No. BC420N OPERATING & MAINTENANCE INSTRUCTIONS 1206 SPECIFICATIONS Supply Voltage 230 Max Charge (Amps) 60 (cont) Max Boost (Amps) 400 Boost/Charge (Volts)

More information

TRICKLE CHARGER MODEL NO: ATC12VB OPERATION & MAINTENANCE INSTRUCTIONS PART NO: ORIGINAL INSTRUCTIONS LS0618 ISS 2

TRICKLE CHARGER MODEL NO: ATC12VB OPERATION & MAINTENANCE INSTRUCTIONS PART NO: ORIGINAL INSTRUCTIONS LS0618 ISS 2 TRICKLE CHARGER MODEL NO: ATC12VB PART NO: 6266012 OPERATION & MAINTENANCE INSTRUCTIONS ORIGINAL INSTRUCTIONS LS0618 ISS 2 INTRODUCTION Thank you for selecting this Clarke Trickle Charger. Read this manual

More information

ARC ACTIVATED HEADSHIELDS

ARC ACTIVATED HEADSHIELDS ARC ACTIVATED HEADSHIELDS MODEL NO: GWH1,GWH2 & GWH3 PART NO: 6000704, 6000697 & 600698 OPERATION & MAINTENANCE INSTRUCTIONS GC01/14 INTRODUCTION Thank you for purchasing this CLARKE Headshield. Before

More information

6 x 10 Belt Disc Sander

6 x 10 Belt Disc Sander 6 x 10 Belt Disc Sander FOR HELP OR ADVISE ON THIS PRODUCT PLEASE CALL OUR CUSTOMER SERVICE HELP LINE : 01509 500400 THE MANUFACTURER RESERVES THE RIGHT TO ALTER THE DESIGN OR SPECIFICATION TO THIS PRODUCT

More information

original instructions 18V Torch RFP1801

original instructions 18V Torch RFP1801 original instructions 18V Torch RFP1801 Important! It is essential that you read the instructions in this manual before operating this machine. Subject to technical modifications. Safety GENERAL POWER

More information

VARIABLE SPEED JIG SAW

VARIABLE SPEED JIG SAW VARIABLE SPEED JIG SAW RANDOM ORBITAL Part No. 646000 SANDER RANDOM ORBITAL SANDER MODEL No. CROS Part No. 6460 OPERATING & MAINTENANCE INSTRUCTIONS 0307 Thank you for purchasing this CLARKE Variable Speed

More information

PROFESSIONAL CORDLESS IMPACT WRENCH

PROFESSIONAL CORDLESS IMPACT WRENCH PROFESSIONAL CORDLESS IMPACT WRENCH Model CIR450 Part No 4500630 OPERATING & MAINTENANCE INSTRUCTIONS GC0309 INTRODUCTION Thank you for purchasing this CLARKE Impact Wrench. Before attempting to operate

More information

GENERATOR MODEL NO: FG3005 OPERATION & MAINTENANCE INSTRUCTIONS PART NO: LS0413

GENERATOR MODEL NO: FG3005 OPERATION & MAINTENANCE INSTRUCTIONS PART NO: LS0413 GENERATOR MODEL NO: FG3005 PART NO: 8857707 OPERATION & MAINTENANCE INSTRUCTIONS LS0413 INTRODUCTION Thank you for purchasing this CLARKE Generator. Before attempting to use this product, please read this

More information

Pro Booster 802Li. Please read and fully understand the instructions in this manual before operation. Keep this manual safe for future reference.

Pro Booster 802Li. Please read and fully understand the instructions in this manual before operation. Keep this manual safe for future reference. Please dispose of packaging for the product in a responsible manner. It is suitable for recycling. Help to protect the environment, take the packaging to the local amenity tip and place into the appropriate

More information

12v / 24v Diesel Transfer Pump Kit

12v / 24v Diesel Transfer Pump Kit Please dispose of packaging for the product in a responsible manner. It is suitable for recycling. Help to protect the environment, take the packaging to the local amenity tip and place into the appropriate

More information

MONZA OIL FREE AIR COMPRESSOR OPERATION & MAINTENANCE INSTRUCTIONS

MONZA OIL FREE AIR COMPRESSOR OPERATION & MAINTENANCE INSTRUCTIONS MONZA OIL FREE AIR COMPRESSOR OPERATION & MAINTENANCE INSTRUCTIONS 0702 PARTS & SERVICE CONTACTS For Spare Parts and Service, please contact your nearest dealer, or CLARKE International, on one of the

More information

PRESSURISED SANDBLASTER MODEL NO: CPSB100B PART NO: OPERATION & MAINTENANCE INSTRUCTIONS

PRESSURISED SANDBLASTER MODEL NO: CPSB100B PART NO: OPERATION & MAINTENANCE INSTRUCTIONS PRESSURISED SANDBLASTER MODEL NO: CPSB100B PART NO: 7640133 OPERATION & MAINTENANCE INSTRUCTIONS ORIGINAL INSTRUCTIONS GC0218 ISS1 INTRODUCTION Thank you for purchasing this CLARKE Pressurised Sandblaster.

More information

12 amp RMS Battery Charger

12 amp RMS Battery Charger 12 amp RMS Battery Charger 83-5000-12 If faults cannot be remedied, contact the Helpline on 020 8391 6767 helpline@hilka.co.uk Manufactured under license by Hilka Pro Imports GUARANTEE This product is

More information

KING 130 HOT WASHER Part No Product Serial No:...

KING 130 HOT WASHER Part No Product Serial No:... KING 130 HOT WASHER Part No. 7320510 OPERATING & MAINTENANCE INSTRUCTIONS Product Serial No:... 0601 SPECIFICATIONS Motor...230V 50hz Power Rating...2.6kW Fuse Rating...13Amps Noise Level...73dBA Max.

More information

GENERATOR MODEL NO: FG3000 OPERATION & MAINTENANCE INSTRUCTIONS PART NO: LS0609

GENERATOR MODEL NO: FG3000 OPERATION & MAINTENANCE INSTRUCTIONS PART NO: LS0609 GENERATOR MODEL NO: FG3000 PART NO: 8857700 OPERATION & MAINTENANCE INSTRUCTIONS LS0609 INTRODUCTION Thank you for purchasing this CLARKE Generator. Before attempting to use this product, please read this

More information

4V LITHIUM-ION SCREWDRIVER OWNER S OPERATING MANUAL

4V LITHIUM-ION SCREWDRIVER OWNER S OPERATING MANUAL CSD-4107BG 4V LITHIUM-ION SCREWDRIVER OWNER S OPERATING MANUAL Your screwdriver has been engineered and manufactured to our high standard for dependability, ease of operation, and operator safety. When

More information

BATTERY BOOSTERS / CHARGERS BC120N BC130N BC210N BC320E BC410E BC520N

BATTERY BOOSTERS / CHARGERS BC120N BC130N BC210N BC320E BC410E BC520N BATTERY BOOSTERS / CHARGERS BC120N BC130N BC210N BC320E BC410E BC520N OPERATING INSTRUCTIONS 1106 SPECIFICATIONS MODEL 120N 130N 210N 320E 410E 520N MAX CHARGE (AMPS) 15 15 25 35 35 50 MAX BOOST (AMPS)

More information

PRESSURISED SANDBLASTER MODEL NO: CPSB200B

PRESSURISED SANDBLASTER MODEL NO: CPSB200B PRESSURISED SANDBLASTER MODEL NO: CPSB200B PART NO: 7640134 OPERATION & MAINTENANCE INSTRUCTIONS ORIGINAL INSTRUCTIONS GC0218 ISS 1 INTRODUCTION Thank you for purchasing this CLARKE Pressurised Sandblaster.

More information

ELECTRIC ENGRAVER 15W WARRANTY INSTRUCTION MANUAL SPECIFICATIONS WHAT S IN THE BOX. ozito.com.au. Electric Engraver

ELECTRIC ENGRAVER 15W WARRANTY INSTRUCTION MANUAL SPECIFICATIONS WHAT S IN THE BOX. ozito.com.au. Electric Engraver IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE

More information

9 (230mm) ANGLE GRINDER Model No. CAG232

9 (230mm) ANGLE GRINDER Model No. CAG232 9 (230mm) ANGLE GRINDER Model No. CAG232 OPERATING & MAINTENANCE INSTRUCTIONS 1104 SPECIFICATIONS Motor... 230V~ 50Hz 1ph Power Rating... 2000Watts Fuse Rating... 13Amps No Load Speed... 6,000RPM Wheel/Disc

More information

RECHARGEABLE SPOTLIGHT

RECHARGEABLE SPOTLIGHT RECHARGEABLE SPOTLIGHT MODEL: RWL10 Part No: 4002822 INSTRUCTION MANUAL LS0609 INTRODUCTION Thank you for purchasing this CLARKE product Before attempting to use the product, it is essential that you read

More information

PRESSURISED SANDBLASTER

PRESSURISED SANDBLASTER PRESSURISED SANDBLASTER MODEL NO: CPSB200 PART NO: 7640128 OPERATION & MAINTENANCE INSTRUCTIONS LS1211 INTRODUCTION Thank you for purchasing this Clarke Pressurised Sandblaster. Before you try to use this

More information