Reed Switch - Standard & Miniature Switches

HV reed relays K-551H, K-552H K-553H, K-554H, K-555H, K-556S form A contact (normally open) for PCBs

HV reed relays K-55H, K-55H K-55H, K-55H, K-555H, K-556S K-55H K-55H K-55H K-55H K-555H K-556S.CONTACT 0 Breakdown voltage min kv DC 7 0 7 8 9 0 Switching current max A 50 Load 5 kv DC, ma 0,5x0 6 Load

HIGH-TEMPERATURE (200 C), HIGH-PERFORMANCE TO-5 RELAY

HIGH-TEMPERATURE (200 C), TO-5 RELAY DPDT SERIES SERIES DESIGNATION RELAY TYPE DPDT high-temperature relay DPDT high-temperature magnetic-latching relay DPDT sensitive high-temperature relay INTERNAL CONSTRUCTION

FARADAY S LAW ELECTROMAGNETIC INDUCTION

FARADAY S LAW ELECTROMAGNETIC INDUCTION magnetic flux density, magnetic field strength, -field, magnetic induction [tesla T] magnetic flux [weber Wb or T.m 2 ] A area [m 2 ] battery back t T f angle between

Reed Technology. standexmeder.com

Reed Technology standexmeder.com How Reed Switches are used with a Permanent Magnet Using Reed Switches in a sensing environment, one generally uses a magnet for actuation. It is important to understand

RI-80 SMDH Series Housed Dry Reed Switch

formerly RI-80 SMDH Series Housed Dry Reed Switch RI-80 SMDH Series Ultra-micro dry-reed switch hermetically sealed in a gas-filled glass envelope. Single-pole, single-throw (SPST) type, having normally

Series 80 Mighty Mouse Technical Reference Complete Product Specification

80 Mighty Mouse Technical Reference Reference SRIPTION RQUIRMNT PROUR TRI ontact resistance S S39029 Table V Max Wire Test Voltage Size urrent rop 12 23 42 14 17 40 16 13 49 20 7.5 55 22 5 73 24 3 45 26

Technical data. Standards: IEC/EN chromated and painted Protection class: IP 67 to EN 60529

B 20 16 21,5 M 16x1,5 60 5 1 52 Aluminium enlosure Long life on-contacting principle 1 Reed contact Particularly resistant to vibration Available for actuation from front or side Actuating distance up

LINEAR MOTION AND ALIGNMENT

LINAR MOTION AN ALIGNMNT Section Introduction to Linear Shift Mechanisms 094 Linear Shift Mechanism Actuation Options 096 Standard Linear Shift Mechanism (LSM ) 098 Long Travel Linear Shift Mechanism (LSML

PRODUCT SPECIFICATIONS

PRODUCT SPECIFICATIONS Reed Switches and Proximity Sensors 1 REED SWITCHES HIGH POWER 7 UNIVERSAL HIGH POWER & HIGH VOLTAGE 7 Form A Form C Form C Form A Form C 196W 134W 156W 634W 637W 907W 834W 933W

Liquid Level Switches and Sensors

Liquid Level Switches and Sensors Madison Company's comprehensive line of level sensors includes single- and multi-point level switches, continuous level and conductivity sensors and more. The wide selection

Presentation, Application Severe Duty Limit Switches Mill and Foundry Switches Conforming to NEMA A600 and UL508

Presentation, pplication Severe uty Limit Switches 0 onforming to NEM 600 and UL508 escription 9007T Mill Switches Use the 9007T Mill switches instead of other limit switches in the following applications:

Technical data. Standards: IEC/EN thermoplastic tightening force on nut 22 mm A/F max. 300 Ncm Protection class: IP 67 to EN 60529

B /V Ø 20 0 5 60 Pg 00 22 3 Actuation from front Thermoplastic enclosure Central mounting Long life on-contacting principle Pre-wired cable available, cable length 1 m Protection class IP 6 When the switches

QBV SERIES Butterfly Valves

QV SERIES utterfly Valves KEY HIGH VUUM PROUTS, IN.'s QV Series butterfly valves are designed and manufactured to offer reliable performance, be versatile and offer an economic benefit. These valves have

Basic Electrical Parameters of Reed Switch Products

REED SWITCH CHARACTERISTICS Basic Electrical Parameters of Reed Switch Products MEDER electronic Pull-In (PI) is described as that point where the contacts close. Using a magnet, it is usually measured

CX-Series. Circuit Breaker

CX-Series Circuit Breaker The CX-Series circuit breaker features a unique and innovative arc-quenching configuration that allows the breaker to safely handle high amperage and high DC voltage applications

The Basic Reed Switch

REED SWITCH CHARACTERISTICS The Basic Reed Switch MEDER electronic Shown below in Figure # 1, Throw (DPST)), 3 Form A (three normally open switches), etc. A normally closed (N.C.) switch is described as

Surface Mount Aluminum Electrolytic Capacitors NACZF Series

FETURES YLINRIL LELESS TYPE FOR SURFE MOUNTING HIGH PITNE VLUES (UP TO 6800µF) LO IMPENE/HIGH RIPPLE URRENT T 100KHz 12.5mm x 17mm ~ 18mm x 22mm SE SIZES IE TERMINTION STYLE FOR HIGH VIRTION.PPLITIONS

How to Order - MDM-PCB Series. MOUNTING HARDWARE (Shell Flange) MOUNTING HARDWARE FOR PCB TERMINATION TAIL LENGTH MODIFICATION CODE

ca_1-102:layout 1 2/10/11 11:51 M Page 1 Micro- P - " ontact Spacing MM-P MM-P connectors are designed for use with flex circuitry, flat cable and printed circuit boards or multi-layer boards. They use

D2SW. Sealed Subminiature Basic Switch Conforming to IP67 (Excluding the terminals on terminal models) Model Number Legend

ealed ubminiature Basic witch ealed ubminiature Basic witch Conforming to IP67 (Excluding the terminals on terminal ) Use of epoxy resin assures stable sealing, making this switch ideal for places subject

Installation Instructions - K-Safe-T-Rip Belt Rip Detector

Kinder Australia product: Preferred Setup Instructions Note: The correct Belt Rip pick up detachment operation of the Rip Socket, is in a sideways motion to the attachment point. This means once the Socket

D2SW. Sealed Subminiature Basic Switch Conforming to IP67 (Excluding the terminals on terminal models) Model Number Legend

ealed ubminiature Basic witch ealed ubminiature Basic witch Conforming to IP67 (Excluding the terminals on terminal ) Use of epoxy resin assures stable sealing, making this switch ideal for places subject

B3F. Miniature, Space-saving Switch

B3F Miniature, Space-saving Switch Long mechanical / electrical service life Ideal for applications such as audio, office and communications equipment, TVs, etc Taped radial, vertical, high-force, and

SMD2. Compact cylinder. Space saving structure 6, 10, 16 20, 25, 32. Simple square design. Switch integrated. Easy centering. Precise installation

pace saving structure Overview his direct mount cylinder is a high rigidity/small square air cylinder with excellent installation accuracy and multisurface direct mount. he square shaped body improves

VR61 and VR62 3/2, 2 x 3/2, 5/2 and 5/3 directional control solenoid and pilot valves 1/4 or 3/8

V6 and V6 /, x /, 5/ and 5/ directional control solenoid and pilot valves / or /8 igh flow rate roven sealing system using erion experience in the chemical and process industry aintenance-free ptional

PCB Relay. Contact form Terminals Coil terminals Rated voltage Model SPST-NO #250 tab terminals PCB terminals 5, 12, 24 VDC G4A-1A

PCB Relay Miniature Single-pole Relay with 80-A Surge Current and 20-A Switching Current Ideal for motor switching. Miniature, relay with high switching capacity built-in applications. Creepage distance

Figure 1 Linear Output Hall Effect Transducer (LOHET TM )

PDFINFO p a g e - 0 8 4 INTRODUCTION The SS9 Series Linear Output Hall Effect Transducer (LOHET TM ) provides mechanical and electrical designers with significant position and current sensing capabilities.

V50... V53 Series 3/2, 5/2 and 5/3 way valves Solenoid actuated and pilot operated 1/8... 1/2

50... 5 eries /2, 5/2 and 5/ way valves olenoid actuated and pilot operated /8... /2 igh flow in-line valves ompact and robust design ow power energy efficient solenoids lexible in-line and manifold mounting

More Precision. mainsensor Magneto-inductive displacement sensor

More Precision mainsensor Magneto-inductive displacement sensor mainsensor Magneto-inductive sensors for non-contact linear displacement measurement Measuring principle mainsensor is based on an innovative

General Specifications

Series HB Subminiature Pushbuttons General Specifications Electrical apacity (Resistive Load) Power Level (silver): 0.1A maximum @ 30V A/ Other Ratings ontact Resistance: 50 milliohms maximum Insulation

ENERPAC hydraulic valves are available in a wide variety of models and configurations.

irectional ontrol s EE hydraulic valves are available in a wide variety of models and configurations. Whatever your requirements directional control, flow control, or pressure control you can be sure that

Ordering Information. General-purpose Basic Switch X. Direct Current Switch with Built-in Magnetic Blowout. Model Number Legend

General-purpose Basic Switch X Direct Current Switch with Built-in Magnetic Blowout Incorporates a small permanent magnet in the contact mechanism to deflect the arc to effectively extinguish it. Ideal

SA2 Series High Voltage Gas Discharge Tube

*RoHS COMPLIANT Features n Formerly a n High insulation resistance n Quick response, long service life n Available DC breakdown range: 2.4 kv to 7.2 kv n Wide operating temperature range n RoHS compliant*

TV-5, TV-8 rated 10mm flat power relays Silent type is available

TV-, TV- rated 1mm flat power relays Silent type is available LK-F RELAYS TV standards compatible: TV- and TV- TV- type: 7 A inrush current and switching possible at A rated current. : 11 A inrush current

How to Order 1 T Z A. r Pressure range. 05 Pressure range 0 to 0.5 MPa 10 Pressure range 0 to 1 MPa 16 Pressure range 0 to 1.6 MPa

oolant Valve Series S External pilot solenoid S ir operated S How to Order 0 0 Y 0 0 T Z q w e r t y u i o!0!!!!! q Series S00 S00 S00 w Valve type ormally closed ormally open e Seal material R FKM r Pressure

PCB Relay. Ordering Information. Surface Mounting DPDT Relay G6S

PCB Relay Surface Mounting DPDT Relay Long terminals for ideal for soldering and mounting reliability. Space-saving inside-l terminal. High dielectric strength between coil and contacts (2,000 VAC), and

Series variation. Rotary actuator (vane mechanism) RV3* Series. Compact (RV3*1 to RV3*30) : Standard, : Option, : Not available

F J H2 L2 N/ S/F Variation Standard type With valve ngle variable type Series variation ompact ( to ) Model no. RVS RV RVS RV RVS RV RVS2 RV2 RVS RV RVS V W RV V W RVS V W2 RV V W2 RVS V W RV V W RVS RV

Type Plunger Switch height Operating force Model Without ground terminal With ground terminal. 5.0 mm General-purpose: 100 g 150 g

Tactile Switch BF Miniature, Space-Saving Tactile Switch Provides Long Service Life and Easy Mounting Extended mechanical/electrical service life: 0 x 0 6 operations for x mm type and x 0 6 operations

Basic Electrical Parameters of Reed Switch Products

REED SWITCH CHARACTERISTICS MEDER electronic Basic Electrical Parameters of Reed Switch Products Pull-In (PI) is described as that point where the contacts close. Using a magnet, it is usually measured

Vulcan Parallel Spring Diaphragm Type Seals. Section

Vulcan Parallel pring Diaphragm Type eals 48 ection INTRODUTION Vulcan s Parallel pring Diaphragm Type eals are highly proficient and widely utilised, covering all standard pump shaft, working length and

PRX Series Compact Switches PRX-10, PRX-20, PRX-30, PRX-40, PRX-50, PRX-70

PRX eries Compact witches,,, PRX-40,, PRX-70 o standby power requirements The PRX series from Gems offers a versatile line of low cost, general purpose proximity sensors designed for dry applications.

Notes: Note1: values at nominal input voltage and full load. 8.5VDC 5V 8V. Open, Efficiency vs. Input Voltage. Efficiency [%]

Features ICE Technology* Description +115 C Maximum Case Temperature -45 C Minimum Case Temperature Built-in EMC Filter Ribbed Case Style 22VDC Isolation Wide 4:1 Input Voltage Range EN-522 Class B The

Electronic circuit breaker EBU10-T

Description The electronic circuit protector type EBU10-T (Electronic Breaker Unit) provides selective overcurrent protection in AC 230 V UPS systems. It consists of an MCB approved for short circuit interruptions

4 A CAPACITY, THE VARIETY OF CONTACT ARRANGEMENTS

4 A CAPACITY, THE VARIETY OF CONTACT ARRANEMENT RELAY RoH Directive compatibility information http://www.mew.co.jp/ac/e/environment/ FEATURE 1. Compact with high sensitivity The highefficiency polarized

PERFORMANCE SPECIFICATION SHEET SWITCHES, SENSITIVE, SPDT, UNSEALED

INCH-POUND 14 June 2010 SUPERSEDING 22 May 2006 PERFORMANCE SPECIFICATION SHEET SWITCHES, SENSITIVE, SPDT, UNSEALED This specification is approved for use by all Departments and Agencies of the Department

P7604 Family SHIELDED POWER INDUCTOR PRODUCT DATA SHEET

PRODUCT DATA SHEET SHIELDED POWER INDUCTOR P7604 Family Features Magnetic Shielding High Current (to 5A) Low DCR (to 20mΩ) Low profile (3-7mm) Surface Mount Flat top for pick & place Pb-free Applications

Product Information Packet M1509T 7.5/3.8HP,1740/860RPM,3PH,60HZ,215T,3754

Product Information Packet M1509T 7.5/3.8HP,1740/860RPM,3PH,60HZ,215T,3754 Copyright All product information within this document is subject to ABB Motors and Mechanical Inc. copyright protection, unless

Worm Gear Hand Winches Up to 4000 lb capacity

IO 900 ertified Worm Gear and Winches Up to 4000 lb capacity achine ut Worm Gears provide accurate operation and long lasting service. nclosed Oil ath provides continuous lubrication of gears to minimize

K12 High Performance Key Switches

High Performance Features/Benefits Typical Applications Excellent tactile feel Automotive Wide choice of LE colors, Off-road transportation travel and actuator forces Industrial electronics High reliability

any other M6 hole. The Tether Point Wire is approximately 1m STR- SSB- (1, 2, 3, 4, 5 or 6) -TP

1 Electric Control Products: Preferred Setup Instructions Note: The correct Belt Rip pick up detachment operation of the Rip Socket, is in a sideways motion to the attachment point. This means once the

High-force: 230 g. Projected 7.3 mm General-purpose: 160 g. High-force: 230 g. Flat 4.3 mm General-purpose: 200 g.

Tactile Switch BW Tactile Switch with Sealed Construction for Automatic Soldering Sealed construction conforming to IP67 (IEC-6059) provides high reliability in locations exposed to dust or water. Available

COMPONENTS. High-speed DC circuit-breakers for Rolling Stock Type UR6, UR10 & UR15

OMPONNT Highspeed circuitbreakers for Rolling tock Type UR, UR & UR General information UR, UR and UR are highspeed current limiting circuitbreakers with natural cooling, trip free, single pole, bidirectional,

HANNAY REELS. Spray Hose Reels. The reel leader. Reels to handle hose for: Grounds Maintenance Pest Control Vehicle Maintenance Steam Cleaning

Spray ose Reels NNY RLS The reel leader. Reels to handle hose for: rounds Maintenance Pest ontrol Vehicle Maintenance Steam leaning Lawn are Service Tree Spraying eneral Maintenance griculture -9450-S

2 x 3/2 Way Valves Series S10

x / Way Valves Series S0 G/ and -In Connections OD 6 mm Actuation systems: Pneumatic Electrical pilot actuated Versions: x normally closed x normally open x normally closed and x normally open With external

Note1: Typical values at nominal input voltage and full load. 39VDC. Efficiency vs. Input Voltage. Efficiency [%]

Features ICE Technology* Description +115 C Maximum Case Temperature -45 C Minimum Case Temperature Baseplate Case Style 2250VDC Isolation Wide 4:1 Input Voltage Range EN-50155 and EN-50121-3-2 Certified

Scheda prodotto Relè Series E

Relè Miniatura All-or-Nothing relays ideally suited for any electronic appliances demanding very compact design and low power consumption. Design includes a protective dust cover and a completete range

Note1: Typical values at nominal input voltage and full load. 39VDC. Efficiency vs. Input Voltage. Efficiency [%]

Features ICE Technology* Description +115 C Maximum Case Temperature -45 C Minimum Case Temperature Built-in EMC Filter Baseplate Case Style 2250VDC Isolation Wide 4:1 Input Voltage Range EN-50155 and

ACME SCREW LINEAR ACTUATOR OVERALL DIMENSIONS. Motor cable length 0.3 m. T [mm]

ACME SCREW LINEAR ACTUATOR ATL 02 Stroke Actuator with DC motor La =Lc + Stroke Lc T OVERALL DIMENSIONS Rear bracket SP Pin Actuator with or 3-phase motor Capacitor Stroke end reed switches FCM Motor cable

1326AS Series 460V, Low Inertia, Brushless Servo s Product Data This publication provides product information for the 0.49 to 49.3 N-m (4.33 to 436 lb-in.) 1326AS Series 460V, Low Inertia, Brushless Servo

K12 High Performance Key Switches

Features/Benefits Excellent tactile feel Wide choice of LE colors, travel and actuator forces High reliability / long life Sealed version available esigned for low-level switching ouble stroke version

Dev Bhoomi Institute Of Technology LABORATORY Department of Electrical And Electronics Engg. Electro-mechanical Energy Conversion II

REV. NO. : REV. DATE : PAGE: 1 Electro-mechanical Energy Conversion II 1. To perform no load and blocked rotor tests on a three phase squirrel cage induction motor and determine equivalent circuit. 2.

Proportional Directional Control Valves Series D*1FE. General Description. Features. D41FE Standard

Technical Information General Description pilot operated proportional valves are designed for high precision applications that require a safe middle position of the main spool at power down. The pilot

SVE135 Sealed High-Voltage Contactor Having High Overcurrent Withstand Capability

VE135 ealed High-Voltage Contactor Having High Over Withstand Capability AKA, Yasuhiro * HIBA, Yuji * AKURAI, Yuya * A B T R A C T The spread of environmentally friendly vehicles mounted with large-capacity

Powers TM Controls RL 243 SW Switching Relay

Powers TM ontrols RL 243 W witching ocument No. 155-040P25 RL 243-4 escription The Powers 243 W witching is a two-position, pilot-operated auxiliary device used for switching a common part from one pneumatic

THE PRODUCTION COMPARATOR STAND

845-454-3111 800-549-4243 THE PRODUCTION COMPARATOR STAND The Dorsey E1 comparator stand is specially designed for use in production and shop areas. The comparator stand has a large base and 3" throat

Amphenol Amphenol Pcd Terminal Junction Systems

igh Quality Interconnect Products or Military and erospace pplications mphenol mphenol Pcd Terminal unction Systems Terminal unction Systems MIL-T-171 Series I lass MIL-T-171 Series I unction Modules QPL-approved

HV reed relays K-551H, K-552H K-553H, K-554H, K-555H. form A contact (normally open) for PCBs

HV reed relays K-55H, K-55H K-55H, K-55H, K-555H PIT-RADWAR S.A. 50-5 Wrocław, ul. Krakowska 6, Poland tel. (+8) 7/-65-5, fax (+8) 7/-58-59.CONTACT K-55H K-55H K-55H K-55H K-555H Switching power max W,

TL RELAYS. TYPICAL APPLICATIONS Head lamp, Fog lamp, Fan motor, etc. ORDERING INFORMATION TYPES. High Load Relay for Smart Junction Box ACTL.

High Load Relay for Smart Junction Box TL RELAYS High heat-resistant type: Sealed Pin in Paste compliant type: Flux tight New 14.4.7 11.433 1.3 FEATURES Large capacity switching

K12 High Performance Key Switches

High Performance Features/Benefits Typical Applications Excellent tactile feel Automotive Wide choice of LE colors, Off-road transportation travel and actuator forces Industrial electronics High reliability

DC-DC CONVERTERS 2:1 INPUT RANGE, UP TO 2 WATTS MEDICAL APPLICATIONS MTWA2 SERIES

DC-DC CONVERTERS 2:1 INPUT RANGE, UP TO 2 WATTS MEDICAL APPLICATIONS FEATURES 2:1 Wide Input Voltage Range: 4.5-12 Input, 9-18 and 18-36 and 36-75 5000Vac Input to Output 2MOPP Isolation Remote On/Off

CJ2-Z. Cushion. Rubber bumper (Standard) Air cushion

eries ow to Order 1/ /22 J2 ø1, ø ir ylinder Ro lean series 1 ushion Rubber bumper (tandard) ir cushion 1 J 2 L R M9W 21 J 2 L R M9W opper, fluorine and siliconefree + Low particle generation 21 22 Vacuum

Product Information Packet EM3611T 3HP,1760RPM,3PH,60HZ,182T,3632M,TEFC,F1

Product Information Packet EM3611T 3HP,1760RPM,3PH,60HZ,182T,3632M,TEFC,F1 Copyright All product information within this document is subject to ABB Motors and Mechanical Inc. copyright protection, unless

D2D. Door Interlock Power Switch with Minimum Contact gap of 3 mm. Model Number Legend. Contact Form. List of Models. Contact Specifications.

Power/oor Switch oor Interlock Power Switch with Minimum Contact gap of mm Offers the minimum contact gap of mm required for power switches as standard equipment. Safety considerations include a double

TRANSLATION (OR LINEAR)

5) Load Bearing Mechanisms Load bearing mechanisms are the structural backbone of any linear / rotary motion system, and are a critical consideration. This section will introduce most of the more common

Surface Mount Aluminum Electrolytic Capacitors

FETURES YLINRIL V-HIP ONSTRUTION LONG LIFE (7,000 ~ 10,000 HOURS) IE TEMPERTURE RNGE (-25 ~ +105 ) ESIGNE FOR REFLO SOLERING RoHS ompliant includes all homogeneous materials *See Part Number System for

Ordering Information. Text PCB Power Relay G5LE

A Cubic, Single-pole 10-A Power Relay Single-pole 10A 35VDC, 0.8mm contact gap: G5LE-G Single-pole 16A 250VAC: G5LE-E ROHS compliant. Sub-miniature sugar cube relay with universal terminal footprint. Conforms

ches UL File No. E101598

Instrument Transformers, Inc. Series Series 95 95 Swit Switches ches UL File No. E101598 INSTRUMENT AND CONTRC ONTROL OL s Instrument and Control Switch is a heavy-duty rotary switch that satisfies the

MIL Class M Series D*M D*MA connectors and crimp contacts

eatures/enefits *M (Removable crimp contacts technology) : QPL listed 24308 class M onnectors *M (Solder bucket) : QPL listed 24308 class M onnectors *M (90 P) : QPL listed 24308 class M onnec tors Non-Magnetic

Matic TM. Data sheet Sheet No.: Rev. A EL-O-MATIC ACTUATORS WITH ASCO SOLENOID VALVES Date: November /2 NC 5/2

ata sheet Sheet No.:.06. Rev. -O-MTI TUTORS WITH SO SOLNOI VLVS ate: November 009 Selector plate for / - / function lectrical entry Pg 9 8 ir entry G/" Speed control (optional) 7 Speed control (optional)

A - Add New Information C - Change Existing Information D - Delete Information. Page 7. Delete the fourth paragraph beginning CAUTION

ABB Effective: November 1990 This Addendum Supersedes all Previous Addenda Addendum to Instruction Leaflet 41-137.3H Type KRD-4 Directional Overcurrent Ground Relay A - Add New Information C - Change Existing

Series S127B Potentiometer 1/2" (12.7mm) Square

Series S17 Potentiometer 1/" (1.7mm) Square Features: Stackable - up to modules onductive Plastic or ermet Resistance lement Linear, W or audio Taper Metal Shaft and ushing Description: The Series S17

Manual Reset Limit Switch

Manual Reset Limit Switch A Series of Pull-reset Models Available Ideal for elevators (EN81), escalators (EN115), and conveyors. Positive opening mechanism insulation approved by TÜV and BIA. and double

Surface Mount Aluminum Electrolytic Capacitors

FETURES YLINDRIL V-HIP ONSTRUTION FOR SURFE MOUNTING REDUED SIZE VILLE WITH NTI-VIRTION TERMINTIONS (8 & 10mm DIMETER) SUIT FOR HIGH TEMPERTURE REFLOW SOLDERING (UP TO 260 ) 2,000 HOUR LOD LIFE @ +105

34.5 Electric Current: Ohm s Law OHM, OHM ON THE RANGE. Purpose. Required Equipment and Supplies. Discussion. Procedure

Name Period Date CONCEPTUAL PHYSICS Experiment 34.5 Electric : Ohm s Law OHM, OHM ON THE RANGE Thanx to Dean Baird Purpose In this experiment, you will arrange a simple circuit involving a power source

AIT EHMF Collaborative project

AIT EHMF Collaborative project Performance test results for characteristic of Permanent magnet synchronous generator: a. Specification of the machine(pmzg132s-4) being tested: Machine Type : Permanent

ACME SCREW LINEAR ACTUATOR. OVERALL DIMENSIONS La =Lc + Stroke Lc T Capacitor

ACME SCREW LINEAR ACTUATOR ATL 10 AC motor Stroke OVERALL DIMENSIONS La =Lc + Stroke Lc T Capacitor Rear bracket SP Pin Standard head with threaded hollow bore 80 BA depth 17 Stroke end reed switches FCM

^ % 3/2 5/2 SERIES 362/562. Features. Construction. Nominal Ambient Temp. Ranges. Electrical

Pilot Operated Stainless Steel Spool Valves xplosionproof Solenoid Valves 6 Stainless Steel odies /4" NPT / / SRIS 6/6 eatures Ideal for valve automation for the oil and gas market Reliable, robust design

Thermal-magnetic Miniature Circuit Breaker 4230-T...

Thermal-magnetic Miniature Circuit Breaker 420-T... Description Single pole and multipole thermal-magnetic miniature circuit breakers (MCBs) in accordance with EN 60947-2, UL 077 and UL 489 for DIN rail

ABB Automation Inc. Substation Automation and Protection Division Coral Springs, FL 33065

ABB Automation Inc. Substation Automation and Protection Division Coral Springs, FL 33065 Instruction Leaflet Effective: October 1999 Supersedes I.L. 41-133R, Dated August 1998 ( ) Denotes Changed Since

CYLINDERS WITH TIE RODS Ø 25 to 200 mm - double acting CNOMO AFNOR with pneumatic cushioning

CYLIDERS WITH TIE RODS 25 to 200 mm - double acting COO 06-07-02 - AFOR with pneumatic cushioning S Series 437 Type PC GEERAL Detection Equipped for magnetic position detectors Fluid Air or inert gas,

VR61, 3/2, 2 x 3/2, 5/2 or 5/3 Solenoid and pilot actuated spool valves

V6, /, x /, 5/ or 5/ > > ort size: /4 (S /T) > > igh flow rate > > roven sealing system using erion experience in the chemical and process industry > > aintenance-free > > ptional manual overrides > >

General Specifications

Slides Rotaries Programmable Illuminated P Pushbuttons Supplement ccessories Indicators eneral Specifications lectrical apacity Resistive Load: 0 @ 5V, @ 50V, or @ 0V Inductive Load: 5 @ 5V (P.. @.0) Other

Miniature Limit Switches

(Horizontal) Plastic od 49.17.1* oller Lever 49.1.01.03 Miniature Limit witches 49 ealed oller Plunger 49 eries Miniature Limit witches Model election...1 Model Number tructure... Technical Data...3 pecification...4

5.2 to 79 gpm 3000, 3600, 5000 psi

Modular Valve Series Modular Valve Series. to 79 gpm 000, 600, 000 Overview The modular valve is designed and engineered to integrate multiple hydraulic valve operations into a single unit, which eliminates

MHL2. Series 11- ø10, ø16, ø20, ø25. Parallel Type Wide Opening Air Gripper. How to Order. Model/Stroke. Clean series 11 Vacuum suction type

eries ML2 ø, ø, ø, ø, ø, ø Parallel Type Wide pening ir ripper ow to rder lean series Vacuum suction type ML 2 22 ML 2 MN MN Wide opening Number of fingers 2 2 fingers ore size mm mm mm mm mm mm opper,

MAGNETIC PROXIMITY SWITCHES

Bestact MAGNETIC PROXIMITY SWITCHES Vane PSMO Separate PSMS Memory PSMM Column PSMS_RV Omnidirectional Sensor PSMT A Wide Variety of s Available to Meet Applications/Specifications for General Purpose,

B Unit: mm TYPE A B C D E F. How to Order KL 1410 M T R60. SEI Type Dimensions Tolerance Packaging Inductance

DIP Power Inductor KL Scope This specification applies to DIP Power Choke. High power Features Magnetic shielded construction for high density board assembly High performance excellent DC current characteristics

VAL /2, 5/2, 5/3, and 2 x 3/2 Directional control valves. 3-Port and 5-Port Air Pilot Valves

6-6 eries /, /, /, and x / irectional control valves igh flow rate xtensive manual override options Manifold system with easy assembly ow power consumption Maintenance-free echnical data Medium: ompressed

Series CRB2. Rotary Actuator Vane Style. Size: 10, 15, 20, 30, 40 CRB2 CRBU2 CRB1 MSU CRJ CRA1 CRQ2 MSQ MRQ D- 20- Series Variations.

Rotary Actuator Vane Style Series :,,,, 4 1 Series Variations Standard Vane type Port location Rotating angle Shaft type Fluid (S) ouble vane () Side ported (Nil) Axial ported (E) 9 18 27 ouble shaft W

June 2005 CN35 Electrically Held Vol. 2, Ref. No. [0494]

7-2 Lighting ontactors Open ontrol June 2005 N5 lectrically Held Vol. 2, Ref. No. [09] ontents eatures Instructional Leaflets 7 escription Page lectrically Held Product escription....... 7-2 pplication