20 Ton Variable Height Tripod Jack Model 718B
|
|
|
- Juniper Sims
- 5 years ago
- Views:
Transcription
1 The Variable Tripod Jack is a 20 ton capacity single stage hydraulic jack designed primarily for use in aircraft maintenance. It consists of a tripod structure, hydraulic cylinder/reservoir assembly, adjustable hand pump and swivel casters. The jack leg pads are raised off the ground by spring loaded casters. The casters will retract and the pads rest on the ground when a load is applied to the jack. is built to withstand harsh environmental conditions, rugged use and to provide many years of continuous service. Our customers are guaranteed a quality product with each purchase and are assured of our continued product support whenever and wherever the need arises. Standard Features: Manual hand pump with high, medium and low pressure operating positions Heavy duty swivel casters Rain hat (covers jack upper head) Hard chrome plated cylinder bore All unpainted parts are plated to resist corrosion Skydrol resistant paint (safety yellow) Factory proof 150% of rated capacity Three year standard warranty Shipment on domestic skid Optional Features: Air operated hydraulic pump Load Gauge for load indication (reads tons/psig) Tow Handle for ease of towing Leg Kit 1-54" Low Leg Kit 2-70" Low Leg Kit 3-93" Low Ladder/platform Kit (requires leg kit 3) Export crating Customer specified paint color
2
3 Specifications: Rated Capacity tons (18.1 m. tons) Side Load... 15% of vertical load Roll Under... add 1 inch (25mm) to low heights Low Leg Kit inches (1372 mm) Low Leg Kit inches (1778 mm) Low Leg Kit inches (2362 mm) Hydraulic Lift inches (1016 mm) Extension Screw inches (254 mm) Total Extended Leg Kit inches (2642 mm) Total Extended Leg Kit inches (3048 mm) Total Extended Leg Kit inches (3632 mm) Oil Pressure at Rated Capacity psig (197 kg/sq cm) Safety Pop-off Valve set at: tons (20.0 m. tons) Proof Load tons (27.2 m. tons) Reservoir Capacity gallons (11.0 liters) Hydraulic Fluid... MIL-PRF-5606 or equivalent Maximum Towing Speed... 5 mph (8 km/h) Approximate Jack Net lbs (340 kg) Typical Aircraft Applications: Jack Configuration Forward Fuselage Wing Aft Fuselage 718B with Leg Kit 1 B707, B720, B737, BAE146, C SERIES, DC8, RRJ95, SSJ , ARJ21, BAE146, F28, GLOBAL EXPRESS, RJ170/175 BAE146, B727, MD80, MD90 718B with Leg Kit 2 B727 RJ190/195 RJ170/ B with Leg Kit 3 F27, F50, RRJ95, SSJ100 B737, RJ190/195
4 Optional Equipment Codes: (Specify with order) AP: Air Operated Hydraulic Pump GA: Load Gauge TH: Tow Handle *54LK: 54 Jack Low Leg Kit *70LK: 70 Jack Low Leg Kit *93LK: 93 Jack Low Leg Kit LA: Ladder/platform Kit (requires 93LK) SPC: Special Paint Color (yellow is standard) 718BPK: Repair Kit *Order must specify either 54LK, 70LK or 93LK. s & Options: (Specify with order) -: Domestic Skid Jack Set-up KD: Domestic Skid Jack Knocked Down (Additional Cost for 54 and 70 Low Only) LKD: Domestic Skid Jack & Ladder/platform Kit Knocked Down EC: Export Crate Jack Set-up (Additional Cost) ECKD: Export Crate Jack Knocked Down (Additional Cost) ECLKD: Export Crate Jack & Ladder/platform Kit Knocked Down (Additional Cost) 718B 54 Low Shipping Data: NOTE: Unless otherwise specified, Jack is shipped on a wood skid in the set-up condition (1651) 56 (1422) 61 (1549) 950 (431) KD 68 (1727) 40 (1016) 28 (711) 950 (431) EC 67 (1702) 61 (1549) 64 (1626) 1200 (544) ECKD 70 (1778) 45 (1143) 31 (787) 1100 (499)
5 718B 70 Low Shipping Data: NOTE: Unless otherwise specified, Jack is shipped on a wood skid in the set-up condition (1956) 67 (1702) 77 (1956) 1000 (454) KD 80 (2032) 40 (1016) 28 (711) 1000 (454) EC 79 (2007) 72 (1829) 80 (2032) 1250 (567) ECKD 82 (2083) 45 (1143) 31 (787) 1150 (522) 718B 93 Low Shipping Data: NOTE: Unless otherwise specified, Jack is shipped on a wood skid in the knocked down condition. KD 104 (2642) 40 (1016) 28 (711) 1025 (465) LKD 104 (2642) 40 (1016) 60 (1524) 1100 (499) ECKD 106 (2692) 45 (1143) 31 (787) 1150 (522) ECLKD 106 (2692) 45 (1143) 63 (1600) 1275 (578)
15 Ton Fixed Height Shoring Jack Model 706A
The Malabar Fixed Height Shoring Jack is an 18 ton capacity single stage hydraulic jack designed primarily for use in aircraft maintenance. The jack features a spring centered cylinder assembly that pivots
120 Ton Tripod Jack Model 8811B
The Tripod Jack is a 120 ton capacity single stage hydraulic jack designed for use in aircraft maintenance. It consists of a tripod structure, hydraulic cylinder assembly, reservoir, valve block assembly,
Property of American Airlines
Date: September, 00 MALABAR INTERNATIONAL AIRCRAFT MAINTENANCE & SUPPORT EQUIPMENT READ AND SAVE THIS INSTRUCTION MANUAL OWNER'S MANUAL FOR MALABAR MODEL A SINGLE STAGE VARIABLE HEIGHT HYDRO - MECHANICAL
Property of American Airlines
Date: November 22, 1999 MALABAR INTERNATIONAL AIRCRAFT MAINTENANCE & SUPPORT EQUIPMENT READ AND SAVE THIS INSTRUCTION MANUAL OWNER'S MANUAL FOR MALABAR MODEL 60P10 TWO STAGE HYDRAULIC AVIATION FLOATING
Operation & Service Manual
Operation & Service Manual Model: 02-1248-0112 12 Ton Single Stage Jack 11/2004 Rev. 02 Includes Illustrated Parts Lists 1740 Eber Rd Tronair, Inc. Phone: (419) 866-6301 Holland, OH 43528-9794 www.tronair.com
JACKS & LIFTS JACKS & LIFTS BOTTLE JACKS JACK STANDS JACKS & LIFTS JACK PACKS JACKS & LIFTS UNDER HOIST STANDS. Bottle Jacks - Stands
BOTTLE JACKS TEQ Correct Professional 12 Ton Short Professional Bottle Jack EQP 3113 JACK STANDS Low Height: 12 3/16" Raised Height: 18 7/8" TEQ Correct Professional 3 Ton Ratcheting Professional Series
Tronair, Inc. Phone: (419) Air Cargo Pkwy East Web:
This product can not be modified without the written approval of Tronair, Inc. Any modifications done without written approval voids all warranties and releases Tronair, Inc., it suppliers, distributors,
S0300-BV-CAT-020 TANKER OFFLOAD SYS (NON IO) System - P /14/2018 2:47:14 AM
Page 1 NOT ON INVENTORY OBJECTIVE PIODISP The Tanker Offload System P17100 consists of a Mod 6 hydraulic power unit with a machinery containment pool, a spare part kit for the hydraulic power unit, two
SUPER DUTY, INDEPENDENT DUAL SYSTEM HYDRAULIC POWER UNIT / DIESEL POWERED
SUPER DUTY, INDEPENDENT DUAL SYSTEM HYDRAULIC POWER UNIT / DIESEL POWERED Designed to Meet or Exceed Standards Set By National Stock Number Specifications 2 Year Warranty Model 05-514-03 Electric Motor
ADDENDUM NO. 1 FOR SPECIFICATION NO.: RFQ NO.: 3358 FOR DIESEL-POWERED SALT CONVEYOR
ADDENDUM NO. 1 FOR SPECIFICATION NO.: 77818 RFQ NO.: 3358 FOR DIESEL-POWERED SALT CONVEYOR For which bids were scheduled to open in the Bid and Bond Room, City Hall, 121 North La Salle Street, Room 301,
Property of American Airlines
MAINTENANCE LIFT Specifications/Shipping/Storage Manufactured by TISl:D TE co EQUIPMENT LLC Coral Springs, Florida Section 3: Specifications 1. DIMENSIONS & WEIGHT Length 398 in (10.11 m) Width 103 in
Deluxe All-In-One Welded Steel Commode with Plastic Armrests. Folding Aluminum Commode with Padded Armrests LIGHTWEIGHT! B A TOOL FREE ASSEMBLY
ENVIRONMENT FRIENDLY PRODUCT 114 Recycled materials were used to make this product. Deluxe All-In-One Welded Steel Commode with Plastic Armrests 11105N-4 11129 10389G-8 Assembled, (Deeper seat depth),
Section Ton Ram. Specifications
50 Ton Ram Specifications Dixon Valve & Coupling Company 800 High Street Chestertown, MD 0 ph: 800 355 99 fax: 800 83 49 www.dixonvalve.com Item Part No. 50T003 50T04 00-0008 50T0 50T09 50T00 50T0 50T00
Atlas Copco Blasthole Drills DM-M3
Atlas Copco Blasthole Drills DM-M3 It all starts with the blasthole... and the blasthole starts with the DM-M3 power and performance. A unique patented feed system: Longer head travel with smaller cylinder
Color Options Red Black Yellow Blue 450 Series Standard Made To Order Made To Order Made To Order
Industrial professionals demand tool boxes with high durability and maximum capacity. the Stanley Proto Professional Tool Box Line meets these requirements. The broad line of Proto tool boxes utilize heavy
Model: TON AXLE JACK. March 1999 Rev.-02
Model: 02-7832-0100 March 1999 Rev.-02 TABLE OF CONTENTS PAGE 1.0 DESCRIPTION1 2.0 USAGE... 1 3.0 SPECIFICATIONS... 1 4.0 ASSEMBLY INSTRUCTIONS... 1 4.1 General Information... 1 4.2 Pre-Use Checks... 1
OPERATION & SERVICE MANUAL
OPERATION & SERVICE MANUAL Models: 06-5020 Series 08/2009 - Rev. 12 Tronair, Inc. Phone: (419) 866-6301 800-426-6301 1 Air Cargo Pkwy East Web: www.tronair.com Swanton, OH 43558 Email: sales@tronair.com
3500-LB. TRAILER JACK OWNER S MANUAL
3500-LB. TRAILER JACK OWNER S MANUAL WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious
TF45/60 by LIFT SYSTEMS, INC.
by LIFT SYSTEMS, INC. Global Leaders in Specialized Lifting Equipment! GENERAL SPECIFICATIONS ENGINE: GM 3.0L, 4 cylinder, 75 hp (56 Kw) propane engine PUMP: Sundstrand 40 series drive pump CONTROL SYSTEM:
2007 Pontiac G BRAKES Disc Brakes - G6
REAR DISC BRAKE PADS REPLACEMENT Removal Procedure CAUTION: Refer to Brake Dust Caution. 1. Inspect the fluid level in the brake master cylinder reservoir. 2. If the brake fluid level is midway between
Designer Series. Blanket Warming Cabinet.
Designer Series Blanket Warming Cabinet DC150 (shown with optional timer) DC250 DC350 DC750 (shown with optional timer) Energy-efficient WarmSafe heating system monitors interior surface temperatures and
Our Top Selling Jacks!
Ultra-Fab Tongue Jacks 7 WAY PLUG ZERK FITTING 3,500 Lb LIFT CAPACITY Ultra 3502 6" diameter footpad prevents sinking 18" of travel Die-cast aluminum cap Hardened steel gears Fits 2" and 2.25" mounting
C I R R U S HOISTING DESCRIPTION
HOISTING 1. DESCRIPTION This chapter describes those instructions necessary to support the airplane during maintenance and repair. In some instances (i.e. off-runway landing, collapsed gear, etc.) it may
B250 Push Back Tractor DESCRIPTION & SPECIFICATION
DESCRIPTION & SPECIFICATION 1. GENERAL DESCRIPTION o GENERAL The B250 Aircraft Push Back Tractor is a low profile, heavy duty, diesel powered, four wheel drive (4WD) tractor designed for aircraft push
BOEING B737 EQUIPMENT CATALOGUE
BOEING B737 EQUIPMENT CATALOGUE Dear Madam or Sir, One of the key success factors of managing a medium sized Group like HYDRO has always been the direct involvement and accessibility of top management
Gantry Cranes. The Caldwell Group Model K90 - Adjustable Height & Span Gantry H Master Catalog
Model K0 - Adjustable Height & Span Gantry OVERALL LENGTH (B) NOMINAL SPAN HOIST/TROLLEY HEADROOM SEE PAGES H.36 - H.3 INSIDE SPAN (A) PRODUCT FEATURES: Adjustable span standard on - spans through 5 ton.
SPECIFICATIONS CENTURY MODEL 925 HYDRAULIC WRECKER
SPECIFICATIONS CENTURY MODEL 925 HYDRAULIC WRECKER 1.0 GENERAL DESCRIPTION The wrecker shall consist of a recovery boom, wrecker frame, modular type body, and a subframe for mounting to chassis. 1.1 The
INSTALLATION INSTRUCTIONS SKID STEP and Utility Handles FOR MDHI 369D, 369E, 369FF, & 500N
INSTALLATION INSTRUCTIONS SKID STEP and Utility Handles FOR MDHI 369D, 369E, 369FF, & 500N AEROCRAFT INC. 4420 COMMODITY WAY, UNIT B SHINGLE SPRINGS, CA 95682 LOG OF REVISIONS REVISION DATE PAGES EFFECTED
Batteries, Cables, and Receptacle
Batteries, Cables, and Receptacle ZGS-10056-1 Battery 12V (Main) 8A31DT 6140-01-629-2973 1 3-4 Weeks ZGS-10078-1/2 Battery Box with Lid Not available 1 2-3 Weeks ZGS-10311-1 Main Negative Wire Assembly
Industrial Pumping Equipment PowerMaster III
PowerMaster III Features State-of-the-art, fully pneumatic air motors, 3, 4, 6, 8 inches (76, 101, 152, 203 mm) diameter. Full six-inch stroke for greater output per cycle. Modular design for easy repair.
SECTION 2 ELECTRIC HEIGHT ADJUSTABLE FRAMES & ACCESSORIES
SECTION 2 ELECTRIC HEIGHT ADJUSTABLE FRAMES & ACCESSORIES single pedestal electric height adjustable desk frame SERIES 5017 FEATURES High quality motor for quiet and reliable movement Mobile workstation
Hydraulic Light Tower with Diesel Engine Generator - 4X1250 Watt Metal Halide Lamps
Hydraulic Light Tower with Diesel Engine Generator - 4X1250 Watt Metal Halide Lamps Part #: WCDE-4-MLK Page: 1 Made in the USA The WCDE-4-MLK from Larson Electronics is a metal halide floodlight tower
HD-Series. Shop Equipment
HD-Series Shop Equipment Reaching new heights Winntec (Est. 2002) is a manufacturer, esteemed developer and international supplier of high quality, efficient and reliable automotive workshop essentials,
Heavy Duty Mobile Metrology Stands. Manual for Models 230, 231, 232, and 233 Series. Part No Rev NR
Heavy Duty Mobile Metrology Stands Manual for Models 230, 231, 232, and 233 Series Part No. 19399 Rev NR Heavy Duty Mobile Metrology Stands Manual for Models 230, 231, 232, and 233 Series Brunson Instrument
STABILIZER STABILIZER CYLINDERS
STABILIZER RAM Mechanical Locking Stabilizer cylinders replace manual systems used to position equipment at a desired location and height. Traditional methods to secure equipment are the use of crank type
AUTOMOTIVE TOOLS & EQUIPMENT
AUTOMOTIVE TOOLS & EQUIPMENT Distributed By: TRADE-LOGIX PO BOX 1450 WATERDOWN, ON LOR 2HO www.trade-logix.com Email: sales@trade-logix.com Tel: (905) 581-2292 TABLE OF CONTENTS CREEPERS & SEATS Page 2
STEP STOOLS, STANDS & LADDERS
STEP STOOLS, STANDS & LADDERS STEP STOOLS KIK-STEP Extra heavy-duty steel Comes with a double platform with non-slip rubber tread Spring-loaded casters retract under slight pressure, forcing base to the
CONTENTS ONE YEAR LIMITED WARRANTY
CONTENTS SIDE PUMP BOTTLE JACKS 3 AIR ACTUATED BOTTLE JACKS 4 FAST LIFT SERVICE JACKS 5 SERVICE JACK 5 LOW PROFILE FAST LIFT SERVICE JACK 6 3 TON FAST LIFT SERVICE JACK AND 3 TON JACK STANDS 6 COMBO AIR
AP 142E Expandable $
APEX SPREADING MACHINE PRICE LIST January 1, 2017 AP 142E Expandable 48 78 $ 1365.00 ¾ solid cloth bar 3 support tubes across machine 3 support tubes across drop off arm Edge control utilizing Thomson
HOBART Mobile diesel-driven 60 & 90 kva GPU Cummins QSB4.5 diesel engine ITW GSE Generator TIER 3 / EU STAGE 3A. It s all about connections
HOBART 4400 Mobile diesel-driven 60 & 90 kva GPU Cummins QSB4.5 diesel engine ITW GSE Generator TIER 3 / EU STAGE 3A HOBART is part of ITW GSE the world s leading supplier of Ground Support Equipment It
BB6000 Work Sheet. Tool head. assembly. (boring head. shown) Axial feed unit Tool carrier. Hydraulic motor
BB6000 Work Sheet Bearing support (three-arm end mount shown) Tool head (boring head shown) Boring bar/ leadscrew Torque arm Rotational drive unit Axial feed unit Tool carrier Bearing support (four-arm
HIGH PRESSURE HYDRAULICS PUMPS CYLINDERS JACKS
HIGH PRESSURE HYDRAULICS PUMPS CYLINDERS JACKS Since 2001, PowerX International, LLC has been collaborating with its customers to design and supply hydraulic products and systems. Specializing in mobile
LMS 106 CR MODEL MOBILE TOWER
LMS 106 CR MODEL MOBILE TOWER 106 TALL, 6 EA SECTIONS LEGS ASTM A500-07, A53-12, GRADE B, US CARBON STEEL Lifetime Warranty TILT BASE ASSEMBLY INTEGRATED INTO TRAILER. Lifetime Warranty 3 SECTOR ANTENNA
HEAVY DUTY SHELF TRUCKS
HEAVY DUTY TRUCKS RUGGED, MULTI-USE TRUCKS FOR THE SHOP, FACTORY, WAREHOUSE OR SHIPPING ROOM COMPLETE LINE MECO OMAHA manufactures a complete line of shelf trucks, platform trucks and service carts to
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS WARNING: NEVER EXCEED YOUR VEHICLE MANUFACTURER'S RECOMMENDED TOWING CAPACITY Q24 5TH WHEEL HITCH TABLE OF CONTENTS Page# Description 1 Warnings & Precautions 2 Assembly & Installation
High-Rise Tire Dolly
High-Rise Tire Dolly Assembly & Operation Instructions Model 70131 Capacity 1000 lb SAVE THESE INSTRUCTIONS. For your safety and the safety of others around you, read carefully before attempting to install,
6090 FS. Hydraulic Shovel. General Data. Operating Weight. Features
6090 FS Hydraulic We understand the challenges you face, the importance of reliability, and the relationship between uptime and productivity. That s why we continually strive to produce the safest, most
STOPEMASTER SERIES Rock Drill and Blast Rig Technical Overview
STOPEMASTER SERIES Rock Drill and Blast Rig Technical Overview Copyright 2011. All rights reserved. Copyright 2011. All rights reserved. For more information on the Stopemaster scan with a QR code reader
Model PM 50/20 Intensifier Press. Operation & Maintenance Instructions
Model PM 50/20 Intensifier Press Operation & Maintenance Instructions Revised 07/09/2007 1 1. CHARACTERISTICS Models PM 50/20 Intensifier Press Operation & Maintenance Instructions Approach - Power with
1/2 Ton - 2 Stage Transmission Jack
1/2 Ton - 2 Stage Transmission Jack 34032 ASSEMBLY AND OPERATING INSTRUCTIONS Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly
301.5, 301.6, Mini Hydraulic Excavator
301.5, 301.6, 301.8 Mini Hydraulic Excavator 301.5 301.6 301.8 Cat 3003 Naturally Aspirated Diesel Engine Flywheel Power 13 kw 17.4 hp 13 kw 17.4 hp 13 kw 17.4 hp Operating Weight With canopy 1616 kg 3563
42 DUTRO HAND TRUCKS EQUIPMENT RENTAL EQUIPMENT MOVING FURNITURE PADS WAREHOUSE EQUIPMENT APPLIANCE DOLLIES TRUCKS HAND EQUIPMENT VAN CONTROL CARGO
42 DUTRO S C D S M O V I N G DUTRO 3-WAY CONVERTIBLE The multi-purpose hand truck. Converts to a platform truck or a tripod truck instantly. Fold out tube-steel nose extension assists with balancing large
Farm Bin Jacks. 8,000 Lb - Single Sheet
Farm Bin Jacks 8,000 Lb - Single Sheet The FJ44-8000 farm bin jack has an 8,000 pound lifting capacity and features a one stroke lifting motion. The bin can be raised to the proper height without stopping
Pneumatic crawler drill
27 / 28 Pneumatic crawler drill CRAWLER ASSEMBLY The crawler uses parts designed and time tested by Furukawa. These include the track-link crawler chains and track rollers. The ruggedly constructed crawler
PTM C130 Portable Tower
PTM C130 Portable Tower Description The PTM C130 tower system combines the features of our PTM-100 tower with a multi-function trailer transport system offering different deployment modes. The system can
SERVICE BULLETIN REVISION
Revision 7 REVISION TRANSMITTAL SHEET This sheet transmits Revision 7 to Service Bulletin. A. Replaces the AN960PD10L Washers with NAS1149D0316K Washers. B. Removes the optional Aviation Brake System antiskid
Service Jack. Form No Parts List & Operating Instructions 1510B. Max. Capacity: 5 and 10 Tons. 1 of 3. Sheet No. Issue Date: Rev.
SPX Corporation 655 Eisenhower Drive Owatonna, MN 55060-0995 USA Phone: (507) 455-7000 Tech. Serv.: (800) 533-6127 Fax: (800) 955-8329 Order Entry: (800) 533-6127 Fax: (800) 283-8665 International Sales:
JACKS AND HYDRAULICS
JACKS AND HYDRAULICS Floor s and Stands 2 Ton Floor SKU 964622 HEIHW93642 Min. Height: 4-1/2 Max. Height: 20-1/4 404 3 Ton Ratcheting Stand Set SKU 964601 94 HEIHW93503 Max. Height: 19 Ratchet Action Height
Chapter 12 SERVICING
Chapter 12 SERVICING 12-Title Page 1 January 23, 2012 INTENTIONALLY LEFT BLANK 12-Title Page 2 January 23, 2012 LIST OF EFFECTIVE PAGES Chapter Section Page No. Date 12 12-Title 1 January 23, 2012 2 January
High Lift Transmission Jack Max. Capacity: kg (1,000 lbs.)
655 EISENHOWER DRIVE OWATONNA, MN 55060-0995 USA PHONE: (507) 455-7000 TECH. SERV.: (800) 533-6127 FAX: (800) 955-8329 ORDER ENTRY: (800) 533-6127 FAX: (800) 283-8665 INTERNATIONAL SALES: (507) 455-7223
FIT TO FINISH FIELD CULTIVATOR
FIT TO FINISH FIELD CULTIVATOR TILLAGE PRODUCTS PENTA PROVEN PERFORMANCE Effective tillage matters. Whether you re warming up a seedbed, mulching tough trash, managing compaction, or minimizing erosion
Aviation Ground Fueling Solutions
Aviation Ground Fueling Solutions for Commercial and Military Applications Fueling/Refueling Nozzles & Accessories Military Underwing Refueling Nozzles For pressurized underwing or fuselage refueling of
TF45/60 (metric) by LIFT SYSTEMS, INC. Global Leaders in Specialized. Lifting Equipment! Courtesy of Crane.Market
(metric) by LIFT SYSTEMS, INC. Global Leaders in Specialized Lifting Equipment! GENERAL SPECIFICATIONS STANDARD EQUIPMENT ENGINE: FORKS: GM 3.0L, 4 cylinder, 56 Kw (75 hp) propane engine PUMP: 2,438mm
6FBRE FBRE16.20
12.14 16.20 MIN VEHICLE SPECIFICTIONS 16 1 Manufacturer TOYOT TOYOT TOYOT TOYOT 2 12 14 16 20 (lb) (260) 10 (2980) (0) 4 Center 600 (24) 600 (24) 600 (24) 600 (24) Power 6 Operator Position Rider Seated
AIRBUS A350 EQUIPMENT CATALOGUE
AIRBUS A350 EQUIPMENT CATALOGUE A350 900 / 1000 Dear Madam or Sir, One of the key success factors of managing a medium sized Group like HYDRO has always been the direct involvement and accessibility of
SPECIFICATIONS FOR A SINGLE-COLOR, SINGLE LINE ROADWAY PAINT MARKING MACHINE. HEAVY DUTY MODEL C Part Number: PO-HDC
SPECIFICATIONS FOR A SINGLE-COLOR, SINGLE LINE ROADWAY PAINT MARKING MACHINE HEAVY DUTY MODEL C Part Number: GENERAL These specifications are to cover the minimum specifications of a single line, single
Racing Jack Max. Capacity: 3,000 lbs. (1,361 kg)
R SPX Corporation 655 Eisenhower Drive Owatonna, MN 55060-0995 USA Phone: (507) 455-7000 Tech. Serv.: (800) 533-6127 Fax: (800) 955-8329 Order Entry: (800) 533-6127 Fax: (800) 283-8665 International Sales:
Specification Trailer, Flatbed, 6-Ton, MTS MI048Al NSN
Specification Trailer, Flatbed, 6-Ton, MTS MI048Al NSN 2330-01-406-2090 The Specification contained herein establishes the performance, design and production for the M1048Al Trailer, hereafter referred
CIRRUS AIRPLANE MAINTENANCE MANUAL
JACKING 1. DESCRIPTION Three jack points, located at each wing tiedown and tail tiedown, are provided to perform maintenance operations. Tie-down rings must be removed and replaced with jack points prior
Q20 5th wheel hitch WARNINGS. warning: never exceed your vehicle manufacturer's recommended towing capacity
Installation instructions warning: never exceed your vehicle manufacturer's recommended towing capacity Q20 5th wheel hitch Table of contents Page# Description 1 Warnings & Precautions 2 Assembly & Installation
SR22 Airplane Flight Manual (AFM) Temporary Change
Cirrus Design TPOH AFM Temporary Change Airplane Flight Manual (AFM) Temporary Change Information in this Temporary Change adds to, supersedes, or deletes information in the basic Pilot s Operating Handbook.
308E. Mini Hydraulic Excavator
308E Mini Hydraulic Excavator Engine Weights Engine Model Cat C3.3 DI Turbo Operating Weight Standard Stick 7160 kg Net Power @ 2,400 rpm 46.8 kw Operating Weight Long Stick 7190 kg Gross Power @ 2,000
Model Part No Description Packaging. For: AS350, A119*, B206B, B206L*, B407*, EC120, EC130, EC135, EC145*, BK117*,MD500(without pod), MD600
Carriers Model Part No Description Packaging Catalogue Underlined = Ideal for * = Marginal V1020 156 0002 00 A Application: For up to 4500lbs (2000kg) With pneumatic support wheels For: AS350, B206B, B206L*,
Firewood Processor Operator s Manual SSA400Z
Distribution Limited Firewood Processor Operator s Manual SSA400Z FOR YOUR SAFETY READ AND UNDERSTAND THE ENTIRE MANUAL BEFORE OPERATING THIS MACHINE Warranty Registration Form Model: Serial Number: Type
SPECIFICATIONS MANUAL
SUBJECT TO CHANGE FOR PRODUCT IMPROVEMENT TATA DAEWOO HEAVY DUTY TRUCK SPECIFICATIONS MANUAL MODEL NAME : 4x2 Wing body Truck MODEL CODE : June, 2014. GENERAL DIAGRAM DIMENSIONS (mm) Overall Length OL
Parallelogram Commercial Truck and Transit
Parallelogram Commercial Truck and Transit Parallelogram Lift Industry Leader The parallelogram lift system is convenient for facilities and technicians. The lift is not underground and has no EPA concerns.
5.2 Terminal Operations - Turnaround Station. 5.3 Terminal Operations - En Route Station. 5.4 Ground Servicing Connections
5.0 TERMINAL SERVICING 5.1 Airplane Servicing Arrangement Typical Turnaround 5.2 Terminal Operations Turnaround Station 5.3 Terminal Operations En Route Station 5.4 Ground Servicing Connections 5.5 Engine
2018 FULL LINE CATALOG
2018 FULL LINE CATALOG AMERICAN MADE QUALITY INVERTED SKIDSTEER SPLITTERS Heavy duty design and easy to use. Pick up those big logs, split & load them without breaking a sweat! Features: 8 reinforced H
737 Jackscrew Maintenance Ladder Training, Operations & Parts Manual Maintenance Schedule
737 Jackscrew Maintenance Ladder Training, Operations & Parts Manual Maintenance Schedule Keith Consolidated Industries www.kcigse.com 541-830-8678 1718 Antelope Rd. White City, OR 97502 Table of Contents
LMS 120 XHD MODEL MOBILE TOWER
LMS 120 XHD MODEL MOBILE TOWER MOBILE TOWER 120 TALL, 6 EA SECTION LEGS ASTM A500-07, A53-12, GRADE B, US CARBON STEEL Lifetime Warranty TILT BASE ASSEMBLY INTEGRATED INTO TRAILER. Lifetime Warranty 3
6018/6018 FS. Cat. Hydraulic Shovel. Specifications. General Data Operating weight. Operating Weight Shovel
Cat 6018/6018 FS Hydraulic Shovel Specifications General Data Operating weight Face Shovel Backhoe 177 tonnes 19 tons 181 tonnes 200 tons Engine output SAE J 199 Cat C18 88 kw 1,10 HP Standard bucket capacity
30 TONNE MOBILIFT by LIFT SYSTEMS, INC.
MOBILIFT by LIFT SYSTEMS, INC. Global Leaders in Specialized Lifting Equipment! ENGINE: GM 3.0L, 4 cylinder, 56 Kw (75 hp) propane engine PUMP: Sundstrand 40 series drive pump CONTROL SYSTEM: CARL (Computer
C13 / C15 / C18 SOUND ATTENUATED ENCLOSURES
/ / SOUND ATTENUATED ENCLOSURES US Sourced Diesel Generator Set - 750 60 Hz Image shown may not reflect actual configuration Features Robust / Highly Corrosion Resistant Construction Factory installed
Material Handling & Industrial Storage Solutions
Standard Product Catalog Material Handling & Industrial Storage Solutions GILLIS LADDERS Ladders SPG brings greater organization to your organization with material handling systems from Gillis-Jarke. Today,
L 16 / 24. Marine Diesel Engine. Main Specification. Engine Type rpm 1,000 1,200
L 16 / 4 L 16 / 4 rpm 1,000 1,00 Bore mm 160 Stroke mm 40 Stroke/Bore ratio 1.5 : 1 cm 01 Swept volume per Cyl. liter 4.8 Compression ratio 15. : 1 Mean effective pressure bar.4 0.7 Max. combustion pressure
C13/C15/C18 Sound Attenuated Enclosures. Features. Enclosures. U.S. Sourced Diesel Generator Set kw 60 Hz
// Sound Attenuated Enclosures U.S. Sourced Diesel Generator Set - kw 60 Hz Image shown may not reflect actual configuration Features Robust/Highly Corrosion Resistant Construction Factory installed on
INCORPORA:1EO. PO Box Shannon Lane Priest River, FAA APPROVED
INCORPORA:1EO FAA APPROVED Document A-1 0023.., Page 1 of. 9 Rev, (see rev. page) SUPPLEMENTAL AIRPLANE FLIGHT MANUAL FOR CESSNA 180J & 180K SERIES FLOATPLANES Modified with Kenmore Air Harbor STC # SA649NW
STOPEMASTER SERIES HX Rock Drill and Blast Rig Technical Overview
STOPEMASTER SERIES HX Rock Drill and Blast Rig Technical Overview For more information on the Stopemaster scan with a QR code reader on your smart phone. PRODUCTIVITY THROUGH SAFE, RELIABLE AND TRUSTED
Draft Commander 3000 Mobile Fire Pump Testing & Training Specifications Municipal/County/Rural/Commercial/Industrial
Draft Commander 3000 Mobile Fire Pump Testing & Training Specifications Municipal/County/Rural/Commercial/Industrial MODEL NUMBER DC1911-3000 AT/AL/MC Draft Commander 3000 Specifications MODEL NUMBER DC1911-3000
Q5 5 th Wheel. Unpacking Assembly / Installation
PA1 Unpacking Assembly / Installation Installer: Read and understand this manual. Fully instruct and demonstrate the operation of this 5 th Wheel Hitch to the End-User. Include the importance of observing
SPECIFICATIONS FOR A SINGLE-COLOR, SINGLE LINE ROADWAY PAINT MARKING MACHINE
SPECIFICATIONS FOR A SINGLE-COLOR, SINGLE LINE ROADWAY PAINT MARKING MACHINE HEAVY DUTY MODEL C Stainless Steel Tank, Non-Bleeder/Flush Part Number: GENERAL These specifications are to cover the minimum
SERVICE INSTRUCTIONS D TON
1120 SOUTH CRYSTAL AVE * BENTON HARBOR MI PH: 269-925-7777 FAX: 269-925-6656 SERVICE INSTRUCTIONS D-51223 4 TON TO ASSEMBLE: 1. Check the handle set screw for tightness. CUSTOMER PRE-USE INSTRUCTIONS THE
ENCLOSURES. WEATHER PROTECTIVE and SOUND ATTENUATED. three levels of sound attenuation. D40-6 to D200-2 D40-6s to D100-6S.
WEATHER PROTECTIVE and SOUND ATTENUATED ENCLOSURES three levels of sound attenuation D-6 to D200-2 D-6s to D100-6S Picture shown may not represent actual package. Features HIGHLY CORROSION RESISTANT CONSTRUCTION
Aeroquip 145/155 Series Hydraulic Self Sealing Coupling
Aeroquip 145/155 Series Hydraulic Self Sealing Coupling Fully interchangeable with all fielded Eaton's Aeroquip 145/155 Series Couplings and is the only approved coupling to SAE AS5440 Table of Contents
SPECIFICATIONS FOR A HEAVY DUTY C W/ TRACTION
SPECIFICATIONS FOR A HEAVY DUTY C W/ TRACTION Stainless Steel Tank, Non-Bleeder/Flush Part Number: PO- (air actuated traction drive) Part Number: PO-Hydro-SS (hydrostatic wheel drive) GENERAL These specifications
Power Rating Minimum Rating 116 bkw 156 bhp Maximum Rating 205 bkw 275 bhp. 105 mm (4.1 in) 135 mm (5.3 in)
Cat C7.1 ACERT Power Unit The C7.1 ACERT Power Unit is a complete power package containing a radiator, flywheel, alternator and alternator wiring, completely pre-assembled for fast, straightforward installation
PLASTIC BIN SUPPORT RACKS
PLASTIC BIN SUPPORT RACKS Louvered bin panels can be wall-mounted, attached to back of shelving, mounted on benches, carts, inside cabinets, fastened to slotted angle components or used for service truck
Operation & Service Manual
Operation & Service Manual Model: 5010 Hydraulic Power Unit 05/2004 - Rev. 01 Includes Illustrated Parts Lists 1740 Eber Rd Tronair, Inc. Phone: (419) 866-6301 Holland, OH 43528-9794 www.tronair.com 800-426-6301
Low Lift Transmission Jack
655 Eisenhower Drive Owatonna, MN 55060 USA Phone: (507) 455-7000 Tech. Serv.: (800) 533-6127 Fax: (800) 955-8329 Order Entry: (800) 533-6127 Fax: (800) 283-8665 International Sales: (507) 455-7223 Fax:
Product Catalogue GROUND SUPPORT.
Product Catalogue GROUND SUPPORT www.metadure.com www.metadure.com ABOUT US Metadure Parts & Sales Inc. has been a trusted supplier to the US Dept. of Defense for more than 65 years with its specialized