Firewood Processor Operator s Manual SSA400Z
|
|
- Joel Golden
- 5 years ago
- Views:
Transcription
1 Distribution Limited Firewood Processor Operator s Manual SSA400Z FOR YOUR SAFETY READ AND UNDERSTAND THE ENTIRE MANUAL BEFORE OPERATING THIS MACHINE
2
3 Warranty Registration Form Model: Serial Number: Type of Use: Name: Business Name: Address: Address: Phone Number: Date of Purchase: Place of Purchase: Proof of Purchase enclosed: Business / Domestic For the warranty to be valid the Warranty Registration Form must be completed and returned to Lumag Distribution Limited within 14 days of the purchase, together with a copy of the purchase invoice. We will use your to confirm that we have received the completed Warranty Registration Form and contact you about any errors or omissions on the form. We may occasionally use this address to make you aware of news, technical advice and special offers. If you do not wish to receive such s please tick this box. Unit 10, Hatchmoor Industrial Estate, Hatherleigh, Okehampton, Devon EX20 3LP Lumag Distribution Limited Company Number: VAT Number: GB Hatherleigh Plant and Tool Hire is a trading name of Lumag Distribution LTD
4
5 Lumag Servicing and Maintenance Schedules To maximise the life of your Lumag machine it needs to be serviced and maintained at every indicated month or operating hour interval, whichever comes first, in accordance with the below Schedules. Please note that failure to service your machine on schedule or use genuine Lumag parts and consumables will result in your warranty being void. Engine Service & Maintenance Schedule Hydraulic Oil 25litres Lumag Hyd 1 Machine Service & Maintenance Schedule Item Checks/Work Each Use Weekly 20hrs (1st Month) Hydraulic Oil Check Level X Change and Filter Change Fasteners Tension Check X Clean Machine Clean X All Other Moving Parts & Cables 50hrs (2nd Month) 100hrs (6th Month) 300hrs (Yearly) X (1) (2) X (2) Lubricate X X (2) 1 First service only, 2 = Should be carried out by your Lumag Dealer, 3 = May need to be done more often in dusty areas & 4 = Replace paper element only
6 Service & Maintenance Record Product Details: Model: Serial number: Purchase Date: Date: Description of checks/work carried out: Parts Used? Y/N Please note that failure to service your machine on schedule or use genuine Lumag parts and consumables will result in your warranty being void Parts Invoice Number: Dealers Name: Engineers Name: Distribution Limited Engineers Signature:
7 Service & Maintenance Record Product Details: Model: Serial number: Purchase Date: Date: Description of checks/work carried out: Parts Used? Y/N Please note that failure to service your machine on schedule or use genuine Lumag parts and consumables will result in your warranty being void Parts Invoice Number: Dealers Name: Engineers Name: Distribution Limited Engineers Signature:
8 Service & Maintenance Record Product Details: Model: Serial number: Purchase Date: Date: Description of checks/work carried out: Parts Used? Y/N Please note that failure to service your machine on schedule or use genuine Lumag parts and consumables will result in your warranty being void Parts Invoice Number: Dealers Name: Engineers Name: Distribution Limited Engineers Signature:
9 Service & Maintenance Record Product Details: Model: Serial number: Purchase Date: Date: Description of checks/work carried out: Parts Used? Y/N Please note that failure to service your machine on schedule or use genuine Lumag parts and consumables will result in your warranty being void Parts Invoice Number: Dealers Name: Engineers Name: Distribution Limited Engineers Signature:
10 Safety Instructions 3-5 Identification...6 Operations.7 Inspection & Maintenance Troubleshooting.9-10 Specifications Exploded View Parts List NOTE: Any modification to processor will void any and all warranty. 2
11 INSPECT Closely inspect all components and ensure all exterior bolts are tightened. Contact the freight company that delivered the unit to report delivery damage. INSPECT Choose a level surface to operate the firewood processor. Block the firewood processor wheels to prevent unintended movement. Position muffler at least 7 feet from combustible objects. ADD FLUIDS Engine is shipped without oil. Before starting engine, fill with SAE 10/30 motor oil. See engine manual for engine oil capacity. Hydraulic reservoir is shipped without oil. When adding oil, use the dipstick to gauge amount. Approximately 5 gallons of AW Type Hydraulic Oil only. 3
12 OPERATION You must be 16 or older to operate this machine. Never tow or operate this processor while under the influence of alcohol, drugs or medication. Wear safety glasses and hearing protection, tight-fitting safety gloves and steel-toe boots. Keep untrained people out of work zone. Only operate the firewood processor in daylight. Never leave the log processor unattended, while the engine is running. Never wear loose clothing when operating the firewood processor. Serious accidents can happen when other people are allowed inside the work zone. Keep everyone else out of the work zone while operating the firewood processor. TOWING Be aware of the added length of the firewood processor. Never ride or transport cargo on the firewood processor. Drive the vehicle with the wood Processor securely attached Wood processor collapsed storage. NOTE: For towing, wheel wood be raised and leg would be reinserted from top 4
13 High-pressure hydraulic fluid can inject under skin resulting in serious injury, including amputation. Ensure all fittings are tight before apply pressure. Relieve system pressure before servicing. Do not check for leaks with hand. Seek immediate medical help if skin if punctured. RISK OF FIRE & EXPLOSION Hot exhaust fumes from engine can cause fire. Gasoline is highly flammable and explosive. You can be burned or seriously injured when handling fuel. Before adding fuel, stop the engine and keep heat,sprks, and flame away. Do not add fuel when engine is running or still hot. Do not smoke near the engine while fueling. Do not pump fuel directly into engine at gas station. Static charge can build and ignite fuel. Use a safety approved fuel container to transfer gas to the engine. Wipe up fuel spills immediately. Only store and handle fuel outdoors. Gasoline vapors can ignite if they collect inside and enclosure. Explosion may result. Do not change or add to exhaust system. Fire may result. Do not touch the muffler as you may get burned. Poisonous fumes from engine can kill you. Do not operate indoors. 5
14 IDENTIFICATION Key components of your Wood Processor 1. Safety Screen: Stops hydraulic operations when screen is raised. 2. Log Deck: The log deck is angled to help keep the log against the deck wall without operator assistance. 3. Conveyor: Transfer splitting logs to packing bag. 4. Front Leg: Helps support the firewood processor while operating. Should be pulled out of the sleeve and reinserted from top down while towing. 5. Saw Bar Handle: Use the saw bar handle to draw the chain saw down, run the chain, and to move the splitter block forward. 6. Rear Leg: Helps support the firewood processor while operating. Should be pulled out of the sleeve and reinserted from top down while towing. 6
15 OPERATION 1. Preset the cut-off length using the measuring bar. Loosen the 2 wing nuts and slide the bar to the correct position. Re-tighten the wing nuts. 2. Load a log onto the log cradle and slide into processor until the end of the log touches the measuring bar. 3. Open the ball valve to start the flow of bar oil. 4. Pull the Saw Bar Handle down to engage the chain. 5. Gently pull the Saw Bar Handle downwards with the chain running and cut through the wood. 6. The cut piece will drop into the splitter area, raise Saw Bar Handle and ram will engage. Note: If the log drops in a wrong direction, use Ram Stop to stop the cylinder operation and fix log. 7. Once the log has been pushed through the splitter, The ram will automatically retract. 8. Repeat Steps above to split more logs. Stub Piece When a stub piece needs to be cut, make sure to cut the short piece off, so that the longer piece is on log deck. This keeps hands away from moving chain. 7
16 INSPECTION Check the following components EACH TIME the Processor is used. What How HOSES Inspect for exposed wire mesh and leaks. Replace all worn or damaged hoses before starting engine. HYDRAULIC FITTINGS Inspect for cracks and leaks. Replace all damaged fittings before starting engine. NUTS&BOLTS Visually Check for loose bolts. MOVING PARTS Clear debris. RAM VALLEY Clean Sawdust from slider area after every use to prevent possible jamming Grease Ram slider & saw chain engagement roller/pad every use. CHAIN Check saw chain for sharpness and correct tension. BAR OIL Ensure Bar Oil tank is full. CONVEYOR If Conveyor Belt is not centered on pulleys, use adjusting bolts to correct position of belt. MAINTENANCE Before maintenance, the Processor must be placed in maintenance mode: Turn off engine. Move the saw bar handle down and up multiple times to relieve hydraulic pressure After performing maintenance, make sure all guards, shields, and safety features are put back in place. Failure to follow this warning can result in serious injury. Refer to the engine owner s manual for engine maintenance. 8
17 Every 10Hours of Operation Nuts & Bolts: Tighten all bolts, including motor mounts & large nut on hydraulic ram. Grease: Grease 3 conveyor bearings as well as wheel hubs and log rollers. Engine Oil: Check level and cleanliness use 10/30 oil. Hydraulic Oil: Check level and cleanliness use AW Series Hydraulic Oil only. Air Filter: Check & clean engine air filter if necessary. Failure to do regular maintenance will void warranty. Only use AW Series Hydraulic Oil. Use of any other oil will Void All Warranties. TROUBLESHOOTING Problem Cylinder rod will not move Slow cylinder rod speed when extending or retracting Wood will not split or splits extremely slowly Engine bogs down during splitting Cause A, D, E, H, J A, B, C, H, I, K, L A, B, C, F, I, K G, L Engine stalls under low load condition D, E, L, M, O 9
18 Cause Description Solution Description A- Insufficient oil to pump Check oil level in reservoir B- Air in oil Check oil level in reservoir C- Excessive pump inlet vacuum D- Blocked hydraulic lines E- Blocked control valve Check pump inlet hose for blockage or kinks Flush and clean the processor hydraulic system Flush and clean the processor hydraulic system F- Low control valve setting Adjust control valve with a pressure gauge G- High control valve setting Adjust control valve with a pressure gauge H- Damaged control valve Return control valve for authorized repair I- Internal control valve leak Return control valve for authorized repair J- Internal cylinder leak Return cylinder for authorized repair K- Internally damaged cylinder Return cylinder for authorized repair L- Engine control out of adjustment Adjust idle control nuts M- Engine is loaded during idle down mode N- Coupler between engine and hydraulic pump disconnected Use shorter log length(24 or less) to allow engine to speed up before contact Ensure the rubber coupler is in place and tighten hex screw O- Dirty air filter Clean or replace filter 10
19 MODEL SPECIFICATIONS Model: Engine: Maximum Splitting Force: Bar: Chain: Hydraulic Oil Capacity: Max. Log Length: Max. Log Diameter: Conveyor belt width: SSA400G 13HP Lifan gasoline engine 10Ton 18in. 72section 27L 55cm 40cm 15cm Conveyor length: 3.2m Pump for Saw Motor: 308 Hydraulic Cylinder Stroke: Cycle Time: Max. Towing Speed: 55cm 9second 45MPH Note: The manufacturer reserves the right to make improvements in design and/or changes in specification at any time without incurring any obligation to install them on units previously sold. Any modification to Processor will void all warranty. Failure to do regular maintenance or used approved oil type will void warranty. 11
20 Distribution Limited PART DRAWINGS FOR YOUR SAFETY READ AND UNDERSTAND THE ENTIRE MANUAL BEFORE OPERATING THIS MACHINE
21 No. Model Qty. No. Model Qty. 13
22 1 Cylinder fixed pin 1 33 Oil window 1 2 Φ30 Shaft circlip 1 34 M8X35 Socket head cap screw 10 3 Hydraulic cylinder 1 35 M12X30 Bolt 5 4 M12 Lock nut Main frame 1 5 Φ12Pad plate ZG1/2 Connector 1 6 M12X40 Round head hex socket screw 6 38 Filter (short) 1 7 Cylinder spacing board A 1 39 Φ27 compound gasket 1 8 M8X20 Bolt G3/4 Connector 1 9 Φ8 Spring washer M6X25 Socket head cap screw 2 10 Φ8 Pad plate Φ6 Spring washer 8 11 Push plate 1 43 Φ6 Pad plate Oil return filter 1 13 M10 Lock nut T-joint 1 14 Φ10 Pad plate M6 Lock nut M10X70 Bolt 6 47 M6X60 Bolt CHG Valve 1 17 Φ4 Spring cotter 3 49 Compound gasket Φ Support leg pin 1 50 CHE Valve 1 19 Support leg 1 51 Speed valve G1/2 Connector Oil hose shield connecting plate 1 21 Oil pump 1 53 M6X16 Bolt 6 22 Gear box 1 54 Φ25 Ring-shield 1 23 M8X10 Set screw 3 55 Roller B 1 24 M10x35 Bolt 4 56 Roller B support shaft 1 25 Roller x30 Key 1 26 Roller support tube 1 58 Φ3X35 Cotter pin 8 27 Roller shaft A 1 59 M8 Lock nut Roller bracket 1 60 Joint sleeve 1 29 M12X100 Bolt 1 61 Gerotor motor 1 30 Roller shaft B 1 62 M12x40 Bolt 2 31 Support leg 1 63 Oil cap 1 32 G1/2-G3/4 Connector 2 64 Φ65x3.55 O-ring 1 No. Model Qty. No. Model Qty 14
23 65 CHG 2 Valve Adjusting rivet 1 66 Axe Bracket 1 67 M6X35 Bolt Chainsaw plate 1 68 Conveyor fixed pin Chainsaw blade 1 69 Φ3 Spring cotter M8x75 Bolt 2 70 Caliper holder A Chainsaw handle A 1 71 Caliper holder spring Chainsaw handle B 1 72 Φ20 Pad plate M8X55 Bolt 4 73 Conveyor connecting pin Hydraulic hose fitting B 4 74 Caliper holder B Oil pump joint 2 75 M6X20 Wing bolt Chainsaw pump 1 76 CHG2 Valve sliding block Axe spacing plate 1 77 Left cover Axe lifting handle 1 78 M6X35 Bolt Φ10 Pad plate 1 79 Chainsaw cover plate Axe lifting spring 1 80 M6x16 Socket head cap screw Axe lifting shaft 1 81 Chainsaw cover plate fixed plate Driving lever 1 82 Chainsaw cover Air cleaner 1 83 Φ8 Plastic pipe clamp Right cover 1 84 Ball valve M6X40 Bolt 2 85 Φ8 Plastic pipe U pin 1 86 Grease box Log lifting retaining bracket 1 87 Φ8 Plastic pipe clamp(elbow) M4X16 Socket head cap screw 2 88 Oil filler cap M4 Lock nut 2 89 M10X40 Bolt Right cover lock bracket 1 90 CHG2 Valve spacing plate Right cover lock spring 1 91 M8X25 Bolt Right cover lock shaft 1 92 Motor bracket Kit 1 93 Φ12 Spring washer Rubber plate 1 94 M12X30 Bolt Fixed plate 1 95 Chain wheel M6x20 Bolt 2 96 Chain wheel washer Hopper 1 97 M12 Nut Conveyor support leg 1 98 M8X50 Socket head cap screw M6X16 Round head hex socket screw 3 99 M6X60 Socket head cap screw M6x16 Cross recessed countersunk head screw 2 15
24 Unit 10, Hatchmoor Industrial Estate, Hatherleigh, Okehampton, Devon EX20 3LP Lumag Distribution Limited Company Number: VAT Number: GB Hatherleigh Plant and Tool Hire is a trading name of Lumag Distribution LTD
RedGum GP160 Splitter. Owner s Manual
RedGum GP160 Splitter Owner s Manual Product Description & Intended Purpose: This Log Splitter / Wood Splitter is an outdoor product that splits wood logs for use as fuel in a fireplace or a woodstove.
More informationOwner s Manual Pressure Washer Pump: For high pressure cleaning machines.
MA578F.2 TM ITEM NUMBERS: A57370, A57398, A57754, A578, A5787, A5783, A5788, A5785, A57820 A578203, A57873 Owner s Manual Pressure Washer Pump: For high pressure cleaning machines. WARNING Read this manual.
More informationaccidents which arise due to nonobservance and the safety information herein. SPECIFICATIONS
22 TON LOG SPLITTER Model: 6212 CALIFORNIA PROPOSITION 65 WARNING: You can create dust when you cut, sand, drill or grind materials such as wood, paint, metal, concrete, cement, or other masonry. This
More informationLog Splitter. Owner/Operator Manual. Models HCWP1-26
Log Splitter Owner/Operator Manual Models HCWP1-26 SAFETY..........................2 SAFETY WARNING SYMBOL.........3 SAFETY RULES.................. 4-5 SPECIFICATIONS................. 6 CONTROLS AND FEATURES.......
More informationOwner s Manual Pressure Washer: Machine that cleans dirty surfaces with high pressure water.
M1577541A TM ITEM NUMBERS: 1577541, 1577542 Owner s Manual Pressure Washer: Machine that cleans dirty surfaces with high pressure water. WARNING Read this manual. Serious injury or death can result if
More information9HP EARTH AUGER W/5 AUGER BIT
9HP EARTH AUGER W/5 AUGER BIT Owner s Manual 1 ! Hazard Signal Word Definition!! DANGER!WARNING!CAUTION! CAUTION This is the safety alert symbol. It is used to alert you to potential personal injury hazards.
More informationBT-1.5, BT-1.5-LP (NITRO) POWER UNIT Operations Manual
BT-1.5, BT-1.5-LP (NITRO) POWER UNIT Operations Manual BT-1.5 BT-1.5-LP TNT Rescue Systems, Inc. 2490 West Oak Street Ashippun, WI 53003 920-474-4101 or 800-474-4189 E-Mail: email@tntrescue.com! WARNING!
More informationPOWER UNIT Operations Manual
PTO-TWIN-ATT & PTO-TWIN-ATT-LP POWER UNIT Operations Manual PTO-TWIN-ATT PTO-TWIN-ATT-LP TNT Rescue Systems, Inc. 2490 West Oak Street Ashippun, WI 53003 920-474-4101 or 800-474-4189 E-Mail: email@tntrescue.com!
More informationLoose Parts Note: Determine the left and right sides of the machine from the normal operating position.
Brake Kit Dingo TX 0 & Compact Utility Loader Part No. 0 0 & 0 Loose Parts Note: Determine the left and right sides of the machine from the normal operating position. Description Qty. Use Drive wheel Brake
More informationTable of Contents. Safety symbols... 3 Assembly 6. Operation Maintenance Troubleshooting 11. Storage. 12. Notes. 13
Table of Contents Safety symbols... 3 Assembly 6 Operation... 8 Maintenance... 10 Troubleshooting 11 Storage. 12 Notes. 13 2 Safety Information Attention; this machine can be dangerous! All operators should
More information! WARNING! Read This Manual Before Operating Equipment
ATT-6.5, ATT-6.5-RC, ATT-6.5-LP, ATT-6.5-LP-RC POWER UNIT Operations Manual ATT-6.5 ATT-6.5-RC ATT-6.5-LP ATT-6.5-LP-RC TNT Rescue Systems, Inc. 2490 West Oak Street Ashippun, WI 53003 920-474-4101 or
More informationAND OPERATING INSTRUCTIONS IMPORTANT:
WOOD CHIPPER User Manual FM6.5WC SAFETY AND OPERATING INSTRUCTIONS IMPORTANT: Read safety rules and instructions carefully before operating equipment. Table of Contents Table of Contents PART I: General
More informationBACKHOE. Installation, Operation and Maintenance Manual. Backhoe: Digs trenches in earth up to 7ft. deep.
BACKHOE Installation, Operation and Maintenance Manual Backhoe: Digs trenches in earth up to 7ft. deep. Import-Rules for safe Operation 1) Read the Owner s Manual completely before attempting to use this
More informationModel: CW8T Electric / Hydraulic Log Splitter OPERATOR S MANUAL
EU Model: CW8T520 1314 Electric / Hydraulic Log Splitter OPERATOR S MANUAL Please read the manual first. It will help you assemble, prepare, operate and maintain the unit for best performance. Pay special
More informationPost Driver Attachment
Attachment (Shown with Optional Power Cell Rotator) Models - 600, 850 Safety Instructions This safety alert symbol indicates important safety messages in this manual. When you see this symbol, carefully
More informationRange Road RR20T Firewood Processor. Crated Unit Assembly Manual
Range Road RR20T Firewood Processor Crated Unit Assembly Manual Crated Unit 1.) Undo 8-18mm x 19mm Nuts and bolts, 2 on each leg of top frame 2.) Lift top of Metal crate off and move out of work area.
More informationAIR-COOLED DIESEL GENERATOR OWNERʼS MANUAL. This manual contains important safety information. TDG2500E TDGW7000E TDG7000SE TDG4500E
AIR-COOLED DIESEL GENERATOR OWNERʼS MANUAL This manual contains important safety information. TDG2500E TDGW7000E TDG7000SE TDG4500E TDG8000-3 TDG7000SE-3 TDG7000E TDG8000E TDGW7000SE TDG7000E3 TDGW8000E
More informationSawhorse with Chainsaw Holder
Sawhorse with Chainsaw Holder Owner s Manual Chainsaw not included. WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and
More informationLight condition and operation Windshield glass condition Wiper blade condition Paint condition and corrosion Fluid leaks Door and hood lock condition
GENERAL CHECKS Engine Compartment The following should be checked regularly: Engine oil level and condition Transmission fluid level and condition Brake fluid level Clutch fluid level Engine coolant level
More informationSTRUT SPRING COMPRESSOR
OWNER S MANUAL PRODUCT CODE: 1221T STRUT SPRING COMPRESSOR Capacity Stroke Spring Coil Spring Spring Coil Net Weight (Maximum) Thickness Length Diameter 1,000kg 330mm 10-18mm 210-570mm 100-158mm 36kg Made
More informationSAVE THESE INSTRUCTIONS
OPERATION MANUAL WARHORSE IMPORTANT SAFETY INSTRUCTIONS WARNING: Failure to observe these instructions can cause personal injury to machine operator or bystanders. WARNING: Asphyxiation Hazard. An improperly
More informationMaintenance and Repair
Maintenance and Repair WARNING ALWAYS shut off the engine, remove key from ignition, make sure the engine is cool, and disconnect the spark plug and positive battery terminal from the battery before cleaning,
More informationOWNER S MANUAL PRODUCT CODE: 2006T
Jul-18 Product Code: 2006T OWNER S MANUAL PRODUCT CODE: 2006T HYDRAULIC PIPE BENDER 12,000KG Model Capacity Bending Die No of Attachments 12,000kg 1/2", 3/4", 1", 1-1/4", 1-1/2", 2" 6 Made in China to
More informationNorth Dakota State University Grounds Maintenance Equipment
North Dakota State University Grounds Maintenance Equipment I. Introduction Grounds maintenance equipment is an important part of the work activities on NDSU campus. They can make grounds maintenance jobs
More informationInstallation and Operation Manual
1645 Lemonwood Dr. Santa Paula, CA 93060 USA Toll Free: 1 (800) 253-2363 Tel: 1 (805) 933-9970 rangerproducts.com Ranger Floor Jack Installation and Operation Manual Manual Revision B July 2017 Manual
More informationOWNER S MANUAL. Item #
GAS-POWERED CONCRETE SCREED OWNER S MANUAL WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in
More informationOFF TRUCK COMPONENTS PERSONAL PLOW
August 1, 2006 Lit. No. 27554, Rev. 08 27550 OFF TRUCK COMPONENTS PERSONAL PLOW Installation Instructions Read this document before installing the snowplow. See your sales outlet for specific vehicle application
More informationOWNER S / OPERATOR S MANUAL
OWNER S / OPERATOR S MANUAL SAFETY PAGE 1 RECOGNIZE SAFETY INFORMATION This is the safety-alert symbol. When you see this symbol in this manual or on your EdgeMasterTM, be alert to the potential for personal
More information1000-lb Hydraulic Truck Crane
1000-lb Hydraulic Truck Crane Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions
More information456 Series Hydra-Lift Drum Rollers Operator s Manual for Morse Hydra-Lift Drum Rollers 456 Series
Contents Page Receiving Procedures.................... 1 Warranty............................. 1 Safety Information..................... 1-2 Machine Description................... 3 Options.........................
More informationSERVICE SCHEDULE. Zero-Turn Mowers
SERVICE SCHEDULE Zero-Turn Mowers OWNER & MOWER DETAILS Mr/Mrs/Ms: Given Names: Surname: Address: Suburb: State: Postcode: Telephone: Email: Model No.: Serial No.: Engine Model/Type/Code: DEALER DETAILS
More informationMANUAL OPERATOR S TW-C12, TW-C20, TW-C24, Conveyors. Commercial Grade TW-C26, TW-C30HD.
OPERATOR S MANUAL TW-C12, TW-C20, TW-C24, TW-C26, TW-C30HD Commercial Grade Conveyors www.timberwolfcorp.com TW-C12, TW-C20, TW-C24, TW-C26, TW-C30HD Commercial Grade Conveyor Operation Manual Fill out
More informationGRACO INC. P.O. BOX 1441 MINNEAPOLIS, MN
REPAIR J Line Driver Model 233725 U.S. Patent Number 6,883,633 Important Safety Instructions Read all warnings and instructions in this manual. Save these instructions. 10 mph (16 kph) Maximum Operating
More informationMODEL CF-00-F3-O GAS FLANGE WAY CLEANER OPERATION, MAINTENANCE, AND REPAIR MANUAL
MODEL CF-00-F3-O GAS FLANGE WAY CLEANER OPERATION, MAINTENANCE, AND REPAIR MANUAL 1805 2 nd AVENUE NORTH * MOORHEAD, MN, USA 56560-2310 1 PHONE (218) 236-0223 * FAX (218) 233-5281 E-MAIL ADDRESS; info@portaco.com
More informationWARNING! Decals. IMPORTANT INFORMATION Xxxx xxx xxxx xx xxxx x xxxx. Xxxx xxx xxxx xx xxxx x xxxx.
symbols and decals Xxxx xxx xxxx xx xxxx x xxxx. Used in this publication to notify the reader of a risk of personal injury, particularly if the reader DOES NOT follow the instructions given in the manual.
More informationLOG CHOP. Hydraulic Wood Guillotine. Owners Illustrated Instruction Book & Parts List
LOG CHOP Hydraulic Wood Guillotine Owners Illustrated Instruction Book & Parts List Grovebury Road, Leighton Buzzard, Bedfordshire. LU7 4UX. UK. Tel:01525 375157. Fax:01525 385222. Email: enquires@brownsagricultural.co.uk
More informationTP300 INDUSTRIAL TRASH PUMP OPERATOR S MANUAL
TP300 INDUSTRIAL TRASH PUMP OPERATOR S MANUAL IT IS EXTREMELY IMPORTANT TO READ AND UNDERSTAND THE ENTIRE CONTENTS OF THIS OPERATOR S MANUAL BEFORE ATTEMPTING TO OPERATE THE PRODUCT. THIS EQUIPMENT IS
More informationModels 8100PP & 86110LP. Installation Instructions CAUTION. Read this document before installing the snowplow. CAUTION
September 15, 2010 Lit. No. 48645, Rev. 02 POWER PLOW Snowplows Models 8100PP & 86110LP Installation Instructions Read this document before installing the snowplow. See your BLIZZARD outlet/web site for
More informationSTRAIGHT DIE GRINDER MODEL EGA530 OWNERS MANUAL
STRAIGHT DIE GRINDER MODEL EGA530 OWNERS MANUAL www.eaglecompressor.com 1-800-551-2406 READ THE ENTIRE MANUAL BEFORE PUTTING THIS TOOL IN SERVICE Limited Air Tool Warranty Eagle warrants air tools of its
More information7350 Series Power Transfer
750 Series Power Transfer Installation, Maintenance and Parts Manual DORNER MFG. CORP. INSIDE THE USA OUTSIDE THE USA P.O. Box 0 975 Cottonwood Ave. TEL: -800-97-8664 TEL: 6-67-7600 Hartland, WI 509-000
More informationPRODIGY & PRO PLUS Skid Steer Snowplows
Western Products, PO Box 245038, Milwaukee, WI 53224-9538 www.westernplows.com June 15, 2017 Lit. No. 78552, Rev. 01 PRODIGY & PRO PLUS Skid Steer Snowplows PRODIGY Blade Assembly 57700 PRO PLUS Blade
More informationLAWN MOWER OWNER S MANUAL
LAWN MOWER OWNER S MANUAL Woodies SKU: 1153279 & 1153280 CAUTION: Read and follow all Safety Rules and Instructions before operating this equipment Thank you for choosing our Gasoline Lawnmower. 1 To ensure
More informationDecals. IMPORTANT INFORMATION Xxxx xxx xxxx xx xxxx x xxxx. WARNING! Xxxx xxx xxxx xx xxxx x xxxx.
symbols and decals Xxxx xxx xxxx xx xxxx x xxxx. IMPORTANT INFORMATION Xxxx xxx xxxx xx xxxx x xxxx. Used in this publication to notify the reader of a risk of personal injury, particularly if the reader
More informationZ500 Series Z Master Mowers
Z500 Series Z Master Mowers Form No. 3352 977 Setup Instructions Loose s Use the chart below to verify all parts have been shipped. Note: Retain the bolts that hold the center rollbar to the packaging.
More informationGROUNDSMASTER. 52 Recycler. for 120 Traction Unit. Model No & UP. Operator s Manual
FORM NO. 8-980 Rev A GROUNDSMASTER 5 Recycler for 0 Traction Unit Model No. 077 79000 & UP Operator s Manual IMPORTANT: Read this manual carefully. It contains information about your safety and the safety
More information518xi, 520xi & 522xi GARDEN TRACTOR
FORM NO. 96 58xi, 50xi & 5xi GARDEN TRACTOR MODEL NO. 77 990000 & UP MODEL NO. 75 990000 & UP MODEL NO. 756 990000 & UP SET UP INSTRUCTIONS Loose Parts Use the chart below to identify parts for assembly.
More informationVLW18TE, VLW18TI HYDRAULIC VERTICAL LIFTING WEDGES. Operator Instruction Manual INNOVATION IN ITS MOST FUNCTIONAL FORM
VLW18TE, VLW18TI HYDRAULIC VERTICAL LIFTING WEDGES Operator Instruction Manual info@equalizerinternational.com www.equalizerinternational.com INNOVATION IN ITS MOST FUNCTIONAL FORM INDEX SECTION CONTENTS
More informationOperation Manual. 10 Mini-Cultivator MODEL #
10 Mini-Cultivator MODEL # 103350 Operation Manual This safety alert symbol identifies important safety messages in this manual. Failure to follow this important safety information may result in serious
More informationCompactor Wacker Plate Operator s Manual RPi31DE
Distribution Limited Compactor Wacker Plate Operator s Manual RPi31DE FOR YOUR SAFETY READ AND UNDERSTAND THE ENTIRE MANUAL BEFORE OPERATING THIS MACHINE Distribution Limited Warranty Registration Form
More informationProLine. 44 Mower. for 120 Traction Unit. Model No & Up. Operator s Manual
FORM NO. 9 ProLine Mower for 0 Traction Unit Model No. 05 99000 & Up Operator s Manual IMPORTANT: Read this manual carefully. It contains information about your safety and the safety of others. Also become
More informationNOTES FOR SAFETY OPERATOR-ONLY.
NOTES FOR SAFETY Both the parents and their child must fully understand everything in this manual before riding. This vehicle is for OPERATOR-ONLY. This vehicle is only designed for operation on level,
More informationINSPECTION/ADJUSTMENT
3 3 INSPECTION/ADJUSTMENT SERVICE INFORMATION----------------------------------------------------------------------- 3-1 MAINTENANCE SCHEDULE-------------------------------------------------------------------
More informationOwner s Manual Trencher/Edger: Cuts trenches in dirt.
M191185C.7 ITEM NUMBER: 191185 SERIAL NUMBER: Owner s Manual Trencher/Edger: Cuts trenches in dirt. Any Questions, Comments, Problems or Parts Orders Call NorthStar Product Support 1-800-270-0810 Table
More informationWheel Horse. 48 Mower. for 5xi Tractors. Model No & Up. Operator s Manual
FORM NO. 9 Wheel Horse 48 Mower for 5xi Tractors Model No. 786 990000 & Up Operator s Manual IMPORTANT: Read this manual, and your tractor manual, carefully. They contain information about your safety
More informationOperating and Assembly Manual
Model 1080 Operating and Assembly Manual Midwest Equipment Manufacturing, Inc. 5225 Serum Plant Road Thorntown, IN 46071 08-02-16 SAFETY RULES Remember, any power equipment can cause injury if operated
More informationOwner s Manual. Mortar / Plaster Mixer. Models M785 M1000 M1200
Owner s Manual Mortar / Plaster Mixer Models M785 M1000 M1200 Tiger Equipment LLC. 15 Byrd Lane Rocky Mount, VA 24151 Tel: 540-489-7777 Fax: 540-489-7778 www.tigerequip.com 1. PREFACE This manual contains
More informationForm No Wheel Horse. 52 in. Mower 5xi Tractor Attachment. Model No and Up. Operator s Manual. Domestic English (EN)
Form No. -50 Wheel Horse 5 in. Mower 5xi Tractor Attachment Model No. 7870 0000000 and Up Operator s Manual Domestic English (EN) Contents Page Introduction................................ Safety and Instruction
More informationOwner's Manual. Remote Switch: Outdoor agricultural sprayer kit used to remotely turn On/Off the boom. Read this manual.
M22851A.2 Owner's Manual Remote Switch: Outdoor agricultural sprayer kit used to remotely turn On/Off the boom. WARNING Read this manual. Serious injury or death can result if safety instructions are not
More informationMODEL EGA200 OWNERS MANUAL
3/8 RATCHET WRENCH MODEL EGA200 OWNERS MANUAL www.eaglecompressor.com 1-800-551-2406 READ THE ENTIRE MANUAL BEFORE PUTTING THIS TOOL IN SERVICE Limited Air Tool Warranty Wood Industries, Inc. warrants
More informationSingle and Double Head Powered Screed. Screed King. User Manual. SCR-UM EN-04 (December 2018)
Single and Double Head Powered Screed Screed King SCR-UM-00364-EN-04 () User Manual Single and Double Head Powered Screed, Screed King CONTENTS Scope of This Manual.............................................
More informationLP DEL PAC. ATLAS COPCO CONSTRUCTION TOOLS AB NACKA SWEDEN No
LP 13-20 DEL PAC ATLAS COPCO CONSTRUCTION TOOLS AB 2007-03 NACKA SWEDEN No. 3392 5146 01 www.atlascopco.com 1 English!"!" INTRODUCTION... 2 SAFETY INSTRUCTIONS... 2 Introduction to safety... 2 Safety symbols
More informationWheel Horse. 48 Mower. for Lawn and Garden Tractors. Model No & Up. Operator s Manual
FORM NO. 5 Wheel Horse 48 Mower for Lawn and Garden Tractors Model No. 786 990000 & Up Operator s Manual IMPORTANT: Read this manual carefully. It contains information about your safety and the safety
More information3. INSPECTION/ADJUSTMENT
3 3 INSPECTION/ADJUSTMENT SERVICE INFORMATION -------------------------------------------- 3-1 MAINTENANCE SCHEDULE ---------------------------------------- 3-2 FUEL LINE/FUEL FILTER -------------------------------------------
More informationDisc Brake System ( For Cross-Country)
Technical Service Instructions General Safety Information Disc Brake System ( For Cross-Country) SI-8C60F t WARNING Please use extra caution to keep your fingers away from the rotating disc brake rotor
More informationSPEEDWING & Heavy Duty Skid Steer Snowplows
November 1, 2015 Lit. No. 84720, Rev. 00 SPEEDWING & Heavy Duty Skid Steer Snowplows HD Blade Assembly 77720, 77725, 77730 SPEEDWING Blade Assembly 77740 HD A Frame/Attachment Plate & Hydraulics 77825
More informationInstallation and Operation Manual
1645 Lemonwood Dr. Santa Paula, CA 93060 USA Toll Free 1 (800) 253-2363 Tel: 1 (805) 933-9970 rangerproducts.com High-Speed Oil Filter Crusher Installation and Operation Manual Manual Revision C May 2017
More informationPackage Contents Part A (3) I-Beam (1) Base (2) Other parts
Page 1 Installation Instructions for 81245 Adjustable Height Gantry Crane 1-Ton Capacity Table of Contents Important Safety Information pg. 2 Specific Operation Warnings pg. 2 Main Parts of Product pg.
More informationOPERATION AND MAINTENANCE MANUAL
WREN IBT SERIES HYDRAULIC TORQUE WRENCHES IBT SQUARE DRIVE SERIES OPERATION AND MAINTENANCE MANUAL FOR WREN Products: POINT 75, 1IBT, 3IBT, 5IBT, 8IBT, 10IBT, 20IBT, 25IBT, 35IBT, 50IBT SQUARE DRIVE HYDRAULIC
More informationAC2T & AC2T-ES INDUSTRIAL GASOLINE AIR COMPRESSOR
AC2T & AC2T-ES INDUSTRIAL GASOLINE AIR COMPRESSOR INDUSTRIAL GAS AIR COMPRESSOR OPERATOR S MANUAL IT IS ETREMELY IMPORTANT TO READ AND UNDERSTAND THE ENTIRE CONTENTS OF THIS OPERATOR S MANUAL BEFORE ATTEMPTING
More informationHydraulic Bead Breaker Kit
Hydraulic Bead Breaker Kit Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions
More informationOperating and Assembly Manual
Model 470-/H/PRO/IC Operating and Assembly Manual Midwest Equipment Manufacturing, Inc. 5225 Serum Plant Road Thorntown, IN 46071 11-11-11 SAFETY RULES Remember, any power equipment can cause injury if
More informationSPECIFICATIONS SKIDRIL SKIDRIL P.O. BOX 8041 GREENSBORO, NC TEL: OPERATION & PARTS MANUAL ENGINE BREAKER G23
SPECIFICATIONS MODEL G23 DIMENSIONS 32 X18 X13 WEIGHT 50 LB. ENGINE TYPE SINGLE CYLINDER, AIR COOLED, 2 CYCLE DISPLACEMENT 40.2 CC OUTPUT 1.4PS/6000 RPM CARBURATION DIAPHRAGM, W/PRIMER AND CHOKE AIR CLEANER
More informationAdjustable Steel Welding Table
Adjustable Steel Welding Table Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety
More informationOwner s/operator s Manual
Water Pump MP2533E2 Owner s/operator s Manual Completely read and understand this manual before using this product. Foreword This Owner s/ Operator s Manual is designed to familiarize the operator with
More informationWHEEL HORSE LAWN TRACTOR
FORM NO. 897 WHEEL HORSE LAWN TRACTOR FOR AND 8 MOWERS SET-UP INSTRUCTIONS Loose Parts Note: Use the chart below to verify all parts have been shipped. DESCRIPTION QTY. USE Front Wheel Shim Washer (as
More information1/4 ANGLE DIE GRINDER
1/4 ANGLE DIE GRINDER MODEL EGA500 OWNERS MANUAL www.eaglecompressor.com 1-800-551-2406 READ THE ENTIRE MANUAL BEFORE PUTTING THIS TOOL IN SERVICE Limited Air Tool Warranty Wood Industries, Inc. warrants
More informationOWNER S MANUAL PRODUCT CODE: BOD1907
OWNER S MANUAL PRODUCT CODE: BOD1907 90 LITRE OIL DRAINER EXTRACTOR Transparent Tank Vacuum Working Degree of Net Recovery Dimensions Capacity Pressure Vacuum Weight Chamber Capacity 90 Litre 10 Litre
More information500kg TELESCOPIC TRANSMISSION LIFTER
Product Code: 2056T PRODUCT CODE: 2056T 500kg TELESCOPIC TRANSMISSION LIFTER Safe Working Capacity 500kg Base Dimension 540 x 570 mm Minimum Height 1175mm Maximum Height 1900mm Made in China to TQB Brands
More informationTable of Contents. Safety Assembly Pre-operation / Starting. 7. Operation.. 8. Maintenance. 9. Storage 10
Table of Contents Safety... 3 Assembly... 6 Pre-operation / Starting. 7 Operation.. 8 Maintenance. 9 Storage 10 Parts drawings..11 Parts list by number..12 Notes.13 2 Safety Information Attention; this
More informationWheel Horse. 42 Mower. for Lawn and Garden Tractors. Model No & Up. Operator s Manual
FORM NO. 9 559 Rev A Wheel Horse 4 Mower for Lawn and Garden Tractors Model No. 78 890000 & Up Operator s Manual IMPORTANT: Read this manual carefully. It contains information about your safety and the
More information1-1/2 DIAMETER WATER PUMP
1-1/2 DIAMETER WATER PUMP 2.2HP/79.8cc Engine MODEL # 101099 Operation Manual This safety alert symbol identifies important safety messages in this manual. Failure to follow this important safety information
More informationOPERATION MANUAL FOR SQUARE DRIVE & LOW PROFILE HYDRAULIC TORQUE WRENCHES NOTICE WARNING
OPERATION MANUAL FOR SQUARE DRIVE & LOW PROFILE HYDRAULIC TORQUE WRENCHES NOTICE Hydraulic Torque Wrenches are designed for installing and removing large bolts having minimal wrench clearance at offshore
More informationPORTABLE CONCRETE VIBRATOR
PORTABLE CONCRETE VIBRATOR OPERATION MANUAL MODEL PV45S INTRODUCTION We have taken care in the selection, testing and design of this product. Should service or spare parts be required this can be provided
More informationROTARY TILLER. Operation, Service & Parts Manual For "AS" Series. FORM: ASTillerBook.QXD
ROTARY TILLER Operation, Service & Parts Manual For "AS" Series FORM: ASTillerBook.QXD April 2002 TABLE OF CONTENTS Preparation......................................1 Assembly Instructions.............................2
More informationElectric Airless Sprayers Operating Instructions
Electric Airless Sprayers Operating Instructions 309365 Rev. A 3000 psi (210 bar, 21 MPa) Maximum Working Pressure How To Perform: Component Identification....... 3 Setup........................... 4 Startup..........................
More informationWOOD CHIPPER WC1103 5PQ (8/02/12)
O P E R A T O R ' S M A N U A L WOOD CHIPPER WC1103 5PQ990101 (8/02/12) To the Owner; Thank-You for choosing a quality product from Frontier Equipment. We strive to give you the best equipment and the
More informationINSTALLATION & PART S MANUAL
INSTALLATION & PART S MANUAL CONVERSION KIT 96110119 FOR CONVERTING SNO-WAY S STANDARD LIGHTING KITS (96102357 and 96106606) TO THE EIS KIT Sno-Way, Down Pressure and EIS are registered trademarks of Sno-Way
More informationSERIES OPERATION AND MAINTENANCE MANUAL
SERIES OPERATION AND MAINTENANCE MANUAL This manual CONTAINS IMPORTANT WARNINGS, S and OTHER INSTRUCTIONS. Read and understand the instruction manual Carefully, before use and retain it for reference.
More informationROTARY BRUSH CUTTERS THE LEADER OF THE PACK OWNER/OPERATOR SAFETY & INSTRUCTION MANUAL
72 M-AX ROTARY BRUSH CUTTERS THE LEADER OF THE PACK OWNER/OPERATOR SAFETY & INSTRUCTION MANUAL CONTENTS Page 1. Introduction..................................2 2. Safety Instructions...........................3-4
More informationOwner s Manual. Instructions for Assembly, Testing, Operation, and Servicing. Trailer Kit: High speed upgrade kit used with Item# WARNING
M268176D.1 ITEM NUMBER: 268176 SERIAL NUMBER: Owner s Manual Instructions for Assembly, Testing, Operation, and Servicing Trailer Kit: High speed upgrade kit used with Item# 268175 WARNING READ and UNDERSTAND
More informationTrench Filler for Compact Utility Loaders
Form No. 3353-608 Rev A Trench Filler for Compact Utility Loaders Model No. 22472 260000001 and Up Operator s Manual Register your product at www.toro.com Original Instructions (EN) Contents Page Introduction................................
More informationWestern Products, PO Box , Milwaukee, WI PRODIGY Snowplow 57700, 57800, 57810, ,
Western Products, PO Box 245038, Milwaukee, WI 53224 9538 www.westernplows.com December 15, 2016 Lit. No. 42419, Rev. 02 PRODIGY Snowplow 57700, 57800, 57810, 57800-1, 57810-1 Installation Instructions
More informationKING CANADA 950W PORTABLE GENERATOR MODEL: KCG-951G INSTRUCTION MANUAL COPYRIGHT 2011 ALL RIGHTS RESERVED BY KING CANADA TOOLS INC.
KING CANADA 950W PORTABLE GENERATOR MODEL: KCG-951G INSTRUCTION MANUAL COPYRIGHT 2011 ALL RIGHTS RESERVED BY KING CANADA TOOLS INC. WARRANTY & SERVICE INFORMATION 1-YEAR LIMITED WARRANTY FOR THIS 950W
More informationFPC815 Pneumatic Rivet Tool
WARRANTY If you have any problems with this tool, please call FPC Corporation toll-free at 1-800-860-3838 before returning it to the place of purchase. FPC815 Pneumatic Rivet Tool FPC Corporation warrants
More informationTrencher Dingo Attachment
Form No. 3326-453 Trencher Dingo Attachment Model No. 22459 2000000 & Up Operator s Manual English (CE) Contents Page Introduction................................ 2 Safety.....................................
More informationOWNER S, INSTALLATION AND PARTS MANUAL
OWNER S, INSTALLATION AND PARTS MANUAL QUICK HITCH CONVERSION KIT CONVERTS ST TO 22 SERIES HITCH FOR PLOW SERIAL NUMBERS AFTER STD100000 STG100000 2006 Sno-Way International 97101306A TABLE OF CONTENTS
More information1732-M2 Portable C-Frame Punch Driver
INSTRUCTION MANUAL GREENLEE 1732-M2 Portable C-Frame Punch Driver Read and understand all of the instructions and safety information in this manual before operating or servicing this tool. Register this
More informationPistol Grip Battery-powered Pressing Tool
OPERATION MANUAL Serial Number Pistol Grip Battery-powered Pressing Tool PSTLPRESS-TOOL32kN Read and understand all of the instructions and safety information in this manual before operating or servicing
More informationSHEYENNE TELE-BOOM OWNERS MANUAL OPERATOR INSTRUCTIONS PARTS BOOK
SHEYENNE TELE-BOOM OWNERS MANUAL OPERATOR INSTRUCTIONS PARTS BOOK 701 Lenham Ave. SW PO Box 647 Cooperstown ND 58425 1-800-797-1883 701-797-2700 * 701-797-2584 Fax www.sheyennemfg.com TABLE OF CONTENTS
More informationHOFFMANN POWER PRODUCTS PARTS LIST 2014
HOFFMANN POWER PRODUCTS PARTS LIST 2014 VIBRATORY PLATE COMPACTOR ALL PARTS ARE SUBJECT TO STANDARD HOFFMANN TERMS AND CONDITIONS OF SALE 2010 Replacement parts are not manufactured, sold or warranted
More information