H30. H30 style Roger Technology conceived with logic ROGER TECHNOLOGY

Transcription

1 H30 H30 style Roger Technology conceived with logic SPECIAL PERFORMANCE Electro-mechanical reduction gear available in 5 versions, for sliding gates up to 400, 600 kg. The main structure is in die-cast aluminium, stove-enamelled with specific epoxy resins for outdoors. RANGE H30 VERSIONS H30/ V with built-in control unit H30/ V with built-in control unit magnetic H30/ V with built-in control unit H30/ V with built-in control unit magnetic H30/623 24V with built-in control unit SURE RELEASE The solid die-cast aluminium release handle with customized key allows release and manual movement of the gate at all time. SMOOTH MOVEMENT Worm screw in special steel with precision finish and hardening of the thread. EVERYTHING IN PLACE 2 seals ensure perfect tightness with regard to the grease inside the reduction gear and at the same time keep water out. BRONZE AND STEEL FOR PERFECT MATING Bronze crown gear and steel worm screw with precision finishing and hardening of the thread to ensure perfect, lownoise and durable mating. SOLID AND RELIABLE The main structure is in die-cast aluminium. TOTAL PROTECTION Outgoing gear fully protected by an affective plastic shell PERFECT AND SILENT REVS FOR MINUTE 2 special precision bearings for electric motors. 19

2 H30 H30 H30/423 H30/424 H30/603 H30/604 POWER SUPPLY V accessories RATING W THRUST N DUTY CYCLE % MOTOR OVERLOAD CUTOUT C WORKING TEMPERATURE C SPEED OF MOVEMENT m/min 9,5 9,5 MAX GATE WEIGHT Kg GA550 galvanised steel rack 22x22x1000 module 4 GA551 galvanised steel rack 30x12x1000 module 4 complete with spacers and screws GA552 nylon rack module 4 with 4 connectors L 1000 GA553 nylon rack module 4 with 6 connectors L 1000 dimensions MC751 MC752 kit MC753 magnetic MC754 magnetic kit 83 MC762 MC763 kit MC764 magnetic MC765 magnetic kit set up for standard installations MC772 MC773 kit MC774 magnetic MC775 magnetic kit 0 mm A B A Rack B Foundation plate MC771 safety micro KT214 fixing plate complete with stay bolts and screws for H30 KT221 raised fixing plate with stay bolts and screws for H30 21

3 R30 R30 style Roger Technology conceived with logic NOTHING SPARED FOR PERFORMANCE Electro-mechanical reduction gear available in 5 versions, for sliding gates up to 800, 1200 kg. The main structure is in die-cast aluminium, stove-enamelled with specific epoxy resins for outdoors. RANGE R30 VERSIONS R30/ V with built-in control unit R30/ V with built-in control unit magnetic R30/ V with built-in control unit R30/ V with built-in control unit magnetic ALL-ROUND PROTECTION Electric motor protected by a sensitive safety thermostat. RELEASE IN ALL SAFETY Manual release is protected by a microswitch that inhibits automatic operation of the reduction gear. EVERYTHING IN PLACE 2 seals ensure perfect tightness with regard to the grease inside the reduction gear and at the same time keep water out. BRONZE AND STEEL FOR PERFECT MATING Bronze crown gear and steel worm screw with precision finishing and hardening of the thread to ensure perfect, lownoise and durable mating. PRECISE FIXING 6 points for meticulous levelling to obtain best support. SOLID AND RELIABLE The main structure is in die-cast aluminium. CONTROL AND SAFETY Optical encoder for constant control of gate movement. R30/1209 three-phase 380V without built-in control unit 23

4 R30 R30 R30/803 R30/804 R30/1203 R30/1204 R30/1209 POWER SUPPLY V accessories RATING W THRUST N DUTY CYCLE % MOTOR OVERLOAD CUTOUT C WORKING TEMPERATURE C SPEED OF MOVEMENT m/min 9,5 9,5 9,5 GA550 galvanised steel rack 22x22x1000 module 4 GA551 galvanised steel rack 30x12x1000 module 4 complete with spacers and screws GA552 nylon rack module 4 with 4 connectors L 1000 GA553 nylon rack module 4 with 6 connectors L 1000 MAX GATE WEIGHT Kg dimensions MC751 MC752 kit MC753 magnetic MC754 magnetic kit MC762 MC763 kit MC764 magnetic MC765 magnetic kit set up for standard installations MC772 MC773 kit MC774 magnetic MC775 magnetic kit 0 mm A B A Rack B Foundation plate KT210 fixing plate complete with stay bolts and screws KT211 side angle complete with screws KT212 raised fixing plate KT213 fixing plate and angle bars kits MC771 safety micro 25

5 G30 G30 style Roger Technology conceived with logic STURDY AND POWERFUL FOR LARGES APERTURES Electro-mechanical reduction gear available in 4 versions, for sliding gates up to 1800, 2200 kg. The main structure is in die-cast aluminium, stove-enamelled with specific epoxy resins for outdoors. RANGE G30 VERSIONS G30/ V with built-in control unit G30/ V with built-in control unit magnetic G30/ V with built-in control unit G30/ V with built-in control unit magnetic ALL-ROUND PROTECTION Electric motor protected by a sensitive safety thermostat. SURE RELEASE The solid die-cast aluminium release handle with customized key allows release and manual movement of the gate at all time. EVERYTHING IN PLACE 2 seals ensure perfect tightness with regard to the grease inside the reduction gear and at the same time keep water out. BRONZE AND STEEL FOR PERFECT MATING Bronze crown gear and steel worm screw with precision finishing and hardening of the thread to ensure perfect, lownoise and durable mating. PRECISE FIXING 6 points for meticulous levelling to obtain best support. PRECISELY CENTRED All the housing of the bearings and the motor assembly are turned and ensure long-lasting constant, perfect and silent rotation. CONTROL AND SAFETY Optical encoder for constant control of gate movement. 27

6 G30 G30 G30/1803 G30/1804 G30/2203 G30/2204 POWER SUPPLY V accessories RATING W THRUST N DUTY CYCLE % MOTOR OVERLOAD CUTOUT C WORKING TEMPERATURE C SPEED OF MOVEMENT m/min 9,5 9,5 MAX GATE WEIGHT Kg GA550 galvanised steel rack 22x22x1000 module 4 GA551 galvanised steel rack 30x12x1000 module 4 complete with spacers and screws GA552 nylon rack module 4 with 4 connectors L 1000 GA553 nylon rack module 4 with 6 connectors L 1000 dimensions MC751 MC752 kit MC753 magnetic MC754 magnetic kit MC762 MC763 kit MC764 magnetic MC765 magnetic kit set up for standard installations MC772 M773 kit MC774 magnetic MC775 magnetic kit 0 mm A B A Rack B Foundation plate MC771 safety micro KT215 fixing plate complete with stay bolts and screws for G30 KT222 fixing plate raised with stay bolts and screws for G30 29

7 H70/100AC H70/100AC H70/103AC POWER SUPPLY N ACTIVATED MOTORS MAX. POWER FOR MOTOR MAX. POWER FLASHING LIGHT MAX. POWER COURTESY LIGHT MAX. POWER GATE OPEN LIGHT MAX. CURRENT ACCESSORIES OUTPUT WORKING TEMPERATURE ADJUSTMENT OF MOTOR TORQUE SPEED ADJUSTMENT 230 V ac +/- 10% 50 Hz W 230Vac 2A 230Vac 2A 2 W 24 V cc 300mA 24 V cc C to TRIAC to TRIAC FLOXIBILITY CONTROL Showing input and modify of the parameter through a high brightness display. Soft-start and slowing down before the stop of the gate. Open gate indicator light, flashing program in four different ways. Possibility to protect the different configuration by a password. Possibility to restore the standard configuration. RANGE CONTROL UNIT VERSIONS H70/100AC control board for 1 motor 230V universal H70/103AC control board for 1 motor 230V INPUT OPEN CLOSE PEDESTRIAN LOCK STEP BY STEP STOP SAFETY EDGE 1 SAFETY EDGE 2 PHOTOCELLS 1 PHOTOCELLS 2 MECHANICAL RELEASE OPENING LIMIT SWITCH CLOSING LIMIT SWITCH ENCODER OUTPUT OPEN GATE INDICATOR LIGHT ACCESSORIES POWER SUPPLY 24VCC FLASHING LIGHT CONTACT COURTESY LIGHT CONTACT MOTOR CAPACITOR PROGRAMMABLE FUNCTIONS AUTOMATIC RECLOSING RECLOSE AFTER BLACK-OUT CONDOMINIUM STEP-BY-STEP PRE-FLASHING DEADMAN AUTOMATICALLY OR MANUAL LEARNING OF THE TRAVEL LENGHT AND SLOW DOWN LENGHT PEDESTRIAN OPENING WORKING TIME AND PAUSE UP TO 198 SEC. NORMAL FORCE ON TRAVEL AND IN SLOW DOWN LENGHT AND START UP POWER START UP POWER AND COME BACK TIME, DUE TO SAFETY ACCESSORIES SOFT-START RELEASE THRUST SENSIBILITY OF ANTICRUSHING PHOTOCELLS BEHAVIOUR OPENING AND CLOSING WITH CROSS ON PHOTOCELLS DURING STOP, INDIPENDENT ENABLES ON LIMIT SWITCH, PHOTOCELL, STOP, COME BACK RIGHT OR LEFT MOTOR SAFETY EDGE ASSIGNMENT OF 2 RADIO CHANNELS TO A SPECIFIC FUNC- TION INTERMITTENCE FLASHING LIGHT COURTESY LIGHT TIME 91

8 H80 H80 TX22 CARRIER FREQUENCY MHz RADIATED POWER 100 µw CODING fixed, 268 millions NUMBER OF CHANNELS 2 POWER SUPPLY 12 V with 23 A type battery WORKING TEMPERATURE C RANGE 150 metres in open area dimensions EVERYTHING IN ONE CLICK Radio control with carrier frequency 433,92 in UHF band with two channels. With randomly generated fixed code stored in non-volatile storage. (268 million possible combinations). RANGE H80 VERSION H80/TX22 fixed code radio control MHz 2 channels 99

9 R93 RADIO RECEIVERS R93 R93/RX12/I R93/RX12/U R93/RX14M/24 R93/RX14M/230 G93/RX32/U H93/RX22/I RECEIVE FREQUENCY MHz MHz MHz MHz MHz POWER SUPPLY 12/24 V ac/dc 12/24 V ac/dc 230 V ac 12/24 V ac/dc 5 V dc NUMBER OF CHANNELS G93/RX32/U R93/RX14M/24 R93/RX14M/220 MAX CURRENT RELAY CONTACTS 0.5 A 0.5 A 0.5 A 0.5 A MAX VOLTAGE RELAY CONTACTS 24 V ac/dc 24 V ac/dc 24 V ac/dc 24 V ac/dc WORKING TEMPERATURE C C C C C OUTPUT Relay Relay Relay Relay Open collector R93/RX12/I R93/RX12/U dimensions box R93/RX14M box RX12/U R93 ALWAYS READY TO ANSWER Modular, terminal or plug-in receiver system, the latter designed to be inserted directly into the universal control units, and up to four channels for varying uses. RANGE R93 VERSIONS RECEIVERS R93/RX12/I R93/RX12/U H93/RX22/I G93/RX32/U R93/RX14M/24 R93/RX14M/230 plug-in receiver with two channels for control unit R MHz terminal receiver with two channels MHz plastic box plug-in receiver with two channels for control unit H MHz terminal receiver with two channels MHz plastic box modular receiver with 4 channels (1 fixed monostable and 3 set up for relay modules) MHz plastic box power supply 24V modular receiver with 4 channels (1 fixed monostable and 3 set up for relay modules) MHz plastic box power supply 230V box G93/RX32/U 109

10 R70/2AC ANTENNA 2 CHANNELS R70/2AC H70/103AC SELECTION BUTTON SCROLLING BUTTON PEDESTRIAN OPENING STEP-BY-STEP CONTROL ANTENNA CLOSING OPENING CONTR. INPUT COM. MAINS POWER SUPPLY 230 V 50 Hz COURTESY LIGHT FOR LIGHTS FLASHING LIGHT M1 M2 ELECTRIC LOCK GATE OPEN INDICATOR LIGHT 24 Vac ACCESSORIES 24 Vac TST PHOTOCELL 1 PHOTOCELL 2 SAFETY EDGE LIMIT SWITCH M1 LIMIT SWITCH M1 LIMIT SWITCH M2 LIMIT SWITCH M POWER SUPPLY 230 V FOR TRANSFORMER ADJUSTMENT OF TORQUE ON TRANSFORMER 0 V 12 V 24 V 0 V 12 V MECHANICAL RELEASE INPUT LIMIT SWITCH INPUT ENCODER INPUT S3 S2 + - S1 RADIO CONNECTOR FUSE 0,5A FAST COM AP CH PED ORO ANT COM PP ST COS1 COS2 FT1 FT2 COM SC 24V - - OPEN - CLOSE - PEDESTRIAN - CLOCK - ANTENNA - - STEP BY STEP - STOP - SAFETY EDGE 1 - SAFETY EDGE 2 - PHOTOCELLS 1 - PHOTOCELLS OPEN GATE LED 24VCC - ACCESSORIES POWER 24VCC MAX 300 MA OPEN 28 CLOSE STEP-BY-STEP PEDESTRIAN GATE STOP FUSE 6,3A FAST CHANNELS ANTENNA MOTOR CAPACITOR COURTESY FLASHING LIGHT F N POWER 230VAC STEP-BY-STEP PHOTO 1 STOP 111

11 H70/100AC H70/10AC H70/100AC H70/10AC SELECTION BUTTON SCROLLING BUTTON S2 + +5Vcc +24Vcc LIMIT SWITCH 2 LIMIT SWITCH 1 ENCODER COM S1 RADIO RECEIVER FUSE 1A S3 - COM - AP - OPEN CH - CLOSE PED - PEDESTRIAN ORO - CLOCK ANT - ANTENNA COM - PP -STEP BY STEP ST - STOP COS1 - SAFETY EDGE 1 COS2 -SAFETY EDGE 2 BOARD POWER MOTOR POWER FLASHINGLIGHT POWER V AC/DC FUSE 2A COURTESY LIGHT MOTOR AND EN- STEP BY STEP PHOTOCELL STOP +24CC OPEN GATE LED ANTENNA FT1 - PHOTOCELLS 1 FT2 - FPHOTOCELLS 2 FLASHING LIGHT LED PP LED PHOTO COM - LED STOP SC - OPEN GATE LED 24VCC 24VACCESSORIES POWER 24VCC MAX 300MA PAUSE TIME OPENING FORCE CLOSING FORCE SETTING BOTTON FUSE 6,3 A MOTOR CAPACITOR COURTESY FLASHING LIGHT F N POWER 230VAC FUSE 6,3 A PHASE 230 VAC NEUTRAL 230 VAC 113

12 R90/F1E - R93/RX14M/ H93/RX22/I - G93/RX32/U R90/F1E H93/RX22/I H93/RX22/I (Transmitter) (Receiver) P1 L1 L2 P2 R93/RX14M/24 RX14M/24 P1 L1 P2 L2 P3 L3 P4 L4 R93/RX14M/230 RX14M/230 P1 L1 P2 L2 P3 L3 P4 L4 G93/RX32/U G93/RX32/U J2 J1 ON 12Vac/dc J1 24/12 V AC/DC CH1 CH2 CH3 CH4 220 V AC CH1 CH2 CH3 CH4 J1 OFF 24Vac/dc L1 P1 P2 L2 R93/RX12/I L1 P1 P2 L2 R93/RX12/U CH1 CH2 12/ V AC/DC 12/24 CH1 CH2 115