INVITATION TO BID. (This is not an order.)

Transcription

1 Page 1 of 6 SCHEDULE OF EVENTS Event Description 1 / 1 ARMSTRONG CIRCULATING PUMP / Event Date ARMSTRONG #H51-1 BF CIRCULATING PUMP TECHNICAL SPECS--- Item Hot Water Circulating Pump HVAC Circulating Pump Type Hot Water Circulating Pump HP 1/4 Voltage - Pumps 115VAC Phase - Pumps 1 Connection Style NPT/Flange Inlet/ Outlet Size 1" Shut-Off 45 ft. Housing Material - Pumps Cast Iron Max. Head ft. Series H Face to Face Dimension 11-1/2" Best Efficiency Head ft. Min. Head ft. Drive Type Direct Height 11-1/2" Length 17-1/4" Width 13-1/2" Loop Configuration Closed Flange/Union Included Yes Includes Flange Gaskets Max. Operating Pressure 175 psi Max. Temp. 225 Degrees F Amps 5.80 RPM 1800 Number of Speeds 1 Thermal Protection Yes Pump Mount In Line Impeller Material 30% Glass-Filled Noryl(R) Shaft Material Stainless Steel Mechanical Seal Maintenance Free Features Compact, High Performance, Permanently Lubricated Ball Bearings Manufacturers Warranty Length 2 yr. Compliance NSF-372 Unit Price Extension Delivery Days 1 / 2 Marathon Electric Motor-Condensate Motors / MARATHON ELECTRIC MOTOR-EPACT EFFICIENCY PART NO-DM0076 MODEL - PVB 143TTDR4118AA P FR-143TCVZ PH-3 TYPE-TDR HZ-60 HP-1 1/2 RPM-3450 AMB-40C INS-B3 DES-B VOLT /460 CODE-K ENC-DPIP-22 DUTY-CONT *APPROVED EQUAL SUBSTITUTION MAY BE USED* Unit Price Extension Delivery Days 1 / 3 Baldor M 1723T / BALDOR M1723T MOTOR: SPEC. NUMBER: 36A01Y48 CATALOG NUMBER: M1723T FL AMPS: 4/ V AMPS: -- BRING- DRIVE-END: 6206 BRING-OPP-DRIVE-END: 6205 DESIGN CODE: B DOE-CODE: -- FL EFFICIENCY: -- ENCLOSURE: TEFC FRAME: 184T HERTZ: 60 INSULATION-CLASS: F KVA-CODE: G SPEED [rpm]: 1725/1140 OUTPUT [hp]: 3/1.3 PHASE: 3 POWER-

2 Page 2 of 6 FACTOR: -- RATING: 40C AMB-CONT SERIAL-NUMBER: -- SERVICE FACTOR: 1.15 VOLTAGE: 460V ***APPROVED EQUAL SUBSTITUTION MAY BE USED**** Unit Price Extension Delivery Days 1 / 4 Baldor M / BALDOR M3546 : SPEC. NUMBER: 35A011M492G1 CATALOG NUMBER: EM3546 FL AMPS: 3.1-3/ V AMPS: 3.1 BRING-DRIVE-END: 6205 BRING-OPP-DRIVE-END: 6203 DESIGN CODE: B DOE-CODE: -- FL EFFICIENCY: 85.5 ENCLOSURE: TEFC FRAME: 56 HERTZ: 60 INSULATION-CLASS: F KVA-CODE: L SPEED [rpm]: 1760 OUTPUT [hp]: 1 PHASE: 3 POWER-FACTOR: 71 RATING: 40C AMB-CONT SERIAL-NUMBER: -- SERVICE FACTOR: 1.15 VOLTAGE: /460 ****APPROVED EQUAL SUBSTITUTION MAY BE USED**** Unit Price Extension Delivery Days 1 / 5 Leeson / LEESON : 1.5/.37HP,1725/850RPM,145T,TEFC,460V,3PH,60HZ,2-SPEED ****APPROVED EQUAL SUBSTITUTION MAY BE USED**** Unit Price Extension Delivery Days 1 / 6 Baldor M3611T /

3 Page 3 of 6 BALDOR M3611T HP, 1750RPM, 3PH, 60HZ, 182T, 3546M, TEFC, F1 Frequency HZ HZ HZ ****APPROVED EQUAL SUSTITUTION MAY BE USED***** Unit Price Extension Delivery Days 1 / 7 Marathon D / MARATHON D KC42GN0014A AC 1/2HP 115/ V-AC 1725RPM ELECTRIC MOTOR D245408***APPROVED EQUAL SUBSTITUTION MAY BE USED*** Unit Price Extension Delivery Days 1 / 8 Baldor M / BALDOR M M BALDOR 1.5HP, 1730RPM, 3PH, 60HZ, 56, 3520M, TEFC, F1, MOTOR STANDARD (RIGID BASE) ****APPROVED EQUAL SUSTITUTION MAY BE USED**** Unit Price Extension Delivery Days 1 / 9 Leeson / LEESON /.5HP.1725/850RPM.145.TEFC.460V.3PH.60HZ.CONT.40C.1.0SF.RIGID.C145T48F B48D.TWO-SPEED. ***APPROVED SUBSTITUTION MAY BE USED****

4 Page 4 of 6 Unit Price Extension Delivery Days 1 / 10 Barber/Coleman MP / The MP series actuators are used for two-position, floating, and proportional control of dampers, valves, and program switches in heating, ventilating, air conditioning, and similar applications. Hazardous location models offer a sturdy cast aluminum case with bolted cover. They have two 3/4" pipe tapped openings for joints with rigid metal conduit. All wiring is brought out to separate terminals for ease of installation. These factory enclosure and actuator assemblies are Underwriters Laboratories Listed. Specs Fail Safe Mode: Spring Return Torque: 50 lb-in Wiring: 3 Wire Timing: 30 Seconds Voltage: 120v Operating Temp Range: -40 to 136F Unit Price Extension Delivery Days 1 / 11 Barber /Coleman MA / BARBER/COLEMAN MA Description These actuators provide two-position operation of dampers, valves, and other equipment requiring the return to normal position upon power interruption. Features SPST controller. Spring return. 24, 120, 208, and 240 Vac models. SPDT auxiliary switch if actuator part number suffix is "-500." Rugged die cast aluminum Oil immersed motor and gear train.*******specs Voltage: 120v Fail Safe Mode: Spring Unit Price Extension Delivery Days 1 / 12 Fasco / FASCO Condenser Fan Motor,1/10 HP,115V---- ItemCondenser Fan Motor Motor ApplicationOEM Replacement Motor Sub ApplicationCondenser Fan Motor DesignShaded Pole Motor Enclosure DesignOpen Air-Over HP1/10 Nameplate RPM1050 Voltage115

5 Page 5 of 6 Full Load Amps3.6 FrameNon-Standard Motor Factor1.00 Hz60 Motor Mounting TypeFace Motor BearingsBall Motor Shaft RotationCWSE Ins. ClassA Max. Ambient Temp.40 Degrees C No. of Speeds1 Phase1 Shaft Dia.1/2" Motor Shaft DesignFlat Shaft Length2-3/4" Body Dia.5-7/64" Length Less Shaft3-13/16" Overall Length6-9/16" Capacitor RequiredNo Replacement For2414 ApplicationFans and Blowers RPM Range Unit Price Extension Delivery Days 1 / 13 Baldor M1223T / 3-1.3HP 1725/1140RPM 184T OPEN 460V 3PH Baldor Motor M1223T Baldor Definite Purpose Motors used on Fans, blowers, and pumps. 2 speed Unit Price Extension Delivery Days 1 / 14 AO SMITH/CENTURY / M125 Three Phase Motors Multi-Speed 1.5/.68 HP Applications: For two speed, one and two winding, variable torque applications for speed control from one speed to another while under load. Blowers, fans, conveyors, mixing machines, centrifugal pumps. 1.5/.68 HP 2 Speed 1800/1200 RPM Volts Two Winding Variable Torque 5-4.9/ Full Load Amp 145TFrame 60 Hz Ball Bearing Factor 1.15 Unit Price Extension Delivery Days Vendor Total Amount for Items Vendor Total Amount for s Payment Offer $ $ % Day(s)

6 Page 6 of 6 TERMS OF DELIVERY Price quoted shall be F.O.B. delivered to the place designated on purchase order. No other terms will be acceptable. Delivery quoted must be stated in terms of work days after receipt of the order. All charges for shipping must be included within the Unit Price for each item quote unless otherwise designated by a separate line with a specified dollar amount inclusive of all shipping charges. No freight charges will be considered nor processed for payment unless apart of the original quote submitted prior to bid award. BIDDER AGREES TO COMPLY WITH ALL TERMS AND CONDITIONS BELOW AND ON REVERSE SIDE OF THIS BID Shipping/Freight Charges ALL CHARGES FOR SHIPPING MUST BE INCLUDED WITHIN THE UNIT PRICE OF CH QUOTE UNLESS OTHERWISE DESIGNATED BY A SEPARATE LINE ITEM WITH A SPECIFIED DOLLAR AMOUNT INCLUSIVE OF ALL SHIPPING CHARGES. NO FREIGHT CHARGES WILL BE CONSIDERED NOR PROCESSED FOR PAYMENT UNLESS APART OF THE ORIGINAL QUOTE SUBMITTED PRIOR TO BID AWARD. BIDDER MUST COMPLETE & SIGN BELOW NAME OF THE FIRM: STREET ADDRESS: CITY: STATE: ZIP CODE: FED ID # / SSN #: PHONE NO.: FAX NO.: ADDRESS: PLSE PRINT CONTACT NAME: AUTHORIZED SIGNATURE: DATE: All bids and related documents must be enclosed in a sealed envelope and marked with the RFB number. RETURN BID TO: Division of Purchases & Supplies 601 Lakeside Ave, City Hall