Product Information Packet EM4313T 75HP,3550RPM,3PH,60HZ,365TS,1464M,TEFC,F

Transcription

1 Product Information Packet EM1T 75HP,550RPM,PH,60HZ,65TS,16M,TEFC,F Copyright All product information within this document is subject to A Motors and Mechanical Inc. copyright protection, unless otherwise noted.

2 Part Detail Revision: R Status: PRD/A Change #: Proprietary: No Type: AC Elec. Spec: A6WG0107 CD Diagram: Mfg Plant: Mech. Spec: Layout: Poles: 0 Created Date: ase: Eff. Date: Leads: #,6# Specs Catalog Number: EM1T Feedback Device: NO FEEDACK Enclosure: TEFC Heater Indicator: No Heater Frame: 65TS Insulation Class: F Frame Material: Iron Inverter Code: Inverter Ready Frequency: HZ KVA Code: F Synchronous Frequency: HZ Lifting Lugs: Standard Lifting Lugs Frequency: HZ Motor Lead Quantity/Wire AWG HZ Motor Type: A6068M XP Class and Group: None Mounting Arrangement: F1 XP Division: Not Applicable Power Factor: 9 Agency Approvals: CCSA US Pulley End earing Type: all CSA EEV Pulley Face Code: Standard Auxillary ox: No Auxillary ox Shaft Ground Indicator: No Shaft Grounding ase Indicator: Rigid Shaft Rotation: Reversible earing Grease Type: Polyrex EM (-0F +00F) Shaft Slinger Indicator: No Slinger Voltage: V Speed Code: Single Speed V Motor Standards: NEMA Design Code: Starting Method: Direct on line Page of 9

3 Drip Cover: No Drip Cover Thermal Device - earing: None Duty Rating: CONT Thermal Device - Winding: None Page of 9

4 Nameplate NP8L CAT.NO. EM1T SPEC NO. P6G06 HP 75 AMPS 161/80.7 VOLTS 0/60 DESIGN FRAME 65TS RPM 555 HZ 60 AM 0 SF 1.15 DRIVE END EARING 65C0J0X PHASE DUTY CONT INSUL.CLASS F OPP D.E. EARING 65C0J0X TYPE P ENCL TEFC CODE F SER.NO. POWER FACTOR 9 NEMA-NOM-EFFICIENCY 9.6 MAX CORR KVAR 05.0 GUARANTEED EFFICIENCY 9. NEMA NOM/CSA QUOTED EFF MOTOR WEIGHT Page of 9

5 S/O FRAME HP TYPE PHASE/ HERTZ RPM VOLTS Product Information Packet: EM1T - 75HP,550RPM,PH,60HZ,65TS,16M,TEFC,F AMPS 161/80.7 E/S LOAD NO LOAD 1/ / / / 5/ LOCKED ROTOR PULL UP REAKDOWN FULL LOAD 65TS DUTY CONT ROTOR TE HP AM C/ INSUL 0/F TEST S.O. --- AMPERES RPM SPEED TORQUE TORQUE % FULL LOAD AMPERES SHOWN FOR 60 VOLT CONNECTION. IF OTHER CONNECTIONS ARE AVAILALE, THE AMPERES WILL VARY INVERSELY WITH THE RATED VOLTAGE. P S.F PERFORMANCE TEST DATE --- RPM /60 NEMA DESIGN % POWER FACTOR TORQUE STATOR C OHMS (ETWEEN LINES) CODE LETTER F L.-FT..0186/.07 0/60 ENCLOSURE TEFC % EFFICIENCY AMPERES Page 5 of 9 TYPICAL DATA XE MOTOR-NEMA NOM. EFF. 9.6 % GUARANTEED MIN. EFF. 9.% DRAWN Y: CHECKED Y: APPROVED Y: DATE: J.J.HARRISON G. R. WE W.L.SMITH 10/16/0 AC MOTOR PERFORMANCE DATA A6WG0107-R001 DATE ISSUED 1/1/10 USCHJAM Printed on 11/1/017 9: AM

6 REL S.O. FRAME 65TS HP 75 TYPE P PHASE / HERTZ SPEED IN RPM () TORQUE IN L. FT. () P.F.() & EFF.() IN % AMPS AT 60 VOLTS (1) /60 AMPS AT 60 VOLTS (1) RPM 555 VOLTS 0/60 AMPS 161/80.7 DUTY CONT AM C / INSUL 1 0/F S.F NEMA DESIGN CODE LETTER F ENCLOSURE TEFC E/S XE MOTOR-NEMA NOM. EFF. 9.6 % GUARANTEED MIN. EFF. 9.% ROTOR TE TEST S.O. TYPICAL DATA TEST DATE --- STATOR 5 C.0186/.07 OHMS (ETWEEN LINES) HORSEPOWER FL 1 Page 6 of SPEED IN RPM,(FLT = 111 L. FT.) AMPERES SHOWN FOR 0/60 VOLT CONNECTION, IF OTHER VOLTAGE CONNECTIONS ARE AVAILALE, THE AMPERES WILL VARY INVERSELY WITH THE RATED VOLTAGE. DRAWN Y: J.J.HARRISON CHECKED Y: G. R. WE APPROVED Y: W.L.SMITH DATE: 10/16/0 AC MOTOR PERFORMANCE DATA A6WG0107-R001 1/1/10 ISSUE DATE USCHJAM Printed on 11/1/017 9: AM

7 REL S.O. FRAME 65TS HP 75 TYPE P PHASE / HERTZ TIME IN SEC. /60 OVERLOAD ACCELERATION LOCKED-ROTOR RPM 555 VOLTS 0/60 AMPS 161/80.7 DUTY CONT AM C / INSUL 0/F LOCKED-ROTOR, 0.C % FULL LOAD CURRENT S.F NEMA DESIGN CODE LETTER F ENCLOSURE TEFC E/S ROTOR TE TEST S.O. TYPICAL DATA TEST DATE --- STATOR 5 C.0186/.07 OHMS (ETWEEN LINES) MOTOR INITIAL TEMPERATURE: 1 C FOR OVERLOAD AND ACC. 1 C FOR LOCKED-ROTOR Page 7 of 9 THERMAL LIMIT CURVE AMPERES SHOWN FOR 0/60 VOLT CONNECTION, IF OTHER VOLTAGE CONNECTIONS ARE AVAILALE, THE AMPERES WILL VARY INVERSELY WITH THE RATED VOLTAGE. DRAWN Y: J.J.HARRISON CHECKED Y: G. R. WE APPROVED Y: W.L.SMITH DATE: 10/16/0 AC MOTOR PERFORMANCE DATA A6WG0107-R001 1/1/10 ISSUE DATE USCHJAM Printed on 11/1/017 9: AM

8 D ENCLOSURE: TOTALLY ENCLOSED MOUNTING: FOOT DUTY MASTER ALTERNATING CURRENT MOTORS SQUIRREL-CAGE INDUCTION CAST IRON CONSTRUCTION FRAMES 6TS-65TS COOLING: FAN COOLED D C.00 C.50 SQ KEY NPT HOLES A MAXIMUM PERMISSILE SHAFT RUNOUT WHEN MEASURED AT END OF STD. SHAFT EXTENSION IS.00 T.I.R. UP TO AND INCLUDING 1.65 DIA. AND.00 T.I.R DIA. TO 5 INCH DIA. WEIGHT (LS): 6T = 79 65T = 8 MOTOR WEIGHTS MAY VARY Y 15% DEPENDING UPON RATING CUSTOMER IS RESPONSILE FOR DETERMINING THAT ALDOR'S PRODUCT WILL PERFORM SUITALY IN THE INTENDED APPLICATION REV. DESC: UPDATING SHAFT AND CORRECTING A DIMENSION REV: A VERSION: 01 REVISED: 10:55: 0/8/01 TDR: MODEL NO REF: Y: RAGJSS1 DIM SHT TEFC 6-65TS FT MTG W/GRSR AND RELIEF A Page 8 of 9

9 Page 9 of 9