Product Information Packet L1317A 2HP,3450RPM,1PH,60HZ,56/56H,3528L,OPEN

Transcription

1 Product Information Packet L1317A 2HP,3450RPM,1PH,60HZ,56/56H,3528L,OPEN Copyright All product information within this document is subject to ABB Motors and Mechanical Inc. copyright protection, unless otherwise noted.

2 Part Detail Revision: AH Status: INA/A Change #: Proprietary: No Type: AC Elec. Spec: 35WG2792 CD Diagram: CD0008 Mfg Plant: Mech. Spec: 35J384 Layout: 35LYJ384 Poles: 02 Created Date: Base: RG Eff. Date: Leads: 4#14 A&J,2#18 B PH,1#10 #4TH Specs Catalog Number: L1317A Inverter Code: Not Inverter Enclosure: ODP KVA Code: G Frame: 56/56H Lifting Lugs: No Lifting Lugs Frame Material: Steel Locked Bearing Indicator: No Locked Bearing Frequency: HZ Motor Lead Quantity/Wire Size: 14 AWG, A&J Synchronous Frequency: HZ Motor Lead Exit: Ko Box Frequency: HZ Motor Lead Termination: Flying Leads HZ Motor Type: 3528L XP Division: Not Applicable Mounting Arrangement: F1 Agency Approvals: UR Power Factor: 75 CSA Product Family: General Purpose Auxillary Box: No Auxillary Box Pulley End Bearing Type: Ball Auxillary Box Lead Termination: None Pulley Face Code: Standard Base Indicator: Rigid Pulley Shaft Indicator: Standard Bearing Grease Type: Polyrex EM (-20F +300F) Rodent Screen: None Blower: None Shaft Extension Location: Pulley End Voltage: V Shaft Ground Indicator: No Shaft Grounding V Shaft Rotation: Reversible Page 2 of 13

3 V Shaft Slinger Indicator: No Slinger Design Code: L Speed Code: Single Speed Drip Cover: No Drip Cover Motor Standards: NEMA Duty Rating: CONT Starting Method: Direct on line Electrically Isolated Bearing: Not Electrically Isolated Thermal Device - Bearing: None Feedback Device: NO FEEDBACK Thermal Device - Winding: Do Not Use Eve-Not Valiid Front Face Code: Standard Vibration Sensor Indicator: No Vibration Sensor Front Shaft Indicator: None Winding Thermal 1: Automatic Thermal Overload Heater Indicator: No Heater Winding Thermal 1 Location: SB Insulation Class: B Winding Thermal 2: None Page 3 of 13

4 Nameplate NP1257L CAT.NO. L1317A SPEC. 35J HP 2 VOLTS 115/230 AMP 24/12 RPM 3450 FRAME 56/56H HZ 60 PH 1 SER.F CODE G DES L CL B NEMA-NOM-EFF 70 PF 75 RATING 40C AMB-CONT CC USABLE AT 208V 11.4 DE 6205 ODE 6203 ENCL OPEN SN Page 4 of 13

5 Parts List Part Number Description Quantity SA SA 35J EA RA RA 35J EA EC1850A06SP ELEC CAP 115V 2.0 X 4.3 X EA TP5059 GENERIC THERMAL KIT EA NS2512A01 INSULATOR, CONDUIT BOX X EA 35CB CB CASTING W/.88 DIA. LEAD HOLE EA 51XB1016A X 7/16 HXWSSLD SERTYB EA 11XW1032G X.38, TAPTITE II, HEX WSHR SLTD U EA 35EP3209G00 STD FR EP OPEN-203BRG-35L OR M FRAME--LE EA SP1006A01 TERM. BOARD, MODE 35 SW X H EA 51XW0832A X.44, TAPTITE II, HEX WSHR SLTD SE EA NS2501A01 INSULATOR, CAPACITOR EA 51XB1016A X5/16HX WA SL SR TYB (F/S) EA HW5100A03 WAVY WASHER (W ) EA 35EP3210B00 PUEP OPEN 205 BRG EA XY1032A HEX NUT DIRECTIONAL SERRATION EA 35CB LIPPED CB LID (GALV & PHOSPH) EA 51XW0832A X.44, TAPTITE II, HEX WSHR SLTD SE EA HW2501D13 KEY, 3/16 SQ X EA HA7000A04 KEY RETAINER DIA SHAFTS EA 85XU0407S04 4X1/4 U DRIVE PIN STAINLESS EA WD1000A AMP FLAG (4M/RL NON-CANC/NON EA MJ1000A02 GREASE, POLYREX EM EXXON (USe A) LB MG1000G27 MED CHARCOAL METALLIC GREY GA Page 5 of 13

6 Parts List (continued) Part Number Description Quantity LC0008 CONNECTION LABEL EA NP1257L ALUM UL CSA CC THERMAL REV MTG EA HA3100A18 THRUBOLT X EA 35CB4802A02SP CAPACITOR COVER, STAMPED X EA SP5055A67 MODEL 35 TYPE L STATIONARY SWITCH EA LB1118 LABEL,WARNING (ROLL LABEL) EA LB1125C01 STD (STOCK) CARTON LABEL BALDOR WITH FLA EA 35PA1066 PKG GRP, PRINT PK1008A EA MN416A01 TAG-INSTAL-MAINT no wire (1200/bx) 5/ EA Page 6 of 13

7 Accessories Part Number Description Multiplier C FACE KIT A8 35EP1604A01SP D-FLANGE KIT A8 Page 7 of 13

8 AC Induction Motor Performance Data Record # Typical performance - not guaranteed values Winding: 35WG2792-R001 Type: 3528L Enclosure: OPEN Nameplate Data 230 V, 60 Hz: High Voltage Connection Rated Output (HP) 2 Full Load Torque 3 LB-FT Volts 115/230 Start Configuration direct on line Full Load Amps 24/12 Breakdown Torque 8.4 LB-FT R.P.M Pull-up Torque 6.5 LB-FT Hz 60 Phase 1 Locked-rotor Torque 7.8 LB-FT NEMA Design Code L KVA Code G Starting Current 80 A Service Factor (S.F.) 1.15 No-load Current 9.8 A NEMA Nom. Eff. 70 Power Factor 75 Line line 25ºC Ω A Ph 1.06 Ω B Ph Rating - Duty 40C AMB-CONT Temp. Rated Load 54 C S.F. Amps Temp. S.F. Load 65 C Load Characteristics 230 V, 60 Hz, 2 HP % of Rated Load S.F. Power Factor Efficiency Speed Line amperes Page 8 of 13

9 Performance Graph at 230V, 60Hz, 2.0HP Typical performance - Not guaranteed values Page 9 of 13

10 AC Induction Motor Performance Data Record # Typical performance - not guaranteed values Winding: 35WG2792-R001 Type: 3528L Enclosure: OPEN Nameplate Data 230 V, 60 Hz: High Voltage Connection Rated Output (HP) 2 Full Load Torque 3.06 LB-FT Volts 115/230 Start Configuration direct on line Full Load Amps 24/12 Breakdown Torque 9.65 LB-FT R.P.M Pull-up Torque 6.65 LB-FT Hz 60 Phase 1 Locked-rotor Torque 8.86 LB-FT NEMA Design Code L KVA Code G Starting Current 77.4 A Service Factor (S.F.) 1.15 No-load Current 8.1 A NEMA Nom. Eff. 70 Power Factor 75 Line line 25ºC Rating - Duty 40C AMB-CONT Temp. Rated Load Load Characteristics 230 V, 60 Hz, 2 HP Ω A Ph Ω B Ph % of Rated Load S.F. Power Factor Efficiency Speed Line amperes Page 10 of 13

11 Performance Graph at 230V, 60Hz, 2.0HP Typical performance - Not guaranteed values Page 11 of 13

12 Page 12 of 13

13 Page 13 of 13