Product Information Packet ZDVSM4406T-4 150HP, RPM,3PH,60-90HZ,444T,A440

Transcription

1 Product Information Packet ZDVSM4406T-4 150HP, RPM,3PH,60-90HZ,444T,A440 Copyright All product information within this document is subject to ABB Motors and Mechanical Inc. copyright protection, unless otherwise noted.

2 Part Detail Revision: K Status: PRD/A Change #: Proprietary: No Type: AC Elec. Spec: A44WG0183 CD Diagram: Mfg Plant: Mech. Spec: Layout: Poles: 04 Created Date: Base: Eff. Date: Leads: 3#2/0 Specs Catalog Number: ZDVSM4406T-4 Duty Rating: CONT Enclosure: TEFC Feedback Device: ENCODER Frame: 445T Heater Indicator: No Heater Frame Material: Iron Insulation Class: F Frequency: HZ Inverter Code: Inverter Duty HZ KVA Code: M Synchronous Frequency: HZ Lifting Lugs: Standard Lifting Lugs Frequency: HZ Motor Lead Quantity/Wire Size: 2/0 AWG HZ Motor Type: A44078M XP Class and Group: None Mounting Arrangement: F1 XP Division: Not Applicable Product Family: Other Agency Approvals: CCSA US Pulley End Bearing Type: Ball Auxillary Box: No Auxillary Box Pulley Face Code: Standard Base Indicator: Rigid Shaft Ground Indicator: No Shaft Grounding Bearing Grease Type: Polyrex EM (-20F +300F) Shaft Rotation: Reversible Constant Torque Speed Range: 1000:1 Shaft Slinger Indicator: No Slinger Voltage: V Speed Code: Single Speed V Motor Standards: NEMA Page 2 of 13

3 Design Code: A Starting Method: Direct on line Drip Cover: No Drip Cover Thermal Device - Bearing: None Thermal Device - Winding: Normally Closed Thermostat Page 3 of 13

4 Nameplate HV CAT NO ZDVSM4406T-4 SPEC NO. P44G4014 SER.NO. FRAME 445T HP RPM VOLTS AMPS HZ TYPE P BASE SF 1.00 MAX INSUL.CLASS F DRIVE END BEARING 90BC03J30X CONSTANT TORQUE DUTY CONT AMB 40 OPP D.E. BEARING 6318C3VL :1 ENCL TEFC PHASE 3 DESIGN NO. A44WG0183-R001 FLUX AMPS 66.6 MAX SPEED/RPM 3600 OVERTEMP PROT 2 WK POLES 4 WEIGHT Page 4 of 13

5 Parts List Part Number Description Quantity SA SA P44G EA RA RA P44G EA LABEL, MYLAR EA PU N/P (RELEASE QTY 10,000) UL CSA LABEL EA VD LABEL WARNING EA HV N/P BALDOR VSMASTER EA A G28 BRKT WCA KB EA B CLAMP EA A G28 FAN COVER MACHINING SHORT VERSION EA DA KEY 1/4X1/4X1-3/4 L EA T FAN KB 182/70 (112) EA A GREASE POLYREX EM LB FK HHCS 3/4-10X2-1/2 PLTD EA CK HHCS 3/8-16X1L PLATED EA DK HHCS 1/2-13X3-3/4 PLTD EA DK HHCS 1/2-13X3-3/4 PLTD EA A CPLG 1/8 HEX TYPE EA A WSHR EA AB LCKW 3/8 STD. PLATED EA AB P/NIP 1/8X9"L Threaded both ends EA AB 1/8" NPT SQHDPLG EA A G28 BRKT WCA KB EA FK HHCS 3/4-10X2-1/2 PLTD EA A CONDUIT BOX, E EA Page 5 of 13

6 Parts List (continued) Part Number Description Quantity A +C/BOX CVR, PAINTED EA G GASK, LAC FT A GASKET, TERBD EA A GASK EA DK HHCS 1/2-13X1 PLATED EA D T/LUG #4AWG-1/0AWG W/HOLE FOR.250 BOLT EA LB HHTTS 1/4-20X3/4 PLTD EA A PLUG - FAN COVER EA LB HHTTS 1/4-20X1/2 PLTD EA RY TACH & HARDWARE KIT EA EA DRSCR #6-1/4 304 S.S EA KA 7/8 SQ X 6.75 KEY EA A ALFTG 1/8" 1610-BL EA AB 1/8" NPT SQHDPLG EA AB PPLG 1/4" PLTD EA AB PPLG 3/4 PLATED EA G RETAIN RING EA BK HHCS 5/16-18X1/2 PLATED EA A ALFTG 1/8" 1610-BL EA A CPLG 1/8 HEX TYPE EA BK HHCS 5/16-18X3/4 PLATED EA A THERMAL BARRIER -- G28 -- BRACKET MTD EA AB LCKW 5/16 STD. PLATED EA AB PPLG 1/4" PLTD EA Page 6 of 13

7 AB P/NIP 1/8X5-1/2L GALV EA LA SOCKET SET SCREW EA FF N/P EA FRAME 60 X EA Page 7 of 13

8 xt Product Information Packet: ZDVSM4406T-4-150HP, RPM,3PH,60-90HZ,444T,A440 REL S.O. FRAME HP BASE SPEED PHASE/HERTZ BASE SPEED MAX SPEED MIN SPEED NO LOAD 1/4 1/2 3/4 FULL LOAD REMARKS: O/L - VOLTS 460 ENCLOSURE TEFC WYE CONN EQ CKT OHMS PER PHASE 445T AMPS 177 MAX SAFE RPM 3600 (AT BASE RATING, 25 C) 150 DUTY CONT IM (AMPS) 66.6 R X S.F P.F.@NL/FL.071/.835 R X /60 AMB C/INSUL 40/F WK 2 (Lb-Ft 2 ) 51.6 XM 3.14 RPM TYPICAL DATA VECTOR PWM INVERTER DUTY RATED FULL LOAD DATA HP TORQUE LB-FT FUND VOLTS FREQ-HZ RPM LOAD PERFORMANCE AT BASE SPEED HP TORQUE LB-FT FUND VOLTS FREQ-HZ AMPS AMPS Page 8 of 13 C/R DR. BY CK. BY APP. BY DATE A-C MOTOR M. ORDERS J. TSAO J. TSAO PERFORMANCE A44WG0183-R001 10/27/00 ISSUE DATE 06/05/15 DATA Printed on 6/5/15 bengap01

9 xt Product Information Packet: ZDVSM4406T-4-150HP, RPM,3PH,60-90HZ,444T,A440 REL S.O. - VOLTS 460 ENCLOSURE TEFC WYE CONN EQ CKT OHMS PER PHASE FRAME 445T AMPS 177 MAX SAFE RPM3600 (AT BASE RATING, 25 C) HP 150 DUTY CONT IM (AMPS) 66.6 R X1.100 BASE SPEED 1790 S.F P.F.@NL/FL.071/.835 R X PHASE/HERTZ 3/60 AMB C/INSUL40/F WK 2 (Lb-Ft 2 ) 51.6 XM 3.14!#$!!#$!%&' " REMARKS:! DATA VALID FOR NAMEPLATE SPEED RANGE ONLY ) & DR. BY CK. BY APP. BY DATE ( A-C MOTOR PERFORMANCE CURVES ISSUE DATE Page 9 of 13

10 xt Product Information Packet: ZDVSM4406T-4-150HP, RPM,3PH,60-90HZ,444T,A440 REL S.O. - VOLTS 460 ENCLOSURE TEFC WYE CONN EQ CKT OHMS PER PHASE FRAME 445T AMPS 177 MAX SAFE RPM3600 (AT BASE RATING, 25 C) HP 150 DUTY CONT IM (AMPS) 66.6 R X1.100 BASE SPEED 1790 S.F P.F.@NL/FL.071/.835 R X PHASE/HERTZ 3/60 AMB C/INSUL40/F WK 2 (Lb-Ft 2 ) 51.6 XM 3.14 #$ #$ REMARKS: DATA VALID FOR NAMEPLATE SPEED RANGE ONLY %& % # %' ($ DR. BY CK. BY APP. BY DATE!" A-C MOTOR PERFORMANCE CURVES ISSUE DATE Page 10 of 13

11 F DUTY MASTER ALTERNATING CURRENT MOTORS SQUIRREL-CAGE INDUCTION F ENCLOSURE: TOTALLY ENCLOSED FRAME G445T ABOVE NEMA RATINGS COOLING: FAN COOLED MOUNTING: FOOT INCLUDES 444T FRAME MOUNTING HOLES WITH BEI HS-35 ENCODER E E D D SQ. KEY C C LEAD OPENING /16 6 HOLES B B GROUND HOLES QTY 1 1/2-13 TAP; QTY 1 3/8-16 TAP VARIES +.00,-.06 VARIES +.000,-.001 ON STANDARD MOTORS THIS IS CONDUIT SIZE. ON XT AND CORROSION PROOF MOTOR THIS IS PIPE TAP. MOTOR WEIGHTS MAY VARY BY 15% DEPENDING ON RATING. OBSTRUCTION MUST NO ENCROACH ON AIR INLET 5 WEIGHT (LBS): 2130 DRIVE END AIR DEFLECTOR IS ONLY INCLUDED WHEN NECESSARY. A SHEET NUMBER 1 OF CONDUIT BOX LOCATED ON OPPOSITE SIDE WHEN F-2. IF MOUNTING CLEARANCE DETAILS ARE REQUIRED, CONSULT FACTORY. MAXIMUM PERMISSIBLE SHAFT RUNOUT WHEN MEASURED AT END OF STANDARD SHAFT EXTENSION IS.003" T.I.R. TO 5 INCH DIA DIMENSIONS ARE IN INCHES; SEE SHEET 2 FOR DIMENSIONS IN MILLIMETERS CUSTOMER IS RESPONSIBLE FOR DETERMINING THAT MOTOR PERFORMANCE IS SUITABLE IN THE APPLICATION. REV. DESC: DRAWING ERROR, CHANGED C/BOX LEAD OUT DIM. TO 3.00 REV: A VERSION: 01 REVISED: 07:44:27 09/17/2015 TDR: MODEL NO REF: G445T/444T STD FOOTED SIDE/CENTER C/B BEI HS-35 ENCODER BY: RAGJSS1 Material: C A Page 11 of 13

12 F DUTY MASTER ALTERNATING CURRENT MOTORS SQUIRREL-CAGE INDUCTION F ENCLOSURE: TOTALLY ENCLOSED FRAME G445T ABOVE NEMA RATINGS COOLING: FAN COOLED MOUNTING: FOOT INCLUDES 444T FRAME MOUNTING HOLES WITH BEI HS-35 ENCODER E E D D SQ. KEY C C LEAD OPENING /16 6 HOLES B B GROUND HOLES QTY 1 1/2-13 TAP; QTY 1 3/8-16 TAP VARIES +.00,-.06 VARIES +.000,-.001 ON STANDARD MOTORS THIS IS CONDUIT SIZE. ON XT AND CORROSION PROOF MOTOR THIS IS PIPE TAP. MOTOR WEIGHTS MAY VARY BY 15% DEPENDING ON RATING. OBSTRUCTION MUST NO ENCROACH ON AIR INLET 5 WEIGHT (KGS): 970 DRIVE END AIR DEFLECTOR IS ONLY INCLUDED WHEN NECESSARY. A SHEET NUMBER 2 OF CONDUIT BOX LOCATED ON OPPOSITE SIDE WHEN F-2. IF MOUNTING CLEARANCE DETAILS ARE REQUIRED, CONSULT FACTORY. MAXIMUM PERMISSIBLE SHAFT RUNOUT WHEN MEASURED AT END OF STANDARD SHAFT EXTENSION IS.08 MM T.I.R. TO 127 MM DIA DIMENSIONS ARE IN MILLIMETERS; SEE SHEET 1 FOR DIMENSIONS IN INCHES CUSTOMER IS RESPONSIBLE FOR DETERMINING THAT MOTOR PERFORMANCE IS SUITABLE IN THE APPLICATION. REV. DESC: DRAWING ERROR, CHANGED C/BOX LEAD OUT DIM. TO 3.00 REV: A VERSION: 01 REVISED: 07:44:27 09/17/2015 TDR: MODEL NO REF: G445T/444T STD FOOTED SIDE/CENTER C/B BEI HS-35 ENCODER BY: RAGJSS1 Material: C A Page 12 of 13

13 Page 13 of 13