HELPING YOU TEACH TECHNOLOGY

Size: px

Start display at page:

Download "HELPING YOU TEACH TECHNOLOGY"

Laurel Montgomery
6 years ago
Views:

1 NOVABUS TRAINERS NV-1000 SERIES SPECIFICATION SHEETS HELPING YOU TEACH TECHNOLOGY

NV-1000-01B 460V HVAC MCC TRAINER The NV-1000-01B 460V Stand-Alone MCC HVAC Training Bench is a secure, fully operational system.

2 NV B 460V HVAC MCC TRAINER The NV B 460V Stand-Alone MCC HVAC Training Bench is a secure, fully operational system. Trainer allows clear visualization of all component operation of the electrically operated HVAC system. The training bench is mounted in compliance with the manufacturer s specifications and standards, and wired according to electrical diagrams. In addition to demonstrating basic system operation,trainer provides student diagnostic exercises using manually induced faults. Voltage Input: 460 VAC; 20 AC Dimensions: L 96 x W 36 x D 80 (L 240 cm x W 90 cm x D 200 cm) Weight: 1350 lb (613.6 kg) Rev. 2014/04

NV-1000-01C 460V HVAC THERMO KING TRAINER The NV-1000-01C 460V Stand-Alone Thermo

Trainer allows clear visualization of all component operation of the electrically

The training bench is mounted in compliance with the manufacturer s

In addition to demonstrating basic system operation,trainer provides student

3 NV C 460V HVAC THERMO KING TRAINER The NV C 460V Stand-Alone Thermo King HVAC Training Bench is a secure, fully operational system. Trainer allows clear visualization of all component operation of the electrically operated HVAC system. The training bench is mounted in compliance with the manufacturer s specifications and standards, and wired according to electrical dia-grams. In addition to demonstrating basic system operation,trainer provides student diagnostic exercises using manu-ally induced faults. Voltage Input: 460 VAC; 20 AC Dimensions: L 96 x W 36 x D 80 (L 240 cm x W 90 cm x D 200 cm) Weight: 1350 lb (613.6 kg) Rev. 2014/04

4 NV D 600V HVAC THERMO KING TRAINER The NV D 600V Stand-Alone Thermo King HVAC Training Bench is a secure, fully operational system. Trainer allows clear visualization of all component operation of the electrically operated HVAC system. The training bench is mounted in compliance with the manufacturer s specifications and standards, and wired according to electrical dia-grams. In addition to demonstrating basic system operation,trainer provides student diagnostic exercises using manu-ally induced faults. Voltage Input: 600 VAC; 20 AC Dimensions: L 96 x W 36 x D 80 (L 240 cm x W 90 cm x D 200 cm) Weight: 1350 lb (613.6 kg) Rev. 2014/04

NV-1000-02 COMPLETE MULTIPLEX TRAINER The NV-1000-02 Stand-Alone Multiplex Training simulator is a secure and fully operational system.

In addition to demonstrating basic system operation, the training bench enables users to practice electrical, multiplexing and J1939 CAN diagnostic procedures.

5 NV COMPLETE MULTIPLEX TRAINER The NV Stand-Alone Multiplex Training simulator is a secure and fully operational system. Trainer displays every component of the network communication system. In addition to demonstrating basic system operation, the training bench enables users to practice electrical, multiplexing and J1939 CAN diagnostic procedures. The training bench is mounted in compliance with the manufacturer s specifications and standards, and wired according to OEM electrical diagrams. It allows the user to see and have easy access to all the bus multiplexing components. This simulator can be updated with new bus programs. Voltage Input: 120 VAC; 15 AC Dimensions: L 98 x W 26 x D 78 (L 245 cm x W 65 cm x D 195 cm) Weight: 380 lb (172.7 kg) Rev. 2014/02

NV-1000-03 SUITCASE MULTIPLEXING TRAINER The NV-1000-03 is a self-contained full-functional multiplexing system which functions similarly to a Nova bus vehicle.

6 NV SUITCASE MULTIPLEXING TRAINER The NV is a self-contained full-functional multiplexing system which functions similarly to a Nova bus vehicle. A sampling of bus operations including selected inputs and outputs are designed into this simulator. The simulator comes pre-loaded with troubleshooting scenarios that actively involve technicians in the electrical multiplexing problem solving process. Voltage Input: 120 VAC; 15 AC Dimensions: L 32 x W 21 x D 13 (L 80 cm x W 52.5 cm x D 32.5 cm) Weight: 40 lb (18.2 kg) Rev. 2014/02

NV-1000-05 HYBRID TRAINER The NV-1000-05 Hybrid Trainer allows instructors to demonstrate the operation of a complete hybrid drivetrain.

A battery voltage indicator displays when battery is in load or in regeneration.

The trainer has a cutaway view of the EV drive transmission that assists in the explanation of the planetary gearset, MG1, M2 and the ICE all work together for

7 NV HYBRID TRAINER The NV Hybrid Trainer allows instructors to demonstrate the operation of a complete hybrid drivetrain. Students can visualize all EV drive components speed in real time for all modes of operation. A battery voltage indicator displays when battery is in load or in regeneration. Students can see the high voltage safety system that opens a relay which disconnects the HV battery whenever any access cover is opened. The trainer has a cutaway view of the EV drive transmission that assists in the explanation of the planetary gearset, MG1, M2 and the ICE all work together for variable torque and speed at the drive wheels. The trainer demonstrates the operation of both transmission clutches as the bus accelerates and decelerates. Students can visualize all interaction between modules included with the EV drive system. Voltage Input: 120 VAC; 15 AC Dimensions: L 50 x W 26 x D 72 (L 125 cm x W 65 cm x D 180 cm) Weight: 150 lb (68.2 kg) Rev. 2014/02

NV-1000-07 AIR BRAKE TRAINER NON CONTRACTUAL PICTURE 40 TRAINER INCLUDES 2 PANELS 60 TRAINER INCLUDES 3 PANELS The NV-1000-07 Air Brake Trainer consists of Bendix and WABCO brake products including

Motor / tooth wheel speeds are regulated by an electronic controller to simulate ABS stop and traction control events. An engine simulator is installed for proper operation of the ATC function.

8 NV AIR BRAKE TRAINER NON CONTRACTUAL PICTURE 40 TRAINER INCLUDES 2 PANELS 60 TRAINER INCLUDES 3 PANELS The NV Air Brake Trainer consists of Bendix and WABCO brake products including the WABCO ABS/ATC bus system. The valves and air system are completely functional and typical of the bus. Tooth wheels for the ABS sensors will be mounted on 12 VDC motors. Motor / tooth wheel speeds are regulated by an electronic controller to simulate ABS stop and traction control events. An engine simulator is installed for proper operation of the ATC function. Over 20 ABS / ATC faults are inserted by fault switches mounted on the rear of the display. Voltage Input: 120 VAC; 15 AC Air Input: Standard ¼ air fitting 120 psi Dimensions: L 80 x W 79 x D 28 (L 200 cm x W cm x D 70 cm) Weight: 400 lb (181.8 kg) Rev. 2014/04

NV-1000-08 RAMP SYSTEM TRAINER The NV-1000-08 Ramp System Trainer includes all the

Students will be able to visualize component function, perform adjustments and

The ramp is cutaway to show the cylinder and sensors operation.

hardware as is used in a bus. Hydraulic unit with directional and adjustment valves.

9 NV RAMP SYSTEM TRAINER The NV Ramp System Trainer includes all the components necessary to demonstrate the operation of a complete ramp system. Students will be able to visualize component function, perform adjustments and perform system testing. The ramp is cutaway to show the cylinder and sensors operation. The trainer Includes the following components: Ramp with same components and hardware as is used in a bus. Hydraulic unit with directional and adjustment valves. Electrical controls. Voltage Input: 120 VAC; 15 AC (standard electrical outlet) Dimensions: L 80 x W 42 x D 43 (L 200 cm x W 105 cm x D cm) Weight: 360 lb (163.6 kg) Rev. 2014/02

NV-1000-09 BUS DOOR TRAINER The NV-1000-09 Door Bus Trainer includes all the components required to demonstrate the

Students will be able to visualize component function in a safe classroom environment.

The doors are mounted on a movable frame that allows access to components for inspection and service.

APC system; Controls and emergency dump valves.

10 NV BUS DOOR TRAINER The NV Door Bus Trainer includes all the components required to demonstrate the operation of a complete door operation with ActiveAir, Class system and APC systems. Students will be able to visualize component function in a safe classroom environment. They will also be able to perform door adjustment, and testing on the Class and APC systems. The doors are mounted on a movable frame that allows access to components for inspection and service. The trainer Includes the following components: Door panels with same adjustment hardware as in a bus; ActivAir, Class and APC system; Controls and emergency dump valves. Voltage Input: 120 VAC; 15 AC (standard electrical outlet) Air Input: Standard ¼ air fitting 120 psi Dimensions: L 66 x W 53 x D 96 (L 165 cm x W cm x D 240 cm) (w/door in horizontal position) L 66 x W 53 x D 68 (L 165 cm x W cm x D 170 cm) (w/door in vertical position) Weight: 425 lb (193.2 kg) Rev. 2014/04

NV-1000-10 FIRE SUPPRESSION TRAINER The NV-1000-10 Fire Suppression Trainer ncludes all the components

Students will be able to visualize component function, make adjustments, and perform system testing.

is used in a bus; Control unit and manual switch; Nozzles, thermal sensors and end of line module.

11 NV FIRE SUPPRESSION TRAINER The NV Fire Suppression Trainer ncludes all the components necessary for the demonstration of the operation of a complete fire suppression system. Students will be able to visualize component function, make adjustments, and perform system testing. The trainer Includes the following components: Fire suppression system with same components and hardware as is used in a bus; Control unit and manual switch; Nozzles, thermal sensors and end of line module. Voltage Input: Dimensions: Weight: 120 VAC; 15 AC (standard electrical outlet) L 72 x W 26 x D 66 (L 180 cm x W 65 cm x D 165 cm); 180 lb (81.8 kg) Rev. 2014/04

NV-1000-11 DESTINATION SIGN TRAINER The NV-1000-11 Destination Sign Trainer includes all the necessary to

Students will be able to visualize component function, perform adjustments, and practice system testing.

bus. Control unit with usb port for destination message download.

12 NV DESTINATION SIGN TRAINER The NV Destination Sign Trainer includes all the necessary to demonstrate the operation of a bus destination sign system. Students will be able to visualize component function, perform adjustments, and practice system testing. The trainer Includes the following components: Front, side and rear destination sign with same hardware as in a bus. Control unit with usb port for destination message download. Compatible with RS-232, J-1708, RS-485 and J Power supply. Voltage Input: 120 VAC; 15 AC (standard electrical outlet) Dimensions: L 72 x W 26 x D 72 (L 180 cm x W 65 cm x D 180 cm) Weight: 180 lb (81.8 kg) Rev. 2014/02

NV-1000-12 ARTICULATION CONTROL TRAINER The NV-1000-12 is a self-contained full-functional articulation control system for Nova bus vehicle. The Hübner HNG 15.

An electronic control unit detects the operating conditions, controls driving performance and allows early fault diagnostics. The system includes fault insertion.

13 NV ARTICULATION CONTROL TRAINER The NV is a self-contained full-functional articulation control system for Nova bus vehicle. The Hübner HNG 15.3 articulation system was specially-designed for low-floor buses. Its main components are the articulation, the control system and the damping system. An electronic control unit detects the operating conditions, controls driving performance and allows early fault diagnostics. The system includes fault insertion. To use the simulator, remove the top, then plug the power cord into a standard 120V 15A outlet. Voltage Input: 120 VAC; 15 AC (standard electric outlet) Dimensions: L 32 x W 21 x D 13 (L 80 cm x W 52.5 cm x D 32.5 cm) Weight: 60 lb (27.3 kg) Rev. 2014/04

4210 Jean-Marchand Street Quebec City, PQ Canada G2C 1Y6 Phone: 1-800-567-0791 (Canada & USA)

14 4210 Jean-Marchand Street Quebec City, PQ Canada G2C 1Y6 Phone: (Canada & USA) (USA) (Canada) Fax: Internet:

TRAINING SIMULATORS. HANDS-ON-TOOLS to facilitate learning

TRAINING SIMULATORS. HANDS-ON-TOOLS to facilitate learning S HANDS-ON-TOOLS to facilitate learning Available Simulators Multiplex Training Simulator Model 1 Full System Multiplex Training Simulator Model 2 Thermo King system Training Simulator Full Pneumatic Braking