6081 Pneumatics Training System
|
|
- Debra Burns
- 5 years ago
- Views:
Transcription
1 6081 Pneumatics Training System LabVolt Series Datasheet Festo Didactic en 220 V - 50 Hz 03/2018
2 Table of Contents General Description 2 Innovative design 3 Virtual Laboratory Equipment 3 Courseware 3 elearning Systems 4 Topic Coverage 4 Features & Benefits 4 List of Available Training Systems 5 Optional Equipment 5 Optional Manual(s) 6 Available Training Systems 6 Equipment Description 26 Optional Equipment Description 65 General Description The Pneumatics Training System is part of a modular program in pneumatics and its applications. The Pneumatics Training System answers the needs of students in technical institutes, vocational colleges, and university engineering departments, as well as in industry. The training system encourages hands-on learning and is a great addition to any hydraulics and pneumatics lab. The pneumatics training program is divided into the following subsystems: Pneumatics Fundamentals, Electrical Control of Pneumatic Systems, Pneumatics Applications PLC (programmable logic controller), Troubleshooting Pneumatic Circuits, Servo Control of Pneumatic Systems, and Sensors. In Pneumatics Fundamentals, students are introduced to the basic principles and components of pneumatics. Electrical Control of Pneumatic Systems covers electrical control of pneumatic systems with ladder diagrams. Pneumatics Applications PLC expands upon the others with pneumatics applications controlled by PLCs. In Servo Control of Pneumatic Systems, students are introduced to servo-controlled pneumatic systems and their associated circuitry. In Troubleshooting Pneumatic Circuits, students develop their skills in troubleshooting. In Sensors, students are introduced to the operating characteristics of six types of photoelectric and proximity sensors. Most electrical components of the Electrical Control of Pneumatic Systems can be used with the Hydraulics Training Systems, Series 6080, allowing interconnection of the systems to perform more complete functions. 2 Festo Didactic
3 Innovative design Engineered for extreme ease of use, the basic system comes with a work surface assembly consisting of a solid metal, universal drip-tray hinged to a perforated, tiltable work surface on which pneumatic components can be mounted. The work surface can be configured to accommodate a wide variety of space and teaching needs. Lying flat over the drip tray, or tilted at 45, the work surface provides a large area on which pneumatic components and space-expanding work surfaces can be mounted at any location, either at 0 or 90. Mounting and removing components is especially easy with the quick-lock system that secures the component base plate to the work surface. Although the system is designed to operate atop a regular work table, an optional bench is available to provide mobility and storage space. Mounted on four heavy-duty, swivelling, lockable castors, the bench provides shelving for extra work surfaces and components. Optional dressing panels are also available to fully enclose the bench and provide storage area for components. The work surfaces may also be linked together for more complete electro-pneumatic/hydraulic circuits. By utilizing the optional work surfaces, exercise setups can be saved. Two student groups can simultaneously work on a bench when the Work Surface (Dual A-Frame), , is used. All components meet industrial safety standards, are identified with the proper ANSI symbol, and are equipped with quick-connect fittings. Virtual Laboratory Equipment All components contained in the Pneumatics Fundamentals and Electrical Control of Pneumatic Systems can be simulated using the Windows -based Pneumatics Simulation Software (LVSIM -PNEU), The simulated components can be interconnected and their operation studied, using the same courseware as that used for the real equipment. Courseware The courseware consists of a student manual for each training system. The student manuals are divided into several units, each consisting of a series of hands-on exercises dealing with one of the pneumatics fields. Each exercise provides a clearly stated objective, a discussion, textbook references, a summary of the exercise procedure, a detailed exercise procedure, a conclusion, and a set of review questions. A ten-question test at the end of each unit allows students to verify what was learned in the unit. Refer to the tables of contents of the manuals for a list of the topics covered in the student manuals. The instructor guides contain the measurement results as well as the answers for each hands-on exercise of the student manuals, and the answers to the unit test questions. The courseware also includes a reference textbook, optional instructional DVDs, and courseware figures. These figures are available in the form of transparencies and on CD-ROM. Furthermore, all student manuals and instructor guides are available, as an option, in Job Sheet format. Festo Didactic 3
4 elearning Systems The courseware is also available in three elearning formats for users who prefer a computer-based approach: eseries, facilitated by the Mind-Sight elearning System. See Pneumatics Fundamentals eseries, 6486-E, and Advanced Hydraulics eseries, SCORM-based, designed to be hosted by a third-party, SCORM 1.2 compliant Management System. See Pneumatics Fundamentals SCORM, 6486-F, and Advanced Pneumatics SCORM, Stand-alone, available on CD-ROM. This format runs on a web browser and does not require any management system. See Pneumatics Fundamentals Stand-Alone, 6486-G, and Advanced Pneumatics Stand-Alone, Topic Coverage Introduction to Pneumatics (components, circuits, laws) Electrical Control of Pneumatic Systems PLC-Controlled Pneumatic Applications Servo Control of Pneumatic Systems Sensors Troubleshooting Estimated Program Duration: 100 hours Features & Benefits Equipment Many work surface options, including an A-Frame top to allow experiments on both sides Lockable storage available 4 Festo Didactic
5 Industrial-grade components pre-labeled with appropriate circuit symbols, providing learning reinforcement Repositionable components build a foundation of knowledge one device at a time, making it easier to teach circuit assembly Teachers can create their own circuits to reproduce specific pneumatic applications Pneumatic trainer engineered for extreme ease of use and durability Exceeds industrial safety standards Faulty component package for real-world troubleshooting Curriculum Innovative approach that allows interconnection with other products, such as hydraulics, sensors, PLCs, robots, etc. DVDs and transparencies are available to enhance student learning Curriculum available in standard student activity manuals or in job-sheet format (closely representing what a student will see in industry), in PDF format on CD-ROM as a site license. A one-time purchase with no annual renewal fee allows unlimited printing A simulation software program that mirrors 100% of the curriculum Realistic faulty component package instead of a simulated fault approach List of Available Training Systems 1 Pneumatics Fundamentals Electrical Control of Pneumatic Systems Servo Control of Pneumatic Systems Pneumatics Fundamentals (Add-On) Pneumatics Fundamentals (with Standard Bench, Unassembled) 6081-A0 1 Pneumatics Fundamentals (with Lockable Bench, Unassembled) 6081-B0 1 Pneumatics Fundamentals (with Lockable Bench, Assembled) 6081-C0 1 Pneumatics Fundamentals (with Lockable Bench, A-Frame, Unassembled) 6081-D0 1 Pneumatics Fundamentals (with Lockable Bench, A-Frame, Assembled) 6081-E0 1 Troubleshooting Pneumatic Circuits 6081-F0 1 Hydraulics and Pneumatics Applications PLC (Allen Bradley) Sensors Training System Optional Equipment 1 1 Extended Warranty for the Pneumatics Training System 6081-EW 1 Work Surface (A-Frame) Expanding Work Surface (Large) Expanding Work Surface (Small) Bench (Unassembled) Dressing Panels (with Lockable Front Door) 6303-A0 1 Bench (Assembled) 6303-B0 1 Bench (with Dressing Panels and Lockable Front Door, Assembled) 6303-C0 1 Bench (with Dressing Panels and Lockable Doors, Assembled) 6303-D0 1 Price can be calculated as follows: for 1 additional year *7% of total net, for 2 additional years *12% of total net and for 3 additional years *15% of total net. For details and options, contact services.didactic@festo.com. Festo Didactic 5
6 1 Bench (with Dressing Panels and Lockable Doors, Unassembled) 6303-E0 1 Storage/Work Surface Air Compressor 6410-B5 1 Directional Control Valve (Roller-Lever Operated) Advanced Pneumatics - eseries Pneumatics Fundamentals - eseries 6486-E0 1 Instructional DVD - Introduction to Fluid Power Instructional DVD - Fluid Power Technology at Work Instructional DVD - Pumps, Lines, Filters Instructional DVD - Control Mechanisms Instructional DVD - Actuators Optional Manual(s) 1 Pneumatics Manuals in Exercise Format (Manuals on CD-ROM) A0 1 Pneumatics Fundamentals (Courseware Figures on Transparencies) M0 1 Electrical Control of Pneumatic Systems (Courseware Figures on Transparencies) M0 1 Pneumatics Applications PLC (Student Manual) M0 1 Servo Control of Pneumatic Systems (Student Manual) M0 1 Sensors (Student Manual) M0 1 Courseware figures on CD-ROM Pneumatics Training System (all subsystems) (Student Manual) M0 1 Pneumatics Manuals in Job Sheet Format (Manuals on CD-ROM) A0 Available Training Systems Pneumatics Fundamentals The Pneumatics Fundamentals training system introduces students to the basic principles and components of pneumatics. No air compressor is supplied with the training system. Refer to the training system specifications for the compressed air supply requirements. All components in this training system can be simulated using the Windows - based Pneumatics Simulation Software (LVSIM -PNEU), The simulated components can be interconnected and their operation studied using the same courseware as that used for the real equipment. The courseware is also available in elearning format for users who prefer computer-based approach. 2 Can be used to supply compressed air to the Pneumatics Training Systems. 6 Festo Didactic
7 List of Equipment 1 Work Surface Conditioning Unit Accumulator Vacuum Generator Directional Control Valve (3/2-Way Push-Button Valve) Flow Control Valve Directional Control Valve (5/2-Way Double-Pilot Valve) Single-Acting Cylinder Double-Acting Cylinder Bidirectional Motor Air Bearing Pressure Gauge Flowmeter Loading Device Tees Tubing and Accessories Long Line List of Manuals Manual Description Pneumatics Fundamentals (Student Manual) Pneumatics (Instructor Guide) Industrial Pneumatic Technology (Student Manual) Table of Contents of the Manual(s) Pneumatics Fundamentals (Student Manual) ( ) 1-1 Familiarization with the Lab-Volt Pneumatics Trainer 1-2 Introduction to Pneumatics 1-3 Air Conditioning and Distributing Equipment 2-1 Pressure vs Force Relationship 2-2 Pressure vs Volume Relationship 2-3 Pressure Drop vs Flow Relationship 2-4 Vacuum Generation 3-1 Directional Control Valves 3-2 Directional and Speed Control of Cylinders 3-3 Cylinders in Series 3-4 Cylinders in Parallel 4-1 Indirect Control Using Pilot-Operated Valves 4-2 Pneumatic Motor Circuits 4-3 Pneumatic Motor Performance Additional Equipment Required to Perform the Exercises Festo Didactic 7
8 1 3 Training on Pneumatics Fundamentals, 1.1 days TF Optional Equipment 1 4 Installation and Commissioning of a System IC System Compressed Air Supply Requirements Flow Rate Pressure Required Space (H x W x D) 90 L/min (3.2 SCFM) approx. 630 kpa (90 psi) approx x 1800 x 1500 mm (60 x 72 x 60 in) 29.4 kg (64.5 lb) Electrical Control of Pneumatic Systems The training system Electrical Control of Pneumatic Systems introduces students to the electrical control of pneumatic systems. Most of the electrical components of this training system can also be used with the Hydraulics Training Systems, Series 6080, allowing interconnection of both systems to perform more complete functions. All components in this training system can be simulated using the Windows - based Pneumatics Simulation Software (LVSIM -PNEU), The simulated components can be interconnected and their operation studied using the same courseware as that used for the real equipment. The courseware is also available in elearning format for users who prefer a computer-based approach. List of Equipment 1 Expanding Work Surface (Large) DC Power Supply 6360-A5 2 Push-Button Station Limit-Switch Assembly Optional product training. Price provided on demand. For details and options, contact services.didactic@festo.com. 4 Installation and basic commissioning of the equipment in your classroom. Installer fees (flight, accommodation...) must be added to the price. The product (box(es) and/or pallet(s)) must already be in the classroom or extra charges will apply. For details or other options, contact "training.didactic.ca@festo.com". 8 Festo Didactic
9 2 Relay Time-Delay Relay / Counter Pilot-Lamp Station Magnetic Proximity Switch Diffuse Reflective Photoelectric Switch Multimeter 6394-A0 1 Directional Control Valve (5/3-Way Double-Solenoid Valve) Single Solenoid-Actuated Directional Control Valve AND Function Valve (Dual-Pressure Valve) Shuttle Valve (OR Function Valve) Quick Exhaust Valve Pressure Regulator Pressure Switch Tees Connection Leads (4 Lengths) 6491-A0 Manual Manual Description Electrical Control of Pneumatic Systems (Student Manual) Table of Contents of the Manual(s) Electrical Control of Pneumatic Systems (Student Manual) ( ) 1-1 Familiarization with the Equipment 2-1 Basic Electricity 2-2 Ladder Diagrams 2-3 Basic Electrically Controlled Pneumatic Circuits 2-4 Basic AND and OR Logic Function Circuits 3-1 Basic Memory and Priority Electropneumatic Circuits 3-2 Multi-Pressure Systems 3-3 Sequencing Pneumatic Circuits 3-4 Time-Delay Electropneumatic Applications 4-1 Pneumatic Actuator Deceleration Circuits 4-2 Counting of Actuator Cycles 4-3 Industrial Drilling System and Safety Circuits 4-4 Garbage Compactor Simulation Circuit 5-1 Troubleshooting Electrical Control Circuits 5-2 Troubleshooting Electrically Controlled Pneumatic Systems Optional Equipment 1 Installation and Commissioning of a System IC 5 5 Installation and basic commissioning of the equipment in your classroom. Installer fees (flight, accommodation...) must be added to the price. The product (box(es) and/or pallet(s)) must already be in the classroom or extra charges will apply. For details or other options, contact "training.didactic.ca@festo.com". Festo Didactic 9
10 System Required Space (H x W x D) No additional floor space required 14.8 kg (32.6 lb) Servo Control of Pneumatic Systems The training system Servo Control of Pneumatic Systems introduces students to servo-controlled pneumatic systems and their associated circuitry. The training system courseware is also available in elearning format for users who prefer a computer-based approach. List of Equipment 1 Signal Conditioners PID Controller Position Transducer Servo Control Valve Proportional Control Valve (3/2-Way Single-Pilot Valve) Pressure Transducer Muffler Manual Manual Description Servo Control of Pneumatic Systems (Student Manual) Table of Contents of the Manual(s) Servo Control of Pneumatic Systems (Student Manual) ( ) 1 Introduction to Servo Control Valves 2 Acceleration and Deceleration Control 3 Open-Loop Position Control 4 Closed-Loop Position Control, Proportional Mode 5 Closed-Loop Position Control, Proportional-Plus-Integral Mode 6 Open-Loop Speed Control 7 Closed-Loop Speed Control, Proportional-Plus-Integral-Plus-Derivative Mode 8 Closed-Loop Pressure Control, Proportional-Plus-Integral Mode Additional Equipment Required to Perform the Exercises 10 Festo Didactic
11 1 6 Training on Servo Control of Pneumatic Systems, 0.5 day TF Optional Equipment 1 7 Installation and Commissioning of a System IC System Required Space (H x W x D) No additional floor space required 8.5 kg (18.7 lb) Pneumatics Fundamentals (Add-On) The Pneumatics Fundamentals (Add-On) training system introduces students to the basic principles and components of pneumatics. This training system is similar to , but does not include the Work Surface, All components in this training system can be simulated using the Windows -based Pneumatics Simulation Software (LVSIM -PNEU), The simulated components can be interconnected and their operation studied using the same courseware as that used for the real equipment. The courseware is also available in elearning format for users who prefer a computer-based approach. List of Equipment 1 Storage/Work Surface Conditioning Unit Accumulator Vacuum Generator Directional Control Valve (3/2-Way Push-Button Valve) Flow Control Valve Directional Control Valve (5/2-Way Double-Pilot Valve) Single-Acting Cylinder Double-Acting Cylinder Bidirectional Motor Air Bearing Pressure Gauge Flowmeter Loading Device Tees Tubing and Accessories Optional product training. Price provided on demand. For details and options, contact services.didactic@festo.com. 7 Installation and basic commissioning of the equipment in your classroom. Installer fees (flight, accommodation...) must be added to the price. The product (box(es) and/or pallet(s)) must already be in the classroom or extra charges will apply. For details or other options, contact "training.didactic.ca@festo.com". Festo Didactic 11
12 1 Long Line List of Manuals Manual Description Pneumatics Fundamentals (Student Manual) Pneumatics (Instructor Guide) Industrial Pneumatic Technology (Student Manual) Table of Contents of the Manual(s) Pneumatics Fundamentals (Student Manual) ( ) 1-1 Familiarization with the Lab-Volt Pneumatics Trainer 1-2 Introduction to Pneumatics 1-3 Air Conditioning and Distributing Equipment 2-1 Pressure vs Force Relationship 2-2 Pressure vs Volume Relationship 2-3 Pressure Drop vs Flow Relationship 2-4 Vacuum Generation 3-1 Directional Control Valves 3-2 Directional and Speed Control of Cylinders 3-3 Cylinders in Series 3-4 Cylinders in Parallel 4-1 Indirect Control Using Pilot-Operated Valves 4-2 Pneumatic Motor Circuits 4-3 Pneumatic Motor Performance Additional Equipment Required to Perform the Exercises 1 8 Training on Pneumatics Fundamentals, 1.1 days TF Optional Equipment 1 9 Installation and Commissioning of a System IC System Required Space (H x W x D) No additional floor space required TBE 8 Optional product training. Price provided on demand. For details and options, contact services.didactic@festo.com. 9 Installation and basic commissioning of the equipment in your classroom. Installer fees (flight, accommodation...) must be added to the price. The product (box(es) and/or pallet(s)) must already be in the classroom or extra charges will apply. For details or other options, contact "training.didactic.ca@festo.com". 12 Festo Didactic
13 Pneumatics Fundamentals (with Standard Bench, Unassembled) 6081-A0 The Pneumatics Fundamentals (with Standard Bench, Unassembled) training system introduces students to the basic principles and components of pneumatics. This training system includes the same components as , with the addition of an unassembled bench and two storage/work surfaces. All components in this training system can be simulated using the Windows - based Pneumatics Simulation Software (LVSIM -PNEU), The simulated components can be interconnected and their operation studied using the same courseware as that used for the real equipment. The courseware is also available in elearning format for users who prefer computer-based approach. List of Equipment 1 Work Surface Bench (Unassembled) Storage/Work Surface Conditioning Unit Accumulator Vacuum Generator Directional Control Valve (3/2-Way Push-Button Valve) Flow Control Valve Directional Control Valve (5/2-Way Double-Pilot Valve) Single-Acting Cylinder Double-Acting Cylinder Bidirectional Motor Air Bearing Pressure Gauge Flowmeter Loading Device Tees Tubing and Accessories Long Line List of Manuals Manual Description Pneumatics Fundamentals (Student Manual) Pneumatics (Instructor Guide) Industrial Pneumatic Technology (Student Manual) Festo Didactic 13
14 Table of Contents of the Manual(s) Pneumatics Fundamentals (Student Manual) ( ) 1-1 Familiarization with the Lab-Volt Pneumatics Trainer 1-2 Introduction to Pneumatics 1-3 Air Conditioning and Distributing Equipment 2-1 Pressure vs Force Relationship 2-2 Pressure vs Volume Relationship 2-3 Pressure Drop vs Flow Relationship 2-4 Vacuum Generation 3-1 Directional Control Valves 3-2 Directional and Speed Control of Cylinders 3-3 Cylinders in Series 3-4 Cylinders in Parallel 4-1 Indirect Control Using Pilot-Operated Valves 4-2 Pneumatic Motor Circuits 4-3 Pneumatic Motor Performance Additional Equipment Required to Perform the Exercises 1 10 Training on Pneumatics Fundamentals, 1.1 days TF Optional Equipment 1 11 Installation and Commissioning of a System IC System Compressed Air Supply Requirements Flow Rate Pressure Required Space (H x W x D) 90 L/min (3.2 SCFM) approx. 630 kpa (90 psi) approx x 1800 x 1500 mm (60 x 70.9 x 59.1 in) TBE 10 Optional product training. Price provided on demand. For details and options, contact services.didactic@festo.com. 11 Installation and basic commissioning of the equipment in your classroom. Installer fees (flight, accommodation...) must be added to the price. The product (box(es) and/or pallet(s)) must already be in the classroom or extra charges will apply. For details or other options, contact "training.didactic.ca@festo.com". 14 Festo Didactic
15 Pneumatics Fundamentals (with Lockable Bench, Unassembled) 6081-B0 The Pneumatics Fundamentals (with Lockable Bench, Unassembled) training system introduces students to the basic principles and components of pneumatics. This training system includes the same components as , with the addition of an unassembled bench with dressing panels and lockable doors, and two storage/work surfaces. All components in this training system can be simulated using the Windows -based Pneumatics Simulation Software (LVSIM -PNEU), The simulated components can be interconnected and their operation studied using the same courseware as that used for the real equipment. The courseware is also available in elearning format for users who prefer a computer-based approach. List of Equipment 1 Work Surface Bench (Unassembled) Dressing Panels (with Lockable Front Door) 6303-A0 2 Storage/Work Surface Conditioning Unit Accumulator Vacuum Generator Directional Control Valve (3/2-Way Push-Button Valve) Flow Control Valve Directional Control Valve (5/2-Way Double-Pilot Valve) Single-Acting Cylinder Double-Acting Cylinder Bidirectional Motor Air Bearing Pressure Gauge Flowmeter Loading Device Tees Tubing and Accessories Long Line Festo Didactic 15
16 List of Manuals Manual Description Pneumatics Fundamentals (Student Manual) Pneumatics (Instructor Guide) Industrial Pneumatic Technology (Student Manual) Table of Contents of the Manual(s) Pneumatics Fundamentals (Student Manual) ( ) 1-1 Familiarization with the Lab-Volt Pneumatics Trainer 1-2 Introduction to Pneumatics 1-3 Air Conditioning and Distributing Equipment 2-1 Pressure vs Force Relationship 2-2 Pressure vs Volume Relationship 2-3 Pressure Drop vs Flow Relationship 2-4 Vacuum Generation 3-1 Directional Control Valves 3-2 Directional and Speed Control of Cylinders 3-3 Cylinders in Series 3-4 Cylinders in Parallel 4-1 Indirect Control Using Pilot-Operated Valves 4-2 Pneumatic Motor Circuits 4-3 Pneumatic Motor Performance Additional Equipment Required to Perform the Exercises 1 12 Training on Pneumatics Fundamentals, 1.1 days TF Optional Equipment 1 13 Installation and Commissioning of a System IC System Compressed Air Supply Requirements Flow Rate Pressure Required Space (H x W x D) 90 L/min (3.2 SCFM) approx. 630 kpa (90 psi) approx x 1800 x 1500 mm (60 x 70.9 x 59.1 in) TBE 12 Optional product training. Price provided on demand. For details and options, contact services.didactic@festo.com. 13 Installation and basic commissioning of the equipment in your classroom. Installer fees (flight, accommodation...) must be added to the price. The product (box(es) and/or pallet(s)) must already be in the classroom or extra charges will apply. For details or other options, contact "training.didactic.ca@festo.com". 16 Festo Didactic
17 Pneumatics Fundamentals (with Lockable Bench, Assembled) 6081-C0 The Pneumatics Fundamentals (with Lockable Bench, Assembled) training system introduces students to the basic principles and components of pneumatics. This training system includes the same components as , with the addition of an assembled bench with dressing panels and lockable doors, and two storage/work surfaces. All components in this training system can be simulated using the Windows -based Pneumatics Simulation Software (LVSIM -PNEU), The simulated components can be interconnected and their operation studied using the same courseware as that used for the real equipment. The courseware is also available in elearning format for users who prefer computer-based approach. List of Equipment 1 Work Surface Bench (with Dressing Panels and Lockable Front Door, Assembled) 6303-C0 2 Storage/Work Surface Conditioning Unit Accumulator Vacuum Generator Directional Control Valve (3/2-Way Push-Button Valve) Flow Control Valve Directional Control Valve (5/2-Way Double-Pilot Valve) Single-Acting Cylinder Double-Acting Cylinder Bidirectional Motor Air Bearing Pressure Gauge Flowmeter Loading Device Tees Tubing and Accessories Long Line List of Manuals Manual Description Pneumatics Fundamentals (Student Manual) Pneumatics (Instructor Guide) Industrial Pneumatic Technology (Student Manual) Festo Didactic 17
18 Table of Contents of the Manual(s) Pneumatics Fundamentals (Student Manual) ( ) 1-1 Familiarization with the Lab-Volt Pneumatics Trainer 1-2 Introduction to Pneumatics 1-3 Air Conditioning and Distributing Equipment 2-1 Pressure vs Force Relationship 2-2 Pressure vs Volume Relationship 2-3 Pressure Drop vs Flow Relationship 2-4 Vacuum Generation 3-1 Directional Control Valves 3-2 Directional and Speed Control of Cylinders 3-3 Cylinders in Series 3-4 Cylinders in Parallel 4-1 Indirect Control Using Pilot-Operated Valves 4-2 Pneumatic Motor Circuits 4-3 Pneumatic Motor Performance Additional Equipment Required to Perform the Exercises 1 14 Training on Pneumatics Fundamentals, 1.1 days TF Optional Equipment 1 15 Installation and Commissioning of a System IC System Compressed Air Supply Requirements Flow Rate Pressure Required Space (H x W x D) 90 L/min (3.2 SCFM) approx. 630 kpa (90 psi) approx x 1800 x 1500 mm (60 x 70.9 x 59.1 in) TBE Pneumatics Fundamentals (with Lockable Bench, A-Frame, Unassembled) 6081-D0 The Pneumatics Fundamentals (with Lockable Bench, A-Frame, Unassembled) training system introduces students to the basic principles and components of pneumatics. This training system includes the same components as , with the addition of an unassembled bench with dressing panels and lockable doors, as well as two storage/work surfaces. Also, the training system includes a Work Surface (Dual A-Frame), , that replaces Optional product training. Price provided on demand. For details and options, contact services.didactic@festo.com. 15 Installation and basic commissioning of the equipment in your classroom. Installer fees (flight, accommodation...) must be added to the price. The product (box(es) and/or pallet(s)) must already be in the classroom or extra charges will apply. For details or other options, contact "training.didactic.ca@festo.com". 18 Festo Didactic
19 All components in this training system can be simulated using the Windows -based Pneumatics Simulation Software (LVSIM -PNEU), The simulated components can be interconnected and their operation studied using the same courseware as that used for the real equipment. The courseware is also available in elearning format for users who prefer a computer-based approach. List of Equipment 1 Work Surface (A-Frame) Bench (with Dressing Panels and Lockable Doors, Unassembled) 6303-E0 2 Storage/Work Surface Conditioning Unit Accumulator Vacuum Generator Directional Control Valve (3/2-Way Push-Button Valve) Flow Control Valve Directional Control Valve (5/2-Way Double-Pilot Valve) Single-Acting Cylinder Double-Acting Cylinder Bidirectional Motor Air Bearing Pressure Gauge Flowmeter Loading Device Tees Tubing and Accessories Long Line List of Manuals Manual Description Pneumatics Fundamentals (Student Manual) Pneumatics (Instructor Guide) Industrial Pneumatic Technology (Student Manual) Table of Contents of the Manual(s) Pneumatics Fundamentals (Student Manual) ( ) 1-1 Familiarization with the Lab-Volt Pneumatics Trainer 1-2 Introduction to Pneumatics 1-3 Air Conditioning and Distributing Equipment 2-1 Pressure vs Force Relationship 2-2 Pressure vs Volume Relationship 2-3 Pressure Drop vs Flow Relationship 2-4 Vacuum Generation 3-1 Directional Control Valves 3-2 Directional and Speed Control of Cylinders Festo Didactic 19
20 3-3 Cylinders in Series 3-4 Cylinders in Parallel 4-1 Indirect Control Using Pilot-Operated Valves 4-2 Pneumatic Motor Circuits 4-3 Pneumatic Motor Performance Additional Equipment Required to Perform the Exercises 1 16 Training on Pneumatics Fundamentals, 1.1 days TF Optional Equipment 1 17 Installation and Commissioning of a System IC System Compressed Air Supply Requirements Flow Rate Pressure Required Space (H x W x D) 90 L/min (3.2 SCFM) approx. 630 kpa (90 psi) approx x 1800 x 1500 mm (60 x 70.9 x 59.1 in) TBE Pneumatics Fundamentals (with Lockable Bench, A-Frame, Assembled) 6081-E0 The Pneumatics Fundamentals (with Lockable Bench, A-Frame, Assembled) training system introduces students to the basic principles and components of pneumatics. This training system includes the same components as , with the addition of an assembled bench with dressing panels and lockable doors, as well as two storage/work surfaces. Also, the training system includes a Work Surface (Dual A- Frame), , that replaces All components in this training system can be simulated using the Windows -based Pneumatics Simulation Software (LVSIM -PNEU), The simulated components can be interconnected and their operation studied using the same courseware as that used for the real equipment. 16 Optional product training. Price provided on demand. For details and options, contact services.didactic@festo.com. 17 Installation and basic commissioning of the equipment in your classroom. Installer fees (flight, accommodation...) must be added to the price. The product (box(es) and/or pallet(s)) must already be in the classroom or extra charges will apply. For details or other options, contact "training.didactic.ca@festo.com". 20 Festo Didactic
21 The courseware is also available in elearning format for users who prefer a computer-based approach. List of Equipment 1 Work Surface (A-Frame) Bench (with Dressing Panels and Lockable Doors, Assembled) 6303-D0 2 Storage/Work Surface Conditioning Unit Accumulator Vacuum Generator Directional Control Valve (3/2-Way Push-Button Valve) Flow Control Valve Directional Control Valve (5/2-Way Double-Pilot Valve) Single-Acting Cylinder Double-Acting Cylinder Bidirectional Motor Air Bearing Pressure Gauge Flowmeter Loading Device Tees Tubing and Accessories Long Line List of Manuals Manual Description Pneumatics Fundamentals (Student Manual) Pneumatics (Instructor Guide) Industrial Pneumatic Technology (Student Manual) Table of Contents of the Manual(s) Pneumatics Fundamentals (Student Manual) ( ) 1-1 Familiarization with the Lab-Volt Pneumatics Trainer 1-2 Introduction to Pneumatics 1-3 Air Conditioning and Distributing Equipment 2-1 Pressure vs Force Relationship 2-2 Pressure vs Volume Relationship 2-3 Pressure Drop vs Flow Relationship 2-4 Vacuum Generation 3-1 Directional Control Valves 3-2 Directional and Speed Control of Cylinders 3-3 Cylinders in Series 3-4 Cylinders in Parallel 4-1 Indirect Control Using Pilot-Operated Valves 4-2 Pneumatic Motor Circuits Festo Didactic 21
22 4-3 Pneumatic Motor Performance Additional Equipment Required to Perform the Exercises 1 18 Training on Pneumatics Fundamentals, 1.1 days TF Optional Equipment 1 19 Installation and Commissioning of a System IC System Compressed Air Supply Requirements Flow Rate Pressure Required Space (H x W x D) 90 L/min (3.2 SCFM) approx. 630 kpa (90 psi) approx x 1800 x 1500 mm (60 x 70.9 x 59.1 in) TBE Troubleshooting Pneumatic Circuits 6081-F0 The Troubleshooting Pneumatic Circuits training system develops the skills of students in troubleshooting using specially modified components that cause erratic operation. List of Equipment 1 Conditioning Unit (Faulty) 6411-F0 1 Accumulator (Faulty) 6412-F0 1 Vacuum Generator (Faulty) 6413-F0 1 Directional Control Valve (3/2-Way Push-Button Valve, Faulty) 6420-F0 1 Directional Control Valve (5/2-Way Double-Pilot Valve, Faulty) 6422-F0 1 Loading Device (Faulty) 6480-F0 1 Tees (Faulty) 6490-F0 18 Optional product training. Price provided on demand. For details and options, contact services.didactic@festo.com. 19 Installation and basic commissioning of the equipment in your classroom. Installer fees (flight, accommodation...) must be added to the price. The product (box(es) and/or pallet(s)) must already be in the classroom or extra charges will apply. For details or other options, contact "training.didactic.ca@festo.com". 22 Festo Didactic
23 1 Long Line (Faulty) 6492-F0 Manual Manual Description Troubleshooting Pneumatic Circuits (Instructor Guide) Optional Equipment 1 20 Installation and Commissioning of a System IC Hydraulics and Pneumatics Applications PLC (Allen Bradley) Hydraulics and Pneumatics Applications - PLC (Allen Bradley) is a subsystem of the Hydraulics and Pneumatics Training Systems, s 6080 and The subsystem introduces students to hydraulics and pneumatics applications controlled by PLCs. The system includes an Allen-Bradley PLC and Rockwell software. It also includes two student manuals: one applicable to hydraulics and one applicable to pneumatics. List of Equipment 1 PLC Software (RSLogix Micro, Educational) 3245-A0 1 Communication Cable (Allen-Bradley) Programmable Logic Controller (Allen-Bradley) List of Manuals Manual Description Hydraulics Applications - PLC (Student Manual) Pneumatics Applications PLC (Student Manual) Table of Contents of the Manual(s) Hydraulics Applications - PLC (Student Manual) ( ) 1 Programmable Logic Controller Review 2 Timer Instructions 20 Installation and basic commissioning of the equipment in your classroom. Installer fees (flight, accommodation...) must be added to the price. The product (box(es) and/or pallet(s)) must already be in the classroom or extra charges will apply. For details or other options, contact "training.didactic.ca@festo.com". Festo Didactic 23
24 3 Counter Instructions 4 Latching and Comparison Instructions 5 Time-Delay Control of Hydraulic Actuators 6 Counting of Hydraulic Actuator Cycles 7 Safety Control of Hydraulic Actuators 8 PLC-Controlled Clamp and Work System 9 Troubleshooting 10 Designing a PLC-Controlled Punching Press 11 Designing a PLC-Controlled Conveyor System 12 Designing a PLC-Controlled Die Casting Machine Pneumatics Applications PLC (Student Manual) ( ) 1 Programmable Logic Controller Review 2 Timer Instructions 3 Counter Instructions 4 Latching and Comparison Instructions 5 Time-Delay Control of Pneumatic Actuators 6 Counting of Pneumatic Actuator Cycles 7 Safety Control of Pneumatic Actuators 8 PLC-Controlled Clamp and Work System 9 Troubleshooting 10 Designing a PLC-Controlled Stamping Machine 11 Designing a PLC-Controlled Conveyor System 12 Designing a PLC-Controlled Injection Molding Machine Additional Equipment Required to Perform the Exercises 1 21 Personal Computer Training on PLC Applications, 0.8 day TF System Computer Requirements Intended Location Dimensions (H x W D) A currently available personal computer with USB 2.0 ports, running under one of the following operating systems: Windows 7 or Windows 8. Installed on the work surface of a Hydraulics Training System. TBE TBE 21 Refer to the Computer Requirements in the System section of this datasheet if the computer is to be provided by the end-user. 22 Optional product training. Price provided on demand. For details and options, contact services.didactic@festo.com. 24 Festo Didactic
25 Sensors Training System exercises in the included courseware. The Sensors Training System familiarizes students with the operation of various types of sensors. The training system is an add-on to the Electrical Control of Hydraulic Systems, , and Electrical Control of Pneumatic Systems, It does not include a work surface and the sensors must be installed on a work surface of the Hydraulics and Pneumatics Training Systems in order to perform the The system contains a selection of photoelectric, inductive, and capacitive sensors representative of what is found in the industry. The training system provides a comprehensive, high-quality, and cost-effective solution to rapidly build student knowledge in sensors. Each sensor is mounted on a flexible support attached to a metal base whose fixations can be inserted into the perforations of the trainer work surfaces. The sensor inputs and outputs are accessible through banana jacks, allowing for easy system setup. The sensors are protected against bad connections and reverse polarity, and are identified with the proper symbol on their base. All components meet industrial safety standards. A block, on which reflectors have been added, is used to observe the characteristics of each sensor. The Sensors courseware consists of a student manual and an instructor guide. The student manual is divided into seven hands-on exercises. Each exercise provides a clearly stated objective, a discussion, a summary of the exercise procedure, a detailed exercise procedure, and a conclusion. The instructor guide contains the measurement results as well as the answers for each hands-on exercise of the student manual. List of Equipment 1 Background Suppression Photoelectric Switch Polarized Retroreflective Photoelectric Switch Inductive Proximity Switch Capacitive Proximity Switch Diffuse Reflective Photoelectric Switch Fiber-Optic Photoelectric Switch Reflective Block List of Manuals Manual Description Sensors (Student Manual) Sensors (Instructor Guide) Festo Didactic 25
26 Table of Contents of the Manual(s) Sensors (Student Manual) ( ) 1 Introduction to Sensors 2 Diffuse Reflective Photoelectric Switches 3 Background Suppression Photoelectric Switches 4 Fiber-Optic Photoelectric Switches 5 Polarized Retroflective Photoelectric Switches 6 Capacitive Proximity Switches 7 Inductive Proximity Switches System Intended Location On the work surface of another training system such as the Hydraulics or Pneumatics Training Systems 555 x 290 x 202 mm (21.9 x 11.4 x 8 in) 3.8 kg (8.4 lb) Equipment Description PLC Software (RSLogix Micro, Educational) 3245-A0 The RSLogix Micro software is a tool to design and implement ladder programs for the Allen-Bradley MicroLogix family of processors (it cannot be used with SLC 500 controllers). It is a Windows -based application produced by Rockwell Software that allows PLC programming using a personal computer. The free-form ladder of RSLogix Micro lets students concentrate on the application logic rather than using the proper syntax when editing programs. Several other features of RSLogix Micro greatly facilitate PLC programming, such as a project verifier, drag-and-drop editing, and search-andreplace functions. The PLC can be programmed via either an RS-232 port or an Ethernet port on the PLC processor. This software comes with RSLinx, which provides connectivity between the PLC and the computer. The software is available with either an educational license ( 3245-A) or as a commercial license ( 3245-B). Computer Requirements A currently available personal computer with USB 2.0 ports, running under one of the following operating systems: Windows 7 or Windows Festo Didactic
27 Communication Cable (Allen-Bradley) The communication cable is an RS-232-C serial cable specifically designed to connect a personal computer to an Allen-Bradley programmable logic controller, thus making it possible to program and monitor the PLC. Communication Cable Type Length 8 pin mini DIN to 9 pin D shell 2 m (6.5 ft) Programmable Logic Controller (Allen-Bradley) The Programmable Logic Controller (Allen-Bradley) is mounted on a metal base which allows it to be clamped onto a perforated work surface. The PLC has the capacity to accept eight 24 V dc input signals from input elements, such as push buttons, limit switches, magnetic switches, and photoelectric switches. It can control up to six 24 V dc output devices, such as pilot lamps and solenoids. All PLC inputs and outputs are terminated with banana jacks to ease system setup. Features & Benefits Compact design Digital I/O: eight inputs (24 V dc) and six outputs (24 V dc) Fully configurable, integrated PID controller Form factor compatible with the perforated work surfaces of the Hydraulics and Pneumatics training systems Requires programming software, 3245-A, and communication cable, Used with the Hydraulics and Pneumatics training systems, Series 6080 and 6081, includes courseware Manufacturer Allen-Bradley CPU Type MicroLogix 1100 Festo Didactic 27
28 Power 24 V dc Discrete Inputs Quantity 10 Ratings 24 V dc Discrete Outputs Quantity, Type, and Ratings Two relay outputs Two 24 V dc FET outputs Two high-speed 24 V dc FET outputs Program Memory 4 kb Data Memory 4 kb 200 x 240 x 200 mm (7.9 x 9.4 x 7.9 in) TBE Work Surface The Work Surface consists in a solid metal, universal drip-tray hinged to a perforated, tiltable work surface on which components can be mounted. The Work Surface can be placed atop a regular work table or on an optional bench, such as the 6303, which provides mobility and storage space. Work Surface (A-Frame) x 900 x 700 mm (3 x 35.5 x 27.5 in) when the perforated work surface is lowered 16.8 kg (36.6 lb) The Work Surface (A-Frame) consists of two sloping work surfaces joined at the top and braced at their base by a universal drip tray. It allows two groups of students to connect separate circuits. It can be placed atop a regular work table or on an optional bench, such as the 6303, which provides mobility and separate storage for the components. 540 x 900 x 820 mm (21.3 x 35.5 x 32.3 in) 23.6 kg (52 lb) 28 Festo Didactic
29 Expanding Work Surface (Large) The Expanding Work Surface (Large) consists in a perforated plate that can be mounted on the main Work Surface, 6301, to increase the work area. The Expanding Work Surface (Large) is two-thirds the main Work Surface in area. 30 x 590 x 590 mm (1 x 23 x 23 in) 5.9 kg (12.8 lb) Bench (Unassembled) The Bench (Unassembled) consists of a mobile workstation on which the Work Surfaces, s 6301 and , can be mounted. Four heavyduty, swivelling, lockable casters allow the bench to be easily moved in the laboratory classroom. The bench has three pairs of side supports over which three Storage/Work Surfaces, 6309, can be slid to provide shelving for component storage. This bench variant requires assembly and does not comprise any dressing panel. Intended Location On the floor (stands on casters) 910 x 850 x 660 mm (35.8 x 33.5 x 26 in) 37.3 kg (82.5 lb) Festo Didactic 29
30 Dressing Panels (with Lockable Front Door) 6303-A0 The Dressing Panels (with Lockable Front Door) are used to fully enclose the benches, s and 6303-B. The lockable front doors consist of two hinged panels with a lock handle to secure the content of the bench. A pair of lockable side doors are provided to secure the components stored on the side shelves. Intended Location Installed on the front, rear, and sides of a Bench, or 6303-B 25.5 kg (55.9 lb) Bench (with Dressing Panels and Lockable Front Door, Assembled) 6303-C0 The Bench (with Dressing Panels and Lockable Front Door, Assembled) consists of a mobile workstation on which the Work Surfaces, s 6301 and , can be mounted. Four heavy-duty, swivelling, lockable casters allow the bench to be easily moved in the laboratory classroom. The bench has three pairs of side supports over which three Storage/ Work Surfaces, 6309, can be slid to provide shelving for component storage. This bench variant is provided already assembled and comprises dressing panels with a lockable front door. These dressing panels fully enclose the bench. The lockable front door consists of two hinged panels with a lock handle to secure the content of the bench. Intended Location On the floor (stands on casters) 910 x 850 x 660 mm (35.8 x 33.5 x 26 in) 64 kg (141 lb) 30 Festo Didactic
31 Bench (with Dressing Panels and Lockable Doors, Assembled) 6303-D0 The Bench (with Dressing Panels and Lockable Doors, Assembled) consists of a mobile workstation on which the Work Surfaces, s 6301 and , can be mounted. Four heavyduty, swivelling, lockable casters allow the bench to be easily moved in the laboratory classroom. The bench has three pairs of side supports over which three Storage/Work Surfaces, 6309, can be slid to provide shelving for component storage. This bench variant is provided already assembled and comprises dressing panels with lockable front, rear, and side doors. These dressing panels fully enclose the bench. The lockable doors consist of two hinged panels with a lock handle to secure the content of the bench. The supports of the work surfaces on this bench variant allow separate storage of components and can accommodate two student groups. Intended Location On the floor (stands on casters) 910 x 850 x 660 mm (35.8 x 33.5 x 26 in) 64 kg (141 lb) Bench (with Dressing Panels and Lockable Doors, Unassembled) 6303-E0 The Bench (with Dressing Panels and Lockable Doors, Unassembled) consists of a mobile workstation on which the Work Surfaces, s 6301 and , can be mounted. Four heavy-duty, swivelling, lockable casters allow the bench to be easily moved in the laboratory classroom. The bench has three pairs of side supports over which three Storage/ Work Surfaces, 6309, can be slid to provide shelving for component storage. This bench variant requires assembly and comprises dressing panels with Festo Didactic 31
32 lockable front, rear, and side doors. These dressing panels fully enclose the bench. The lockable doors consist of two hinged panels with a lock handle to secure the content of the bench. The supports of the work surfaces on this bench variant allow separate storage of components and can accommodate two student groups. Intended Location On the floor (stands on casters) 910 x 850 x 660 mm (35.8 x 33.5 x 26 in) 64 kg (141 lb) Storage/Work Surface The Storage/Work Surface is a perforated metal plate on which the equipment is placed. Two work surfaces can be joined using Spacers, x 590 x 590 mm (1 x 23 x 23 in) 5 kg (11 lb) DC Power Supply 6360-A5 The DC Power Supply converts the ac line voltage into a 24 V dc voltage. The power supply is protected against short circuits by an automatic current/ limit circuit. 32 Festo Didactic
33 Power Requirements Voltage Current Service Installation Output Voltage Current V ac 4.4 A Standard single-phase ac outlet 24 V dc 5.0 A 120 x 140 x 225 mm (4.7 x 5.5 x 8.9 in) TBE Push-Button Station The Push-Button Station consists of two momentary push-button switches, one with normally-open contact, and one with normally-closed contact. Push-Buttons Contacts Two, momentary NO, NC, 24 V dc 3 A 70 x 70 x 170 mm (2.8 x 2.8 x 6.7 in) 0.4 kg (0.9 lb) Limit-Switch Assembly The Limit-Switch Assembly consists of two mechanical limit switches actuated by a roller arm. The limit switches are used for detecting the rod position of the cylinders. Each switch has one normally open and one normally closed contact. Festo Didactic 33
34 Switches Contacts Switch Positioning Range Relay Two, roller-lever actuated, momentary SPDT, 24 V dc 3 A Switches must be positioned within 15 cm (6 in) of each other 70 x 150 x 160 mm (2.8 x 5.9 x 6.3 in) 0.9 kg (2.0 lb) The Relay consists in a relay coil controlling three sets of normally open and normally closed contacts. Type Coil Voltage Contacts General purpose, plug-in 24 V dc SPDT; 24 V dc 3 A 100 x 120 x 130 mm (3.9 x 4.7 x 5.1 in) 0.9 kg (2.0 lb) 34 Festo Didactic
35 Time-Delay Relay / Counter The Time-Delay Relay / Counter consists in a relay that can be programmed for either timing or counting function. The relay has two sets of normally-open and normallyclosed contacts. Type Programmable, multifunction, digital, LCD display Timing Range 0.1 s to 9990 h Counting Range Contacts DPDT; 24 V dc 3 A 100 x 120 x 135 mm (3.9 x 4.7 x 5.3 in) 0.9 kg (2.0 lb) Pilot-Lamp Station The Pilot-Lamp Station consists of two amber incandescent pilot lamps whose terminals can be accessed using miniature banana jacks. Lamps Quantity 2 Color Amber Type Incandescent Voltage Rating 24 V dc Festo Didactic 35
36 70 x 70 x 170 mm (2.8 x 2.8 x 6.7 in) 0.4 kg (0.9 lb) Signal Conditioners transmission to a controller. The Signal Conditioners module consists of a voltage converter with adjustable outputs, a voltage converter with fixed-calibration outputs, and a frequency-to-voltage converter with adjustable and fixedcalibration outputs. The Signal Conditioners module is used to convert the signals provided by the Pressure Transducer, 6471, the Position Transducer, 6395, and the Diffuse Reflective Photoelectric Switch, 6372, into signals of normalized range that are suitable for Power Requirements Rating (All Converters) Output Voltages Output Impedance Voltage Converter (with Adjustable Outputs) Input Voltage Input Impedance Zero Adjustment Span Adjustment Voltage Converter (with Fixed-Calibration Outputs) Input Voltage Input Impedance Frequency Converter Input Frequency Fixed-Calibration Output Span Adjustment 24 V dc 0-5 V and 0-10 V 1 kω 0-5 V 1 MΩ V approx V approx V 150 kω 2-33 Hz 1 V/1000 r/min Hz 115 x 135 x 220 mm (4.5 x 5.3 x 8.7 in) 1.5 kg (3.1 lb) 36 Festo Didactic
37 PID Controller The PID Controller consists of various controls and circuits that allow openand closed-loop control. The PID Controller circuits include a setpoint generator, a ramp generator, an error detector, a low-pass filter, proportional (P), integral (I), and derivative (D) amplifiers, a summing amplifier, and a limiter circuit. Each circuit is independently terminated to permit students to wire the PID controller in different configurations. Power Requirement Current TBE Service Installation Standard single-phase ac outlet Rating (all Sections) Input Voltage -10 to +10 V Output Voltage -10 to +10 V Input Impedance 1 MΩ Output Impedance 1 kω Setpoints Two, selectable using either a control voltage (24 V dc) or a toggle switch Ramp Generator Ramp Time Adjustable between 0.5 and 3 s, for both positive and negative control voltages. Error Detector Inputs One inverted, two non-inverted Voltage Gain (for each input) 1 Low-Pass Filter Cutoff Frequency Hz P.I.D. Amplifiers Proportional Gain (Low) Proportional Gain (High) 5-50 approx. Integral Gain s approx. Derivative Gain s approx. Integrator Anti-Reset On/Off selector Summing Point Voltage Gain 1 Inputs Three, non-inverted Limiter Output Voltage Lower Limit 0 to -10 V Upper Limit 0 to +10 V 135 x 270 x 180 mm (5.3 x 10.6 x 7.1 in) 4.0 kg (8.8 lb) Festo Didactic 37
38 Magnetic Proximity Switch The Magnetic Proximity Switch consists of two mechanical reeds and an internal coil controlling a normally open and a normally closed contact. It is used for detecting the rod position of the cylinders. Type Supply Voltage Contact Reed 24 V dc SPDT; 24 V dc 3 A 30 x 40 x 100 mm (1.2 x 1.6 x 3.9 in) 0.2 kg (0.4 lb) Diffuse Reflective Photoelectric Switch The Diffuse Reflective Photoelectric Switch consists of a light source and a receiver combined in the same casing. The model has one normally open and one normally closed contact, and the electrical connections are made using miniature banana jacks. Type Light Source Maximum Sensing Range Supply Voltage Contact Diffuse reflective Visible red, 680 nm, eye safe 10.2 cm (4 in) 24 V dc SPDT; 24 V dc 3 A 38 Festo Didactic
39 90 x 120 x 90 mm (3.5 x 4.7 x 3.5 in) 0.4 kg (0.9 lb) Background Suppression Photoelectric Switch The Background Suppression Photoelectric Switch consists of a light source and a receiver combined in the same casing. The sensor is mounted on a flexible support for easy positioning. The model has one normally open and one normally closed contact, and the electrical connections are made using miniature banana jacks. Light Source Maximum Range Supply Voltage Contacts Type Ratings Infrared LED, 880 nm 10 cm (4 in) 24 V dc SPDT 24 V dc - 3 A 400 x 70 x 170 mm (16 x 3 x 7 in) 500 g (1.1 lb) Polarized Retroreflective Photoelectric Switch The Polarized Retroreflective Photoelectric Switch consists of a light source and a receiver combined in the same casing. The sensor requires a special retroreflective surface. The sensor is mounted on a flexible support for easy positioning. The model has one normally open and one normally closed contact, and the electrical connections are made using miniature banana jacks. Festo Didactic 39
40 Light Source Maximum Range Supply Voltage Contacts Type Ratings Visible red LED, 660 nm 3 m (10 ft) 24 V dc SPDT 24 V dc - 3 A 400 x 70 x 170 mm (16 x 3 x 7 in) 500 g (1.1 lb) Inductive Proximity Switch The Inductive Proximity Switch is sensitive to metals. The sensor is mounted on a flexible support for easy positioning. The model has one normally open and one normally closed contact, and the electrical connections are made using miniature banana jacks. Maximum Range Supply Voltage Contacts Type Ratings 10 mm (0.4 in) 24 V dc SPDT 24 V dc - 3 A 400 x 70 x 170 mm (16 x 3 x 7 in) 500 g (1.1 lb) 40 Festo Didactic
41 Capacitive Proximity Switch The Capacitive Proximity Switch is sensitive to every material. The sensor is mounted on a flexible support for easy positioning. The model has one normally open and one normally closed contact, and the electrical connections are made using miniature banana jacks. Maximum Range Supply Voltage Contacts Type Ratings 25 mm (1 in) 24 V dc SPDT 24 V dc - 3 A 400 x 70 x 170 mm (16 x 3 x 7 in) 500 g (1.1 lb) Diffuse Reflective Photoelectric Switch The Diffuse Reflective Photoelectric Switch consists of a light source and a receiver combined in the same casing. The sensor is mounted on a flexible support for easy positioning. The model has one normally open and one normally closed contact, and the electrical connections are made using miniature banana jacks. Light Source Maximum Range Visible red LED, 700 nm 20 cm (8 in) Festo Didactic 41
42 Supply Voltage Contacts Type Ratings 24 V dc SPDT 24 V dc - 3 A 400 x 70 x 170 mm (16 x 3 x 7 in) 500 g (1.1 lb) Fiber-Optic Photoelectric Switch The Fiber-Optic Photoelectric Switch consists of a fiber-optic photoeletric switch whose light source is a visible red LED. The sensor is mounted on a flexible support for easy positioning. The model has one normally open and one normally closed contact, and the electrical connections are made using miniature banana jacks. Light Source Maximum Range Supply Voltage Contacts Type Ratings Visible red LED, 680 nm 10 cm (4 in) 24 V dc SPDT 24 V dc - 3 A 400 x 70 x 170 mm (16 x 3 x 7 in) 500 g (1.1 lb) 42 Festo Didactic
43 Multimeter 6394-A0 The Multimeter is used for ac/dc voltage, dc current, and resistance measurements. Type Functions Accuracy Display Features Position Transducer Digital, handheld (portable) AC/DC voltage, dc current, resistance, continuity diode test, and battery test ±2.0% or better 3½ digit, liquid-crystal Safety-recessed test lead connections, low-battery indication, audible continuity, overload protection, mounted on a base that clamps to the work surface using quick-lock fixations 170 x 70 x 38 mm (6.7 x 2.75 x 1.5 in) 0.36 kg (0.8 lb) The Position Transducer provides a voltage corresponding to the rod position of a cylinder. It consists of a flexible cable wound on a cylindrical spool. The cable is ended by a pin that attaches to the rod of the cylinders. Type Position Sensing Range Cable extension spool mm (0-4 in) Festo Didactic 43
44 Output Voltage Supply Voltage 0-24 V dc 24 V dc 100 x 120 x 75 mm (3.9 x 4.7 x 3 in) 0.7 kg (1.5 lb) Reflective Block The Reflective Block consists of a block with various types of reflection surfaces: white, black, shiny metallic, matte black metallic, and retroreflective. The dimensions of the block are: 75 x 75 x 75 mm (3 x 3 x 3 in). Surfaces White, black, shiny metallic, matte black metallic, retroreflective 75 x 75 x 75 mm (3 x 3 x 3 in) 300 g (0.7 lb) 44 Festo Didactic
45 Conditioning Unit The Conditioning Unit conditions and regulates the pressure of the air supplied to the pneumatic circuits. It consists of a main shutoff valve, filter, a pressure regulator, pressure gauge, 4-port manifold, four sleeve valves, and a muffler. The Conditioning Unit requires compressed air from a central air supply or a portable unit. Compressed Air Supply Requirements Flow Rate 90 L/min (3.2 SCFM) approx. Pressure 630 kpa (90 psi) approx. Filter Regulator Maximum Air Flow Rate 550 L/min (19 SCFM) Operating Pressure kpa (7-100 psi) Filtration 5 µm Pressure Gauge Diameter 50 mm (2 in) Operating Pressure kpa (0-100 psi) Outlet Ports Four 216 x 273 x 127 mm (8.5 x 10.7 x 5 in) 2.8 kg (6.2 lb) Conditioning Unit (Faulty) 6411-F0 The Conditioning Unit (Faulty) is a modified version of the Conditioning Unit, , used to perform troubleshooting exercises. Festo Didactic 45
46 Recommended Compressed Air Supply Flow Rate 90 L/min (3.2 SCFM) approx. Pressure 630 kpa (90 psi) approx. Filter Regulator Maximum Air Flow Rate 550 L/min (19 SCFM) Operating Pressure kpa (7-100 psi) Filtration 5 μm Pressure Gauge Diameter 50 mm (2 in) Operating Pressure kpa (0-100 psi) Outlet Ports x 273 x 127 mm (8.5 x 10.7 x 5 in) 2.8 kg (6.2 lb) Accumulator The Accumulator consists in a metal tank that is used to store compressed air. Volume Maximum Operating Pressure 1000 cm³ (61 in³) 700 kpa (100 psi) 102 x 305 x 127 mm (4.0 x 12 x 5.0 in) 0.9 kg (2.0 lb) 46 Festo Didactic
47 Accumulator (Faulty) 6412-F0 The Accumulator (Faulty) is a modified version of the Accumulator, , used to perform troubleshooting exercises. Volume Maximum Operating Pressure 1000 cm³ (61 in³) 700 kpa (100 psi) 102 x 305 x 127 mm (4.0 x 12 x 5.0 in) 0.9 kg (2.0 lb) Vacuum Generator The Vacuum Generator consists in a venturi duct that temporarily restricts the area through which the air must flow, thereby decreasing the air pressure below atmospheric pressure. Vacuum Pressure 2130 mm (84 in) of water at 140-kPa (20-psi) inlet pressure 38 x 210 x 127 mm (1.5 x 8.3 x 5.0 in) 0.5 kg (1.1 lb) Festo Didactic 47
48 Vacuum Generator (Faulty) 6413-F0 The Vacuum Generator (Faulty) is a modified version of the Vacuum Generator, , used to perform troubleshooting exercises. Vacuum Pressure 2130 mm (84 in) of water at 140 kpa (20 psi) inlet pressure 38 x 210 x 127 mm (1.5 x 8.3 x 5.0 in) 0.5 kg (1.1 lb) Directional Control Valve (3/2-Way Push-Button Valve) The Directional Control Valve (3/2-Way Push-Button Valve) consists in a three ports, two spool positions, actuation by pressing, spring return directional control valve. Type Maximum Operating Pressure 3-way, 2-position, push-button operated, spring return 1050 kpa (150 psi) 140 x 127 x 89 mm (5.5 x 5.0 x 3.5 in) 0.5 kg (1.1 lb) 48 Festo Didactic
49 Directional Control Valve (3/2-Way Push-Button Valve, Faulty) 6420-F0 The Directional Control Valve (3/2-Way Push-Button Valve, Faulty) is a modified version of the Directional Control Valve (3/2-Way Push-Button Valve), , used to perform troubleshooting exercises. Type Maximum Operating Pressure Flow Control Valve way, 2-position, push-button operated, spring return 1050 kpa (150 psi) 140 x 127 x 89 mm (5.5 x 5.0 x 3.5 in) 0.5 kg (1.1 lb) The Flow Control Valve consists of a needle valve and a reverse free-flow check valve connected in parallel. It restricts the flow rate in one direction, while allowing the air to flow freely in the other direction. Minimum Operating Pressure Maximum Operating Pressure 105 kpa (15 psi) 700 kpa (100 psi) 89 x 127 x 76 mm (3.5 x 5.0 x 3.5 in) 0.3 kg (0.7 lb) Festo Didactic 49
50 Directional Control Valve (5/2-Way Double-Pilot Valve) The Directional Control Valve (5/2-Way Double-Pilot Valve) consists in a five ports, two spool positions, pneumatically actuated in both directions, directional control valve. Type Operating Pressure 5 ports, 4 ways, 2 positions, double air-pilot operated kpa ( psi) 133 x 127 x 76 mm (5.2 x 5.0 x 3.5 in) 0.5 kg (1.1 lb) Directional Control Valve (5/2-Way Double-Pilot Valve, Faulty) 6422-F0 The Directional Control Valve (5/2-Way Double-Pilot Valve, Faulty) is a modified version of the Directional Control Valve (5/2-Way Double-Pilot Valve), , used to perform troubleshooting exercises. 50 Festo Didactic
51 Type Operating Pressure 5 ports, 4 ways, 2 positions, double air-pilot operated kpa ( psi) 133 x 127 x 76 mm (5.2 x 5.0 x 3.5 in) 0.5 kg (1.1 lb) Directional Control Valve (5/3-Way Double-Solenoid Valve) The Directional Control Valve (5/3-Way Double-Solenoid Valve) consists in a five ports, three spool positions, actuated by solenoid and pneumatic piloting in both directions, spring centered, closed center, directional control valve. Type Solenoids 5 ports, 4 ways, 3 positions, double-solenoid operated, spring centered, closed center 24 V dc 115 x 150 x 70 mm (4.5 x 5.9 x 2.8 in) 0.7 kg (1.5 lb) Festo Didactic 51
52 Single Solenoid-Actuated Directional Control Valve The Single Solenoid-Actuated Directional Control Valve consists of a five ports, two spool positions, actuated by solenoid and pneumatic piloting in one direction, spring return, directional control valve. Type Solenoids 5 ports, 4 ways, 2 positions, single-solenoid operated, spring return 24 V dc 115 x 150 x 70 mm (4.5 x 5.9 x 2.8 in) 0.7 kg (1.5 lb) AND Function Valve (Dual-Pressure Valve) The AND Function Valve (Dual- Pressure Valve) consists in a three ports, two spool position, pneumatically operated valve. The valve allows fluid to flow through it when both input ports are pressurized, according to the AND function in Boolean logic. Actuator Type Actuating Pressure Single acting, spring return, air pilot 210 kpa (30 psi) 52 Festo Didactic
53 Maximum Operating Pressure 1050 kpa (150 psi) 68 x 120 x 70 mm (2.7 x 4.7 x 2.8 in) 0.3 kg (0.7 lb) Shuttle Valve (OR Function Valve) The Shuttle Valve (OR Function Valve) consists of a double check valve with two inlet ports and one outlet port. The valve allows fluid to flow through it from the inlet port having the highest pressure, according to the OR function in Boolean logic. Operating Pressure kpa (7-150 psi) 48 x 120 x 90 mm (1.9 x 4.7 x 3.5 in) 0.2 kg (0.4 lb) Quick Exhaust Valve The Quick Exhaust Valve consists of a three-way valve with a diaphragm that allows fluid at the output port side to be exhausted to atmosphere when the pressure at the output port becomes higher than that at the valve inlet port. Operating Pressure kpa (7-150 psi) 85 x 120 x 70 mm (3.3 x 4.7 x 2.8 in) 0.3 kg (0.7 lb) Festo Didactic 53
54 Pressure Regulator The Pressure Regulator consists in a normally open valve that closes when the pressure at its outlet port exceeds the pressure set by the valve knob. Maximum Air Flow Rate Pressure Range 550 L/min (19 SCFM) kpa (7-100 psi) 115 x 120 x 70 mm (4.5 x 4.7 x 2.8 in) 0.6 kg (1.3 lb) Servo Control Valve The Servo Control Valve provides control of the pressure in proportion to a control voltage. It consists of an inlet valve and an exhaust valve, a built-in electronic circuit, and a pressure transducer. The pressure transducer provides the electronic circuit with a feedback signal that corresponds to the actual valve output pressure, the feedback signal is accessible for monitoring. 54 Festo Didactic
55 Type Power Requirement Control Voltage Output Pressure Rated Flow Pressure Transducer Monitoring Output Pressure Control 24 V dc 0.25 A 0-10 or 0-5 V dc kpa (0-100 psi) 34 L/min (1.2 SCFM) at 700 kpa (100 psi) 0-10 V Linearity/Hysteresis ± 0.15% Repeatability ± 0.02% Accuracy ± 0.2% 100 x 120 x 145 mm (3.9 x 4.7 x 5.7 in) 1.3 kg (2.7 lb) Proportional Control Valve (3/2-Way Single-Pilot Valve) The Proportional Control Valve (3/2- Way Single-Pilot Valve) consists in a three port, spring return valve whose operation is pneumatically controlled in one direction. This provides control of the flow rate in proportion to a pilot pressure. This valve is intended to be used in conjunction with the Servo Control Valve, Type Rated Flow 3 ways, 2 positions, single air-pilot operated, spring return 140 L/min (5 SCFM) at 700 kpa (100 psi) 60 x 70 x 170 mm (2.4 x 2.8 x 6.7 in) 0.5 kg (1.1 lb) Festo Didactic 55
56 Single-Acting Cylinder The Single-Acting Cylinder provides a linear pushing motion over a 10.2 cm (4 in) stroke. Its rod is extended under compressed air and retracted by a spring. The cylinder piston is equipped with a permanent ring magnet intended to actuate the Magnetic Proximity Switch, Piston Stroke Bore Size Maximum Operating Pressure Spring return, with permanent ring magnet 100 mm (4 in) 27 mm (1.1 in) 1725 kpa (250 psi) 83 x 267 x 127 mm (3.3 x 10.5 x 5.0 in) 0.9 kg (2.0 lb) Double-Acting Cylinder The Double-Acting Cylinder provides a linear push-pull motion over a 10.2 cm (4 in) stroke. Its rod is both extended and retracted under compressed air. The cylinder piston is equipped with a permanent ring magnet intended to actuate the Magnetic Proximity Switch, Piston Stroke Bore Size With permanent ring magnet 100 mm (4 in) 27 mm (1.1 in) 56 Festo Didactic
57 Maximum Operating Pressure 1725 kpa (250 psi) 83 x 267 x 127 mm (3.3 x 10.5 x 5.0 in) 0.9 kg (2.0 lb) Bidirectional Motor The Bidirectional Motor is a vane-type pneumatic motor that provides rotary motion in either direction. A white sticker affixed onto the motor shaft allows counting of the motor revolutions using a photoelectric switch. Type Ratings Maximum Power Maximum Operating Pressure Maximum Speed Vanes 250 W (0.33 hp) 700 kpa (100 psi) r/min 102 x 127 x 76 mm (4.0 x 5.0 x 3.0 in) 1.0 kg (2.2 lb) Air Bearing The Air Bearing consists of a disk with a side inlet duct leading to an underneath cavity. When pressurized air enters the side inlet duct, a thin film of escaping air is formed between the Air Bearing and the work surface, resulting in a friction-free movement in any direction. Diameter 63 mm (2.5 in) 38 x 89 x 64 mm (1.5 x 3.5 x 2.5 in) 0.2 kg (0.4 lb) Festo Didactic 57
58 Pressure Gauge The Pressure Gauge (0-700 kpa) provides a direct visual reading of the pressure on a dual scale graduated in units of kilopascals (kpa) and pounds per square inch (psi). It consists of a Bourdon tube attached through a gear linkage to a needle pointer. Diameter Operating Pressure 38 mm (1.5 in) kpa (0-100 psi) 83 x 127 x 76 mm (3.3 x 5.0 x 3.0 in) 0.3 kg (0.7 lb) Flowmeter The Flowmeter provides a direct visual reading of the air flow rate. It consists of a lightweight ball that moves vertically along a tapered tube with the flow of air, thereby indicating the flow rate. Flow Range Maximum Operating Pressure Accuracy L/min ( SCFM) 700 kpa (100 psi) ± 4% of full scale 159 x 127 x 76 mm (6.3 x 5.0 x 3.0 in) 58 Festo Didactic
59 0.6 kg (1.3 lb) Pressure Switch The Pressure Switch consists in a diaphragm electrical switch with adjustable actuation pressure and pressure differential. The model has one normally-open and one normallyclosed contact, and the electrical connections are made using miniature banana jacks. Adjustable Pressure Range Differential Range Contact kpa ( psi) kpa (10-30 psi) SPDT; 24 V dc 3 A 115 x 120 x 140 mm (4.5 x 4.7 x 5.5 in) 0.8 kg (1.8 lb) Pressure Transducer The Pressure Transducer provides a voltage proportional to the pressure applied to the input port. Type Pressure Range Solid state kpa (0-145 psi) Festo Didactic 59
60 Output Voltage Supply Voltage 0-5 V 24 V dc 100 x 120 x 75 mm (3.9 x 4.7 x 3 in) 0.7 kg (1.5 lb) Loading Device The Loading Device consists in a spring enclosed in a clear plastic tube to which a graduated (N and lbf) ruler can be clipped. The Loading Device is intended to be used with Cylinders, s 6440 and 6441, to measure the cylinder output force at different pressures. Spring Compression Rate Force Measurement Ruler Maximum Compression Force Loading Device (Faulty) 6480-F0 98 N/cm (56 lbf/in) Designed to mount on the load device, graduated in N and lbf 500 N (100 lbf) 51 x 178 x 51 mm (2.0 x 7.0 x 2.0 in) 0.3 kg (0.7 lb) The Loading Device (Faulty) is a modified version of the Loading Device, , used to perform troubleshooting exercises. Spring Compression Rate Force Measurement Ruler Maximum Compression Force 98 N/cm (56 lbf/in) Designed to mount on the load device, graduated in N and lbf 500 N (100 lbf) 51 x 178 x 51 mm (2.0 x 7.0 x 2.0 in) 0.3 kg (0.7 lb) 60 Festo Didactic
61 Tees The Tees assembly consists of six push-in tube fittings, interconnected into two groups of three, to which tubes can be connected. Number of Tee Assemblies Maximum Operating Pressure Two 1050 kpa (150 psi) 76 x 127 x 89 mm (3.0 x 5.0 x 3.5 in) 0.5 kg (1.1 lb) Tees (Faulty) 6490-F0 The Tees (Faulty) is a modified version of the Tees, , used to perform troubleshooting exercises. Number of Tee Assemblies Maximum Operating Pressure Two 1050 kpa (150 psi) 76 x 127 x 89 mm (3.0 x 5.0 x 3.5 in) 0.5 kg (1.1 lb) Festo Didactic 61
62 Tubing and Accessories from the component fittings. The Tubing and Accessories set consists of polyethylene tubing, digital tachometer, stopwatch, tube cutter, tube releasing tool, and a pair of gloves. The tubing is cut into lengths required by pneumatic circuits using a tube cutter, then connected to the components by manually pushing the tubes into the component fittings. A tool is supplied to release the tubes The digital tachometer indicates motor rotation speed either in a clockwise or counterclockwise direction. The measured speed is automatically indicated on a high-visibility, five-digit display, and is updated every second to enable measurements of acceleration and deceleration. Tubing Type Maximum Operating Pressure Tube Cutter Polyethylene, 6 mm (0.25 in) outside diameter, 15 m (50 ft) long 700 kpa (100 psi) For tubing with outside diameter between 6 and 12 mm (0.25 and 0.5 in) 0.4 kg (0.9 lb) Connection Leads (4 Lengths) 6491-A0 The Connection Leads (4 Lengths) consists in extra-flexible electrical leads terminated with stacking 2 mm banana plugs. The leads are supplied in four different lengths, and are color coded according to length. Electrical Leads Quantity, Length Connectors Current Rating Eight, 15 cm (6 in) Eight, 30 cm (12 in) Ten, 45 cm (18 in) Ten, 60 cm (24 in) 2 mm banana plugs 10 A 0.2 kg (0.4 lb) 62 Festo Didactic
63 Long Line The Long Line consists in an 11.5 m (38 ft) length of polyethylene coiled tubing having a small diameter. The Long Line is used to simulate the friction caused by a long tubing line. Tubing Type Maximum Operating Pressure Polyethylene, 3 mm (0.13 in) outside diameter, 11.5 m (38 ft) long 700 kpa (100 psi) 235 x 127 x 127 mm (9.3 x 5.0 x 5.0 in) 1.0 kg (2.2 lb) Festo Didactic 63
64 Long Line (Faulty) 6492-F0 The Long Line (Faulty) is a modified version of the Long Line, , used to perform troubleshooting exercises. Tubing Type Maximum Operating Pressure Muffler Polyethylene, 3 mm (0.13 in) outside diameter, 11.5 m (38 ft) long 700 kpa (100 psi) 235 x 127 x 127 mm (9.3 x 5.0 x 5.0 in) 1.0 kg (2.2 lb) The Muffler is mounted on a base plate. It is used to reduce exhaust noise. 64 Festo Didactic
65 Optional Equipment Description Extended Warranty for the Pneumatics Training System (Optional) 6081-EW The Festo Didactic Extended Warranty program offers you the flexibility to add to the standard two-year manufacturer s warranty. The Extended Warranty provides coverage for up to three additional years, for a total of five years of protection on your investment for your pneumatics training equipment. Extended Warranty terms are the same as the terms for the current two-year manufacturer warranty. Work Surface (A-Frame) (Optional) The Work Surface (A-Frame) consists of two sloping work surfaces joined at the top and braced at their base by a universal drip tray. It allows two groups of students to connect separate circuits. It can be placed atop a regular work table or on an optional bench, such as the 6303, which provides mobility and separate storage for the components. 540 x 900 x 820 mm (21.3 x 35.5 x 32.3 in) 23.6 kg (52 lb) Expanding Work Surface (Large) (Optional) The Expanding Work Surface (Large) consists in a perforated plate that can be mounted on the main Work Surface, 6301, to increase the work area. The Expanding Work Surface (Large) is two-thirds the main Work Surface in area. 30 x 590 x 590 mm (1 x 23 x 23 in) 5.9 kg (12.8 lb) Festo Didactic 65
66 Expanding Work Surface (Small) (Optional) The Expanding Work Surface (Small) consists in a perforated plate that can be mounted on the main Work Surface, 6301, to increase the work area. The Expanding Work Surface (Small) is one-third the main Work Surface in area. 30 x 290 x 590 mm (1 x 11.5 x 23 in) 3.2 kg (7.5 lb) Bench (Unassembled) (Optional) The Bench (Unassembled) consists of a mobile workstation on which the Work Surfaces, s 6301 and , can be mounted. Four heavyduty, swivelling, lockable casters allow the bench to be easily moved in the laboratory classroom. The bench has three pairs of side supports over which three Storage/Work Surfaces, 6309, can be slid to provide shelving for component storage. This bench variant requires assembly and does not comprise any dressing panel. Intended Location On the floor (stands on casters) 910 x 850 x 660 mm (35.8 x 33.5 x 26 in) 66 Festo Didactic
67 37.3 kg (82.5 lb) Dressing Panels (with Lockable Front Door) (Optional) 6303-A0 The Dressing Panels (with Lockable Front Door) are used to fully enclose the benches, s and 6303-B. The lockable front doors consist of two hinged panels with a lock handle to secure the content of the bench. A pair of lockable side doors are provided to secure the components stored on the side shelves. Intended Location Installed on the front, rear, and sides of a Bench, or 6303-B 25.5 kg (55.9 lb) Bench (Assembled) (Optional) 6303-B0 The Bench (Assembled) consists of a mobile workstation on which the Work Surfaces, s 6301 and , can be mounted. Four heavy-duty, swivelling, lockable casters allow the bench to be easily moved in the laboratory classroom. The bench has three pairs of side supports over which three Storage/Work Surfaces, 6309, can be slid to provide shelving for component storage. This bench variant is provided already assembled, but does not comprise any dressing panels. Intended Location On the floor (stands on casters) 910 x 850 x 660 mm (35.8 x 33.5 x 26 in) 37.3 kg (82.5 lb) Festo Didactic 67
68 Bench (with Dressing Panels and Lockable Front Door, Assembled) (Optional) 6303-C0 The Bench (with Dressing Panels and Lockable Front Door, Assembled) consists of a mobile workstation on which the Work Surfaces, s 6301 and , can be mounted. Four heavy-duty, swivelling, lockable casters allow the bench to be easily moved in the laboratory classroom. The bench has three pairs of side supports over which three Storage/ Work Surfaces, 6309, can be slid to provide shelving for component storage. This bench variant is provided already assembled and comprises dressing panels with a lockable front door. These dressing panels fully enclose the bench. The lockable front door consists of two hinged panels with a lock handle to secure the content of the bench. Intended Location On the floor (stands on casters) 910 x 850 x 660 mm (35.8 x 33.5 x 26 in) 64 kg (141 lb) Bench (with Dressing Panels and Lockable Doors, Assembled) (Optional) 6303-D0 The Bench (with Dressing Panels and Lockable Doors, Assembled) consists of a mobile workstation on which the Work Surfaces, s 6301 and , can be mounted. Four heavyduty, swivelling, lockable casters allow the bench to be easily moved in the laboratory classroom. The bench has three pairs of side supports over which three Storage/Work Surfaces, 6309, can be slid to provide shelving for component storage. This bench variant is provided already assembled and comprises dressing panels with lockable front, rear, and side doors. These dressing panels fully enclose the bench. The lockable doors consist of two hinged panels with a lock handle to secure the content of the bench. 68 Festo Didactic
69 The supports of the work surfaces on this bench variant allow separate storage of components and can accommodate two student groups. Intended Location On the floor (stands on casters) 910 x 850 x 660 mm (35.8 x 33.5 x 26 in) 64 kg (141 lb) Bench (with Dressing Panels and Lockable Doors, Unassembled) (Optional) 6303-E0 The Bench (with Dressing Panels and Lockable Doors, Unassembled) consists of a mobile workstation on which the Work Surfaces, s 6301 and , can be mounted. Four heavy-duty, swivelling, lockable casters allow the bench to be easily moved in the laboratory classroom. The bench has three pairs of side supports over which three Storage/ Work Surfaces, 6309, can be slid to provide shelving for component storage. This bench variant requires assembly and comprises dressing panels with lockable front, rear, and side doors. These dressing panels fully enclose the bench. The lockable doors consist of two hinged panels with a lock handle to secure the content of the bench. The supports of the work surfaces on this bench variant allow separate storage of components and can accommodate two student groups. Intended Location On the floor (stands on casters) 910 x 850 x 660 mm (35.8 x 33.5 x 26 in) 64 kg (141 lb) Storage/Work Surface (Optional) The Storage/Work Surface is a perforated metal plate on which the equipment is placed. Two work surfaces can be joined using Spacers, Festo Didactic 69
70 30 x 590 x 590 mm (1 x 23 x 23 in) 5 kg (11 lb) Air Compressor (Optional) 6410-B5 The Air Compressor is a quiet device well suited for classroom and school laboratories. It is provided with a tank, pressure regulator, pressure gauge, and a hose. The Air Compressor is available in different variants depending on ac power network voltages and frequencies. Because of this, the actual module may vary from the one shown in the picture. Power Requirements Current Power Service Installation Tank Capacity Flow Rate Flow Rate (Free Flow) Flow Rate at 621 kpa (90 psi) Maximum Pressure Noise Level 10.2 A 2.25 kw (3 hp) Standard single-phase ac outlet 70 L (15.4 gal) 410 L/min (14.4 CFM) 170 L/min (6 CFM) 8 bar (116 psi) 70 db/a 920 x 500 x 750 mm (36.2 x 19.7 x 29.5 in) kg (239.2 lb) 70 Festo Didactic
71 Directional Control Valve (Roller-Lever Operated) (Optional) This valve consists of two three-way, two-position, roller lever actuated, directional control valves. The valves are actuated by the rod tip of the Cylinders, s 6440 and The valves are normally non-passing at rest position. Type Maximum Operating Pressure 3 ways, 2 positions, roller-lever operated 1050 kpa (150 psi) 70 x 50 x 160 mm (2.8 x 5.9 x 6.3 in) 0.9 kg (2.0 lb) Advanced Pneumatics - eseries (Optional) This site-license course bundle is intended to be used in conjunction with either the Pneumatics Training System, Series 6081, or the Pneumatics Simulation Software (LVSIM -PNE). Advanced Pneumatics contains the following courses: Electrical Control of Pneumatic Systems, Pneumatic Applications PLC, Servo Control of Pneumatic Systems, and Sensors, each of which has a pretest and posttest. Each course includes the topics covered in the book-based content and their related hands-on exercises. Exercise procedures are presented in enhanced PDF format. Completed exercises may be printed, saved to a specific location, and submitted ( ed) to the instructor. Exercise presentation of technical content is accompanied by voiceover narration to minimize the amount of on-screen reading. The following learning platforms are available: : Advanced Pneumatics - eseries Festo Didactic 71
72 6486-2: Advanced Pneumatics - SCORM : Advanced Pneumatics - Stand-Alone Computer Requirements A currently available personal computer running under one of the following operating systems: Windows 7 or Windows 8. Pneumatics Fundamentals - eseries (Optional) 6486-E0 This site-license course bundle is intended to be used in conjunction with either the Pneumatics Training System, Series 6081, or the Pneumatics Simulation Software (LVSIM -PNE), Pneumatics Fundamentals contains four courses: Introduction to Pneumatics, Basic Physical Concepts, Basic Controls of Cylinders, and Basic Controls of Pneumatic Motors, each of which has a pretest and posttest. The courses include the topics covered in the book-based content and their related hands-on exercises. Exercise procedures are presented in enhanced PDF format. Completed exercises may be printed, saved to a specific location, and submitted ( ed) to the instructor. Exercise presentation of technical content is accompanied by voiceover narration to minimize the amount of on-screen reading. The following learning platforms are available: 6486-E: Pneumatics Fundamentals - eseries 6486-F: Pneumatics Fundamentals - SCORM 6486-G: Pneumatics Fundamentals - Stand-Alone Upgrades: schools that are running the Tech-Lab version of Pneumatics Fundamentals may purchase an upgrade to the eseries course U: Pneumatics Fundamentals - eseries (course upgrade) Advanced variants of the above learning platforms are also available: : Advanced Pneumatics - eseries : Advanced Pneumatics - SCORM : Advanced Pneumatics - Stand-Alone Computer Requirements A currently available personal computer running under one of the following operating systems: Windows 7 or Windows Festo Didactic
73 Personal Computer (Optional) The Personal Computer consists of a desktop computer running under Windows 10. A monitor, keyboard, and mouse are included. Power Requirements Current Service Installation 1.05 A Standard single-phase ac outlet Instructional DVD - Introduction to Fluid Power (Optional) This 19-minutes video provides a balanced and concise overview of fluid power. It offers definitions, principles, and current uses relative to hydraulic and pneumatic systems. Instructional DVD - Fluid Power Technology at Work (Optional) This 24-minutes video provides a broad overview of hydraulics and pneumatics applications. It covers fluid power in transportation, aviation, machining, manufacturing, mining, energy, and chemical processing industries. Instructional DVD - Pumps, Lines, Filters (Optional) This 29-minutes video demonstrates the operation of the various types of pumps found in the industry through computer animation and live-action video. Filters, hoses, and lines are also explained. Instructional DVD - Control Mechanisms (Optional) This video summarizes the many ways to control fluid power systems. The construction and operation of pilot valves, solenoid valves, sensors, PLCs, and other devices are clearly explained. (27 minutes) Instructional DVD - Actuators (Optional) This 23-minutes video explains the construction and operation of the many types of actuators used in the industry. Cylinders, motors, rotators, grippers, pushers, lifters, rubbers, and bellows are all detailed. Festo Didactic 73
6080 Hydraulics Training System
6080 Hydraulics Training System LabVolt Series Datasheet Festo Didactic en 240 V - 50 Hz 03/2018 Table of Contents General Description 2 Innovative Design 3 Virtual Laboratory Equipment 3 Courseware 3
More informationA Fluid Power PNEUMATICS TRAINING SYSTEMS SERIES 6081
A Fluid Power PNEUMATICS TRAINING SYSTEMS GENERAL DESCRIPTION The Lab-Volt Pneumatics Training System, Model 6081, is a modular program in pneumatics and its applications. The system is divided into five
More informationHANDS-ON INDUSTRIAL TRAINING FLUID SENSORS SIMULATION SOFTWARE E-LEARNING CERTIFICATION PREPARATION
HANDS-ON INDUSTRIAL TRAINING FLUID SENSORS SIMULATION SOFTWARE E-LEARNING CERTIFICATION PREPARATION Innovative Design Offers Exceptional Options Lab-Volt offers the most comprehensive and flexible course
More informationIndustrial Controls Training Systems
Industrial Controls Training Systems LabVolt Series Datasheet Festo Didactic en 220 V - 50 Hz 04/2018 Table of Contents General Description 2 Integration into 8001 and 8006 Electromechanical Training Systems
More informationHydraulics and Pneumatics Simulation Software (LVSIM -HYD & PNEU) - 1 User
6387-00 Hydraulics and Pneumatics Simulation Software (LVSIM -HYD & PNEU) - User LabVolt Series Datasheet Festo Didactic en 02/208 Table of Contents General Description 2 Topic Coverage 2 Features & Benefits
More informationHydraulics Simulation Software (LVSIM -HYD) - 10 Users Network (6385-Q0)
Hydraulics Simulation Software (LVSIM -HYD) - 10 Users Network 588018 (6385-Q0) LabVolt Datasheet Festo Didactic en 12/2018 Table of Contents General Description 2 Features 2 Hydraulics Equipment 3 Computer
More informationCourseware Sample F0
Fluid Power Pneumatics Courseware Sample 31290-F0 ü FLUID POWER PNEUMATICS COURSEWARE SAMPLE by the Staff of Lab-Volt (Quebec) Ltd Copyright 1999 Lab-Volt Ltd All rights reserved. No part of this publication
More informationVariable-Frequency Drive Training System
3356-00 Variable-Frequency Drive Training System LabVolt Series Datasheet Festo Didactic en 120 V - 60 Hz 05/2018 Table of Contents General Description 2 Components 3 Carrying Case 4 Courseware 4 Topic
More informationPneumatics Fundamentals
Fluid Power Pneumatics Fundamentals Courseware Sample 31290-F0 Order no.: 31290-00 First Edition Revision level: 01/2015 By the staff of Festo Didactic Festo Didactic Ltée/Ltd, Quebec, Canada 1997 Internet:
More informationHydrogen Fuel Cell Training System
8010-80 Hydrogen Fuel Cell Training System LabVolt Series Datasheet Festo Didactic en 03/2018 Table of Contents General Description 2 Exercises 3 Features & Benefits 3 List of Equipment 4 List of Manuals
More information8036-A0 Motor Drives Training System (Stand-Alone)
8036-A0 Motor Drives Training System (Stand-Alone) LabVolt Series Datasheet Festo Didactic en 120 V - 60 Hz 04/2018 Table of Contents General Description 2 List of Equipment 2 List of Manuals 2 Table of
More informationLearning System for Automation and Communications. Electropneumatics. Workbook Basic Level S1 K1 K1 Y1
Learning System for Automation and Communications Electropneumatics Workbook Basic Level 1 2 3 S1 K1 K1 S2 K1 094005 Order no. 094005 Description: TEACHW.E-PNEUM. Designation: D.S201-C-GB Edition: 08/1993
More informationHydrogen Fuel Cell Training System ( )
Hydrogen Fuel Cell Training System 579307 (8010-80) LabVolt Series Datasheet Festo Didactic en 10/2018 Table of Contents General Description 2 Exercises 3 Features & Benefits 3 List of Equipment 4 List
More informationSAP E & C ADVANCED CUSTOMIZED ELECTRO PNEUMATIC TRAINER (FOR ITI) (PRODUCT CODE: SAP 20B-I)
The Advanced Customized Electro Pneumatic Trainer (SAP 20B-I) is capable of being used to demonstrate the design, construction and application of electro-pneumatic components and circuits. Objectives:-
More informationSolar/Wind Energy Training Systems LabVolt Series
Solar/Wind Energy Training Systems LabVolt Series Datasheet Festo Didactic en 120 V - 60 Hz 08/2018 Table of Contents General Description 2 Courseware 2 elearning Formats 3 Topic Coverage 3 Features &
More informationElectro-Mechanical Training System with DC Motor
Electro-Mechanical Training System with DC Motor LabVolt Series Datasheet Festo Didactic en 220 V - 50 Hz 07/2018 Table of Contents General Description 2 PLC Compatibility 2 Features & Benefits 2 List
More informationPumps Training Systems
Pumps Training Systems 46106-00 LabVolt Series Datasheet Festo Didactic en 120 V - 60 Hz 02/2019 Table of Contents General Description 2 Innovative Design 3 Courseware 3 Typical Pump Applications 4 Included
More informationPNEUTRAINER-400 Pneumatics - Electropneumatics
PNEUTRAINER-400 Pneumatics - Electropneumatics End-to-end solution for training in pneumatics and electro-pneumatics SMC industrial systems components on panel mounting plate Implements and controls pneumatic
More information46120 Solar/Wind Energy Training Systems
46120 Solar/Wind Energy Training Systems LabVolt Series Datasheet Festo Didactic en 220 V - 60 Hz 04/2018 Table of Contents General Description 2 Courseware 2 elearning Formats 3 Topic Coverage 3 Features
More informationDidactic and technological innovation at the service of training in pneumatics and electro-pneumatics have resulted in the creation of the
Didactic and technological innovation at the service of training in pneumatics and electro-pneumatics have resulted in the creation of the PNEUTRAINER-200 system. A fully modular system designed for the
More informationElectrohydraulics Advanced Level Workbook TP 602
Electrohydraulics Advanced Level Workbook TP 602 Festo Didactic 094471 en Authorised applications and liability The Learning System for Automation and Communication has been developed and prepared exclusively
More informationElectro Pneumatic Workbench Scientech 2470
Scientech 2470 Electro Pneumatic Workbench is designed to demonstrate the design, construction and application of Pneumatic components and circuits. It integrates PLC technology to build Hybrid Industrial
More informationPNEUTRAINER-200 Pneumatics - Electro-pneumatics
PNEUTRAINER-200 Pneumatics - Electro-pneumatics End-to-end solution for training in pneumatics and electro-pneumatics. www.smctraining.com training@smctraining.com 46 Develop the SKILLS... Analysis Troubleshooting
More informationADVANCED CUSTOMIZED ELECTRO PNEUMATIC TRAINER (PRODUCT CODE: SAP 20B)
The Advanced Customized Electro Pneumatic Trainer (SAP 20B) is capable of being used to demonstrate the design, construction and application of electro-pneumatic components and circuits. Objectives:- The
More informationPumps Training Systems
Pumps Training Systems LabVolt Series Datasheet Festo Didactic en 120 V - 60 Hz 07/2018 Table of Contents General Description 2 Innovative Design 3 Courseware 3 Typical Pump Applications 4 Included in
More informationSolar/Wind Energy Training Systems
Solar/Wind Energy Training Systems LabVolt Series Datasheet Festo Didactic en 120 V - 60 Hz 07/2018 Table of Contents General Description 2 Courseware 2 elearning Formats 3 Topic Coverage 3 Features &
More informationDISCUSSION OF FUNDAMENTALS. A hydraulic system can be controlled either manually or automatically:
Unit 1 Introduction to Electrical Control of Hydraulic Systems UNIT OBJECTIVE When you have completed this unit, you will be able to identify the components used for electrical control of the Hydraulics
More informationTraining Systems for Pneumatics R /
Training Systems for Pneumatics R999000218 /11.2015 2 Training Systems for Pneumatics Training Systems for Pneumatics Drive & Control Academy 4 Training systems pneumatics 8 Device sets 10 Study topics
More informationSuggested list for the Hydraulic and Pneumatic lab Instruments Mechatronics Engineering Department School of Applied Technical Science
Suggested list for the Hydraulic and Pneumatic lab Instruments Mechatronics Engineering Department School of Applied Technical Science Pneumatic and Electro-pneumatic components: No. EQUIPMENTS operating
More informationCURRICULUM BOSCH-REXROTH (CENTRE OF EXCELLENCE) GANPAT UNIVERSITY
ANNEXURE - A CURRICULUM BOSCH-REXROTH (CENTRE OF EXCELLENCE) Host Institute: GANPAT UNIVERSITY Contents of Basic Industrial Pneumatics -----------------------------------------------------------------------------------------------------------------
More informationMechanical Training Systems
Mechanical Training Systems LabVolt Series Datasheet Festo Didactic en 120 V - 60 Hz 06/2018 Table of Contents General Description 2 Courseware 2 elearning Formats 3 Model Utilization Chart 3 Topic Coverage
More informationIndustrial Wiring Training Systems
Industrial Wiring Training Systems LabVolt Series Datasheet Festo Didactic en 220 V - 60 Hz 07/2018 Table of Contents General Description 2 The Mobile Workstation 2 Tools Required 3 Courseware 3 Consumables
More informationBASIC PNEUMATIC & ELECTROPNEUMATIC TRAINING SYSTEM
BASIC PNEUMATIC & ELECTROPNEUMATIC TRAINING SYSTEM UCTECH has designed a comprehensive range of specialised training packages and products for pneumatic and electro-pneumatic training using well-known
More informationSubject: Pneumatic Training Kit with portable Air Compressor
MSME TOOL ROOM: HYDERABAD (CENTRAL INSTITUTE OF TOOL DESIGN) Balanagar, Hyderabad 500 037 TEL.NO.23772747, 23776168 FAX No.0-4023772658 E-mail:citdpurchase@citdindia.org Visit us: www.citdindia.org. TENDER
More informationLead-Acid Batteries Training System
8010-45 Lead-Acid Batteries Training System LabVolt Series Datasheet Festo Didactic en 220 V - 50 Hz 03/2018 Table of Contents General Description 2 Courseware 3 Modular Design Approach 4 Features & Benefits
More informationElectro Pneumatic WorkStation Scientech 2470
Electro Pneumatic WorkStation is designed to demonstrate the design, construction and application of Pneumatic components and circuits. It integrates PLC technology to build Hybrid Industrial Automation
More informationThe Discussion of this exercise covers the following points:
Exercise 2 Float Switch EXERCISE OBJECTIVE Learn the working principle of float switches and how to use the float switch, Model 46935. DISCUSSION OUTLINE The Discussion of this exercise covers the following
More informationMotor Drives Training System (Stand-Alone, 120 V Version) (8036-C0)
Motor Drives Training System (Stand-Alone, 120 V Version) 581526 (8036-C0) LabVolt Series Datasheet Festo Didactic en 120 V - 60 Hz 11/2018 Table of Contents General Description 2 List of Equipment 2 List
More informationPneumatics Electropneumatics
Training systems for basic and future oriented education in natural science and engineering Pneumatics Electropneumatics Experimental Panel and Module System 07 / 2003 Contents Experimental panel system..........................
More informationSmall-Scale Wind Power Electricity Generation Training System
Small-Scale Wind Power Electricity Generation Training System LabVolt Series Datasheet Festo Didactic en 220 V - 60 Hz 04/2018 Table of Contents General Description 2 Courseware 3 Modular Design Approach
More informationTraining systems for hydraulics. Edition:
Training systems for hydraulics Edition: 05.2017 2 Training systems for hydraulics Training systems for hydraulics 3 The 4 Learning topics 7 Term definition 11 Overview of the learning topics 12 Learning
More informationMechanical Training Systems ( )
Mechanical Training Systems 593363 (46101-00) LabVolt Series Datasheet Festo Didactic en 120 V - 60 Hz 11/2018 Table of Contents General Description 2 Courseware 2 elearning Formats 3 Model Utilization
More informationPNEUMATE-200 Your mate in Pneumatics!
PNEUMATE-200 Your mate in Pneumatics! The compact trainer to help users discover more about pneumatic and electro-pneumatic technologies. www.smctraining.com training@smctraining.com 40 Develop the SKILLS...
More informationDrive & Control Academy Fluid Power Training Systems. Training topics for industrial and mobile hydraulics
Drive & Control Academy Fluid Power Training Systems Training topics for industrial and mobile hydraulics 2 03 Drive & Control Academy 05 Training Systems 05 Fluid Power Training Systems DS2NA, DS4NA 06
More informationTable of Contents. Table of Contents UniTrain UniTrain courses UniTrain mechatronic courses IMS 23/24 with 3/4 subsystems
Table of Contents Table of Contents UniTrain UniTrain courses UniTrain mechatronic courses IMS 23/24 with 3/4 subsystems 1 2 2 3 4 Lucas Nülle GmbH Page 1/16 www.lucas-nuelle.com UniTrain UniTrain is a
More informationFesto Modular Production System (MPS)
ELEC E8114 Manufacturing Automation Systems Modelling Festo Modular Production System (MPS) Figure 1 Distribution station (left) and testing station (right) 1 Introduction The purpose of this document
More informationELECTRICAL TECHNOLOGY 3 March 2008
I. Course Description ELECTRICAL TECHNOLOGY 3 March 2008 The purpose for this course is to instruct potential electricians in the skills necessary for entry into the job market. During this course, the
More informationJobMaster Training Program
JobMaster Training Program Mechatronics and Industrial Maintenance JobMaster provides a superior blended learning solution for mechatronics and industrial maintenance training by combining industrial-grade
More informationHYDROTRAINER-200 Hydraulics - Electro-hydraulics
HYDROTRAINER-200 Hydraulics - Electro-hydraulics Hydraulics and electro-hydraulics within your reach www.smctraining.com training@smctraining.com 80 Develop the SKILLS... Analysis Troubleshooting Implements
More informationElectropneumatics Basic Level Set of Overhead Transparencies TP 201
Electropneumatics Basic Level Set of Overhead Transparencies TP 0 Festo Didactic 0950 en Order No.: 0950 Description: EL-PN.FOLIEN-GS Designation: D:OT-TP0-GB Edition: 0/000 Author: Frank Ebel Graphics:
More informationIndustrial Controls Training System. Motor Drives. Courseware Sample F0
Industrial Controls Training System Motor Drives Courseware Sample 87669-F0 A First Edition Published October 2013 2011 by Lab-Volt Ltd. Printed in Canada All rights reserved ISBN 978-2-89640-469-8 (Printed
More informationHYDROGEN FUEL CELL TRAINING SYSTEM
Alternative & Renewable Energy HYDROGEN FUEL CELL TRAINING SYSTEM Hydrogen Fuel Cell Training System, Model 8010-80 GENERAL DESCRIPTION Lab-Volt now offers a Hydrogen Fuel Cell Training System, designed
More informationDrive & Control Academy DS4NA Fluid Power Training System
Drive & Control Academy DS4NA Fluid Power Training System New: simplified model coding and ordering 2 03 Drive & Control Academy 05 DS4NA Fluid Power Training System 05 System description 06 Technology
More informationElectro - Hydraulics. & Pneumatics. Electro Hydraulic Press. Comparison. Electro Hydraulics. By: Alireza Safikhani
Electro - 9 Hydraulics & Pneumatics 2 Electro Hydraulic Press The hydraulic press is controlled via the electrical control panel. Electrical signals are used to activate the valves in the hydraulic installation.
More informationMechatronics. Training Systems. Pneumatics/Electro-pneumatics, PLC, Hydraulics/Electro-hydraulics, Mechanical Transmission
Mechatronics Training Systems Pneumatics/Electro-pneumatics, PLC, Hydraulics/Electro-hydraulics, Mechanical Transmission Tutor Kits Pneumatics Trainers Hydraulics Trainers Courseware/Teachware Mechanical
More information2 kw Electromechanical Training Systems
2 kw Electromechanical Training Systems LabVolt Series Datasheet Festo Didactic en 220 V - 50 Hz 07/2018 Table of Contents General Description 2 Load Modules 3 Metering Modules 3 Courseware 3 Features
More informationHashemite University Mechatronics Engineering Department Process Control Laboratory
Hashemite University Mechatronics Engineering Department Process Control Laboratory 110405533 The Hashemite University Faculty of Engineering Department of Mechatronics Engineering Process Control Lab.
More informationTable of Contents. 95 IMS 25 flexible manufacturing line with 5 stations. 104 IMS 26 flexible manufacturing line with 6 stations
Table of Contents Table of Contents Automation Technology IMS Industrial mechatronics system Mechatronics Sub-Systems with UniTrain-I IMS 1.2: DC transport system IMS 1.3: AC transport system IMS 3 Sorting
More informationElectrohydraulics Basic Level Textbook TP 601
Electrohydraulics Basic Level Textbook TP 601 Festo Didactic 093611 en Order No.: 093611 Edition: 03/2006 Authors: C. Löffler, D. Merkle, G. Prede, K. Rupp, D. Scholz Graphics: Doris Schwarzenberger Layout:
More informationAutomatic Control System PS Pneumatic Training System. Features
Pneumatic Training System It is well known that Factory utomation is an indispensable measure to reduce labor cost, improve production efficiency and achieve higher product quality, which is widely adopted
More informationThe pneumatic circuit and parts' list needed to perform this operation are shown by Figure C.1.
Introduction In session 1 you have learned about pneumatic systems and their main components. In addition to that your lab instructor has introduced to you how to use FluidSIM software. During this appendix
More informationUniversal Fluid Power Trainer (UFPT)
Universal Fluid Power Trainer (UFPT) Milwaukee School of Engineering Applied Technology Center TM Department of Professional Education The UFPT is a modular, smart and unique fluid power and motion control
More information[You may download this article at: https://fluidsys.org/downloads/ ]
Fluidsys Training Centre, Bangalore offers an extensive range of skill-based and industry-relevant courses in the field of Pneumatics and Hydraulics. For more details, please visit the website: https://fluidsys.org
More informationElectric Power Technology Training Systems
Electric Power Technology Training Systems 8010-00 LabVolt Series Datasheet Festo Didactic en 120 V - 60 Hz 03/2019 Table of Contents General Description 3 Electric Power Technology Training Program 4
More informationCh 4 Motor Control Devices
Ch 4 Motor Control Devices Part 1 Manually Operated Switches 1. List three examples of primary motor control devices. (P 66) Answer: Motor contactor, starter, and controller or anything that control the
More informationEx. 1-1 Nacelle Familiarization and Safety Discussion
Exercise 1-1 Nacelle Familiarization and Safety EXERCISE OBJECTIVE When you have completed this exercise, you will be familiar with key components and safety aspects of the nacelle trainer. You will be
More informationUniversal Fluid Power Trainer (UFPT)
Universal Fluid Power Trainer (UFPT) The UFPT is a modular, smart and unique fluid power and motion control training unit. It contains an excellent integration of industrial-graded hardware and builtin
More informationDiscrete Control Logic. 1. Pneumatic circuits. - Low forces - Discrete, fixed travel distances - Rotational or reciprocating motion
Discrete Control Logic 1. Pneumatic circuits - Low forces - Discrete, fixed travel distances - Rotational or reciprocating motion Main components: compressor, valves, cylinders Pneumatic components: cylinders
More informationPneumatic Systems. Module 3: Logic Operations in Electropneumatics. IAT Curriculum Unit PREPARED BY. August 2008
Pneumatic Systems Module : Logic Operations in Electropneumatics PREPARED BY IAT Curriculum Unit August 2008 Institute of Applied Technology, 2008 2 Module : Logic Operations in Electro-pneumatics Module
More informationElectrical Power Systems 2014/15
www.hft-education.com 2014/15 Electrical Power Engineering is fundamental to maintaining and protecting global electricity supply and preventing catastrophic power failures. With the current investment
More informationModern Industrial Pneumatics. Design and Troubleshooting Industrial Pneumatics PN111 PN121
Modern Industrial Pneumatics Design and Troubleshooting Industrial Pneumatics PN111 PN121 Drives: Cylinders for different drive purposes Valves: Various valve types (pneumatically/electrically controlled,
More informationMF100 SPECIFICATIONS & FEATURES
MF100 SPECIFICATIONS & FEATURES Introduction The MF100 series simulators are the most technologically advanced hydraulic training systems currently available for teaching Basic Hydraulics through Advanced
More informationTraining Systems for Hydraulics
Training Systems for Hydraulics 2 Training Systems for Hydraulics Training Systems for Hydraulics 3 Drive & Control Academy 4 Study topics 7 Overview 10 On/off hydraulics 12 Proportional servo valve technology
More informationFamiliarize yourself with the pressure loss phenomenon. The Discussion of this exercise covers the following point:
Exercise 3-2 Pressure Loss EXERCISE OBJECTIVE Familiarize yourself with the pressure loss phenomenon. DISCUSSION OUTLINE The Discussion of this exercise covers the following point: Pressure loss Major
More informationIndustrial Mechanic (Millwright) Level 3
Industrial Mechanic (Millwright) Level 3 Rev. September 2005 Industrial Mechanic (Millwright) Unit: G5 Prime Movers I Diesel 1 Level: Duration: Three 60 hours Theory: 20 hours Practical: 40 hours Overview:
More informationBasic Renewable Energy Training System
Basic Renewable Energy Training System LabVolt Series Datasheet Festo Didactic en 220 V - 60 Hz 07/2018 Table of Contents General Description 2 Courseware 3 Modular Design Approach 4 Features & Benefits
More informationMultiple Pump Systems
Industrial Maintenance Pumps Training System Multiple Pump Systems Job Sheets - Courseware Sample 37895-F0 Order no.: 37895-30 First Edition Revision level: 08/2015 By the staff of Festo Didactic Festo
More informationA Electric Power / Controls SMART GRID TECHNOLOGIES 0.2 kw
A Electric Power / Controls SMART GRID TECHNOLOGIES 0.2 kw TRAINING SYSTEM, MODEL 8010-C Shown with optional host computer. The Smart Grid Technologies Training System, Model 8010-C, combines Lab-Volt's
More informationSARDAR RAJA COLLEGE OF ENGINEERING, ALANGULAM
SARDAR RAJA COLLEGE OF ENGINEERING, ALANGULAM DEPARTMENT OF MECHANICAL ENGINEERING MICRO LESSON PLAN SUBJECT : MECHATRONICS CODE : ME 71 CLASS : IV Year / VII SEM DEPT. OF MECHANICAL ENGG. ME71 MECHATRONICS
More informationiron horse Equipment Catalog IndustrialTrainingEquipment.com Industrial Training Equipment
iron horse Industrial Training Equipment Equipment Catalog IndustrialTrainingEquipment.com We build the most effective industrial classroom trainers at the best price. Guaranteed. -Rod Alsman, President
More informationProcess switches and PLC circuits
Process switches and PLC circuits This worksheet and all related files are licensed under the Creative Commons Attribution License, version 1.0. To view a copy of this license, visit http://creativecommons.org/licenses/by/1.0/,
More informationDS4NA Fluid Power Training System
Drive & Control Academy DS4NA Fluid Power Training System 2 Bosch Rexroth DS4NA Fluid Power Training System The data specified herein only serves to describe the product. No statements concerning a certain
More informationActuators and directional control valves
Actuators and directional control valves 1. Differentiate between the main types of directional control valves. 2. Demonstrate the function and uses of 3/2 way valve, push button actuated. 3. Demonstrate
More informationUpgrade your blow molding machine with one of our two new state of the art machine control systems.
Upgrade your blow molding machine with one of our two new state of the art machine control systems. Uniloy is proud to introduce the Allen Bradley Compact Logix, and B&R Control Packages developed for
More informationMechatronics systems
Mechatronics systems www.matrixtsl.com 1 HP4550 Solution Description This solution contains products from our Locktronics, E-blocks and Automatics ranges. The pack includes a wide variety of resources
More informationPrinciples of Doubly-Fed Induction Generators (DFIG)
Renewable Energy Principles of Doubly-Fed Induction Generators (DFIG) Courseware Sample 86376-F0 A RENEWABLE ENERGY PRINCIPLES OF DOUBLY-FED INDUCTION GENERATORS (DFIG) Courseware Sample by the staff
More informationTest. What type of cylinder would you use? A. Single-acting cylinder B. Double-acting cylinder Answer:
Test This test allows you to establish whether your basic knowledge of pneumatic controls is sufficient for you to attend the advanced course P or whether you should attend the basic level course P. The
More informationHYDROMODEL-200. Implements and controls hydraulic and electro-hydraulic circuits. Transparent Hydraulics - Electro-hydraulics
HYDROMODEL-200 Transparent Hydraulics - Electro-hydraulics Hydraulic and electro-hydraulic technology at a glance Implements and controls hydraulic and electro-hydraulic circuits www.smctraining.com training@smctraining.com
More informationPhotovoltaic Solar Energy Modular Trainers
Photovoltaic Solar Energy Modular Trainers Products Products range Units 5.-Energy Technical Teaching Equipment MINI-EESF. Photovoltaic Solar Energy Modular Trainer (Complete) MINI-EESF/M. Photovoltaic
More informationUPGRADE YOUR BLOW MOLDING MACHINE WITH ONE OF OUR TWO NEW STATE OF THE ART MACHINE CONTROL SYSTEMS.
UPGRADE YOUR BLOW MOLDING MACHINE WITH ONE OF OUR TWO NEW STATE OF THE ART MACHINE CONTROL SYSTEMS. Uniloy is proud to introduce the Allen Bradley Compact Logix, and B&R Control Packages developed for
More informationWorksheet 1 - Simple digital sensors 3. Worksheet 2 - Lamps and simple actuators 6. Worksheet 3 - Using transistors 8. Worksheet 4 - Relays 10
Contents Worksheet 1 - Simple digital sensors 3 Worksheet 2 - Lamps and simple actuators 6 Worksheet 3 - Using transistors 8 Worksheet 4 - Relays 10 Worksheet 5 - Analogue inputs 12 Worksheet 6 - Fault
More informationFesto Didactic: LabVolt Series Training Systems A whole new range of possibilities
Festo Didactic: LabVolt Series Training Systems A whole new range of possibilities Sharing Your Commitment to Technical Education Origins of the LabVolt Series by Festo Didactic For the last 50 years,
More informationBasic voltmeter use. Resources and methods for learning about these subjects (list a few here, in preparation for your research):
Basic voltmeter use This worksheet and all related files are licensed under the Creative Commons Attribution License, version 1.0. To view a copy of this license, visit http://creativecommons.org/licenses/by/1.0/,
More informationEngineering Diploma Resource Guide ST280 ETP Hydraulics (Engineering)
Engineering Diploma Resource Guide ST80 ETP Hydraulics (Engineering) Introduction Hydraulic systems are a fundamental aspect of engineering. Utilised across a variety of sectors including aviation, construction,
More informationExercise 3-1. Basic Hydraulic Circuit EXERCISE OBJECTIVE DISCUSSION OUTLINE DISCUSSION. Complete hydraulic circuit
Exercise 3-1 Basic Hydraulic Circuit EXERCISE OBJECTIVE When you have completed this exercise, you will be familiar with the hydraulic schematic and components of the nacelle trainer. You will identify
More informationExercise 3. Battery Charging Fundamentals EXERCISE OBJECTIVE DISCUSSION OUTLINE DISCUSSION. Charging fundamentals
Exercise 3 Battery Charging Fundamentals EXERCISE OBJECTIVE When you have completed this exercise, you will be familiar with the effects of charge input, charge rate, and ambient temperature on the voltage
More informationIndustrial Maintenance. Basic Controls. Courseware Sample F0
Industrial Maintenance Basic Controls Courseware Sample 39163-F0 Order no.: 39163-10 First Edition Revision level: 04/2015 By the staff of Festo Didactic Festo Didactic Ltée/Ltd, Quebec, Canada 2007 Internet:
More informationTECHNICAL PAPER 1002 FT. WORTH, TEXAS REPORT X ORDER
I. REFERENCE: 1 30 [1] Snow Engineering Co. Drawing 80504 Sheet 21, Hydraulic Schematic [2] Snow Engineering Co. Drawing 60445, Sheet 21 Control Logic Flow Chart [3] Snow Engineering Co. Drawing 80577,
More informationrenewable energy and energy efficiency
renewable energy and energy efficiency Integral equipment for the classroom-workshop Our in-depth knowledge of the educational world allows us to design classroomworkshops configured down to the last detail
More information0.2 kw Electric Power Transmission Training System
0.2 kw Electric Power Transmission Training System LabVolt Series Datasheet Festo Didactic en 220 V - 50 Hz 07/2018 Table of Contents General Description 2 Topic Coverage 3 Features & Benefits 3 List of
More information