2018 AST HIGH SCHOOL CONTEST STATIONS

Size: px

Start display at page:

Download "2018 AST HIGH SCHOOL CONTEST STATIONS"

Anis Gardner
6 years ago
Views:

1 2018 AST HIGH SCHOOL CONTEST STATIONS TASK S1 Vehicle HVAC System and Testing S2 Vehicle Engine Performance & Testing S3 Vehicle Body Electrical and Testing ON-VEHICLE WORKSTATIONS Students will identify components related to an automotive air conditioning system and answer questions related to the general understanding of system operation. Students will then be expected to perform a diagnosis of a simulated fault using a repair order, supplied service information, pressure gauges, and thermometer readings. Students will diagnose and repair faults related to the engine control and emissions system. This includes drivability, MIL-ON, DTC and Engine Control Module related issues. Students will be expected to use basic diagnostic strategies to identify root cause, read schematics/wiring diagrams, correctly connect and use test equipment. Diagnose electrical circuits related to electrical circuits on a car. Students will be expected to read electrical wiring diagrams, correctly connect test equipment, and use diagnostic strategies to identify root cause. Station will have a bugged car with a repair order GDS 2 SPECIAL TOOLS PROVIDED Consult 3 Plus S4 Tire/Wheel Service BENCH WORKSTATIONS Contestants will demonstrate their knowledge tire/wheel vibrations. John Beam Wheel Balancer 4/6/2018 Page 1 of 9

2 S5 Environment, Health and Safety Students demonstrate their knowledge of automotive workrelated safety equipment, environmental issues, procedures and familiarity with SDS and PPE. Contestant must bring printed copy of the S/P2 Mechanical Safety and Mechanical Pollution Prevention certificates to the Contestant Orientation Meeting. Certificates will NOT be accepted after the Contestant Orientation Meeting. June 22, pm CST cutoff for free access to S/P2. Access to S/P2 e- learning program is provided free of charge to competitors in the SkillsUSA Competition. In addition, complimentary access to Land That Job: Interview Skills for Students will be provided. BEFORE the competition, instructors are asked to contact S/P2 by to receive their students log-on information for the S/P2 website. Students MUST COMPLETE the S/P2 courses IN ADVANCE of the competition. Any questions, call toll free: /6/2018 Page 2 of 9

3 S6 Electrical / Electronic Systems S7 Job Interview S8 Steering and Suspension S9 Brake Service & S10 Manual Drive Train Service and S11 Automatic Transmission Service Students will take resistance, amperage, voltage, and voltage drop measurements on a bench circuit board. Students will also demonstrate proper circuit construction from a wiring diagram incorporating all components of a normal circuit as well as circuit failure diagnosis. Students demonstrate they can clearly and completely fill out a job application, communicate clearly and effectively and have appropriate professional behaviors during the job interview. Printed copy of resume required. Be familiar with and answer questions about steering and suspension components, tire information and wear patterns, wheel alignment procedures, printouts and diagnosis. Exhibit the ability to properly use printed reference materials and work orders/printouts. Students will demonstrate their ability to inspect, service, and determine necessary action related to disc and drum brake systems. Part and component identification, inspection, measurement, disassembly and assembly may be required. Students will demonstrate understanding of basic manual transmission/transaxle service, mechanical adjustments, parts identification, power flow, normal measurements and inspection. Removal and replacement of components may be required. Students will demonstrate understanding of basic automatic transmission service, mechanical adjustments, parts identification, normal measurements and inspection. Removal and replacement of components may be required. ConsuLab (4) CL Ohm s Law Trainers Contestant must bring at least 2 printed copies of Resume to the Contestant Orientation Meeting. ConsuLab (4) EM Fourwheel Honda ABS trainer Mitchell 1- ShopKey Online Service Information. 4/6/2018 Page 3 of 9

4 S12 Engine Mechanical S13 Written Test Contestants will demonstrate their knowledge of the internal combustion gasoline engine by identification of various engine components and answering questions about engine mechanical operation. Contestants will use precision measuring tools and OEM Service Information to inspect various engine components. Given by ASE, this 100 question written test will test the student s technical knowledge of automobile diagnosis and repair in the vehicle system specialty areas of: Engine Repair Automatic Transmission/Transaxle Manual Drive Train and Axles Suspension and Steering Brakes Electrical/Electronic Systems Heating and Air Conditioning Engine Performance Test booklet answer sheet, pencil. *Career / Job Information Fair to follow student orientation 4/6/2018 Page 4 of 9

5 2018 AST POST SECONDARY CONTEST STATIONS TASK P1 Vehicle HVAC System and Testing P2 Vehicle Engine Performance and Testing P3 Vehicle Wheel Alignment ON-VEHICLE WORKSTATIONS Perform diagnosis and repair of a problem related to the HVAC/Climate Control system on a CAN bus vehicle. Students will be expected to read schematics, locate information in service information, correctly connect and use test equipment, and use diagnostic strategies to identify root cause. Student will be required to verify proper operation. Car is bugged. Parts replacement. Use of repair order. Students diagnose faults related to the engine control module, drivability and emissions, using service information and diagnostic equipment. Students will be expected to read schematics, locate information in service information, correctly connect and use test equipment, and use diagnostic strategies to identify root cause. Car is bugged. Use of repair order. Students will demonstrate their understanding of wheel alignment angles, setup and use of alignment measuring equipment, and diagnosis of customer concerns including vehicle handling and tire wear issues. Use of repair order. SPECIAL TOOLS PROVIDED A/C Pressure gauges. wi-tech 2.0 Diagnostic application OEM Service procedures and diagnostic strategies Toyota Techstream Hunter will provide WA600 consoles with Hawkeye Elite sensors running Winalign 15.0 software. 4/6/2018 Page 5 of 9

6 P4 Hybrid Safety P5 Environment, Health and Safety P6 Electrical / Electronic Systems BENCH WORKSTATIONS Perform isolation of high voltage system and verify that the voltage has dropped to a safe level. Students demonstrate their knowledge of automotive workrelated safety equipment, environmental issues, procedures and familiarity with SDS and PPE. Contestant must bring printed copy of the S/P2 Mechanical Safety and Mechanical Pollution Prevention certificates to the Contestant Orientation Meeting. Certificates will NOT be accepted after the Contestant Orientation Meeting. June 22, pm CST cutoff for free access to S/P2. Students will take resistance, amperage, voltage, and voltage drop measurements on a bench circuit board. Students will also demonstrate proper circuit construction from a wiring diagram incorporating all components of a normal circuit as well as circuit failure diagnosis. Access to S/P2 e- learning program is provided free of charge to competitors in the SkillsUSA Competition. In addition, complimentary access to Land That Job: Interview Skills for Students will be provided. BEFORE the competition, instructors are asked to contact S/P2 by info@sp2.org to receive their students log-on information for the S/P2 website. Students MUST COMPLETE the S/P2 courses IN ADVANCE of the competition. Any questions, call toll free: Model 18002TT GM S.E.T. Troubleshooting Trainer 4/6/2018 Page 6 of 9

7 P7 Customer Service P8 Electrical P9 Brake Service and Act in an appropriate and professional manner. Inspect and diagnose components in the Timing belt system. Clearly and effectively communicate with the customer information on the diagnosis and repair of their vehicle. Printed copy of resume required. Electrical diagnosis through code retrieval and scope pattern interpretation. Basic scan-tool and Labscope operation. Inspection, diagnosis, and repair of the brake system and ABS Wheel Speed Sensors. Must bring at least 2 printed copies of Resume to the Contestant Orientation Meeting. Snap-on (VERUS Pro/VERUS Edge) For additional information go to: com/diagnostics/us/cc.htm ATech Trainer: Model 2652 MODIS Edge com/diagnostics/us/cc/knowledge - Base.htm?FB_Values=F 1_C6_A141!F1_C31_A2! F3_C6_A141!F3_C31_A 2!F4_C6_A141&platformImage=%2Fdisplay%2F1060%2FCustC are%2fmodisedge.png &searchintype=train- ing&platform- Name=MODIS%20Edg e 4/6/2018 Page 7 of 9

8 P10 Manual Drive Train Service and P11 Automatic Transmission Service and P12 Engine Mechanical Service, diagnosis, and Precision Measurement Students will demonstrate understanding of basic manual transmission/transaxle service, mechanical adjustments, parts identification, power flow, normal measurements and inspection. Removal and replacement of components may be required. Demonstrate proper use of electronic service information to complete the above task. Service, testing and diagnosis of automatic transmission or transaxle drive train components. Students will demonstrate understanding of basic transmission service, diagnosis of solenoids and sensor, mechanical adjustments, parts identification, normal measurements and inspection. Perform bench diagnosis of transmission. Identify faulty components/circuits. Student will demonstrate understanding of basic engine service, diagnosis, and mechanical understanding. Use various tools and Repair Manual to locate specification and engine repair information. Properly diagnose and repair the engine assembly. Mitchell 1- ShopKey Online Service Information. 4/6/2018 Page 8 of 9

9 P13 Written Test Given by ASE, this 100 question written test will test the student s technical knowledge of automobile diagnosis and repair in the vehicle system specialty areas of: Engine Repair Automatic Transmission/transaxle Manual Drive Train and Axles Suspension and Steering Brakes Electrical/Electronic Systems Heating and Air Conditioning Engine Performance Test Booklet answer sheet, pencil. *Career / Job Information Fair to follow student orientation 4/6/2018 Page 9 of 9

2016 NH Automotive Service Technology (AST) High School Contest Stations

2016 NH Automotive Service Technology (AST) High Module School Contest Stations ON-VEHICLE or ON-VEHICLE SIMULATION WORKSTATIONS Items PROVIDED S1 Vehicle HVAC System and Testing Contestants will be required