Appendix 1 List of Newly Established and Revised JIS Publicly Notified on February 20, 2019
|
|
- Clarissa Heath
- 5 years ago
- Views:
Transcription
1 Appendix 1 List of Newly Established and Revised JIS Publicly Notified on February 20, 2019 < in and telephone number> (direct line: ) (direct line: ) 1. Newly established standards Household reverse osmosis water purifiers Test method for methylene blue adsorption on bentonite and acid clay Earth-moving machinery-electrical safety of machines utilizing electric drives and related components and systems-part 1: General requirements Earth-moving machinery-electrical safety of machines utilizing electric drives and related components and systems-part 2: Particular requirements for externally-powered machines Earth-moving machinery-electrical safety of machines utilizing electric drives and related components and systems-part 3: Particular requirements for self-powered machines Earth-moving machinery-lifting and tying-down attachment points- Performance requirements that prepared the draft S3242 Japan water Purifier Z2451 National Institute of Advanced Industrial Science and Technology A Japan Construction Machinery and Construction A Japan Construction Machinery and Construction A Japan Construction Machinery and Construction A8426 Japan Construction Machinery and Construction in
2 that prepared the draft Reciprocating internal combustion B Japan Internal engines-vocabulary of components and Combustion Engine systems-part 10: Ignition systems Federation Reciprocating internal combustion B Japan Internal engines-vocabulary of components and Combustion Engine systems-part 11: Fuel systems Federation Reciprocating internal combustion B Japan Internal engines-vocabulary of components and Combustion Engine systems-part 12: Exhaust emission Federation control systems Portable microbe imaging scope B7271 Japanese Standards Flowmeter for disd water- B7557 Japan Measuring Measuring instruments used in Instruments Federation transaction or certification Compressed natural gas fuel measuring systems for vehicles-part 1: Metrological and technical requirements B Japan Measuring Instruments Federation Compressed natural gas fuel measuring B Japan Measuring systems for vehicles-part 2: Instruments Federation Metrological controls and performance tests Cleanrooms and associated controlled B Japan Air Cleaning environments-part 1: Classification of air cleanliness by particle concentration Cleanrooms and associated controlled B Japan Air Cleaning environments-part 2: Monitoring to provide evidence of cleanroom performance related to air cleanliness by paritcle concentration in
3 that prepared the draft Electroacoustics-Sound level meters- C The Institute of Noise Part 3: Periodic tests Control Engineering of Japan Safety requirements for insulated C3010 The Japanese Electric wires, cables, and heating wires for Wire & Cable Makers warm nursery Components for low-voltage surge C5381- Japan Electronics and protection-part 351: Performance 351 Information Technology requirements and test methods for Industries telecommunications and signalling network surge isolation transformers (SIT) Connectors for electronic equipment- C Japan Electronics and Tests and measurements-part 7-2: 2 Information Technology Impact tests (free connectors)-test 7b: Industries Mechanical strength impact Connectors for electronic equipment- C Japan Electronics and Tests and measurements-part 9-2: 2 Information Technology Endurance tests-test 9b: Electrical Industries load and temperature Fiber optic switches-part 2: Test C Optoelectronics Industry Methods and Technology Development Optical isolators-part 2: Test methods C Optoelectronics Industry and Technology Development Marking codes for resistors and C60062 Japan Electronics and capacitors Information Technology Industries in
4 that prepared the draft in Photovoltaic devices-procedures for C60891 The Japan Electrical temperature and irradiance corrections to measured I-V characteristics Fiber optic interconnecting devices and C Optoelectronics Industry passive components-basic test and 3-45 and Technology measurement procedures-part 3-45: Development Examinations and measurements- Attenuation of random mated multifiber connectors Fuel cell technologies-part 3-100: C The Japan Electrical Stationary fuel cell power systems Safety Fuel cell technologies-part 3-200: C The Japan Electrical Stationary fuel cell power systems Performance test methods Fuel cell technologies-part 3-201: C The Japan Electrical Stationary fuel cell power systems Performance test methods for small fuel cell power systems Fuel cell technologies-part 3-300: C The Japan Electrical Stationary fuel cell power systems Installation Fuel cell technologies-part 6-200: C The Japan Electrical Micro fuel cell power systems Performance test methods
5 Test method for erosion of wave soldering equipment using molten lead-free solder alloy-part 2: Erosion test method for metal materials with surface processing Test method for erosion of wave soldering equipment using molten lead-free solder alloy-part 3: Selection guidance of erosion test methods AC and/or DC-supplied electronic controlgear for dis lamps (excluding fluorescent lamps)- Performance requirements for low frequency square wave operation Low-voltage switchgear and controlgear-part 7-3: Ancillary equipment-safety requirements for fuse terminal blocks Appliance couplers for household and similar general purposes-part 3: Standard sheets and gauges General safety requirements for wiring devices Photovoltaic devices-part 1: Measurement of photovoltaic currentvoltage characteristics Photovoltaic devices-part 8: Measurement of spectral responsivity of a photovoltaic (PV) device that prepared the draft C Japan Electronics and Information Technology Industries C Japan Electronics and Information Technology Industries C62811 Japan Lighting Manufacturers C Nippon Electric Control 3 Equipment Industries C Japanese Standards C8300 Japan Electrical Wiring System Industries C The Japan Electrical C The Japan Electrical in
6 Interrelationship of solar cell module and array Light conveyor belts-determination of the maximum tensile strength Textiles-Evaluation method of light absorption and heat generation Standard fabrics for measuring mechanical action (WAT cloth) Textiles-Determination of heat-ray shielding performance Fine ceramics (Advanced ceramics, advanced technical ceramics)-test method for determiantion of phenol oxidative decomposition performance of photocatalytic materials by total organic carbon analysis IT asset management-part 3: Entitlement schema IT asset management-part 4: Resource utilization measurement Information technology-database languages-sql-part 4: Persistent Stored Modules (SQL/PSM) that prepared the draft C8957 The Japan Electrical K Japan Machinery Belt L1926 Japan Textile Evaluation Technology Council L1929 Japan Textile Evaluation Technology Council L1951 Japan Chemical Fibers R1711 Japan Fine Ceramics X Information Processing Society of Japan X Information Processing Society of Japan X Information Processing Society of Japan in
7 that prepared the draft Information technology-cloud X Information Processing computing-service level Society of Japan agreement(sla)framework-part 1: Overview and concepts Carry bags made of polyethylene film Z1718 Japanese Standards in 2. Revised standards (Total standards newly established:49 ) that Electromagnetic compatibility C The Institute of (EMC)-Part 3-2: Limits-Limits for electrical Engineers of harmonic current emissions Japan (equipment input current 20 A per phase) Secondary lithium cells and batteries C Battery of for use in industrial applications-part Japan 2: Tests and requirements of safety Geological map-symbols, colors, A0204 National Institute of patterns, terms, and presentation of Advanced Industrial legend Science and Technology Vector-digital geological-map-quality A0205 National Institute of requirements and subject attribute Advanced Industrial codes Science and Technology Ready-mixed concrete A5308 National Federation of Ready-Mixed Concrete Industrial s in
8 that Steel pipe piles A5525 The Japan Iron and Steel pipe sheet piles A5530 The Japan Iron and Roof components for terrace of A6602 Japan Exterior Industry dwellings Rolling bearings-boundary B The Japan Bearing dimensions, geometrical product Industry specifications(gps) and tolerance values of needle roller bearings-part 2: Drawn cup without inner ring Industrial-process control valves-part B Japan Valve 2-1: Flow capacity-sizing equations for fluid flow under installed conditions Industrial-process control valves-part B Japan Valve 2-4: Flow capacity-inherent flow characteristics and rangeability Industrial-process control valves- B Japan Valve Part 7: Control valve data sheet Test conditions for numerically B Japan Machine tool controlled turning machines and Builders' turning centres-part 5: Accuracy of speeds and interpolations Socket and plug for camera flash B7102 Camera & Imaging synchronization Products in
9 that Shutter cable release tips and sockets B7104 Camera & Imaging for cameras Products Photographic lens-front lens barrels B7111 Camera & Imaging up to 127 mm-dimensions important Products to the connection of auxiliaries Automated measuring systems for B7993 Japan Electric flue gas components using nonextractive Measuring Instruments methods Centrifugal water chillers B8621 The Japan Refrigeration and Air Conditioning Industry Hydraulic fluid power-fire-resistant B9938 Japan Fluid Power (FR) fluids-requirements and guidelines for use Packaging of components for C Japan Electronics and automatic handling-part 2: Tape Information packaging of components with Technology Industries unidirectional leads on continuous tapes Safety requirements for electrical C Japan Electric equipment for measurement, control, Measuring Instruments and laboratory use-part 1: General requirements Safety requirements for electrical C Japan Electric equipment for measurement, control Measuring Instruments and laboratory use-part 31: Safety requirements for hand-held and handmanipulated probe assemblies for electrical test and measurement in
10 that Resin based reactive compounds used C2105 Japan Electrical for electrical insulation-methods of Insulating and test Advanced Performance Materials Industrial Methods of test for permanent magnet C2501 The Institute of electrical Engineers of Japan Materials for permanent magnet C2502 The Institute of electrical Engineers of Japan Test methods for electrical steel strip C The Japan Electrical and sheet-part 3: Methods of measurement of the magnetic properties of electrical steel strip and sheet at medium frequencies Test methods for electrical steel strip C The Japan Electrical and sheet-part 4: Methods of test for the determination of surface insulation resistance of electrical strip and sheet Cold-rolled grain-oriented electrical C2553 The Japan Electrical steel strip and sheet delivered in the fully-processed state Aluminium conductors steel C3110 The Japanese Electric reinforced Wire & Cable Makers in
11 Uninterruptible power systems (UPS)- Part 2: Electromagnetic compatibility (EMC) requirements Safety requirements for electric energy storage equipment-part 2: Particular requirements for Separation type power conditioner Fixed capacitors for use in electronic equipment-part 1: Generic specification Fixed capacitors for use in electronic equipment-part 14: Sectional specification-fixed capacitors for electromagnetic interference suppression and connection to the supply mains Fixed capacitors for use in electronic equipment-part 18: Sectional specification-fixed aluminium electrolytic surface mount capacitors with solid (MnO2) and non-solid electrolyte Fixed capacitors for use in electronic equipment-part 4: Sectional specification-fixed aluminium electrolytic capacitors with solid (MnO2) and non-solid electrolyte Environmental testing-part 2-39: Tests-Tests and guidance: Combined temperature or temperature and humidity with low air pressure tests that C The Japan Electrical C The Japan Electrical C Japan Electronics and Information Technology Industries C Japan Electronics and Information Technology Industries C Japan Electronics and Information Technology Industries C Japan Electronics and Information Technology Industries C Japanese Standards in
12 Environmental testing-part 2-69: Tests-Test Te/Tc: Solderability testing of electronic components and printed boards by the wetting balance (force measurement) method Environmental testing-part 2-75: Tests-Test Eh: Hammer tests Audio, video and similar electronic apparatus-safety requirements Methods of measurement on receivers for AM and FM sound broadcasting transmissions Part 1: General considerations and methods of measurement, including audiofrequency measurements Methods of measurement on receivers for AM and FM sound-broadcasting emissions Part 2: Receivers for AM sound broadcasting emissions Methods of measurement on receivers for AM and FM sound broadcasting emissions Part 3: Receivers for FM sound broadcasting emissions Safety of transformers, reactors, power supply units and combinations thereof-part 1: General requirements and tests that C Japan Electronics and Information Technology Industries C Japanese Standards C6065 Japan Business Machine and Information System Industries C Japan Electronics and Information Technology Industries C Japan Electronics and Information Technology Industries C Japan Electronics and Information Technology Industries C Japanese Standards in
13 that Safety of transformers, reactors, C Japanese Standards power supply units and combinations thereof-part 2-20: Particular requirements and tests for small reactors Test methods of tuneable laser sources C6191 Optoelectronics Industry and Technology Development Silica glass multimode optical fibers C6832 Optoelectronics Industry and Technology Development Fiber ribbons C6838 Optoelectronics Industry and Technology Development Miscellaneous lampholders-part 1: C Japan Lighting General requirements and tests Manufacturers LED modules for general lighting- C8155 Japan Lighting Performance requirements Manufacturers Switches for household and similar C Japan Electrical fixed electrical installations-part 2-1: Wiring System Particular requirements-electronic Industries switches Plugs and socket-outlets for C Japan Electrical household and similar purposes-part Wiring System 1: General requirements Industries in
14 that Appliance couplers for household and C Japanese Standards similar general purposes-part 1: General requirements Electrical accessories-cable reels for C8284 Japan Electrical household and similar purposes Wiring System Industries Rigid steel conduits C8305 The Institute of Electrical Installation Engineers of Japan Pliable metal conduits C8309 The Institute of Electrical Installation Engineers of Japan Pliable plastics conduits C8411 The Institute of Electrical Installation Engineers of Japan Fittings for pliable plastics conduits C8412 The Institute of Electrical Installation Engineers of Japan Unplasticized polyvinyl chloride C8430 The Institute of (PVC-U) conduits Electrical Installation Engineers of Japan Fittings of unplasticized polyvinyl C8432 The Institute of chloride(pvc-u)conduits Electrical Installation Engineers of Japan in
15 Conduit systems for cable management-part 21: Particular requirements-rigid conduit systems Conduit systems for cable management-part 22: Particular requirements-pliable conduit systems Conduit systems for cable management-part 23: Particular requirements-flexible conduit systems Stationary lead-acid batteries-part 2-1: Valve regulated types-methods of test Stationary lead-acid batteries-part 2-2 : Valve regulated types- Requirements Secondary sealed nickel-cadmium cells and batteries for portable applications Secondary sealed nickel-metal hydride cells and batteries for portable applications Household and similar electrical appliances-safety-part 2-25: Particular requirements for microwave ovens, including combination microwave ovens that C The Institute of Electrical Installation Engineers of Japan C The Institute of Electrical Installation Engineers of Japan C The Institute of Electrical Installation Engineers of Japan C Battery of Japan C Battery of Japan C8705 Battery of Japan C8708 Battery of Japan C The Japan Electrical in
16 that Household and similar electrical C The Japan Electrical appliances-safety-part 2-90: Particular requirements for commercial microwave ovens Automobile parts-glossary of devices D0103 Society of Automotive and parts of electric equipment Engineers of Japan Lead-acid starter batteries D5301 Battery of Japan Vocabulary of automatic guided D6801 Japan Industrial vehicle systems Vehicles Carbon steel and molybdenum alloy G3103 The Japan Iron and steel plates for boilers and pressure vessels Manganese-molybdenum and G3119 The Japan Iron and manganese-molybdenum-nickel alloy steel plates for boilers and pressure vessels Hot-dip zinc-coated steel sheet and G3302 The Japan Iron and strip Hot-dip zinc-5 % aluminium alloycoated steel sheet and strip G3317 The Japan Iron and Hot-dip 55 % aluminium-zinc alloycoated G3321 The Japan Iron and steel sheet and strip Hot-dip zinc-aluminium-magnesium G3323 The Japan Iron and alloy-coated steel sheet and strip in
17 that Carbon steel pipes for pressure G3454 The Japan Iron and service Seamless steel tubes for drilling G3465 The Japan Iron and Heat-resistant steel bars and wire rods G4311 Stainless Steel Heat-resistant steel plate, sheet and G4312 Stainless Steel strip High carbon chromium bearing steel G4805 The Japan Iron and Wires, rods and cords for flame and H8261 Japan Thermal Spray arc thermal spraying Society Testing methods for industrial K0102 Japan Environmental wastewater Management for Industry Testing methods for water quality by K Japan Environmental flow analysis-part 1: Ammonium Measurement & nitrogen Chemical Analysis Testing methods for water quality by K Japan Environmental flow analysis-part 2: Nitrite nitrogen Measurement & and nitrate nitrogen Chemical Analysis in
18 that Testing methods for water quality by K Japan Environmental flow analysis-part 3: Total nitrogen Measurement & Chemical Analysis Testing methods for water quality by K Japan Environmental flow analysis-part 4: Orthophosphate Measurement & and total phosphorus Chemical Analysis Testing methods for water quality by K Japan Environmental flow analysis-part 5: Phenol index Measurement & Chemical Analysis Testing methods for water quality by K Japan Environmental flow analysis-part 6: Fluoride Measurement & Chemical Analysis Testing methods for water quality by K Japan Environmental flow analysis-part 7: Chromium (VI) Measurement & Chemical Analysis Testing methods for water quality by K Japan Environmental flow analysis-part 8: Anionic Measurement & surfactants Chemical Analysis Testing methods for water quality by K Japan Environmental flow analysis-part 9: Cyanide Measurement & compounds Chemical Analysis Testing methods of explosives K4810 Japan Explosive safety in
19 that Reagents for stability tests of K4822 Japan Explosive explosives Industry Ready mixed paints (Synthetic resin K5516 Japan Paint type) Manufacturers Anticorrosive paints for general use K5621 Japan Paint Manufacturers Lead-free, Chromium-free K5674 Japan Paint anticorrosive paints Manufacturers Textiles-Methods for determination of L Japan Textile certain aromatic amines derived from Evaluation Technology azo colorants-part 1: Detection of the Council use of certain azo colorants accessible with and without extracting the fibres Textiles-Methods for determination of L Japan Textile certain aromatic amines derived from Evaluation Technology azo colorants-part 3: Detection of the Council use of certain azo colorants, which may release 4-aminoazobenzene Iron ores-sampling and sample M8702 The Japan Iron and preparation procedures Conformity assessment-conformity Q1011 Japanese Standards assessment for Japanese Industrial Standards-Guidance on a third-party certification system for Ready-mixed concrete products in
20 that Conformity assessment-conformity Q1012 Japanese Standards assessment for Japanese Industrial Standards-Guidance on a third-party certification system for precast concrete products Information technology-security Q27000 Japanese Standards techniques-information security management systems-overview and vocabulary Testing method for transmittance, R3106 Flat Glass reflectance and emissivity of flat glass Manufacturers and calculation of total solar energy of Japan transmittance of glazing Calculation of thermal transmittance R3107 Flat Glass of glazing Manufacturers of Japan Chemical analysis method of cement R5204 Japan Cement by X-ray fluorescence Portland cement R5210 Japan Cement Portland blast-furnace slag cement R5211 Japan Cement Portland pozzolan cement R5212 Japan Cement Portland fly-ash cement R5213 Japan Cement in
21 that Ecocement R5214 Japan Cement Hospital grade outlet-sockets and T1021 The Institute of plugs Electrical Installation Engineers of Japan IT asset management-part 1: IT asset management systems-requirements Technical requirements for TAA to certify UTC-traceability Data migration method for optical disks for long-term data storage Information technology-digitally recorded media for information interchange and storage-test method for the estimation of lifetime of optical disks for long-term data storage Volatile corrosion inhibitor for iron and steel Metallic Materials - Uniaxial creep testing in tention - Method of testing X Information Processing Society of Japan X5094 National Institute of Information and Communications Technology X6255 Optoelectronics Industry and Technology Development X6256 Optoelectronics Industry and Technology Development Z1519 Japan of Corrosion Control Z2271 The Japan Iron and in
22 Glossary of terms used in Z8115 that Japanese Standards in dependability (Total standards revised:120 ) End of the document
Personal care robots - Part 1: Physical assistant robots for lumbar support Hypochlorous acid water producing apparatus
Appendix 1 List of Newly Established and Revised JIS Publicly Notified on October 20, 2017 < in and telephone number> (direct line: 03-3501-9283) (direct line: 03-3501-9287) 1. Newly established standards
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
17065:2012 to provide product conformity certification 1, Place des Alpes CH-1211 Geneva Switzerland Contact: Patricia Lumbreras Tel: +(511) 221 1159 E-Mail: patricia.lumbreras@sgs.com Locations where
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-19065-04-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 2017-05-11 to 2022-05-10 Date of issue: 2017-05-11
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 LABORATORY SERVICES, PETROTRIN Southern Main Road Pointe-A-Pierre, Trinidad, Trinidad & Tobago Peter Bhim Phone: 868 658 4200 CHEMICAL Valid To: November 30,
More informationProducts Under Mandatory Labeling with Self-Declaration of Conformity As required under Republic Act No (Consumer Act) HOUSEHOLD APPLIANCES
Products Under Mandatory Labeling with Self-Declaration of Conformity As required under Republic Act No. 7394 (Consumer Act) The following are the required information to be included in the label common
More informationAppendix A.1 Calculations of Engine Exhaust Gas Composition...9
Foreword...xi Acknowledgments...xiii Introduction... xv Chapter 1 Engine Emissions...1 1.1 Characteristics of Engine Exhaust Gas...1 1.1.1 Major Components of Engine Exhaust Gas...1 1.1.2 Units Used for
More informationNamibian Standards Institution (NSI) Standards Development Work Programme. August 2018
(NSI) Development Work Programme August 2018 This is the list of that are in development and those that are published. It will be updated regularly with the next update scheduled for. If you have any question
More informationA List of Standards Often Used for Designing Electrical Systems and for Specifying Equipment
Appendix B A List of Standards Often Used for Designing Electrical Systems and for Specifying Equipment Note... erence in {} brackets supersede the original references. B.1 INTERNATIONAL ELECTRO-TECHNICAL
More informationLIST OF PUBLISHED STANDARDS
Report : 08-0-6 Page o : Of 5 LST OF PUBLSHED STDRDS Total Count: 78 umber SS umber pproved mendment SBS/TC 066 SS 97:07 7.0 Electric cables - mpregnated paper-insulated 07-0-7 metal-sheathed cables for
More informationContents. Prefece. List of Acronyms «xxi. Chapter 1 History of Power Systems 1
Contents Prefece xv Author xix List of Acronyms «xxi Chapter 1 History of Power Systems 1 LI Thomas A. Edison (1847-1931) 5 1.2 Nikola Tesla (1856-1943) 7 1.3 Battle of AC versus DC 8 1.4 Today's Power
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-20575-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 2018-03-05 to 2021-07-28 Holder of certificate: innogy
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 BUREAU VERITAS CONSUMER PRODUCTS SERVICES MEXICO, S.A. DE C.V.-PUEBLA 1 Circuito del Sol 3905-01 Colonia Nuevo Amanecer Puebla, Puebla 72400, Mexico Alicia
More information2017/SOM3/SCSC/JRAC/010 Agenda Item: 6a
2017/SOM3/SCSC/JRAC/010 Agenda Item: 6a Mutual Recognition Arrangement on Conformity Assessment of Electrical and Electronic Equipment - APEC EEMRA Information Interchange Format Part 1 Thailand Purpose:
More informationPrice trends in 2007 for the CGPI and CSPI
Price trends in 2007 for the CGPI and CSPI (1)Corporate Goods Price (CGPI, Table1) The 2007 level of All commodities of Domestic Corporate Goods Price (DCGPI)was 104.0(2005=100). This was 1.8
More informationPRODUCT/SERVICE CLASSIFICATION CLASS 285 ELECTRICAL EQUIPMENT AND SUPPLIES (EXCEPT CABLE AND WIRE)
Please indicate which products and services your company can supply by checking the appropriate box(es). Check only the first box if your company can supply all of the products and services shown for this
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service High Street, Feltham, Middlesex, TW13 4UN, UK
Unit A Shears Way Brooklands Close Sunbury-on-Thames Middlesex TW16 7EE Contact: Mr Craig Stone Tel: +44 (0)1932 732103 Fax: +44 (0)1932 732113 E-Mail: craig.stone@intertek.com Website: SUMMARY OF ACCREDITATION
More informationIMPORTS SUBJECT TO SRI LANKA STANDARDS
IMPORTS SUBJECT TO SRI LANKA STANDARDS 0402.10 Skimmed Milk Powder SLS 731:Specification for Milk Powder 0402.21 Full Cream Milk Powder SLS 731:Specification for Milk Powder 0402.29 0402.99.01 Condensed
More informationLIST OF PUBLISHED STANDARDS
Report : 08-06-08 Page o : Of 8 LIST OF PUBLISHED STDRDS umber SS umber pproved mendment SBS/TC 069 SS 959-:06/RS 05-:0.0 Photovoltaic systems for use in individual homes, schools and clinics Part : 06--8
More informationSoftening point by Ring & Ball. Density and relative density of liquids by Hubbart pycnometer
Softening point by Ring & Ball Density and relative density of liquids by Hubbart pycnometer Distillation of petroleum Melting point of petroleum wax Precipitation number of lubricating oils Saponification
More informationTests conducted under the following industry standards for PermaFrost API ASHRAE ARI ASTM EPA ANSI UL. SINCE 1985 Quality Controlled Through Analysis
Tests conducted under the following industry standards for PermaFrost API ASHRAE ARI ASTM EPA ANSI UL SINCE 1985 Client: Powertron LLC Requested By: Mr. Tony Sgarbi Sample: 10% PermaFrost + 90% Report
More informationISO INTERNATIONAL STANDARD. Gas turbines Procurement Part 3: Design requirements
INTERNATIONAL STANDARD ISO 3977-3 Second edition 2004-08-15 Gas turbines Procurement Part 3: Design requirements Turbines à gaz Spécifications pour l'acquisition Partie 3: Exigences de conception Reference
More informationAustralian/New Zealand Standard
AS/NZS 3112:2011 AS/NZS 3112:2011 Australian/New Zealand Standard Approval and test specification Plugs and socket-outlets AS/NZS 3112:2011 This Joint Australian/New Zealand Standard was prepared by Joint
More informationAnnex to the Accreditation Certificate D PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D PL 18438 02 00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 11.03.2014 to 10.03.2019 Holder of certificate: Jürgen
More informationSYLLABUS FOR ELECTRICAL SUPERVISOR CERTIFICATE OF COMPETENCY (SCC MV) Electrical Engineering Paper (Written Test)
ANNEXURE I SYLLABUS FOR ELECTRICAL SUPERVISOR CERTIFICATE OF COMPETENCY (SCC MV) Electrical Engineering Paper (Written Test) Paper I & Paper II for General Category of S.C.C. Examination Paper I & Paper
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-17453-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 03.07.2017 to 02.07.2022 Holder of certificate: SPIE
More informationRecommended Practices for Installation for EC Directive 2014/30/EU Relating to EMC
Recommended Practices for Installation for EC Directive 2014/30/EU Relating to EMC 10/16 Supplement to Installation & Operating Manual Any trademarks used in this manual are the property of their respective
More informationSHEDULE 1(A) Serial No. Serial No. HS Codes Article Column III Article Column IV. HS Codes Article Column III Article Column IV
SHEDULE 1(A) 1 0402.21 0402.10 0402.29 2 0402.99.10 0402.99.90 Full Cream Milk Powder Low Fat Milk Powder Non-Fat (Skimmed) Milk Powder Condensed Milk SLS 731 Specification for Milk Powder SLS 179 Specification
More informationStationary Battery Safety An Overview of the Process of Verifying the Safety of Battery Systems
Stationary Battery Safety An Overview of the Process of Verifying the Safety of Battery Systems Laurie Florence Principal Engineer Batteries, Fuel Cells & Capacitors Laurie.b.florence@us.ul.com 1-847-664-3782
More informationASTM Methods that are feasible with Metrohm instruments
ASTM Methods that are feasible with Metrohm instruments Automotive ASTM D5827-09 Standard test method for analysis of engine coolant for chloride and other anions by ion Biofuels a) Biodiesel ASTM D664-09
More informationKorea Eco-label Standards EL764 Revised 19. JUL Ministry of Environment Batteries EL764:2012
Korea Eco-label Standards EL764 Revised 19. JUL. 2012 Ministry of Environment Batteries EL764:2012 http://www.me.go.kr Publisher: Minister of Environment Publication: 02. SEP. 2005 Ministry of Environment
More informationh Technical Product Data FW Pressure Pipe Systems
h Technical Product Data FW Pressure Pipe Systems E Engineering GmbH All rights reserved. Publication: 10/2012 All rights reserved. No part of this document may be reproduced or utilized in any form or
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SOUTHWEST RESEARCH INSTITUTE Office of Automotive Engineering Fuels and Lubricants Research Division 6220 Culebra Road, P.O. Drawer 28510 San Antonio, TX 78228-0510
More informationContents. Chapter No. Title Page No. 1 Overview of a Ship s Electrical System 1. 2 Electrical Safety 41
Chapter No. Title Page No. 1 Overview of a Ship s Electrical System 1 2 Electrical Safety 41 3 Electrical Equipment for Hazardous Areas 83 4 AC Distribution Systems 125 5 Emergency Power and Shore Supply
More informationElectric vehicle charging system
TECHNICAL REFERENCE (ICS 43.120) TECHNICAL REFERENCE FOR Electric vehicle charging system Published by SPRING Singapore 2 Bukit Merah Central Singapore 159835 SPRING Singapore Website: www.spring.gov.sg
More informationCLASSIFICATION NOTES. Type Testing Procedure for. Crankcase Explosion Relief Valves
CLASSIFICATION NOTES Type Testing Procedure for Crankcase Explosion Relief Valves Contents 1. Scope, Application 2. Recognized Standards 3. Purpose 4. Test Facilities 5. Explosion Test Process 6. Testing
More informationFiltration and separation technology. Filter housings, bags and cartridges
Filtration and separation technology Filter housings, bags and cartridges Filtration and separation technology 3 About us Lenzing Technik Filtration and separation technology Thirty years of experience
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60384-14 QC 302400 Third edition 2005-07 Fixed capacitors for use in electronic equipment Part 14: Sectional specification: Fixed capacitors for electromagnetic interference
More informationStandard Test Method for Sulfur in the Analysis Sample of Coal and Coke Using High-Temperature Tube Furnace Combustion
IAS Accreditation Number Company Name Address Contact Name Telephone +966-14-398-2118 Effective Date of Scope May 1, 2018 Accreditation Standard ISO/IEC 17025:2017 TL-743 Yanbu Industrial Area Yanbu, Madina
More informationOther DC motors; DC generators: Of an output not exceeding 750 W 5% kg and No
85.01 Electric motors and generators (excluding generating sets). 8501.10.00 Motors of an output not exceeding 37.5W 5% kg and No 8501.20.00 Universal AC/DC motors of an output exceeding 5% kg and No 37.5
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-12095-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 2015-07-16 to 2019-03-06 Holder of certificate: Weidmüller
More informationFriday Midterm EXAMINATION Fall 2018 CREDIT HOURS ENGINEERING PROGRAMS AIN SHAMS UNIVERSITY FACULTY OF ENGINEERING
HUM311 Engineering Management 176 HUMN362 Engineering Management 1 14:00 16:00 224, 261 CEP 011 Engineering Drawing (2) 247 14:00 16:00 901, 901A, 902A, 902B,904, 250 Friday 9-11-2018 PHM022 Waves, Electricity,
More informationDon't let the shadows of yesterday hide the sunshine of tomorrow Nandina Morris
Don't let the shadows of yesterday hide the sunshine of tomorrow. -------------- Nandina Morris Hybrid MPPT Solar Inverter Main Features Pure sine wave inverter Built-in MPPT solar charge controller Selectable
More informationCERTIFICATION BODY ACCREDITATION PROGRAM (CBAP) Scope of Accreditation
CERTIFICATION BODY ACCREDITATION PROGRAM (CBAP) Scope of Accreditation Accredited Legal Entity: Contact Name: Address: MET LABORATORIES, INC. Frank Casbolt 914 West Patapsco Avenue, Baltimore MD 21230-3432
More informationLIST OF PUBLISHED STANDARDS
Report : 08-05-0 Page o : Of LST OF PUBLSHED STDRDS Total Count: 59 umber SS umber nt pproved mendment SBS/TC 06 SS 787:005.0 Ophthalmic lenses 005-09-6 005-09-6 07-0-6 SS 97-:0.0 Signs for street and
More informationTECHNICAL SPECIFICATION
TECHNICAL SPECIFICATION IEC TS 62735-1 Edition 1.0 2015-08 colour inside Direct current (DC) plugs and socket-outlets for information and communication technology (ICT) equipment installed in data centres
More informationS4562C 1085 COMBI BOARD APPLICATION. Contents PRODUCT HANDBOOK. General
S4562C 1085 COMBI BOARD APPLICATION PRODUCT HANDBOOK The S4562C 1085 combi board is an integration of an on/off temperature control and an electronic ignition control. The S4562C 1085 combi board is intended
More informationQC/T Translated English of Chinese Standard: QC/T AUTOMOTIVE INDUSTRY STANDARD
QC/T 198- Translated English of Chinese Standard: QC/T198- www.chinesestandard.net Sales@ChineseStandard.net QC ICS 43.040.10 AUTOMOTIVE INDUSTRY STANDARD OF THE PEOPLE S REPUBLIC OF CHINA T 36 QC/T 198-
More informationFREQUENTLY ASKED QUESTIONS (FAQs)
FREQUENTLY ASKED QUESTIONS (FAQs) What are the Petrochemicals? Any chemical derived from crude oil,crude products or natural gas. Where the petrochemicals are used? In the manufacture of Synthetic rubber,
More informationSummary of Key Issues
Summary of Key Issues The Manufacturing Production Index (MPI) in April 2017 shrank by 1.7 percent from last month, but shrank by 0.5 percent from the same period of last year. The major shrinking industries
More informationFilter housings. Filter bags. Filter cartridges. Filtration and separation technology. Filtration equipment
Filter housings Filter bags Filter cartridges Filtration and separation technology Filtration equipment Filtration and separation technology 3 About us Lenzing Technik Filtration and separation technology
More informationDemonstrate knowledge of electrical theory for Electrical Service Technician B
Demonstrate knowledge of electrical theory for Electrical Service Technician B 10937 version 4 Page 1 of 5 Level 3 Credits 3 Purpose 'Electrical Service Technician B' (EST B) refers to a class of electrical
More informationProduct Manual. Installation Instructions for CHSM-230M Series Solar Module
Product Manual Installation Instructions for CHSM-230M Series Solar Module CHSM-230M series solar module is made of 60 pieces of 156 mm 156 mm crystalline solar cells in series with high efficiency, high
More informationImplementation and development of standards for Lithium-ion energy storage technologies within the South African context
Implementation and development of standards for Lithium-ion energy storage technologies within the South African context by Nico Rust, Nelson Mandela University uyilo EMTIP uyilo emobility Technology Innovation
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SOUTHWEST RESEARCH INSTITUTE Office of Automotive Engineering Fuels and Lubricants Research Division 6220 Culebra Road, P.O. Drawer 28510 San Antonio, TX 78228-0510
More informationBULK HANDLING CONSTRUCTION OF CONVEYOR BELT ROLLERS
BULK HANDLING CONSTRUCTION OF CONVEYOR BELT ROLLERS INDEX 4 PHYSICAL PROPERTIES OF THE MATERIALS 6 DETERMINATION OF THE LOAD 8 DESCRIPTIONS 30 Self-centering troughing triple set 31 Flat troughing sets
More information2-Year Limited Warranty. See the Users Manual for the full warranty.
1732/1734 Energy Logger Safety Information 2-Year Limited Warranty. See the Users Manual for the full warranty. Go to www.fluke.com to register your Product and find more information. A Warning identifies
More informationTrade of Metal Fabrication. Module 1: Basic Fabrication Unit 15: Electricity Phase 2
Trade of Metal Fabrication Module 1: Basic Fabrication Unit 15: Electricity Phase 2 Table of Contents List of Figures... 5 List of Tables... 6 Document Release History... 7 Module 1 Basic Fabrication...
More informationAFTER GAZETTING (WORKING DOCUMENT FOR A 3 YEAR PERIOD) DATE PAGE PARAGRAPH DESCRIPTION ORIGINATOR APPROVED
PART B-07 TITLE: SERVICE CONNECTIONS SPECIFICTION NO: B-07 INCEPTION DATE: AFTER GAZETTING (WORKING DOCUMENT FOR A 3 YEAR PERIOD) AMENDMENTS / REVISIONS DATE PAGE PARAGRAPH DESCRIPTION ORIGINATOR APPROVED
More informationSection 5: Electronics and Electrical Appliances Industry
Section 5: Electronics and Electrical Appliances Industry 5.1 Manufacture of electrical 5.1.1 Manufacture of advanced technology electrical 5.1.2 Manufacture of air conditioners, refrigerators, freezers,
More informationTabuchi Electric Inverter Quality & Reliability Overview February 2017
Tabuchi Electric Inverter Quality & Reliability Overview February 2017 Copyright 2017 Tabuchi Electric Company of America Limited. 1 Tabuchi Corporate History & Philosophy Established in 1925, Tabuchi
More informationNational Standard. of the People s Republic of China
Translated English of Chinese Standard: GB4793.1-2007 www.chinesestandard.net Sales@ChineseStandard.net ICS 19.080; 71.040.10 L 09 National Standard GB of the People s Republic of China GB 4793.1-2007
More informationEU RO Mutual Recognition Technical Requirements
1. PRODUCT DESCRIPTION... 1 2. DESIGN EVALUATION... 2 3. PRODUCTION REQUIREMENTS... 6 4. MARKING REQUIREMENTS... 6 5. TYPE APPROVAL CERTIFICATE CONTENT... 7 6. APPROVAL DATE AND REVISION NUMBER... 7 7.
More informationINTER PLANT STANDARDIZATION STEEL INDUSTRY
INTER PLANT STANDARDIZATION STEEL INDUSTRY IPSS SPECIFICATION FOR IPSS:1-04-027-11 MAGNETIC CLUTCH (FIRST REVISION) Corresponding IS does not exist Formerly : IPSS:1-04-027-93 0. FOREWORD 0.1 This Interplant
More informationSTS Directory Accreditation number: STS 0228
International standard: ISO/IEC 17025:2005 Swiss standard: SN EN ISO/IEC 17025:2005 TESTEX AG Schweizer Textilprüfinstitut Gotthardstrasse 61 CH-8027 Zürich Head: Responsible for MS: Dr. Jean-Pierre Haug
More informationSolar Storage Technologies Part of the BRE Trust
Solar Storage Technologies Steve Pester Part of the BRE Trust Smart Solar NSC 2015 Overview of next few minutes Challenges Some solutions Types of storage Main battery technologies How batteries behave
More informationUnitole UP kv Primary substations Motor control centres
Unitole UP 3.6-17.5 kv Primary substations Motor control centres Product Focus Air-insulated withdrawable switchgear with vacuum circuit-breakers and contactors Creating Solutions Eaton Holec creates power-engineering
More informationMineral Insulated Resistance Thermometers (RTD)
Mineral Insulated Resistance Thermometers (RTD) Electronic Temperature Measurement Data sheet : MIRTD/2012 Contents Page RTD Element Type 2 Conductors & Number of Wires 2 Probe Diameter 3 Length Types
More informationName of Laboratory : SGS CAMBODIA LABORATORY Accreditation Number : Testing : 1076 A-C, Street 371, Sangkat Stung Meanchey, Khan Meanchey,
Name of Laboratory Contact Person : Mr. Sopheak Chea Phone : + 855 23 967 888 Fax : - Email : Sopheak.Chea@sgs.com 1 Textiles - Colour fastness to light : ISO 105-B02 : 2014 Xenon-Arc BS EN ISO 105-B02
More informationMCF3 25CT Inrush-withstand
RoHS Pb Dimensions and construction: (mm) Case: End-cap substrate metal: End-cap primary plating: End-cap surface plating: Adhesive: Marking: Ceramic Copper t=0.25 mm Nickel plated, 0.5 μm or more Tin
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-18869-01-00 according to DIN EN ISO/IEC 17025:2005 Holder of certificate: ilf Forschungs- und Entwicklungsgesellschaft Lacke
More informationA Look at the 2017 NEC Significant Changes
A Look at the 2017 NEC Significant Changes A Look at the 2017 NEC Significant Changes Michael J. Johnston NECA James T. Dollard Local 98 Philadelphia Electrical JATC This session is eligible for 1 Continuing
More informationSFI SPECIFICATION 1.1 EFFECTIVE: NOVEMBER 9, 2001 *
SFI SPECIFICATION 1.1 EFFECTIVE: NOVEMBER 9, 2001 * PRODUCT: Replacement Flywheels and Clutch Assemblies 1.0 GENERAL INFORMATION 1.1 This SFI Specification establishes uniform test procedures and minimum
More informationElectrical Connections
Electrical Connections TABLE OF CONTENTS ABOUT DELTA SCIENCE MODULES Program Introduction................... iii Teacher s Guide..................... iv Delta Science Readers............... vi Equipment
More informationChapter 3. Direct Current Power. MElec-Ch3-1
Chapter 3 Direct Current Power MElec-Ch3-1 Overview Batteries Safety Precautions Marine Storage Battery Charging Systems Battery Utilization MElec-Ch3-2 Batteries Cells and Battery Battery Chemistry Primary
More informationOn_Disc. 2 o/c1 BS 7671 applies to a lift installations b highway equipment c equipment on board ships d electrical equipment of machines.
1 PAPER 4 Sample Questions - C&G 2382 17th Edition full paper D 1 o/c 1 - A recommendation for the interval to the first periodic inspection shall be made by: a the installation electrician. b the main
More informationTEXAS DEPARTMENT OF TRANSPORTATION GENERAL SERVICES DIVISION
TEXAS DEPARTMENT OF TRANSPORTATION GENERAL SERVICES DIVISION SPECIFICATION NO. AMENDED: NOVEMBER 2004** WARNING LIGHT SYSTEM, INCANDESCENT, LIGHTBAR PUBLICATION This specification is a product of the Texas
More informationCHEMCUT PARTS IDENTIFICATION GUIDE
CHEMCUT PARTS IDENTIFICATION GUIDE 1. Identify System Serial Number 2. Parts Identifer 3. Chemcut Nomenclature 4. Chemcut Gears 5. Componets And Materials Chemcut Corp. 500-1 Science Park Road. State College,
More informationISO INTERNATIONAL STANDARD. Hoists for the transfer of disabled persons Requirements and test methods
INTERNATIONAL STANDARD ISO 10535 Second edition 2006-12-15 Hoists for the transfer of disabled persons Requirements and test methods Lève-personnes pour transférer des personnes handicapées Exigences et
More informationBatteries & Fuel Cells Seminar. Seminar Program Topics. Seminar Schedule - April 7-8, full days. Seminar Location. In partnership with:
Batteries & Fuel Cells Seminar About Batteries & Fuel Cells Seminar The seminar program focuses on present and future needs of portable and stationary electrochemical energy sources and highlights the
More informationTable 3:List of Mandatory Omani Standards
2/3/1978 6/99 1/1977 - Precast concrete blocks 2/1982 - Aggregates from natural sources for concrete 3/1977 777/1997 Cement flooring tiles and wood base materials 4/1978 - Building sands from natural sources.
More informationDESIGN GUIDELINES LOW VOLTAGE SWITCHGEAR PAGE 1 of 5
DESIGN GUIDELINES LOW VOLTAGE SWITCHGEAR PAGE 1 of 5 1.1. APPLICABLE PUBLICATIONS 1.1.1. Publications listed below (including amendments, addenda, revisions, supplements, and errata), form a part of this
More informationVHG Labs, Inc. Standards and Supplies for Spectrochemical Oil Analysis
VHG Labs, Inc. Standards and Supplies for Spectrochemical Oil Analysis Metallo-Organic Standards from VHG Labs VHG Labs has been a provider of quality analytical products and services for over 25 years.
More informationInstallation manual. Modbus Interface DIII EKMBDXA7V1. Installation manual Modbus Interface DIII. English
Modbus Interface DIII EKMBDXA7V1 Modbus Interface DIII English 379 mm 0 C 100 mm 50 mm 50 mm 40 mm 87 mm 300 mm IP X0 50 mm 60 C 365 mm 124 mm Max. 100 mm Min. 1 2 3 1 www.daikineurope.com/support-and-manuals/product-information/
More informationBooks. Code of Practice for In-Service Inspection and Testing of Electrical Equipment (3rd edition) By IET Publication
Books Code of Practice for In-Service Inspection and Testing of Electrical Equipment (3rd edition) By IET Publication Available: 2008 Format: Paperback Product Code: PWR08630 ISBN: 978-0-86341-833-4 Pagination:
More information2017 MN FFA Ag Mechanics CDE Exam. Multiple Choice Bubble in the most correct answer. DO NOT WRITE ON EXAM
2017 MN FFA Ag Mechanics CDE Exam Multiple Choice Bubble in the most correct answer. DO NOT WRITE ON EXAM SKID STEER LOADER 1. This hydraulic pump can change output flow without a change in rpm. a. fixed
More informationMITRAS MATERIALS GMBH
MITRAS MATERIALS GMBH Friedrich-Ochs-Str. 2 92637 Weiden/Opf. Tel.: 0961 / 89-810 / 89-812 Fax: 0961 / 89-672 Directory of services L a b o r a t o r y MITRAS MATERIALS GMBH Edition 02/18 Rev. 08 page
More informationGeomembrane Test Methods
Appendix 2 Geomembrane Test Methods AMERICAN SOCIETY FOR TESTING AND MATERIALS (arranged by number) ASTM D-5 ASTM D-36 ASTM D-256 ASTM D-412 ASTM D-413 ASTM D-471 ASTM D-570 ASTM D-638 ASTM D-696 ASTM
More informationFuel Related Definitions
Fuel Related Definitions ASH The solid residue left when combustible material is thoroughly burned or is oxidized by chemical means. The ash content of a fuel is the non combustible residue found in the
More informationPTFE Lined Pipe and Fittings
Allied Supreme Corp. - 1 - PTFE Lined Pipe and Fittings Allied Supreme Corp. - 2 - Index Specification For PTFE Lined Pipe and Fittings..3 PTFE Lined Pipe 7 PTFE Lined 90 Elbow. 8 PTFE Lined 45 Elbow.9
More informationKey elements of the AS3000 Wiring standards and some of the recent changes.
Key elements of the AS3000 Wiring standards and some of the recent changes. Dean of Engineering Steve Mackay Worked for 30 years in Industrial Automation 30 years experience in mining, oil and gas, electrical
More informationIEEE* American National Standards
IEEE* American National Standards T. Basso, NREL** and IEEE SCC21 Secretary; M. Coddington, NREL; P. McNutt, NREL; and R. DeBlasio, NREL and IEEE SCC 21 Chair and IEEE Smart Grid POC Solar America Board
More informationSpecifications for New Underground Mobile Mining Equipment Underground Mobile Equipment Major Hazard Standard
WMC Environment, Health & Safety Management System Specifications for New Underground Mobile Mining Underground Mobile Major Hazard Standard MHS-05 DocsOpen Ref: 57401, 03/03/1999 Uncontrolled copy check
More informationADDITIONAL CUSTOMS DUTIES IMPOSED BY TURKEY SINCE 2011
1 - Woven fabrics Imposed through a "Safeguard" investigation Provisional: 22.07.2011 Definitive 15.09.2011 Concerning tariff codes in bold, duty entered into force after 90 days from 15 September Provisional
More informationMonthly Report on the Corporate Goods Price Index ( Preliminary Figures for July 2018 )
Research and Statistics Department Bank of Japan Report on the Corporate Goods Price FOR RELEASE 8:50 A.M. Friday, August 10, 2018 The Producer Price rose 0.5 percent from the previous. The index excluding
More informationEasy and safe installation
ATX LUMINAIRES 7 Easy and safe installation 1 2 3 Safety Plus : 1- Mounting can be completed with one hand 2- One handed opening using standard tool 3- Reflector swivels easy access 4- Terminal shield
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60884-1 Edition 3.1 2006-07 Edition 3:2002 consolidated with amendment 1:2006 Plugs and socket-outlets for household and similar purposes Part 1: General requirements IEC 2006
More informationSFI SPECIFICATION 1.2 EFFECTIVE: FEBRUARY 9, 2006* PRODUCT: Multiple Disc Clutch Assemblies for Vehicles with Naturally Aspirated Engines
SFI SPECIFICATION 1.2 EFFECTIVE: FEBRUARY 9, 2006* PRODUCT: Multiple Disc Clutch Assemblies for Vehicles with Naturally Aspirated Engines 1.0 GENERAL INFORMATION 1.1 This SFI Specification establishes
More informationFreezeFree TM Nitro Anti-Icing System GENERAL SPECIFICATIONS
I. GENERAL FreezeFree TM Nitro Anti-Icing System GENERAL SPECIFICATIONS The FreezeFree Nitro Anti-Icing System shall be designed and manufactured by Energy Absorption Systems, Inc., of Chicago, Illinois.
More informationOverhead transmission lines Spacers
= SVENSKA KRAFTNÄT SWEDISH NATIONAL GRID UNIT, BUSINESS AREA AEL, Asset Management Lines OUR REFERENCE TR05-08E DATE 2016-06-09 CONSU12TATIONS TECHNICAL GUIDELINE REVISION 3 APPROVED Overhead transmission
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17043:2010. ASTM INTERNATIONAL 100 Barr Harbor Drive West Conshohocken, PA Amy Meacock
SCOPE OF ACCREDITATION TO ISO/IEC 17043:2010 ASTM INTERNATIONAL 100 Barr Harbor Drive West Conshohocken, PA 19428 Amy Meacock 610 832 9688 PROFICIENCY TESTING PROVIDER Valid To: May 31, 2021 Certificate
More information