Namibian Standards Institution (NSI) Standards Development Work Programme. August 2018
|
|
- Thomasina Joleen Peters
- 5 years ago
- Views:
Transcription
1 (NSI) Development Work Programme August 2018 This is the list of that are in development and those that are published. It will be updated regularly with the next update scheduled for. If you have any question about any of the standards in the list, please Designation Project Title Sector Technical Development Stage Expected Secretariat Committee Publication NAMS/IEC Photovoltaic (PV) Systems testing, documentation and maintenance Part 1: Grid Connected Systems Documentation, commissioning, tests and inspection Renewable Energy TC 1 Public Comment NAMS/EN 81-20:2018 NAMS/EN 81-80:2018 Rules for the construction and installation of lifts lifts for the transport of persons and goods Part 20: Passenger and goods passenger lifts Rules for the construction and installation of lifts Existing lifts Part 80: Rules for the Lifts and Escalators TC 8/SC 1 Public Comment Lifts and Escalators TC 8/SC 1 Public Comment
2 NAMS/EN 81-21:2018 NAMS/EN 81-3:2000: : :2018 improvement of safety of existing passenger and goods passenger lifts Rules for the construction and installation of lifts lifts for the transport of persons and goods Part 21: new passenger and goods passenger lifts in existing building rules for the construction and installation of lifts Part 3: Electric and Hydraulic service lifts Dangerous Goods Design, Construction, testing, approval and maintenance of road vehicles and portable tanks Dangerous goodspackaging and large packaging for road and rail transport Part 1: Packaging Lifts and Escalators TC 8/SC 1 Public Comment Lifts and Escalators TC 8/SC 1 Public Comment Public Comment Public Comment
3 : : : : : : :2018 Dangerous goodspackaging and large packaging for road and rail transport Part 1: Large Packaging The Identification and classification of dangerous goods for transport by road and rail modes Dangerous Goods Operational Requirements Dangerous goods Intermediate bulk containers for road and rail transport Retro-reflective number plates for motor vehicles Part 1: Blank Plates (Aluminium) Retro-reflective number plates for motor vehicles Part 2: Number Plates (Aluminium) Rear under run protection device Public Comment Public Comment Public Comment Public Comment Public Comment Public Comment Public Comment
4 1496: :2018 Wheel flaps fitted to motor vehicles Lights and Light Signalling Devices installed on motor vehicles and trailers SANS :2006 Braking Part 1: General SANS :2007 SANS 10181:2003 SANS 1080:2002) SANS :2017 SANS :2018 Braking (Motor & Towed vehicles, designed for low speed or for use off public roads) Part 1: Low speed vehicles The measurement of noise emitted by road vehicles when stationary Restraining devices (safety belts) for occupants of adult build in motor vehicles (Revised requirements Retro-reflective and fluorescent warning signs for road vehicles Part 4: Retro-reflective chevron signs and decals dangerous goods Emergency information Public Comment Public Comment
5 SANS :2011 SANS 513:2005 NAMS/ISO 31000:2018 SANS :2014 SANS :2016 SANS 1841:2015 systems Part 1: Emergency information system for road transport dangerous goods Emergency information systems Part 3: Emergency response guides Retro-reflectors (reflex reflectors) Risk - Guidelines Masonry Cement Part 1: Composition, specifications and conformity criteria Masonry Cement Part 2: Test Methods Control of the quantity of contents in prepacked packages within the prescriptions of legal metrology legislation Risk Building Construction, Cement and Concrete Technologies Building Construction, Cement and Concrete Technologies TC 6 TC 6 Metrology TC 9 December 2018 October 2018 October 2018
6 SADCMEL Document 1 SADCMEL Document 2 NAMS/ISO FDNAMS/ISO 45001:2018 NAMS/IEC TS ed NAMS/ISO 22000:2018 Labelling prepacked products and general requirements for the sale of goods Tolerances permitted for the accuracy of measurements made in terms of legal metrology legislation including the measurement of goods when prepackaged or when measured at the time of sale or in pursuance of a sale and requirements for the inspection of prepackages Medical Laboratories Quality and Competence Occupational Health and System Solar photovoltaic Terms, definitions and systems Food Systems Metrology TC 9 Metrology TC 9 Quality Systems Occupational Health and TC 2 Publication TC 8 Publication 15 August 2018 ElectroTechnical TC 4 Publication 15 August 2018 Food TC 3 Publication 15 August 2018
7 1795-2:2018 NAMS/SANS 10047:2018 NAMS/SANS 10216:2018 NAMS/IEC ed NAMS/IEC ed any Organization in the food chain Road Traffic Law Enforcement Part 2 Marketing and Commercial Quality Control of Dates Fermented Cow s Milk products Yoghurt and other cultured milk products Standard for Bottled natural Water and bottled mineral water in Namibia The testing of motor vehicles for roadworthiness Evaluation of vehicle test stations Concentrator photovoltaic (CPV) modules and assemblies design type approval Communication Networks and Systems for power utility automation Part 7 410: Basic Metrology TC 9 Publication 15 August 2018 Food Food Food TC 3 Drafting October 2018 TC 3 Drafting December 2018 TC 3 Drafting December 2018 Published 16 July 2018 Published 16 July 2018
8 NAMS/IEC ed NAMS/IEC ed NAMS/IEC TS ed NAMS/IEC TS ed NAMS/IEC ed NAMS/IEC ed Communication structure Hydroelectric power plants Communication for monitoring and control Photovoltaic (PV) Array onsite measurement of current Photovoltaic (PV) Systems Characteristics of the utility interface Photovoltaic (PV) System performance Part 3: Energy Evaluation method Photovoltaic (PV) System performance Part 2: Capacity Evaluation method Photovoltaic (PV) System performance Part 1: Monitoring Secondary Cells and batteries for renewable energy storage General requirements and methods of test part 1: Photovoltaic off-grid application
9 NAMS/IEC ed NAMS/IEC ed NAMS/IEC ed NAMS/IEC ed NAMS/IEC TS ed NAMS/IEC ed NAMS/IEC ed Wind Turbines Part 22: Conformity testing and certification Wind Turbines Part 2: small wind turbines Electrical Installations of ships and mobile and fixed offshore units UV test for modules modules Design type approval Part 2: Test procedures modules Part 1-4: Special testing thin film Cu (ln, Ga) (S, Se)2 based photovoltaic (PV) modules modules Design type approval
10 NAMS/IEC ed NAMS/IEC ed NAMS/IEC ed Part1-3: Special testing thin film amorphous silicon based photovoltaic (PV) modules modules Design type approval Part1-3: Special testing thin film cadmium telluride (CdTe) based modules modules Design type approval Part1-3: Special testing of chrystalline silicon based photovoltaic (PV) modules modules Design type approval Part 1: Test Requirements
11 NAMS/IEC 1116 ed NAMS/IEC ed NAMS/SANS 1795:2018 NAMS/SANS 10378:2018 NAMS/ISO :2018 Electromechanical equipment guide for small hydroelectric installations Procedures for temperature and irradiance corrections to measured I-V characteristics Road Traffic Law Enforcement (Part 0, 1, 2, 3, 4, 5 and 6) the competence of verification laboratories Quantities and Units Part 1: General Metrology TC 9 Published February 2018 Metrology TC 9 Published February 2018 Metrology TC 9 Published February
International Electrotechnical Commission (IEC) Technical Committee 82 reported by the Secretary
International Electrotechnical Commission (IEC) Technical Committee 82 reported by the Secretary Presented at the National and International Standards Coordination Panel Meeting Golden, Colorado June 3,
More informationSKN_N0106AnnexJ_R2. Annex J - Specific requirements for PVT collector Certification. 1. Introduction and definition
Annex J - Specific requirements for PVT collector Certification 1. Introduction and definition PVT collectors (named hybrid collectors in ISO 9806) generate heat and electric power at the same time. They
More informationAS/NZS :2016. Grid connection of energy systems via inverters AS/NZS :2016. Part 1: Installation requirements
AS/NZS 4777.1:2016 Australian/New Zealand Standard Grid connection of energy systems via inverters Part 1: Installation requirements AS/NZS 4777.1:2016 AS/NZS 4777.1:2016 This joint Australian/New Zealand
More informationIEEE* American National Standards
IEEE* American National Standards T. Basso, NREL** and IEEE SCC21 Secretary; M. Coddington, NREL; P. McNutt, NREL; and R. DeBlasio, NREL and IEEE SCC 21 Chair and IEEE Smart Grid POC Solar America Board
More informationIEEE SCC21 Overview/Status IEEE Standards Coordinating Committee 21 on Fuel cells, Photovoltaics. Dispersed Generation, and Energy Storage
IEEE SCC21 Overview/Status IEEE Standards Coordinating Committee 21 on Fuel cells, Photovoltaics. Dispersed Generation, and Energy Storage Richard DeBlasio SCC21 Chair/IEEE Standards Board Member/U.S.
More informationCapture The Power of Photovoltaics. IEEE Power Engineering Society Meeting May 2005
Capture The Power of Photovoltaics IEEE Power Engineering Society Meeting May 2005 Agenda Photovoltaic Basics Applications Economics Grid Interconnection and Net Metering Grid-Tied System Components Net
More informationHydrogen & Fuel Cell Standards Update. Julie Weis, Sara Marxen, and Julie Cairns August 2014
1 Hydrogen & Fuel Cell Standards Update Julie Weis, Sara Marxen, and Julie Cairns August 2014 Hydrogen standards update Designation Title Status Anticipated Publication Date* CSA HGV 4.1 Hydrogen Dispenser
More informationESCI 61- PV Cells Modules and Arrays April 21- Week 3 Agenda
April 21, 2010 1 ESCI 61- PV Cells Modules and Arrays April 21- Week 3 Agenda 3:30-4:00- PV Current Events / Possible Guest Speaker 4:00-4:45- Group Research What are the different types of PV solar cells?
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 8178-2 Second edition 2008-04-15 Reciprocating internal combustion engines Exhaust emission measurement Part 2: Measurement of gaseous and particulate exhaust emissions under
More informationSTATE IMPLEMENTATION PLAN CREDIT FOR EMISSION REDUCTIONS GENERATED THROUGH INCENTIVE PROGRAMS (Adopted June 20, 2013)
RULE 9610 STATE IMPLEMENTATION PLAN CREDIT FOR EMISSION REDUCTIONS GENERATED THROUGH INCENTIVE PROGRAMS (Adopted June 20, 2013) 1.0 Purpose The purpose of this rule is to provide an administrative mechanism
More informationGuideline No.: E-07(201712) E-07 TRANSFORMERS. Issued date: December 26, China Classification Society
Guideline No.: E-07(201712) E-07 TRANSFORMERS Issued date: December 26, 2017 China Classification Society Foreword: This Guide is a part of CCS Rules, which contains technical requirements, inspection
More informationIEC APPROVAL TESTS
IEC61427-1 APPROVAL TESTS Edition 1.0 : 2013-04 Secondary cells and batteries for renewable energy storage General requirements and methods of test Part 1 : Photovoltaic off-grid application Flooded lead-acid
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-23643-4 SOUTH AFRICAN NATIONAL STANDARD The testing of motor vehicles for roadworthiness WARNING This standard can only be used in conjunction with the relevant national legislation (see
More informationQuality Improvement of Photovoltaic Testing Laboratories in Developing Countries
Quality Improvement of Photovoltaic Testing Laboratories in Developing Countries Gobind H. Atmaram James D. Roland Florida Solar Energy Center Cocoa, Florida, USA Copyright 2001 The International Bank
More informationLegislative Alignment with the Old Approach Directives. Page 1 of 33
Title 1. 1989/105/EEC 2001/83/EC 2004/27/EC 2001/20/EC 2004/24/EC Medicinal Products Medicinal products Act 124/11 45/09 71/07 Ministry of Health and Regulation (EC) No Ordinance on the criteria for wholesale
More informationISO INTERNATIONAL STANDARD. Gas turbines Procurement Part 3: Design requirements
INTERNATIONAL STANDARD ISO 3977-3 Second edition 2004-08-15 Gas turbines Procurement Part 3: Design requirements Turbines à gaz Spécifications pour l'acquisition Partie 3: Exigences de conception Reference
More informationUN ECE Sectoral Initiative on Equipment for Explosive Atmospheres. United States Department of Labor Mine Safety and Health Administration (MSHA)
UN ECE Sectoral Initiative on Equipment for Explosive Atmospheres 7 September 2011 United States Department of Labor Mine Safety and Health Administration (MSHA) Describe MSHA Presentation Agenda Applicable
More informationInverter Advancements in UL1741 and UL 62109
Inverter Advancements in UL1741 and UL 62109 2015 UL LLC Scott Picco Staff Engineer Distributed Energy Resources Equipment UL LLC Renewable Energy Standards for safety of Power Conversion Equipment USA
More informationTECHNICAL SPECIFICATION
IEC/TS 62257-7-3 TECHNICAL SPECIFICATION Edition 1.0 2008-04 Recommendations for small renewable energy and hybrid systems for rural electrification Part 7-3: Generator set Selection of generator sets
More informationSTANDARDS AND REGULATIONS. Bright Amisi - Ag Executive SABS Standards Division African Utility Week 16 March 2011
STANDARDS AND REGULATIONS Bright Amisi - Ag Executive SABS Standards Division African Utility Week 16 March 2011 Overview SABS Standards and regulations Programme of work SABS Agency of the dti Established
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-24538-2 SOUTH AFRICAN NATIONAL STANDARD Transport of dangerous goods Design, construction, testing, approval and maintenance of road vehicles and portable tanks WARNING: Can only be read
More informationGuideline No.: E-07(201501) E-07 TRANSFORMERS. Issued date: October 20,2015. China Classification Society
Guideline No.: E-07(201501) E-07 TRANSFORMERS Issued date: October 20,2015 China Classification Society Foreword: This Guide is a part of CCS Rules, which contains technical requirements, inspection and
More informationFSSC 22000: Based on ISO Standards
FSSC 22000: Based on ISO Standards FSSC 22000 Harmonization Days 2014 22-23 October 2014 Kevin McKinley ISO Deputy Secretary-General ISO A Global System Collection of 19 777 ISO Standards 1 103 standards
More informationGuideline No.: E-07(201610) E-07 TRANSFORMERS. Issued date: October 28,2016. China Classification Society
Guideline No.: E-07(201610) E-07 TRANSFORMERS Issued date: October 28,2016 China Classification Society Foreword: This Guide is a part of CCS Rules, which contains technical requirements, inspection and
More informationRAISING THE BAR ON SOLAR AND BATTERY PRODUCT STANDARDS
RAISING THE BAR ON SOLAR AND BATTERY PRODUCT STANDARDS Presentation to Australian Clean Energy Summit 19 July 2017 Darren Gladman AUSTRALIA IS A VERY OPEN MARKET Imported PV panels are free of all duties
More informationIntroduction to Solar Cell Materials
1 Introduction to Solar Cell Materials 22 February 2011; Ø186 P.Ravindran, FME-course on Ab initio Modelling of solar cell Materials February 2011 Introduction to Solar Cell Materials-I Photovoltaic cell:
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-23806-3 SOUTH AFRICAN NATIONAL STANDARD The handling, storage, distribution and maintenance of liquefied petroleum gas in domestic, commercial and industrial installations Part 4: The transportation
More informationIndicativul și titlul standardului doc.
N/o Data votării Comitetul Tehnic Indicativul și titlul standardului Tipul doc. Pro (P) Contra (C) Votul Abținere (A) Total voturi Votul final (P, C, A) Comentarii Da Nu 1. 2012 04 12 TC 88 IEC 61400 23
More informationLIST OF AUTOMOTIVE INDUSTRY STANDARDS. AIS No. Title Status as on 29 th February Automotive Vehicles - Rear - View Mirrors Specification
1. AIS-001 LIST OF AUTOMOTIVE INDUSTRY STANDARDS AIS Title Status as on 2. AIS-001(Part 1) (Rev. 1) :2011 3. AIS-001 (Part 2) (Rev. 1) : 2011 4. AIS-002 Automotive Vehicles - Rear - View Mirrors Specification
More informationMALAYSIA 2174 ENFORCEMENT OFFICERS IN 86 OFFICE IN MALAYSIA RATIONALE FOR LEGAL METROLGY LEGISLATION RATIONALE FOR LEGISLATION
I. GENERAL INFORMATION MALAYSIA Population Size Domestic Trade per million population (in US$) (2007) Departmental Budget per million population (in US$) (2007) Staff Strength 27.17 MILLION GROSS DOMESTIC
More informationGuideline for Using IEEE 1547 for Solar PV Interconnection Page 1
Guideline for Using IEEE 1547 for Solar PV Interconnection Page 1 A Guide for Iowa s Municipal Electric Utilities On the How the IEEE 1547 Distributed Generation Interconnection Standard Affects Solar
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 8178-4 Second edition 2007-12-15 Reciprocating internal combustion engines Exhaust emission measurement Part 4: Steady-state test cycles for different engine applications Moteurs
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 8535-1 Fifth edition 2011-12-01 Diesel engines Steel tubes for highpressure fuel injection pipes Part 1: Requirements for seamless cold-drawn single-wall tubes Moteurs diesels
More informationISO CO2 Storage ISO TC 265
ISO CO2 Storage ISO TC 265 Tim Dixon IEA Greenhouse Gas R&D Programme CTS Workshop, IEA, Paris 16 May 2017 ISO TC 265 - CCS Proposed by Canada. Technical Committee TC265 was approved by ISO members in
More information10th Eastern Partnership Transpot Panel
10th Eastern Partnership Transpot Panel 11th May 2016 Maria Teresa SANZ VILLEGAS Road Safety Unit Directorate-General for Mobility and European Commission WHITE PAPER 2011: Towards a zero-vision on road
More informationTable 3:List of Mandatory Omani Standards
2/3/1978 6/99 1/1977 - Precast concrete blocks 2/1982 - Aggregates from natural sources for concrete 3/1977 777/1997 Cement flooring tiles and wood base materials 4/1978 - Building sands from natural sources.
More informationNew Safety Rules for Large Scale Photovoltaic Systems, Energy Storage Systems, and Microgrids
October 10, 2016 New Safety Rules for Large Scale Photovoltaic Systems, Energy Storage Systems, and Microgrids New Safety Rules for Large Scale Photovoltaic Systems, Energy Storage Systems, and Microgrids
More informationDefinitions. Scope. Customer Generation Interconnection Requirements
Updated 02/1 Page 1 Scope The purpose of this document is to describe Idaho Power s requirements for the installation and testing of Customer Generation acilities that are interconnected with Idaho Power
More informationRENEWABLE ENERGY TECHNOLOGIES INCOME TAX CREDIT UPDATE. Section , Hawaii Revised Statutes Maui Solar Summit 2013
1 RENEWABLE ENERGY TECHNOLOGIES INCOME TAX CREDIT UPDATE Section 235-12.5, Hawaii Revised Statutes Maui Solar Summit 2013 2013 LEGISLATIVE SESSION Many renewable energy bills were introduced. S.B. 1198
More informationJCM Project Design Document Form
JCM Project Design Document Form A. Project description A.1. Title of the JCM project Renewable Power for Huraa and Kuda Huraa A.2. General description of project and applied technologies and/or measures
More informationCommunity Specifications - an EASA Perspective. Bryan Jolly ATM Rulemaking Officer 17 March 2011
Community Specifications - an EASA Perspective Bryan Jolly ATM Rulemaking Officer 17 March 2011 Community Specifications an EASA Perspective EASA Role CS s Community Specification (CS) Certification Specification
More informationTECHNICAL SPECIFICATION
TECHNICAL SPECIFICATION IEC TS 62257-9-2 First edition 2006-10 Recommendations for small renewable energy and hybrid systems for rural electrification Part 9-2: Microgrids IEC 2006 Copyright - all rights
More informationTANZANIA BUREAU OF STANDARDS
EDC 5 (5235) P3 Mini-Grid Systems DRAFT TANZANIA STANDARD (Draft for comments only) Part 2: Application of Inverters TANZANIA BUREAU OF STANDARDS TBS 2017 First Edition 2017 T able of content 1 2 3 4 5
More informationINTERCONNECTION STANDARDS FOR CUSTOMER-OWNED GENERATING FACILITIES 25 kw OR LESS PUBLIC UTILITY DISTRICT NO. 1 OF CHELAN COUNTY
INTERCONNECTION STANDARDS FOR CUSTOMER-OWNED GENERATING FACILITIES 25 kw OR LESS PUBLIC UTILITY DISTRICT NO. 1 OF CHELAN COUNTY Table of Contents Chapter 1. Purpose and scope. Pg 3 Chapter 2. Application
More informationLEGAL REQUIREMENTS FOR TRANSPORT AND DISPOSAL OF HAZARDOUS WASTE IN THE ERA OF WASTE CLASSIFICATION
LEGAL REQUIREMENTS FOR TRANSPORT AND DISPOSAL OF HAZARDOUS WASTE IN THE ERA OF WASTE CLASSIFICATION How to Legally Transport and Handle Hazardous Waste How to Legally Transport and Handle Hazardous Waste
More informationSolar PV General Introduction Guide for Electricians
Solar PV General Introduction Guide for Electricians Important Note: This guide was written to provide a broad guidance for electricians that would like to expand their product knowledge and skills for
More informationConsumer, Environmental and Health Technologies Biotechnology and Food Supply Chain. GUIDANCE DOCUMENT No. 1
Ref. Ares(2016)5774004-05/10/2016 EUROPEAN COMMISSION Directorate-General for Internal Market, Industry, Entrepreneurship and SMEs Consumer, Environmental and Health Technologies Biotechnology and Food
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 61427 Second edition 2005-05 Secondary cells and batteries for photovoltaic energy systems (PVES) General requirements and methods of test This English-language version is derived
More informationP.S.C.U. No. 50 Original Sheet No ROCKY MOUNTAIN POWER ELECTRIC SERVICE SCHEDULE NO. 136 STATE OF UTAH
P.S.C.U. No. 50 Original Sheet No. 136.1 ROCKY MOUNTAIN POWER ELECTRIC SERVICE SCHEDULE NO. 136 STATE OF UTAH Transition Program for Customer Generators AVAILABILITY: At any point on the Company's interconnected
More informationELECTRICAL DISTRICT # 2
ELECTRICAL DISTRICT # 2 SOLAR ELECTRICAL APPLICATION AND AGREEMENT INSTRUCTIONS This is the application for residential or commercial solar installations. Complete the form and include a quote and full
More informationGuideline No.: E-04(201510) E-04 GENERATORS. Issued date: October 20,2015. China Classification Society
Guideline No.: E-04(201510) E-04 GENERATORS Issued date: October 20,2015 China Classification Society Foreword: This Guideline is a part of CCS Rules, which contains technical requirements, inspection
More informationEconomic and Social Council
United Nations Economic and Social Council ECE/TRANS/WP.15/2013/16 Distr.: General 16 August 2013 Original: English Economic Commission for Europe Inland Transport Committee Working Party on the Transport
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-19459-8 SOUTH AFRICAN NATIONAL STANDARD Verification standards for the verification of volume-measuring instruments, including commercial standards of volume Published by Standards South
More informationCPV Industry Overview
CPV Industry Overview Presented by Nancy Hartsoch Chairman, CPV Consortium VP Marketing and Sales, SolFocus Discussion Topics Technology Snapshot CPV Value Proposition Challenges for CPV in Going to Scale
More informationCalifornia Department of Food and Agriculture Division of Measurement Standards Petroleum Products Program Fuels and Lubricants Laboratory
California Department of Food and Agriculture Division of Measurement Petroleum Products Program Fuels and Lubricants Laboratory Development of Fuel Quality Specification for Ammonia NH3 Fuel Association
More informationUK Weighing Federation Technical Articles
GLOSSARY The source of each definition is identified by the superscript number and listed out in full at the end of this glossary. Accuracy classification (1) classification as a Class I, Class II, Class
More informationDNVGL-CP-0110 Edition March 2016
CLASS PROGRAMME Type approval DNVGL-CP-0110 Edition March 2016 The electronic pdf version of this document, available free of charge from http://www.dnvgl.com, is the officially binding version. FOREWORD
More informationAustralian Standard. Wind turbines. Part 2: Design requirements for small wind turbines. AS IEC IEC , Ed.2.
AS IEC 61400.2 2013 IEC 61400-2, Ed.2.0 (2006) AS IEC 61400.2 2013 Australian Standard Wind turbines Part 2: Design requirements for small wind turbines This Australian Standard was prepared by Committee
More informationConsultation on the Maximum Weight limit of Agricultural Trailers and Combinations on Public Roads
Consultation on the Maximum Weight limit of Agricultural Trailers and Combinations on Public Roads IOSH response to the Department for Transport consultation Submission 27.01.14 Introduction IOSH welcomes
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IS0 7483 First edition 1991-10-01 --- ---- -.----.----_-- -_ ----- - - Dimensions of gaskets for use with flanges to IS0 7005 Dimensions des joints B utiliser avec les brides de
More informationNZQA unit standard version 4 Page 1 of 5
Page 1 of 5 Title Repair and refit heavy vehicle tyres Level 3 Credits 10 Purpose This unit standard is for people in the automotive repair industry. People credited with this unit standard are able to
More informationDRAFT April 9, STATE IMPLEMENTATION PLAN CREDIT FOR EMISSION REDUCTIONS GENERATED THROUGH INCENTIVE PROGRAMS (Adopted [adoption date])
RULE 9610 STATE IMPLEMENTATION PLAN CREDIT FOR EMISSION REDUCTIONS GENERATED THROUGH INCENTIVE PROGRAMS (Adopted [adoption date]) 1.0 Purpose The purpose of this rule is to provide an administrative mechanism
More informationUSER INFORMATION, CURRENT RULE CHAPTERS AND INDEX
RULES FOR CLASSIFICATION OF Ships MAIN CHANGES JANUARY 2013 General A complete list of current rule chapters including revision dates is presented in Pt.0 Ch.1 Sec.2. The listing below contains only chapters
More informationSAN JOAQUIN VALLEY UNIFIED AIR POLLUTION CONTROL DISTRICT DRAFT STAFF REPORT
DRAFT STAFF REPORT Draft Amendments to Rule 4621 (Gasoline Transfer into Stationary Storage Containers, Delivery Vessels, and Bulk Plants) and Rule 4622 (Gasoline Transfer into Motor Vehicle Fuel Tanks)
More informationOff-grid solar photovoltaic lighting kits Requirements
EEDC 5 (5039) P3 DRAFT TANZANIA STANDARD (Draft for Stakeholders comments only) Off-grid solar photovoltaic lighting kits Requirements TANZANIA BUREAU OF STANDARDS TBS 2016 First Edition 2016 Foreword
More informationFINANCIAL SERVICES COMMISSION OF ONTARIO. Filing Guidelines for Automobile Rate Manuals
FINANCIAL SERVICES COMMISSION OF ONTARIO Filing Guidelines for Automobile s Filing Requirements Insurers are required to submit a rate manual filing following: 1. approval of changes to rating rules changes,
More informationCaution and Disclaimer The contents of these materials are for information purposes and are provided as is without representation or warranty of any
Draft Version 1 Caution and Disclaimer The contents of these materials are for information purposes and are provided as is without representation or warranty of any kind, including without limitation,
More informationIDCOL Technical Standard for Solar Irrigation Pump (SIP) Under TR/KABITA Program
IDCOL Technical Standard for Solar Irrigation Pump (SIP) Under TR/KABITA Program Details of approved packages Program Daily water output (Lt/day) Maximum TDH (m) 100,000 15 50,000 30 TR/KABITA 200,000
More information(Text with EEA relevance)
28.4.2011 Official Journal of the European Union L 108/13 COMMISSION REGULATION (EU) No 407/2011 of 27 April 2011 amending (EC) No 661/2009 of the European Parliament and of the Council as regards the
More information9 EGR action plan for ESTP Training on EGR 5-6 September 2017
9 EGR action plan for 2017-2018 ESTP Training on EGR 5-6 September 2017 ESBRs Business Architecture road map 2017-2020 The ESBRs Business Architecture Task Force specified a road map for the ESBRs developments
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 1179-3 First edition 2007-08-15 Connections for general use and fluid power Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing Part 3: Light-duty
More informationOfficial Journal of the European Communities
1.11.2000 EN Official Journal of the European Communities L 279/33 DIRECTIVE 2000/55/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 18 September 2000 on energy efficiency requirements for ballasts
More informationCOUNCIL OF THE EUROPEAN UNION. Brussels, 11 December /3/06 REV 3 ADD 1. Interinstitutional File: 2003/ 0153(COD) ENT 84 CODEC 561
COUNCIL OF THE EUROPEAN UNION Brussels, 11 December 2006 Interinstitutional File: 2003/ 0153(COD) 9911/3/06 REV 3 ADD 1 T 84 CODEC 561 STATEMT OF THE COUNCIL'S REASONS Subject : Common Position adopted
More informationECE/RCTE/CONF/4/Add.1/Rev.2
ECE/RCTE/CONF/4/Add.1/Rev.2 8 May 2018 Agreement Concerning the adoption of uniform conditions for periodical technical inspections of wheeled vehicles and the reciprocal recognition of such inspections
More information3. Customer shall provide space for metering equipment and meter base as per Springville City Power requirements.
A. General This Customer-Owned Generation Standards for Customer-Owned Grid Connected Electric Generating Systems sets forth the requirements and conditions for interconnected non-utility-owned electric
More informationRSWGM meeting European Commission DG MOVE 3-4 April 2017
Podgorica RSWGM meeting European Commission DG MOVE 3-4 April 2017 Mobility and Transport 1 WHITE PAPER 2011: Towards a zero-vision on road safety POLICY ORIENTATIONS ON ROAD SAFETY 2011-2020 The -50%
More informationLIST OF AUTOMOTIVE INDUSTRY STANDARDS. AIS No. Title Status as on 16 th December Automotive Vehicles - Rear - View Mirrors Specification
1. AIS-001 LIST OF AUTOMOTIVE INDUSTRY STANDARDS AIS Title Status as on Amd. 2 2. AIS-001(Part 1) (Rev. 1) :2011 3. AIS-001 (Part 2) (Rev. 1) : 2011 Automotive Vehicles - Rear - View Mirrors Specification
More informationImpact of Electricity
SOLAR ENERGY TECHNOLOGY What will be discussed: Solar Photovoltaic Systems Gerrit Jacobs 14-18 June 2010 Jakarta Indonesia Training Course on Renewable Energy Part II - MEMR CASINDO 1 s Units of measurement
More informationISO INTERNATIONAL STANDARD. Road vehicles Road load Part 2: Reproduction on chassis dynamometer
INTERNATIONAL STANDARD ISO 10521-2 First edition 2006-10-01 Road vehicles Road load Part 2: Reproduction on chassis dynamometer Véhicules routiers Résistance sur route Partie 2: Reproduction sur banc dynamométrique
More informationAustralian/New Zealand Standard
AS/NZS 3696.19:2009 AS/NZS 3696.19:2009 Australian/New Zealand Standard Wheelchairs Part 19: Wheeled mobility devices for use as seats in motor vehicles (ISO 7176-19:2008, MOD) AS/NZS 3696.19:2009 This
More informationElectric vehicle charging system
TECHNICAL REFERENCE (ICS 43.120) TECHNICAL REFERENCE FOR Electric vehicle charging system Published by SPRING Singapore 2 Bukit Merah Central Singapore 159835 SPRING Singapore Website: www.spring.gov.sg
More informationAgency Information Collection Activity Under OMB Review. AGENCY: National Highway Traffic Safety Administration (NHTSA),
This document is scheduled to be published in the Federal Register on 08/20/2018 and available online at https://federalregister.gov/d/2018-17939, and on govinfo.gov DEPARTMENT OF TRANSPORTATION National
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-32599-2 SOUTH AFRICAN NATIONAL STANDARD Electrical security installations Part 3: Electric fences (non-lethal) and manufacture requirements WARNING This document references other documents
More informationSubmitted by the Medical Device Battery Transport Council (MDBTC) *
United Nations Secretariat ST/SG/AC.10/C.3/2017/27 Distr.: General 11 April 2017 Original: English Committee of Experts on the Transport of Dangerous Goods and on the Globally Harmonized System of Classification
More informationGREENER SHIPPING SUMMIT 2017
GREENER SHIPPING SUMMIT 2017 EU MRV Regulation Methods of Data Collection of Fuel Differences/Consequences/Evaluation of Methods Antonios Georgantzis 14 November 2017 Eugenides Foundation The EU MRV Timeline
More informationISO/TC 131/SC
DRAFT INTERNATIONAL STANDARD ISO/DIS 6149-1 ISO/TC 131/SC 4 Connections for hydraulic fluid power and general use Ports and stud ends with ISO 261 metric threads and O-ring sealing Part 1: Ports with truncated
More informationElectric Power Train Vehicles Measurement of Net Power and The Maximum 30 Minute Power
FINALISED DRAFT AUTOMOTIVE INDUSTRY STANDARDS Electric Power Train Vehicles Measurement of Net Power and The Maximum 30 Minute Power (Revision 1) ARAI Date of hosting on website : 9 th September 2014 Last
More informationHYDROGEN REFUELLING STATIONS (HRS): RECENT AND CURRENT PERSPECTIVES
HYDROGEN REFUELLING STATIONS (HRS): RECENT AND CURRENT PERSPECTIVES HYLAW UK WORKSHOP CITY HALL 8 TH NOVEMBER 2018 NICK HART, ITM POWER PLC HRS: RECENT AND CURRENT PERSPECTIVES HYLAW UK WORKSHOP CITY HALL
More informationIDCOL Technical Standard for Solar Irrigation Pump (SIP) Under Ownership Model
IDCOL Technical Standard for Solar Irrigation Pump (SIP) Under Ownership Model Configuration of approved packages: Program Daily water output (Lt/day) 100,000 Maximum TDH (m) Minimum PV capacity (kwp)
More informationLevel 5. Credits 85. Purpose. Special Notes
NZQF NQ Ref 0793 Version 4 Page 1 of 11 National Certificate in Driving (Education and Assessment) with optional strands in Light Motor Vehicle, Heavy Motor Vehicle, Motorcycle, and Off-road Vehicle Level
More informationANNUAL REPORT 2017 NSAI FOOD INDUSTRY STANDARDS COMMITTEE. F-ST-25 Rev 0. Pgs 1-5
ANNUAL REPORT 2017 F-ST-25 Rev 0 Pgs 1-5 NSAI FOOD INDUSTRY STANDARDS COMMITTEE Contents 1 Chairman's Statement... 3 2 Introduction... 3 3 Scope of TC... 3 Structure and Membership... 3 3.1 Members...
More informationÌ229556GÎ CHAMBER ACTION Senate. House...
CHAMBER ACTION Senate. House Comm: WD 3/13/2008.... 1 2 3 4 5 6 7 8 9 10 11 12 13 14 The Committee on Environmental Preservation and Conservation (Rich) recommended the following amendment to amendment
More informationNovember 2016 SOLIBRO GMBH COMPANY PRESENTATION RENEWABLE ENERGY DELEGATION FROM GERMANY. M.Sc.-Ing. Mostafa Kamal
November 2016 SOLIBRO GMBH COMPANY PRESENTATION RENEWABLE ENERGY DELEGATION FROM GERMANY M.Sc.-Ing. Mostafa Kamal CONTENT COMPANY FACTS PRODUCTS & QUALITY TECHNICAL FACTS APPLICATIONS REFERENCES SERVICE
More informationRegulatory and Permitting Requirements of Stationary Generators In Delaware
Regulatory and Permitting Requirements of Stationary Generators In Delaware Delaware - DNREC Air Quality Management February 7, 2006 Mark A. Prettyman and Guadalupe J. Reynolds Outline Regulation No. 1144
More informationTECHNICAL SPECIFICATION
TECHNICAL SPECIFICATION IEC TS 62257-2 First edition 2004-05 Recommendations for small renewable energy and hybrid systems for rural electrification Part 2: From requirements to a range of electrification
More informationGuideline No.: E-04(201610) E-04 GENERATORS. Issued date: October 28,2016. China Classification Society
Guideline No.: E-04(201610) E-04 GENERATORS Issued date: October 28,2016 China Classification Society Foreword: This Guideline is a part of CCS Rules, which contains technical requirements, inspection
More information1.Power System Infrastructure
1.Power System Infrastructure Central Generating Station Step-Up Transformer 2. Communications and Information Infrastructure Operators, Planners & Engineers Control Center Distribution Substation Gas
More informationISO :2015/DAM 1
DRAFT AMENDMENT ISO 19973-2:2015/DAM 1 ISO/TC 131 Voting begins on: 2018-01-15 Secretariat: ANSI Voting terminates on: 2018-04-09 Pneumatic fluid power Assessment of component reliability by testing Part
More informationPattern evaluation programs for traffic speed measurement devices in PR China
Pattern evaluation programs for traffic speed measurement devices in PR China Q. SUN, NIM China OIML TC7/SC4/p3 Workshop 16 to 18 July 2013, Gaithersburg Content Legal basis for traffic speed measuring
More informationPRESENTATION ON HYBRID SOLAR SYSTEM BASED ON SUN SINE SMART MICRO INVERTERS
WELCOME PRESENTATION ON HYBRID SOLAR SYSTEM BASED ON SUN SINE SMART MICRO INVERTERS SUN AS AN IMPORTANT SOURCE OF ENERGY The demand for the renewable energy sources have been increasing recently due to
More information