FACULTY PROFILE. Date of Birth : No 9-A Block, Tamil Nadu Housing Board, Maharajapuram, Villupuram Educational Qualification:

Transcription

1 Phone No : FACULTY PROFILE Dr.V.Gnanamoorthi Assistant Pressor & HOD i/c Mechanical College engineering Kakuppam ID : cvgnana@gmail.com cvgnana@aucev.edu.in Date Birth : Contact Address: No 9-A Block, Tamil Nadu Housing Board, Educational Qualification: Maharajapuram, Ph.D., (I.C Engine) (), Madras Institute Technology,,. M.E (Automobile ) (2006), Madras Institute Technology,,. B.E (Mechanical ) (2000), Sri Muthukumaran Institute Technology,, Madras,. D.M.E (Mechanical ) (Hons.) (1997),Meenakshi Ammal Polytechnic college, Uttiramerur. Teaching Experience : (13 years 06 months) Assistant Pressor / Mechanical: College (, ). (11 th August Till date) Visiting Faculty/ Automobile,Madras Institute Technology,,.(28 th January 2008 to 8 th August 2008 ) Senior Lecturer / Mechanical: Meenakshi College,. (1 st July th January 2008) Area Interests: I.C Engine Combustion

2 Alternative fuels Thermal barrier coating Title thesis at Doctoral level: Experimental investigation on the performance and emission characteristics a DI diesel engine using different proportions ethanol in ethanol diesel blend. Title thesis at Master s level: Effect oxygenated compounds on performance characteristics and emission levels direct injection diesel engine. Membership in Pressional bodies Combustion Institute(India) SAE India Academic Contributions International Conference organized :01 Faculty development Courses organized : 02 M.E. Projects guided : 12 B.E. Projects guided : 25 Publications International Journals: 6 National Journals : 3 Published in International Journals: Gnanamoorthi.V&Devaradjane.G (2015) Effect combustion chamber geometry on performance and emission DI diesel engine with ethanol-diesel blend, Journal Mechanical Science and Technology, Published by Springer ISSN: X Date acceptance: 30 March Gnanamoorthi.V & Devaradjane.G (2015), Effect Compression Ratio on the Performance, Combustion and Emission DI Diesel Engine Fuelled with Ethanol Diesel Blend, Journal the Energy Institute, Published by ELSEVIER Publications vol. 88 (2015) no. 1, pp , Year:, ISSN: V.Gnanamoorthi & G.Devaradjane, (2015) Multi-Zone Modeling Effect on Combustion on DICI Engine using Ethanol Diesel Blend, Applied Mathematical Sciences, Vol.9,2015 No.68, Published by Hikari Ltd. A.Gurusamy & V.Gnanamoorthi,(2015) Effects Ethanol Carburetion on the Performance and Emission Characteristics in DI-diesel Engine, Journal Chemical and Pharmaceutical Sciences,. Special Issue 5:2015, Page ISSN: N.Radhakrishnan&V.Gnanamoorthi, (2015) Pyrolysis Groundnut Shell Biomass to Produce Bio-Oil, Journal Chemical and Pharmaceutical Sciences,. Special Issue 9: April 2015, Page ISSN:

3 Gnanamoorthi.V & Devaradjane.G(2015), The effect Thermal Barrier Coating material in CI engine using higher fraction ethanol diesel Journal Chemical and Pharmaceutical Research, 7(2) pp: ISSN: Gnanamoorthi.V, Ragothaman.G & Devaradjane.G (), Selective Fast Pyrolysis Biomass to produce Bio-Oil International Journal Applied Environmental Sciences Published by Research India publications, vol. 9, no. 5, pp , ISSN: Gnanamoorthi.V, Udhayakumar.K & Devaradjane.G(), Experimental Investigation Diesel Ethanol Blend in DI Diesel Engine Using Preheating Intake Air, Advanced materials Research Published by: Trans Tech publications, vol , July, ISSN: Gnanamoorthi.V & Devaradjane.G (), Effect Semi Thermal Barrier Coatings on Piston Crown in Internal Combustion Engine Using Ethanol Diesel Blend, International Journal Applied Environmental Sciences Published by Research India publications, vol. 9, no. 3, pp , ISSN: Gnanamoorthi.V& Devaradjane.G(2013), Effect Ethanol- Diesel Blend on Performance, Combustion and Exhaust Emission a Diesel Engine,International Journal Current engineering and Technology -Published by : Inpressco, vol. 3, no. 1,March, ISSN: Published in International Conference proceedings as papers: V.Gnanamoorthi, K.Udhayakumar & G.Devaradnaje 2015, Effect Diesel Ethanol Operating on Dual Fuel Mode in Diesel Engine, International Conference on Advances in Mechanical, Organized by College at 15 & 16 th October G.Rogothaman & V.Gnanamoorthi, 2015, Performance and Emission Characteristics Pyrolysis Oil Blend with Diesel in IC Engine, International Conference on Advances in Mechanical, Organized by College at 15 & 16 th October A.Gurusamy, V.Gnanamoorthi & P.Purushothaman, 2015 An Influence Ignition Enhancer Additive on Performance and Emission characteristics Ethanol Carburetion in Di-Diesel Engine, International Conference on Advances in Mechanical, Organized by College at 15 & 16 th October S.Suresh Sagadevan, V.Gnanamoorthi & S.Rajesh 2015, Analysis Synthesis and Characterization Copper Oxide Nanluids, International Conference on Advances in Mechanical, Organized by College at 15 & 16 th October M.Venkatraman, G.Devaradjane & V.Gnanamoorthi 2015, Performance and Emission Study on DICI and HCCI Engine using Raw Pongamia Oil and Diesel, International Conference on Advances in Mechanical, Organized by College at 15 & 16 th October K.Sridharan, R.Sivaramakrishnan & V.Gnanamoorthi 2015, Experimental Investigation on the Deformation Characteristics NR/BR Blend Rubber Blocks under Large Compression Strain, International Conference on Advances in Mechanical,

4 Organized by College at 15 & 16 th October S.Rajesh, G.B.Bhaskar, R.Franklin Issac & V.Gnanamoorthi 2015, Assessment Performance on Composite Leaf Springs Subjected to Low Velocity Impact Loading, International Conference on Advances in Mechanical, Organized by College at 15 & 16 th October V.Vivek, P.Sakthivel, K.Kavin, K.udhayakumar & V.Gnanamoorthi 2015, Effect Semi Thermal Barrier Coating (Ceo2/Tio2) on Diesel Engine using Ethanol Diesel Blend Assisted with Glow Plug, International Conference on Advances in Mechanical, Organized by College at 15 & 16 th October Gnanamoorthi. V& Devaradjane.G (), Multi-zone modeling effects on combustion on DICI engine using ethanol diesel blend, International conference on mathematics and its applications. Organized by College, at December Gnanamoorthi.V, Udhayakumar.K & Devaradjane.G, Experimental Investigation Diesel- Ethanol Operating on Diesel Engine In Dual Fuel Mode, International Conference Green Technology for Environmental Pollution Prevention and Control organized by NIT, Trichy at September. Gnanamoorthi.V & Devaradjane.G, Aluminum oxide-molybdenum - Titanium Oxide as Thermal Barrier Coating Material in CI Engine using Ethanol Diesel Blend, International Colloquium on Materials, Manufacturing and Metrology Organized by: Indian Institute Technology Madras, India, August 8-9. Gnanamoorthi.V, Udhayakumar.K & Devaradjane.G, Experimental Investigation Diesel- Ethanol Blend in DI diesel engine using preheating intake air, International Conference on Recent Advances in Mechanical and Interdisciplinary Developments. Organized by Ponjesly College, at 7-8 March. Gnanamoorthi.V, Dhileepan.S & Devaradjane.G 2013, Effect Thermal Barrier Coating on Piston Crown in Diesel Engine, International conference on Nano materials science, Technology and Applications (ICNM 13) Organized by B.S.Abdur Rahman university, India, December 5-7. Gnanamoorthi.V & Devaradjane.G 2007, Effects Oxygenated compounds on Performance characteristics and Emission levels Direct Injection Diesel Engine, International Conference on I.C Engines and Combustion. Organized by JNTU, Hyderabad at 6-9 December Published in National Conference proceedings as papers: Gnanamoorthi.V & Gurusamy.A(2015), Effects ethanol carburetion on the performance and emission characteristics in DI diesel engine, National conference on recent trends and developments in sustainable green technologies. Organized by MIT, at March Gurusamy.A & Gnanamoorthi.V (), Effects premixed ethanol on the combustion, performance and emission characteristics in diesel engines-a Review. Organized by Vinayaka Mission, at 25-26September.

5 Research Publications (Books) Chapters contributed to edited knowledge based volumes published by Indian / National level publisher, with ISBN /ISSN number: Sl. No Book Name Title / Volume Pages ISBN Numbers Editors Name 1 International Thermal Dr.V.Gnanamoorthi, Conference on Advances in Mechanical Science /Volume-I 4 2 International Conference on Advances in Mechanical Manufacturing /Volume-II Dr.V.Gnanamoorthi, 3 International Conference on Advances in Mechanical Design,Robotics & Application /Volume-I Dr.V.Gnanamoorthi, Attended Refresher Courses, Methodology Workshops, Training, Teaching Learning - Evaluation Technology Programmes, St Skills Development Programmes, Faculty Development Programmes: Sl. No. Name Programme Organizers Place Date & Year NO.Days 1 One day workshop on Domestic and Industrial safety 2 National Workshop on Materials for Automotive Industries Mechanical, College Sri Manakula Vinayagar College College Sri Manakula Vinayagar College 25th September th September day 1 day

6 3 Awareness programme on Intellectual Property Rights 4 National Workshop on XML and Web services 5 Short Term course under Quality improvement programme, Advances in Computational Heat Transfer 6 Short Term course under Quality improvement programme, Bio gas production, purification and power generation 7 Two days National Seminar on Recent Trends and Development in Automobile Centre for Intellectual Property Rights,, Computer Science &, College Mechanical, Indian Institute Technology Delhi Centre for rural development and technology, Indian Institute Technology Delhi Automobile College College, Indian Institute Technology Delhi IIT Delhi MIT Campus, 4th September th August st May 2015 to 23rd May th May 2015 to 20th May th February 2015 to 14th February day 1 day 3 days 3 days 2 days 8 ProE-CAD and Ansys Training,, 13/03/ to 15/03/ & 20/03/ to 22/03/ 6 days

7 9 FDP MA2211 Transforms and Partial Differential Equations 10 Faculty Development Programme AT2302- Automotive Electrical & Electronics 11 Research Methodology, Techniques writing Research Articles for SCT Journals and Ph.D thesis preparation 12 FDP ME2041 Advanced IC Engines 13 Computational Fluid Dynamics 14 Recent Advances in Internal Combustion Engines 15 How to prepare Research Project Proposal Mathematics College, Automobile, MIT Campus, Automobile MIT,, I.C Engine Division, CEG,, Mechanical, National Institute Technology, Trichy I.C.Engine Division,CE G,, College, College, MIT Campus, MIT,, I.C Engine Division, CEG,, National Institute Technology, Trichy CEG,, College, June th to 16th June 2013 One week 7 days March One day December June November 2011 One week Two weeks Two days 06/08/2011 One day

8 16 FDP ME2204 Fluid Mechanics Machinery 17 Recent Trends and Developments in Engine Management Systems and Alternative Fuels 18 Convention on Safety in Mobility for NCC / YRC Programme Officers and Student Volunteers Automobile,MIT,, Automobile MIT,, NSS Cell, MIT,, MIT,,, 1-8 June March August 2009 One week Two days One day 19 One Day Orientation Programme for NSS Programme Officers 20 General orientation course National Service Scheme 21 Workshop on Recent trends in Automobiles and IC engines NSS Cell, Madras school Social work and National Service Scheme Mechanical,St.Josephs college,, Madras school Social work, St.Josephs college, 28/07/2009 One day to July 2003 Ten days Two days

9 International Conferences / Symposia / workshops /Faculty Development Programmes Conducted: Sl.No Name the Conferences / Seminars / Symposium / Workshop Conducted 1 FDP ME6404 Thermal 2 International Conference on Advances in Mechanical Duration December October Agnimithra th 6 th March 2015 No. Participants Venue 25 College, 500 College, 700 College, Sponsoring Agency College, College, College, 4 One Day National Workshop on Recent Trends in I.C Engine 10 October 300 College, College, 5 FDP - ME 6301 Thermodynamics June 6 Agnimithra February 7 FDP - GE Mechanics December Agnimithra 1-2 March 30 College, 800 College, 30 College, 750 College,, College,, College,

10 III (E) (ii) Papers In Conferences / Seminars / Workshops etc: Participation and presentation research papers in international and National conference: Name the Sl.No International & National Conference 1 International Conference on Advances in Mechanical 2 International Conference on Advances in Mechanical 3 International Conference on Recent Advancement in Mechanical and Technology 4 National conference on recent trends and developments in sustainable green technologies. Organized by MIT, 5 International conference on mathematics and its applications 6 National Conference on RecentInnovations and Advanced Trends in Mechanical RIATME- 7 International Colloquium on Materials, Manufacturing and Metrology 8 International Conference on Recent Advances in Mechanical and Interdisciplinary Developments Title the Paper Date and year Organized by Effect Diesel Ethanol Operating on Dual Fuel Mode in Diesel Engine Performance and Emission Characteristics Pyrolysis Oil Blend with Diesel in IC Engine Pyrolysis groundnut Shell bios mass to produce bio-oil Effects ethanol carburetion on the performance and emission characteristics in DI diesel engine Multi-zone modeling effects on combustion on DICI engine using ethanol diesel blend Effects premixed ethanol on the combustion, performance and emission characteristics in diesel engines-a Review Aluminum oxide-molybdenum Titanium Oxide as Thermal Barrier Coating Material in CI Engine using Ethanol Diesel Blend Experimental Investigation Diesel- Ethanol Blend in DI diesel engine using preheating intake air 15 th & 16 th October th & 16 th October rd & 24 th April th and 25 th March th -17 th December- 25 th and 26 th September 8 th & 9 th August - 7 th & 8 th March College College Vinayaka Missions MIT campus,, College Vinayaka Mission, Indian Institute Technology Madras, India, Ponjesly College

11 9 International conference on Nano materials science, Technology and Applications (ICNM 13) 10 International Conference on I.C Engines and Combustion Effect Thermal Barrier Coating on Piston Crown in Diesel Engine Effects Oxygenated compounds on Performance characteristics and Emission levels Direct Injection Diesel Engine, International Conference on I.C Engines and Combustion 5 th to 7 th December th to 9 th December B.S.Abdur Rahman university, India, Jawaharlal Nehru Technological (JNTU) Hyderabad Invited lectures or presentations for Conference / Symposia: Sl. No. Name the programme Title the lecture Date and Year Institute / Organization where the lecture is delivered 1 FDTP Heat and Mass Transfer Heat and Mass Transfer 16 th June 2015 College Kancheepuram 2 FDTP GE6152- Graphics 14 th May 2015 College Graphics 3 International conference on Recent Advancement in Mechanical & Technology 4 National conference on recent trends and developments in sustainable green technologies. 5 FDP - ME 6301 Applied pneumatics and hydraulics 6 One Day National Level Workshop On Recent Advances in Automotives Recent trends in IC Engines Common rail Direct injection System (CRDI) Applied pneumatics and hydraulics Arni 23 rd April 2015 Vinayaka Missions 24 th March 2015 MIT,, 25 th June College Ariyalur, Ariyalur Alternative fuels 19 th March College Thoothukudi, Thoothukudi. 7 FDP - ME 2251 Heat and Mass transfer HEAT EXCHANGERS 18 th December 2013 College Panruti, Panruti 8 FDP - ME 6301 Thermal Advanced I.C Engines 21 st June 2013 College,

12 S.No PG Student Project Guidance: Name the Scholar Title the Thesis 1 K..ABILASH Experimental Investigation on Enhancing the Tribological Behaviour an Engine Lubricant using Nanoparticle Additive 2 N.RATHAKRISHNAN An experimental investigation on diesel engine by using groundnut shell pyrolysis oil- Diesel blends 3 L.VIJAYABASKAR Effect spark assisted diesel engine using ethanol and biodiesel blend as a fuel 4 R.L.GOPINATHAN Experimental investigation high swirl inducing combustion chamber in diesel engine for emission reduction 5 A.GURUSAMY An experimental investigation ethanol using fumigation techniques with ignition enhancer in diesel engine 6 G.RAGOTHAMAN Performance and emission characteristics pyrolysis oil blend with diesel in IC engine. 7 P.PALANIKUMAR Effect compression ratio on performance and emission characteristics camphor and pongamia oil using in diesel engine 8 K.UDHAYAKUMAR Experimental investigation DI diesel engine operated on duel fuel mode and DICI mode using ethanol as fuel 9 N.VIVEK Effect thermal barrier coating on diesel engine using ethanol diesel blend assisted with glow plug 10 S.DHILEEPAN Performance and emission characteristics thermal barrier coating on piston crown in diesel engine Month & Year Viva Voce Conducted June 2015 June 2015 June 2015 June 2015 June 2015 June June June June July R.VIJAY Experimental analysis piston bowl in CI engine July M.NAVIN MARUDHAN Improvement fuel properties and emission reduction by use oxygenated fuel blend with diesel on a heavy-duty diesel engine July 2013

13 UG Student Project Guidance: Sl. No Student s Name Project-title Year 1 Kamalakarthikayan.I,L akshmanprakash.m, Rajmohamed.M, Sabarinathan.P Portable engraving machine 2 Chitrarasu.G, Dhandapani.V, Mathivanan.A 3 Mohamed rasith.h, Mohan.G.J, Rajan.K, Regis Andrew.M 4 Anandraj.A, Subash.K, Thiruvengadam.R, Vijayashanmugam.S 5 Babu.M, Dhamodharan.D, Karthik kumar.s, Ranjith kumar.s Design and fabrication solar energy using sewing machine Analysis thermal barrier coating in IC engine Performance and emission characteristics diesel engine blend with pongamia oil associated glow plug Design and fabrication exhaust gas recirculation(egr) in diesel engine 6 Malolan sundararaman Reducing oil throw in a turbocharger by employing pressure gallery 7 Alagumuthu.M, Effect EGR in direct injection diesel Elumalai.M, engine Karunanithi.L, Meenakshi sundaram.r 3 rd April 23 rd April rd April 4 rd April 25 th April 24 th April 24 th April 8 Arunmainayagam.M, Preksha.K Performance and emission characteristics diesel engine with ethanol diesel blend in different injection pressure 24 th April 9 Kavin kumar.k, Prakalathan.T, Udhayakumar.K Performance and emission characteristics variable compression ratio direct injection diesel engine using ethanol diesel blends 10 Bharathi dhasdan.d Design and assembling solar powered sewing machine 11 Babu.M, Kaviyarasu.T Experimental analysis piston bowl for increasing compression ratio, turbulence and squish in CI engine 24 th April 27 th April th April 2013

14 Subjects Interest: Graphics. Mechanics Strength Materials Thermodynamics Heat and Mass Transfer Advanced I.C. Engine Dynamics Machinery Administrative Responsibilities: Head the Mechanical at College (8 th September th January 2013). Head the Mechanical at College (10 th February 2015 Till Date). NSS programme ficer at Meenakshi College,. (1 st July th January 2008). NSS programme ficer at College,. (20 th May 2009-January 2013). Purchase Committee Member. Entrepreneurship Coordinator Other Important Assignments Faculty In charge for Thermal lab and IC engine Lab in Mechanical at UCEV, Class Co-ordinator (2008 Admissions, 2009 Admissions and 2010 Admissions) PG Project Coordinator during the year UG Project Coordinator during the year Class committee chairman Mechanical at UCEV, Transport In charge at UCEV, Programme Officer, National Service Scheme unit, UCEV. Free laptop Monitoring Committee member. Ant ragging Monitoring committee member. Disciplinary Monitoring committee member. Ten Principles (MY) Life " Try to win the race based on your ability rather than winning the race by creating obstacles to others " " Encourage people to take up challenges rather than forcing them " " Do justice to your job and make the people to do so " " Use power for construction not for destruction "

15 " Leader should be ideal, shouldn't be idle " " All are humans and are equal " " Believe in humanity, harmony and hard work " " Live peacefully and allow others to live peacefully " " Try to help others, if unable to help, at-least don't harm " Think about you, about your family and, about your society before taking any decision."