INSTALL GUIDE OL-BLADE-AL(TB)-NI-EN

Transcription

1 Alarms & Remote Start Omega R&D Inc. INSTALL GUIDE OL-BLADE-AL(TB)-NI-EN NI Available for : OL-BLADE-AL Rev. Date: June, 04 The brand names and logos found in this guide are property of their respective owners. Omega R&D Inc. 04! NOTICE: The manufacturer will accept no responsibility for any electrical damage resulting from improper installation of this product, be that either damage to the vehicle itself or to the installed device. This device must be installed by a certified technician. This guide has been written for properly trained technicians; a certain level of skill & knowledge is therefore assumed. Please review the Installation Guide carefully before beginning any work.

2 Page of 8 install type SeLeCtiOn data IMMoBILIZer Bypass 00-0 I I QX Q Altima 0-04 Maxima Pathfinder 0-04 Sentra X-Trail - year G0 ModeL InsTaLL Type nissan InFInITI MaKe FeaTUres Omega Research & Development Inc. 04

3 Page 3 of 8 InFInITI WIre description name CoLor Type position WIre CoLor polarity ModULe LoCaTIon CoMponenT LoCaTor LtGreen/Black 0 Red/Yellow year G Data I30 I35 QX4 Altima Maxima nissan ModeL MaKe type - wire CrOSS reference CHart - OF Pathfinder Sentra Sentra Xtrail 00-0 Data 0 Orange Green/Orange Red/Yellow 0 Orange Green/Orange White/Black 0 Purple/Red Brown Red 0 Blue/Red Green/Orange Red/Yellow 0 Orange Green/Orange White/Black 0-04 Data 0-03 Data 0-04 Data Data 0-04 Data 0 Purple/Red Brown Brown 0 Gray/Red Green/White 0 Gray/Red Green 0 Orange 00-0 Data Data - Data Omega Research & Development Inc. 04

4 Page 4 of 8 type - wiring diagram REMOTE STARTER WIRE SIDE VIEW IG TI ON IT R CU NI SE TA DA G LI ) (+ Y HT *BLADE CONNECTOR EXACT PIN-OUT WHITE/RED 0 0 WHITE/BLACK WHITE 09 9 PINK/BLACK 08 8 PINK 7 BLACK BROWN/RED 06 6 BROWN/YELLOW ORANGE/BLACK 5 ORANGE/WHITE ORANGE 04 4 BLUE/RED 03 3 BLUE/YELLOW GREEN/RED 0 YELLOW GRAY/RED 0 GRAY/YELLOW WHITE/BLACK - IGNITION CONNECTOR SIDE WHITE/RED - IGNITION VEHICLE SIDE WHITE (NC) YELLOW (NC) BROWN/RED (NC) BROWN/YELLOW (NC) ORANGE/BLACK (NC) ORANGE/WHITE (NC) ORANGE (NC) PINK/BLACK (NC) PINK (NC) BLUE/RED - SECURITY LIGHT CONNECTOR SIDE BLUE/YELLOW - SECURITY LIGHT VEHICLE SIDE GREEN/RED (NC) GRAY/RED - DATA GRAY/YELLOW (NC) BLACK (NC) ONLY WHEN VEHICLE IS EQUIPED WITH THEFT SECURITY LIGHT Omega Research & Development Inc. 04

5 Page 5 of 8 CoLor Type position WIre CoLor polarity ModULe LoCaTIon CoMponenT LoCaTor 0-06 name year ModeL Q45 WIre description InFInITI MaKe type - wire CrOSS reference CHart - OF 03 White/Black Data Green/White 5 Green Keysense 0 Purple/White (+) Omega Research & Development Inc. 04

6 Page 6 of 8 type - wiring diagram NATS MODULE LOCATED NEAR OBDII CONNECTOR REMOTE STARTER TY RI CU SE T GH LI ) (+ ON TI NI IG TA SE DA EN YS KE *BLADE CONNECTOR EXACT PIN-OUT WHITE/RED 0 0 WHITE/BLACK WHITE 09 9 PINK/BLACK 08 8 PINK 7 BLACK BROWN/RED 06 6 BROWN/YELLOW ORANGE/BLACK 5 ORANGE/WHITE ORANGE 04 4 BLUE/RED 03 3 BLUE/YELLOW GREEN/RED 0 YELLOW GRAY/RED 0 GRAY/YELLOW WHITE/BLACK - IGNITION VEHICLE SIDE WHITE/RED - IGNITION CONNECTOR SIDE WHITE - KEYSENSE YELLOW (NC) BROWN/RED (NC) BROWN/YELLOW (NC) ORANGE/BLACK (NC) ORANGE/WHITE (NC) ORANGE (NC) PINK/BLACK (NC) PINK (NC) BLUE/RED - SECURITY LIGHT CONNECTOR SIDE BLUE/YELLOW - SECURITY LIGHT VEHICLE SIDE GREEN/RED (NC) GRAY/RED - DATA GRAY/YELLOW (NC) BLACK (NC) Omega Research & Development Inc. 04

7 Page 7 of 8 Cartridge installation Slide cartridge into unit. Notice button under LED. Ready for Module Programming Procedure. module PrOgramming PrOCedUre Insert key into ignition. Turn key to ON position. 3 4 Wait, LED will turn solid BLUE for seconds. OFF Turn key to OFF position. ON 5 Module Programming Procedure completed. Omega Research & Development Inc. 04

8 Page 8 of 8 identify VeHiCLe year Locate the Vehicle Identification Number (VIN) and identify the 0th character. Æ 43A5YN5TAL8D5R0X Match the VIN s 0th character to its corresponding year. L > 990 s > 995 y > > 0 a > 00 M > 99 T > 996 > 00 6 > 006 B > 0 n > 99 V > 997 > 00 7 > 0 C > 0 p > 993 W > > > 008 d > 03 r > 994 X > > > 009 e > 04 module diagnostics Led status diagnostics during programming during remote start WITH IGnITIon off Flashing RED Missing/wrong information from firmware or vehicle Incorrectly programmed Incorrectly programmed or connected Solid RED Waiting for more vehicle information Incorrectly programmed Not programmed waiting for more vehicle information Flashing BLUE Additional steps required to complete programming Correctly programmed and operational False ground when running status from remote starter Solid BLUE then OFF Correctly programmed Reset in progress Reset in progress OFF No activity or already programmed Invalid ground when running status from remote starter At rest and ready for a remote start sequence FaCtOry reset PrOCedUre DISCONNECT cartridge from remote starter. PRESS AND HOLD programming button while re-connecting cartridge to remote starter. 3 LED will flash red. Immediately RELEASE programming button. 4 LED will turn solid red for seconds. RESET COMPLETED. 5 RECONNECT all connectors. Repeat programming procedure.! Failure to follow procedure may result with a DTC or a CHECK ENGINE error message. Omega Research & Development Inc. 04