Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Transcription

1 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK High Post Contact: Enquiries +44 (0) Salisbury Tel: +44 (0) Wiltshire Fax: +44 (0) SP4 6AS Website: Testing performed at the above address only DETAIL OF ACCREDITATION Hazardous items including: ENVIRONMENTAL TESTS Ammunition Environmental Testing, including Explosives and Propellants dangerous substances under Firearms sub-divisions of Explosives Class 1 Fuses: Weapons of the UN Dangerous Goods Missile Components Classification System Missiles: Guided Missiles: Unguided Climatic Testing Rocket Motors Concessions for small quantities of Weapons and Sub-assemblies HD 1.1 and HD 1.2 by application Aerospace Components and 50 Kg HD 1.3 Equipment 100 Kg HD 1.4 Non-hazardous items including: Aerospace Structures Dynamic Testing Castings Concessions for small quantities of Compressors HD 1.1 and HD 1.2 by application Computers, Peripherals and other 50 Kg HD 1.3 IT Equipment 100 Kg HD 1.4 Electrical/Electronic Components Connectors and Products Hydraulic Equipment CLIMATIC Radar Equipment Sonar Equipment High Temperature/Low Humidity Def Stan 00-35:1999 & 2006 Telecommunications Equipment Constant and Cyclic Test CL1 and CL2 (A1, A2, A3) Temp Range: 10 C to +95 C (Transit and storage conditions) Max Def Stan 07-55: m x 1 m x 1 m high Test B1, B2 STANAG 2895, 1990 (A1, A2, A3) Temp Range: 10 C to +80 C (Transit and storage conditions) Max BS EN : m x 2.5 m x 2 m high IEC :2007 MIL-STD 810D, E, F & G Method 501 MIL-STD 331B:1994, Test C6 MIL-STD 810E, F & G Assessment Manager: CA Page 1 of 6

2 CLIMATIC (cont d) Low Temperature Def Stan 00-35:1999 & 2006 Constant and Cyclic Test CL4 (Test ab) CL5 (C0, C1, C2, C4, M3) Max Def Stan 07-55: m x 1 m x 1 m high Test B4, B5 STANAG 2895, 1990 Min Temp: -60 C (C0, C1, C2, C4, M3) Max BS EN : m x 2.5 m x 2 m high IEC :2007 MIL-STD 810D, E, F & G Method 502 MIL-STD 331B:1994, Test C6 High Temperature/High Humidity BS 2011:Ca:1977(1987)superseded Constant IEC :1969 superseded Temp Range: 10 C to +95 C Def Stan 00-35:1999 & 2006 Max Test CL7 2 m x 1 m x 1 m high Def Stan 07-55:1975 Humidity Range: 10% rh to 95% rh Test B7 BS EN :Cab:2002 Temp Range: 10 C to +80 C IEC :Cab:2001 Max 1.5 m x 2.5 m x 2 m high Humidity Range: 10% rh to 95% rh High Temperature/High Humidity BS 2011:Db:1977(1987) & 2005 Cyclic IEC :2005 Temp Range: 10 C to +95 C Def Stan 00-35:1999 & 2006 Max Test CL6 (B1, B2, B3) 2 m x 1 m x 1 m high (Transit and storage conditions) Humidity Range: 10% rh to 95% rh Def Stan 07-55:1975 Test B6, B8 Temp Range: 10 C to +80 C Max Method m x 2.5 m x 2 m high MIL-STD 331B:1994, Test C1 Humidity Range: 10% rh to 95% rh BS3G100:Part 2:Section 3: Sub-Section 3.7:1972(1983) STANAG 2895:1990 Tests (B1, B2, B3) (Transit and storage conditions) Assessment Manager: CA Page 2 of 6

3 CLIMATIC (cont d) Thermal Shock BS3G100:Part 2:Section 3: Manual Transfer Sub-Section 3.15:1978(1983) Def Stan 00-35:1999 & 2006 Test CL14 Def Stan 07-55:1975 Test B14 MIL STD 810D, E and F Method 503 PRESSURE LOW/RAPID BS 2011:M:1984 BS EN :M:1999 DECOMPRESSION IEC :M:1983 Min Pressure: 50 mbar Max Method 500 (Procs I and II) 435 mm dia x 570 mm BS3G100:Part 2:Section 3: Sub-Section 3.2:1970(1983) Def Stan 00-35: 1999 & 2006, Test CL9 Sev D & F(4) Def Stan 00-35:1999 & 2006, Test CL20 CORROSION SALT BS 2011:Ka and Kb Temp Range: ambient to +35 C BS EN :Kb:1996 BS EN :Ka: m x 0.5 m x 0.5 m Def Stan 00-35:1999 & 2006, Test CN2 Def Stan 07-55:1982, Test C2 MIL-STAN810D, E and F Method 509 MIL-STAN 331B:1994, Test C3 BS3G100:Part 2:Sub-Section 3.8: 1977(1983) WATER SEALING Def Stan 00-35:1999 & 2006, Max depth 1 m for items up to Test CL m x 0.5 m high Def Stan 07-55:1975, Test D5 Method 512 Assessment Manager: CA Page 3 of 6

4 DYNAMIC Sinusoidal, random, sine on BS EN :Fc:2008 random, random on random, slip BS 2011:Fc:1983 superseded table facility BS 2011:Fd:1973(1984)superseded a) ambient temperature BS3G100:Part 2:Section 3: (electromagnetic) Sub-Section 3.1:1969(1983) BS EN :1995 Frequency Range: Hz Def Stan 00-35:1999 & 2006, Tests M1, M2 Max Payload (vertical): 100 kg Def Stan 07-55:1975, Test A1, A2 Max Displacement: 51 mm pk-pk MIL-STD 810D, E, F & G Method 514 b) High/Low (Standard Chamber) MIL-STD 331B:1994, Tests B1, B2 STANAG 4242:1977 Frequency Range: Hz Max Payload (vertical): 100 kg Max Displacement: 51 mm pk-pk Min Temp: -55 C 1.4 m x 1.1 m x 1.2 m high Max Payload (vertical): 100 kg Max Displacement: 51 mm pk-pk 1.0 m x 1.0 m x 1 m high c) High/Low (Standard Chamber) slip table Frequency Range: Hz Max Payload (vertical): 200 kg Max Displacement: 51 mm pk-pk Max Temp: +80 C Min Temp: -50 C 1.5 m x 1.5 m x 1.0 m high Slip table size: 1.2m x 1.2m Assessment Manager: CA Page 4 of 6

5 DYNAMIC (cont d) Shock Vertical High/Low BS EN :Ga:1987 (Standard Chamber) Def Stan 00-35:1999 & 2006, (electromagnetic) Tests M3, M7 Severity dependant Def Stan 07-55:1975, Tests A3 Half Sine, Sawtooth Severity: 1.5 g to 45 g Method 516 Duration: ms Min Temp: -55 C 1.4 m x 1.1 m x 1.2 m high 1.0 m x 1.0 m x 1 m high BUMP BS EN :Eb:1987 & 1993 (Vibrator Induced) Def Stan 00-35:1999 & 2006, Ambient/High Low Temp Test M12 Def Stan 07-55:1975, Test A5 Severity: 1.5 g to 45 g Duration: ms Method 516 Min Temp: -55 C 1.4 m x 1.1 m x 1.2 m high 1.0 m x 1.0 m x 1 m high SHOCK BS EN :1987 (Free/accelerated fall) Def Stan 00-35:1999 & 2006, (Half sine) Tests M3, M7 Def Stan 07-55:1975, Test A3 Max Severity: 250 kg Pulse Width: 0.2 to 60 ms Method 516 (g dependant) Max Item Mass: 35 kg Table Size: 0.23 m x 0.23 m Assessment Manager: CA Page 5 of 6

6 DYNAMIC (cont d) FREE FALL Def Stan 00-35:1999 & 2006, Drop Surface: Steel plate Test M5 Max Drop Height: 25 m Def Stan 07-55:1975, Test A9 Max Size of Plate: 2 m x 1.5 m Max Item Mass: 35 kg END Assessment Manager: CA Page 6 of 6