CHECK VALVES MUELLER CHECK VALVES TECHNICAL DATA. Flare to Flare. Solder to Solder. Solder to Solder - Extended Ends. Shipped loosely assembled.
|
|
|
- Angela Cummings
- 5 years ago
- Views:
Transcription
1 MUELLER CHECK VLVES TECHNICL DT CHECK VLVES vailable in 1/4 through 5/8 flare sizes and 1/4 thru 7/8 solder sizes. Recognized under the component program of Underwriters Laboratories for use in the US and Canada. Maximum working pressure is 500 PSIG. Maximum temperature rating at +200 F. Flare to Flare P1322 PRT Flare B C WT/E /4 2-3/16 13/16 Hex /8 2-13/32 13/16 Hex / /4 Oct /8 3-3/16 1-1/4 Oct.52 Solder to Solder Shipped loosely assembled. P1323 PRT O.D. B C WT/E /4 1-3/16 13/16 Hex /8 1-5/32 13/16 Hex /2 1-7/16 1-1/4 Oct /8 1-7/16 1-1/4 Oct.37 * Teflon Seat Disc. Solder to Solder - Extended Ends P1441 PRT O.D. B C WT/E /4 4-7/16 13/16 Hex /8 4-9/16 13/16 Hex /2 4-29/32 1-1/4 Oct /8 5-13/64 1-1/4 Oct
2 CHECK VLVES MUELLER FOUR-BOLT CHECK VLVES Technical Data Refrigerants ll fluorinated types Maximum Working Pressure 500 psig Burst Pressure 2500 psig Working Temperature Range -40 F/300 F Pressure Required to Open B <1 psi B <1 psi B psi B psi B psi B psi B psi Recommended Bolt Torques B ft-lb B ft-lb B ft-lb B ft-lb B ft-lb B ft-lb B ft-lb NOTE: Not to be installed with the bonnet facing down. P4232 P4233 FOUR-BOLT CHECK VLVES Part No. Size B C D E C v Weight B /8 3-19/ /16 31/32 7/8 15/ B /8 3-19/ /16 31/32 1-1/ B /8 4-9/16 4-3/4 1-5/16 1-3/8 1-1/ B /8 4-9/16 4-3/4 1-5/16 1-5/8 1-1/ B /8 5-7/8 6-3/8 1-11/16 2-1/8 1-1/ B / / /8 1-7/8 70 B / / /8 1-7/8 * *Consult Factory. 730
3 VLVES MUELLER BLL VLVES Technical Data Refrigerants Maximum Working Pressure Working Temperature Range HFC, CFC, HCFC 700 psig -40 F/300 F P4246 Straight Thru Ball Valve PRT B C D E F** G** SEL CP H** (mm) KIT**** /4 5-7/ /16 5/16 7/8 2-3/4 N 14 M4 x /8 5-1/2 3 5/16 7/8 2-3/4 15/16 14 M4 x /2 6-3/8 3-7/16 3/8 7/8 2-3/4 1-3/16 14 M4 x /8 6-3/8 3-7/16 1/2 7/8 2-3/4 1-3/8 14 M4 x /4 7-7/16 3-7/8 5/8 1-1/4 3-1/2 1-1/2 20 M4 x /8 7-7/16 3-7/8 3/4 1-1/4 3-1/2 1-5/8 20 M4 x /8 8-7/16 4-5/16 7/8 1-9/ /16 1-3/4 25 M4 x / /2 4-3/16 2-1/16 30 M6 x / /2 1-1/8 1-11/16 4-7/8 2-1/4 34 M6 x / /8 2-1/8 5-9/16 2-7/16 34 M6 x /8 13-1/2 6-13/16 1-1/2 *** *** *** 34 M6 x / / /8 3-1/8 34 M6 x * 2-5/ /8 2-1/8 5-5/8 2-3/8 34 M6 x * 3-1/ /16 2-1/8 5-5/8 3-1/16 34 M6 x *Reduced port. **Where applicable. ***Consult factory for details. ****Seal Cap Kit includes seal cap, seal cap gasket, anti-friction ring, cap nut. Prefixed for Ball Valve Options: = Standard C = Standard with access P = Drilled & tapped Q = Drilled & tapped with access Examples: 17860, 3/8 without access C 17860, 3/8 with access 731
4 VLVES MUELLER BLL VLVES (cont) P4245 Mueller 3-Way Ball Valves with ccess Ports PRT B C D E F G WEIGHT U /8 4-7/8 2-21/ / /32 5/16 1/2 41/64.67 U /2 5-3/8 3-3/ /64 4-7/32 3/8 1/2 53/64.70 U /8 5-3/8 2-59/ /64 4-7/64 1/2 1/2 27/32.70 U /4 6-1/4 3-57/ /4 5/8 3/4 55/64 N U /8 5-31/32 3-5/ /32 4-7/8 3/4 3/4 27/ U /8 6-39/64 3-3/16 3-7/ /64 29/ / /8 8-1/16 4-7/ / /64 31/32 1-1/4 1-5/ /8 8-7/8 4-7/ / /64 1-3/32 1-1/2 1-5/ /8 9-5/ / / / / / /8 9-1/ / /32 8-9/ / / /8 8-11/16 4-9/ /32 8-3/ / /
5 MUELLER CTUTED BLL VLVES VLVES Technical Data ctuator Series I Series II Series III Sizes 1/2-7/8 1-1/8-1-5/8 2-1/8-3-1/8 Torque (in.-lb) Power Supply (VC/DC) Power Consumption (W) Running Time (seconds) mbient Temperature ( F) 22 to to to 130 Ball Valve Refrigerants ll Fluorinated Types Maximum Working Pressure (psig) 700 psig Working Temperature Range ( F) -40 to 300 F *Load dependent. **Does not depend on load. P4247 Straight Thru ctuated Ball Valves STRIGHT 3-WY Part No. B C D Part No. E F G H 1/2 W N 2.69 Y N /8 W N 2.69 Y N /4 W N 2.69 Y N /8 W N 2.69 Y N /8 W Y /8 W /8 W /8 W /8 W /8 W
6 MUELLER PCKED LINE VLVES TECHNICL DT PCKED LINE VLVES Non-backseating service valves Forged brass body with integral mounting bracket Plated steel stem suitable for refrigerants and other industrial fluids non-corrosive to brass and steel sbestos-free packing material Maximum pressure rating is 500 PSIG Maximum temperature rating at +300 F ngle Backseating - NPTFE Inlet to Flare PRT C D E COUNTERBORE DIMENSION (F*) WT/E. NPTFE Flare Dia. Depth B /2 1/2 1-13/16 1-5/16 4-1/ / /2 5/8 1-13/16 1-1/2 4-11/ /8.64 P1315 ngle Backseating - NPTFE Inlet to Solder PRT C D E COUNTERBORE DIMENSION (F*) WT/E. NPTFE Flare Dia. Depth B /2 1/2 1-13/ / / /2 5/8 1-13/ / / /4 7/8 2-3/ / P1316 ngle Backseating - Solder to Solder PRT B C D E WT/E /8 5/8 29/ /4.66 P
7 PCKED LINE VLVES MUELLER PCKED LINE VLVES (cont) Two Way - Flare to Flare PRT B C D WT/E /4 3-13/ / / /8 3-13/32 1-1/8 29/ / /2 3-13/32 1-1/4 15/16 1-7/16.56 P1435 Two Way - Solder to Solder PRT B C D WT/E /4 3-13/32 3/4 15/16 1-7/ /8 3-13/32 15/16 29/ / /2 3-13/32 7/8 29/ /32.52 P1436 ngle Non-Backseating - NPTFE Inlet to Flare P1318 PRT FPT B C D E COUNTERBORE DIMENSIONS (F*) WT/E. MPT Flare Dia. Depth B /4 1/4 1 15/16 3-3/ / /4 3/8 1-1/16 1-1/8 3-3/ / /8 1/4 1-1/8 1-1/16 3-3/ / /8 3/8 1-1/8 1-1/8 3-3/ / /8 1/2 1-3/8 1-3/8 3-3/ / /4 1/4 1-3/8 1-1/ / /16.48 *Machined to accept O.D. size tube as indicated. ngle Non-Backseating - Flare to NPTFE PRT C D E COUNTERBORE DIMENSIONS (F*) WT/E. Flare MPT Dia. Depth B /4 1/4 15/ /8.27 *Machined to accept O.D. size tube as indicated. P
8 PCKED LINE VLVES MUELLER PCKED LINE VLVES (cont) P1320 ngle Non-Backseating - Internal Swivel Flare to Flare One soft copper gasket included with each assembly. PRT INTERNL FLRE FLRE B C D E WT./E /4 1/4 1-15/32 1-1/ / /8 3/8 1-1/2 1-1/8 3-9/16.27 P1437 ngle Non-Backseating - Solder To Flare With Seal Cap PRT SOLDER FLRE B C D E WT/E /4* 1/4 23/32 1-1/32 3-3/ /8** 3/8 9/16 1-1/2 3-1/64.49 *lso 3/8 FTG. **lso 1/2 FTG. Transducer Valve PRT STEM CP B C D E F G MTERIL B / /4 1/8 NPTF 1/4 NPTF 1/4 Flare ccess Steel B / /4 1/8 NPTF 1/4 NPTF 1/4 Flare ccess Brass P
9 DIPHRGM VLVES MUELLER PCKLESS DIPHRGM VLVES Technical Data Refrigerants Working Temperature Range Maximum Working Pressure Burst Pressure ll fluorinated types -40 F/+300 F 500 psig with flow in the direction of the arrow on the body 350 psig with flow against the direction of the arrow 2500 psig Straight Thru - Flare to Flare - Type I - Class IV P1317 PRT OPEN B C D WT/E /4 2-11/16 1-5/16 1-3/8 5/ /8 2-11/16 1-3/8 1-27/64 5/ /2 3-15/32 1-5/8 1-27/32 27/ /8 3-15/ / /16 27/ Straight Thru - Solder to Solder - Type I - Class II P1443 PRT OPEN B C D WT/E /4 2-11/16 1-1/32 1-3/32 5/ /8 2-11/16 1-1/32 1-3/32 5/ /2 3-1/2 1-5/16 1-9/16 27/ /8 3-1/2 1-13/64 1-7/16 27/ Extended End - Solder to Solder - Type I - Class II P1438 PRT OPEN B C D WT/E /4 2-11/ / /32 5/ /8 2-11/ /16 2-7/8 5/ /2 3-1/2 3-1/ /32 27/ /8 3-1/2 3-7/ /32 27/ ngle - NPTFE to Flare - Type I P1439 PRT OPEN MPT Flare B C WT/E /4 1/4 2-13/ /64 1-3/ /4 3/8 2-13/ /64 1-3/ /8 1/4 2-7/8 1-19/64 1-5/ /8 3/8 2-7/8 1-27/64 1-5/ /8 1/2 3-9/ / / /2 1/2 3-11/ /32 1-7/ /2 5/8 3-11/ /16 1-7/ ngle - Solder to Solder - Type I - Class I P1440 PRT OPEN O.D. O.D. B C WT/E /4 1/4 2-27/32 1-3/32 3/ /8 3/8 2-27/32 1-3/32 3/ /2 1/2 3-11/16 1-3/16 1-1/ /8 5/8 3-11/16 15/16 15/
10 MUELLER PRESSURE RELIEF VLVES SPECIFICTIONS PSIG Prefix lb air/ PRESSURE RELIEF VLVES DISCHRGE CPCITY B C D E F kg air/ lb air/ kg air/ lb air/ kg air/ lb air/ kg air/ TYPE OF REFRIGERNT Refrigerant 235 D R-11, R-113, R E R-12, R-22, R-134a, R-407c, R G H R-13, R-13b I R-404, R-502, R-507a J lb air/ kg air/ lb air/ kg air/ Value of f Straight Thru NPTFE Inlet to Flare M-art- SME VLVE INLET () OUTLET (B) (C) WT. ECH DISCHRGE TBLE (cm) (lb) (kg) /4 3/8 2-21/ /8 3/8 2-13/ B /8 1/ B /2 5/8 4-3/ C /4 3/ D B /4 3/8 2-13/ B B /4 1/ N N B ngle NPTFE to Flare SME VLVE INLET () OUTLET (B) (C) (D) WT. ECH DISCHRGE TBLE (cm) (cm) (lb) (kg) B /4 3/8 2-3/ / B B /4 1/2 2-7/ / N N B /8 3/8 2-3/ / B /8 1/2 2-3/ / B /2 5/8 4-3/ / C M-art-B M-art-C tmospheric NPTFE Inlet SME VLVE INLET () OUTLET (B) (C) WT. ECH DISCHRGE TBLE (cm) (lb) (kg) /8 1-7/8 3/ /4 2 3/ /8 2-1/ B B /4 2-1/ N N B Straight Thru NPTFE Inlet to NPTFI Outlet M-art-D SME VLVE INLET () OUTLET (B) (C) WT. ECH DISCHRGE TBLE (cm) (lb) (kg) / E /4 1-1/ F Straight Thru-Straight Thread Inlet to NPTFI Outlet M-art-E SME VLVE INLET () OUTLET (B) (C) WT. ECH DISCHRGE TBLE (cm) (lb) (kg) B /8-14 UNF 2 3/4 7/ D B /16-14 UNF / E B /8-14 UNF 2 1-1/ F Prefixes for standard settings are: D = 235 psig, E = 300 psig, G = 350 psig, H = 400 psig, I = 425 psig, J = 450 psig 738
11 MUELLER NGLE ISOLTION VLVES Solder X Solder ngle Isolation Valve ISOLTION VLVES TECHNICL DT Part No. B B B B B B B B B B Torques to Seal (ft-lb) Front Seat Back Seat Pack Gland Flare Seal Cap Rotolock Nut N N N N N Seal Cap Finger Tight Finger Tight Maximum Working Pressure (psig) Burst Pressure (psig) Working Temperature Range ( F) -40/300-40/300-40/300-40/300-40/300-40/300-40/300-40/300-40/300-40/300 Refrigerants ll Fluorinated Types PRT TYPE Cv B C D E F B /8 5/8 ODS x 5/8 ODS / /32 27/ /64 1/2 1/2 B /8 7/8 ODS x 7/8 ODS /16 3-3/32 29/ /64 3/4 3/4 B /8 1-1/8 ODS x 1-1/8 ODS / /64 1-5/16 1-1/2 15/16 15/16 B /8 1-3/8 ODS x 1-3/8 ODS /64 4-3/16 1-1/2 1-29/ B /8 1-5/8 ODS x 1-5/8 ODS / /16 1-3/4 2-3/16 1-3/32 1-3/32 P4241 Solder X Rotolock ngle Isolation Valve PRT TYPE Cv B C D E F G B /8 5/8 ODS x 1 THD /64 2-1/4 35/64 15/16 35/64 11/64 1/2 B /8 7/8 ODS x 1-1/4 THD / /64 3/4 1-3/64 3/4 1-17/64 3/4 B /8 1-1/8 ODS x 1-1/2 THD / / /64 15/16 B /8 1-3/8 ODS x 1-3/4 THD / /64 1-1/4 1-13/32 1-1/4 1-29/32 1 B /8 1-5/8 ODS x 2-1/4 THD / /64 1-1/2 1-9/16 1-1/2 2-3/16 1-3/32 P
12 MUELLER CHNGEOVER MNIFOLD CHNGEOVER MNIFOLD PRT INLET OUTLETS B C D E F (In.) /2 NPTFE 1/2 NPTFI 6 1-3/4 1-3/4 1-3/8 2-1/16 3/ /4 NPTFE 3/4 NPTFI 6 1-3/4 1-7/8 1-3/8 2-1/16 3/ NPTFE 1 NPTFI 8-11/16 2-7/16 2-3/8 1-7/8 3-1/8 1-7/ /4 NPTFE 1-1/4 NPTFE 8-7/8 2-7/16 2-7/16 2-1/8 3-1/8 1-7/16 B /8-14 UNF 2 7/8-14 UNF 2B 6 1-3/4 1-5/8 1-3/8 2-1/16 3/4 B /16-12 UNF 2 1-5/16-12 UNF 2B 8-9/16 2-7/16 2-1/8 1-3/4 3-1/8 1-7/16 B /8-12 UNF 2 1-5/8-12 UNF 2B 8-9/16 2-7/16 2-1/8 1-13/16 3-1/8 1-7/16 P
13 MUELLER COMPRESSOR VLVE KITS COMPRESSOR VLVE KITS TECHNICL DT KIT PRT Maximum Working Pressure (psig) Burst Pressure (psig) Working Temperature Range ( F) -40/300-40/300-40/300-40/300-40/300-40/300-40/300 Fluid Compatibility ll Fluorinated Types Torques To Seal Front Seat (ft-lb) Back Seat (ft-lb) Pack Gland (ft-lb) Pipe Plug (ft-lb) 2-3 Threads Exposed Seal Cap (ft-lb) Plastic N Brass Steel NOTE: Each kit includes valve body, cap, gaskets, and bolts to perfectly match compressor. Double Port 45 Flare Type P4251 P4252 P4253 Double Port 45 Flare Type Forged Brass Body KIT PRT FLRE B C D E F BOLT CENTERS DI. BOLT HOLES PIPE PLUG FLNGE THICKNESS COPELND /8 9/32 1-3/4 4-9/16 5/8 1-1/4 1-5/8 11/32 1/8 7/ /2 9/32 1-7/8 4-11/16 5/8 1-1/4 1-5/8 11/32 1/8 7/ /8 9/ /16 5/8 1-1/4 1-5/8 11/32 1/8 7/ Double Port P4254 P4255 P4256 Double Port Solder Type Forged Brass Body KIT PRT FLRE B C D E F G BOLT CENTERS DI. BOLT HOLES PIPE PLUG FLNGE THICKNESS COPELND /8 9/32 1-9/32 4-3/32 5/8 1-1/4 31/32 1-5/8 11/32 1/8 7/ /2 9/ /32 4-3/32 5/8 1-1/4 1-1/32 1-5/8 11/32 1/8 7/ /8 9/ / /32 5/8 1-1/4 1-1/32 1-5/8 11/32 1/8 7/
14 MUELLER COMPRESSOR VLVE KITS COMPRESSOR VLVE KITS TECHNICL DT KIT PRT Maximum Working Pressure (psig) Burst Pressure (psig) Working Temperature Range ( F) -40/300-40/300-40/300-40/300-40/300-40/300-40/300-40/300-40/300-40/300 Fluid Compatibility ll Fluorinated Types Torques To Seal Front Seat (ft-lb) Back Seat (ft-lb) Pack Gland (ft-lb) Pipe Plug (ft-lb) 2-3 Threads Exposed Seal Cap (ft-lb) Plastic Hand Tight Cast Iron Hand Tight NOTE: Each kit includes valve body, cap, gaskets, and bolts to perfectly match compressor. Flanged Union Style P4263 P4264 P4265 Flanged Union Style Solder Type Cast Iron Valve Body KIT PRT TUBE B C D E F G H J K L M BOLT DI BOLT CENTERS HOLES COPELND /8 2-1/8 4-17/ /16 2-1/8 2-3/4 1-13/ /32 3-3/16 1/4 1/4 2-11/16 2-1/2 17/ /8 2-1/8 4-17/ /16 2-1/8 2-3/4 1-13/ /32 3-7/16 1/4 1/4 2-11/16 2-1/2 17/ /8 3-7/8 6-1/ / /32 4-5/32 2-1/ /32 1/4 1/4 4-21/32 2-5/8 11/ /8 3-7/8 6-1/ /32 4-5/32 2-1/ /16 1/4 1/4 4-5/8 3-7/8 11/ /8 3-1/16 5-1/ / /32 3-7/32 2-3/8 2-3/16 3-3/4 1/4 1/4 3-7/16 3-1/16 11/ /8 3-1/16 5-1/4 12-1/8 2-17/32 3-7/32 2-3/8 2-3/16 4-5/32 1/4 1/4 3-7/16 3-1/16 11/
15 MUELLER COMPRESSOR VLVE KITS COMPRESSOR VLVE KITS TECHNICL DT KIT PRT Maximum Working Pressure (psig) Burst Pressure (psig) Working Temperature Range ( F) -40/300-40/300-40/300-40/300-40/300-40/300-40/300-40/300-40/300 Fluid Compatibility ll Fluorinated Types Torques To Seal Front Seat (ft-lb) Back Seat (ft-lb) Pack Gland (ft-lb) Pipe Plug (ft-lb) 2-3 Threads Exposed Seal Cap (ft-lb) Plastic Hand Tight Brass N N N N N Steel N NOTE: Each kit includes valve body, cap, gaskets, and bolts to perfectly match compressor. Straight Port P4257 P4258 P4259 Straight Port Solder Type Forged Brass Body KIT PRT FLRE B C D E F G H BOLT CENTERS DI. BOLT HOLES PIPE PLUG FLNGE THICKNESS COPELND /8 3/4 1-31/32 6-9/16 7/8 1-1/2 1-7/ /8 11/32 1/8 1-21/ /8 3/4 2-1/ /16 7/8 1-1/2 1-5/ /8 11/32 1/8 1-21/ /4 3/4 1-29/32 6-1/2 7/8 1-1/2 1-9/ /8 11/32 1/8 1-21/ Flanged Union Style P4260 P4261 P4262 Flanged Union Style Solder Type Forged Brass Body KIT PRT FLRE B C D E G H BOLT CENTERS DI. BOLT HOLES PIPE PLUG FLNGE THICKNESS COPELND / /32 7-1/2 1-1/4 1-9/16 1-1/8 2-3/4 17/32 1/ / /32 7-1/2 1-1/4 1-1/2 1-1/8 2-3/4 17/32 1/ / / /32 1-1/4 1-9/16 1-1/8 2-3/4 17/32 1/
16 MUELLER FUSIBLE CONNECTORS Fusible Connectors Half Union Flare to NPTFE FUSIBLE CONNECTORS Listed by Underwriters Laboratories, Inc., for use in the US and Canada Part No. Size Melting Old Per B C D Temp* Part No. Flare NPTFE Hex Ctn. ( F) Wt/Ea. FU-4B-* /4 1/4 9/16 3/16 1-1/4 9/16 3/ FU-4C-* /4 3/8 11/16 3/16 1-5/16 9/16 1/ FU-6C-* /8 3/8 11/16 9/32 1-7/16 9/16 1/ FU-4B-* /4 1/4 9/16 3/16 1-1/4 9/16 3/ FU-4C-* /4 3/8 11/16 3/16 1-5/16 9/16 1/ FU-6C-* /8 3/8 11/16 9/32 1-7/16 9/16 1/ FU-4B-* /4 1/4 9/16 3/16 1-1/4 9/16 3/ FU-4C-* /4 3/8 11/16 3/16 1-5/16 9/16 1/ FU-6C-* /8 3/8 11/16 9/32 1-7/16 9/16 1/ P4239 *Melting Temperature Equivalents 283 F (139 C), 210 F (99 C), 168 F (76 C). ex) FU-4B-283 Fusible Pipe Plugs Listed by Underwriters Laboratories, Inc., for use in the US and Canada Part No. Old Size Melting Pcs, B Part No. NPTFE Hex Temp* ( F) Per Ctn. Wt/Ea. FP--* /8 7/16 7/32 19/ FP-B-* /4 9/16 1/4 25/ FP-C-* /8 11/16 3/8 27/ FP--* /8 7/16 7/32 19/ FP-B-* /4 9/16 1/4 25/ FP-C-* /8 11/16 3/8 27/ FP--* /8 7/16 7/32 19/ FP-B-* /4 9/16 1/4 25/ FP-C-* /8 11/16 3/8 27/ P4240 *Melting Temperature Equivalents 283 F (139 C), 210 F (99 C), 168 F (76 C). ex) FP
CHECK VALVES. Flare to Flare. Solder to Solder. Solder to Solder - Extended Ends. Shipped loosely assembled.
CHECK VLVES MUELLER CHECK VLVES DESIGN FETURES 1. Soft neoprene seat provides positive seal against reverse flow. 2. Four space tabs maintain washer/seat alignment and guide the seat disc for smooth operation.
Quality Components For The Most Demanding Refrigeration Systems.
Quality Components For The Most Demanding Refrigeration Systems. J K EVAPORATOR I H A B CONDENSER G F D C HEAT RECLAIM D E A B C D E F Compressor Valve, pg. 6 Way Actuated Ball Valve/Heat Reclaim, pg.
2 RoHS Compliant. Comply with ISO 9001 Standards.
TECHNICAL CATALOG 2 RoHS Compliant. Comply with ISO 9001 Standards. Mueller Refrigeration is a global leader the design and manufacturg of premium performance valves, protection devices, and brass fittgs
REPLACEMENT PARTS DIRECTOVALVE AA344AE-2/3 & AA344AEC-2/3. Code 4 A
REPLCEMENT PRTS BLL VLVES SOLENOID VLVES DIRECTOVLVE 344E-2/3 & 344EC-2/3 ITEM STOCK NO. MFG. NO. DESCRIPTION PRICE E. 1 1236 CP20113-PP Cover $ 11.43 2 1237 20122-1-SS Motor #344E 254.58 2 1238 20122-3-SS
Chlorine Valves and Accessories
Chlorine Valves and Accessories Chlorine Cylinder & Ton Container Valves Standard Chlorine Institute Design & Alternate Design 1 ALTERNATE VALVE DESIGN vs. STANDARD CHLORINE INSTITUTE VALVE DESIGN FOR
Refrigeration K-211. Replacement Parts. Chillers, Condensers. Compressors, Motors. Electrical. Components. Heating. Indoor Air Quality.
EMERSON CLIMATE TECHNOLOGIES-Oil Controls High Efficiency Centrifugal Oil Separator The High Efficiency Centrifugal Oil Separator is used in ultra-low temperature systems with long refrigerant lines or
BACKFLOW PREVENTERS DUAL-CHECK BACKFLOW PREVENTER WITH ATMOSPHERIC VENT T/S-459 Certified to ASSE Standard 1012
CKFLOW PREVENTERS DUL-CHECK CKFLOW PREVENTER WITH TMOSPHERIC VENT T/S-459 Certified to SSE Standard 1012 Certified to CS Standard 64.3 Forged brass construction Threaded or sweat true union end connections
Vacuum Relief Performance Curves
Vacuum Relief Valves Crispin Vacuum Relief Valves Valve Function llows air to enter system when vacuum occurs Prevents air exhaustion during pump start-up Features Cracks open to admit air at.25 PSIG differential
CYCLEMASTER Ball Valves
Standard Design Pressure (DP) / Maximum abnormal pressure (MAP): Up to 775 psig, 53 bar Contuous operatg temperature (COT): 40 F/300 F, 40 C/149 C Full port construction to match le size ID i directional
Check Valves. E Check Valves E-1. Quick Coupling Division 8145 Lewis Road Minneapolis, MN
Check Valves E-1 Check Valves Introduction Multiple Hydraulic System pplications Parker Check Valves are unidirectional flow control devices used primarily in hydraulic systems to eliminate potential damage
HANDBOOK VALVES. Ed VALVES VR-ED 02/ ENG 1
HANDBOOK Ed. 2017 1 CHAPTER 1 WITH SCREW SHUTTER FOR REFRIGERATION PLANTS THAT USE HCFC, HFC OR HFO REFRIGERANTS APPLICATIONS All valves illustrated in this chapter are designed for installation on commercial
Hose Length Custom Length Supply Line Options Ball Valve w/ PT UBY Strainer w/ PT and BDV
Model AC Circuit Sentry Automatic Balance Hose Kits - Submittal Hose Kit Size Flow Range *MFR Qty. 1/2".33-14 5 3/4".33-14 11 3/4" 5-50 11 1".33-14 20 1" 5-50 20 1-1/4" 5-50 30 **1-1/2" 5-50 44 **1-1/2"
NEEDLE VALVE GAUGE VALVE VALVE MANIFOLD BALL VALVE ACCESSORIES
NEEDLE VLVE GUGE VLVE VLVE MNIFOLD BLL VLVE CCESSORIES Index Introduction ----------------------------- Valve Manifold VM0 ---------- Product Feature ----------------------- Valve Manifold VM0 ----------6
VALVULAS. Modelo 215V, 337 Sección VIII, Vacío De Asme Aire/Gas, Válvulas De Seguridad Certificadas Tarjeta Nacional ' UV'
VLVULS Modelo 215V, 337 Sección VIII, Vacío De sme ire/gas, Válvulas De Seguridad Certificadas Tarjeta Nacional ' UV' Descripciones Modelo Model 337: Tiene dispositivo para la elevación 'tirar-anillo'
HERMETIC VALVES APPLICATIONS
Valves HERMETIC VALVES APPLICATIONS The hermetic valves, shown in this chapter, are classified Pressure accessories in the sense of the Pressure Equipment Directive 97/23/EC, Article 1, Section 2.1.4 and
CONTENTS Bushings and Hubs
CONTENTS s and Hubs TPER-LOCK s Features/Benefits............................................................. PT6-2 Nomenclature................................................................. PT6-2
FORGING AHEAD OF THE REST
Bonney orge The Name You Trust for orged Steel Valves Bonney orge's forged steel valves and piping components have led the way for over eighty years in state-ofthe-art design and dependable performance.
Product Catalogue DESIGNED FOR PERFORMANCE.
Product Catalogue DESIGNED FOR PERFORMANCE www.henrytech.com GENERAL INFORMATION The information contained in this catalogue is correct at the time of publication. Henry Technologies has a policy of continuous
VB-7000 Series 1/2 to 2 Globe Valves
V-7000 Series 1/2 to 2 Globe Valves with MG350V Series SmartX ctuators schneider-electric.com 1 Product Description Schneider Electric MG350V non-spring actuators and V-7000 series two and three-way globe
KTM MODEL NB / MB THREE-WAY BALL VALVES 2-SEATS (L-PORT) AND 4-SEATS (L AND T-PORT)
KTM MODEL N / M THREE-WY LL VLVES 2-SETS (L-PORT) ND 4-SETS (L ND T-PORT) single KTM 3-way ball valve replaces several 2-way valves, saving valuable space and simplifying piping FETURES Positive alignment
MALE X FEMALE LARGE-PORT BALL VALVE T-900 M x F and T-900 M x F-T
MLE X FEMLE LRGE-PORT LL VLVE T-900 M x F and T-900 M x F-T urable forged brass construction Space-saving male-by-female end connections are ideal for confined piping installations T-handle equipped models
Safety relief valves and double stop valves, type SFVL and DSVL REFRIGERATION AND AIR CONDITIONING. Technical leaflet
Safety relief valves and double stop valves, type and REFRIGERATION AND AIR CONDITIONING Technical leaflet Technical leaflet Introduction The safety valves are backpressure dependent pressure relief valves.
Gauge valves Type SNV-ST and SNV-SS
Data sheet Gauge valves Type and SNV-SS and SNV-SS valves are designed to meet all industrial refrigeration application requirements. Designed as service valves they provide favourable flow characteristics.
Superior Supplying Quality Products To The ACR Industry Since 1938
Catalog No. R-200 Superior Supplying Quality Products To The CR Industry Since 98 ir Conditioning and Refrigeration Valves, Wrot and Flare Fittings, and ccessories Catalog No. R-200 ir Conditioning and
VB-7000 Series. Selection Guide. Applications. Applicable Literature. Selection Guide Contents
V-7000 Series Selection Guide T V-7000 Series 1/2 to 2 Globe Vlves with Fort M400, M800, nd M1500 ctutors pplictions T Fort M400, M800, nd M1500 series liner ctutors mount directly 1 onto 1/2 to 2 V-7xxx
WEIGHT (lb) PART NO WITH ACCESS CONNECTION (ODS) BALL PORT DIAMETER WA WAS
SUPERIOR - BALL VALVES WA SERIES (WELDED) WAS Series (Welded with Access Fittings) Full Service Temperature Range of -40 F to +325 F. Forged Brass Body and Seal Cap. Design Working Pressure: 700 psig.
DCAP Series 40-4 X X - X X X. Dual Check w/ Atmospheric Port Backflow Preventers
Dual Check w/ Atmospheric Port DCAP Series DUAL CHECK WITH ATMOSPHERIC PORT BACKFLOW PREVENTER The Apollo DCAP Series Backflow Preventer is designed to protect residential and commercial water supply lines
SUPERIOR HVACR PRODUCTS CATALOG
HVACR PRODUCTS CATALOG R A SHERWOOD OD COMPANY SWD025 205 5S Sherwood od Valve, LLC LC MADE IN USA www.sherwoodvalve.com w wood od 888.508.258 8 58 A History of Quality and Innovation For nearly a century,
SERIES V. High Performance Segmented Ball Valve
SERIES V High Performance Segmented Ball Valve Publication SV000-101 Issue 02/17 Rev. D General Information High Rangeability: 300:1 Turn down ratio Flow Characteristic: Equal Percentage Low Pressure Recovery
HANDBOOK VALVES. Ed VALVES VR-ED 02/ ENG 1
HANDBOOK Ed. 2017 1 2 INDEX CHAPTER 1 CHAPTER 2 CHAPTER 3 CHAPTER 4 CHAPTER 5 CHAPTER 6 CHAPTER 7 CHAPTER 8 CHAPTER 9 CHAPTER 10 CHAPTER 11 CHAPTER 12 CHAPTER 13 CHAPTER 14 Valves with screw shutter For
2 NPT FILTER REPLACEMENT SCREENS FOR 1 1/4 & 2 FILTERS
ALUMINUM Y FILTERS 50 GPM Rating is with the lowest flow screen with no head loss. 200 PSI Max Working pressure. 80 GPM Rating is with the lowest flow screen with no head loss. 200 PSI Max Working pressure.
HVAC Products 2016 EDITION NCI CANADA INC.
HVAC Products 2016 EDITION NCI CANADA INC. YOUR SINGLE SOURCE SOLUTION NCI Canada Inc. is a Canadian National master distributor of high quality valves, fittings, pipes and related products serving residential,
1 1/4 NPT FILTER 2 NPT FILTER REPLACEMENT SCREENS FOR 1 1/4 & 2 FILTERS 1 1/4 SCREENS 2 SCREENS. Hole Size Designation 150 Mesh 1M150
ALUMINUM Y FILTERS 50 GPM Rating is with the lowest flow screen with no head loss. 200 PSI Max Working pressure. 80 GPM Rating is with the lowest flow screen with no head loss. 200 PSI Max Working pressure.
Brass Full Port Ball Valve IPS 600 WOG 150 SWP
Brass Full Port Ball Valve IPS 600 WOG 150 SWP Material of Valve s Body Cast Brass Ball...Chrome Plated Brass Stem Packing.Teflon Stem.Brass Stem Gland Screw.Brass Handle.Zinc Plated Steel IPS BLL VLVE
FLANGED BALL VALVES ASME CLASS 150 & 300
FLNGED BLL VLVES SME CLSS 150 & REDUCED BORE: 1/2 (DN 15 500) SERIES 7000 The Jamesbury polymer-seated flanged ball valves provide industry leading performance and reliability. Offered in a wide variety
BOSHART INDUSTRIES BRASS GATE VALVE WITH DRAIN
BOSHART INDUSTRIES 2-2 SERIES 0813 BRASS GATE VALVE WITH DRAIN 0 PSI W.O.G. (Cold water, oil, gas) Black cast hand wheel Non-rising stem - solid wedge disc Threaded & CxC 0813-05 0813-07 0813-0.508 0.760
Be llows-se aled Valve s
www.swagelok.com Be llows-se aled Valve s U Secondary containment system above the bellows Working pressures up to 2500 psig (172 bar) Temperatures up to 1200 F (648 C) 1/4, 3/8, 1/2, 3/4, and 1 in.; 6,
HVAC-R COPPER TUBE AND FITTINGS
INDEX ADAPTERS FEMALE CONNECTION C FPT... 14-5 MALE CONNECTION C MPT... 14-4 CAP CONNECTION C... 14-4 COPPER TUBE STRAP TWO-HOLE... 14-5 COUPLINGS REDUCING CONNECTION C C... 14-4 ROLLED STOP CONNECTION
D I V I S I O N O F M A R S H B E L L O F R A M
PH Regulator Large Capacity Working Media Include ir, Steam and Liquids ll Vents are Tapped The PH is a direct operating pressure reducing regulator with large capacity. Ideally suited for uses in oil
THREE-VALVE BATH & SHOWER Cast Brass Body
THREE-VALVE BATH & SHOWER Cast Brass Body 11" Centers, I.P. Unions, Compression Stems, Replaceable Seats 0951 Series Bath Valve only 0961 Series Bath Valve with Spout 0971 Series Bath Valve with Spout
Model descriptions. Technical data. Pressure and Temperature Limits Models 19, 20, 20P: -60 to 406 F Models 19M, 20M, 20MP:
VALVES & CONTROLS KUNKLE SAFETY AND RELIEF PRODUCTS Non-code Bronze Liquid Relief Valves Model descriptions Model 20 Model 19: All bronze, equipped with handwheel for easy adjustment within spring ranges.
Valve Selection. 1. Function and service considerations
1. Function and service considerations Valve Selection Selection Valves serve the purpose of controlling the fluids in building services piping. Valves are produced in a variety of design types and materials.
229 B-Line series Pipe Hangers & Supports
accessories offered in this section are designed to reduce installation time. wide range of types and sizes are available for various applications. Materials For maximum loading design, Carbon Steel, Forged
3-Way Ball Valve Assemblies Using TAC DuraDrive Actuators
3-Wy Bll Vlve Assemblies Using TAC DurDrive Actutors Note: All vlve sizes ANSI Clss IV (0.01% of C v ) shut off, piped coil-side outlet to A. Tble-5 Selection Chrt3-Wy Mixing Bll Vlve Assemblies with TAC
Alpha Series Systems
GENERL INFORMTION LPH SERIES SYSTEM EQUIPMENT DESCRIPTION The Chemetron Fire Systems are automatic suppression systems using the FM-200 chemical agent and consisting of four basic components and their
HERMETIC VALVES. 118
VALVES 117 HERMETC VALVES APPLCATONS The hermetic valves, shown in this chapter, are classified Pressure accessories in the sense of the Pressure Equipment Directive 97/3/EC, Article 1, Section.1.4 and
Alpha Series Systems
GENERL INFORMTION LPH SERIES SYSTEM EQUIPMENT DESCRIPTION The Chemetron Fire Systems are automatic suppression systems using the FM-200 chemical agent and consisting of four basic components and their
Lubrication Installation Components, Accessories & Fittings Table of Contents
Lubrication Installation Components, Accessories & Fittings Table of Contents Lubrication Fittings & Accessories: Introduction............................................. 2 Threaded Fittings........................................
P200 Pressure Regulator
P200 Pressure Regulator Minimize Sudden Downstream Load Change Wide Pressure Ranges P202 has internal relief valve for overpressure protection The P200 series pressure regulator is a manual, direct acting,
A. American National Standards Institute: 1. ANSI Z Relief Valves for Hot Water Supply Systems.
SECTION 220523 - PLUMBING VALVES PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Ball valves. 2. Butterfly valves. 3. Swing check valves. 4. Spring loaded check valves. 5. Water pressure reducing
P95H Regulator Applications P95H Part Matrix Specifi cations Materials of Construction P95H Flow Coeffi cients Wide Open Coeffi cients
PH Regulator Large Capacity Working Media Include ir, Steam and Liquids ll Vents are Tapped The PH is a direct operating pressure reducing regulator with large capacity. Ideally suited for uses in oil
Series AIR LINE COMPRESSED AIR DISTRIBUTION SYSTEM
Series IR LINE COMPRESSED IR DISTRIUTION SYSTEM 26 IR LINE IR DISTRIUTION SYSTEM FETURES ND ENEFITS Installation ease: IR LINE installations can be carried out easily by the end-user, eliminating the need
PROCESS & AUTOMATED VALVES
Process & utomated Valves HYDC s line of Process and utomated Valves complements our isolation valve knowhow and ability to supply high quality solutions to your valve requirements. 3-1 HV Series Inline
Page Concealed Flush Valve (1976 on)
8T _ Series Concealed Flush Valve (16 on) 2 10 14 11 15 1 8 OSC. HANDLE 16 1 10 14 1 12 15 8 4 1 /8" PUSH BUTTON 16 5/8" PUSH BUTTON 5 " PUSH PLATE OUTLETS See Page 40 18 21 2 22 20 6 FOOT PEDAL REPAIR
Safety relief valves and double stop valves, type SFVL and DSVL REFRIGERATION AND AIR CONDITIONING. Technical leaflet
Safety relief valves and double stop valves, type and REFRIGERATION AND AIR CONDITIONING Technical leaflet Technical leaflet Introduction The safety valves are backpressure dependent pressure relief valves.
MACHINES RECOVERY. 99 Washington Street Melrose, MA Phone Toll Free SYSTEMS SUPEREVAC
99 Washington Street Melrose, MA 02176 Phone 781-665-1400 Toll Free 1-800-517-8431 Visit us at www.testequipmentdepot.com RECOVERY SUPEREVAC HOSES 29 RECOVERY HOSES 1/4" 4-IN-1 BALL VALVE TOOL For vacuum,
1 1/4 NPT FILTER SIZE DESIGNATION PRICE 2 NPT FILTER REPLACEMENT SCREENS FOR 1 1/4 & 2 FILTERS 1 1/4 SCREENS 2 SCREENS HOLE SIZE DESIGNATION PRICE
ALUMINUM Y FILTERS 50 GPM Rating is with the lowest flow screen with no head loss. 200 PSI Max Working pressure. 80 GPM Rating is with the lowest flow screen with no head loss. 200 PSI Max Working pressure.
Lab Specialty Products Technical Information TECHNICAL INFORMATION WEIGHTS & DIMENSIONS
Lab Specialty Products Technical Information TECHNICL INFORMTION WEIGHTS & DIMENSIONS Contact Spears for any Information not found. Page 569 Lab Ball s Sample Engineering Specification ll thermoplastic
Combination Clutch/Brake
ombination lutch/brake For metalforming equipment Fast, smooth cycling ool running with higher torque ompact disc design Simple Installation Multiple mounting options for compatability with other competitive
V5013B,C,F Three-Way Mixing and Diverting Valves
V50,C,F Three-Way Mixing and Diverting Valves FETURES PRODUCT DT Mixing or diverting models. ronze body with threaded connections or cast iron body with flanged-end connections. Stainless steel stem and
SECTION VALVES PART 1 -GENERAL
SECTION 1571 0 VALVES PART 3- EXECUTION General Shut-off Valves Balancing Valves Drain Valves RELATED WORK Section 15430- Plumbing Specialties Section 15450- Plumbing Equipment PART 1 -GENERAL SCOPE This
SECTION GENERAL-DUTY VALVES FOR HVAC PIPING. A. Contents of Division 23, HVAC and Division 01, General Requirements apply to this Section.
SECTION 23 05 23 PART 1 - GENERAL 1.1 SUMMARY A. Work Included: 1. Gate Valves 2. Balancing Valves 3. Ball Valves 4. Butterfly Valves 5. Swing Check Valves 1.2 RELATED SECTIONS A. Contents of Division
MARINE VALVES AND FITTINGS
Sea Flange Valves APOLLO FULL FLOW SEA FLANGE VALVES An 85-5-5-5 bronze ball type valve developed to replace plug and other types of sea cocks in the boating industry. Features like these make the full
G Series Investment Cast Stainless Steel Ball Valves
G Series Investment ast Stainless Steel all Valves G1 E Reduced port NPT ends to NSI 1.2.1 One piece body lowout-proof stem (Ring lock with 1 /4" to 3 /8", Latch lock with 1 /2" to 2") omplies with NE
QUICK SELECTION GUIDE
QUICK SELECTION GUIE HERMETIC FILTER RIERS TYPE FILTER RIER PGE RECOMMENE USE FUNCTION Liquid EK 209 CFC, HCFC, HFC Premium Universal Replacement Liquid K 22 CFC, HCFC High cid and Water Removal Liquid
Features: Dimensions (in.) Number Size A B C D E F G H WT/100
Apollo Full Flow Sea Flange Valves An 85-5-5-5 bronze ball type valve developed to replace plug and other types of sea cocks in the boating industry. Features like these make the full flow Apollo Sea Flange
P200 Pressure Regulator
P200 Pressure Regulator Minimize Sudden Downstream Load Change Wide Pressure Ranges P202 has internal relief valve for overpressure protection The P200 series pressure regulator is a manual, direct acting,
TEMPERATURE REGULATORS W91/W94 Series
Self-Operated Temperature Regulators Watson McDaniel reserves the right to change the designs and/or materials of its products without notice. 2010 Watson McDaniel Company Self-Operating Design Indicating
VB VALVES & AUTOMATION
Introduction to Valve What are Valves? Valves are mechanical device that controls the flow and pressure within a system or process. They are essential components of a piping system that conveys liquids,
KEYSTONE SERIES GR RESILIENT SEATED BUTTERFLY VALVES GRW/GRL
heavy duty industrial resilient seated butterfly valve GRW - Wafer body design GRL - Lugged body design FETURES GENERL PPLICTION Water, air, dry bulk conveying etc. These valves are for any service where
Shut-off valves in stainless steel SVA-S SS
Technical brochure Shut-off valves in stainless steel In certain specific areas such as outdoor applications and corrosive atmospheres, such as coastal installations, there is a need for high surface protection
TECHNICAL CATALOGUE BUILD-IN VALVES AND SUPPLY STOPS
TECHNICL CTLOGUE BUILD-IN VLVES ND SUPPLY STOPS TEC ITP Sp, founded in Lumezzane (Brescia) in 1972, is currently one of the leading production companies in Italy of valves, fittings and distribution manifolds
Stop valves SVA-DL & SVA-DH
MAKING MODERN LIVING POSSIBLE Technical brochure Stop valves SVA-DL & SVA-DH 250-300 SVA-DL and SVA-DH are angleway stop valves designed to meet all industrial refrigeration application requirements. SVA-DL
packless valves Packless Valves Index Bellows & Diaphragm
Packless Valves Bellows & Diaphragm Index 0300 Series (Bellows) 1 4100 Series (Bellows) 4 4200 Series (Bellows) 8 4500 Series (Bellows) 11 4600 Series (Diaphragm) 13 DV1 Series (Diaphragm) 17 HOKE Inc.
Shut-off valves Types SVA-DL and SVA-DH
Data sheet Shut-off valves Types SVA-DL and SVA-DH 250-300 SVA-DL and SVA-DH are angleway shut-off valves designed to meet all industrial refrigeration application requirements. SVA-DL (Delta pressure
W94. Specifications. Protection: Models Temperature Range Capillary Length Sensing Bulb Valve Body Selection
Temperature Model W91 (No Indicating Dial) W94 (Temperature Indicating Dial) Service Water, Steam, Other Liquids Sizes 1/2 4 onnections Threaded, Union Ends, 125# FLG 250# FLG (optional) ody Material 1/2
SECTION GENERAL-DUTY VALVES FOR PLUMBING PIPING
SECTION 22 05 23 PART 1 - GENERAL 1.1 SUMMARY A. Work Included: 1. Valves, General 2. Gate Valves 3. Balancing Valves 4. Ball Valves 5. Swing Check Valves 6. Backflow Prevention Assemblies 7. Pressure
Pressure Relief Valve Maintenance Manual
Technical Manual 1098T Pressure Relief Valve Maintenance Manual Farris Engineering Division of Curtiss-Wright Flow Control Corporation TABLE OF CONTENTS - Manual Revision 0 Introduction & Safety Tips...
Modulating Water Valves and Bulb Wells
Modulating Water Valves and ulb Wells PPLITION: These modulating valves regulate the flow of water to the heat exchanger to maintain a desired exiting oil temperature. They open automatically when temperature
84000 Series Sanitary Control Valves
ulletin 84000 Series Sanitary Valves 84000 Series Sanitary Control Valves Designed to satisfy the stringent demands of the pharmaceutical and biotechnology industries, these valves are in compliance with
2200 North Main Street Washington, PA PH: FX:
2200 North Main Street 2200 North Main Street KVAB SERIES MEDICAL VALVES All valves MRI compatible - approved to 3 Tesla. Nominal stroke is 1.5 turns. Full flow at ⅓ turn. Strong, durable body is made
P200 Pressure Regulator
P200 Pressure Regulator Minimize Sudden Downstream Load Change Wide Pressure Ranges P202 has internal relief valve for overpressure protection The P200 series pressure regulator is a manual, direct acting,
PRESSURE RELIEF / SUSTAINING CONTROL VALVES
PROJECT NAME LOCATION PRESSURE RELIEF / SUSTAINING CONTROL VALVES INTRODUCTION This specification covers the design, manufacture, and testing of 1 in. (25 mm) through 36 in. (900 mm) Control Valves PART
Flowrite VF 599 Series Two-Way Valves 2-1/2 to 6-inch Flanged Iron Body
Flowrite VF 599 Series Two-Way Valves 2-1/2 to 6-inch Flanged Iron Body VF 599-1 Description Features Application The Flowrite VF 599 series two-way valves are designed to work with either a pneumatic
Pneumatic and Electronic Motion Control Distributor AIROYAL COMPANY airoyalcompany.net Ph: Fax:
COMPANY Pneumatic and Electronic Motion Control Distributor AIROYAL COMPANY airoyalcompany.net Ph: 973-761-4150 Fax: 973-761-5731 Quick Valves Disconnect Table of Contents Index Table of Contents Ball
KEYSTONE SERIES GR RESILIENT SEATED BUTTERFLY VALVES GRW/GRL
KEYSTONE SERIES GR RESILIENT SETED BUTTERFLY VLVES GRW/GRL heavy duty industrial resilient seated butterfly valve GRW - Wafer body design GRL - Lugged body design FETURES GENERL PPLICTION Water, air, dry
BASIC FRAME AND COVERS
BSIC FRME ND COVERS ITEM DESCRIPTION VILTER PRT # S 101 Frame 3&4 34086 101 Frame 5&6 34087 101 Frame 7&8 34088 105 Cylinder Cover (no water) 320 Model ll 32648 105 Cylinder Cover (w/water) 320 Model ll
Approved. Size L H. 3" (76mm) 9-1/2" (241mm) 5-51/64" (147mm) 46. 4" (102mm) 11-1/2" (292mm) 6-45/64" (170mm) 81
pproved. Model: SD-NRV200CV Flanged Ends The Flanged End Check Valves are made of Iron Body, Bolted Bonnet and Horizontal Swing, painted with standard color. Epoxy coated inside and outside to WW C550
Evans SS-G & GXL -Series Integrated Stainless Gas Sticks
SS-G & GXL -Series Integrated Stainless Gas Sticks Features G & GXL Series 316SS CF8M Body Construction Cleaned and packaged in cleanroom 2-PC Design G-series allows for isolation and removal of regulator
Flowrite VF 599 Series Two-Way Valves 2-1/2 to 6-inch Flanged Iron Body
Flowrite VF 599 Series Two-Way Valves 2-1/2 to 6-inch Flanged Iron Body VF 599-1 VF114R1 VF115R1 Description Features Application The Flowrite VF 599 series two-way valves are designed to work with either
W91/W94 Series TEMPERATURE REGULATORS. Self-Operated Temperature Regulators. Design & Operation W91 Non-Indicating W94 Dial Thermometer
Design & Operation W91 Non-Indicating W94 Dial Thermometer Watson McDaniel reserves the right to change the designs and/or materials of its products without notice. 2010 Watson McDaniel Company CAPILLARY
Erie VT/VS PopTop Series Two Position Spring Return Valves
Erie VT/VS PopTop Series Two Position Spring Return Valves General & High Close-Off PopTop Zone Valves General Instructions pplication Erie PopTop Series valve bodies and actuators provide easy installation
VA, VF, and VS Series Direct Mounted Globe Valve Assemblies. Application. Features
TAC 1354 Clifford Avenue P.O. Box 2940 Loves Park, Illinois 61132-2940 www.invensysibs.com Two-Way and Three-Way Globe Valve Assemblies with 220 lbf Linear (979 N) Spring Return DuraDrive Actuators Submittal
VACUUM AND CHARGING HOSES
VACUUM AND HOSES RECOVERY YELLOW JACKET HVAC&R VACUUM SUPEREVAC AND HOSES YELLOW JACKET PLUS II Charging Hoses Double barrier protection for CFC, HCFC and HFC refrigerants 20 EDITION 62 CATALOG RECOVERY
Shut-off valves in stainless steel Types SVA-S SS and SVA-L SS
Data sheet Shut-off valves in stainless steel s SVA-S SS and SVA-L SS In certain specific areas such as outdoor applications and corrosive atmospheres, such as coastal installations, there is a need for
9 Shaft type N = Metric, to DIN/ISO 3019, Part 2 and VDMA 24560, Part 1 Y = SAE models P*B5 to 15 only. Omit for 20 thru 90 models
Model Codes P *** -(F)-(M) * *(F)(X) (*)-** -**-(C)-(G)-(L)- ** -**** 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 1 F V asic models = Fixed displacement type = Variable displacement type 2 Displacement PF and
ANSUL. Vertical and Horizontal Bladder Tanks
NSUL SYSTEM OMPONENTS U.S..G. PPROVL NO. 162.033/14/0 REV. 0 UL EX-3933 7-1-94 Page 2-59 Vertical and Horizontal ladder Tanks PPLITION The nsul bladder tank is one component in a balanced pressure proportioning
PANCAKE AND HOT DOG AIR COMPRESSORS PARTS LIST
PANCAKE AND HOT DOG AIR COMPRESSORS MODEL H330/H331 PARTS LIST COPYRIGHT APRIL, 2003 BY GRIZZLY INDUSTRIAL, INC. WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN
Cast Iron Valves. JIS 5K/10K, Class 125
Valves JIS K/K, Class STNDRD PRODUCTION RNGE Valve Type Nominal Pressure Fig. No. Construction (Note) Page Gate valves JIS K JIS K JIS K JIS K JIS K K Class Class Class Class FCM FCL FCLS FCLU FCWI FCHI
Flowrite VF 599 Series Two-Way Valves 2-1/2 to 6-inch Flanged Iron Body
Flowrite VF 599 Series Two-Way Valves 2-1/2 to 6-inch Flanged Iron Body VF 599-1 Description Features Application The Flowrite VF 599 series two-way valves are designed to work with either a pneumatic