concord price list guide and range year guarantee extended roofline, cladding, window boards, window trims PVC ROOFLINE Fax Order Line:

Transcription

1 concord 20 guarantee extended year price list and range guide NEW profiles inside 20 roofline, cladding, window boards, window trims year guarantee extended year guarantee white year guarantee colours BBA BBA 02/302 02/388 colourfast recyclable roofline cladding quality Fax Order Line: effective 4th June, 2012 (Issue 6) ISO 001 BSI certified kitemarked 1

2 accreditation FM 0180 Concord cellular PVC-u profiles are designed and manufactured to stringent quality control standards in accordance with ISO 001/2 14. BS 761 Licence No. KM33730 Concord cellular profiles have been tested and achieve the requirements stipulated for cellular PVC-u in BS.761 which encompasses composition, weather resistance, colour fastness, surface finish, impact and fire performance. APPROVAL INSPECTION TESTING CERTIFICATION CLADDING CERTIFICATE No 02/388 ROOFLINE CERTIFICATE No 02/302 Concord roofline and cladding systems are covered by BBA Certificate No s 02/302 and 02/388 respectively. EMS The BSI Environmental Management System accreditation (BS EN ISO 14001) demonstrates the Company's commitment to comply with environmental laws and regulations and to continuously improve its environmental management systems 20 year guarantee extended roofline, cladding, window boards, window trims year guarantee white year guarantee colours BBA BBA ISO /302 02/388 colourfast recyclable roofline cladding quality BSI certified kitemarked 2

3 concord Concord now has a leading 20 Year Extended Guarantee for its range of white cellular PVC fascias, soffits and claddings. The Concord 20 Year Extended Guarantee applies when Concord white cellular PVC roofline profiles are installed on a property with either a Swish or Kayflow white rainwater system. In order to offer this guarantee, installers must be registered at Qualifying guarantees can also be registered at the same site*. Concord Standard Guarantees 20 The Concord standard guarantee for white cellular PVC profiles is 15 years and the Guarantee for colour and foiled profiles is 10 Years. year guarantee extended *For full terms and conditions please see the Concord Extended Guarantee at 3

4 Colour Pack Price Price/ Code Description Qty Mtr ( ) Lgth ( ) Square Fascia (20mm) JWF mm Standard Fascia (D/E) W JWF5 5mm Standard Fascia (D/E) W JWF mm Standard Fascia W JWF mm Standard Fascia W JWF mm Standard Fascia W JWF mm Standard Fascia W JWF mm Standard Fascia W Square Fascia (16mm) CSF mm Square Fascia (D/E) W CSF mm Square Fascia (D/E) W CSF5 5mm Square Fascia (D/E) W CSF mm Square Fascia W CSF mm Square Fascia W CSF mm Square Fascia W CSF mm Square Fascia W CSF mm Square Fascia W CSF mm Square Fascia W (Also available in Anthracite & Grey - see page 14 for details) Prime Fascia (16mm) FWB mm Bullnose Fascia (D/E) W FWB mm Bullnose Fascia (D/E) W FWB5 5mm Bullnose Fascia (D/E) W FWB mm Bullnose Fascia W FWB mm Bullnose Fascia W FWB mm Bullnose Fascia W FWB mm Bullnose Fascia W FWB mm Bullnose Fascia W Ogee Fascia (16mm) COF mm Ogee Fascia (D/E) W COF5 5mm Ogee Fascia (D/E) W COF mm Ogee Fascia W COF mm Ogee Fascia W COF mm Ogee Fascia W COF mm Ogee Fascia W COF mm Ogee Fascia W Flat Fascia (16mm) CFF mm Flat Fascia (D/E) W CFF mm Flat Fascia W CFF mm Flat Fascia W CFF mm Flat Fascia W CFF mm Flat Fascia W CFF mm Flat Fascia W W = White 4

5 All prices are exclusive of VAT concord Note: Mahogany, Light Oak, Rosewood and Black woodgrain foiled versions of this profile are also available. For further details see Page

6 Square Fascia/Cover (mm) depth measured internally Colour Pack Price/ Price/ Code Description Qty Mtr ( ) Lgth ( ) SFN55 55mm Square Fascia/Cover W SFN30 30mm Square Fascia/Cover W SFN mm Square Fascia/Cover (D/E) W SFN20 20mm Square Fascia/Cover W/J SFN mm Square Fascia/Cover W/J SFN mm Square Fascia/Cover W SFN mm Square Fascia/Cover W/J SFN mm Square Fascia/Cover W SFN10 10mm Square Fascia/Cover W/J SFN mm Square Fascia/Cover W SFN mm Square Fascia/Cover W/J SFN mm Square Fascia/Cover W SFN mm Square Fascia/Cover W/J SFN00 0mm Square Fascia/Cover W Ogee Fascia (mm) depth measured externally CK mm Ogee Fascia (D/E) W CK mm Ogee Fascia W CK mm Ogee Fascia W CK mm Ogee Fascia W CK mm Ogee Fascia W CK mm Ogee Fascia W Fascia/Cover (7mm) depth measured externally PC x 7mm Fascia (D/E) W PC4 4 x 7mm Fascia (D/E) W PC x 7mm Fascia W PC x 7mm Fascia W PC x 7mm Fascia W PC x 7mm Fascia W PC x 7mm Fascia W mm and 300mm End Caps also available, see page 10. Ogee Fascia (7mm) depth measured externally PG x 7mm Ogee Fascia (D/E) W PG x 7mm Ogee Fascia W PG x 7mm Ogee Fascia W PG x 7mm Ogee Fascia W PG x 7mm Ogee Fascia W PG x 7mm Ogee Fascia W W = White 6 J = Bright White

7 All prices are exclusive of VAT concord Note: Mahogany, Light Oak, Rosewood and Black woodgrain foiled versions of this profile are also available. For further details see Page

8 Decorative Elements Colour Pack Price/ Price/ Code Description Qty Mtr ( ) Lgth ( ) Decorative Bargeboards (16mm) DBVEX1 Convex (165mm min/225mm max) W DBCAV1 Concave (160mm min/225mm max) W Colour Size Pack Price/ Code Description (mm) Qty Pk ( ) DGF1 Gable Finial W Fascia/Soffit Trims Colour Pack Price/ Price/ Code Description Qty Mtr ( ) Lgth ( ) SMC100 Soffit to wall trim W SMT1001 Soffit Joint W CT038 Felt Roof Edge Trim W Soffit Ventilators SVS mm Fascia/Soffit Ventilator (1) W SVT mm Fascia/Soffit Ventilator (2) W SVT mm Fascia/Soffit Ventilator (2) A NOTES: (1) 10mm Airflow (2) 25mm Airflow. Over Fascia Protection/Ventilation C502 Fascia Protection (2.5m) Z C404 Vented Eaves Protector (1m) Z C405 Bird Comb (for C404Z) (1m) Z C403 Sealing Tape (10m Roll) Z C504 Over Fascia Ventilator -10mm (1m) Z C505 Over Fascia Ventilator -25mm (1m) Z W = White A/Z = Black 8

9 All prices are exclusive of VAT concord 165 Convex 160 Concave DGF SMC100 SMT1001 CT SVS5000 SVT C502Z C504Z and C505Z C404Z and C405Z

10 Corners and Joints Colour Size Pack Price/ Code Description (mm) Qty Pk ( ) CRJ Square Fascia Joint W/J CRC Square 0 Fascia Corner W/J CSJ Square Face-fix Joint W CFJ Flat Face-fix Joint* W CSC Square 0 Face-fix Corner W CSI Square 0 Internal Corner W PWC300 Prime 0 Corner (Bullnose) W PWT300 Prime Joint (Bullnose) W CBJ Prime Joint (Bullnose) W CBC Prime 0 Corner (Bullnose) W CBI Prime 0 Internal Corner (Bullnose)* W CKJ Ogee Joint W CKC Ogee 0 Corner W COJ Ogee 16mm Joint W COC Ogee 0 Corner W COI Ogee 0 Internal Corner * W º Ogee/Square Corners CXB 1º External Corner W CNB 1º Internal Corner W Suitable for 7mm boards only PCC450 Square 0 Corner W PCC0 Square 0 Corner W PCT450 Square Joint W PCT0 Square Joint W PGC450 Ogee 0 Ext. Corner W PGC230 Ogee Internal Corner W PGT450 Ogee Joint W PGT225 Ogee 45 Barge Joint W CEC7 100mm Cover Board End Cap W CEC10 * 300mm Cover Board End Cap W * Not illustrated W = White J = Bright White * Not illustrated 10

11 All prices are exclusive of VAT concord CRJ CRC PWT300 PWC300 CKJ CKC CSJ CSC CSI CBJ CBC COJ COC CXB CNB PCC0 or PCC450 PCT0 or PCT PGC450 PGC230 PGT450 PGT225 CEC7 11

12 Soffit/Multi-Purpose Boards (mm) Colour Pack Price/ Price/ Code Description Qty Mtr ( ) Lgth ( ) SM mm Soffit W SM mm Soffit W SM mm Soffit W SM mm Soffit W/J SM mm Soffit W/J SM mm Soffit W/J SM mm Soffit W/J SM mm Soffit W/J SM mm Soffit W/J SM mm Soffit W/J SM mm Soffit W SM100F 100mm Soffit (2 finished edges) W Hollow Soffit Profiles H mm Hollow Soffit W H mm Hollow Soffit W H mm Hollow Soffit W HST Hollow Soffit Edge Trim W HJT Hollow Soffit Joint W J mm Hollow Soffit W J mm Hollow Sofft A/B J mm Hollow Soffit W JST Hollow Soffit Starter A/B JJT Hollow Soffit Joint A/B Vented Soffit (mm) - 10mm Air Gap SM605V 605mm Pre-Vented Soffit W SM450V 450mm Pre-Vented Soffit W SM405V 405mm Pre-Vented Soffit W SM300V 300mm Pre-Vented Soffit W SM250V 250mm Pre-Vented Soffit W SM225V 225mm Pre-Vented Soffit W SM200V 200mm Pre-Vented Soffit W SM175V 175mm Pre-Vented Soffit W SM150V 150mm Pre-Vented Soffit W Vented Soffit (mm) - 25mm Air Gap SN450V 450mm Pre-Vented Soffit W SN300V 300mm Pre-Vented Soffit W SN225V 225mm Pre-Vented Soffit W SN150V 150mm Pre-Vented Soffit W W = White J = Bright White A = Black B = Brown 12

13 All prices are exclusive of VAT concord SM300G HST H300 HJT H250 H100 J300 JST JJT J100 13

14 ANTHRACITE & GREY (co-extruded) Roofline Profiles` Colour Pack Price/ Price/ Code Description Qty Mtr ( ) Lgth ( ) Square Fascia (16mm) CSF mm x 16mm Fascia (D/E) A/E/T/G CSF5 5mm x 16mm Fascia (D/E) A/E/T/G CSF mm x 16mm Fascia A/E/T/G CSF mm x 16mm Fascia A/E/T/G CSF mm x 16mm Fascia A/E/T/G CSF mm x 16mmm Fascia A/E/T/G CSF mm x 16mm Fascia A/E/T/G Fascia/Cover (mm) NEW SFN mm Square Fascia/Cover (D/E) A/E/T/G SFN mm Square Fascia/Cover A/E/T/G SFN mm Square Fascia/Cover A/E/T/G SFN mm Square Fascia/Cover A/E/T/G CK mm Ogee Fascia/Cover (D/E) A CK mm Ogee Fascia/Cover A CK mm Ogee Fascia/Cover A CK mm Ogee Fascia/Cover A CK mm Ogee Fascia/Cover A CK mm Ogee Fascia/Cover A Soffit/Multi-Purpose Boards (mm) SM mm x mm Flat Board G SM mm x mm Flat Board A/E/T/G SM mm x mm Flat Board A/E/T/G SM mm x mm Flat Board A/E/T/G SM mm x mm Flat Board A/E/T/G SMT1001 Soffit Joint Trim A/E/T/G SVT mm Soffit Ventilator A Corners & Joints Price/ Pk ( ) CSJ Square Face-Fix Joint (500mm) A/E/T/G CSC Square Face-Fix Corner (500mm) A/E/T/G CSI Square Internal Corner (500mm) A/E/T/G CRJ Square Fascia Joint (300mm) A/E/T/G CRC Square Fascia Corner (300mm) A/E/T/G CKC Ogee Fascia Corner (300mm) A CKJ Ogee Fascia Joint (300mm) A COC Ogee Fascia Corner (500mm) A COI Ogee Fascia Internal Corner (500mm) * A A = Black E = Light Grey T = Hazy Grey G = Gale Grey * Not illustrated 14

15 All prices are exclusive of VAT concord SMT SVT5000 CRJ CRC CKC CKJ CSJ CSC CSI COC 15

16 Cladding System Colour Pack Price/ Price/ Code Description Qty sq.m( ) Lgth ( ) CS mm Shiplap W CS mm Shiplap W CS mm Shiplap (twin plank) W CV mm Open V W CV mm Open V W CF mm Featheredge W NOTE: Mahogany, Light Oak and Rosewood foiled cladding profiles are also available. For further details see Page 24. Cladding Trims Colour Pack Price Price/ Code Description Qty Mtr ( ) Lgth ( ) CT026 Universal Channel W CT040 Universal Channel + Cover W CT20 2-Part Universal Trim (Male) W CT21 2-Part Universal Trim (Female) W CT030 External Corner Trim W CT22 2-Part Corner Trim (Male) W CT24 2- Part Corner Trim (Female) W CT027 Universal Starter W CT028 Wall Starter W CT02 Drip Starter W CT0 Drip Trim W CT033 Centre Joint W CT051 2-Part Joint (Male) W CT052 2-Part Joint (Female) W Colour Pack Price/ Code Description Qty Pack ( ) CJ mm Shiplap Joint W CJ mm Shiplap Joint W CJ mm Shiplap Joint W CJ mm Open V Joint W CJ mm Open V Joint W CJ mm Featheredge Joint W Fixings White Colours Code Description ( ) ( ) C083 65mm Plastic Headed Nails (BX 100) W/E/T C082 50mm Plastic Headed Nails (BX 100) W/Z C081 40mm Plastic Headed Pins (BX 250) W/E/T C080 30mm Plastic Headed Pins (BX 250) W C204 30mm Fixing Pins (BX 250) S C203 25mm Fixing Pins (BX 250 S C083 and C081 are also available in Mahogany, Light Oak and Irish Oak. Please add the appropriate colour code when ordering W = White S= Stainless Steel E = Light Grey T = Hazy Grey Z = Black 16

17 All prices are exclusive of VAT concord Shiplap Open V CT20 Feather Edge CT026 CT040 CT22W CT21 CT030 CT24 CT027 CT028 CT051 CT02 CT0 CT033 CT052 Shiplap (twin) Shiplap Joint Open V Joint Feather Edge Joint C083 C082 C081 C080 C204 C203 17

18 Prime Window Boards (16mm) Colour Pack Price/ Price/ Code Description Qty Mtr ( ) Lgth ( ) FWB mm Bullnose Fascia (D/E) W FWB mm Bullnose Fascia (D/E) W FWB5 5mm Bullnose Fascia (D/E) W FWB mm Bullnose Fascia W FWB mm Bullnose Fascia W FWB mm Bullnose Fascia W FWB mm Bullnose Fascia W FWB mm Bullnose Fascia W End Cap Price/Pack CEC300W10 Prime End cap (300mm) W 10 pairs Bullnose Window Boards (mm) Colour Pack Price/ Price/ Code Description Qty Mtr ( ) Lgth ( ) BNW mm Bullnose Window Board W BNW mm Bullnose Window Board W BNW mm Bullnose Window Board W BNW mm Bullnose Window Board W BNW mm Bullnose Window Board W BNW mm Bullnose Window Board W BNW mm Bullnose Window Board W End Caps Price/Pack CEC4W10 Long B/N End Cap (300mm) W CEC5W05 B/N End Cap (1mm) W Reveal/Cover (mm) Colour Pack Price/ Price/ Code Description Qty Mtr ( ) Lgth ( ) SFN55 55mm Square Fascia/Cover W SFN30 30mm Square Fascia/Cover W SFN mm Square Fascia/Cover (D/E) W SFN20 20mm Square Fascia/Cover W/J SFN mm Square Fascia/Cover W/J SFN mm Square Fascia/Cover W SFN mm Square Fascia/Cover W/J SFN mm Square Fascia/Cover W SFN10 10mm Square Fascia/Cover W/J SFN mm Square Fascia/Cover W SFN mm Square Fascia/Cover W/J SFN mm Square Fascia/Cover W SFN mm Square Fascia/Cover W/J SFN00 0mm Square Fascia/Cover W End Caps Price/Pack CEC8W20 Cover Board End Cap (50mm) W CECW10 Long Cover Board End Cap (300mm) W/J W = White 18 J = Bright White

19 All prices are exclusive of VAT concord CEC CEC CEC CEC8 CEC NOTE: 7mm Cover Board (see Page 6) can also be used as a window board along with End Caps CEC7W10 and CEC10W10. 1

20 Window Trims Colour Pack Price/ Price/ Code Description Qty Mtr ( ) Lgth ( ) ST45 Flexible strip W ST75 Flexible strip W SW60 mm Channel W RQ12 12mm Quadrant W/J RQ mm Quadrant W/J RQ20 20 x 15mm Bead W RS14 15 x 13mm Rectangle W/J RS25 25 x 20mm Rectangle W/J RS26 26 x 6mm Batten W RM22 Scotia Mould W RL020 20mm Edge Mould W/J RA025 25mm x 25mm Angle W RA050 50mm x 50mm Angle W SA x 100mm Hollow Angle W/J RL025 25mm Dee Mould W/J RL028 28mm Dee Mould (flat-backed) W RE028 28mm Edge Trim W RL050 50mm Dee Mould W RL075 75mm Dee Mould W Skirting and Architraves 6mm Skirting/Architrave (Flat Backed) RT045 45mm Architrave W/J RT070 70mm Skirting W/J RT05 5mm Skirting W/J mm Skirting/Architrave (Castellated) RC045 45mm Architrave W/J RC070 70mm Skirting W/J RC05 5mm Skirting W/J mm Architrave/Skirting RP0 mm Architrave W RP050 50mm Architrave/Skirting W RP075 75mm Architrave/Skirting W RP mm Architrave/Skirting W RP mm Skirting W mm Architrave/Skirting RP045 45mm Architrave W RP070 70mm Skirting W RP05 5mm Ogee Skirting W Decorative Profiles SD70 Classic Architrave W SP120 Classic Architrave W W = White J = Bright White 20

21 All prices are exclusive of VAT concord ST45 ST75 11 SW60 26 RS RL RQ12 RQ17 RQ20 RS14 RS RM22 RA025 RA050 SA RL025 6 RL RE RL RL RT RT070 RT05 6 RC045 6 RC070 6 RC RP0 7.5 RP RP RP RP RP RP RP05 10 SP SD70 21

22 Foiled Profiles Roofline Std Pack Price Price Price Price Code Description Length Qty (M) (C) (R) (Q) REPLACEMENT FASCIA (16mm) CSF mm Square Fascia (D/E) 5m CSF mm Square Fascia 5m CSF mm Square Fascia 5m CSF mm Square Fascia 5m CSF mm Square Fascia 5m CSF mm Square Fascia 5m TUDOR BOARD (20mm FLAT - no soffit groove) JTF mm Flat Fascia 5m SOFFIT (mm FLAT) SM mm x mm Soffit 5m SM mm x mm Soffit 5m SM mm x mm Soffit 5m SM mm x mm Soffit 5m SM mm x mm Soffit 5m SM mm x mm Soffit 5m SM mm x mm Soffit 5m HOLLOW SOFFIT H mm Hollow Soffit 5m HST Hollow Soffit Edge Trim 5m HJT Hollow Soffit Joint Trim 5m SOFFIT (mm VENTED) SM405V 405mm Vented Soffit 5m SM300V 300mm Vented Soffit 5m SM225V 225mm Vented Soffit 5m SM175V 175mm Vented Soffit 5m SM150V 150mm Vented Soffit 5m JOINTS AND CORNERS SMT1001 Soffit Joint 5m DGF1 Gable Finial 340mm CAJ Fascia Joint 300mm CAC 0 Fascia Corner 300mm CSJ Square Face-Fix Joint 500mm CSC 0 Face-Fix Corner 500mm CSI Square Internal Corner 500mm M = Mahogany C = Light Oak R = Rosewood Q = Irish Oak K = White D = Cream Z = Black X = Gale Grey** ** Please note that Gale Grey Foil is know in the PVC window market as Anthracite Grey (RAL 7016 Renolit ).. 22

23 All prices are exclusive of VAT concord Price Price (Z) (X) SMT DGF1 CAJ CAC CSJ CSC CSI 23

24 Cladding Std Pack Price Price Price Price Code Description Length Qty (M) (C) (R) (Q) CS mm Shiplap Cladding 5m CV mm Open V 5m CLADDING TRIMS FOILED CT026 Universal Channel 5m CT051 2-Part Joint (M)* 5m CT20 2-Part Universal Trim (M)* 5m CT23 2-Part Corner Trim (F)* 5m CLADDING TRIMS PLAIN Pack Price/ Price/ Code Description Qty Pk Pk (A) (B) CT027 A/B Starter Trim (plain) 5m CT065 A/B 60 x15mm Vent (plain) 5m SVT5000 A 25mm Ventilator (plain) 5m NOTE: M = Male, F = Female * Top section of 2-Part Trims. Lower part shown on page 16 Pack Price/ Price/ Price/ Price/ Code Description Qty Pk Pk Pk Pk (M) (C) (R) (Q) CJ mm Shiplap Joint Cover CJ mm Open V Joint Cover Window Boards & Reveal Liners Std Pack Price Price Price Price Code Description Length Qty (M) (C) (R) (Q) BNW mm B/N Window Board 5m BNW mm B/N Window Board 5m BNW mm B/N Window Board 5m SFN mm Cover Board (D/E) 5m SFN mm Cover Board 5m SFN mm Cover Board 5m SFN mm Cover Board 5m SFN mm Cover Board 5m SFN mm Cover Board 5m SFN mm Cover Board 5m End Caps Std Pack Price/ Price/ Price/ Price/ Code Description Length Qty Pk Pk Pk Pk (M) (C) (R) (Q) CEC5 B/N Window Board E.Cap 1mm CEC6 B/N Window Board E.Cap 300mm CEC8 Cover Board End Cap 50mm CEC2 Cover Board End Cap 300mm A = Black (not foiled) B = Brown (not foiled)* M = Mahogany C = Light Oak R = Rosewood D = Cream Z = Black X = Gale Grey** * For use with Mahogany & Rosewood profiles ** See page 26 for colour description. 24

25 All prices are exclusive of VAT concord Price Price (Z) (X) CS150 CV100 CT051 (CT052 - White) CT20 (CT21 - White) (CT22 - White) CT23 CT026 CT CT065B 56 SVT5000A Price/ Pk (Z) Price/ Pk (X) CJ043 CJ281 Price (Z) Price (X) CEC6 Price/ Pk (K) Price/ Pk (D) CEC CEC8 Q = Irish Oak K = White CEC2 25

26 Internal Trims Std Pack Price Price Price Price Code Description Length Qty (M) (C) (R) (Q) RQ12 12mm Quadrant 5m RQ17 17mm Quadrant 5m RQ20 20 x 15mm Bead 5m RS26 26 x 6mm Batten 5m RS14 15 x 13mm Rectangle 5m RS25 25 x 20mm Rectangle* 5m RA x 25mm Angle 5m RA x 50mm Angle 5m SA x 80mm Hollow Angle 5m Skirtings & Architraves 7.5mm SYSTEM RP050 50mm Architrave 5m RP075 75mm Skirting 5m RP mm Skirting 5m mm SYSTEM RL025 25mm D Section 5m RE028 28mm Edge Trim 5m RL020 20mm Edge Section 5m RT045 45mm Architrave 5m RT070 70mm Skirting 5m RT05 5mm Skirting 5m * Not Illustrated M = Mahogany C = Light Oak R = Rosewood Q = Irish Oak K = White D = Cream Z = Black X = Gale Grey** L = Chartwell Green ** Please note that Gale Grey Foil is know in the PVC window market as Anthracite Grey (RAL 7016 Renolit ).. 26

27 All prices are exclusive of VAT concord Price Price Price Price Price (K) (D) (Z) (X) (L) RQ12 RQ RS RS26W RQ20 25 RA RA SA RP050 RP075 RP RL020 RL RE RT045 RT RT05 27

28 Important Information Access Systems SAFETY FIRST! Never attempt to access the work area with an unsupported ladder or without a stable deck. Always use a full scaffold platform or a purpose made cantilevered deck system with guard rails in place. Health and Safety Full health and Safety information is available on request. Storage & Handling Load and unload by hand and support both ends of a 5m length when handling. Stack no higher than 1m, in packing sleeve on a flat base. Avoid contact with solvents, paint, creosote, bitumen etc. Cutting/Shaping Use conventional carpentry tools including fine toothed saws. Power tools may be run at speeds appropriate for timber. Nail and screw holes do not require pre-drilling. Fascia Boards Summit Sumo, S16 boards and foiled boards are able to support the weight of the lower row of tiles without the need for a tilt fillet or kick plate. Fixings Swish A4 grade stainless steel plastic headed nails or capped screws Roofline Fixing Code Size Qty Max Centres Sumo/S16 Nail C083 65mm 2 Screw C072 50mm 2 mm Cover Nail C082 50mm 2 Boards Screw C071 40mm 2 Flat Nail C081 40mm 2 Boards Screw C071 40mm 2 Cladding White* Nail C204 33mm 1 Foiled* Nail C204 33mm 1 400mm White 600mm Foiled 400mm 600mm to 2 storeys 400mm 3-5 storeys * Ensure plank ends are always nailed and that adequate ventilaton is provided behind all foiled cladding installations (see reverse of Foiled Product Guarantee for details) 28

29 concord Expansion Gaps Always leave a minimum 4mm expansion gap at the end of each board, ie where two boards meet leave 8mm overall. Sealants Use a low modulus silicone (BS 588 Type A). Use a primer when bonding to GRP, stainless steel, aluminium or untreated wood. Do not use with polycarbonate sheet. Asbestos By law all asbestos materials must be removed by trained operatives under strictly controlled conditions. If you suspect that asbestos is present you should consult your Local Authority. Ventilation IMPORTANT - Roof voids must be ventilated in order to stop warm air condensing on cold surfaces. Condensation encourages rot and mould growth. Foiled cladding installations can suffer from expansion and contraction due to heat absorption, therefore it is important to provide a free air path between vertical battens. Continuity of this ventilation path can be achieved by venting into the eaves or by leaving a 10mm air gap between the cladding and soffit. Duo-Pitched Roof (greater than 15 pitch but less than 70) Insulation should not interrupt free flow of air 10mm Cross ventilation at eaves level Duo-Pitched Roof (greater than 15 pitch) 5mm Ceiling following the plane of the roof 5mm Mono-Pitched Roof (greater than 15 pitch but less than 70) Insulation should not interrupt free flow of air 10mm 5mm 25mm 50mm Flat Roof (less than 15 pitch) 25mm Cross ventilation at eaves level 25mm 2

30 Preparation Checklist Use proper access equipment (p28). Inspect for asbestos (p2). Push back the lower rows of tiles. Remove enough gutter, fascia, and soffit for one day s A work only. Inspect rafters/laths and replace rotted timbers. H Set up fixing points at maximum centres: white 600mm, foiled 400mm. Make sure ventilation is sufficient (p2). E Sequence of Work A. Cut back rotted felt to a clean edge. B. Fit suitable timber hangers (preservative treated) to support soffit boards. Screw hangers to rafter sides checking for level. Deep soffits must be nailed up every 200mm max across their depth. Set up support at hipped corners. C. Set up string lines to check vertical/horizontal faces of rafter feet and hangers for straight and level. D. Nail soffit board to hanger. Inner edge of soffit abuts to wall or sits on bricks. Outer edge of soffit should over hang by 10mm to fit groove in back of fascia board. E. Nail fascia board to rafter feet (check fixings p28) with sufficient height to create tile kick. F. Make soffit and fascia joints between rafters. G Fit a dpc material under the existing felt. New material must dress into the gutter. H. Fit gutter brackets directly to replacement fascias of 16mm and above, in accordance with manufacturer s recommendations. APPROVAL Ensure correct fall in the gutter towards INSPECTION TESTING CERTIFICATION ROOFLINE CERTIFICATE No 02/302 the down pipe. I. Box end construction. See p32. Notes for Over Capping 1. Check the expansion gaps and fixing centres detailed on page 28/2. 2. All over-capped timber must be sound. 3. The exsiting timber fascia must support the weight of tiles and the guttering. G 30

31 concord B D C I F Joints First board Matching joint moulding nailed to end of first board Next board push fit into joint profile 8 mm Butt joints using matching joint moulding Soffit board joint using C041 push-fit trim B Support blocks at hipped corners Shaped blocks applied to both sides of rafter Fascia ends screwed to blocks Shaped blocks applied to both sides of rafter Joint cover Fascia ends screwed to blocks Joint cover 31

32 Box End Construction A. Finish fascia level with the face of the rafter gable. Soffit should over hang by 10mm and may be cut square or mitred. Note: Timber hangers should be installed as required to locate box end structure. B. Measure and cut box end from a deep board. Front edge should tilt up to match height of fascia board. C. Measure and cut fascia to form the return to gable wall. D. Remove section from corner joint to fit around rafter. E. Fix bargeboard directly to gable rafter. D APPROVAL INSPECTION TESTING CERTIFICATION ROOFLINE CERTIFICATE No 02/302 B E A C Box End Construction Options 32

33 Window Boards & Trims concord General Fix to dry, sound timber or masonry with a general purpose adhesive, where necessary, using stainless steel plastic headed screws or nails. Do not fix to damp surfaces. If there is any risk of damp after fixing, use a low modulus silicone. Rotten or damaged timber should be replaced before over capping. On irregular surfaces use packing pieces where needed. A. Window board; choice of: 16mm Bullnose (replacement unit) mm Bullnose Window Board (capping) mm Reveal/Cover Board (capping) B. End cap, cut to suit C. Choice of Trims (See P20) 12mm Quadrant featured PQ012 (P20) D. mm Reveal Liner (Flat Board or Cover Board) (P14 and 15) E. Architrave Trims (See P20) F. Skirting Profiles (See P20) C D B E A F 33

34 Cladding Installation Sequence of Work A. Perimeter frame battens (recommended 25 x 38mm) B. Battens around openings. C. Intermediate vertical battens. D. Starter trims (or bottom angle ventilation strip, as appropriate, see inset illustrations). E. Vertical perimeter trims, corner trims (where two-part trims are used, fix only the inner part). F. Top perimeter trims (These engage inside the vertical trims). G. Packings to battens as required for any cut planks. H. Plank profiles and joint covers or centre joint trims as appropriate (see p 16). I. Outer components of two-part trims. Note: For maximum fixing centres see p 28. A E D Starter Trims I 34

35 concord F E Trim Options B F C Stainless steel pins locate panels E H H Joint Options G Packing for Cut Planks

36 The information contained in this price list is correct at time of publication. Changes will be made from time to time, therefore, purchasers should verify whether changes have taken place since the issue of this price list. concord Your Local Concord Stockist Pioneer House, Mariner, Lichfield Road Ind. Estate, Tamworth, Staffordshire, B7 7TF t: (01827) f: (01827) A344 0/2015