Bell Housing. RC series bell housing. Transmission Engineering. Hydraulic-Components. Oil-coolers
|
|
|
- Oswald Webb
- 5 years ago
- Views:
Transcription
1 Bell Housing RC series bell housing 1. It is used for the connection of IEC standard motors and pumps or NEMA standard motors and pumps. 2. The motor shaft and pump shaft are designed as self-aligning, and the dimensions are made in line with the VDMA standard. It could be used in heavy loads. 3. The material for the bell housing could be chose from aluminum alloy, cast iron and nylon. By pressure casting with high medium and low pressure, it is made. Using flow forming and spraying forming technology, the products would present a feature of light weight, compact interior structure, high strength and good heat dissipation capability. 4. Embedded shock absorption or external shock absorption is optional. 1
2 Model selection explanation: Example: R C / / / D F / * * * R C VDMA standard bell housing (Motor) 250 Flange-Ф D F With damping bell housing -- Without damping flange DF Used for RC damping flange DF350 Used for RC400 (above) damping DV400 flange DF Bell housing total length Refer to the following chart Pump connection end XXX Pump installation X code * * * Optional internal code ZF Pump end flange MZF Motor end flange ZR Pump end central flange MB Observation hole LB Drain hole Permissible loads undertook for damping bell housing Permissible loads under the condition of 60 working temperature Damping bell housing Damping flange RC 250 RC 300 RC 350 DV 400 DF 401/1N DF 401/1H Center distance L (mm) Permissible load F (N) Under other L x, for the calculation of the permissible F zul, please refer to the following formula: F zul. [N]=F [N] F( L [mm]/l x [mm] -1) The maximum permissible working temperature is +80, and the moment permissible working temperature could be
3 Rigid RC bell housing Integrated shock absorption bell housing Figure 3: Manufactured in line with the VDMA24561 standard. Figure 4: Manufactured in line with the VDMA24561, no fastening screws is needed. RC.../.../... RC.../.../.../DF Enlarged view 3
4 4
![Bell housing model type Motor specification Power [kw] Shaft diameter D L [mm] Bracket model type D1 D2 D3 D4 d1 d2 d3 L L1 F G G1 H2 RC 160/80/... 71 0.](/docs-images/88/117503936/images/5-0.jpg "25 14X30 PTFL160 160 130 110 110 21 107-80 13 4 9 M8 8.5 RC 160/90/... 0.37 90 RC 200/100/... 80 0.55-0.75 19X40 PTFL200 200 165 130 145 36 129-100 16 5 11 M10 12.5 RC 200/110/... 90 S+L 1.1-1.")
5 Bell housing model type Motor specification Power [kw] Shaft diameter D L [mm] Bracket model type D1 D2 D3 D4 d1 d2 d3 L L1 F G G1 H2 RC 160/80/ X30 PTFL M8 8.5 RC 160/90/ RC 200/100/ X40 PTFL M RC 200/110/ S+L X RC 200/118/ RC 200/124/ RC 200/140/ RC 250/120/ L 2,2-3 28X60 PTFL M RC 250/124/ M 4 PTFS RC 250/128/ RC 250/135/ RC 250/148/ RC 250/175/ RC 300/144/ S X80 PTFL M12 18 RC 300/150/ M 7.5 PTFS RC 300/155/ RC 300/168/ RC 300/196/ RC 350/188/ M+L X110 PTFS M16 18 RC 350/204/ M+L 18, X RC 350/228/ RC 350/256/ Rigid RC bell housing Split type shock absorption bell housing 5
6 Enlarged view 6
7 Bell housing model type Motor specification Power [kw] Shaft diameter D L [mm] Bracket model type D 1 D 2 D 3 D 4 d 1 min d 1 min d 2 d 3 L L 1 F G G 1 H 2 RC 400/204/ L 30 55X110 PTFS M16 22 RC 400/228/... (DF350) 262 (DF350) 228 RC 400/256/ RC 450/234/ S 37 60X140 PTFS (DV400) 301 (DV400) M16 20 RC 450/262/ M RC 450/285/... (DF400) 276 (DF400) 285 RC 450/315/ RC 550/248/ M 55 65X140 PTFS M16 20 RC 550/265/ S+M X RC 550/275/ RC 550/295/ RC 550/315/ RC 660/310/ S+M+L X170 PTS M20 20 RC 660/330/ RC 660/345/ RC 800/315/ L X M20 35 RC 800/335/ L X RC 800/350/ RC 800/443/
8 Bell housings used exclusively for gear pumps 1. It is used for the connection of IEC standard motors and gear pumps, NEMA standard motors and gear pumps. 2. The motor shaft and pump shaft are self-centering design. The size is manufactured in line with VDMA24561 standard, and it could be used in heavy load conditions. 3. Material: aluminum alloy, cast iron or nylon 4. Embedded or external flange type shock absorption is optional. 8
9 Model selection Example: R C / / / B 1 4 / Z F V R C Bell housing specification (Motor) 160 Flange Ф B 1 4 Flange size -- IM B 35 B 1 4 IM B Bell housing total length Refer to the sheet Pump connection end Pump installation xxx code Z F V Optional internal code ZFV Pump end central flange MZF Motor end central flange ZR Central flange MB With observation hole LB With drain hole Motor end Pump end 9
10 Motor flange Ф160mm [motor specification 71] Dimension [mm] Pump Model type connection method D 1 D 2 D 3 D 4 d 1 d 2 L L 1 F G G 1 G 2 M M 1 M 2 RC160/70/401 Fig M8 2XM RC160/70/468 Fig XM RC160/80/401 Fig XM RC160/80/401/B14 32 M9 RC160/80/448/ZFV* Fig M8 4XM RC160/80/448/B14/ZFV* 25.4 M9 RC160/80/453/B14/ZFV* RC160/90/401 Fig M8 2XM RC160/90/401/B14 32 M9 RC160/90/448/ZFV* Fig M8 4XM RC160/90/448/B14/ZFV* 25.4 M RC160/90/453/B14/ZFV* RC160/95/441/B14/ZFV* XM RC100/95/446/B14/ZFV* RC160/105/446/B14BZFV* RC160/110/4456/B14/ZFV* RC160/1/446/B14/ZFV* Motor flange Ф200mm [motor specification 80, 90 S+L] Dimension [mm] Pump Model type connection method D1 D 2 D 3 D 4 d 1 d 2 L L 1 F G G 1 G 2 M M 1 M 2 RC200/80/401 Fig M10 2xM RC200/80/448 Fig xM RC200/80/ RC200/80/468 Fig XM RC200/80/493 Fig XM
11 RC200/90/401 Fig XM RC200/90/448 Fig XM RC200/90/ RC200/90/468 Fig XM RC200/90/493 Fig XM RC200/96/439/ZFV* XM RC200/96/441/ZFV* 80 4XM RC200/96/446/ZFV* RC200/96/459/ZFV* XM6 RC200/100/ XM RC200/100/ RC200/100/ RC200/100/ RC200/106/ XM RC200/106/ XM RC200/106/ RC200/106/ XM6 RC200/110/ XM RC200/110/ Motor flange Ф250mm [motor specification 100L, 120M] Dimension [mm] Pump Model type connection method D1 D 2 D 3 D 4 d 1 d 2 L L 1 F G G 1 G 2 M M 1 M 2 RC250/110/401 Fig M12 2XM RC250/110/ RC250/110/439 2XM RC250/110/441 Fig XM RC250/110/ RC250/110/ XM RC250/110/ RC250/110/ RC250/110/462 4XM8 RC250/110/ XM RC250/110/ XM RC250/116/401 Fig XM
12 RC250/116/ RC250/116/439 2XM RC250/116/441 Fig XM RC250/116/ RC250/116/ XM RC250/116/ RC250/116/ RC250/116/462 4XM8 RC250/116/ XM RC250/116/ XM RC250/120/404 Fig XM RC250/120/ RC250/124/ RC250/124/ Motor flange Ф300mm [motor specification 132S+M] Dimension [mm] Pump Model type connection method D1 D 2 D 3 D 4 d 1 d 2 L L 1 F G G 1 G 2 M M 1 M 2 RC300/130/405 Fig M12 2XM RC300/130/ XM RC300/130/441 Fig XM RC300/130/ RC300/130/459 4XM6 RC300/130/499 Fig XM RC300/144/425 Fig XM RC300/144/ XM RC300/144/447 4XM RC300/144/465 4XM RC300/162/403/ZFV* RC300/162/419/ZFV* 60 4XM RC300/162/423/ZFV* 85 4XM RC300/162/426/ZFV* 80 4XM RC300/162/427/ZFV* RC300/162/442/ZFV* 105 4XM RC300/162/443/ZFV* 60 4XM
13 RC300/162/444/ZFV* XM RC300/162/449/ZFV* RC300/162/451/ZFV* XM RC300/162/475/ZFV* 160 4XM Motor flange Ф350mm [motor specification 160M+L, 180M+L] Dimension [mm] Pump Model type connection method D1 D 2 D 3 D 4 d 1 d 2 L L 1 F G G 1 G 2 M M 1 M 2 RC350/173/404 Fig M16 2xM RC350/173/ RC350/173/417 Fig XM RC350/173/439 Fig XM RC350/173/441 Fig XM RC350/173/ XM RC350/173/ RC350/173/ XM RC350/173/ RC350/173/459 Fig XM RC350/176/499 Fig XM RC350/205/403/ZFV* 125 4XM RC350/205/419/ZFV* 60 4XM RC350/205/423/ZFV* 85 4XM RC350/205/426/ZFV* 80 4XM RC350/205/427/ZFV* RC350/205/442/ZFV* 105 4XM RC350/205/443/ZFV* 60 4XM RC350/205/444/ZFV* XM RC350/205/449/ZFV*
14 Motor flange Ф400mm [motor specification 200L] Dimension [mm] Pump Model type connection method D1 D 2 D 3 D 4 d 1 d 2 L L 1 F G G 1 G 2 M M 1 M 2 RC400/168/441 Fig M16 4XM RC400/168/ RC400/168/ XM RC400/196/ XM RC400/196/ XM RC400/198/ XM RC400/196/ XM RC400/196/447 4XM RC400/196/ XM RC400/196/ Chart 1: The relation graph for the noise and pressure of the bell housing vane pump Chart 2: The relation graph for the noise and pressure of the bell housing gear pump 14
15 KPC series air-cool bell housing 1. It is used for the connection for IEC standard motors and hydraulic pumps, NEMA standard motors and hydraulic pumps. 2. The motor shaft and pump shaft are self-align design, and the sizes are set according to the VDMA24561 standard. Combined with standard frame. It could be used in heavy load conditions. 3. Aluminum alloy material, die-cast formation, light weight, compact structure, high strength, good heat dissipation capability 4. Circulating cooling, no extra wind flooding equipment needed, and easy installation and good for environment protection 5. Test Pressure: The standard static pressure:26 bar Maximum pressure could reach 40 bar (according to DIN50104 standard) Working pressure: 16 bar ( at the condition of 60, 2Hz, 0-16 bar, re-circulation test 200 times) 6. Embedded shock absorption available 15
16 Model selection Example: K P C / / / D D F K P C Bell housing model kw KPC kw KPC kw KPC kw KPC350 Axial length of the bell housing KPC KPC KPC Technical data KPC Working pressure Load frequency Maximum static pressure 16 bar , f=2 Hz 40 bar Model type Cooling power Motor power(kw) Air mass flow Fan input power Noise label Cooling power/motor power p[kw] t=40k n=1500 1/min(1) [m³/h] [w] [db(a)] [%] kpc kpc kpc kpc Note: The above table shows the relation for KPC series air cool bell housing and the matched motors. * The rated rotation speed of the drive device is 1500 r/min, for other speed, please contact us. 16
17 * The rotation direction of the pump is clockwise (seen from the pump end). Cooling power Oil flow Q (l/min) Size diagram Lateral outlet is available 17
18 Bell housing bracket (optional) Model type PTFS bracket PTFL bracket A A1 B B1 B2 H A A1 B B1 B2 H KPC KPC KPC KPC Model type Motor specification Motor power (kw) Axial diameter (mm) L L1 L2 L3 A2 A4 A5 A6 B3 H1 D1 D2 D3 D4 D5 M G KPC X * G1/ S+L X KPC L X G3/ M KPC S+M X G3/ KPC M+L 11 42X G3/ M+L X Note: Only with transition flange or damping rings, vertical installation is permissible. 18
19 PTFL (light) bell housing bracket PTFS (heavy) bell housing bracket 1. Light weight and compact structure 2. Applicable for horizontal or vertical installation 19
20 Model type B B1 B2 B3 B4 L L1 L2 L3 L4 L5 L6 H H1 H2 H3 H4 R R1 S d d1 L L8 parallelis m (mm) perpendiculari ty(mm) PTFL 160 PTFL 200 PTFL 250 FTFL PTFS PTFS 300 PTFS 350 PTFS 400 PTFS 450 PTFS 550 PTFS Benefit of installing the bell housing brackets 1. Suitable for motors that has no bottom mounting bracket( such as slowdown motor). 2. It is more convenient for changing motors 3. The hydraulic pump for oil tubes could be installed at first at the condition of no motors installed 4. No extra brackets needed 20
Cooler Bellhousing KPV series
Cooler Bellhousing KPV series» Dimensions acc. to VDMA 24 561» Rigid and noise damping versions in identical lengths» Easy replacement of rigid/dampened bellhousing acc. to VDMA 24 561» Optional combination
LVElectric Motors Basics
LVElectric Motors Basics Selection of electric motors has to be made using 3 different categories : By its electric design. By its mechanical design. By its insulation system The most important features
General Purpose Cast Iron Motors
General Purpose Cast Iron Motors Totally enclosed squirrel cage three phase low voltage motors, Sizes 71-355, 0.25 to 250 kw www.abb.com/motors&drives > Motors > Low voltage motors > General purpose motors
Energy Saving Three Phase Motors
e-drive Energy Saving Three Phase Motors IEC frames 56 to 400 Outputs 0.09 to 630 IE2 MEPS2006 Type: AHE Aluminium Motors Type: HE Cast-Iron Motors 1 When you need all the features of a premium quality
Ordering information. When placing an order, specify motor type, size and product code according to the following example.
Ordering information When placing an order, specify motor type, size and product code according to the following example. Example Motor type M3AA 112 MB Pole number 4 Mounting arrangement (IM-code) IM
Cast Iron Frame Motors For Zone 21 Improved Efficiency EFF2
Motors Energy Automation Coatings Cast Iron Frame Motors For Zone 21 Improved Efficiency EFF2 Standard Features: Three-phase, multivoltage, IP66, TEFC : 0.12 up to 250kW Frames: 63 up to 355M/L Voltage:
Cooling Systems FLKS - 3S/1.0/W... FLKS - 3L/1.0/W DESCRIPTION
Cooling Systems FLKS - S/1.0/W... FLKS - L/1.0/W... 1. DESCRIPTION 1.1. APPLICATIONS Cooling circuits: Cooling of AC main drives Cooling of motor spindles on machining centres Cooling of transmission and
Drive IT Low Voltage Cast Iron Motors. M2000 Range
Drive IT Low Voltage Cast Iron Motors M2000 Range Making you more competitive ABB has been manufacturing motors for over 100 years. Our products are designed to be reliable, efficient and cost effective,
Bell Housings with Rigid / Flexible Pump Mounting PTS / PT
Bell Housings with Rigid / Flexible Pump Mounting PTS / PT 1. Description 1.1. General Bell housings are connection elements between drive motors and hydraulic pumps. Both connecting flanges are supplied
Low Voltage General Purpose Motors
Low Voltage General Purpose Motors Making you more competitive ABB s General purpose motor is designed for use in general industry, meeting the demands of standard applications for OEM's. Motors are readily
Lowara. Centrifugal Electric Pumps Manufactured in AISI 316 Stainless Steel in Compliance with EN 733. SH Series. 60 Hz
Centrifugal Electric Pumps Manufactured in AISI 316 Stainless Steel in Compliance with EN 733 SH Series 60 Hz SERIE SH HYDRAULIC PERFORMANCE RANGE AT 60 Hz WEB 10-2006 2 CONTENTS 5 Specifications... 6
Aluminium Frame Motors Improved Efficiency EFF2
Motors Energy Automation Coatings Aluminium Frame Motors Improved Efficiency EFF2 Standard Features: Three-phase, multivoltage, IP55, TEFC : 0.12 up to 11kW Frames: 63 up to 132M Voltage: 220-240/380-415V
Filter-cooler circulation circuit with in-line filter according to DIN 24550
Filter-cooler circulation circuit with in-line filter according to DIN 0 RE 01/0.0 1/10 Type ABUKG Component series 1X with: circulation pump type PGF or type PVV el. motor, frame sizes 0 to 13 low-pressure
Low-Voltage Motors. Catalog M
Low-Voltage Motors atalog M asic design ast-iron enclosure Energy-saving motor to EMEP Improved Efficiency eff, degree of protection IP, temperature class F, -pole, Hz Selection and ordering data Rated
IEC Low Voltage Induction Motors 400 V 50 Hz. Motors for all applications
IEC Low Voltage Induction Motors 400 V 50 Hz Motors for all applications Making you more competitive BB has been manufacturing motors for over 100 years. Our products are designed to be reliable, effi
A B C D, E, F M2BA 112 MB 3GBA ADB, 122, 451, etc
Ordering information When placing an order, please state the following minimum data in the order, as in the example. The product code of the motor is composed in accordance with the following example.
M3000 Motors for Hazardous Areas. Low Voltage Non-sparking Motors Ex na, EEx na
M3000 Motors for Hazardous Areas Low Voltage Non-sparking Motors Ex na, EEx na Non-sparking EEx na, Ex na, Ex N Range Standards Frame Size Output range Non-sparking Ex na IEC 60079-15 aluminium 90-250
General performance IE3 cast iron motors in frame sizes 71 to 355
PRODUCT NOTE General performance IE3 cast iron motors in frame sizes 71 to 355 General performance IE3 motors are ideal for OEMs to build into pumps and fans, as well as for other applications including
Performance Plus: Spiral Bevel Series
Performance Plus: Spiral Bevel Series GAM Perfomance Plus Miniature Spiral Bevel Gearboxes The VP Series Performance Plus Miniature Bevel Gearboxes pack high performance in a small package with the highest
Rotron MIL-80 Tubeaxial Fans
Rotron MIL-8 Tubeaxial Fans General Tubeaxial Information Tubeaxial Fans are integrated axial flow air moving devices in which the motor rotor is cast inside the impeller to achieve the smallest possible
Low Voltage Induction Motors
Low Voltage Induction Motors Catalogue-2009/04 E TAC-C CAST IRON Frame Size 71->355 0,18-315 kw t-telectric.com Technical features TAC-C motors are designed and manufactured according to IEC34, IEC72,
Feed Pumps VP / VPB / VPBM
Feed Pumps VP / VPB / VPBM Symbol General The feed pumps from the VP series are low-noise, single-stroke vane pumps with constant flow rate. Using a damped bell housing (PT) enables noise levels to be
Hydraulic Components. Bellhousings Damping elements Oil tanks.
Hydraulic Components Bellhousings Damping elements Oil tanks www.ktr.com STANDING THE PRESSURE: HYDRAULIC COMPONENTS BY KTR The power of hydraulics has moved mountains since the 1960s. Since the rapid
Hydraulic components: Bellhousings and accessories Damping elements Tanks Thermomanagement. Components Steel Tanks. Hydraulic
components: Bellhousings and accessories Damping elements Tanks Thermomanagement Steel Tanks 179 Table of contents NEW NEW NEW components 179 Overview 181 Bellhousings Bellhousings according to VDMA 24561
IEC Low Voltage Induction Motors 400 V 50 Hz. Motors for all applications
IEC Low Voltage Induction Motors 400 V 50 Hz Motors for all applications Making you more competitive ABB has been manufacturing motors for over 100 years. Our products are designed to be reliable, effi
ACG7. Std Line. Product Description. Max differential pressure: 16 bar Circulation, lubrication and transfer ACG GB
ACG7 Std Line Product Description Flow volume: 80-1200 l/min Max differential pressure: 16 bar Applications: Circulation, lubrication and transfer 1. Applications 1.1 Functionality The Std Line (standard)
Catalog. Low voltage General performance IE2 high efficiency motors according to EU MEPS
Catalog Low voltage General performance IE2 high efficiency motors according to EU MEPS We provide motors, generators and mechanical power transmission products, services and expertise to save energy and
Power Units / Systems
Vickers Power Units / Systems Integrated Motor Pump MP, MP22, MP45, MP75 & MP92 kw, 20 hp to 92 kw, 125 hp This edition of the Integrated Motor Pump brochure includes the following pump series: Piston
MAJAX-2 GENERAL SPECIFICATION
MAJAX-2 GENERAL SPECIFICATION Majax-2 axial flow fans are manufactured in diameters ranging from 315mm to 2000mm (available in 2250mm on request), and incorporate manually adjustable pitch aluminium bladed
Feed Pumps Direct Drive Series 1.1.
1.1. FEED PUMP SERIES FZP AND MFZP 1. GENERAL The feed pump, type FZP, is a direct drive vane pump with constant flow rate. It is available with flanged motor (MFZP) and comes with internal pressure relief
Data sheet. Etaline GN /1852 G10 Version no.: 1 Inline pump. Operating data. Design. Requested developed head m
Data sheet Item no.: 2600 Page: 1 / 5 Operating data Requested flow rate 40.00 m ³/h Actual flow rate 40.00 m ³/h Requested developed head 68.00 m Actual developed head 68.00 m Pumped medium Water Efficiency
Design features of models K and AC brakes. K DC-Powered Brake. AC Three phase Powered Brake
NEMA C-Face spring applied fail-safe brakes model K and AC mounted brakes with NEMA 2 housing are designed specifically to interchange with Stearns and Dings models as shown in Table1. Design features
180VC WITH B5 FLANGE / M ,6 0, / M l 5,0 0,7 192 / M ,0 0,9 223
METRIC (IEC) FRAME THYRISTOR RATED DC METRIC (IEC) FRAME MOTORS IP54 These metric dimensioned motors are built to IEC 34-1 electrical and mechanical standards. The IEC 63 and smaller frames are stocked
Brake Motors Aluminium Frame Improved Efficiency EFF2
Motors Energy Automation Coatings Brake Motors Aluminium Frame Improved Efficiency EFF2 Standard Features: Three-phase, multivoltage, IP55, TEFC Output: 0.12 up to 11kW Frames: 63 up to 132M Voltage: 220-240/380-415V
ANNEX No 1. C 17/05/2006 SGA112B TERMINAL BOX ARRANGEMENT Ex e, Ex na &Ex td V (OPTION 2)
ANNEX No 1 DRAWINGS Drawing No. Drawing Description Revision Date Ex e, na and td SGA100A General Arrangement for SGA 71 frame motor C 16/06/2006 SGA101A General Arrangement for SGA 80-132 frame motor
3D SERIES. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS Page - SPECIFICATIONS 0 SELECTION CHART 1 TYPE KEY 3 PERFORMANCE CURVE SPECIFICATIONS 4 PERFORMANCE CURVE 32-125 5 PERFORMANCE CURVE 32-6 PERFORMANCE CURVE 32-0 7 PERFORMANCE CURVE 40-125 8 PERFORMANCE
Screwpump. Series D GB. General Description. Model Code D 4
Screwpump Series D4 A Member of the COLFAX PUMP GROUP Handling of hydraulic oils, seal oils and fuel oils Max. working pressure: 160 bar Flow range: 10-850 I/min General Description Positive constant displacement,
Hydraulic components: Bellhousings and accessories Damping elements Tanks Thermomanagement. Components Steel Tanks. Hydraulic
components: Bellhousings and accessories Damping elements Tanks Thermomanagement Steel Tanks 181 Table of contents components 181 Overview 183 Bellhousings Bellhousings according to VDMA 24561 design A
Explanation of AR Series Ventilator Products. Fan type code D S AR AE
Series Axial Fan Explanation of Series Ventilator Products Fan type code 450-7 /26 D -2 F400 Smoke Extract Fan 400 C, 300 C Number of Poles D S Three Phase Single Phase AE AE Features and construction
Vane Air Motors - P1V-B
Vane Air Motors - P1V-B These large motors are designed for use in the most arduous applications, requiring considerable power, torque, robustness and reliability Operating information Working pressure:
Screw Pumps Series EMTEC HIGH-TECH FOR EMULSION. 20 DQ axial branch with pipe thread. 140 D8.6 radial branch with SAE flange
Screw Pumps 20 DQ axial branch with pipe thread HIGH-TECH FOR EMULSION 140 D8.6 radial branch with SAE flange Application For handling good, medium or mal-lubricating, abrasive fluids in cooling lubricant
Aerofoil Ventilation Fans. Fantek. Quality & Performance at Affordable Prices
Aerofoil Ventilation Fans Quality & Performance at Affordable Prices GENERAL FEATURES, located in Chennai strives to deliver quality products at affordable costs to all its customers. Our company s vision
ROBATIC ROBA -quick ROBA -takt. Reliable coupling and braking.
Reliable coupling and braking Equipment Technology Packaging Machinery Conveyors and Materials Handling Equipment Door drives Indexing tables ROBATIC ROBA -quick ROBA -takt www.mayr.de Electromagnetic
FLSD (E) Atmospheres containing explosive GAS totally enclosed three-phase asynchronous motors General information
(E) Atmospheres containing explosive GAS General information Flameproof totally enclosed three-phase asynchronous motors, FLSD (E) series, according to IEC 60034, 60038, 60072, 60079-0 and 60079-1, EN
High-voltage motors TOSHIBA MITSUBISHI-ELECTRIC INDUSTRIAL SYSTEMS CORPORATION
High-voltage motors series TOSHIBA MITSUBISHI-ELECTRIC INDUSTRIAL SYSTEMS CORPORATION series : Combining over 00 years experience with innovative new technology makes the series the right choice for the
Immersion Pumps PS and PSL ( Slurp Pump ) sealless
Immersion Pumps PS and PSL ( Slurp Pump ) sealless 1-6014-US Centrifugal pumps of metal for clean, polluted and viscous fluids Technical data Delivery rate Q max = 1250 l/min Delivery head H max = 105
CENTRIFLOW 3D WITH AC MOTOR >> Technical catalogue
CENTRIFLOW 3D plug fan WITH AC MOTOR >> Technical catalogue air comfort Centriflow 3D 2 GMEB CentriFlow 3D - Technical Catalogue Contents GENERAL Description and survey chart Application... 3 General Survey
Catalog. Low voltage Industrial performance motors
Catalog Low voltage Industrial performance motors We provide motors and generators, services and expertise to save energy and improve customers processes over the total lifecycle of our products, and beyond.
Feed Pumps Direct Drive Series 1.1.
1.1. FEED PUMP SERIES FZP AND MFZP 1. GENERAL The feed pump, type FZP, is a direct drive vane pump with constant flow rate. It is available with flanged motor (MFZP) and comes with internal pressure relief
Gerotor pump, fixed displacement volume
Gerotor pump, fixed displacement volume RE 10545/12.11 1/12 Type GZ Component series 1X Maximum operating pressure 15 bar Maximum displacement 140 cm³ H7572_d Table of contents Contents age eatures 1 Ordering
6400 RPM. All aluminum components finished with a chemical Weight: approximately 0.74 lbs.
Rotron MIL-8 Tubeaxial Fans General Tubeaxial Information Tubeaxial Fans are integrated axial flow air moving devices in which the motor rotor is cast inside the impeller to achieve the smallest possible
THE INNOVATIVE TEAM IN POWER TRANSMISSION
S m a l l WONDER THE INNOVATIVE TEAM IN POWER TRANSMISSION 2 1 2 The output shaft is constructed from quality C40 steel for maximum output torque. The corrosion-resistant aluminum surface cools easily
1LG0 Low-voltage Motors
Low-voltage motors up to 315kW Catalog D81.5.1 1LG Low-voltage Motors Answers for industry. 1 Table of Contents Overview 3 Motor standards 5 Mechanical design 6 Electrical design 1 Converter fed application
LPE3. Std Line. Product Description. Max differential pressure: 16 bar Circulation, lubrication and transfer LPE GB
LPE3 Std Line Product Description Flow volume: 10-180 l/min Max differential pressure: 16 bar Applications: Circulation, lubrication and transfer 1. Applications 1.1 Functionality The Std Line (standard)
LPE4. OptiLine. Product Description. Max differential pressure: 16 bar LPE GB
LPE4 OptiLine Product Description Flow volume: 8-175 l/min Max differential pressure: 16 bar Applications: Circulation and transfer 1. Applications 1.1 Functionality The LPE OptiLine pump is used for a
SPUR GEAR PRODUCT LINE: CAST IRON PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE. Section 1451 Page 1451.
Page 1451.1 TABLE OF CONTENTS Features & Benefits...2 Typical Applications...2 Port Location Options...2 Model Number Key...3 Standard Materials of Construction...3 Cutaway View & Pump Features...4 Component
Lowara. Centrifugal electric pumps made of AISI 316 stainless steel in compliance with EN 733. SH Series. 50 Hz
Centrifugal electric pumps made of AISI 316 stainless steel in compliance with EN 733 SH Series 50 Hz SERIE SH OPERATING CHARACTERISTICS AT 50 Hz PRINT 05-2007 2 CONTENTS 5 Specifications......................................................................
ODP SERIES PREMIUM INDUSTRIAL OPEN DRIP PROOF MOTORS C280M to C355LB Frame. Australian Version October 2013
ODP SERIES PREMIUM INDUSTRIAL OPEN DRIP PROOF MOTORS C280M to C355LB Frame Australian Version October 2013 ODP SERIES (OPEN DRIP PROOF) PREMIUM INDUSTRIAL OPEN DRIP PROOF MOTORS, C280M TO C355LB FRAME
CPLS Asynchronous motors for variable frequency. 95 Nm to 2900 Nm
95 Nm to 2900 Nm Introduction The range of IP23 protection CPLS asynchronous motors was designed for fixed and variable speed applications when there is little space available or (and) there is a wide
MMD 4 Poles. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 203 PERFORMANCE CURVE MMD4 32-250 205 PERFORMANCE CURVE MMD4 40-250 206 PERFORMANCE CURVE MMD4 50-250 207 PERFORMANCE
3D SERIES. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS Page SPECIFICATIONS 0 SELECTION CHART 1 TYPE KEY 3 PERFORMANCE CURVE SPECIFICATIONS 4 MEI INDEX SPECIFICATIONS 5 PERFORMANCE CURVE 32 6 PERFORMANCE CURVE 32 7 PERFORMANCE CURVE 320 8 PERFORMANCE
Catalog Mars Low voltage Brake motors
Catalog Mars 2014 Low voltage Brake motors We provide motors, generators and mechanical power transmission products, services and expertise to save energy and improve customers processes over the total
Piston Compressors. Volume range: l/min
Piston Compressors Volume range: 235 10900 l/min Intelligence, innovation, reliability variable modular system operationally reliable low speeds long operating life of valves low noise emission robust
Accessories smart additions for efficiency and intelligent performance
smart additions for efficiency and intelligent performance Metal bellows couplings Perfectionists you can count on Metal bellows couplings are designed for the highest requirements in servo drive technology.
D-series 1D90V/W. 1D90V/W kw AN AIR COOLED ONE CYLINDER DIESEL ENGINE WITH VERTICAL SHAFT
D-series S 1D90V/W 5.8-11.2 kw AN AIR COOLED ONE CYLINDER DIESEL ENGINE WITH VERTICAL SHAFT 1D90V/W 5 1D90V/ W Design Aircooled single-cylinder four stroke Diesel engines. Horizontal cylinder. Crankcase
Oil/air cooler BLK ATEX-3GD
FluidControl Oil/air cooler BLK ATEX-3GD Drives and hydraulic aggregates are also used in explosive areas in machine construction or raw material production. In hydraulic systems oil transfers power and
ELECTRIC MOTORS. Selection. Starting torque and nominal torque
SELECTION PROCEDURE The output powers published overleaf are based upon continuous maximum rating conditions. Therefore design factors for above average running periods do not normally affect the selection.these
MVSI-TS. Split covers. Technical features
MVSI-TS Split covers The MVSI-TS series, obtained directly from the MVSI series, is characterized by the split weight covers. The weight cover is divided into two halves that can be removed in a radial
MVSI. Technical features
MVSI The MVSI series represents the line of reference products for manufacturer s of vibrating machines and plants operating in many industrial sectors and is made up of the largest range on the market,
CENTRIFLOW 3D WITH AC MOTOR >> Technical catalouge
CENTRIFLOW 3D plug fan WITH AC MOTOR >> Technical catalouge air comfort Centriflow 3D 2 GMEB CentriFlow 3D - Technical Catalouge Contents GENERAL Description and survey chart Application... 3 General Survey
SHAFT MOUNT REDUCERS. For Additional Models of Shaft Mount Reducers See Sections F & J G-1
SHAFT MOUNT REDUCERS PowerTorque Features and Description... -2 Nomenclature... -4 Selection Instructions... -5 Selection By Horsepower... -7 Mechanical Ratings... -12 Dimensions... -14 Accessories...
CENTRIFUGAL PUMPS according to DIN standard
CENTRIFUGAL PUMPS according to DIN 2255 standard End suction centrifugal pumps in accordance with DIN 2255 made of cast iron, applications in water boosting, heating system, airconditioning, washing systems
IP66 GSW GEAR BOX MOTOR SERIES
IP66 GSW GEAR BOX MOTOR SERIES Three Phase Aluminium Gear Box Motors Australian Version October 2013 CONTENTS INTRODUCTION Pg 3 MATERIALS AND CONSTRUCTION Pg 3-4 SERIES OVERVIEW Pg 5 PERFORMANCE DATA Pg
kythe Premium Pump for Air and Gas Applications
. kythe Premium Pump for Air and Gas Applications LKHSP Self-priming Centrifugal Pump Application The LKHSP self-priming centrifugal pump is specially designed for pumping liquids containing air or gas
ELECTRIC MOTORS 3SIE IE3
EECTRIC MOTORS 3SIE IE3 TECHNIC INFORMTION TYE 3SIE IE3 Construction 3SIE have a stator house in aluminum from frame 80-112. End shields are in aluminum in frame 80-100 and in cast iron from frame 112.
Low Voltage Smoke Venting Motors
Low Voltage Smoke Venting Motors New motor range for smoke venting applications Many solutions for fi re protection require smoke-venting fans to move the smoke gases out into the open air. Dual-purpose
Data sheet. Etaline GN /3002 G11 Version no.: 1 Inline pump. Operating data. Design. Clean water. Efficiency 61.6 % 20.0 C.
Data sheet Item no.: 1900 Page: 1 / 5 Operating data Pumped medium Water Actual flow rate 72.19 m ³/h Operating data determined for maximum inlet pressure Actual developed head 70.26 m Clean water Efficiency
DC MOTORS NEMA FRAME SCR RATED
NEMA FRAME SCR RATED NEMA FRAME MOTORS SCR RATED High voltage permanent magnet DC motors are typically used with an SCR (thyristor) controller in applications requiring adjustable speed and constant torque
Contents. Identification
Contents Identification Type key Product data Introduction Applications Features and benefits Performance range pole pole Construction Sectional drawing Construction features Test pressure Operating conditions
Page - CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL DIMENSIONS AND WEIGHT 400 PUMP 400
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 65-250 204 PERFORMANCE CURVE 80-160 205 PERFORMANCE CURVE 80-200 206 PERFORMANCE CURVE 80-250
FONTECK INDUSTRIES Glasblazerstraat 12E, 2984 BL Ridderkerk, The Netherlands Tel: +31 (0) Fax: +31 (0)
Features: FONTECK INDUSTRIES AFBD AXIAL FAN (ATEX Certified, Gas Group IIB+H2) ATEX certified Comply with standard: EN 14986, EN13463 1 Driven directly by ATEX certified motor 15 sizes with case opening
GMP-Type. Key Features: Integrated Motor-Pump Units
Integrated Motor-Pump Units GMP-Type Key Features: Direct coupling between motor and pump Rotation: Right (viewed from shaft end) Electric motor mounting type: special B3-B14 (IEC 34-7) Rated Voltage:
SECTION AXIAL HVAC FANS
SECTION 233413 - AXIAL HVAC FANS 1. PART 1 GENERAL 1.1. RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
MVSS. Technical features
Technical features Power supply Three-phase voltage from 24V to 690V, 50Hz or 60Hz or 100-130V 60Hz and 200-240V, 50Hz; suitable for use with an inverter from 20Hz to the base frequency with constant torque
Flow volume: 2-24 l/min Max differential pressure: 10 bar Applications: Lubrication, circulation and transfer
Screw pump Series LPD Product description Flow volume: 2-24 l/min Max differential pressure: 10 bar Applications: Lubrication, circulation and transfer The LPD pump is used for a number of different fluids:
ATZAF DOUBLE INLET CENTRIFUGAL FANS WITH AIRFOIL BACKWARD CURVED BLADES
ATZAF DOUBLE INLET CENTRIFUGAL FANS WITH AIRFOIL BACKWARD CURVED BLADES COMEFRI USA: Manufacturing and Warehouse facilities in Hopkinsville, KY. Total facility: 125,000 sq.ft. Producing centrifugal fans
Low Voltage General Purpose Motors
Low Voltage General Purpose Motors Making you more competitive ABB s General purpose motor is designed for use in general industry, meeting the demands of standard applications for OEM's. Motors are readily
Data sheet. Omega B GB G F Version no.: 1. Operating data. Design. Driver, accessories. Clean water. Actual developed head 57.
Data sheet Item no.: 3700 Page: 1 / 5 Operating data Pumped medium Water Actual flow rate 415.38 m ³/h Clean water Actual developed head 57.81 m Not containing chemical and Efficiency 82.3 % mechanical
ARAGON MOTO R S. Three Phase Induction Motors
ARAGON MOTO R S Three Phase Induction Motors Introduction PEM series motors are defined as totally enclosed, fancooled, squirrel cage type and noted for their novel design, beautiful modelling, compact
Coolers. OK Series. Air Cooled Oil Coolers Hydraulic Symbol OK 1-11 OKF Cooling Systems Catalog. Applications
OK Series Air Cooled Oil Coolers Hydraulic Symbol OK 1-11 OKF 3-11 OKA 4-6 OKAF 4-6 OKA 8-11 OKAF 8-11 Description The OK Series cooler design uses a axial fan assembly which draws air through the cooler.
High-pressure pumps Series HP45
High-pressure pumps Series HP45 www.andritz.com/pumps General Description / Application Multi-stage high pressure pumps for water supply, irrigation and industrial applications, for hot and cold water
Centrifugal performance characteristics with axial flow pattern: RADAX VAR
High pressure in-line mixed-flow fans RADAX VAR Centrifugal performance characteristics with axial flow pattern: RADAX VAR COMPACT PRESSURE-RESISTANT UNIVERSAL In their compact casing, the RADAX VAR impellers
V Series AXIAL PISTON PUMP ORDER CODE
V Series AXIAL PISTON PUMP ORDER CODE V A 1 R B S - A D X A 1 Customers demand Pump Series V Links Type (only V -18): none - Standard A - SAE A bolts Ma. (cm 3 /n):, 18, 3,, 38, 4,, 7 Pump Control Type
.3 Section Vibration Isolation and Seismic Control..2 ANSI/AMCA 210/ASHRAE 51 Laboratory Methods of Testing Fans for Rating.
Issued 2005/06/01 Section 15831 Commercial Fans Page 1 of 6 PART 1 GENERAL 1.1 RELATED SECTIONS.1 Section 01355 Waste Management and Disposal..2 Section 15053 Motors, Drives and Guards..3 Section 15072
VALVES. V40/V41 Mini ISO Star Valves 2x3/2, 5/2 and 5/3, Solenoid and Pilot Actuated ISO / VDMA Size 18 mm
V40/V4 Mini ISO Star Valves x/, / and /, Solenoid and Actuated ISO 407- / VDMA 4 6 Size 8 mm Compact design and high performance Flexible Sub-base system True multipressure system Sandwich regulators and
LSPXMV FCR Atmospheres containing explosive dust FCR asynchronous brake motors. General information
General information GENERAL USE : U.G. Enclosed three-phase brake asynchronous motors, LSPXMV series with failsafe brake, according to IEC 6003, 60072, EN 50281. Single speed : 0.25 to 11, frame size from
Energy-saving motors (ESM)
Energy-saving motors (ESM) Technology Accessories EC-SYSTEMS ESM General information K series Q-motor EC axial EC axial fans A series fans Energy-saving motors (ESM) 316 Air performance curves 3 Energy-saving
MARATHON SLA SERIES CAST ALUMINIUM MULTI-MOUNT THREE PHASE MOTORS SIZES , KW
MARATHON SLA SERIES CAST ALUMINIUM MULTI-MOUNT THREE PHASE MOTORS SIZES 56-160, 0.09-18.5KW MARATHON SLA SERIES CAST ALUMINIUM MULTI-MOUNT THREE PHASE MOTORS SIZES 56-160, 0.09-18.5KW INTRODUCTION 3 Standards
Characteristics of model K brake
Characteristics of model K brake The brake model K is a spring applied d.c. brake. It has been designed to stop rotational movement of machine shaft. However the user has to ensure that the brake is in
Centrifugal Inline Fans Models SQ-M and BSQ-M. Direct and Belt Drive
Centrifugal Inline s Models SQ-M and BSQ-M Direct and Belt Drive July 2010 Centrifugal Inline Duct s Greenheck's model SQ-M and BSQ-M centrifugal square inline fans feature a unique combination of installation