CENTRIFLOW 3D WITH AC MOTOR >> Technical catalogue
|
|
- Clement Murphy
- 6 years ago
- Views:
Transcription
1 CENTRIFLOW 3D plug fan WITH AC MOTOR >> Technical catalogue air comfort Centriflow 3D
2 2 GMEB CentriFlow 3D - Technical Catalogue Contents GENERAL Description and survey chart Application... 3 General Survey Chart... 3 Quality and environment...4 Available versions...4 Design Description Fan impeller...4 bracket and base frame...4 Fan inlet... 5 Air Flow Sensor... 5 specification... 5 Fan specification... 5 Speed controllers, Operation panel, Cabling... 6 Specification of speed controllers...7 Technical Data Fan chart explanations... 8 Size Size Size Size Size Size Size Size Size Size Size Size Sound data...21 Accessories GMEZ-09 Inlet cone with 4 measurement nipples...27 GMEZ-13 Protective screen, inlet...27 GMEZ-21 Flexible connection, inlet...27 GMEZ-42 A/V mountings, rubber...27 GMEZ-43 A/V mountings, steel spring...27 GMEZ-60 Painted finish...27 GTLZ Centrimeter...28 PAN-08-0 Operation panel...28 Installation instructions Fan in Air Handlig Units...28 Wiring diagrams Wiring diagrams...29 Order codes Product code...30 Accesories...30
3 CentriFlow 3D - Technical Catalogue GMEB 3 General Description and survey chart Application The CentriFlow 3D plug fan range is a complete fan assembly to be used in Air Handling Units. The fan is available in 12 sizes and covers air flow up to 16 m 3 /s ( m 3 /h) and pressure rises up to 2500 Pa. The fan is equipped with standard IE2 or IE3 class AC-motors which are driven by a frequency converter using either 0-10 V input or the MODBUS-RTU interface for communication. The fan is ready to be used - plug and play - and all cabling is done between motor and drive. The new developed impeller is specially designed to work inside an Air Handling Unit to give the best performance for high total efficiency low sound levels at inlet and outlet easy to install and use lowest possible vibration levels General survey chart Static Pressure (Pa) (m 3 /h) (m 3 /s) Volume Flow
4 4 GMEB CentriFlow 3D - Technical Catalogue General and Design Description Quality and environment All components are designed and manufactured in accordance with applicable standards including the quality assurance system ISO 9001, the environmental management system ISO and the Energy Directive 2009/125/EC and all Directives related to CE-marking. GMEB fans with built-on drive are certified by TÜV according to class B1. Manufacturing tolerance is according to DIN class LK2. GMEB fans with customer s own VSD are not certified. Available versions In CentriFlow 3D GMEB the same impeller is available with a standard AC motor (IE2 or IE3 class) with different drive arrangements, see below. Please note that there is a limited range available for sizes 025 and 028. DESIGN DESCRIPTION Fan impeller The impeller is made of aluminium. The hollow section airfoil blades are made of extruded aluminium profile and are welded to impeller front and back plate. The leading edges of blades are inclined and the blades are backward curved. Number of blades is six (6). Built-on drive Hub Loose drive (not available for sizes 025 and 028) The hub is made of die casted aluminium in sizes and of steel in size is fastened to the hub using a keyway and a fastening screw, and additionally secured by an end bolt and washer. Without drive bracket and base frame The motor bracket is made of of galvanized sheet steel (sizes ) or of welded sheet steel and painted with 100 µm thick epoxy powder paint (sizes ). The base frame is made of galvanized sheet steel (sizes ) or hot dip galvanized steel (sizes ).
5 CentriFlow 3D - Technical Catalogue GMEB 5 Design Description Fan inlet The fan inlet is designed to optimize the flow into the impeller. The inlet is deep-drawn in one piece and made of galvanized sheet steel. Air flow sensor The inlet is equipped with an air flow sensor as standard. It is used for measuring the air flow through the impeller. As standard there are two measurement nipples and four measurement nipples are available as accessory. When a fan is in Air Handling Unit, the differential pressure Δp m shall be measured between the static pressures in the suction side plenum and air flow sensor. The air flow is calculated as a function of the measurement pressure difference Dp m with the coefficient k as a parameter by using the following formula: q v k Δp m q v = 1 Dp m k air flow (m³/s) coefficient of the fan measurement pressure difference CentriFlow 3D GMEB fans are supplied with -standard IE2 or IE3 motors. The motors are equipped with a thermistor as standard. s are designed to be used with a speed controller, which can be included in the delivery as loose or built-on. specification Admissable environmental temperature: from 15 C up to +40 C, with altitudes max 1000 m above sea level Mounting IM B3 Operating voltage 400 VAC Insulation class F, temperature rise class B Degree of protection IP 54 also with speed controller Thermistor included as standard. Fan Specification Fan data tested in accordance with ISO 5801 and ISO The complete fan is balanced to meet max vibration level 4,5 mm/s at maximum rotational frequency in accordance with ISO Impeller made of aluminium, hub of aluminium or steel -standard IE2 or IE3 motor Static construction made of galvanized sheet steel Number of blades 6 Permissible ambient temperature 10 C C Inlet equipped with air flow sensor to determine the airflow Direction of rotation clockwise, seen from the motor. k-values Fan size k-value
6 6 GMEB CentriFlow 3D - Technical Catalogue SPEED CONTROLLERS, OPERATION PANEL, CABLING Speed controller All GMEB fans using AC-motors shall be normally used with speed controller. Direct connection on mains is allowed but it needs to be checked if the motor power is big enough for connection directly to the mains. All fan-motor combinations are tested at the factory before the delivery. Loose speed controller can be mounted nearby the fan, e.g on the side panel of air handling unit. A screened cable of 3.5 m (sizes ) or 4.5 m (sizes ) is included in the delivery and connected on the motor side. Built-on arrangement is ready to be used and only requires power from mains and control signals. Specification for different speed controllers and wiring diagrams are to be found at the end of this catalogue. Loose speed controller is delivered with 3,5 m or 4,5 m long screened motor cable Please note: 1. If the speed controller is disconnected from the motor cable please remember to ground the shield 360 when rewiring. 2. If the motor cable needs to be replaced by a longer one the new cable must be of screened type. Please remember to ground the shield 360º when rewiring. 3. cable should be no longer than 20 m. Speed controller dimensions C B b ØD Operation panel Loose speed controller has operation panel as a standard. Built-on versions have optional operation panel. It can be mounted on the side panel of the air handling unit. Following actions can be made with operation panel: Read motor data like speed, frequency, current, voltage, operating hours etc. Handle alarms Drive motor manually a A size (kw) Height (mm) Width (mm) Depth (mm) Hole (mm) A a B b C ØD Weight (kg) 0, ,5 5,3 5,5-7, ,5 7, , ,5 13,8
7 CentriFlow 3D - Technical Catalogue GMEB 7 Specification of speed controllers Parameters Speed controller parameters are programmed at the factory providing an optimal performance of the given fan/motor combination. This includes motor parameters, ramp times, starting and stopping methods and speed limitations. If fixed speed operation is required, these speeds can be set in speed controller by an operation panel. Installation version Loose Built-on Mains supply (L1, L2, L3) Supply voltage V ±10% 400 V ±10% Supply frequency 50/60 Hz 50/60 Hz True Power Factor cos φ 0.9 nominal at rated load cos φ 0.9 nominal at rated load output (U, V, W) Output voltage 0-100% of supply voltage Output frequency 0-200/400 Hz Digital inputs: Digital inputs 4 2 Analog inputs: Number of analog inputs 2 1 Modes Voltage or current Voltage Voltage level 0 to to + 10 Current level 0/4 to 20 ma Analog output: Number of programmable analog outputs 2 0 Current range at analog output 0/4-20 ma 1 Digital output: Digital 2 1 Control card, 24 V DC output: Max. load 80 ma Relay outputs: Programmable relay outputs 2 2 Control card, 10 V DC output: Output voltage 10.5 V ±0.5 V 10.5 V +10 V Surroundings: Enclosure IP 54 IP 65 (1,5-3 kw)/ip 54 (4 kw -) Max. relative humidity 5% - 95% (non-condensing) during operation Ambient temperature Max. 40 C Max. 50 C Minimum ambient temperature during full-scale operation 0 C 40 C Fieldbus communication: Modbus RTU Built-in Built-in Physical layer RS-485 RS-485 Display Included HMI Fire protection 70 C/1h 70 C/1h
8 8 GMEB CentriFlow 3D - Technical Catalogue Fan chart explanations Symbols v p s (Pa) 2600 r/min 11 kw , , , , , ,5 a q v (m 3 /h) w u x b A c d % 92 z 89 db(a) y y B e 95 f 86 g u Air flow m 3 /s, m 3 /h v Fan static pressure w Fan max speed and motor nominal power with different motors x Indication of system curve for efficiency values 1) Pa r/min, kw a - f x Overall static efficiency at max r/min for each fan-motor combination 1) % y Border line for octave band correction z Total A-weighted sound power level at the discharge side, L WA 1) See table for each size. A,B db(a) q v (m 3 /s) u Sound data The total A-weighted sound power level L wa for the discharge side is specified in the fan chart. Sound level at different octave bands both for discharge and inlet can be calculated using following formula: Lw oct(s) = L WA + K oct(s) Values for K oct(s) are available in the table for each fan later in this catalogue. S refers to sound path. The symbols used: = fan type and size. Capacity zone left-a refers to the area from the left hand side to the system curve marked with A. A-B refers to the area between the system curves marked with A and B. B-right refers to the area from the system curve marked with B to the right hand side Fan and sound data Fan data tested in accordance with ISO 5801 and ISO The data is presented class 1 according to RLT in selection programme. See page for sound data tables. GMEB-1-0b-056 Capacity zones Sound Min Max Correction K oct (db) in octave band mid-frequency (Hz) Left Right path r/min r/min GMEB-1-0b-056 Left A outlet Left A outlet Left A outlet Left A inlet Left A inlet Left A inlet GMEB-1-0b-056 A B outlet A B outlet A B outlet A B inlet A B inlet A B inlet GMEB-1-0b-056 B Right outlet B Right outlet B Right outlet B Right inlet B Right inlet B Right inlet Min r/min = minimum fan speed where the sound power level correction K oct is still applicable. Max r/min = maximum fan speed where the sound power level correction K oct is still applicable. Correction = Sound power level correction factors K oct for the octave bands 63 to 8000 Hz.
9 CentriFlow 3D - Technical Catalogue GMEB 9 Technical data - GMEB-1-0b-025 Fan data q v (m 3 /h) Dimensions W W1 Max L motor r/min 1,1 kw a b A c % W fc H1 H Ø impeller 1200 d H shaft L3 p s (Pa) db(a) e B f W2 L2 L1 ØAV Ø11 L fan ± g ,1 0,2 0,3 0,4 0,5 0,6 0,7 0,8 0,9 1 q v (m 3 /s) Anti vibration mountings GMEZ d-0 (rubber) H Ø * Hardness front back d Ø H * Ø H * A A Efficiency data for maximum Efficiency data for maximum efficiency point speed for complete fan, η esd, % Max η esd q v Δp s P ed Speed Installation Efficiency a b c d e f g % FMEG m 3 /s Pa kw r/min category category VSD GMEB e A static Yes GMEB e A static Yes Efficiency values are total values for fan-motor and drive. Values show the fan data according to Regulations 327/2011/EU data, Dimensions and weight Nom Nom Max Max fre- Nom Power Speed Speed quency Current W W1 W2 W 1) fc H H1 H Max Weight shaft L L fan L1 L2 L3 ØAV Ø Imp kw r/min r/min Hz A motor kg 2) GMEB e 1, , GMEB e 1, , ) Dimension valid with built-on frequency converter. 2) Appr. total weight in kg (with a loose drive 6 kg).
10 10 GMEB CentriFlow 3D - Technical Catalogue Technical data - GMEB-1-0b-028 Fan data q v (m 3 /h) Dimensions W W1 Max L motor p s (Pa) r/min 2,2 kw ,75 a b A c % d 86 db(a) 83 e B f W fc W2 H1 H H shaft L3 L2 L1 Ø impeller ØAV Ø g ,1 0,2 0,3 0,4 0,5 0,6 0,7 0,8 0,9 1 1,1 1,2 1,3 1,4 1,5 q v (m 3 /s) Anti vibration mountings GMEZ d-0 (rubber) Ø front back d Ø H * Ø H * H A A A A * Hardness L fan ±2 Efficiency data for maximum Efficiency data for maximum efficiency point speed for complete fan, η esd, % Max η esd q v Δp s P ed Speed Installation Efficiency a b c d e f g % FMEG m 3 /s Pa kw r/min category category VSD GMEB e A static Yes GMEB e A static Yes GMEB e A static Yes GMEB e A static Yes Efficiency values are total values for fan-motor and drive. Values show the fan data according to Regulations 327/2011/EU data, Dimensions and weight Nom Nom Max Max fre- Nom Power Speed Speed quency Current W W1 W2 W 1) fc H H1 H Max Weight shaft L L fan L1 L2 L3 ØAV Ø Imp kw r/min r/min Hz A motor kg 2) GMEB e GMEB e GMEB e GMEB e ) Dimension valid with built-on frequency converter. 2) Appr. total weight in kg (with a loose drive 6 kg).
11 CentriFlow 3D - Technical Catalogue GMEB 11 Technical data - GMEB-1-0b-031 Fan data q v (m 3 /h) r/min-4 kw a 2400 b A Dimensions W W1 W fc Max L motor ,2 c % d H1 H H shaft L3 Ø impeller p s (Pa) , db(a) , , B 96 e f g ,2 0,4 0,6 0,8 1,0 1,2 1,4 1,6 1,8 2,0 2,2 q v (m 3 /s) W2 Anti vibration mountings GMEZ d-0 (rubber) Ø30 Ø d front back Ø H * Ø H * H A A A A * Hardness 100 Hardness 1 30 A36 A A 112 front & 1 back A A L2 L1 ØAV Ø11 L fan ±2 40 GMEZ d-0 (spring) Ø70 d front back SD1 SD SD1 SD SD1 SD2 Without load SD1 SD2 Efficiency data for maximum Efficiency data for maximum efficiency point speed for complete fan, η esd, % Max η esd q v Δp s P ed Speed Installation Efficiency a b c d e f g % FMEG m 3 /s Pa kw r/min category category VSD GMEB e A static Yes GMEB e A static Yes GMEB e A static Yes GMEB e A static Yes GMEB e A static Yes GMEB e A static Yes GMEB e A static Yes GMEB e A static Yes GMEB e A static Yes GMEB e A static Yes GMEB e A static Yes GMEB e A static Yes Efficiency values are total values for fan-motor and drive. Values show the fan data according to Regulations 327/2011/EU data, Dimensions and weight Nom Nom Max Max fre- Nom Power Speed Speed quency Current W W1 W2 W 1) fc H H1 H Max Weight shaft L L fan L1 L2 L3 ØAV Ø Imp kw r/min r/min Hz A motor kg 2) GMEB e , GMEB e GMEB e , GMEB e , GMEB e , GMEB e , GMEB e , GMEB e , GMEB e GMEB e , GMEB e , GMEB e ) Dimension valid with built-on frequency converter. 2) Appr. total weight in kg (with a loose drive 6 kg).
12 12 GMEB CentriFlow 3D - Technical Catalogue Technical data - GMEB-1-0b-035 Fan data q v (m 3 /h) Dimensions W W1 Max L motor r/min 4,0 kw a b A W fc p s (Pa) ,0 c d % ,2 90 db(a) B e , ,1 93 f ,75 84 g ,5 1,0 1,5 2,0 2,5 3,0 q v (m 3 /s) Anti vibration mountings GMEZ d-0 (rubber) H Ø * Hardness W2 H1 H d front back Ø H * Ø H * A A A A A A A A H shaft L3 L2 L1 Ø impeller ØAV Ø11 L fan ±2 40 GMEZ d-0 (spring) Ø70 d front back SD1 SD SD1 SD SD1 SD2 Without load SD1 SD2 Efficiency data for maximum Efficiency data for maximum efficiency point speed for complete fan, η esd, % Max η esd q v Δp s P ed Speed Installation Efficiency a b c d e f g % FMEG m 3 /s Pa kw r/min category category VSD GMEB e ,5 75 0, , A static Yes GMEB e ,7 77 0, , A static Yes GMEB e ,1 75 0, , A static Yes GMEB e , , A static Yes GMEB e , , A static Yes GMEB e ,1 73 0, , A static Yes GMEB e ,6 72 1, , A static Yes GMEB e ,7 74 1, , A static Yes GMEB e ,7 73 1, , A static Yes GMEB e ,6 75 1, , A static Yes GMEB e ,3 72 1, , A static Yes GMEB e ,1 74 1, , A static Yes GMEB e ,1 70 1, , A static Yes GMEB e ,7 72 1, , A static Yes Efficiency values are total values for fan-motor and drive. Values show the fan data according to Regulations 327/2011/EU data, Dimensions and weight Nom Nom Max Max fre- Nom Power Speed Speed quency Current W W1 W2 W 1) fc H H1 H Max Weight shaft L L fan L1 L2 L3 ØAV Ø Imp kw r/min r/min Hz A motor kg 2) GMEB e 0, , GMEB e 0, , GMEB e 1, , GMEB e 1, , GMEB e 1, , GMEB e 1, , GMEB e 1, , GMEB e 1, , GMEB e 2, , GMEB e 2, , GMEB e GMEB e , GMEB e , GMEB e , ) Dimension valid with built-on frequency converter. 2) Appr. total weight in kg (with a loose drive 6 kg).
13 CentriFlow 3D - Technical Catalogue GMEB 13 Technical data - GMEB-1-0b-040 Fan data p s (Pa) q v (m 3 /h) r/min 5,5 kw a 2400 A b 2200 c , , db(a) , , , d % B e 94 f g ,5 1,0 1,5 2,0 2,5 3,0 3,5 q v (m 3 /s) W fc Dimensions Anti vibration mountings GMEZ d-0 (rubber) H Ø * Hardness W W1 W2 H1 H d front back Ø H * Ø H * A A A A A A A A H shaft L3 L2 L1 Max L motor Ø impeller ØAV Ø11 L fan ±2 40 GMEZ d-0 (spring) Ø70 d front back SD1 SD SD1 SD SD1 SD2 Without load SD2 SD3 Efficiency data for maximum Efficiency data for maximum efficiency point speed for complete fan, η esd, % Max η esd q v Δp s P ed Speed Installation Efficiency a b c d e f g % FMEG m 3 /s Pa kw r/min category category VSD GMEB e ,6 74 0, , A static Yes GMEB e ,6 76 1, , A static Yes GMEB e , , A static Yes GMEB e ,7 75 1, , A static Yes GMEB e ,8 72 1, , A static Yes GMEB e ,4 74 1, , A static Yes GMEB e ,8 71 1, , A static Yes GMEB e ,7 73 1, , A static Yes GMEB e ,9 70 1, , A static Yes GMEB e ,7 73 1, , A static Yes GMEB e ,7 70 1, , A static Yes GMEB e ,4 72 1, , A static Yes GMEB e ,4 68 1, , A static Yes GMEB e , , A static Yes Efficiency values are total values for fan-motor and drive. Values show the fan data according to Regulations 327/2011/EU data, Dimensions and weight Nom Nom Max Max fre- Nom Power Speed Speed quency Current W W1 W2 W 1) fc H H1 H Max Weight shaft L L fan L1 L2 L3 ØAV Ø Imp kw r/min r/min Hz A motor kg 2) GMEB e 1, , GMEB e 1, , GMEB e 1, , GMEB e 1, , GMEB e 2, , GMEB e 2, , GMEB e 2, , GMEB e 2, , GMEB e GMEB e , GMEB e , GMEB e , GMEB e 5, , GMEB e 5, ) Dimension valid with built-on frequency converter. 2) Appr. total weight in kg (with a loose drive 6 kg).
14 14 GMEB CentriFlow 3D - Technical Catalogue Technical data - GMEB-1-0b-045 Fan data p s (Pa) r/min 7,5 kw , , , , , ,1 83 a 86 q v (m 3 /h) b A 92 e B 0,5 1 1,5 2 2,5 3 3,5 4 4,5 q v (m 3 /s) c 89 db(a) d % 95 f g 98 W fc Dimensions Anti vibration mountings GMEZ d-0 (rubber) H Ø * Hardness W W1 W2 H1 H d front back Ø H * Ø H * A A A A A A A B H shaft L3 L2 L1 Max L motor Ø impeller ØAV Ø11 L fan ±2 40 GMEZ d-0 (spring) Ø70 d front back SD1 SD SD1 SD SD1 SD2 Without load SD2 SD3 Efficiency data for maximum Efficiency data for maximum efficiency point speed for complete fan, η esd, % Max η esd q v Δp s P ed Speed Installation Efficiency a b c d e f g % FMEG m 3 /s Pa kw r/min category category VSD GMEB e ,3 72 1, , A static Yes GMEB e ,3 75 1, , A static Yes GMEB e ,7 75 1, , A static Yes GMEB e ,5 77 1, , A static Yes GMEB e ,1 74 1, , A static Yes GMEB e ,8 76 1, , A static Yes GMEB e ,0 74 1, , A static Yes GMEB e ,5 76 1, , A static Yes GMEB e ,0 66 2, , A static Yes GMEB e ,6 68 2, , A static Yes GMEB e ,7 67 2, , A static Yes GMEB e ,3 68 2, , A static Yes GMEB e ,1 67 2, , A static Yes GMEB e ,5 68 2, , A static Yes Efficiency values are total values for fan-motor and drive. Values show the fan data according to Regulations 327/2011/EU data, Dimensions and weight Nom Nom Max Max fre- Nom Power Speed Speed quency Current W W1 W2 W 1) fc H H1 H Max Weight shaft L L fan L1 L2 L3 ØAV Ø Imp kw r/min r/min Hz A motor kg 2) GMEB e 1, , GMEB e 1, , GMEB e 1, , GMEB e 1, , GMEB e 2, , GMEB e 2, , GMEB e , GMEB e , GMEB e , GMEB e , GMEB e 5, , GMEB e 5, GMEB e 7, , GMEB e 7, , ) Dimension valid with built-on frequency converter. 2) Appr. total weight in kg (with a loose drive 6 kg).
15 CentriFlow 3D - Technical Catalogue GMEB 15 Technical data - GMEB-1-0b-050 Fan data q v (m 3 /h) Dimensions W W1 Max L motor r/min 11 kw ,5 a b A c W fc H1 H Ø impeller ,5 d % H shaft L3 p s (Pa) e ,0 B ,0 91 db(a) ,2 f ,5 g ,5 1 1,5 2 2,5 3 3,5 4 4,5 5 5,5 6 q v (m 3 /s) Anti vibration mountings GMEZ d-0 (rubber) H Ø * Hardness W2 d front back Ø H * Ø H * A A A A A A A B A A L2 L1 ØAV Ø11 L fan ±2 40 GMEZ d-0 (spring) Ø70 d front back SD2 SD SD2 SD SD2 SD3 Without load SD2 SD SD3 SD5 Efficiency data for maximum Efficiency data for maximum efficiency point speed for complete fan, η esd, % Max η esd q v Δp s P ed Speed Installation Efficiency a b c d e f g % FMEG m 3 /s Pa kw r/min category category VSD GMEB e ,6 73 1, , A static Yes GMEB e ,4 76 1, , A static Yes GMEB e ,4 72 1, , A static Yes GMEB e ,2 74 1, , A static Yes GMEB e ,4 71 2, , A static Yes GMEB e ,1 73 2, , A static Yes GMEB e ,2 73 2, , A static Yes GMEB e ,5 74 2, , A static Yes GMEB e ,7 72 2, , A static Yes GMEB e ,1 73 2, , A static Yes GMEB e ,0 67 3, , A static Yes GMEB e ,5 69 3, , A static Yes GMEB e ,5 68 3, , A static Yes GMEB e ,7 69 3, , A static Yes Efficiency values are total values for fan-motor and drive. Values show the fan data according to Regulations 327/2011/EU data, Dimensions and weight Nom Nom Max Max fre- Nom Power Speed Speed quency Current W W1 W2 W 1) fc H H1 H Max Weight shaft L L fan L1 L2 L3 ØAV Ø Imp kw r/min r/min Hz A motor kg 2) GMEB e 1, , GMEB e 1, , GMEB e 2, , GMEB e 2, , GMEB e , GMEB e , GMEB e , GMEB e , GMEB e 5, GMEB e 5, , GMEB e 7, , GMEB e 7, , GMEB e GMEB e , ) Dimension valid with built-on frequency converter. 2) Appr. total weight in kg (with a loose drive 6 kg).
16 16 GMEB CentriFlow 3D - Technical Catalogue Technical data - GMEB-1-0b-056 Fan data q v (m 3 /h) Dimensions W W1 Max L motor p s (Pa) r/min 11 kw a b A ,5 c 1750 d % ,5 92 B 1250 e ,0 89 db(a) , , f ,5 g q v (m 3 /s) W fc Anti vibration mountings GMEZ d-0 (rubber) H Ø * Hardness W2 H1 H d front back Ø H * Ø H * A A A A A A A A H shaft L3 L2 L1 Ø impeller ØAV Ø11 L fan ±2 40 GMEZ d-0 (spring) Ø70 d front back SD2 SD SD2 SD SD3 SD3 Without load SD4 SD5 Efficiency data for maximum Efficiency data for maximum efficiency point speed for complete fan, η esd, % Max η esd q v Δp s P ed Speed Installation Efficiency a b c d e f g % FMEG m 3 /s Pa kw r/min category category VSD GMEB e ,9 72 1, , A static Yes GMEB e ,9 75 1, , A static Yes GMEB e ,8 72 2, , A static Yes GMEB e ,6 74 2, , A static Yes GMEB e ,6 71 2, , A static Yes GMEB e ,1 73 2, , A static Yes GMEB e ,0 71 2, , A static Yes GMEB e ,4 73 2, , A static Yes GMEB e ,5 71 2, , A static Yes GMEB e ,8 73 2, , A static Yes GMEB e ,5 70 2, , A static Yes GMEB e ,7 71 2, , A static Yes GMEB e ,6 67 3, , A static Yes GMEB e ,7 68 3, , A static Yes Efficiency values are total values for fan-motor and drive. Values show the fan data according to Regulations 327/2011/EU data, Dimensions and weight Nom Nom Max Max fre- Nom Power Speed Speed quency Current W W1 W2 W 1) fc H H1 H Max Weight shaft L L fan L1 L2 L3 ØAV Ø Imp kw r/min r/min Hz A motor kg 2) GMEB e 1, , GMEB e 1, , GMEB e 2, , GMEB e 2, , GMEB e , GMEB e , GMEB e , GMEB e , GMEB e 5, GMEB e 5, , GMEB e 7, GMEB e 7, , GMEB e , GMEB e ) Dimension valid with built-on frequency converter. 2) Appr. total weight in kg (with a loose drive 6 kg).
17 CentriFlow 3D - Technical Catalogue GMEB 17 Technical data - GMEB-1-0b-063 Fan data q v (m 3 /h) Dimensions W W1 Max L motor p s (Pa) r/min 15 kw a b A 2000 c ,5 d % ,5 94 e 1250 B ,0 91 db(a) ,0 f ,2 g q v (m 3 /s) W fc Anti vibration mountings GMEZ d-0 (rubber) H Ø * Hardness W2 H1 H d front back Ø H * Ø H * A A A A A A H shaft L3 L2 L1 Ø impeller ØAV Ø11 L fan ±2 40 GMEZ d-0 (spring) Ø70 d front back SD2 SD SD3 SD SD4 SD5 Without load Efficiency data for maximum Efficiency data for maximum efficiency point speed for complete fan, η esd, % Max η esd q v Δp s P ed Speed Installation Efficiency a b c d e f g % FMEG m 3 /s Pa kw r/min category category VSD GMEB e ,2 70 2, , A static Yes GMEB e ,9 72 2, , A static Yes GMEB e ,6 72 2, , A static Yes GMEB e ,2 73 2, , A static Yes GMEB e ,6 71 3, , A static Yes GMEB e ,0 72 3, , A static Yes GMEB e ,1 69 3, , A static Yes GMEB e ,4 71 3, , A static Yes GMEB e ,3 70 3, , A static Yes GMEB e ,6 71 3, , A static Yes GMEB e ,9 69 3, , A static Yes GMEB e ,0 70 3, , A static Yes GMEB e ,9 68 4, , A static Yes GMEB e ,9 69 4, , A static Yes Efficiency values are total values for fan-motor and drive. Values show the fan data according to Regulations 327/2011/EU data, Dimensions and weight Nom Nom Max Max fre- Nom Power Speed Speed quency Current W W1 W2 W 1) fc H H1 H Max Weight shaft L L fan L1 L2 L3 ØAV Ø Imp kw r/min r/min Hz A motor kg 2) GMEB e 2, , GMEB e 2, , GMEB e , GMEB e GMEB e , GMEB e , GMEB e 5, GMEB e 5, , GMEB e 7, GMEB e 7, , GMEB e , GMEB e GMEB e GMEB e ) Dimension valid with built-on frequency converter. 2) Appr. total weight in kg (with a loose drive 6 kg).
18 18 GMEB CentriFlow 3D - Technical Catalogue Technical data - GMEB-1-0b-071 Fan data q v (m 3 /h) Dimensions W W1 Max L motor r/min 15 kw a W fc A b c d % H1 H H shaft L3 Ø impeller p s (Pa) db(a) ,5 B e , ,0 96 f ,0 84 g q v (m 3 /s) Anti vibration mountings GMEZ d-0 (rubber) H Ø * Hardness W2 d front back Ø H * Ø H * A A A A L2 L1 GMEZ d-0 (spring) Ø70 d front back SD3 SD SD4 SD5 Without load ØAV Ø11 L fan ±2 40 Efficiency data for maximum Efficiency data for maximum efficiency point speed for complete fan, η esd, % Max η esd q v Δp s P ed Speed Installation Efficiency a b c d e f g % FMEG m 3 /s Pa kw r/min category category VSD GMEB e ,1 70 3, , A static Yes GMEB e ,8 71 3, , A static Yes GMEB e ,8 69 3, , A static Yes GMEB e ,4 71 3, , A static Yes GMEB e ,8 66 4, , A static Yes GMEB e ,2 67 4, , A static Yes GMEB e ,7 68 4, , A static Yes GMEB e ,1 69 4, , A static Yes GMEB e ,3 69 4, , A static Yes GMEB e ,5 70 4, , A static Yes GMEB e ,9 68 5, , A static Yes GMEB e ,1 69 5, , A static Yes GMEB e ,3 67 5, , A static Yes GMEB e ,4 68 5, , A static Yes Efficiency values are total values for fan-motor and drive. Values show the fan data according to Regulations 327/2011/EU data, Dimensions and weight Nom Nom Max Max fre- Nom Power Speed Speed quency Current W W1 W2 W 1) fc H H1 H Max Weight shaft L L fan L1 L2 L3 ØAV Ø Imp kw r/min r/min Hz A motor kg 2) GMEB e , GMEB e GMEB e , GMEB e GMEB e 5, , GMEB e 5, , GMEB e 5, GMEB e 5, , GMEB e 7, GMEB e 7, , GMEB e , GMEB e GMEB e GMEB e ) Dimension valid with built-on frequency converter. 2) Appr. total weight in kg (with a loose drive 6 kg).
19 CentriFlow 3D - Technical Catalogue GMEB 19 Technical data - GMEB-1-0b-080 Fan data 2400 q v (m 3 /h) Dimensions W W1 Max L motor r/min 18,5 kw a A b c % H H1 Ø impeller p s (Pa) d db(a) B , ,5 90 e , ,0 f q v (m 3 /s) Anti vibration mountings GMEZ d-0 (rubber) H Ø * Hardness W2 H shaft d front back Ø H * Ø H * A A A A A B L1 Ø13.5 L fan ±2 50 GMEZ d-0 (spring) Ø70 d front back SD4 SD SD5 SD SD5 SD6 Without load Efficiency data for maximum Efficiency data for maximum efficiency point speed for complete fan, η esd, % Max η esd q v Δp s P ed Speed Installation Efficiency a b c d e f g % FMEG m 3 /s Pa kw r/min category category VSD GMEB e ,5 68 4, , A static Yes GMEB e ,3 70 4, , A static Yes GMEB e ,5 68 4, , A static Yes GMEB e ,1 70 4, , A static Yes GMEB e ,5 68 5, , A static Yes GMEB e ,9 69 5, , A static Yes GMEB e ,8 70 5, , A static Yes GMEB e ,3 71 5, , A static Yes GMEB e ,2 69 5, , A static Yes GMEB e ,4 70 5, , A static Yes GMEB e ,6 68 6, , A static Yes GMEB e ,8 69 6, , A static Yes GMEB e ,1 69 6, , A static Yes GMEB e ,2 70 6, , A static Yes GMEB e ,7 68 7, , A static Yes GMEB e ,7 69 7, , A static Yes Efficiency values are total values for fan-motor and drive. Values show the fan data according to Regulations 327/2011/EU data, Dimensions and weight Nom Power kw Nom Speed r/min Max Speed r/min Max frequency Hz Nom Current A W W1 W2 H H1 H shaft Max L motor L fan L1 Ø Imp Weight kg 1) GMEB e , GMEB e GMEB e , GMEB e GMEB e 5, , GMEB e 5, , GMEB e 7, , GMEB e 7, , GMEB e , GMEB e , GMEB e , GMEB e GMEB e GMEB e GMEB e 18, GMEB e 18, ) Appr. total weight in kg (with a loose drive 6 kg).
20 20 GMEB CentriFlow 3D - Technical Catalogue Technical data - GMEB-1-0b-090 Fan data q v (m 3 /h) Dimensions W W1 Max L motor p s (Pa) r/min-22 kw a A , , q v (m 3 /s) b c % d 96 db(a) e B f g 16 H H1 Anti vibration mountings GMEZ d-0 (rubber) H Ø * Hardness W2 H shaft d front back Ø H * Ø H * A A A B L1 GMEZ d-0 (spring) Ø70 d front back SD6 SD SD6 SD6 Without load Ø impeller Ø13.5 L fan ±2 50 Efficiency data for maximum Efficiency data for maximum efficiency point speed for complete fan, η esd, % Max η esd q v Δp s P ed Speed Installation Efficiency a b c d e f g % FMEG m 3 /s Pa kw r/min category category VSD GMEB e A static Yes GMEB e A static Yes GMEB e A static Yes GMEB e A static Yes GMEB e A static Yes GMEB e A static Yes GMEB e A static Yes GMEB e A static Yes GMEB e A static Yes GMEB e A static Yes Efficiency values are total values for fan-motor and drive. Values show the fan data according to Regulations 327/2011/EU data, Dimensions and weight Nom Power kw Nom Speed r/min Max Speed r/min Max frequency Hz Nom Current A W W1 W2 H H1 H shaft Max L motor L fan L1 Ø Imp Weight kg 1) GMEB e 7, , GMEB e 7, , GMEB e , GMEB e , GMEB e , GMEB e , GMEB e 18, GMEB e 18, GMEB e , GMEB e Appr. total weight in kg (with a loose drive 6 kg).
21 CentriFlow 3D - Technical Catalogue GMEB 21 Sound data GMEB-1-0b-025 Capacity zones Sound Min Max Correction K oct (db) in octave band mid-frequency (Hz) Left Right path r/min r/min GMEB-1-0b-025 Left A outlet Left A outlet Left A outlet Left A inlet Left A inlet Left A inlet GMEB-1-0b-025 A B outlet A B outlet A B outlet A B inlet A B inlet A B inlet GMEB-1-0b-025 B Right outlet B Right outlet B Right outlet B Right inlet B Right inlet B Right inlet GMEB-1-0b-028 Capacity zones Sound Min Max Correction K oct (db) in octave band mid-frequency (Hz) Left Right path r/min r/min GMEB 1 0b 028 Left A outlet Left A outlet Left A outlet Left A inlet Left A inlet Left A inlet GMEB 1 0b 028 A B outlet A B outlet A B outlet A B inlet A B inlet A B inlet GMEB 1 0b 028 B Right outlet B Right outlet B Right outlet B Right inlet B Right inlet B Right inlet
22 22 GMEB CentriFlow 3D - Technical Catalogue Sound data GMEB-1-0b-031 Capacity zones Sound Min Max Correction K oct (db) in octave band mid-frequency (Hz) Left Right path r/min r/min GMEB-1-0b-031 Left A outlet Left A outlet Left A outlet Left A inlet Left A inlet Left A inlet GMEB-1-0b-031 A B outlet A B outlet A B outlet A B inlet A B inlet A B inlet GMEB-1-0b-031 B Right outlet B Right outlet B Right outlet B Right inlet B Right inlet B Right inlet GMEB-1-0b-035 Capacity zones Sound Min Max Correction K oct (db) in octave band mid-frequency (Hz) Left Right path r/min r/min GMEB-1-0b-035 Left A outlet Left A outlet Left A outlet Left A inlet Left A inlet Left A inlet GMEB-1-0b-035 A B outlet A B outlet A B outlet A B inlet A B inlet A B inlet GMEB-1-0b-035 B Right outlet B Right outlet B Right outlet B Right inlet B Right inlet B Right inlet
23 CentriFlow 3D - Technical Catalogue GMEB 23 Sound data GMEB-1-0b-040 Capacity zones Sound Min Max Correction K oct (db) in octave band mid-frequency (Hz) Left Right path r/min r/min GMEB-1-0b-040 Left A outlet Left A outlet Left A outlet Left A inlet Left A inlet Left A inlet GMEB-1-0b-040 A B outlet A B outlet A B outlet A B inlet A B inlet A B inlet GMEB-1-0b-040 B Right outlet B Right outlet B Right outlet B Right inlet B Right inlet B Right inlet GMEB-1-0b-045 Capacity zones Sound Min Max Correction K oct (db) in octave band mid-frequency (Hz) Left Right path r/min r/min GMEB-1-0b-045 Left A outlet Left A outlet Left A outlet Left A inlet Left A inlet Left A inlet GMEB-1-0b-045 A B outlet A B outlet A B outlet A B inlet A B inlet A B inlet GMEB-1-0b-045 B Right outlet B Right outlet B Right outlet B Right inlet B Right inlet B Right inlet
24 24 GMEB CentriFlow 3D - Technical Catalogue Sound data GMEB-1-0b-050 Capacity zones Sound Min Max Correction K oct (db) in octave band mid-frequency (Hz) Left Right path r/min r/min GMEB-1-0b-050 Left A outlet Left A outlet Left A outlet Left A inlet Left A inlet Left A inlet GMEB-1-0b-050 A B outlet A B outlet A B outlet A B inlet A B inlet A B inlet GMEB-1-0b-050 B Right outlet B Right outlet B Right outlet B Right inlet B Right inlet B Right inlet GMEB-1-0b-056 Capacity zones Sound Min Max Correction K oct (db) in octave band mid-frequency (Hz) Left Right path r/min r/min GMEB-1-0b-056 Left A outlet Left A outlet Left A outlet Left A inlet Left A inlet Left A inlet GMEB-1-0b-056 A B outlet A B outlet A B outlet A B inlet A B inlet A B inlet GMEB-1-0b-056 B Right outlet B Right outlet B Right outlet B Right inlet B Right inlet B Right inlet
25 CentriFlow 3D - Technical Catalogue GMEB 25 Sound data GMEB-1-0b-063 Capacity zones Sound Min Max Correction K oct (db) in octave band mid-frequency (Hz) Left Right path r/min r/min GMEB-1-0b-063 Left A outlet Left A outlet Left A outlet Left A inlet Left A inlet Left A inlet GMEB-1-0b-063 A B outlet A B outlet A B outlet A B inlet A B inlet A B inlet GMEB-1-0b-063 B Right outlet B Right outlet B Right outlet B Right inlet B Right inlet B Right inlet GMEB-1-0b-071 Capacity zones Sound Min Max Correction K oct (db) in octave band mid-frequency (Hz) Left Right path r/min r/min GMEB-1-0b-071 Left A outlet Left A outlet Left A outlet Left A inlet Left A inlet Left A inlet GMEB-1-0b-071 A B outlet A B outlet A B outlet A B inlet A B inlet A B inlet GMEB-1-0b-071 B Right outlet B Right outlet B Right outlet B Right inlet B Right inlet B Right inlet
26 26 GMEB CentriFlow 3D - Technical Catalogue Sound data GMEB-1-0b-080 Capacity zones Sound Min Max Correction K oct (db) in octave band mid-frequency (Hz) Left Right path r/min r/min GMEB-1-0b-080 Left A outlet Left A outlet Left A outlet Left A inlet Left A inlet Left A inlet GMEB-1-0b-080 A B outlet A B outlet A B outlet A B inlet A B inlet A B inlet GMEB-1-0b-080 B Right outlet B Right outlet B Right outlet B Right inlet B Right inlet B Right inlet GMEB-1-0b-090 Capacity zones Sound Min Max Correction K oct (db) in octave band mid-frequency (Hz) Left Right path r/min r/min GMEB-1-0b-090 Left A outlet Left A outlet Left A inlet Left A inlet GMEB-1-0b-090 A B outlet A B outlet A B inlet A B inlet GMEB-1-0b-090 B Right outlet B Right outlet B Right inlet B Right inlet
27 CentriFlow 3D - Technical Catalogue GMEB 27 Accessories Inlet cone with 4 measurement nipples - GMEZ-09 ANTI VIBRATION mountings, rubber - GMEZ-42 For particulars of the part designations and dimensions please see figure with product code table on the relevant fan page. The fan inlet is equipped with an air flow sensor with four measuring nipples. ANTI VIBRATION mountings, steel spring - GMEZ-43 Protective screen, inlet - GMEZ-13 For particulars of the part designations and dimensions please see figure and product code table on the relevant fan page. Flexible connection, inlet - GMEZ-21 Not available for sizes 025 and 028. Aout A1 Ain Bin B1 Bout Z x X2 H Z x X1 Size Aout Ain Bout Bin A1 B1 H Z X1 X PAINTED FINISH GMEZ ccc-d-0 d = 2 Polyester powder painted finish 100 µm, colour RAL 7047 light grey d = 3 Wet painted finish, painted in 3 coats 250 µm, colour 7047 light grey Painting process d = 2: The fan (impeller and static components) is painted with a 100 µm thick coat of polyester powder. Colour: RAL 7047 light grey. All bolts and screws are made of stainless steel. Painting process: - alkaline degreasing - iron phosphate treatment - flushing with hot water, water temperature 40 C - drying at 110 C - powder painting 100 µm, in one coat - drying in appr. 230 C Painting process d = 3: The fan (static components) is painted with 3 coats of epoxy, total thickness of 250 µm. The fan impeller is painted with 100 µm thick coat of polyester powder Colour: RAL 7047 light grey. All bolts and screws are made of stainless steel.
28 28 GMEB CentriFlow 3D - Technical Catalogue Accessories, Installation instructions CENTRIMETER GTLZ Fan in Air Handling Units The Air Handling Unit normally has an influence on fan capacity and sound data. As the fan data is given for free inlet - free outlet some corrections are required to estimate the data inside the casing. The new CentriFlow 3D fan is performing well inside the Air Handling Unit. Even in this case some corrections to catalogue may be needed. Estimated corrections are available in the software. Recommended minimum safety distances are shown in the following picture.. LD C R Provides a simple and accurate means of measuring a fan s airflow. ØD OPERATION PANEL PAN-08-0 E Size C Ø D E LD R
CENTRIFLOW 3D WITH AC MOTOR >> Technical catalouge
CENTRIFLOW 3D plug fan WITH AC MOTOR >> Technical catalouge air comfort Centriflow 3D 2 GMEB CentriFlow 3D - Technical Catalouge Contents GENERAL Description and survey chart Application... 3 General Survey
More informationCENTRIFLOW 3D WITH EC MOTOR >> Technical catalogue
CENTRIFLOW 3D Plug Fan WITH EC MOTOR >> Technical catalogue air comfort CentriFlow 3D 2 GMEC CentriFlow 3D - Technical Catalogue Contents GENERL Description and survey chart pplication... 3 General Survey
More informationCENTRIFLOW 3D PLUG FAN WITH PM-MOTOR TECHNICAL CATALOGUE
CENTRIFLOW 3D PLUG FN WITH PM-MOTOR TECHNICL CTLOGUE 2 CentriFlow 3D GMPM - Technical Catalogue CONTENTS GENERL DESCRIPTION ND SURVEY CHRT pplication... 3 General Survey Chart... 3 Quality and environment...4
More informationROOF FAN ROOFMASTER STEC
AIR COMFORT AIR MOVEMENT ROOF FANS ROOF FAN ROOFMASTER STEC INSULATED VERSION» TECHNICAL CATALOGUE 2 STEC Roofmaster - Technical Catalogue CONTENTS GENERAL DESCRIPTION Application/specification... 3 Features...
More informationCentriflow Plus EC. Technical data
Technical data Centriflow Plus CTLOGUE Contents General description...3 General survey chart...4 Design description Fan Impeller...5 Inlet cone and supporting frame...5 EC motor...5 ir flow sensor...6
More informationROOF FAN ROOFMASTER STEC NON-INSULATED VERSION TECHNICAL CATALOGUE
ROOF FAN ROOFMASTER STEC NON-INSULATED VERSION TECHNICAL CATALOGUE Roofmaster STEC non-insulated version - Technical Catalogue 3 CONTENTS GENERAL DESCRIPTION Application/specification...4 Features...4
More informationKitchen exhaust fan GLEB
Kitchen exhaust fan GLEB Contents General description...3 Quick selection...5 Design description...5 Material and design...6 Fan impeller...6 Motor...6...6 Quality...6 Specification...6 Technical data
More informationROOFMASTER STEF-HT ROOF FAN
fire safety Air movement Roof Fans ROOFMASTER STEF-HT ROOF FAN» Technical CATALOGuE Contents ROOFMASTER STEF-HT...3 Performance Data...4 Performance Table...5 General description...6 Fan Chart-explanation
More informationROOFMASTER STEF-ATEX ROOF FAN
Air Comfort Air movement Roof fans ROOFMASTER STEF-ATEX ROOF FAN» Technical CATALOGuE 2 STEF-ATEX Roofmaster - Technical Catalogue Contents General description Application/specification... 3 Features...
More informationROOFMASTER STEF ROOF FAN
Air Comfort Air movement Roof fans ROOFMASTER STEF ROOF FAN» Technical CATALOGuE Contents ROOFMASTER STEF...3 Performance Data...4 Performance Table...6 General description...8 Fan Chart-explanation and
More informationATZAF DOUBLE INLET CENTRIFUGAL FANS WITH AIRFOIL BACKWARD CURVED BLADES
ATZAF DOUBLE INLET CENTRIFUGAL FANS WITH AIRFOIL BACKWARD CURVED BLADES COMEFRI USA: Manufacturing and Warehouse facilities in Hopkinsville, KY. Total facility: 125,000 sq.ft. Producing centrifugal fans
More informationQuick guide. Plug-in fans GPPM with FC101_106 August 2014
Quick guide Plug-in fans GPPM with FC101_106 August 2014 Fläkt Woods permanent magnet motors and speed controllers for plug fans GPPM 1. General Fläkt Woods offers a wide range of permanent magnet motors
More informationROOFMASTER STEF-HT ROOF FAN
fire safety Air movement Roof Fans ROOFMASTER STEF-HT ROOF FAN» Technical CATALOGuE Contents ROOFMASTER STEF-HT...3 Performance Data...4 Performance Table...5 General description...6 Fan Chart-explanation
More informationMultifunctional 400ºC/2h and 300ºC/2h roof fans
HTMF Multifunctional 400ºC/2h and 300ºC/2h roof fans Multifunctional 400ºC/2h ceiling fans to work inside fire danger zones, designed for smoke extraction in industrial or similar buildings. 0370-CPR-0544
More informationBPF. Centrifugal Plug Fans
BPF Centrifugal Plug Fans Introduction INTRODUCTION Plug Fans S&P - THE COMPANY Soler & Palau was founded in 1951 in Ripoll (Spain) and since this date has become one of the world s leading companies engaged
More informationEnergy-saving motors (ESM)
Energy-saving motors (ESM) Technology Accessories EC-SYSTEMS ESM General information K series Q-motor EC axial EC axial fans A series fans Energy-saving motors (ESM) 316 Air performance curves 3 Energy-saving
More informationCAS 460 2T 7.5. Impeller size motor poles 2=3500 r/min. 60 Hz. Installed power
CAS CAS: High pressure, single inlet centrifugal fans with sheet steel casing and impeller : High pressure, single inlet centrifugal fans with sheet steel casing and impeller, fitted with acoustic attenuators
More informationMultifunctional roof fans for large flows. Multifunctional roof fans, highly robust construction, for large flows
HTMH Multifunctional roof fans for large flows Multifunctional roof fans, highly robust construction, for large flows Fan: Painted galvanised sheet steel base plate Turnable impellers cast aluminium. Protection
More informationCentrifugal fan with highly efficient EC drive motor
Centrifugal fan with highly efficient EC drive motor simple and safe application and installation 2 Why HLU? 90 years of experience in the plastics processing market More than 10.000 m² production in Germany
More informationCNA-CNB CNA-CNB CENTRIFUGAL FANS STANDARD TEMPERATURES AND EX
NA-NB NA-NB ENTRIFUGAL FANS STANDARD TEMPERATURES AND EX PRODUT FATS PRODUT The centrifugal fans type NA and NB are robust and versatile fans of the single-inlet type with backward-curved blades. APPLIATION
More information3D SERIES. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS Page - SPECIFICATIONS 0 SELECTION CHART 1 TYPE KEY 3 PERFORMANCE CURVE SPECIFICATIONS 4 PERFORMANCE CURVE 32-125 5 PERFORMANCE CURVE 32-6 PERFORMANCE CURVE 32-0 7 PERFORMANCE CURVE 40-125 8 PERFORMANCE
More informationAxial fans 400ºC/2h and 300ºC/2h With soundproofed box. Extraction units with axial fans to work inside fire danger zones.
CJTHT Axial fans 400ºC/2h and 300ºC/2h With soundproofed box Extraction units with axial fans to work inside fire danger zones. Fan: Sheet steel long casing fan. Galvanised sheet steel structure with thermal
More informationPowerful centrifugal fans for universal use: The product ranges TEM and REM
Powerful centrifugal fans for universal use: The product ranges TEM and REM The fan ranges TEM and REM offered by Nicotra Gebhardt do present a large fan programme of single inlet centrifugal fans which
More informationKAT. DOUBLE INLET CENTRIFUGAL FAN with Forward Wheels
KAT DOUBLE INLET ENTRIFUGAL FAN with Forward Wheels KAT Series DOUBLE INLET ENTRIFUGAL FAN with Forward Wheels Kruger Ventilation Industries certifies that the KAT series : version S and - model 9-7 to
More informationHRS. Very high efficiency heat recovery units. from 300 to m³/h >90 % WITH HIGH EFFICIENCY HEAT RECOUPERATOR
4 Lmf Clima 6 FERRARO GROUP HRS Very high efficiency heat recovery units WITH HIGH EFFICIENCY HEAT RECOUPERATOR from 3 to 4. m³/h Air-handling unit designed and manufactured for nonresidential applications,
More informationTHT/HATCH THT/HATCH. Order code THT/HATCH 40 2T 1 N 1 G
THT/HATCH High-powered ventilators with motorised opening and equipped with a roof fan, for smoke extraction in the event of a fire, 400ºC/2h High-powered ventilators with roof fan and motorised opening.
More informationAAVC. Accessories HIGH PRESSURE FANS HIGH PRESSURE WITH BACKWARD IMPELLER MANUFACTURING FEATURES:
AAVC HIGH PRESSURE WITH BACKWARD IMPELLER MANUFACTURING FEATURES: Accessories Fan made of Fe360 sheet. The fan paint finish is based on a Qualicoat polyester powder coating stoved at 200ºC, with an average
More informationASA. SINGLE INLET CENTRIFUGAL FAN with Airfoil Wheels
ASA SINGE INET ENTRIUGA AN with Airfoil heels ASA Series SINGE INET ENTRIUGA AN with Airfoil heels Kruger Ventilation Industries certifies that the ASA series shown herein is licensed to bear the AMA Seal.
More informationhore PRODUCT CATALOGUE nd Offsh arine an ms for Ma & Refrig CENTRIFUGAL FANS HV VAC &
hore nd Offsh arine an ms for Ma geration System & Refrig HV VAC & PRODUCT CATALOGUE CENTRIFUGAL FANS ! "# $ % & " ' (! ) * +,+( -../01..2 PRODUCT CATALOGUE 73-16 CENTRIFUGAL FANS CONTENT PAGE 1. CENTRIFUGAL
More informationWINDER. Impellers with higher efficiency and less sound level
WINDER Impellers with higher efficiency and less sound level Winder Solutions The last new generation impeller With the Serrated Novovent Concept (S.N.C.), NOVOVENT, S.A. has developed a new blades generation.
More informationHRH. High efficiency heat recovery units. from 300 to m³/h >70 % WITH HIGH EFFICIENCY HEAT RECOUPERATOR
4 Lmf Clima 6 HRH High efficiency heat recovery units WITH HIGH EFFICIENCY HEAT RECOUPERATOR from 3 to 4.3 m³/h The HRH units have been designed for non-residential applications for which a forced and
More informationUnobox units with backward curved centrifugal impellers
Unobox Fans Unobox units with backward curved centrifugal impellers Type Code UNO 67-450 -4 E W Unobox Box size 50=500mm ; 67=670mm 80=800mm ; 102=1020mm Impeller diameter Number of poles D - Three Phase
More informationBSB. SINGLE INLET CENTRIFUGAL FAN with Backward Wheels
BSB SINGE INET ENTRIFUGA FAN with Backward heels BSB Series SINGE INET ENTRIFUGA FAN with Backward heels Kruger Ventilation Industries certifies that the BSB series shown herein is licensed to bear the
More informationNKE80-160/175A2F2AE-SBQQE
GRUNDFOS DATA BOOKLET NKE8-1/17AFAE-SBQQE Grundfos Pump 99187 Thank you for your interest in our products Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/nkebasis/99187/nke-8-1-17-a-f-a-e-bqqe.html
More information400ºC/2h centrifugal roof fans with horizontal or vertical air outlet CHT 200 4T BS. Installed capacity
400ºC/2h centrifugal roof fans with horizontal or vertical air outlet : 400ºC/2h centrifugal roof fans with horizontal air outlet, hood in aluminium : 400ºC/2h centrifugal roof fans with vertical air outlet,
More information400ºC/2h and 300ºC/2h roof-mounted helical extractor fans with vertical air outlet
THT/ROOF ROOF-MOUNTED SMOKE EXTRACTOR FANS THT/ROOF 400ºC/2h and 300ºC/2h roof-mounted helical extractor fans with vertical air outlet Roof-mounted helical extractor fans with vertical air outlet, for
More informationPlate mounted axial flow fans HXBR / HXTR Series
Plate mounted axial flow fans manufactured from high grade galvanised steel and provided with a Sickle blade impeller, low sound level, protected against corrosion by cataforesis primer and a polyester
More informationCODE MODEL 1RC9020 REC PRO 90 S RC9021 REC PRO 90 S RC9022 REC PRO 90 S RC9023 REC PRO 90 S
REC PRO 9S High efficiency Heat Recovery Units Non residential applications EFFICIENCY 9% Comply with ErP Directive 125/29/CE and EU Regulation 1253/214. Classification: Non Residential Ventilation Unit
More informationExplanation of AR Series Ventilator Products. Fan type code D S AR AE
Series Axial Fan Explanation of Series Ventilator Products Fan type code 450-7 /26 D -2 F400 Smoke Extract Fan 400 C, 300 C Number of Poles D S Three Phase Single Phase AE AE Features and construction
More informationNBE50-250/205 A-F2-A-BAQE
GRUNDFOS DATA BOOKLET NBE5-25/25 A-F2-A-BAQE Grundfos pump 9518635 Thank you for your interest in our products. Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/nbe/9518635/nbe-5-25-25-a-f2-a-e-baqe.html
More informationShort casing. Long casing (L version) Commercial premises
CYLINDRICAL CASED AXIAL FLOW FANS TGT Series Adjustable Pitch Fans Long casing (L version) Short casing A P P L I C A T I O N S Range of adjustable pitch cased axial flow fans. Casings formed from rolled
More informationDynamically-balanced impellers with extremely robust cores CMP T 5.5
Medium pressure, single inlet centrifugal fans with sheet steel casing and impeller Fan: Sheet steel casing. Forward-curved impeller made of galvanised sheet steel. 38-2M model casing in cast aluminium.
More informationNB80-160/161 A-F2-A-BQQE
GRUNDFOS DATA BOOKLET NB8-16/161 A-F2-A-BQQE Grundfos pump 9943539 Thank you for your interest in our products. Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/nbe/9943539/nbe-125-315-275-as-f2-a-e-bqqe.html
More informationCentrimaster GX Catalogue GX Rev.01. January 2009
Centrimaster GX Catalogue GX Rev.01 January 2009 Versions CENTRIMASTER GX is a new generation centrifugal fan for air handling units. It is available for air flow up to 35 m3/s and for pressure rise up
More informationPowerful centrifugal fans for universal use: The product ranges TEM and REM
Powerful centrifugal fans for universal use: The product ranges TEM and REM The fan ranges TEM and REM offered by Nicotra Gebhardt do present a large fan programme of single inlet centrifugal fans which
More informationBSB SINGLE INLET CENTRIFUGAL FAN with Backward Wheels
BSB SINGE INET ENTRIUGA AN with Backward heels BSB Series SINGE INET ENTRIUGA AN with Backward heels Kruger Ventilation Industries certifies that the BSB series shown herein is licensed to bear the AMA
More informationNBE40-125/139 AS-F2-A-BAQE
GRUNDFOS DATA BOOKLET NBE-125/139 AS-F2-A-BAQE Grundfos pump 999983 Thank you for your interest in our products. Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/nbe/999983/nbe--125-139-as-f2-a-e-baqe.html
More informationHPR. Heat recovery units. from 700 to m³/h R410A HIGH EFFICIENCY WITH ENTHALPY EXCHANGER AND BUILT-IN HEAT PUMP SYSTEM
1 Lmf Clima 216 FERRARO GROUP HPR Heat recovery units HIGH EFFICIENCY WITH ENTHALPY EXCHANGER AND BUILT-IN HEAT PUMP SYSTEM from 7 to 23. m³/h Supporting structure in extruded aluminium profiles and curtain
More information3D SERIES. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS Page SPECIFICATIONS 0 PERFORMANCE RANGE and SELECTION CHART 1 TYPE KEY 3 PERFORMANCE CURVE SPECIFICATIONS 4 MEI INDEX SPECIFICATIONS 5 PERFORMANCE CURVE 32 6 PERFORMANCE CURVE 32 7 PERFORMANCE
More informationVLH 504 to Air-to-Water Reverse Cycle Heat Pumps. 126 to 294 kw. 133 to 307 kw
Air-to-Water Reverse Cycle Heat Pumps VLH 504 to 1204 126 to 294 kw 133 to 307 kw Technical Brochure TM VLH-N.3GB Date : June 2005 Supersedes : TM VLH-N.2GB/07.04 Specifications Advantages Range extension
More informationSLH 1202 to Air-to-Water Reverse Cycle Heat Pumps. With Screw Compressors. 261 to 775 kw. 287 to 853 kw
Air-to-Water Reverse Cycle Heat Pumps SLH 1202 to 3804 With Screw Compressors 261 to 775 kw 287 to 853 kw Technical Brochure TM SLH-A.2GB Date : November 2004 Supersedes : TM SLH-A.1GB/05.04 Design Features
More informationCRE A-F-A-E-HQQE 3x HZ
GRUNDFOS DATA BOOKLET CRE64-2-1 A-F-A-E-HQQE 3x4 6 HZ Grundfos pump 96123995 Thank you for your interest in our products. Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/cre64/96123995/cre-64-2-1-a-f-a-e-hqqe.html
More informationData sheet. Page: 1 / 7. ETL GG AV11D BKSBIE3M Inline pump. Operating data. Design
Data sheet Page: 1 / 7 Operating data Requested flow rate Requested developed head Pumped medium Ambient air temperature 20.0 C Fluid temperature 20.0 C Fluid density 998 kg/m³ Water Clean water Not containing
More informationAC centrifugal fan - RadiCal
RE5-RB6- ebm-papst Mulfingen GmbH & Co. KG Bachmühle D-767 Mulfingen Phone +9 798 8- Fax +9 798 8- info@de.ebmpapst.com www.ebmpapst.com Limited partnership Headquarters Mulfingen County court Stuttgart
More informationProduct Data Sheet ACi 4420 MLR
ACi 4420 MLR INDEX 1 General... 3 2 Mechanics... 3 2.1 General... 3 2.2 Connections... 4 3 Operating Data... 5 3.1 Operating Data - Electrical Interface - Input... 5 3.2 Electrical Operating Data... 5
More informationProduct Data Sheet ACi 4420 HHR
ACi 4420 HHR INDEX 1 General... 3 2 Mechanics... 3 2.1 General... 3 2.2 Connections... 4 3 Operating Data... 5 3.1 Operating Data - Electrical Interface - Input... 5 3.2 Electrical Operating Data... 5
More informationMax. airflow m 3 /s Diam. min. Diam. max
Axial Fans Max. airflow m 3 /s Diam. min Diam. max 1% adjustable motor Assembly, any position Reversible (3% Reduction) Page Number AW AR AW.97 2 3 * * 13 AR.97 2 3 * * 134 ZSP 2.9 315 5 * * 13 ZAP 13.89
More information3D SERIES. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS Page SPECIFICATIONS 0 SELECTION CHART 1 TYPE KEY 3 PERFORMANCE CURVE SPECIFICATIONS 4 MEI INDEX SPECIFICATIONS 5 PERFORMANCE CURVE 32 6 PERFORMANCE CURVE 32 7 PERFORMANCE CURVE 320 8 PERFORMANCE
More informationProduct Data Sheet 632 NU-006
The engineer's choice 632 NU-006 INDEX 1 General... 3 2 Mechanics... 3 2.1 General... 3 2.2 Connections... 3 3 Operating Data... 4 3.1 Operating Data - Electrical Interface - Input... 4 3.2 Electrical
More informationAC axial fan. sickled blades (S series) Wall ring with guard grille
W4E3-DN2-39 ebm-papst Mulfingen GmbH & Co. KG Bachmühle 2 D-74673 Mulfingen Phone +49 7938 81- Fax +49 7938 81-11 info1@de.ebmpapst.com www.ebmpapst.com Limited partnership Headquarters Mulfingen County
More informationCategory 1 (zone 0) covers areas, where there is a permanent or long lasting occurrence
Explosion proof fans General Systemair explosion proof fans have been developed to be used in effective supply and exhaust air systems allocated to category 2 (zone 1) and category 3 (zone 2) in explosion
More informationLPCD. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 203 PERFORMANCE CURVE 40 204 PERFORMANCE CURVE 50 205 PERFORMANCE CURVE 65 207 PERFORMANCE CURVE 80 208 PERFORMANCE
More informationKSOM Control exhaust valve
KSOM Control exhaust valve KSOM is ideal for rooms which require forced exhaust air flow. KSOM consists of exhaust valve, control motor and controller card, which are installed in the valve cone. KSOM
More informationCentrimaster GX. Catalogue GX Rev.03 October 2012
Centrimaster GX Catalogue GX Rev.03 October 2012 Versions CENTRIMASTER GX is a new generation centrifugal fan for air handling units. It is available for air flow up to 35 m3/s and for pressure rise up
More informationCENTRIFUGAL DIRECT DRIVE FANS CMT-CMB
CENTRIFUGAL DIRECT DRIVE FANS CMT-CMB Applications The CMT-CMB range of fans are suitable for many general and OEM ventilation applications where the extract of nonhazardous heated air is required. The
More informationProduct Data Sheet 4184 NXHH
The engineer's choice 4184 NXHH INDEX 1 General... 3 2 Mechanics... 3 2.1 General... 3 2.2 Connections... 3 3 Operating Data... 4 3.1 Operating Data - Electrical Interface - Input... 4 3.2 Electrical Operating
More informationAC centrifugal fan. backward curved
RE-AB6- ebm-papst Mulfingen GmbH & Co. KG Bachmühle D-767 Mulfingen Phone +9 798 8- Fax +9 798 8- info@de.ebmpapst.com www.ebmpapst.com Limited partnership Headquarters Mulfingen County court Stuttgart
More informationROOF MOUNTED AXIAL FLOW FANS HCTB / HCTT Series
asy to install Supports to facilitate installation in the roof. XTRACTION (type B) SUPPLY (type A) High quality steel sleeve nsuring the long life of the fan. Range of axial roof fans with horizontal air
More informationCross-flow Fans. TFD/FFD Series
Cross-flow Fans TFD/FFD Series Cross flow fans are particularly indicated for uses where, in limited space, high air volume is required with low noise and regular air-flow. The FF-FFD series provides an
More information500-YCI SERIES FAN-POWERED AIR TERMINAL UNIT FORM EG2 (404)
500-YCI SERIES FAN-POWERED AIR TERMINAL UNIT Table of Contents General Information...3 500-YCI Features...4-5 Dimensional Data...6-7 ARI Rating Points...8 Statement of Standard Test Conformity...8 Motor
More information- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 MECHANICAL SEAL 302 BEARINGS 303
CONTENTS Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY and CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 0.50 203 PERFORMANCE CURVE 0.80 204 PERFORMANCE CURVE 1.00 205 PERFORMANCE
More informationAC axial fan. sickled blades (S series) with full square nozzle
WD5-GA-9 ebm-papst Mulfingen GmbH & Co. KG Bachmühle D-767 Mulfingen Phone +9 798 8- Fax +9 798 8- info@de.ebmpapst.com www.ebmpapst.com Limited partnership Headquarters Mulfingen County court Stuttgart
More informationCRE20-08 A-F-A-E-HQQE 3x HZ
GRUNDFOS DATA BOOKLET CRE2-8 A-F-A-E-HQQE 3x4 6 HZ Grundfos pump 96514642 Thank you for your interest in our products. Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/cre2/96514642/cre-2-8-a-f-a-e-hqqe.html
More informationEBARA LPC 4-POLIGA CENTRIFUGALA PUMPAR
EBARA LPC 4-POLIGA CENTRIFUGALA PUMPAR CONTENTS - SPECIFICATIONS SELECTION CHART TYPE KEY AND CURVE SPECIFICATIONS LPC4 32 LPC4 40 LPC4 50 LPC4 65 LPC4 80 LPC4 100 LPC4 125 LPC4 150 - CONSTRUCTIONS SECTIONAL
More informationProduct Data Sheet 3214 JH3-195
3214 JH3-195 INDEX 1 General... 3 2 Mechanics... 3 2.1 General... 3 2.2 Connections... 3 3 Operating Data... 5 3.1 Operating Data - Electrical Interface - Input... 5 3.2 Electrical Operating Data... 6
More informationCORE VALUES TECHNOLOGIES ESS-ESD PRODUCT CATALOGUE Enjoy the peace of mind ENGINE POWER SUPPLIERS AND EQUIPMENT HEAT
TECHNOLOGIES ENGINE POWER SUPPLIERS AND EQUIPMENT HEAT Enjoy the peace of mind ESS-ESD PRODUCT CATALOGUE CORE VALUES PEACE OF MIND EFFICIENCY FAIRNESS RESPONSIBILITY CUSTOMER ORIENTATION GROWING DEVELOPED
More informationAATVP. Accessories HIGH PRESSURE FANS HIGH PRESSURE WITH BACKWARD IMPELLER AND BELT TRASMISSION MANUFACTURING FEATURES:
AATVP HIGH PRESSURE WITH BACKWARD IMPELLER AND BELT TRASMISSION MANUFACTURING FEATURES: Accessories Fan made of Fe36 sheet. The fan paint finish is based on a Qualicoat polyester powder coating stoved
More informationProduct Data Sheet 4184 NXHH
The engineer's choice 4184 NXHH INDEX 1 General... 3 2 Mechanics... 3 2.1 General... 3 2.2 Connections... 3 3 Operating Data... 5 3.1 Operating Data - Electrical Interface - Input... 5 3.2 Electrical Operating
More information1LG0 Low-voltage Motors
Low-voltage motors up to 315kW Catalog D81.5.1 1LG Low-voltage Motors Answers for industry. 1 Table of Contents Overview 3 Motor standards 5 Mechanical design 6 Electrical design 1 Converter fed application
More informationCONTRA ROTATING CASED AXIAL FANS TCBBx2 / TCBTx2 Series
Range of cylindrical cased axial fans fitted with aluminium impellers and manufactured from high grade rolled galvanised steel and protected against corrosion by cataforesis primer and black polyester
More informationAir Cooled Water Chillers. CLS 182 to to 150 kw. Technical Brochure TM CLS-W.3GB Date : October 2004 Supersedes : TM CLS-W.2GB/07.
Air Cooled Water Chillers CLS 182 to 602 41 to 150 kw Technical Brochure TM CLS-W.3GB Date : October 2004 Supersedes : TM CLS-W.2GB/07.04 R Specifications General characteristics The CLS air cooled water
More informationProduct Data Sheet DV5214 NU
The engineer's choice DV5214 NU INDEX 1 General... 3 2 Mechanics... 3 2.1 General... 3 2.2 Connections... 3 3 Operating Data... 4 3.1 Operating Data - Electrical Interface - Input... 4 3.2 Electrical Operating
More informationHIGH-POWERED VENTILATORS
HIGH-POWERED VENTILATORS WITH ROOF FANS 400ºC/2h The THT/HATCH series was designed using high-powered ventilator technology for smoke extraction in the event of a fire, and is equipped with THT series
More informationCross-Flow Fans. TF/FF Series
Cross-Flow Fans TF/FF Series Cross flow fans are particularly indicated for uses where, in limited space, high air volume is required with low noise and regular air-flow. The FF-FFD series provides an
More informationDXP 100 Air Cooled Condenser
Air Cooled Condenser Applied for CERTIFY-ALL DX COOLERS PRESENTATION The coolers are designed for outdoor applications. All technical data are based on different mixtures of cooling media i.e.ethylene
More informationDXP 100. Dry Cooler CERTIFY-ALL DX COOLERS
Dry Cooler CERTIFY-ALL DX COOLERS PRESENTATION The coolers are designed for outdoor applications. All technical data are based on different mixtures of cooling media i.e.ethylene glycol mixture. The coolers
More information500-YH SINGLE DUCT AIR TERMINAL UNIT FORM EG1 (1101)
500-YH SINGLE DUCT AIR TERMINAL UNIT FORM 130.12-EG1 (1101) Table of Contents General Description.......................................................................3 500-YH Features........................................................................4-5
More informationVolute Casing Centrifugal Pumps PN 16 for heat-transfer liquids Heat-transfer oil up to 350 C Hot water up to183 C
Volute Casing Centrifugal Pumps PN 16 for heat-transfer liquids Heat-transfer oil up to 350 C Hot water up to183 C Series CMIT in inline design Series CMAT with axial inlet ATEX 0 a Series CMAT Series
More informationNovenco axial flow fans. ZerAx - Standard January 2010
Novenco axial flow fans ZerAx - Standard January 2010 Product facts Product The Novenco ZerAx series of axial flow fans uses innovative design to reduce power consumption by improving efficiency. As an
More informationCentrifugal performance characteristics with axial flow pattern: RADAX VAR
High pressure in-line mixed-flow fans RADAX VAR Centrifugal performance characteristics with axial flow pattern: RADAX VAR COMPACT PRESSURE-RESISTANT UNIVERSAL In their compact casing, the RADAX VAR impellers
More informationProduct Data Sheet 4118 N/ The engineer's choice
The engineer's choice 4118 N/12-190 INDEX 1 General... 3 2 Mechanics... 3 2.1 General... 3 2.2 Connections... 3 3 Operating Data... 4 3.1 Electrical Operating Data... 4 3.2 Operating Data - Electrical
More informationHEAVY DUTY FANS FOR INDUSTRIAL APPLICATIONS
HEAVY DUTY FANS FOR INDUSTRIAL APPLICATIONS OUR COMMITMENT TO THE ENVIRONMENT Sodeca has begun a new stage of study and design of new trends in ventilation which will help to preserve the environment and
More informationLPC. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 203 32 205 40 206 50 210 65 213 80 216 100 218 - CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL 302 - DIMENSIONS
More informationCMA-B-C-D. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS Page - SPECIFICATIONS 200 PERFORMANCE RANGE 201 SELECTION CHART 202 TYPE KEY 203 CURVE SPECIFICATIONS 203 PERFORMANCE CURVE CMA 204 PERFORMANCE CURVE CMB 205 PERFORMANCE CURVE CMC 206 PERFORMANCE
More informationVARIABLE SPEED WATER BOOSTER SETS WITH MULTISTAGE VERTICAL ELECTRIC PUMPS FLOW RATES UP TO 400 m 3 /h. 50 Hz GHV30 GHV40 SERIES
VARIABLE SPEED WATER BOOSTER SETS WITH MULTISTAGE VERTICAL ELECTRIC PUMPS FLOW RATES UP TO 400 m 3 /h 50 Hz SERIE GHV10 GHV20 GHV30 GHV40 SERIES EDITION 10-2005 CONTENTS Range... 3 Operation description...
More informationProduct Data Sheet 8412 NHU-519
The engineer's choice 8412 NHU-519 INDEX 1 General... 3 2 Mechanics... 3 2.1 General... 3 2.2 Connections... 3 3 Operating Data... 4 3.1 Operating Data - Electrical Interface - Input... 4 3.2 Electrical
More informationDuct Fans - ESTOC EC Range. Estoc EC Features. Electrical Supply. Sizes 355, 400, 450, 500, 560 and 630. Product Code
Tubes and ox Fans Duct Fans - ESTOC EC Range Features Sizes from 55 to 6 mm diameter ir flow 19, m /h (4. m /s) Static pressures up to 84 Pa Maximum temperature up to 6 C Controllable external rotor motors
More informationGigaBox centrifugal fans Product specific information
GigaBox centrifugal fans Product specific information GigaBox and accessories Wall bracket GB-WK (ccessories) Outdoor cover hood GB-WSD (ccessories) Included in delivery: a) Flexible sleeve b) Outlet spigot,
More informationProduct Data Sheet 4184 NGX
The engineer's choice 4184 NGX INDEX 1 General... 3 2 Mechanics... 3 2.1 General... 3 2.2 Connections... 3 3 Operating Data... 4 3.1 Operating Data - Electrical Interface - Input... 4 3.2 Electrical Operating
More informationIN-LINE DUCT FANS MIXVENT-TD Fan Systems
IN-LINE DUCT FANS MIXVENT-TD Fan Systems NEW TD-EXTRACTOR KIT (see page 175) MIXVENT TD / MIXVENT TD-T MIXVENT TDx2 ACCESSORIES Description Range Construction The MIXVENT system has been designed to compliment
More information