Lowara. Centrifugal Electric Pumps Manufactured in AISI 316 Stainless Steel in Compliance with EN 733. SH Series. 60 Hz

Transcription

1 Centrifugal Electric Pumps Manufactured in AISI 316 Stainless Steel in Compliance with EN 733 SH Series 60 Hz

2 SERIE SH HYDRAULIC PERFORMANCE RANGE AT 60 Hz WEB

3 CONTENTS 5 Specifications... 6 Construction Characteristics... 8 List of Models... 9 List of Models and Tables of Materials SH Mechanical Seal Motors Hydraulic Performance Range 60 Hz, 2 poles Hydraulic Performance Range 60 Hz, 4 poles Operating Characteristics 60 Hz, 2 poles Operating Characteristics 60 Hz, 4 poles Dimensions and Weights... Accessories Technical Appendix

4 4 Lowara

5 Centrifugal electric pumps made of AISI 316 stainless steel in compliance with EN 733 MARKET SECTORS The Lowara SH series pumps are used for water and clean liquid circulation in heating, ventilating and air conditioning systems, and for pressure boosting in industrial applications. SH Series SPECIFICATIONS PUMP The SH series consists of singlestage centrifugal pumps made of pressed AISI 316 stainless steel. The liquid sizes and diameters of the suction and delivery ports are in compliance with EN 733 standards (ex DIN 24255). Flange dimensions in compliance with EN Available sizes: DN 25 to DN 80. Anti-clockwise rotation when facing pump s suction port. Back pull-out design. APPLICATION RANGE up Delivery to 240 m 3 /h, 2 poles up to 145 m 3 /h, 4 poles Head up to 120 m, 2 poles up to 30 m, 4 poles Temperature of pumped liquid Standard C Special versions available on request. Maximum working pressure 12 bar (PN 12). MOTOR Three-phase asynchronous, squirrel cage rotor, enclosed construction, external ventilation. Performances according to EN Standard supply Lowara motors up to 7,5 kw (included) for the 4-pole version, and up to 22 kw (included) for the 2-pole version. Other motor brands for higher powers. The Lowara surface motors have efficiency values that fall within the range normally referred to as efficiency class 2. IP 55 protection. Insulation class F. Max. ambient temperature: 40 C. For different environmental conditions, check the power. Overload protection to be provided by user. Condensation drain plugs on all motors. Standard voltage: 2-pole motors Single phase: V, 60Hz Three phase: 220/380V, 60Hz 4-pole motors Three phase: 220/380V, 60Hz 5

6 CONSTRUCTION CHARACTERISTICS Stainless steel centrifugal pump with axial suction and radial discharge ports Stainless steel AISI 316L pump casing Flanges according to EN (ex UNI 2236) and DIN 2532 Back pull-out design (impeller, adaptor and motor can be extracted without disconnecting the pump body from the pipes) Stainless steel AISI 316L, close type, impeller, laser welded on sizes 25, 32, 40, 50, /75 and /110 A. AISI CF8M stainless steel on other sizes Mechanical seal according to EN (ex DIN 24960) AISI 316L plugs MOTOR-PUMP COUPLING SHE close coupled by means of an adaptor bracket with the impeller keyed directly to the motor shaft extension SHS with a bracket, adaptor and rigid coupling keyed to the standard motor shaft extension SHF with bracket, support, flexible coupling and aligning and anchoring base Bare shaft pump and version with spacer coupling are also available upon request ACCESSORIES ON REQUEST AISI 316 stainless steel or galvanised iron counter flanges Intermediate flange with pressure gauge connection Pump and motor shims EXECUTIONS ON REQUEST Different voltages and frequencies Special materials for the mechanical seals and gaskets Model with external fluxing of the mechanical seal Tropicalized motors Version with Hydrovar control system SHF with flexible coupling with spacer Diesel engines Efficiency class 1 motors 6

7 SH SERIES IDENTIFICATION CODE SH E / A Reduced impeller 6 = 60 Hz Rated motor power (kw x 10) Impeller nominal diameter (mm) Delivery port nominal diameter (mm) = 2-pole motor 4 = 4-pole motor E = close-coupled version S = version with rigid coupling, IEC standard motor F = version with flexible coupling, base according to EN 733 SH Series name SHE - SHS RATING PLATE LEGEND 1 Electric pump type 2 Code 3 Delivery range 4 Head range 5 Motor type 6 Date of manufacture and serial number 7 Impeller diameter 8 Minimun head 9 Mechanical seal material identification code 10 Speed 11 Rated output 12 Maximum operating temperature 13 Maximun operating pressure 14 O-ring material identification code SHF RATING PLATE (PUMP ONLY) SHF RATING PLATE (ELECTRIC PUMP) 7

8 LIST OF MODELS, SH 60 Hz SERIES 2 POLES 4 POLES SIZE kw VERSION SIZE kw SHE SHS SHF /116 1, /156 1, /226 2, / / /556 5, /756 7, / /116 1, /156 1, /226 2, / / /556 5, /756 7, / /156 1, /226 2, / / /556 5, /756 7, /926 9, /1106A / / / / /556 5, /756 7, /926 9, /1106A / / / , / /556 5, /756 7, /926 9, /1106A / / / , / / / / / ,5 = Available / / / / / / VERSION SHE4 SHS4 SHF /026 0, /026 0, /036 0, /036 0, /056 0, /076 0, /116 1, /156 1, /026 0, /026 0, /036 0, /036 0, /056 0, /076 0, /116 1, /156 1, /026 0, /036 0, /036 0, /056 0, /076 0, /116 1, /116 1, /156 1, /226 2, /036 0, /056 0, /076 0, /116 1, /116 1, /156 1, /226A 2, /226 2, / /076 0, /116A 1, /116 1, /156 1, /156 1, /226 2, / / /556 5, /226A 2, /226 2, / / /556 5, /756 7, /926 9,2 - sh-4p60-en_b_tem = Available sh-2p60-en_b_tem 8

9 SHE - SHE4 SERIES LIST OF MODELS AND TABLE OF MATERIALS VERSION 2 POLE 4 POLE SHE /116 SHE /056 SHE /156 SHE /076 SHE /226 SHE /116 SHE /306 SHE /156 SHE /406 SHE /056 SHE /556 SHE /076 SHE /756 SHE /116 SHE /1106 SHE /156 SHE /116 SHE /056 SHE /156 SHE /076 SHE /226 SHE /116 SHE /306 SHE /116 SHE /406 SHE /156 SHE /556 SHE /226 SHE /756 SHE /056 SHE /1106 SHE /076 SHE /156 SHE /116 SHE /226 SHE /116 SHE /306 SHE /156 SHE /406 SHE /226A SHE /556 SHE /226A SHE /756 SHE /306 SHE /926 SHE /076 SHE /1106 SHE /116A SHE /306 SHE /116A SHE /406 SHE /156 SHE /556 SHE /156 SHE /756 SHE /226 SHE /926 SHE /306 SHE /1106 SHE /406 SHE /556 SHE /556 SHE /756 SHE /226A SHE /926 SHE /226A SHE /1106 SHE /306 SHE /406 SHE /556 SHE /756 SHE /926 sh-she-she4-p-60-en_b_mo REF. NAME MATERIAL REFERENCE STANDARDS N EUROPE USA 1 Pump body Stainless steel EN X2CrNiMo (1.4404) AISI 316L Impeller (160) Stainless steel EN X2CrNiMo (1.4404) AISI 316L 2 Impeller 65( )-80 Stainless steel EN GX5CrNiMo (1.4408) ASTM CF8M (cast 316 ) 3 Seal housing disk Stainless steel EN X2CrNiMo (1.4404) AISI 316L 4 Wear ring Stainless steel EN X2CrNiMo (1.4404) AISI 316L 5 Counterwear ring Stainless steel EN X2CrNiMo (1.4404) AISI 316L 6 Shaft extension Stainless steel EN X5CrNiMo (1.4401) AISI Rigid shaft coupling Stainless steel EN X5CrNiMo (1.4401) AISI Impeller locknut and washer Stainless steel EN X5CrNiMo (1.4401) AISI Tab Stainless steel EN X2CrNiMo (1.4404) AISI 316L 10 Fill drain plugs Stainless steel EN X5CrNiMo (1.4401) AISI Mechanical seal Ceramic / Carbon / FPM (standard version) 12 Elastomers FPM (standard version) 13 Adapter * Aluminium EN 1706-AC-AlSi11Cu2 (Fe) (AC46100) - Adapter Cast iron EN 1561-GJL-200 (JL1030) ASTM Class Pump body fastening bolts & screws Zinc plated steel * For the 25/32/ /4 pole,25/32/ /4 pole,25/32/ /4 pole versions sh-she-60-en_b_tm 9

10 SHE - SHE4 SERIES LIST OF MODELS AND TABLE OF MATERIALS VERSION 2 POLE SHE /1506 SHE /1506 SHE /1856 SHE /2206 SHE /1506 SHE /1856 SHE /2206 SHE /1506 SHE /1856 SHE /2206 sh-she-s-60-en_a_mo VERSION 4 POLE SHE /026 SHE /026 SHE /036 SHE /036 SHE /026 SHE /026 SHE /036 SHE /036 SHE /026 SHE /036 SHE /036 SHE /036 sh-she4-p-60-en_b_mo REF. NAME MATERIAL REFERENCE STANDARDS N EUROPE USA 1 Pump body Stainless steel EN X2CrNiMo (1.4404) AISI 316L Impeller (160) Stainless steel EN X2CrNiMo (1.4404) AISI 316L 2 Impeller 65( )-80 Stainless steel EN GX5CrNiMo (1.4408) ASTM CF8M (cast 316 ) 3 Seal housing disk Stainless steel EN X2CrNiMo (1.4404) AISI 316L 4 Wear ring Stainless steel EN X2CrNiMo (1.4404) AISI 316L 5 Counterwear ring Stainless steel EN X2CrNiMo (1.4404) AISI 316L 6 Shaft extension Stainless steel EN X5CrNiMo (1.4401) AISI Rigid shaft coupling Stainless steel EN X5CrNiMo (1.4401) AISI Impeller locknut and washer Stainless steel EN X5CrNiMo (1.4401) AISI Tab Stainless steel EN X2CrNiMo (1.4404) AISI 316L 10 Fill drain plugs Stainless steel EN X5CrNiMo (1.4401) AISI Mechanical seal Ceramic / Carbon / FPM (standard version) 12 Elastomers FPM (standard version) 13 Adapter * Aluminium EN 1706-AC-AlSi11Cu2 (Fe) (AC46100) - Adapter Cast iron EN 1561-GJL-200 (JL1030) ASTM Class Pump body fastening bolts & screws Zinc plated steel * For the 25/32/ /4 pole,25/32/ /4 pole,25/32/ /4 pole versions sh-she-60-en_b_tm 10

11 SHS - SHS4 SERIES LIST OF MODELS AND TABLE OF MATERIALS VERSION 2 POLE 4 POLE SHS /116 SHS /076 SHS /156 SHS /116 SHS /226 SHS /156 SHS /306 SHS /076 SHS /406 SHS /116 SHS /556 SHS /156 SHS /756 SHS /076 SHS /116 SHS /116 SHS /156 SHS /116 SHS /226 SHS /156 SHS /306 SHS /226 SHS /406 SHS /076 SHS /556 SHS /116 SHS /756 SHS /116 SHS /156 SHS /156 SHS /226 SHS /226A SHS /306 SHS /226 SHS /406 SHS /306 SHS /556 SHS /076 SHS /756 SHS /116A SHS /306 SHS /116 SHS /406 SHS /156 SHS /556 SHS /156 SHS /756 SHS /226 SHS /556 SHS /306 SHS /756 SHS /406 SHS /556 SHS /226A SHS /226 SHS /306 SHS /406 SHS /556 SHS /756 SHS /926 sh-shs-shs4-p-60-en_b_mo REF. NAME MATERIAL REFERENCE STANDARDS N EUROPE USA 1 Pump body Stainless steel EN X2CrNiMo (1.4404) AISI 316L Impeller (160) Stainless steel EN X2CrNiMo (1.4404) AISI 316L 2 Impeller 65( )-80 Stainless steel EN GX5CrNiMo (1.4408) ASTM CF8M (cast 316 ) 3 Seal housing disk Stainless steel EN X2CrNiMo (1.4404) AISI 316L 4 Wear ring Stainless steel EN X2CrNiMo (1.4404) AISI 316L 5 Counterwear ring Stainless steel EN X2CrNiMo (1.4404) AISI 316L 7 Rigid shaft coupling Stainless steel EN X5CrNiMo (1.4401) AISI Impeller locknut and washer Stainless steel EN X5CrNiMo (1.4401) AISI Tab Stainless steel EN X2CrNiMo (1.4404) AISI 316L 10 Fill drain plugs Stainless steel EN X5CrNiMo (1.4401) AISI Mechanical seal Ceramic / Carbon / FPM (standard version) 12 Elastomers FPM (standard version) 13 Adapter * Aluminium EN 1706-AC-AlSi11Cu2 (Fe) (AC46100) - Adapter Cast iron EN 1561-GJL-200 (JL1030) ASTM Class Adapter motor coupling Cast iron EN 1561-GJL-200 (JL1030) ASTM Class Pump body fastening bolts & screws Zinc plated steel * For the 25/32/ /4 pole,25/32/ /4 pole,25/32/ /4 pole versions sh-shs-60-en_b_tm 11

12 SHS SERIES LIST OF MODELS AND TABLE OF MATERIALS VERSION 2 POLE SHS /1106 SHS /1106 SHS /1106A SHS /1106A SHS /1506 SHS /1106A SHS /1106 SHS /1506 SHS /1856 SHS /2206 SHS /1106A SHS /1106 SHS /1506 SHS /1856 SHS /2206 SHS /3006 SHS /3706 SHS /1506 SHS /1856 SHS /2206 SHS /3006 SHS /3706 sh-shs-s-60-en_b_mo REF. NAME MATERIAL REFERENCE STANDARDS N EUROPE USA 1 Pump body Stainless steel EN X2CrNiMo (1.4404) AISI 316L Impeller (160) Stainless steel EN X2CrNiMo (1.4404) AISI 316L 2 Impeller 65( )-80 Stainless steel EN GX5CrNiMo (1.4408) ASTM CF8M (cast 316 ) 3 Seal housing disk Stainless steel EN X2CrNiMo (1.4404) AISI 316L 4 Wear ring Stainless steel EN X2CrNiMo (1.4404) AISI 316L 5 Counterwear ring Stainless steel EN X2CrNiMo (1.4404) AISI 316L 7 Rigid shaft coupling Stainless steel EN X5CrNiMo (1.4401) AISI Impeller locknut and washer Stainless steel EN X5CrNiMo (1.4401) AISI Tab Stainless steel EN X2CrNiMo (1.4404) AISI 316L 10 Fill drain plugs Stainless steel EN X5CrNiMo (1.4401) AISI Mechanical seal Ceramic / Carbon / FPM (standard version) 12 Elastomers FPM (standard version) 13 Adapter * Aluminium EN 1706-AC-AlSi11Cu2 (Fe) (AC46100) - Adapter Cast iron EN 1561-GJL-200 (JL1030) ASTM Class Adapter motor coupling Cast iron EN 1561-GJL-200 (JL1030) ASTM Class Pump body fastening bolts & screws Zinc plated steel * For the 25/32/ /4 pole,25/32/ /4 pole,25/32/ /4 pole versions sh-shs-60-en_b_tm 12

13 SHF BARE SHAFT SERIES LIST OF MODELS AND TABLE OF MATERIALS VERSION SHF SHF SHF SHF SHF SHF SHF SHF SHF SHF SHF SHF SHF SHF SHF SHF SHF SHF SHF SHF SHF SHF sh-shf-p-60-en_b_mo REF. NAME MATERIAL REFERENCE STANDARDS N EUROPE USA 1 Pump body Stainless steel EN X2CrNiMo (1.4404) AISI 316L Impeller (160) Stainless steel EN X2CrNiMo (1.4404) AISI 316L 2 Impeller 65( )-80 Stainless steel EN GX5CrNiMo (1.4408) ASTM CF8M (cast 316 ) 3 Seal housing disk Stainless steel EN X2CrNiMo (1.4404) AISI 316L 4 Wear ring Stainless steel EN X2CrNiMo (1.4404) AISI 316L 5 Counterwear ring Stainless steel EN X2CrNiMo (1.4404) AISI 316L 6 Shaft extension Stainless steel EN X5CrNiMo (1.4401) AISI Impeller locknut and washer Stainless steel EN X5CrNiMo (1.4401) AISI Tab Stainless steel EN X2CrNiMo (1.4404) AISI 316L 10 Fill drain plugs Stainless steel EN X5CrNiMo (1.4401) AISI Mechanical seal Ceramic / Carbon / FPM (standard version) 12 Elastomers FPM (standard version) 13 Adapter * Aluminium EN 1706-AC-AlSi11Cu2 (Fe) (AC46100) - Adapter Cast iron EN 1561-GJL-200 (JL1030) ASTM Class Support body Cast iron EN 1561-GJL-200 (JL1030) ASTM Class Pump body fastening bolts & screws Zinc plated steel * For the 25/32/ /4 pole,25/32/ /4 pole,25/32/ /4 pole versions sh-shf-60-en_b_tm 13

14 SH MECHANICAL SEAL, ACCORDING TO EN Mechanical seal mounting dimensions according to EN12756 (ex DIN 24960) and ISO FIG. 1 (*) FIG. 2 (**) (*) Standard Version (**) Version with anti-rotation lockpin is available on request LIST OF MATERIALS POSITION 1-2 POSITION 3 POSITION 4-5 B : Resin impregnated carbon E : EPDM G : AISI 316 Q 1 : Silicon carbide V : FPM V : Ceramic sh_ten-mec-60_a_tm SEALS TYPE TYPE POSITION ROTATING ASSEMBLY FIXED ASSEMBLY ELASTOMERS SPRINGS OTHER COMPONENTS TEMPERATURE STANDARD MECHANICAL SEAL V B V G G V B V G G OTHER TYPE OF MECHANICAL SEAL Q 1 B V G G Q 1 B V G G Q 1 Q 1 V G G Q 1 Q 1 V G G V B E G G V B E G G Q 1 B E G G Q 1 B E G G Q 1 Q 1 E G G Q 1 Q 1 E G G ( C ) sh_tipi-ten-mec-60_a_tc PRESSURE / TEMPERATURE APPLICATION LIMITS FOR COMPLETE PUMP (WITH ANY OF THE SEALS LISTED ABOVE) 14

15 MOTORS Lowara Squirrel cage motor in short circuit (TEFC), aluminum casing, enclosed construction with external ventilation. The standard supply features Lowara motors for powers up to 7,5 kw (included) in the 4-pole version, and up to 22 kw (included) in the 2-pole version. Other motor brands are used for higher powers. The Lowara surface motors have efficiency values that fall within the range normally referred to as efficiency class 2. Cooling is ensured by a fan according to EN The terminal box is made of ABS technical polymer for motor sizes up to IM 100, and of aluminum alloy for bigger sizes. The cable gland has standard passage dimensions according to EN (metric size) for SM motors, and according to DIN (Pg size) for LM motors. The standard protection is IP 55, insulation class F. Standard voltage: 2-pole motors, single phase: 220/230 V, 60 Hz 2 and 4 pole motors, three phase: 220/380 V, 60 Hz SHE SERIES SINGLE-PHASE 60 Hz, 2-POLE MOTORS MOTOR TYPE INPUT CURRENT CAPACITOR DATA FOR 220V 60Hz IEC CONSTRUCTION In (A) Cn kw SIZE* DESIGN V µf V min -1 ls / ln n % cosϕ Nm Cs/Cn 1,1 80 B ,51 73,9 0,97 3,05 0,57 1,5 90R B ,49 76,8 0,97 4,15 0,47 2,2 90 B ,98 79,0 0,96 6,14 0,48 * R =Reduced size of motor casing as compared to shaft extension and flange. she-motm-2p60-en_a_te SHE SERIES THREE-PHASE 60 Hz, 2-POLE MOTORS MOTOR TYPE INPUT CURRENT IN (A) DATA FOR 380 V 60Hz THREE-PHASE IEC CONSTRUCTION Y Cn kw SIZE* DESIGN 220 V 380 V min -1 ls / ln n % cosϕ Nm Cs/Cn 1,1 90R B14 4,16 2, ,26 79,3 0,88 3,07 2,52 1,5 90R B14 5,58 3, ,77 80,0 0,88 4,17 2,94 2,2 90R B14 7,79 4, ,31 83,4 0,89 6,14 3, B14 10,9 6, ,34 80,3 0,91 8,43 1, R B14 14,0 8, ,12 83,4 0,90 11,0 2,06 5,5 112 B14 19,6 11, ,03 82,3 0,90 15,1 1,90 7,5 112 B14 26,0 15, ,69 84,9 0,89 20,6 2,11 9,2 132 B14 31,2 18, ,40 83,9 0,93 25,1 2, B , ,11 87,4 0,92 29,9 2, B , ,68 83,2 0,92 40,7 2,29 18,5 160 B , ,90 84,2 0,93 50,3 3, R B , ,88 87,2 0,92 59,7 3,55 * R =Reduced size of motor casing as compared to shaft extension and flange. sh-she-mott-2p60-en_a_te 15

16 SHS-SHF SERIES THREE-PHASE 60 Hz, 2-POLE MOTORS MOTOR TYPE INPUT CURRENT IN (A) DATA FOR 380 V 60Hz CONSTRUCTION THREE-PHASE IEC DESIGN Y Cn kw SIZE* SHS SHF 220 V 380 V min -1 ls / ln n % cosϕ Nm Cs/Cn 1,1 80 B5 B3 4,16 2, ,26 79,3 0,88 3,07 2,52 1,5 90R B5-5,58 3, ,77 80,0 0,88 4,17 2,94 1, B3 5,72 3, ,14 77,4 0,89 4,17 1,71 2,2 90R B5-7,79 4, ,31 83,4 0,89 6,14 3,20 2, B3 7,88 4, ,67 82,0 0,90 6,12 2, R B5-10,9 6, ,34 80,3 0,91 8,43 1, B3 11,1 6, ,25 79,0 0,90 8,35 1, R B5-14,0 8, ,12 83,4 0,90 11,0 2, B3 14,5 8, ,75 80,8 0,90 11,0 1,92 5,5 132R B5-19,6 11, ,03 82,3 0,90 15,1 1,90 5, B3 19,7 11, ,17 80,3 0,91 15,2 1,70 7,5 132R B , ,69 84,9 0,89 20,6 2,11 7, B , ,93 82,6 0,92 20,6 1, B35 B , ,38 79,4 0,91 29,9 2, B35 B , ,68 83,2 0,92 40,7 2,29 18,5 160 B35 B , ,90 84,2 0,93 50,3 3, R B , ,88 87,2 0,92 59,7 3, B ,5 90,8 0, , B35 B ,3 92,5 0, , B35 B ,6 92,9 0, , B ,1 92,9 0, , B ,2 93 0, , B ,3 93,8 0, ,3 * R =Reduced size of motor casing as compared to shaft extension and flange. sh-shs-shf-mott-2p60-en_a_te 16

17 SHE4 SERIES THREE-PHASE 60 Hz, 4-POLE MOTORS MOTOR TYPE INPUT CURRENT IN (A) DATA FOR 380V 60Hz THREE-PHASE IEC CONSTRUCTION Y Cn kw SIZE DESIGN 220 V 380 V min -1 ls / ln n % cosϕ Nm Cs/Cn 0,25 71 B5 1,51 0, ,45 64,8 0,68 1,45 2,37 0,37 71 B5 2,18 1, ,52 65,5 0,68 2,17 2,65 0,55 90R B14 2,74 1, ,55 68,9 0,77 3,18 1,80 0,75 90R B5 3,62 2, ,92 71,8 0,76 4,32 2,09 1,1 90 B5 4,54 2, ,65 75,2 0,85 6,29 1,55 1,5 90 B5 5,80 3, ,26 80,2 0,85 8,48 1,71 2,2 100 B5 8,21 4, ,43 80,9 0,87 12,5 1, B5 10,9 6, ,06 83,5 0,87 16,8 1, B5 14,5 8, ,21 84,1 0,86 22,4 1,96 5,5 132 B14 19,7 11, ,58 86,4 0,85 30,4 1,90 7,5 132 B14 26,8 15, ,40 87,0 0,84 41,4 2,14 9,2 132 B14 33,1 19, ,49 89,5 0,82 50,3 2,87 sh-she4-mott-4p60-en_a_te SHS4 - SHF4 SERIES THREE-PHASE 60 Hz, 4-POLE MOTORS MOTOR TYPE INPUT CURRENT IN (A) DATA FOR 380V 60Hz CONSTRUCTION THREE-PHASE IEC DESIGN Y Cn kw SIZE SHS4 SHF4 220 V 380 V min -1 ls / ln n % cosϕ Nm Cs/Cn 0, B3 1,51 0, ,45 64,8 0,68 1,45 2,37 0, B3 2,18 1, ,52 65,5 0,68 2,17 2,65 0,55 80 B5 B3 2,74 1, ,55 68,9 0,77 3,18 1,80 0,75 80 B5 B3 3,62 2, ,92 71,8 0,76 4,32 2,09 1,1 90 B5 B3 4,54 2, ,65 75,2 0,85 6,29 1,55 1,5 90 B5 B3 5,80 3, ,26 80,2 0,85 8,48 1,71 2,2 100 B5 B3 8,21 4, ,43 80,9 0,87 12,5 1, B5 B3 10,9 6, ,06 83,5 0,87 16,8 1, B5 B3 14,5 8, ,21 84,1 0,86 22,4 1,96 5,5 132 B5 B3 19,7 11, ,58 86,4 0,85 30,4 1,90 7,5 132 B5 B3 26,8 15, ,40 87,0 0,84 41,4 2,14 9,2 132 B5-33,1 19, ,49 89,5 0,82 50,3 2,87 sh-shs4-shf4-mott-4p60-en_a_te 17

18 MOTOR NOISE The tables list the sound pressure values (Lp) measured as per Curve A (according to ISO standard 1680). Noise values were measured with the 60 Hz motor running idle with a tolerance of 3 db (A). Lowara SHE-SHS MOTORS 2-POLE 2-POLE 60Hz 60Hz SHF MOTORS 2-POLE 2-POLE 60Hz 60Hz POWER MOTOR TYPE NOISE POWER MOTOR TYPE IEC* LpA IEC* kw SIZE db kw SIZE 1,1 90R <70 1,1 80 1,5 90R <70 1,5 90 2,2 90R 70 2, R , , , , , , , NOISE LpA db <70 < SHE4-SHS4 MOTORS SHF4 MOTORS SHE4-SHS4 MOTORS SHF4 MOTORS 4-POLE 60Hz 4-POLE 60Hz 4-POLE 60Hz 4-POLE 60Hz POWER MOTOR TYPE NOISE POWER MOTOR TYPE IEC* LpA IEC* kw SIZE db kw SIZE 0,25 71 <70 0, ,37 71 <70 0, ,55 90R <70 0, ,75 90R <70 0, ,1 90 <70 1,1 90 1,5 90 <70 1,5 90 2,2 100 <70 2, < < ,5 132 <70 5, ,5 132 <70 7, ,2 132 < *R=reduced motor casing size with respect to shaft extension and related flange. NOISE LpA db <70 <70 <70 <70 <70 <70 <70 <70 <70 <70 <70 - sh_sh_mott-60hz-en_a_tr 18

19 19 Lowara

20 SHE-SHS-SHF SERIES HYDRAULIC PERFORMANCE RANGE AT 60 Hz, 2 POLES Lowara These performances are valid for liquids with density ρ=1,0 kg/dm 3 and kinematic viscosity υ =1 mm 2 /sec. 20

21 SHE-SHS-SHF SERIES HYDRAULIC PERFORMANCE TABLE AT 60 Hz, 2 POLES Lowara PUMP RATED Q = CAPACITY TYPE POWER l/min m 3 /h kw HP H =TOTAL HEAD IN METRES OF COLUMN OF WATER /116 * 1,1 1,5 21,4 18,1 16,1 13,7 11, /156 * 1,5 2 28,1 24,6 22,2 19,4 16,2 8, /226 * 2,2 3 36,2 32,8 30,5 27,7 24,5 17,2 13, / ,5 40,9 37,4 33,2 28,3 16, / ,5 55,3 50,7 47,6 43,8 39,3 28, /556 5,5 7,5 63,2 57,6 54,9 51,8 48,1 38, /756 7, ,6 68,8 66,4 63, , / ,8 84,4 81,6 78,4 74, /116 * 1,1 1,5 20,6 17,8 16,1 14,2 12,1 7, /156 * 1,5 2 27,8 23,8 21,7 19,3 16, /226 * 2,2 3 34, ,8 26,4 23,6 17,2 13, / ,6 42,4 39,3 35,7 31,5 21, / ,5 55, , ,8 23, /556 5,5 7,5 61, ,3 50,3 46,8 38, /756 7, , ,3 62, , / ,4 80, ,6 63, /156 * 1, ,6 13,4 8, /226 * 2,2 3 22,8 20,5 18,7 19,5 14,2 11, / ,7 29, ,4 20, / ,5 36,4 34, ,7 25,6 21,6 16, /556 5,5 7,5 48,1 45,2 42, ,5 28, /756 7, ,2 55, , ,4 32, / ** ** ** 64, , ,5 40, / ,5 69, ,8 57, / , , / ,2 18,5 17, ,5 13 9, / ,5 26,9 23,6 22, , , /556 5,5 7,5 32,5 29,8 28,7 27, ,8 19, /756 7, ,3 37,8 36, ,5 31,7 27,6 19, / ** ** ** 49,4 47,2 45,5 43, , / , ,5 46,3 43, , / ,7 65, , , / , , ,5 57, / ,5 84, , /556 5,5 7, , ,2 17,5 14,6 11, /756 7, ,7 25, ,2 22,4 19, , / ** ** ** 38, ,7 31,8 26,5 20, / ,7 41,4 40, , , / , , , / , ,2 58, ,5 47, , / ,4 65, , / ,5 82, / ,5 94, / ,5 36,5 34,5 32,5 30, / , ,3 43,3 41, , / , , / ,5 63, ,5 48,5 41, / ,5 70, ,5 55, /4506*** , , /5506*** , ,5 87, /7506*** * Available single-phase motor version she-shs-shf-2p60_c_th ** /926 = 9.2kW HP in the SHE version ** /1106 = 11kW - 15HP in the SHS version *** SHF version only Performances in compilance with ISO 9906-Annex A 21

22 SHE4-SHS4-SHF4 SERIES HYDRAULIC PERFORMANCE RANGE AT 60 Hz, 4 POLES Lowara These performances are valid for liquids with density ρ=1,0 kg/dm 3 and kinematic viscosity υ =1 mm 2 /sec. 22

23 SHE4-SHS4-SHF4 SERIES HYDRAULIC PERFORMANCE TABLE AT 60 Hz, 4 POLES Lowara PUMP RATED Q = CAPACITY TYPE POWER l/min m 3 /h 0 4,5 6 7, kw HP H =TOTAL HEAD IN METRES OF COLUMN OF WATER /026 * 0,25 0,33 6,3 5,6 5,2 4,6 4 2, /026 * 0,25 0,33 8,1 7,3 6,8 6,1 5,4 3, /036 * 0,37 0,5 9,9 9,1 8,6 8 7,2 5, /036 * 0,37 0,5 11,4 9,9 9 7,9 6,7 3, /056 * 0,55 0,75 13,6 12,3 11,5 10,5 9,3 6, /076 0, ,6 15,1 14,3 13,5 12,6 10,3 7, /116 1,1 1,5 20,4 18, ,1 16,2 13,9 11, /156 1,5 2 22,1 20,7 19,9 19,1 18,1 15,9 13, /026 * 0,25 0,33 6,3 5,6 5,2 4,7 4, /026 * 0,25 0,33 8,2 7,3 6,8 6,2 5, /036 * 0,37 0,5 9,9 9,1 8,6 8 7,3 5, /036 * 0,37 0,5 11,7 10,3 9,5 8,5 8, /056 * 0,55 0,75 13,6 12,2 11,4 10,5 10, /076 0, ,9 15,3 14,6 13,7 12,7 10,4 7, /116 1,1 1,5 20, ,3 17,4 16,5 14,4 11, /156 1,5 2 22,3 20,8 20,2 19,4 18,5 16,4 13, /026 * 0,25 0,33 5,2 4,6 4,2 3,7 3,1 2,5 1, /036 * 0,37 0,5 6,8 6,2 5,8 5, , /036 * 0,37 0,5 7,7 6,8 6,1 5,3 4,3 3 2, /056 * 0,55 0,75 9,2 8,4 7,7 6,9 5,9 4,8 3, /076 0, ,7 10,8 10,1 9,2 8 6, /116 1,1 1,5 14,6 13,6 12,9 11,9 10,8 9,4 7, /116 1,1 1,5 15,5 14,4 13,7 12,7 11,3 9, /156 1,5 2 17,6 16,6 15,9 14,9 13,6 12 9, /226 2, ,1 21,5 20,6 19,5 17,9 16, /036 * 0,37 0,5 5,6 4,4 4,1 3,7 3,4 3 2, /056 * 0,55 0,75 6,7 5,6 5,3 5 4,6 4,2 3, /076 0,75 1 8,8 7,5 7,2 6,8 6,3 5,9 4, /116 1,1 1,5 10,3 9,1 8,7 8,4 7,9 7,4 6,3 4, /116 1,1 1,5 12,1 11,2 10,7 10,2 9,6 8,9 7, /156 1,5 2 14,7 13,7 13,3 12,7 12,1 11,4 9,7 6, /226A 2,2 3 17,4 15,9 15,3 14,8 14,1 13,3 11, /226 2,2 3 21,1 19,6 19,1 18,5 17, / ,4 23,3 22,8 22,4 21, ,2 15, /076 0,75 1 5,8 5,4 5,3 5 4,5 3, /116A 1,1 1,5 6,8 6,4 6,2 6 5,5 4,7 3, / 116 1,1 1,5 9,9 8,7 8,3 8 7,3 6,1 3, /156 1,5 2 11,2 10 9,7 9,4 8,7 7, /156 1,5 2 13,4 11, ,1 8,6 5, /226 2,2 3 15,9 13,8 13,3 12,5 11 7, / ,1 16,8 15,8 14,3 11,4 8, / , , /556 5,5 7,5 27,7 25,4 24,3 22, , /226A 2,2 3 10,4 9,1 8,6 7,5 6,6 5 3, /226 2,2 3 11,6 10,3 9,7 8,7 7,7 6 4, / ,5 11,4 11,4 9,5 7, / , ,6 12,4 13,5 11,7 9, /556 5,5 7,5 20,9 19, ,6 14,4 11, /756 7,5 1 27,2 25,8 24,5 23,1 20,7 17,7 13, /926** 9,2 12,5 30, ,6 26,3 23,8 20,9 16,6 * SHE4 - SHF versions only she4-shs4-shf4-4p60_c_th ** SHE4 - SHS4 versions only Performances in compilance with ISO 9906-Annex A 23

24 SHE-SHS-SHF SERIES OPERATING CHARACTERISTICS AT 60 Hz, 2 POLES The NPSH values are laboratory values; for practical use we suggest increasing these values by 0.5 m. These performances are valid for liquids with density ρ=1.0 kg/dm 3 and kinematic viscosity υ =1 mm 2 /sec. 24

25 SHE-SHS-SHF SERIES OPERATING CHARACTERISTICS AT 60 Hz, 2 POLES The NPSH values are laboratory values; for practical use we suggest increasing these values by 0.5 m. These performances are valid for liquids with density ρ=1.0 kg/dm 3 and kinematic viscosity υ =1 mm 2 /sec. 25

26 SHE-SHS-SHF SERIES OPERATING CHARACTERISTICS AT 60 Hz, 2 POLES The NPSH values are laboratory values; for practical use we suggest increasing these values by 0.5 m. These performances are valid for liquids with density ρ=1.0 kg/dm 3 and kinematic viscosity υ =1 mm 2 /sec. 26

27 SHE-SHS-SHF SERIES OPERATING CHARACTERISTICS AT 60 Hz, 2 POLES The NPSH values are laboratory values; for practical use we suggest increasing these values by 0.5 m. These performances are valid for liquids with density ρ=1.0 kg/dm 3 and kinematic viscosity υ =1 mm 2 /sec. 27

28 SHE-SHS-SHF SERIES OPERATING CHARACTERISTICS AT 60 Hz, 2 POLES The NPSH values are laboratory values; for practical use we suggest increasing these values by 0.5 m. These performances are valid for liquids with density ρ=1.0 kg/dm 3 and kinematic viscosity υ =1 mm 2 /sec. 28

29 SHE-SHS-SHF SERIES OPERATING CHARACTERISTICS AT 60 Hz, 2 POLES The NPSH values are laboratory values; for practical use we suggest increasing these values by 0.5 m. These performances are valid for liquids with density ρ=1.0 kg/dm 3 and kinematic viscosity υ =1 mm 2 /sec. 29

30 SHE-SHS-SHF SERIES OPERATING CHARACTERISTICS AT 60 Hz, 2 POLES The NPSH values are laboratory values; for practical use we suggest increasing these values by 0.5 m. These performances are valid for liquids with density ρ=1.0 kg/dm 3 and kinematic viscosity υ =1 mm 2 /sec. 30

31 SHE-SHS-SHF SERIES OPERATING CHARACTERISTICS AT 60 Hz, 2 POLES The NPSH values are laboratory values; for practical use we suggest increasing these values by 0.5 m. These performances are valid for liquids with density ρ=1.0 kg/dm 3 and kinematic viscosity υ =1 mm 2 /sec. 31

32 SHE-SHS-SHF SERIES OPERATING CHARACTERISTICS AT 60 Hz, 2 POLES The NPSH values are laboratory values; for practical use we suggest increasing these values by 0.5 m. These performances are valid for liquids with density ρ=1.0 kg/dm 3 and kinematic viscosity υ =1 mm 2 /sec. 32

33 SHE-SHS-SHF SERIES OPERATING CHARACTERISTICS AT 60 Hz, 2 POLES The NPSH values are laboratory values; for practical use we suggest increasing these values by 0.5 m. These performances are valid for liquids with density ρ=1.0 kg/dm 3 and kinematic viscosity υ =1 mm 2 /sec. 33

34 SHE-SHS-SHF SERIES OPERATING CHARACTERISTICS AT 60 Hz, 2 POLES The NPSH values are laboratory values; for practical use we suggest increasing these values by 0.5 m. These performances are valid for liquids with density ρ=1.0 kg/dm 3 and kinematic viscosity υ =1 mm 2 /sec. 34

35 SHE-SHS-SHF SERIES OPERATING CHARACTERISTICS AT 60 Hz, 2 POLES The NPSH values are laboratory values; for practical use we suggest increasing these values by 0.5 m. These performances are valid for liquids with density ρ=1.0 kg/dm 3 and kinematic viscosity υ =1 mm 2 /sec. 35

36 SHE-SHS-SHF SERIES OPERATING CHARACTERISTICS AT 60 Hz, 2 POLES The NPSH values are laboratory values; for practical use we suggest increasing these values by 0.5 m. These performances are valid for liquids with density ρ=1.0 kg/dm 3 and kinematic viscosity υ =1 mm 2 /sec. 36

37 SHE-SHS-SHF SERIES OPERATING CHARACTERISTICS AT 60 Hz, 2 POLES The NPSH values are laboratory values; for practical use we suggest increasing these values by 0.5 m. These performances are valid for liquids with density ρ=1.0 kg/dm 3 and kinematic viscosity υ =1 mm 2 /sec. 37

38 SHE-SHS-SHF SERIES OPERATING CHARACTERISTICS AT 60 Hz, 2 POLES The NPSH values are laboratory values; for practical use we suggest increasing these values by 0.5 m. These performances are valid for liquids with density ρ=1.0 kg/dm 3 and kinematic viscosity υ =1 mm 2 /sec. 38

39 SHE-SHS-SHF SERIES OPERATING CHARACTERISTICS AT 60 Hz, 2 POLES The NPSH values are laboratory values; for practical use we suggest increasing these values by 0.5 m. These performances are valid for liquids with density ρ=1.0 kg/dm 3 and kinematic viscosity υ =1 mm 2 /sec. 39

40 SHE-SHS-SHF SERIES OPERATING CHARACTERISTICS AT 60 Hz, 2 POLES The NPSH values are laboratory values; for practical use we suggest increasing these values by 0.5 m. These performances are valid for liquids with density ρ=1.0 kg/dm 3 and kinematic viscosity υ =1 mm 2 /sec. 40

41 SHE-SHS-SHF SERIES OPERATING CHARACTERISTICS AT 60 Hz, 2 POLES The NPSH values are laboratory values; for practical use we suggest increasing these values by 0.5 m. These performances are valid for liquids with density ρ=1.0 kg/dm 3 and kinematic viscosity υ =1 mm 2 /sec. 41

42 SHE-SHS-SHF SERIES OPERATING CHARACTERISTICS AT 60 Hz, 2 POLES The NPSH values are laboratory values; for practical use we suggest increasing these values by 0.5 m. These performances are valid for liquids with density ρ=1.0 kg/dm 3 and kinematic viscosity υ =1 mm 2 /sec. 42

43 SHS-SHF SERIES OPERATING CHARACTERISTICS AT 60 Hz, 2 POLES The NPSH values are laboratory values; for practical use we suggest increasing these values by 0.5 m. These performances are valid for liquids with density ρ=1.0 kg/dm 3 and kinematic viscosity υ =1 mm 2 /sec. 43

44 SHE-SHS-SHF SERIES OPERATING CHARACTERISTICS AT 60 Hz, 2 POLES The NPSH values are laboratory values; for practical use we suggest increasing these values by 0.5 m. These performances are valid for liquids with density ρ=1.0 kg/dm 3 and kinematic viscosity υ =1 mm 2 /sec. 44

45 SHE-SHS-SHF SERIES OPERATING CHARACTERISTICS AT 60 Hz, 2 POLES The NPSH values are laboratory values; for practical use we suggest increasing these values by 0.5 m. These performances are valid for liquids with density ρ=1.0 kg/dm 3 and kinematic viscosity υ =1 mm 2 /sec. 45

46 SERIE SHF OPERATING CHARACTERISTICS AT 60 Hz, 2 POLES The NPSH values are laboratory values; for practical use we suggest increasing these values by 0.5 m. These performances are valid for liquids with density ρ=1.0 kg/dm 3 and kinematic viscosity υ =1 mm 2 /sec. 46

47 SHE4-SHF4 SERIES OPERATING CHARACTERISTICS AT 60 Hz, 4 POLES The NPSH values are laboratory values; for practical use we suggest increasing these values by 0.5 m. These performances are valid for liquids with density ρ=1.0 kg/dm 3 and kinematic viscosity υ =1 mm 2 /sec. 47

48 SHE4-SHF4 SERIES OPERATING CHARACTERISTICS AT 60 Hz, 4 POLES The NPSH values are laboratory values; for practical use we suggest increasing these values by 0.5 m. These performances are valid for liquids with density ρ=1.0 kg/dm 3 and kinematic viscosity υ =1 mm 2 /sec. 48

49 SHE4-SHF4 SERIES OPERATING CHARACTERISTICS AT 60 Hz, 4 POLES The NPSH values are laboratory values; for practical use we suggest increasing these values by 0.5 m. These performances are valid for liquids with density ρ=1.0 kg/dm 3 and kinematic viscosity υ =1 mm 2 /sec. 49

50 SHE4-SHS4-SHF4 SERIES OPERATING CHARACTERISTICS AT 60 Hz, 4 POLES The NPSH values are laboratory values; for practical use we suggest increasing these values by 0.5 m. These performances are valid for liquids with density ρ=1.0 kg/dm 3 and kinematic viscosity υ =1 mm 2 /sec. 50

51 SHE4-SHF4 SERIES OPERATING CHARACTERISTICS AT 60 Hz, 4 POLES The NPSH values are laboratory values; for practical use we suggest increasing these values by 0.5 m. These performances are valid for liquids with density ρ=1.0 kg/dm 3 and kinematic viscosity υ =1 mm 2 /sec. 51

52 SHE4-SHF4 SERIES OPERATING CHARACTERISTICS AT 60 Hz, 4 POLES The NPSH values are laboratory values; for practical use we suggest increasing these values by 0.5 m. These performances are valid for liquids with density ρ=1.0 kg/dm 3 and kinematic viscosity υ =1 mm 2 /sec. 52

53 SHE4-SHF4 SERIES OPERATING CHARACTERISTICS AT 60 Hz, 4 POLES The NPSH values are laboratory values; for practical use we suggest increasing these values by 0.5 m. These performances are valid for liquids with density ρ=1.0 kg/dm 3 and kinematic viscosity υ =1 mm 2 /sec. 53

54 SHE4-SHS4-SHF4 SERIES OPERATING CHARACTERISTICS AT 60 Hz, 4 POLES The NPSH values are laboratory values; for practical use we suggest increasing these values by 0.5 m. These performances are valid for liquids with density ρ=1.0 kg/dm 3 and kinematic viscosity υ =1 mm 2 /sec. 54

55 SHE4-SHF4 SERIES OPERATING CHARACTERISTICS AT 60 Hz, 4 POLES The NPSH values are laboratory values; for practical use we suggest increasing these values by 0.5 m. These performances are valid for liquids with density ρ=1.0 kg/dm 3 and kinematic viscosity υ =1 mm 2 /sec. 55

56 SHE4-SHF4 SERIES OPERATING CHARACTERISTICS AT 60 Hz, 4 POLES The NPSH values are laboratory values; for practical use we suggest increasing these values by 0.5 m. These performances are valid for liquids with density ρ=1.0 kg/dm 3 and kinematic viscosity υ =1 mm 2 /sec. 56

57 SHE4-SHS4-SHF4 SERIES OPERATING CHARACTERISTICS AT 60 Hz, 4 POLES The NPSH values are laboratory values; for practical use we suggest increasing these values by 0.5 m. These performances are valid for liquids with density ρ=1.0 kg/dm 3 and kinematic viscosity υ =1 mm 2 /sec. 57

58 SHE4-SHS4-SHF4 SERIES OPERATING CHARACTERISTICS AT 60 Hz, 4 POLES The NPSH values are laboratory values; for practical use we suggest increasing these values by 0.5 m. These performances are valid for liquids with density ρ=1.0 kg/dm 3 and kinematic viscosity υ =1 mm 2 /sec. 58

59 SHE4-SHF4 SERIES OPERATING CHARACTERISTICS AT 60 Hz, 4 POLES The NPSH values are laboratory values; for practical use we suggest increasing these values by 0.5 m. These performances are valid for liquids with density ρ=1.0 kg/dm 3 and kinematic viscosity υ =1 mm 2 /sec. 59

60 SHE4-SHS4-SHF4 SERIES OPERATING CHARACTERISTICS AT 60 Hz, 4 POLES The NPSH values are laboratory values; for practical use we suggest increasing these values by 0.5 m. These performances are valid for liquids with density ρ=1.0 kg/dm 3 and kinematic viscosity υ =1 mm 2 /sec. 60

61 SHE4-SHS4-SHF4 SERIES OPERATING CHARACTERISTICS AT 60 Hz, 4 POLES The NPSH values are laboratory values; for practical use we suggest increasing these values by 0.5 m. These performances are valid for liquids with density ρ=1.0 kg/dm 3 and kinematic viscosity υ =1 mm 2 /sec. 61

62 SHE4-SHS4-SHF4 SERIES OPERATING CHARACTERISTICS AT 60 Hz, 4 POLES The NPSH values are laboratory values; for practical use we suggest increasing these values by 0.5 m. These performances are valid for liquids with density ρ=1.0 kg/dm 3 and kinematic viscosity υ =1 mm 2 /sec. 62

63 SHE4-SHS4-SHF4 SERIES OPERATING CHARACTERISTICS AT 60 Hz, 4 POLES The NPSH values are laboratory values; for practical use we suggest increasing these values by 0.5 m. These performances are valid for liquids with density ρ=1.0 kg/dm 3 and kinematic viscosity υ =1 mm 2 /sec. 63

64 SHE4-SHS4-SHF4 SERIES OPERATING CHARACTERISTICS AT 60 Hz, 4 POLES The NPSH values are laboratory values; for practical use we suggest increasing these values by 0.5 m. These performances are valid for liquids with density ρ=1.0 kg/dm 3 and kinematic viscosity υ =1 mm 2 /sec. 64

65 SHE4-SHS4-SHF4 SERIES OPERATING CHARACTERISTICS AT 60 Hz, 4 POLES The NPSH values are laboratory values; for practical use we suggest increasing these values by 0.5 m. These performances are valid for liquids with density ρ=1.0 kg/dm 3 and kinematic viscosity υ =1 mm 2 /sec. 65

66 SHE4-SHS4-SHF4 SERIES OPERATING CHARACTERISTICS AT 60 Hz, 4 POLES The NPSH values are laboratory values; for practical use we suggest increasing these values by 0.5 m. These performances are valid for liquids with density ρ=1.0 kg/dm 3 and kinematic viscosity υ =1 mm 2 /sec. 66

67 SHE4-SHS4-SHF4 SERIES OPERATING CHARACTERISTICS AT 60 Hz, 4 POLES The NPSH values are laboratory values; for practical use we suggest increasing these values by 0.5 m. These performances are valid for liquids with density ρ=1.0 kg/dm 3 and kinematic viscosity υ =1 mm 2 /sec. 67

68 SHE4-SHS4-SHF4 SERIES OPERATING CHARACTERISTICS AT 60 Hz, 4 POLES The NPSH values are laboratory values; for practical use we suggest increasing these values by 0.5 m. These performances are valid for liquids with density ρ=1.0 kg/dm 3 and kinematic viscosity υ =1 mm 2 /sec. 68

69 SHE4-SHS4-SHF4 SERIES OPERATING CHARACTERISTICS AT 60 Hz, 4 POLES The NPSH values are laboratory values; for practical use we suggest increasing these values by 0.5 m. These performances are valid for liquids with density ρ=1.0 kg/dm 3 and kinematic viscosity υ =1 mm 2 /sec. 69

70 70 Lowara

71 DIMENSIONS AND WEIGHTS 71

72 SHE SERIES DIMENSIONS AND WEIGHTS 72

73 SHE SERIES DIMENSIONS AND WEIGHTS PUMP DIMENSIONS (mm) TYPE PUMP SUPPORT B H L k DNM DNA a h2 w w1 x b c c1 h1 m m1 n n1 s s1 max kg SHE / SHE / SHE / SHE / SHE / SHE / SHE / SHE / SHE / SHE / SHE / SHE / SHE / SHE / SHE / SHE / SHE / SHE / SHE / SHE / SHE / SHE / SHE / SHE / SHE / SHE / SHE / SHE / SHE / SHE / SHE / SHE / SHE / SHE / SHE / SHE / SHE / SHE / SHE / SHE / SHE / SHE / SHE / SHE / WEIGHT sh-she-2p60-en_c_td 73

74 SHE4 SERIES DIMENSIONS AND WEIGHTS 74

75 SHE4 SERIES DIMENSIONS AND WEIGHTS PUMP DIMENSIONS (mm) TYPE PUMP B H L k DNM DNA a h2 w1 x h1 n n1 max kg SHE / SHE / SHE / SHE / SHE / SHE / SHE / SHE / SHE / SHE / SHE / SHE / SHE / SHE / SHE / SHE / SHE / SHE / SHE / SHE / SHE / SHE / SHE / SHE / SHE / SHE / SHE / SHE / SHE / SHE / SHE / SHE /226A SHE / SHE / SHE / SHE /116A SHE / SHE / SHE / SHE / SHE / SHE / SHE / SHE /226A SHE / SHE / SHE / SHE / SHE / SHE / WEIGHT sh-she4-4p60-en_c_td 75