TAPE AND REEL. Tape and Reel Specifications Surface Mount for LTCXXXX, LTXXXX, LTMXXXX PRODUCTS
|
|
|
- Julie Bell
- 5 years ago
- Views:
Transcription
1 Tape and Reel Specifications Surface Mount for LTCXXXX, LTXXXX, LTMXXXX PRODUCTS Tape and Reel Packing Tape and reel packing is available for all SO, TSOT (thin SOT- 23), SOT-23 3L/4L, SOT-223, SSOP, TSSOP, QFN, DFN and DD packages in accordance with EIA Specification 481-D with the following exceptions: (DFN(DCB), TSOT and SC70 pin 1 is placed into quadrant 2. The pin 1 quadrant graphic 2 is added onto the reel and pizza box labels. For square QFN as non-compliant to Figure 2 in the EIA-481 rev. D, but LTC will follow the Flow Chart for the Rules in Figure 3). Table 1 lists the applicable tape widths, dimensions and quantities for all LTC surface mount products. Consult a sales office for tape and reel pricing and minimum order requirements. Tape and reel packaging is ordered with a #TRPBF suffix for lead free finish parts or a #TR suffix for lead based finish parts. *Packages marked with an asterisk (*) below are available in 500 unit reels through designated sales channels. 500 unit reels are ordered with a #TRMPBF or #TRM suffix. **Tape Widths marked with a double asterisk (**) converted to 8mm width in July Table 1. Tape and Reel Specifications LTC Package Code Designator LTC Package Type Number of Leads Offered W Tape Width P 1 Component Pitch P 0 Hole Pitch Reel Diameter Units per Reel DC* DFN (2mm 2mm) 3, 4, 6, 8 8/12mm** 4mm 4mm 180mm (7 ) 2,500* DCB* DFN (2mm 3mm) 6, 8 8/12mm** 4mm 4mm 180mm (7 ) 2,500* DD DFN (3mm 3mm) 8, 10, 12 12mm 8mm 4mm 330mm (13 ) 2,500 DDB* DFN (3mm 2mm) 8, 10, 12 8/12mm** 4mm 4mm 180mm (7 ) 2,500* DE, UE DFN (4mm 3mm) 12, 14 12mm 8mm 4mm 330mm (13 ) 2,500 DF DFN (4mm 4mm) 12 12mm 8mm 4mm 330mm (13 ) 2,500 DH DFN (5mm 5mm) 16 12mm 8mm 4mm 330mm (13 ) 2,500 DHC DFN (5mm 3mm) 16 12mm 8mm 4mm 330mm (13 ) 2,500 DHD DFN (5mm 4mm) 16 12mm 8mm 4mm 330mm (13 ) 2,500 DJC DFN (6mm 3mm) 22 16mm 8mm 4mm 330mm (13 ) 2,500 DKD DFN (7mm 4mm) 24, 32 16mm 8mm 4mm 330mm (13 ) 2,500 F TSSOP (4.4mm) 14, 20 16mm 8mm 4mm 330mm (13 ) 2,500 FE TSSOP (4.4mm) 16, 20, 24 16mm 8mm 4mm 330mm (13 ) 2,500 FE TSSOP (4.4mm) 28, 38 16mm 12mm 4mm 330mm (13 ) 2,000 FW TSSOP (6.1mm) 48, 56 24mm 12mm 4mm 330mm (13 ) 1,800 G SSOP (5.3mm) 16 16mm 12mm 4mm 330mm (13 ) 2,000 G SSOP (5.3mm 20, 24 16mm 12mm 4mm 330mm (13 ) 1,800 G SSOP (5.3mm 28, 36, 44, 48 24mm 12mm 4mm 330mm (13 ) 2,000 GN SSOP (0.150) 16 12mm 8mm 4mm 330mm (13 ) 2,500 GN SSOP (0.150) 20, 24, 28 16mm 8mm 4mm 330mm (13 ) 2,500 GW SSOP (7.62mm) 36, 44 24mm 12mm 4mm 330mm (13 ) 1,000 KC UTDFN (2mm 2mm) 8 8mm 8mm 4mm 180mm (7 ) 2,500 KD UTDFN (3mm 3mm) 10 12mm 8mm 4mm 330mm (13 ) 2,500 KE UTDFN (4mm 3mm) 14 12mm 8mm 4mm 330mm (13 ) 2,500 M, Q, R DD 3, 5 or 7 24mm 16mm 4mm 330mm (13 ) 750 MS8, MS8E MSOP (0.118) 8 12mm 8mm 4mm 330mm (13 ) 2,500 1
2 AND REEL SPECIFICATIONS SURFACE MOUNT Table 1. Tape and Reel Specifications (cont) LTC Package Code Designator LTC Package Type Number of Leads Offered W Tape Width P 1 Component Pitch P 0 Hole Pitch Reel Diameter Units per Reel MS, MSE MSOP (0.118) 10, 12, 16 12mm 8mm 4mm 330mm (13 ) 2,500 PD UTQFN (3mm 3mm) 16 12mm 8mm 4mm 330mm (13 ) 2,500 PDC UTQFN (3mm 4mm) 20 12mm 8mm 4mm 330mm (13 ) 2,500 PF UTQFN (4mm 4mm) 24, 28 12mm 8mm 4mm 330mm (13 ) 2,500 S8, S8E SO (0.150) 8 12mm 8mm 4mm 330mm (13 ) 2,500 S SO (0.150) 14 16mm 8mm 4mm 330mm (13 ) 2,500 S SO (0.150) 16 16mm 8mm 4mm 330mm (13 ) 2,500 ST SOT mm 12mm 4mm 330mm (13 ) 2,000 SW SO (0.300) 16 16mm 12mm 4mm 330mm (13 ) 1,000 SW SO (0.300) 18 24mm 12mm 4mm 330mm (13 ) 1,000 SW SO (0.300) 20 24mm 12mm 4mm 330mm (13 ) 1,000 SW SO (0.300) 24 24mm 12mm 4mm 330mm (13 ) 1,000 SW SO (0.300) 28 24mm 12mm 4mm 330mm (13 ) 1,000 S3* SOT mm 4mm 4mm 180mm (7 ) 2,500* S5* SOT-23, TSOT 5 8mm 4mm 4mm 180mm (7 ) 2,500* S6* SOT-23, TSOT 6 8mm 4mm 4mm 180mm (7 ) 2,500* SC6* SC70 6 8mm 4mm 4mm 180mm (7 ) 2,500* SC8* SC70 8 8mm 4mm 4mm 180mm (7 ) 2,500* TS8* TSOT 8 8mm 4mm 4mm 180mm (7 ) 2,500* UDB* QFN (3mm 2mm) 10, 12 8mm 4mm 4mm 180mm (7 ) 2,500* UD QFN (3mm 3mm) 16, 20 12mm 8mm 4mm 330mm (13 ) 2,500 UDC QFN (3mm 4mm) 18, 20, 24 12mm 8mm 4mm 330mm (13 ) 2,500 UDD QFN (3mm 5mm) 24 12mm 8mm 4mm 330mm (13 ) 2,500 UDE QFN (3mm 6mm) 28 16mm 8mm 4mm 330mm (13 ) 2,500 UF QFN (4mm 4mm) 16, 20, 24, 28 12mm 8mm 4mm 330mm (13 ) 2,500 UFD QFN (4mm 5mm) 20, 24, 28 12mm 8mm 4mm 330mm (13 ) 2,500 UFE QFN (4mm 6mm) 26, 32, 38 16mm 8mm 4mm 330mm (13 ) 2,500 UFF QFN (4mm 7mm) 34, 36, 44 16mm 8mm 4mm 330mm (13 ) 2,500 UH QFN (5mm 5mm) 20, 24, 32, 40 12mm 8mm 4mm 330mm (13 ) 2,500 UHE QFN (5mm 6mm) 28, 36, 42 16mm 8mm 4mm 330mm (13 ) 2,500 UHF QFN (5mm 7mm) 38 16mm 8mm 4mm 330mm (13 ) 2,500 UHG QFN (5mm 8mm) 39, 40, 52 16mm 8mm 4mm 330mm (13 ) 2,500 UHH QFN (5mm 9mm) 48, 56, 58 16mm 8mm 4mm 330mm (13 ) 2,500 UJ QFN (6mm 6mm) 40 16mm 12mm 4mm 330mm (13 ) 2,000 UK QFN (7mm 7mm) 44, 48 16mm 12mm 4mm 330mm (13 ) 2,000 UKG QFN (7mm 8mm) 47, 52 16mm 12mm 4mm 330mm (13 ) 2,000 UKH QFN (7mm 9mm) 64 16mm 12mm 4mm 330mm (13 ) 2,000 UKJ QFN (7mm 11mm) 64 24mm 12mm 4mm 330mm (13 ) 2,000 UKK QFN (7mm 12mm) 68 24mm 12mm 4mm 330mm (13 ) 2,000 UP QFN (9mm 9mm) 64 16mm 12mm 4mm 330mm (13 ) 2,000 WKG QFN (7mm 8mm) 52 16mm 12mm 4mm 330mm (13 ) 2,000 WP QFN (9mm 9mm) 64 16mm 12mm 4mm 330mm (13 ) 2,000 2
3 AND REEL SPECIFICATIONS SURFACE MOUNT Bending Radius Embossed Carrier Dimensions (8mm, 12mm, 16mm, 24mm Tape Only) T T 2 D 0 P 0 P 2 10 PITCHES CUMULATIVE TOLERANCE ON ±0.2mm(±0.008) E 1 R MIN TOP COVER SEE NOTE 1 A 0 F W BENDING RADIUS SEE NOTE 2 SMP 14 B B 1 K0 0 SEE NOTE 1 T 1 P 1 D EMBOSSMENT 1 FOR COMPONENTS FOR MACHINE REFERENCE ONLY 2.0mm 1.2mm INCLUDING DRAFT AND RADII CENTER LINES AND LARGER CONCENTRIC AROUND B 0 OF CAVITY SMP 12 Embossed Tape Constant Dimensions Tape Width D 0 E 1 P 0 P 2 T Max T 1 Max A 0 B 0 k 0 8mm ± ± ± See Note mm 0.0 (0.069 ± 0.004) (0.157 ± 0.004) (0.079 ± 0.002) (0.024) (0.004) 16mm (0.059) 24mm 0.0 Embossed Tape Variable Dimensions Tape Width B 1 Max D 1 Min F T 2 Max R Min W Max 8mm 4.35 (0.171) 12mm (0.323) 8.2 (0.059) 16mm 12.1 (0.476) 24mm 20.1 (0.791) 1.0 (0.039) 1.5 (0.217 ±0.002) 1.5 (0.217 ±0.002) 1.5 (0.217 ±0.002) 3.5 ± (0.098) 5.5 ±0.05 (0.256) 7.5 ±0.10 (0.295 ±0.004) 11.5 ±0.10 (0.453 ±0.004) 6.5 (0.256) 8.0 (0.315) 12.0 (0.472) (1.181) 40 (1.575) 50 (1.969) Note 1: The cavity defined by A 0, B 0 and K 0 shall surround the component with sufficient clearance that: a) the component does not protrude above the top surface of the carrier tape. b) the component can be removed from the cavity in a vertical direction without mechanical restriction after the top cover tape has been removed. c) rotation of the component is limited to 20 maximum for 8mm and 12mm tapes and 10 maximum for 16mm and 24mm tapes. d) lateral movement of the component is restricted to 0.5mm maximum for 8mm and 12mm wide tape and to 1.0mm maximum for 16mm and 24mm wide tape. Note 2: The tape with or without components shall pass around R without damage. 3
4 AND REEL SPECIFICATIONS SURFACE MOUNT Component Rotation θ T TYPICAL COMPONENT CAVITY CENTER LINE B O WIDTH (mm) 8, TO 200 TYPICAL COMPONENT CENTER LINE MAXIMUM ROTATION (θ T ) A O SMP 13 Tape Camber (Top View) 250mm (9.843) 1mm (0.039) MAX 1mm (0.039) 500mm MAX (19.686) ALLOWABLE CAMBER TO BE 1mm/250mm SMP 15 Tape Leader (Start/End) Specification CARRIER COVER END START COVER 160mm (6.30) MIN COMPONENTS 500mm (19.69) MIN EMPTY COMPONENT POCKETS SEALED WITH COVER EMPTY COMPONENT POCKETS SEALED WITH COVER SMP 16 4
5 AND REEL SPECIFICATIONS SURFACE MOUNT S3 SOT-23 Devices SMP 28 S5 TSOT, SOT-23 Devices SMP 29 SC6, S6 and TS8 SC70, TSOT, SOT-23, DFN (DCB) Devices SMP 32 5
6 AND REEL SPECIFICATIONS SURFACE MOUNT ST SOT-223 Devices SMP 17 M, Q, R DD Pak Devices SMP 18 F, FE, FW, G, GN, GW, S8, S, SW, MS8, MS, MS8E, MSE, SSOP, TSSOP, QFN, DFN, UTDFN and UTQFN Devices [except DFN (DCB)] SMP 19 6
7 REEL DIMENSIONS SURFACE MOUNT Direction of Feed Reel Dimensions W 3 DIRECTION OF FEED B* 40mm (OPTIONAL) MIN ACCESS HOLE AT SLOT LOCATION C ARBOR HOLE DIAMETER W 2 (MEASURED AT HUB) TOP COVER A D* N LABEL AREA EMBOSSMENT FULL RADIUS* IF PRESENT, SLOT IN CORE FOR START 2.5mm MIN WIDTH 10mm MIN DEPTH SMP 20 *DRIVE SPOKES OPTIONAL. IF USED, ASTERISKED DIMENSIONS APPLY. W 1 (MEASURED AT HUB) SMP 21 Tape Width A Max B MIn C D* Min N MIn W 1 W 2 Max W 3 8mm 12mm 16mm 24mm Note 1: All dimensions in millimeters. Note 2: See Table 1 for tape width and reel diameter of specific packages Shall Accommodate 14.4 Tape Width Without Interference
8 AND REEL SPECIFICATIONS TO-92 TO-92 Tape Dimension P0 W1 P2 P1 S F1 F2 H1 H H4 W D TO P TO-92 Reel Dimensions Table 1 Symbol Description Dimension (mm) D Sprocket Hole Diameter 4 ± 0.2 H Length from Seating Plane 16 ± 0.5 H1 Sprocket Hole Location 9 ± 0.5 H4 Component Base Height 20 Max P Sprocket Hole Pitch 12.7 ± 0.2 P0 Pitch of Component 12.7 ± 0.5 P1 Lead Location 3.85 ± 0.5 P2 Center of Seating Plane Location 6.35 ± 0.4 S Component Lead Spacing / W Carrier Tape Width 18 +1, 0.5 W1 Adhesive Tape Width 6.0 ± 1.0 F1, F2 Lead-to-Lead Distance , mm TYP 30.5mm TYP TO
9 AND REEL SPECIFICATIONS TO-92 Reel Pak Tape Orientation on Reel Ammo Pak Tape Orientation Inside Box ADHESIVE TRAILER LID FEED DIRECTION LABELS ON THIS SIDE OF BOX BOX TO SIDE WITH ADHESIVE TO-92 F05 STARTER Package Orientation on Tape STYLE E: Standard Flow TR (Flat Side of Package Faces Toward the Adhesive Tape) STYLE A: Special Flow TRA (Rounded Side of Package Faces Toward the Adhesive Tape) ADHESIVE ADHESIVE CARRIER CARRIER TO TO REV N
LBZX84XXXXLT1G SEMICONDUCTOR. 225 mw SOT-23 Zener Voltage Regulator Diodes. Zener Voltage Regulator Diodes. SERIES 225mW SOT-23 TECHNICAL DATA
SEMICONDUCTOR TECHNICAL DATA 225 mw SOT-23 Zener Voltage Regulator Diodes GENERAL DATA APPLICABLE TO ALL SERIES IN THIS GROUP Zener Voltage Regulator Diodes LBZX84XXXXLTG SERIES 225mW SOT-23 3 Cathode
SOLID TANTALUM CHIP CAPACITORS T496 SERIES Fail-Safe Fused
Built-in fuse protects against damaging short circuit failure mode Precision-molded, laser-marked case Symmetrical, compliant terminations Taped and reeled per EIA 481-1 geometry and footprints equivalent
ALUMINUM ORGANIC CAPACITORS
ALUMINUM ORGANIC CAPACITORS A700 Series APPLICATIONS Input/Output Filters for voltage regulators, converters, and SMPS Battery Decoupling (portable, handheld electronics) Power Decoupling (Procesor, Transmitter
SOLID TANTALUM CHIP CAPACITORS T510 SERIES High Capacitance-Low ESR
SOLID TANTALUM CHIP CAPACITORS T510 SERIES High Capacitance-Low Ultra Low < 30 mω New E/7260 Case with < 18 mω Up to 5 Amps ripple current RoHS Compliant & Leadfree Termination (see www. kemet.com for
ALUMINUM ORGANIC CAPACITORS
ALUMINUM ORGANIC CAPACITORS A700 Series APPLICATIONS Input/Output Filters for voltage regulators, converters, and SMPS Battery Decoupling (portable, handheld electronics) Power Decoupling (Procesor, Transmitter
SOLID TANTALUM CHIP CAPACITORS
SOLID TANTALUM CHIP CAPACITORS T491 SERIES - Precision Molded Chip Meets or Exceeds EIA Standard 535BAAC Taped and Reeled per EIA 481-1 Symmetrical, Compliant Terminations Optional Gold-plated Terminations
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. CERAMIC CHIP CAPACITORS C0G (NP0), X7R, X5R, Z5U and Y5V Dielectrics 10,
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. CERAMIC CHIP CAPACITORS C0G (NP0), X7R, X5R, Z5U and Y5V Dielectrics 10,
SOLID TANTALUM CHIP CAPACITORS T495 SERIES Low ESR, Surge Robust
CATHODE (-) END VIEW W SOLID TANTALUM CHIP CAPACITORS Designed for very low ESR High ripple current capability High surge current capability 100% accelerated steady-state aging 100% Surge Current test
CONDUCTIVE POLYMER CHIP CAPACITORS
FEATURES Polymer Cathode Technology Use Up to 80% of Rated Voltage (20% Derating) Low for part types > 10 Volts High Frequency Cap Retention Capacitance 15 to 1000µF (±20%) No-Ignition Failure Mode Voltage
SOLID TANTALUM CHIP CAPACITORS T495 SERIES Low ESR, Surge Robust
SOLI TANTALUM CHIP CAPACITORS esigned for very low SR High ripple current capability High surge current capability % accelerated steady-state aging % Surge Current test Meets or xceeds IA Standard 535BAAC
Summary of Packing Options Packing Options
9 Mechanical Data 9 Mechanical Data The following section describes the mechanical specifications of products in this Telecom Design Guide. Gas Plasma Arresters Package Dimensions / Specifications........................
Tape & Reel Packaging Instruction
TABLE OF CONTENTS 1.0..PURPOSE 2.0..SCOPE 3.0..REFERENCES 4.0..MATERIAL OVERVIEW 5.0..AVAILABILITY OVERVIEW 6.0..GENERAL OVERVIEW 7.0..TAPE REELING PROCEDURE 8.0...EXHIBITS 1.0 PURPOSE This specification
PRODUCT CARTON SPECIFICATION Outer/Inner Cartons, Designs & Camera Ready Art
PRODUCT CARTON SPECIFICATION Outer/Inner Cartons, Designs & Camera Ready Art OUTER CARTON SPECIFICATIONS OUTER CARTON PRODUCT DESCRIPTION HEIGHT (H) WIDTH (W) LENGTH (L) CARTON inches Mm inches mm inches
Packaging Information
PKGING ORDERING ODE NTI-STTI PKGE ODE PREFERRED PKGE ODE PKGING DESRIPTION 51, ulk 52, 52T P SM (DO-214) /SMG (DO-215), 12 mm tape, 7" diameter plastic reel 2D P SM5-8 (DO-218), 24 mm tape, 13" diameter
THROUGH HOLE - AXIAL LEADED Through Hole Package Quantity Case Micro Commercial Components
1 THOUH HOL - XIL L Through Hole Package Quantity ase vailable Packaging (pcs) Style ulk 13 Tape & eel mmo Pack ox/ag Qty Tube Qty Tray Qty Qty Qty -405 5000-1 2500 50 O-15 500 4000 3000 O-201 500 1200
CONDUCTIVE POLYMER CHIP CAPACITORS
CONDUCTIVE POLYMER CHIP CAPACITORS T520 Series - KO Cap FEATURES Polymer Cathode Technology Use Up to 80% of (20% Derating) Low for part types > 10 Volts High Frequency Cap Retention 15 to 1000μF (±20%)
1.0" Min. L.S..762/.030. Styles SR15, SR20, SR30, SR40, SR50
Radial Leads/SkyCap GENERAL INFORMATION AVX SR Series Conformally Coated Radial Leaded MLC Temperature Coefficients: C0G (NP0), X7R, Z5U 200, 100, 50 Volts (300V, 400V & 500V also available) Case Material:
Tape and Reel Packaging
Tape and Reel Packaging Introduction The electronics industry is making a tremendous investment in surfacemount technology. The reasons for this investment include cost savings resulting from automated
Fast Acting Fuse SMD Thin Film
Electrical Specifications Operating temperature : -55 C to +25 C Current carrying capacity : For MCF0402E and MCF0603E at -55 C 7% of rating, at -25 C 0% of rating, at +25 C 80% of rating For MCF0603C
NTC thermistors, high-temperature sensors /7/8...
FEATURES Small diameter Quick response to temperature change High stability over a long life Wide temperature range from 40 to +300 C Resistant to corrosive atmospheres and harsh environments. APPLICATION
GAS DISCHARGE TUBES (GDTS)
GAS DISCHARGE TUBES (GDTS) Littelfuse's GDTs (Gas Discharge Tubes) are placed in front of, and in parallel with, sensitive telecom equipment such as power lines, communication lines, signal lines and data
MULTILAYER CERAMIC CAPACITORS/AXIAL & RADIAL LEADED
MULTILAYER CERAMIC CAPACITORS/AXIAL & RADIAL LEADED Multilayer ceramic capacitors are available in a variety of physical sizes and configurations, including leaded devices and surface mounted chips. Leaded
General Purpose Ceramic Capacitors (C Series)
Features: RoHS Compliant and Halogen Free Capacitance range: 0.1pF to 220uF range: 4V to 100V Terminations: 100% matte Tin (Sn), Palladium (Pd-Ag), Gold (Au) and Lead (Pb) Very low ESR in X7R/X5R (
General Note #1 :Different kinds of IC Packages
2012/09/01 09:08 1/9 General Note #1 :Different kinds of IC s General Note #1 :Different kinds of IC s Click to expand Image Name Description & Examples Ball Grid Array aka BGA BGA packages are used to
PLCC Plastic Leaded Chip Carrier
PLCC Plastic ed Chip Carrier Plastic ed Chip Carriers (PLCC) are four-sided J ed Plastic body packages. counts range from 20 to 84. PLCC packages can be square or rectangle. Body sizes range from.35" to
Polymer PTC Resettable Fuse: KRG Series
Polymer PTC Resettable Fuse: KRG Series 6V/16V Lead Type Features 1. RoHS & HF compliant 2. Radial leaded devices 3. Broadest range of resettable devices available in the industry 4. Current ratings from
CHIP FUSE; RECTANGULAR TYPE FCC10,16,20,32, FHC10,16,20,32. RoHS COMPLIANCE ITEM Halogen and Antimony Free
Spec. No.: FCC K HTS 0003 /13 Date: 2017. 1. 10 Specification Title: Style: CHIP FUSE; RECTANGULAR TYPE FCC10,16,20,32, FHC10,16,20,32 RoHS COMPLIANCE ITEM Halogen and Antimony Free Product specification
Ceramic disc capacitors (kinked leads) Class 2, low loss (0.2% max.) 500 V; 1 kv; 2 kv; 3 kv
FEATURES High reliability Low losses High capacitance in small size Kinked leads. APPLICATIONS In electronic circuits where low losses and high capacitance per volume are essential, for example: SMPS HF
Power Inductors (IP Series)
Multi-Layer Power Inductors (IP Series) ORDERING CODE... 1 Standard External Dimensions... 2 Power Inductor for Choke (L Type)... 3 Power Inductor for DC/DC converter (S Type)... 4 Testing Condition &
Multilayer Ceramic Chip Capacitors
RoHS Compliant FEATURES Includes all homogeneous materials STANDARD EIA 0805 & 1206 PACKAGING *See Part Number System for Details EACH COMPONENT CONTAINS 4 ISOLATED CERAMIC CAPACITORS AVAILABLE IN A WIDE
Thick Film Chip Resistors
FEATURES EIA STANDARD SIZING 01005(1/32), 0201(1/20), 0402(1/16), 0603(1/10), 0805(1/8), 1206(1/4), 1210(1/3), 2010(3/4) AND 2512(1) METAL GLAZED THICK FILM ON HIGH PURITY ALUMINA SUBSTRATE..(CERMET) PROVIDES
Series. Applications Typical applications include decoupling and filtering in military and aerospace applications.
High Reliability COTS (CWR11 Style) T493 Military/Aerospace COTS MnO 2 Overview The KEMET T493 is designed for the COTS (Commercial Off-The-Shelf) requirements of military and aerospace applications. This
Anti-Surge Thick Film Chip Resistors
FEATURES EXCELLENT ANTI-SURGE & ANTI-SULFUR CHARACTERISTICS AEC-Q200 QUALIFIED RATED POWER UPGRADE IN SMALLER PACKAGE SIZE AVAILABLE IN ± TOLERANCE BOTH FLOW SOLDER AND REFLOW SOLDERING ARE APPLICABLE
Typical applications include decoupling and filtering, in industrial and automotive high-end applications.
Overview The KEMET T489 provides DC leakage current that is 25% lower than the commercial T491. The T489 also offers improved reliability, low ESR options and meets or exceeds the requirements of EIA standard
CHIP FUSE; RECTANGULAR TYPE. RoHS COMPLIANCE ITEM Halogen and Antimony Free
Spec. No.: SBF K HTS 0001 /4 Date: 2017. 1. 10 Specification Style: CHIP FUSE; RECTANGULAR TYPE SBF32[Optional code:as] RoHS COMPLIANCE ITEM Halogen and Antimony Free Product specification contained in
DATA SHEET TAPE AND REEL TYPE LED LAMPS. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only LG2040-PF/TRS-X REV. : DATE : 21 - Feb.
TAPE AND REEL TYPE LED LAMPS Pb Lead-Free Parts LG2040-PF/TRS-X DATA SHEET DOC. NO : REV. : QW0905- LG2040-PF/TRS-X A DATE : 21 - Feb. - 2006 PART NO. Package Dimensions LIGITEK ELECTRONICS CO.,LTD. LG2040-PF/TRS-X
Thick Film Chip Resistors
FEATURES EIA STANDARD SIZING 01005(1/32), 0201(1/20), 0402(1/16), 0603(1/10), 0805(1/8), 1206(1/4), 1210(1/3), 2010(3/4) AND 2512(1) METAL GLAZED THICK FILM ON HIGH PURITY ALUMINA SUBSTRATE..(CERMET) PROVIDES
Anti-Surge Thick Film Chip Resistors
FEATURES EXCELLENT ANTI-SURGE CHARACTERISTICS AEC-Q200 QUALIFIED RATED POWER UPGRADE IN SMALLER PACKAGE SIZE MEETS +85 C/85%RH TEST 000 HOURS MEETS CLIMATE CATEGORY (IEC 60068): 55/55/56 AVAILABLE IN ±
Content (RF Inductors) Multi-Layer High Frequency Inductors (IQ & HI Series) Cautions... 18
Content (RF Inductors) Multi-Layer High Inductors (IQ & HI Series)... 2 Ordering Code... 2 Standard External Dimensions... 3 High Q Type (IQ Series)... 4 Standard Type (HI Series)... 5 Testing Condition
Surface Mount Aluminum Electrolytic Capacitors NACEW Series
FEATURES CYLINDRICAL V-CHIP CONSTRUCTION WIDE TEMPERATURE -55 ~ +105 O C DESIGNED FOR REFLOW SOLDERING MEETS THE REQUIREMENTS OF AEC-Q200* *Contact NIC for supporting test data CHARACTERISTICS Rated Voltage
NC7SV08 TinyLogic ULP-A 2-Input AND Gate
NC7S08 TinyLogic ULP-A 2-Input AND Gate Features 0.9 to 3.6 CC Supply Operation 3.6 Over-oltage Tolerant I/Os at CC from 0.9 to 3.6 Extremely High Speed t PD - 1.0 ns: Typical for 2.7 to 3.6 CC - 1.2 ns:
RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder.
Overview The KEMET Aluminum Organic Capacitor (AO-CAP) is a solid state aluminum capacitor. The cathode is a conductive organic polymer which results in very low ESR and improved capacitance retention
Multi-Layer Power Inductors (IP Series)
Multi-Layer Power Inductors (IP Series) For DC/DC Converter Application ORDERING CODE IP R M P S 9 PRODUCT CODE IP : Multilayer Power Inductor (Lead Free) DIMENSION (L X W) Code Dimension EIA. x. mm. X.
MH 182 Multi-Purpose Hall Effect Latch
MH 182 Hall-Effect sensor is a temperature stable, stress-resistant latch. Superior high-temperature performance is made possible through a dynamic offset cancellation that utilizes chopper-stabilization.
NC7SVL08 TinyLogic Low-I CCT Two-Input AND Gate
NC7SL08 TinyLogic Low-I CCT Two-Input ND Gate Features 0.9 to 3.6 CC Supply Operation 3.6 Over-oltage Tolerant I/Os at CC from 0.9 to 3.6 Power-Off High-Impedance Inputs and Outputs Proprietary Quiet Series
Surface-Mounted Ceramic EMI Filter Capacitors
X2Y S Surface-Mounted Ceramic EMI Filter Capacitors Feb, 2008 Rev.14 1 DESCRIPTION Yageo s X2Y series is a breakthrough in the design of ceramic multilayer products for decoupling and filtering in an IPD
CHIP FUSE; RECTANGULAR TYPE. RoHS COMPLIANCE ITEM Halogen and Antimony Free
Spec. No.: HFC K HTS 0001 /3 Date: 2017. 1. 10 Specification Title: Style: CHIP FUSE; RECTANGULAR TYPE HFC32[Optional code:ag] RoHS COMPLIANCE ITEM Halogen and Antimony Free Product specification contained
Full Fail-Safe RS-485/RS-422 Transceiver with IEC61000 ESD Protection
Intersil Interface Products High Performance Analog Full Fail-Safe /RS-422 Transceiver with IEC61000 ESD Protection Tiny MSOP Saves of board space over SOIC 0% of board IEC61000-4-2 Protection ±15kV Airgap
SA Series Tape Feeder
SA Series Tape Feeder SA Series 1216, 2432 SL Tape Feeder Product Guide All rights reserved Revision A (2) 31 August 2018 0870D-E052 SA Series 1216, 2432 SL Tape Feeder Product Guide Hover-Davis has checked
Temperature Coefficient of Resistance Temperature Coefficient of Resistance, Tracking Maximum Operating Voltage Insulation Resistance
.220 Small Outline Dual-In-Line Thick Film Surface Mount Resistor Networks RoHS Compliant Electrical Standard Resistance Range, Ohms Standard Resistance Tolerance, at 25 C Operating Temperature Range Temperature
Surface Mount Aluminum Electrolytic Capacitors
CYLINDRICL VCHIP CONSTRUCTION FOR SURFCE MOUNTING VERY LOW IMPEDNCE WIDE TEMPERTURE RNGE (55 +5 O C) REDUCED SIZE DESIGNED FOR UTOMTIC MOUNTING ND REFLOW SOLDERING MEETS THE REQUIREMENTS OF ECQ200* *Contact
C 1210 C 184 K 3 H A C AUTO. Rated Voltage (VDC) Packaging/ Grade (C-Spec) Dielectric
High Temperature 1 C, Ultra-Stable X8R Dielectric, VDC (Commercial & Automotive Grade) Overview KEMET s Ultra-Stable X8R dielectric features a 1 C maximum operating temperature, offering the latest in
Overview. Benefits. Applications. Environmental Compliance. Tantalum Surface Mount Capacitors Automotive Grade T491 Automotive/Industrial Grade MnO 2
Overview The KEMET T491, designed specifically for today s highly automated surface mount processes and equipment, is the leading choice for surface mount designs. The T491 combines KEMET s proven solid
MH 189 Ultra High Sensitivity Hall Effect Sensor
MH 189 Hall-effect sensor is a temperature stable, stress-resistant sensor. Superior high-temperature performance is made possible through a dynamic offset cancellation that utilizes chopper-stabilization.
Sensitive Triacs. Description. Features. 10Amps. Applications. Schematic Symbol. Symbol Parameter Value Unit = 50 C SOT-223 T L TO-92 T C
Description New 1Amp bi-directional solid state switch series offering direct interface to microprocessor drivers in economical TO-92 and surface mount packages. The die voltage blocking junctions are
SM24CANB Series 500W TVS Diode Array
SM4CANB Series 5W TVS Diode Array RoHS Pb GREEN Description The SM4CANB TVS Diode Array is designed to protect automotive Controller Area Network (CAN lines from damage due to electrostatic discharge (ESD,
Tantalum Surface Mount Capacitors Automotive Grade T495 Automotive Grade Surge Robust Low ESR MnO 2
T495 Automotive Grade Surge Robust Low MnO 2 Overview The low, surge-robust T495 Automotive, is designed for demanding applications that require high surge current and high ripple current capability. The
MF-R/250 Series - Telecom PTC Resettable Fuses
TV Rheinland Features Radial Leaded Devices High ability to withstand lightning surges Ideal lightning surge coordination device Binned and sorted narrow resistance ranges available Lead free option available
CHIP FUSE; RECTANGULAR TYPE. RoHS COMPLIANCE ITEM Halogen and Antimony Free
Spec. No.: FMC K HTS 0001 /7 Date: 2017. 1. 10 Specification Title: CHIP FUSE; RECTANGULAR TYPE Style: FMC10, 16 RoHS COMPLIANCE ITEM Halogen and Antimony Free Product specification contained in this specification
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) Commercial L Series, SnPb Termination, X7R Dielectric 6.3V 250 VDC (Commercial Grade)
Commercial L Series, SnPb Termination, X7R Dielectric V 2 VDC (Commercial Grade) Overview KEMET s Commercial L Series with Tin/Lead Termination surface mount capacitors in X7R dielectric are designed to
Automotive Grade Thin Film Chip Resistors
FEATURES PRECISE TOLERANCE AND TEMPERATURE COEFFICIENT EIA STANDARD CASE SIZES (0402 ~ 2512) AEC-Q200 QUALIFIED FOR AUTOMOTIVE APPLICATIONS LOW NOISE, THIN FILM (NiCr) CONSTRUCTION TEMPERATURE RANGE -55
Overview. Benefits. Applications. Environmental Compliance. Tantalum Surface Mount Capacitors Fused T496 Fused MnO 2
Overview The T496 tantalum chip capacitors offer a "fail safe" design. The built-in fuse element offers excellent protection from damaging short circuit conditions in applications where damaging high fault
Multi-Layer Power Inductors (IP_L Series)
Multi-Layer Power Inductors (IP_L Series) For Choke Application ORDERING CODE IP 2012 2R2 M P L 9 PRODUCT CODE IP : Multilayer Power Inductor (Lead Free) DIMENSION (L X W) Code Dimension EIA 1608 1.6 x
CGA Series Automotive Grade Capacitors
CGA Series Automotive Grade Capacitors Type: CGA2 [EIA CC0402] CGA3 [EIA CC0603] CGA4 [EIA CC0805] CGA5 [EIA CC1206] CGA6 [EIA CC1210] Issue date: April 2011 TDK MLCC US Catalog REMINDERS Please read before
NC7SP17 TinyLogic ULP Single Buffer with Schmitt Trigger Input
NC7SP17 TinyLogic ULP Single Buffer with Schmitt Trigger Input Features 0.9 to 3.6 CC Supply Operation 3.6 Over-oltage Tolerant I/Os at CC from 0.9 to 3.6 Propagation Delay (t PD ): 4.0ns Typical for 3.0
HY2112 Datasheet. 1- Cell LiFePO4. Battery Packs Protection ICs HYCON Technology Corp. DS-HY2112-V08_EN
Datasheet 1- Cell LiFePO4 Battery Packs Protection ICs Table of Contents 1 GENERAL DESCRIPTION 4 2 FEATURES 4 3 APPLICATIONS 4 4 BLOCK DIAGRAM 5 5 ORDERING INFORMATION 6 6 MODEL LIST 6 7 PIN CONFIGURATION
Electrical Specifications 5mm. Ic (A) (V)
Features: AC operating voltage from 11V to 1000V DC operating voltage from 14V to 1465V Peak current up to 6500 amps Energy handling up to 625J UL1449 certified file no. E476752 Operating temperature range
150 C. RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder.
T498 Automotive Grade MnO 2 150 C Overview The KEMET T498 Series is a high temperature product that offers optimum performance characteristics in applications with operating temperatures up to 150 C. Advanced
Overview. Benefits. Applications. Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) X7R Dielectric, VDC (Commercial Grade)
X7R Dielectric, 2 VDC (Commercial Grade) Overview KEMET s X7R dielectric features a 1 C maximum operating temperature and is considered temperature stable. The Electronics Components, Assemblies and Materials
Applications C 1206 C 106 M 4 R A C TU. Rated Voltage (VDC) 9 = = 10 4 = 16 3 = 25 6 = 35 5 = 50 1 = = 200 A = 250
X7R Dielectric, 2 VDC (Commercial Grade) Overview KEMET s X7R dielectric features a 1 C maximum operating temperature and is considered temperature stable. The Electronics Components, Assemblies & Materials
Overview. Benefits. Applications
ESD, C0G Dielectric, 25 250 VDC (Commercial & Automotive Grade) Overview The KEMET electrostatic discharge (ESD) rated commercial and automotive grade surface mount capacitors in C0G dielectric are suited
and DLA Drawing 04053
T496 Fused Commercial Off-The-Shelf (COTS) MnO 2 Overview The T496 commercial-off-the-shelf (COTS) with a builtin fuse design, provides excellent protection from short circuit conditions in applications
NC7SV126 TinyLogic ULP-A Buffer with Three-State Output
NC7S126 TinyLogic ULP-A Buffer with Three-State Output Features 0.9 to 3.6 CC Supply Operation 3.6 Over-oltage Tolerant I/O s at CC from 0.9 to 3.6 Extremely High Speed tpd - 1.0ns: Typical for 2.7 to
Low TCR, 1mW Dual Rejustor Micro-Resistor MBD-472-AL
Low TCR, 1mW Dual Rejustor Micro-Resistor MBD-472-AL The Rejustor is a precision, electrically-adjustable resistor from Microbridge. The Rejustor can be adjusted to a precision of 0.1%, or better. The
Safety Grating DIAMOND-GRIP PRODUCT DESCRIPTION FEATURES & BENEFITS MATERIAL SPECIFICATIONS. Note:
DIAMOND-GRIP PRODUCT DESCRIPTION Diamond-Grip is a one-piece metal plank grating manufactured by a cold forming process in the shape of a channel. The web of the channel is the walking surface and has
TeleLink SM Fuse. CSA Approved File No. LR UL Recognized E Patent Pending. TeleLink SM Fuse. Product Description.
Product Description The TeleLink Surface Mount (SM) surge resistant time lag fuse has been designed to offer the ultimate in circuit protection while meeting the necessary surge requirements of the telecommunications
NC7SV126 TinyLogic ULP-A Buffer with Three-State Output
NC7S126 TinyLogic ULP-A Buffer with Three-State Output Features 0.9 to 3.6 CC Supply Operation 3.6 Over-oltage Tolerant I/O s at CC from 0.9 to 3.6 Extremely High Speed tpd - 1.0 ns: Typical for 2.7 to
MH 182 Multi-Purpose Hall Effect Latch
MH 182 Hall-Effect sensor is a temperature stable, stress-resistant latch. Superior high-temperature performance is made possible through a dynamic offset cancellation that utilizes chopper-stabilization.
C 0603 C 104 J 3 R E C AUTO. Capacitance Tolerance. Rated Voltage (VDC) J = ±5% K = ±10% M = ±20% 3 = 25 5 = 50 M = 63 1 = = 200
ESD, X7R Dielectric, 16 250 VDC (Commercial & Automotive Grade) Overview The KEMET electrostatic discharge (ESD) rated commercial and automotive grade surface mount capacitors in X7R dielectric are suited
Surface Mount Aluminum Electrolytic Capacitors
FEATURES CYLINDRICAL V-CHIP CONSTRUCTION LOW COST, GENERAL PURPOSE, 2000 HOURS AT 85 O C NEW EXPANDED CV RANGE (up to 6800μF) ANTI-SOLVENT (2 MINUTES) DESIGNED FOR AUTOMATIC MOUNTING AND REFLOW SOLDERING
Reference Only. Inductance Frequency (μh) Tolerance Typ Max (MHz min.) 85 *
P.1/10 CHIP COIL (CHIP INDUCTORS) LQM2HPN G0L REFERENCE SPECIFICATION 1. Scope This reference specification applies to LQM2HPN_G0 series, Chip Coil (Chip Inductors). 2. Part Numbering (ex) LQ M 2H P N
Data Sheet. MGA MHz 1GHz ½ Watt High Linearity Amplifier. Features. Description. Applications. Specifications.
MGA-3011 150MHz 1GHz ½ Watt High Linearity Amplifier Data Sheet Description Avago Technologies MGA-3011 is a high linearity ½ Watt PA with good OIP3 performance and exceptionally good PAE at p1db gain
Surface Mount Aluminum Electrolytic Capacitors
FEATURES CYLINDRICAL V-CHIP CONSTRUCTION FOR SURFACE MOUNTING VERY LOW IMPEDANCE & HIGH RIPPLE CURRENT AT 100KHz SUITABLE FOR DC-DC CONVERTER, DC-AC INVERTER, ETC. NEW EXPANDED CV RANGE, UP TO 6800μF NEW
TABLE of contents. Metal Oxide Varistor (MOV) Varistors-5D Series Varistors-7D Series Varistors-10D Series... 5
TABLE of contents Subject Page Metal Oxide Varistor (MOV)..................................................... 1 Varistors-5D Series............................................................ 3 Varistors-7D
VAR Series Zinc Oxide Varistor
FEATURES Round Zinc Oxide, leaded Coating: epoxy resin, flame-retardant material Operating Temperature Range: -40 ~+105 Wide operating voltage Approvals: CQ C, UL, VDE RoHS 201165EU; REACH Compliant High
Radial Leads/SkyCap /AR Series
Radial Leads/SkyCap /AR Series AUTOMOTIVE GENERAL INFORMATION AVX AR Series Conformally Coated Radial Leaded MLC Temperature Coefficients: C0G (NP0), X7R, X8R 3000, 2000, 1000, 200, 100, 50 Volts Case
Overview. Benefits. Applications. Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) X7R Dielectric, VDC (Commercial Grade)
X7R Dielectric, 2 VDC (Commercial Grade) Overview KEMET s X7R dielectric features a C maximum operating temperature and is considered temperature stable. The Electronics Components, Assemblies and Materials
RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder, Gold plated or Non-magnetic 100% Sn solder.
Overview The KEMET T491 Series, designed specifically for today s highly automated surface mount processes and equipment, is the leading choice for surface mount designs. The T491 combines KEMET s proven
0.6mm Pitch Stacking Height 3mm to 16mm Connectors
.6mm Pitch Stacking Height 3mm to 16mm Connectors FX8, FX8C Series FX8 Series FX8C Series Note: that FX8 series and FX8C series are not mated with each other. Features 1. Stacking Height: 3mm to 16mm Stacking
Surface Mount Aluminum Electrolytic Capacitors
FEATURES CYLINDRICAL V-CHIP CONSTRUCTION FOR SURFACE MOUNTING AVAILALE ITH ANTI-VIRATION IDE TERMINATIONS VERY LO IMPEDANCE & HIGH RIPPLE CURRENT AT 100KHz EXTENDED LOAD LIFE (2,000 ~ 5,000 HOURS @ +105
Reference Only. 1. Scope This reference specification applies to LQM2MPN_G0L series, Chip Coil (Chip Inductors).
Spec No. JELF243B-22L-1 P1/9 CHIP COIL (CHIP INDUCTORS) LQM2MPN GL REFERENCE SPECIFICATION 1. Scope This reference specification applies to LQM2MPN_GL series, Chip Coil (Chip Inductors). 2. Part Numbering
CONTENTS HMK SERIES X.100 CONNECTORS
HMK SERIES CONTENTS HMK SERIES -.100 X.100 CONNECTORS PAGE 5 Introduction 6 Specifications 7 Ordering Chart - 2 & 3 Row 2 ROW UNINTERRUPTED (17-65 CONTACTS) 8 FC, FD, FS, FW, SC, SD, SS, SW- Socket, Straight
HY2111 Data Sheet 1- Cell Lithium-ion/Lithium Polymer
Data Sheet 1- Cell Lithium-ion/Lithium Polymer Battery Packs Protection ICs Table of Contents 1 GENERAL DESCRIPTION 4 2 FEATURES 4 3 APPLICATIONS 4 4 BLOCK DIAGRAM 5 5 ORDERING INFORMATION 6 6 MODEL LIST
MAE 322 Machine Design Shafts -3. Dr. Hodge Jenkins Mercer University
MAE 322 Machine Design Shafts -3 Dr. Hodge Jenkins Mercer University Setscrews Setscrews resist axial and rotational motion They apply a compressive force to create friction The tip of the set screw may
0.6mm Pitch Stacking Height 3mm to 16mm Connectors
.6mm Pitch Stacking Height 3mm to 16mm Connectors FX8/FX8C Series FX8 Series FX8C Series Note: that FX8 series and FX8C series are not mated with each other. Features 1. Stacking Height: 3mm to 16mm Stacking
Intel Enpirion Power Solutions Tape and Reel, and Tray Packaging Information
2017 Intel Corporation. All rights reserved. Intel, the Intel logo, Altera, Enpirion, and the Enpirion logo are trademarks of Intel Corporation in the US and/or other countries. Other marks and brands
Data sheet FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE & ANTI-SULFURATION. AEC-Q200 qualified. RoHS COMPLIANCE ITEM Halogen and Antimony Free
No.: RMNW K HTS-1 /3 Date: 217. 4. 21 Data sheet : ANTI-SULFURATION RMNW1,16,2,32,35 AEC-Q2 qualified RoHS COMPLIANCE ITEM Halogen and Antimony Free Note: Stock conditions Temperature: +5 C +35 C Relative
Applications F 622 J F 104 M 050 C. Capacitance Code (pf) First two digits represent significant figures. Third digit specifies number of zeros.
General Purpose, Pulse and DC Transient Suppression F622 Series Metallized Polyester Film, 5 mm Lead Spacing, 50 630 VDC Overview The F622 Series is constructed of metallized stacked polyester film capacitor
Power Splitter/Combiner
Ultra-Small Ceramic Power Splitter/Combiner 2 Way-90 50Ω 2500 to 4500 MHz Maximum Ratings Operating Temperature -55 C to 100 C Storage Temperature -55 C to 100 C Power Input (as a splitter) 15W* max. *