ILLUSTRATION FOR SNT-H SERIES
|
|
- Lindsey Hardy
- 5 years ago
- Views:
Transcription
1 ILLUSTRATION FOR SNT-H SERIES SNT..H SNT..H Housings are very heavy duty housings and made of cast steel. They are primarily designed for self aligning ball bearings and spherical roller bearings mounted either directly on shaft or on adapter sleeve. Type:- SNT..H are split housings, the dimensions confirm to ISO-113. They are interchangeable with SNH housings because of similar overall dimensions, whenever there is heavy duty load application.the housings can be supplied with end cover for closed shaft application. Normally supplied for non locating bearing arrangement. However separate locating ring (FRB) can be ordered for locating bearing application.snt..h housings are designed for grease lubrication. Recommended initial grease fill per each size is specified in the table. Suitable grease nipple provided in each housing. Seals:- SNT..H housings are normally supplied with felt seal (TC),however they are suitable for double lip seal (TG),V ring seal (TA).labyrinth seal (TS). Eye Bolt:- An eye bolt are provided for shaft size 110 and above. Materials:- SNT..H housings are available only in cast steel material. SNT H design : Option: Housings of cast steel with seal grooves to fit SNH Series,two oblong holes in feet Solid feet: No bolt holes in feet S two holes drilled D four holes drilled F Size designation: according to suitable bearing no. e.g.508 Supplementary designations Housings for shaft end with end cover at one side Housings with V-ring seals Housings with Felt seals Housings with double-lip seals Housings with labyrinth seals Housing adapted for bearing relubrication With grease nipple H1 G 1/4 or H1 G 1/8 grease escape valve (s) (nipple size=n) grease escape valve (s) (nipple size=n) Nipple bole in the middle of bearing Bore to fit W33 groove Housing adapted for relubrication of labyrinth seals on one side Housing adapted for relubrication of labyrinth seals on both side A TA TC TG TS N V VA M T TD 66
2 SNT SERIES 67
3 SNT...H PLUMMER BLOCK HOUSINGS FOR BEARINGS WITH ADAPTER SLEEVE double-lip seals, TG type V-ring seals, TA type felt seals, TC type labyrinth seals, TS type Plummer da A A1 A2 Ca Da H H1 H2 J L N N1 G Bearing with Adapter Sleeve Size/TWO Nos. per Housing SNT EK + H 205 5/ EK + H / EK + H /52 SNT EK + H 206 8/ EK + H 306 6/ EK+ H 306 6/62 SNT EK + H / K + H /62 SNT EK + H / EK + H / CCK+ H /72 SNT EK + H / K + H /72 SNT EK + H / EK + H 308 8/ EK+ H 308 8/80 SNT EK + H 307 9/ EK + H /80 SNT EK + H / EK + H / CCK+ H /85 SNT EK + H / EK + H 310 9/ CCK+ H 310 9/90 SNT EK + H 308 9/ EK + H / CCK+ H 308 9/ CCK+ H /90 SNT EK + H / EK + H / EK+ H /100 SNT EK + H / EK + H / CCK+ H / CCK+ H /100 68
4 Plummer da A A1 A2 Ca Da H H1 H2 J L N N1 G Bearingwith Adapter Sleeve Size/TWO Nos. per Housing SNT EK + H / EK + H / EK+ H /110 SNT EK + H / K + H / CCK+ H / CCK + H /110 SNT EK + H / EK + H / CCK+ H /120 SNT EK + H / K + H / CCK+ H / EK+ H /120 SNT K + H / K + H / EK+ H /130 SNT K + H / K + H / CCK+ H / EK+ H /130 SNT K + H / EK + H / EK+ H /140 SNT EK + H / K + H / CCK+ H / EK+ H /140 SNT K + H / K + H / EK+ H /150 SNT K + H / K + H / EK+ H / CCK+ H /160 SNT K + H / K + H / CCK+ H / EK+ H /160 69
5 SNT...H PLUMMER BLOCK HOUSINGS FOR BEARINGS WITH ADAPTER SLEEVE double-lip seals, TG type V-ring seals, TA type felt seals, TC type labyrinth seals, TS type Plummer da A A1 A2 Ca Da H H1 H2 J L N N1 G Bearing with Adapter Sleeve Size/TWO Nos. per Housing SNT K + H / K + H / EK+ H /170 SNT K + H / K + H / CCK+ H / EK+ H /170 SNT K + H / K + H / EK+ H / CCK/W33+ H /180 SNT EK + H / EK + H / CCK+ H / EK+ H /180 SNT K + H / K + H / EK+ H / CCK/W33+ H /200 SNT EK + H / EK + H / CCK+ H / EK+ H /200 SNT K + H / EK+ H / CCK/W33+ H /215 SNT EK + H / EK + H / CCK+ H / EK+ H /215 SNT EK+ H / CCK/W33+ H /230 SNT CCK/W33+ H / CCK/W33+ H /250 SNT CCK/W33+ H / CCK/W33+ H /270 SNT CCK/W33+ H / CCK/W33+ H /290 70
6 SNT...H PLUMMER BLOCK HOUSINGS FOR BEARING WITH CYLINDRICAL BORE Plummer da db A A1 A2 Ca Da H H1 H2 J L N N1 G Appropriate bearing Size/TWO Nos. per Housing SNT E 5/ E 3.5/ E 3.5/52 SNT E 8/ E 6/ E 6/62 SNT E 7.5/ E 4/ CC 7.5/62 SNT E 8.5/ E 5.5/ E 5.5/72 SNT E 7.5/ E 3.5/ CC 7.5/72 SNT E 10.5/ E 8/ E 8/80 SNT E 9/ E 4/ CC 9/80 SNT E 5.5/ E 3.5/ E 3.5/85 SNT E 10.5/ E 9/ CC 9/90 SNT E 9/ E 4/ CC 9/ CC 4/90 SNT E 11.5/ E 9.5/ E 9.5/100 SNT E 9.5/ E 4/ CC 9.5/ CC 4/100 71
7 SNT...H PLUMMER BLOCK HOUSINGS FOR BEARINGS WITH ADAPTER SLEEVE double-lip seals, TG type V-ring seals, TA type felt seals, TC type labyrinth seals, TS type Plummer 72 da db A A1 A2 Ca Da H H1 H2 J L N N1 G Appropriate bearing Size/TWO Nos. per Housing SNT E 13/ E 10/ E 10/110 SNT E 10.5/ / CC 10.5/ CC 4/110 SNT E 14/ E 10/ CC 10/120 SNT E 11/ E 4/ CC 11/ E 4/120 SNT / / E 12.5/130 SNT / / CC 12.5/ E 5/130 SNT E 16/ E 12.5/ E 12.5/140 SNT E 12.5/ / CC 12.5/ E 5/140 SNT / / E 12.5/150 SNT / / CC 13/ E 5/150 SNT / / E 12.5/ CC/W /160 SNT / / CC 14/ E 5/160
8 Plummer da db A A1 A2 Ca Da H H1 H2 J L N N1 G Appropriate bearing Size/TWO Nos. per Housing SNT / / CC 14.5/ E 5/170 SNT / / E 12/ CC/W /180 SNT / / CC 14.5/ E 5/180 SNT / / E 13.5/ CC/W33 5.1/200 SNT / / CC 17.5/ E 6.5/200 SNT / E 14/ CC/W33 5/215 SNT E 19.5/ E 6.5/ CC 19.5/ E 6.5/215 SNT / E 13/ CC/W33 5/230 SNT CC/W33 15/ CC/W33 5/250 SNT CC/W / CC/W33 5/270 SNT CC/W33 17/ CC/W33 5/290 73
ILLUSTRATION FOR THD SERIES
ILLUSTRATION FOR THD SERIES THD THD type housings are widely used for take-up pulley for conveyor belt tensioning application. At top & bottom of the housings suitable grooves are provided to facilitate
More informationSplit plummer block housings SE 2, 3, 5 and 6 series
Split plummer block housings SE 2, 3, 5 and 6 series 3 Bearing types Self-aligning ball bearings Spherical roller bearings CARB toroidal roller bearings Bearing dimension series 02, 03, 22, 23, 32 Shaft
More informationSplit plummer block housings SNLN 30 series
Split plummer block housings SNLN 30 series 4 Bearing types Spherical roller bearings CARB toroidal roller bearings Bearing dimension series 30, 40 Shaft diameter range 110 to 280 mm Typical shaft-bearing
More informationBearings for Fans. Bearing arrangements for fans
1.1.1. Bearings for Fans Bearing arrangements for fans Summary The large variety of fans can be classified in different ways. Generally, there are two categories that are based on the fan s directions
More informationSNL plummer block housings. solve the housing problems
SNL plummer block housings solve the housing problems Contents The SKF brand now stands for more than ever before, and means more to you as a valued customer. While SKF maintains its leadership as the
More informationSplit plummer block housings SONL series
Split plummer block housings SONL series Bearing types Self-aligning ball bearings Spherical roller bearings CARB toroidal roller bearings Bearing dimension series 22 Shaft diameter range 75 to 240 mm
More informationFlanged housings FNL series
Flanged housings FNL series Bearing types Self-aligning ball bearings Spherical roller bearings CARB toroidal roller bearings Bearing dimension series 02, 22 FNL flanged housings are well-proven machine
More informationSplit pillow blocks SDAF series including the extended range (inch dimensions)
Split pillow blocks SDAF series including the extended range (inch dimensions) Bearing types Spherical roller bearings CARB toroidal roller bearings Bearing dimension series 22, 23 (SDAF) 30, 31, 32 (SDAF
More informationSD Plummer Block Housings
SD Plummer Block Housings SD Series 31.. + 30.. housings are split plummer blocks for spherical roller bearings with adapter sleeves. They are fitted with labyrinth seals. Housings for shaft ends are supplied
More informationHome at last. The new FNL fl anged bearing housing
Home at last The new FNL fl anged bearing housing Approved by the family Previously it was blue-green. Yet was seen as the black sheep of the family. Now it s the other way around. FNL offers everything
More informationTIMKEN SNT SPLIT PLUMMER BLOCKS
TIMKEN SNT SPLIT PLUMMER BLOCKS TIMKEN SNT SPLIT PLUMMER BLOCKS 1 TABLE OF CONTENTS INTRODUCTION... 3 TIMKEN SNT SPLIT PLUMMER BLOCKS...4 SEAL OPTIONS AND DESCRIPTIONS...6 SEAL SELECTION AND CONFIGURATION
More informationPRODUCT CATALOG BEARING HOUSINGS In-house Manufacturing.
PRODUCT CATALOG BEARING HOUSINGS In-house Manufacturing. Individually Optimized Bearings. Significant Price Advantage. SIMPLY WELL- ENGINEERED PRODUCT CATALOG BEARING HOUSINGS 4 LFD BEARING HOUSINGS Product
More informationCONTENTS. DODGE Plummer Blocks
CONTENTS DODGE Plummer Blocks Features/Benefits.......................................... B12-2 How To Order............................................. B12-4 Nomenclature.............................................
More informationSNL 30, SNL 31 and SNL 32 plummer block housings. solves the housing problems
SNL 30, SNL 31 and SNL 32 plummer block housings solves the housing problems Contents The SKF brand now stands for more than ever before, and means more to you as a valued customer. While SKF maintains
More informationSplit plummer block housings SED 30, 31, 32 and 39 series
Split plummer block housings SED 30, 31, 32 and 39 series Bearing types Spherical roller bearings Bearing dimension series 30, 31, 32 and 39 Shaft diameter range 430 to 900 mm Typical shaft-bearing combinations
More informationDodge ISN mounted spherical roller bearings
Engineered for reliability and long life Easy to install and remove Factory sealed and greased Patented sealing system for extended life Patented integral adapter mounting and dismounting system No shaft
More informationA basic layout diagram of a papermaking machine is shown below :
Introduction : A papermaking machine consists of the following sections : A wire and press section (the wet section) A drier section A calender & 4. A reeler A basic layout diagram of a papermaking machine
More informationHousings for paper machines SBFN, SBPN and SDM series
Housings for paper machines SBFN, SBPN and SDM series Bearing types Spherical roller bearings CARB toroidal roller bearings Bearing dimension series 22, 23, 31 (SBFN series) 31 (SBPN series) 30, 31 (SDM
More informationSNN SPLIT PLUMMER BLOCKS
SNN SPLIT PLUMMER BLOCKS SNN SPLIT PLUMMER BLOCKS FROM NSK The SNN split plummer block from NSK combines quality materials and design to maximize bearing performance. With features like serialized cap
More informationTYPE OF MOUNTED BEARING. LER - Metal Labyrinth Ends Open. Pillow Block. (Inch Dimensions) 2 = 2 SS - Split P4B - 4 Bolt Base Pillow
IMPERIAL - ISAF NOMENCLATURE Complete Pillow Block - Inch P2B - 515 - USAF - 207 - TT HOUSING STYLE BEARING SERIES AND HOUSING SIZE TYPE OF MOUNTED BEARING SIZE INCHES SEAL TYPE UNIFIED SAF Plummer Blocks
More informationDESIGN AND SELECTION OF BEARINGS AND HOUSINGS USED IN MATERIAL HANDLING APPLICATIONS
DESIGN AND SELECTION OF BEARINGS AND HOUSINGS USED IN MATERIAL HANDLING APPLICATIONS SPHERICAL ROLLER BEARINGS M. STEWART-LORD MANAGER - APPLICATION ENGINEERING SKF SOUTH AFRICA (PTY) LTD (SA) Spherical
More informationSplit Pillow Block Housings & Accessories
Split Pillow Block Housings & Accessories TABLE OF CONTENTS How to Order and Seal Types for SNN. 2 How to Order and Seal Types for SAFD...3 Features and Benefits of SNN and SAFD. 4 Clearance Adjustment
More informationSPLIT CYLINDRICAL ROLLER BEARINGS
SPLIT CYLINDRICAL ROLLER BEARINGS PERFORMANCE SOLUTIONS RANGE OF HOUSINGS Engineered to perform Standard support with complete housing and bearing Flange support Take up tension unit complete with housing
More informationPRODUCT FOCUS COOPER SPLIT ROLLER BEARING KNOW MORE SELL MORE WIN MORE ISSUE 131
COOPER SPLIT ROLLER BEARING Cooper pioneered the manufacture of the split roller bearing in 1907 (109 years ago). They are still the world leader in the split bearing market. The sealing arrangement is
More informationUC-SERIES TIMKEN BALL BEARING HOUSED UNITS
UC-SERIES TIMKEN BALL BEARING HOUSED UNITS UC-SERIES TIMKEN BALL BEARING HOUSED UNITS Introduction...3 Features...4 Housing Styles...5 Nomenclature...6 Technical Data...7 Installation...4 HOUSED UNIT TABLES
More informationSplit pillow blocks
Definition an capabilities 638 Series 639 Variants 639 Design criteria: loas an torques 640 Installation/Assembly criteria: seal selection 641 Characteristics 642 Pillow block housing for bearings with
More informationHeavy Duty Pillow Block
Heavy Duty Pillow Block Maintenance Handbook Catalogue No. CDN995 SKF Canada Limited AN ISO 9001 REGISTERED COMPANY Proud recipient of The Canada Awards for Excellence Certificate of Merit General Information
More informationAssembly and Maintenance Instructions. Pad Thrust Bearings
Assembly and Maintenance Instructions for Pad Thrust Bearings 1. General Assembly Regulations The bearings are delivered as fully assembled units. Roller bearings are pre-lubricated at the factory with
More informationPLUMMER BLOCK HOUSINGS
9. BASIC STRUCTURE OF FBJ Bearing Unit / Insert PLUMMER BLOCK HOUSINGS STRUCTURE OF PLUMMER BLOCK HOUSINGS 9 0. MATERIALS AND MACHINING TOLERANCES Plummer Block Housings are cast and produced in accordance
More informationMotion Technologies Bearing Products
Page 1 of 12 Motion Technologies Bearing Products LARGE DIAMETER BEARINGS (conventional design) o Deep groove ball to 1900mm bore page 3 o Four point contact ball to 500mm bore page 3 o Single row angular
More informationRHP PLUMMER BLOCK HOUSINGS AND ACCESSORIES
RHP PLUMMER BLOCK HOUSINGS AND ACCESSORIES 2 SUMMARY General points, technical characteristics 2 3 SN500 Series 4 7 SN600 Series 8 11 SNU 500-600 Series 12 15 SD3100 Series 16 17 Sleeves (metric and inch)
More informationBEARING UNITS BEARINGS LINEAR MOTION PRODUCTS
Motion Creator BEARING UNITS BEARINGS LINEAR MOTION PRODUCTS L ATELIER DE FABRICATION MANUFACTURING WORKSHOP 2 Multi spindle Machining Centers 2 Axis 4 Multi spindle machining Centers 3 Axis 2 Multi spindle
More informationGuide blocks for ISO/VDMA cylinders
Actuators Guide blocks or ISO/VDMA cylinders QA/8/51/ QA/8/61/ QA/8/81/ (long coupling) QA/8/85/ (short coupling) Ø 32 to 1 mm QA/8/61/ QA/8/51/ Conorms to ISO 6431, VDMA 24562 and NFE 49 3 1 Ensures protection
More informationDODGE USN 500 and 600 Series Adapter Mount & 200 and 300 Series Direct Mount Plummer Blocks
DODGE USN 500 and 600 Series Adapter Mount & 200 and 300 Series Direct Mount Plummer Blocks These instructions should be read thoroughly before installation or operation. GENERAL INFORMATION WARNING: To
More informationCLASSIFICATION OF ROLLING-ELEMENT BEARINGS
CLASSIFICATION OF ROLLING-ELEMENT BEARINGS Ball bearings can operate at higher speed in comparison to roller bearings because they have lower friction. In particular, the balls have less viscous resistance
More informationDODGE USAF 500 SERIES Pillow Blocks
INSTRUCTION MANUAL for ADAPTER MOUNTED DODGE USAF 500 SERIES Pillow Blocks WARNING: Because of the possible danger to person(s) or property from accidents which may result from the improper use of products,
More informationCONVEYOR COMPONENTS: Baldor Dodge ISAF HYD & ISNX Bearings for Conveyor Pulleys
CONVEYOR COMPONENTS: Baldor Dodge ISAF HYD & ISNX Bearings for Conveyor Pulleys CO Engineering Conveyor Components November 19, 2012 Baldor Dodge has a bearing product, ISAF HYD & ISNX that provides a
More informationMultimar. Universal Gage 844 T for external and internal dimensions
- 10-4 Multimar. Universal Gage 844 T for external and internal dimensions The Universal Gage Multimar 844 T. Easy to use and versatile; ideal for all your measuring requirements in dimensional metrology.
More informationSPECIFICATIONS. Housing
SPECIFICATIONS Housing Grade 30 cast iron is the standard housing material except on SAFS housings. When steel housings are required, the SAFS bearing line is recommended. SPECIAL DRILLING The standard
More informationHORIZONTAL SPLIT CASING PUMP
HORIZONTAL SPLIT CASING PUMP HORIZONTAL PUMP CONSTRUCTION MBH Horizontal Split Casing Pumps - a new concept for better performance and higher efficiencies. For greater interchangeability and ease of maintenance,
More informationDismounting. Removing seals Removing non-contact seals Removing contact seals
Dismounting Dismounting rolling bearings... 254 What to remember... 254 Preparations prior to dismounting... 254 Appropriate dismounting methods... 255 Dismounting a bearing fitted on a cylindrical shaft
More informationGoulds 3186 High-temperature/Pressure Paper Stock/ Process Pumps
Lenntech info@lenntech.com Tel. +31-152-610-900 www.lenntech.com Fax. +31-152-616-289 Goulds 3186 High-temperature/Pressure Paper Stock/ Process Pumps Goulds 3186 Designed to Handle High Temperature and
More informationA90 Series Correspondence Lessons PART F. Transmission Bearings
A90 Series Correspondence Lessons PART F Transmission Bearings Lesson A9015 Wide Inner Ring Bearings and Housings Lesson A9016 Plummer Blocks/Housings/Sleeves Lesson A9017 Cooper Split Bearings Lesson
More informationSD COMPATIBLE HEAVY DUTY BEARINGS
T e c h n i c a l I n f o r m at i o n SD COMPATIBLE Bearing types The 08 Series is supplied in two standard forms: the fixed (GR) type and the expansion (EX) type. Fixed (GR) Bearing The fixed (GR) type
More informationDODGE USAF 500 SERIES Pillow Blocks
INSTRUCTION MANUAL for ADAPTER MOUNTED DODGE USAF 500 SERIES Pillow Blocks WARNING: Because of the possible danger to person(s) or property from accidents which may result from the improper use of products,
More informationBROWNING offers a broad and complete line of mounted roller bearing products to satisfy a large variety of rugged, industrial applications.
ROLLER BEARINGS Roller Bearing Family of Products BROWNING offers a broad and complete line of mounted roller bearing products to satisfy a large variety of rugged, industrial applications. Browning roller
More informationMTK+ Suffix and prefix overview. Deep groove ball bearings. Self-aligning ball bearings
TK+ Suffix and prefix overview uthor Kevin Drake Released by Koen Geeraerts Release date 26 June 2016 Document Id D-833 Version 1.2 Revision date 14 July 2016 Deep groove ball bearings Z Pressed steel
More informationSKF ConCentra roller bearing units for fast and reliable mounting
SKF ConCentra roller bearing units for fast and reliable mounting Now also including tables for inch assortment Contents The SKF brand now stands for more than ever before, and means more to you as a valued
More informationAIR CYLINDER Series A23, A24
A23 - Magnetic A24 - Non-magnetic Double Acting s (Square type) Ø32-125 mm As per ISO 15552 / VDMA 24562 standards. Features Adjustable cushioning at both ends with elastomer pads Wide varieties of mountings
More informationXFLO XS SERIES. Single Stage Double Suction Split Casing Centrifugal Pump
XFLO P U M P S XS SERIES Single Stage Double Suction Split Casing Centrifugal Pump General and Construction 1. Applications Waterworks, Irrigation, Drainage pumping stations, Power stations, Industrial
More informationTIMKEN SPHERICAL ROLLER BEARING OFFERING K EJ W33 C3. 2-Row SRB RIC
TIMKEN SPHERICAL ROLLER BEARING OFFERING 2 23 20 K EJ W33 C3 2-Row SRB Dimension Series Spherical roller bearings are broken down into a series based on their width (0, 1, 2, 3, 4) and outside diameter
More informationTHE ORIGINAL SPLIT ROLLER BEARING. Visit CooperBearings.com
OVERVIE W THE ORIGINAL SPLIT ROLLER BEARING Visit CooperBearings.com THE COMPANY Since inventing the split roller bearing in 1907, Cooper has become synonymous with the manufacture of quality, long-lasting
More informationZBD 1001 Differential Cylinder Data sheet 04.16/DS13210
ZBD 1001 Differential Cylinder Data sheet 04.16/DS13210 Description: This series represents the logical and consistent supplementation of already ISO 6022 (250 bar) and ISO 6020/1 (160 bar) standard series.
More informationGate valves Gate valve 700 HJ/JJ (GA PN 10-40) PN DN
Gate valves Gate valve 700 HJ/JJ (GA PN 10-40) PN 10-100 DN 50-150 Admissible operating pressure [bar] at design temperature [ C] Material PN -60-10 20 100 150 200 250 300 350 400 410 420 430 440 450 460
More informationDODGE USAF 200/300 Direct Mount Pillow Block Bearings
DODGE USAF 200/300 Direct Mount Pillow Block Bearings These instructions must be read thoroughly before installation or operation. This instruction manual was accurate at the time of printing. Please see
More informationModel: D5H TRACK-TYPE TRACTOR 8RC02018 Configuration: D5H & D5H LGP TRACTOR / POWER SHIFT / 8RC (MACHINE) POWERED BY 3304 ENGINE
Model: D5H TRACK-TYPE TRACTOR 8RC02018 Configuration: D5H & D5H LGP TRACTOR / POWER SHIFT / 8RC00001-03999 (MACHINE) POWERED BY 3304 ENGINE Disassembly and Assembly D5H AND D5H SERIES II TRACTORS POWER
More informationInstruction Manual for PTI Split Block Bearing Units For SAF, SDAF, SN, SNG, SNHF, S3000K & SD Series Housings
Instruction Manual for PTI Split Block Bearing Units For SAF, SDAF, SN, SNG, SNHF, S3000K & SD Series Housings Installation SDAF SD & S3000 SAF Warning: To ensure that the drive is not unexpectedly started,
More informationDesign specifications
Design specifications Design To relevant standards: IEC, VDE, DIN, ISO, EN With squirrel-cage or slipring rotor Degree of protection IP 55 / IP 65 Cooling method IC511, suitable for both indoor and outdoor
More informationForming section. Bearing arrangements...
www.bergab.ru Берг АБ skf@bergab.ru Тел.(495)-8-06-1,факс (495) 3-3071 Bearing arrangements.......... 4 www.bergab.ru Берг АБ skf@bergab.ru Тел.(495)-8-06-1,факс (495) 3-3071 The forming section is the
More informationSELECTION. UNIFIED Pillow Block - Spherical Roller Bearings (USAF 500, 600, 200, 300 SERIES AND USDAF 23000, 23100, 23200) SHAFT TOLERANCES Shaft Size
UNIFIED Pillow Block - Spherical Roller (USAF 500, 600, 200, 300 SERIES AND USDAF 23000, 23100, 23200) DODGE UNIFIED Spherical Roller have the capacity to carry heavy radial loads and combined radial and
More informationSUGGESTED SPECIFICATIONS
PART 1 - GENERAL 1.01 SCOPE A. Pumps to be supplied under this specification shall be of a severe duty, recessed cupped impeller design suitable for use in (SLUDGE, GRIT, ETC. APPLICATIONS) with a 20 year
More informationSealed SKF spherical roller bearings for demanding environments
Sealed bearings Page... 18 Page... 32 Sealed SKF spherical roller bearings for demanding environments Sealed SKF spherical roller bearings are designed to fulfil high demands on sealing efficiency and
More informationSKF ConCentra roller bearing units. The fast, easy, error-free way to install and remove plummer blocks
SKF ConCentra roller bearing units The fast, easy, error-free way to install and remove plummer blocks Combine industrial strength with the simplicity of plug and play The current situation To properly
More informationGoulds 3181 High-temperature/Pressure Paper Stock/ Process Pumps
High-temperature/Pressure Paper Stock/ Process Pumps Designed to Handle High Temperature and High Pressure Services of the Pulp & Paper Industries Capacities to 13,000 GPM (3000 m 3 /h) Heads to 410 feet
More informationProfile rollers PEVOLON PEVOLASTIC
Profile rollers 148 Profile rollers product overview Profile rollers FLANGED/GROOVED WHEELS We produce a variety of flanged and grooved wheels with different dimensions, bearing types and load capacities
More informationSKF Slide 1 SKF Mining, Mineral Processing & Cement
2008-03-21 SKF Slide 1 SKF solution for mine hoists SKF 1 Industrial Team 2008 SKF Mining, Mineral Processing and Cement 2008-03-21 SKF Slide 2 SKF solutions for mine hoists Bearings Seals Housings Sleeves
More informationSPARE PARTS BOOK. Front Axle FSDP-09/10-S. Book No. 201 (12/2009)
SPARE PARTS BOOK Front Axle S Sisu Axles, Inc. Autotehtaantie 1 PO Box 189 FIN-13101 Hameenlinna Finland Phone +358 20 55 2999 Fax +358 20 55 2900 1.12.2009 1 Axle L577 10 8 9 12 1 13 11 "A" "B" 6 5 1
More informationCOOPER ROLLER BEARINGS: IMPROVING PERFORMANCE AND CONTROLLING COST
COOPER ROLLER BEARINGS: IMPROVING PERFORMANCE AND CONTROLLING COST Cooper is a worldwide presence in marine engineering support. Its innovative products and expertise feature in ships ranging from waterjet-driven
More informationMOTION TECHNOLOGIES PTY LTD. Slew Ring Bearings
MOTION TECHNOLOGIES PTY LTD Slew Ring Bearings - Typical Types - Single Row, Four Point Contract, Ball - Flanged, Single Row Ball, 4 Point Contact - Double Flanged, Non-Geared - Double Row Ball Page 1
More informationSKF Cooper split bearings
SKF Cooper split bearings The company SKF Cooper is the leading supplier of split roller bearings, providing quality and long lasting products since 1907. Based in the UK, SKF Cooper designs and manufactures
More informationThermoplastic Centrifugal pump, Type NM
Thermoplastic Centrifugal pump, Type NM acc. to DIN 24256, EN 22858 and ISO 2858 Size: 32-125 up to 150-400 Capacity Q: up to 450 m 3 / h Head H: up to 100 m Operating temperature t: PE up to + 70 C PP
More informationSONL plummer block housings. Designed for oil lubrication
SONL plummer block housings Designed for oil lubrication Contents The SKF brand now stands for more than ever before, and means more to you as a valued customer. While SKF maintains its leadership as the
More information4 Self aligning ball bearings
Rolling bearings 4 Self aligning ball bearings Designs and variants... 538 Basic design bearings... 539 Bearings with an extended inner ring.. 540 Cages... 540 Sealing solutions... 540 Greases for sealed
More informationHome at last. The new FNL fl anged bearing housing
Home at last The new FNL fl anged bearing housing Approved by the family Previously it was blue-green. Yet was seen as the black sheep of the family. Now it s the other way around. FNL offers everything
More informationZPP and Z22 Double Suction Axially Split Single Stage Centrifugal Pumps
ZPP and Z22 Double Suction Axially Split Single Stage Centrifugal Pumps Main Applications Features and Benefits ZPP and Z22 double suction axially split single stage centrifugal pumps are used for demanding
More informationNTT CENTRIFUGAL PUMPS TO EN733 (DIN 24255) FOR HEAT TRANSFER OILS UP TO 350 C
FOR HEAT TRANSFER OILS UP TO 350 C WE HAVE ALL THE TICKS Version 1 - NTT: Rapid Allweiler Pumps Whilst all care has been taken to ensure the accuracy of the information contained in this brochure was correct
More informationGROUPCODE NEN : ANSI : STEEL BS : STEEL
RETAINING RINGS FOR BORES - NORMAL TYPE - ➁ DIN : 4 8 8 9 10 11 1 13 14 15 s 0,8 0,8 1 1 1 1 1 1 ring d3 8, 9,8 10,8 11,8 13 14,1 15,1 16, d4 3 3, 3,3 4,1 4,9 5,4 6,, d 8,4 9,4 10,4 11,4 1,5 13,6 14,6
More information3. BEARING ARRANGEMENT DESIGN
3. BEARING ARRANGEMENT DESIGN 3.1 GENERAL PRINCIPLES OF ROLLING BEARING ARRANGEMENT DESIGN Rotating shaft or another component arranged in rolling bearings is guided by them in radial as well as in axial
More informationPublication BCRKB.Rev00EN. RKB Europe SA 2018/07
BEARING CATALOGUE Publication BCRKB.Rev00EN RKB Europe SA 2018/07 Every care has been taken to ensure the accuracy of the information in the present document but no liability can be accepted fony errors,
More informationTHE ORIGINAL. SPLIT ROLLER BEARING Visit CooperBearings.com
OVERVIE W THE ORIGINAL SPLIT ROLLER BEARING Visit CooperBearings.com THE COMPANY Since inventing the split roller bearing in 1907, Cooper has become synonymous with the manufacture of quality, long-lasting
More informationGoulds 5150/VJC. Vertical Cantilever Bottom Suction Pumps
Goulds 5150/VJC Vertical Cantilever Bottom Suction Pumps 5150/VJC Vertical Cantilever Pumps Designed to Handle Corrosive/ Extremely Abrasive Slurries Capacities to 1817 m³/h 8000 GPM Heads to 79 m 260
More informationAIR CYLINDER Series A12, A13
A12 - Non magnetic A13 - Magnetic S Double Acting ( Ø32-100 ) mm As per ISO 6431 / CETOP RP43P, RP53P standards Features Adjustable cushioning at both ends Wide varieties of mountings Low friction Long
More informationBEARINGS. Tel:
BEARINGS We have broken up technology groups into five platforms: bearings and units, seals, mechatronics, services and lubrication systems. In doing that we have created a tailor-made offer to satisfy
More informationThe e-nsc End Suction Pump Series
NEW The e-nsc End Suction Pump Series Your go-to single-stage pump for heavy-duty use STANDARDIZED TO EN733, ISO 5199 AND DIRECTIVE 9/125/EC. POTABLE WATER APPROVED (ACS AND DM174). It s not your standard
More informationE1 Spherical Roller Bearings. The new standard for performance and operational reliability
E1 Spherical Roller Bearings The new standard for performance and operational reliability FAG s innovative E1 spherical roller bearing provides increased reliability, greater economic efficiency, and superior
More informationHigh-Temperature and Pressure Paper Stock / Process Pump
3186 High-Temperature and Pressure Paper Stock / Process Pump 3186 Designed to handle High-Temperature and High-Pressure services of the Pulp & Paper Industries. Capacities to 3000 m³/h (13,000 GPM) Heads
More informationRotary inlets for pressurised oil, compressed air
Rotary inlets for pressurised oil, compressed air Product data sheets Rotary inlets for pressure oil, single channel 0086-010-size-160 9.03.00 Rotary inlets for pressure oil, two- channel 0088-226/326-size-010040
More informationEdition 2 May Air Drill. 551 Series. Parts Information. Save These Instructions
16606097 Edition 2 May 2014 Air Drill 551 Series Parts Information Save These Instructions 551 Series Air Drill Diagram 16 110 111 113 114 112 Enlarged detail of Rubber-faced Throttle Valve 17 82 19 18
More informationFKL Bearings in Vibrating Screens
FKL Bearings in Vibrating Screens Bearings in Vibrating Screens: Vibrating screens are used for grading (i.e. separation of solid materials by grain size) of materials and other vibratory machinery such
More informationPremium Type E Mounted Roller Bearing
Rexnord Roller Bearings Rexnord 5000 Series Premium Type E Mounted Roller Bearing Get Your Bearings and Stay on Track Rexnord 5000 Series Premium Type E Mounted Roller Bearings help your equipment stay
More informationBROWNING TAPERED ROLLER BEARINGS 900/E920 SERIES. Tapered Roller Bearings PB900 PBE920 FEATURES/BENEFITS
Dimensionally Interchangable with most Type E s Allow for Combination Radial and Thrust Loads Eccentric Lock Collar PB900 Centrap Labyrinth Seal One Piece Ductile Iron Housing Elongated Bolt Holes to Facilitate
More informationNormpumpen nach DIN EN 733 einschl Standard horizontal pumps to DIN EN 733 NORMA J ( ) PUMPS I MOTORS I SYSTEMS I SERVICES
NORMA J ( ) PUMPS I MOTORS I SYSTEMS I SERVICES Introduction Pumps of the Norma J ( ) Series are horizontal volute casing centrifugal end suction pumps with Back Pull-out feature. Principal dimensions
More information2008 F-Super Duty Workshop Manual
13. Remove the mainshaft rear bearing cover. Inspect the mainshaft rear bearing cup for wear and damage. Install a new one as needed. Remove and discard the mainshaft rear bearing cover oil seal. 14. Remove
More informationSN SN 600 SN SN 300
SNG 500 - SNG 600 SNU 500 - SNU 600 SNA 500 - SNA 600 SN 500 - SN 600 SN 200 - SN 300 SD 3100 SD 3000 114 DISPOSITIFS D'ÉTANCHÉITÉ - SEALING ARRANGEMENTS Joint en polyuréthane TSNG pour: SNG-SNU TSNG polyurethan
More informationSKF Slide 1 SKF Mining, Mineral Processing & Cement
2008-03-21 SKF Slide 1 SKF solutions for conveyors Presented by SKF 1 Industrial Team 2008 SKF Mining, Mineral Processing and Cement 2008-03-21 SKF Slide 2 SKF solutions for conveyors Bearings ConCentra
More informationElite. KSB Australia Pty Ltd. Centrifugal Pump
Type Series Booklet Elite Centrifugal Pump Application The Ajax Elite centrifugal pump is suitable for handling water and similar liquids mainly used in the following applications. -Water Supply -Air conditioning
More informationMK-5000G exploded VieW
Frame accessories 38 cutting head Pump Assembly 39 connecting linkage foot pedal linkage 40 curtain blade guard 41 ENGINE Assembly 42 PARTS LIST A Frames - - A1 Frame, MK-5000 Main 1 155541 B Pivot Bracket
More informationBulletin C Dean Pump Division. Heavy Duty, High Temperature Process Pumps. R4140 Telescoping Guard. R4140 C-Face Motor Support
Bulletin C 1.4.43 Dean Pump Division Heavy Duty, High Temperature Process Pumps R4140 Telescoping Guard R4140 C-Face Motor Support Dean Pump Series R Centrifugal Process Pumps Capacities to 5000 GPM (1135
More informationHigh-pressure pumps Series HP49
High-pressure pumps Series HP49 www.andritz.com/pumps General Description / Application Multi-stage high pressure pumps for water supply, irrigation and industrial applications, for hot and cold water
More informationAgricultural Chain ISO 487/DIN 8189 and Works Standard
ISO 487/DIN 8189 and Works Standard 1 ISO 487 Connecting Links ISO STD Extra Pitch Pitch Inside Over Roller Pin Bush Over Plate Minimum Weight No No No No No No Strength Inch mm Width Inner Dia Dia Dia
More information