INCANDESCENT COPPER-FREE ALUMINUM FIXTURES
|
|
|
- Silas Leonard
- 5 years ago
- Views:
Transcription
1 KILLARK Z A H LO C WEATHERPROOF INCANDESCENT COPPER-FREE ALUMINUM S Enclosed & Gasketed - File E27731 Certified - File LR11851 INTRODUCTION AND ORDERING INFORMATION V Series Enclosed & Gasketed Applications Locations requiring durable, protected lighting fixtures Wet and dirt laden locations Industrial environments requiring enclosed and gasketed (vapor tight) fixtures Fixtures intended for base-up mounting Heat resistant glass globes recommended for wet locations Features Electrostatically applied epoxy/polyester finish Modular design Hubs are threaded for attachment to conduit Set screws in pendant fixture Copper-free aluminum (less than.004%) PENDANT MOUNT WITH VGA SPLICE NDANT W/ W/ 1/2 VUAG-1-k VUAGG-1-j VGA-1 VFC- VCG- VAG- 3/4 VUAG-2-k VUAGG-2-j VGA-2 VFC- VCG- VAG- 1/2 VUAG-1-k VUAGG-1-k VGA-1 VFC- VCG- VAG- 3/4 VUAG-2-k VUAGG-2-k VGA-2 VFC- VCG- VAG- CEILING MOUNT WITH FEET USING VBC SPLICE AND VBA W/ W/ / 1/2 VUXG-1-j VUXGG-1-j VBC-1 + VBA VFC- VCG- VAG- 3/4 VUXG-2-j VUXGG-2-j VBC-2 + VBA VFC- VCG- VAG- 1/2 VUXG-1-k VUXGG-1-k VBC-1 + VBA VFC- VCG- VAG- 3/4 VUXG-2-k VUXGG-2-k VBC-2 + VBA VFC- VCG- VAG- CEILING MOUNT WITH VGX SPLICE W/ W/ 1/2 VUXG-1-k VUXGG-1-k VGX-1 VFC- VCG- VAG- 3/4 VUXG-2-k VUXGG-2-k VGX-2 VFC- VCG- VAG- 1/2 VUXG-1-k VUXGG-1-k VGX-1 VFC- VCG- VAG- 3/4 VUXG-2-k VUXGG-2-k VGX-2 VFC- VCG- VAG- CEILING MOUNT WITH VGC SPLICE - FEED THROUGH W/ W/ 1/2 VUXG-1-k VUXGG-1-k VGC-1 VFC- VCG- VAG- 3/4 VUXG-2-k VUXGG-2-k VGC-2 VFC- VCG- VAG- 1/2 VUXG-1-k VUXGG-1-k VGC-1 VFC- VCG- VAG- 3/4 VUXG-2-k VUXGG-2-k VGC-2 VFC- VCG- VAG- * For other colors, order globes and fixture components separately. j Fixture supplied as component unit pack when ordered by this catalog number. k Catalog number for ordering convenience; fixture is shipped as components as listed in catalog number table. L198
2 KILLARK WEATHERPROOF H A Z LO C INCANDESCENT COPPER-FREE ALUMINUM S ORDERING INFORMATION CEILING MOUNT WITH VGH SPLICE - DEAD END W/ W/ 1/2 VUHG-1-k VUHGG-1-k VGH-1 VFC- VCG- VAG- 3/4 VUHG-2-k VUHGG-2-k VGH-2 VFC- VCG- VAG- 1/2 VUHG-1-k VUHGG-1-k VGH-1 VFC- VCG- VAG- 3/4 VUHG-2-k VUHGG-2-k VGH-2 VFC- VCG- VAG- CEILING MOUNT WITH VXA DEEP 5 - SPLICE W/ W/ 1/2 VXAG-110k VXAGG-110j VXA-1 VFC- VCG- VAG- 3/4 VXAG-210k VXAGG-210k VXA-2 VFC- VCG- VAG- 1/2 VXAG-120k VXAGG-120k VXA-1 VFC- VCG- VAG- 3/4 VXAG-220k VXAGG-220k VXA-2 VFC- VCG- VAG- CEILING MOUNT WITH VBA FOR ROUND OUTLET W/ W/ 1/2 VOB-j VOBG-j VBA VFC- VCG- VAG- 3/4 VOB-k VOBG-j VBA VFC- VCG- VAG- CEILING MOUNT WITH VFPS FOR SQUARE OR OCTAGON OUTLET W/ W/ 1/2 VFCA-j VFCAG-k VFPS VFC- VCG- VAG- 3/4 VFCA-k VFCAG-k VFPS VFC- VCG- VAG- NOTES: Mounts directly to steel 4 square and 3-1/2 or 4 octagon outlet box. Supplied with gasket. * For other colors, order globe and fixture components separately. j Fixture supplied as component unit pack when ordered by this catalog number. k Catalog number for ordering convenience; fixture is shipped as components as listed in catalog number table. SEE SOFTWARE FOR LATEST LED PHOTOMETRY L199
3 KILLARK Z A H LO C WEATHERPROOF INCANDESCENT COPPER-FREE ALUMINUM S ORDERING INFORMATION WALL MOUNT WITH FEET USING VBC SPLICE AND VB ELBOW W/ W/ /ELBOW 1/2 VFBG-1-j VFBGG-1-j VBC-1+VB-1 VFC- VCG- VAG- 3/4 VFBG-2-j VFBGG-2-j VBC-2+VB-2 VFC- VCG- VAG- 1/2 VFBG-1-k VFBGG-1-k VBC-1+VB-1 VFC- VCG- VAG- 3/4 VFBG-2-k VFBGG-2-k VBC-2+VB-2 VFC- VCG- VAG- WALL MOUNT WITH VB ELBOW TO MOUNT TO 4 OUTLET W/ W/ ELBOW Mounts directly to VJ or VB Series or 4 steel outlet boxes. One hub in back, supplied with gasket. 1/2 VFBG-110k VFBGG-110j VB-1 VFC- VCG- VAG- 3/4 VFBG-210k VFBGG-210j VB-2 VFC- VCG- VAG- 1/2 VFBG-120k VFBGG-120k VB-1 VFC- VCG- VAG- 3/4 VFBG-220k VFBGG-220k VB-2 VFC- VCG- VAG- WALL MOUNT-WITH VFL ELBOW FOR DIRECT MOUNT TO SPLICE ES W/ W/ ELBOW - VOBL-k VOBLG-j VFL VFC- VCG- VAG- - VOBL-k VOBLG-k VFL VFC- VCG- VAG- STANCHION MOUNT FOR 1-1/4 THREADED PIPE W/ W/ ELBOW 1-1/4 VD-410Gj VD-410GGj VD-4 VFC- VCG- VAG- 1-1/4 VD-420Gk VD-420GGk VD-4 VFC- VCG- VAG- *For other colors, order globe and fixture components separately. j Fixture supplied as component unit pack when ordered by this catalog number. k Catalog number for ordering convenience; fixture is shipped as components as listed in catalog number table. L
4 KILLARK H A Z LO C INCANDESCENT NEMA 4 - CLASS I, DIV. 2 ALUMINUM S Class I, Div. 2, Groups A,B,C,D Class I, Zone 2, Groups IIC,IIB,IIA NEMA 3, 4* - File E10514 UL-1571 Standard for incandescent fixtures UL-844 Standard for hazardous location fixtures Certified - File LR11713 Pendant Ceiling FEATURES-SPECIFICATIONS Applications Killark V Series Vaportight fixtures are now available Third Party Certified for use in certain hazardous as well as wet locations which require durable, protected lighting fixtures. Wet and dirt laden industrial environments such as walkways, tunnels, loading docks, stairwells, etc. made hazardous by the presence of flammable vapors as defined by the NEC. Fixtures intended for base-up mounting only. Heat resistant (tempered) glass globes recommended for wet locations*. * Wet location when used with tempered glass. APPLICATION DATA j A-19 60W A-19 70W A-19 W A-21 W A W A W PS W A-23 W PS-25 W PS W j Suitability based on base up installation TEMPERATURE 40 C T2C (230 C) T2D (215 C) T2A (280 C) T2B (260 C) T2 (300 C) T2A (280 C) T2B (260 C) T2 (300 C) T2A (280 C) (350 C) Features Killark Vaportight assemblies using VXFC bodies & tempered glass have all the features & advantages of V Enclosed & Gasketed models plus: Heavy-duty silicone gasketing for NEMA 4 requirements Third party tested & labeled for use in C1D2 areas Modular design permits selection of splice box, fixture body, globe, guard and reflector for specific or custom applications Existing V Series mounting boxes may be retrofitted to upgrade to NEMA 4; C1D2 suitability Copper-free aluminum construction with electrostatically applied epoxy/polyester finish resists corrosion SEE SOFTWARE FOR LATEST LED PHOTOMETRY L201
5 KILLARK Z A H LO C INCANDESCENT NEMA 4 - CLASS I, DIV. 2 ALUMINUM S FEATURES-SPECIFICATIONS PENDANT MOUNT WITH VGA SPLICE W/ CEILING WITH VGX SPLICE W/ 1/2 VUAGG-1-PXj VGA-1 VXFC- N34 VCGP- VAG- 3/4 VUAGG-2-PX j VGA-2 VXFC- N34 VCGP- VAG- 1/2 VUAGG-1-PX j VGA-1 VXFC- N34 VCGP- VAG- 3/4 VUAGG-2-PX j VGA-2 VXFC- N34 VCGP- VAG- 1/2 VUXGG-1-PX j VGX-1 VXFC- N34 VCGP- VAG- 3/4 VUXGG-2-PX j VGX-2 VXFC- N34 VCGP- VAG- 1/2 VUXGG-1-PX k VGX-1 VXFC- N34 VCGP- VAG- 3/4 VUXGG-2-PX k VGX-2 VXFC- N34 VCGP- VAG- CEILING WITH FEET USING VBC SPLICE & VBA WALL WITH FEET USING VBC SPLICE & VB ELBOW W/ STANCHION MOUNT FOR 1-1/4 THREADED PIPE W/ W/ / / /ELBOW * For other colors, order globes and mounting components separately. j Fixture supplied as component unit pack when ordered by this catalog number. k NEMA 3, 4 when used with tempered glass. 1/2 VUXBGG-1-PX j VBC-1+VBA VXFC- N34 VCGP- VAG- 3/4 VUXBGG-2-PX j VBC-2+VBA VXFC- N34 VCGP- VAG- 1/2 VUXBGG-1-PX j VBC-1+VBA VXFC- N34 VCGP- VAG- 3/4 VUXBGG-2-PX j VBC-2+VBA VXFC- N34 VCGP- VAG- 1-1/4 VD-410GGPX j VD-4 VXFC- N34 VCGP- VAG- 1-1/4 VD-420GGPX j VD-4 VXFC- N34 VCGP- VAG- 1/2 VFBGG-1-PX j VBC-1 + VB-1 VXFC- N34 VCGP- VAG- 3/4 VFBGG-2-PX j VBC-2 + VB-2 VXFC- N34 VCGP- VAG- 1/2 VFBGG-1-PX j VBC-1 + VB-1 VXFC- N34 VCGP- VAG- 3/4 VFBGG-2-PX j VBC-2 + VB-2 VXFC- N34 VCGP- VAG- L202
6 KILLARK H A Z LO C COMPONENT PARTS/ACCESSORIES INCANDESCENT S VFC- VXFC- N34 j VFC- VXFC- N34 j VFC Fixture Bodies Fixture bodies contain lamp receptacle and are threaded to accept globes, guards and reflectors. These fixture bodies are designed for metallic boxes and mount directly to V Series splice boxes. They may also be mounted to VJ Series, VB Series or other 4 outlet boxes with the use of the appropriate adapter plate. Each fixture body is supplied with gaskets. VFC- VFC- VXFC- N34 VXFC- N34 V BODIES 150W max. Enclosed & Gasketed Fixture Boby 300W max. Enclosed & Gasketed Fixture Boby 150W max. NEMA 3,4 - Class I, Div. 2 Fixture Body j 300W max. NEMA 3,4 - Class I, Div. 2 Fixture Body j j Use VXFC body with tempered globe for NEMA 3, 4 - Class I, Div. 2 applications. VXFC body is Class I, Div. 2 only (not N3, N4) when used with standard globes. Consult temperature table for suitability. VGA VGC VGH VGX V Splice Boxes For use with types and fixture bodies V SPLICE ES & QTY. VGA-1 1/2 1 VGA-2 3/4 1 VGH-1 1/2 1 VGH-2 3/4 1 VGC-1 1/2 2 VGC-2 3/4 2 VGX-1 1/2 4 VGX-2 3/4 4 VXA-1 1/2 5 VXA-2 3/4 5 Pendant mount Ceiling mount Ceiling mount Ceiling mount Ceiling mount, deep box VBC-1* 1/2 4 Ceiling mount, with 3 close-up plugs (requires VBA VBC-2* 3/4 4 Adapter) VXAB - - Blank close-up plate (less gasket) VXA VBC * Volume cu. in. is 18. VBA VFPS VBA VFPS V PLATES Adapts fixture body to VB, VJ or steel 3-1/2 & 4 splice boxes. Supplied with gasket. Adapts fixture body to steel 4 square outlet boxes or 3-1/2 or 4 octagon boxes VB VFL VD V BRACKETS QTY. VB-1 1/2 1 Wall mount to VJ or VB boxes VB-2 3/4 1 Wall mount to VJ or VB boxes VFL Wall mount to V boxes directly or to VJ, VB boxes with VBA adapter VD-4 1-1/4 1 Stanchion mount SEE SOFTWARE FOR LATEST LED PHOTOMETRY L203
7 KILLARK Z A H LO C COMPONENT PARTS/ACCESSORIES INCANDESCENT S 150 W Max. Lamp Size A-21 Polycarbonate 300 W Max. Lamp Size PS-25 Poly Color Globe V GLASS S 150 W A W PS-25 j Recommended for use with VXFC fixture base. k TM Thomas Manufacturing. VCG- VCG- Clear VCGP- VCGP- Clear Tempered. Thermal and shock resistant j VCGPT- Clear Tempered with silicone coating k VAMG- VAMG- Amber VAMGP- Amber Tempered j VGG- VGG- Blue Green VGGP- VGGP- Blue Green Tempered j VBG- Blue VBGP- Blue Tempered j VRG- VRG- Ruby VRGP- VRGP- Ruby Tempered j VRSG- Green VPG- Purple VWG- White Glass VWGP- White Tempered Glass 75 W A W A-21 Polycarbonate. Cannot be used with guard or in high ambient VPLCG- VPLCG- temperature locations (40 C/104 F max.) Not UL Listed. VAG- VAG- VPRSD- VPRSD- Series Vaportite Reflector Series Vaportite Reflector V S Series Vaportite guard Series Vaportite guard V REFLECTORS 16 3/8 Dia. 5 5/8 High. White polypropylene for pendant & ceiling applications. Not for use with wall or stanchion models. Body To Splice Box Gasket or Series VTG Standard VTG-S Silicone (pictured) GASKET SERIES SERIES VTG VFC Fixture body to splice box VTG-S VXFC Silicone, Fixture body to splice box VBNB Replacement Gaskets for VB-1/VB-2 and VBA 15871AABB VTGG VFC Globe gasket VTGG1-S VTGG2-S VFXC Silicone, globe gasket Globe Gasket Series Standard AABB Series Standard - VTGG (pictured) Series Silicone - VTGG1-S Series Silicone - VTGG2-S V SOCKET VRME For fixture types and L204
8 KILLARK H A Z LO C DIMENSIONS V Fixture w/o Splice Box VGA VGC VGX VGH V Fixture Globes 106 hole.28 dia. (8) 5 (127) VBC-1 & VBC-2 VFL VXA VB V Stanchion SEE SOFTWARE FOR LATEST LED PHOTOMETRY L205
Code Master Incandescent Factory Sealed Luminaires Explosionproof, Dust-Ignitionproof For use with threaded metal conduit.
Applications For use in hazardous locations such as plants where plastics, paints, thinners and petrochemicals are manufactured. For use in chemical and petrochemical plants, such as manufacturers of plastics,
INCANDESCENT/COMPACT FLUORESCENT/MEDIUM BASE HID
KILLARK INCANDESCENT/COMPACT FLUORESCENT/MEDIUM BASE HID Class I, Div. 1 & 2, Groups C,D Class I, Zones 1 & 2, Groups llb, lla Class II, Div. 1 & 2, Groups E,F,G Class III, Div. 1 & 2 Suitable for wet
COMPACT FLUORESCENT EMERGENCY FIXTURES
KILLARK H A Z LO C COMPACT FLUORESCENT EMERGENCY FIXTURES VE3Q/VE4Q Class I, Div. 2, Groups A,B,C,D Class l, Zone 2, Groups IIC, llb, lla Class II, Div. 1 & 2, Groups E,F,G Class III NEMA 3, 4, 4X IP66
MOGUL BASE HID FIXTURES
KILLARK Z A H LO C MOGUL BASE HID FIXTURES Class I, Div. 1 & 2 Groups C,D Class l, Zone 1 & 2, Groups llb,lla Class l, Zone 1, AEx d IIB Class II, Div. 1 & 2, Groups Class III, Div. 1 & 2 Suitable for
LOW PROFILE LINEAR ALUMINUM LED EXCLUSIVE DESIGN FEATURES
L KILLARK TI IGH NG HA Z LO C LOW PROFILE LINEAR ALUMINUM LED EXCLUSIVE DESIGN FEATURES High temperature rated silicone gasketing provides Type 4X & IP66 sealing. Diffused Clear 2 Lens Choices: Clear for
LOW PROFILE LINEAR ALUMINUM LED EXCLUSIVE DESIGN FEATURES
KILLARK Z A H LO C LOW PROFILE LINEAR ALUMINUM LED EXCLUSIVE DESIGN FEATURES High temperature rated silicone gasketing provides NEMA 4X & IP66 sealing. Diffused 2 Lens Choices: Clear for maximum lumens
FLUORESCENT BI-PIN/MEDIUM BASE HID
KILLARK Z A H LO C FLUORESCENT BI-PIN/MEDIUM BASE HID Cass I, Div. 2, Groups A,B,C,D* Cass, Zone 2, Groups C,B,A Cass II, Div. 1 & 2, Groups E,F,G* Cass III Suitabe for wet ocations Marine Rated (US Ony)
SAFR LED SERIES S A F R L E D. Hazardous Location LED Luminaire
SAFR LED SERIES Hazardous Location LED Luminaire Class I, Division 2, Groups A, B, C & D Class II, Division & 2, Groups E, F & G Class III Class I, Zone 2, Groups IIA, IIB & IIC UL 8750 LED Safety UL 844
KH Series Kemlux III Enclosed/Gasketed
For use in corrosive, harsh, hazardous applications such as chemical, petrochem, marine, power generation, pharmaceutical, or food processing plants Mogul base socket on tanks C, D & E Medium base socket
SAF SERIES Hazardous Location Mogul Base HID and Compact Flourescent
SAF SERIES Hazardous Location Mogul Base HID and Compact Flourescent S A F Class I, Division 2, Groups A, B, C & D Class II, Division 1 & 2, Groups E, F & G Class III Zone 2, Groups IIA, IIB & IIC UL 844
SAF SERIES Hazardous Location Mogul Base HID and Compact Flourescent
SAF SERIES Hazardous Location Mogul Base HID and Compact Flourescent S A F Class I, Division 2, Groups A, B, C & D Class II, Division 1 & 2, Groups E, F & G Class III Zone 2, Groups IIA, IIB & IIC UL 844
SAF SERIES Hazardous Location Mogul Base HID and Compact Flourescent
SAF SERIES Hazardous Location Mogul Base HID and Compact Flourescent S A F Class I, Division 2, Groups A, B, C & D Class II, Division 1 & 2, Groups E, F & G Class III Zone 2, Groups IIA, IIB & IIC UL 844
SAFR LED S A F R L E D. LED Area Lighting for Hazardous Locations
LED Class I, Division 2, Groups A, B, C & D Class II, Division & 2, Groups E, F & G Class III Class I, Zone 2, Groups IIA, IIB & IIC UL 8750 LED Safety UL 844 Hazardous Locations UL 598 Wet Locations UL
Applications. Standard Materials. Certifications and Compliances
Code Master 2 HID Factory Sealed Luminaires Class I, Division 1 and 2, Groups C, D Class I, Division 1 and 2, Groups B, C, D Applications Ideal for use in chemical and petrochemical plants, such as manufacturers
N2LED Series Emergency Luminaires Non-Metallic Emergency Egress Lighting Systems with Remote or Direct Mounted Lamps.
Applications Enclosed and gasketed, non-metallic emergency lighting system suitable for use in areas where flammable gases or vapors may become present due to abnormal, unusual or accidental conditions
SAFJ LED SERIES S A L E D. Hazardous Location Compact LED
SAFJ LED SERIES Hazardous Location Compact LED Class I, Division 2, Groups A, B, C, & D Class II, Division 1 & 2, Groups E & F Class III Simultaneous Presence Enclosed & Gasketed Wet Locations NEMA 3R,
Applications. Standard Materials
Code Master Jr. HID Factory Sealed Luminaires Integrally Ballasted. 50 W, 70 W, 00 W, 50 W HPS; 50 W, 70 W, 00 W, 75 W PSMH. 75 W MH V. Medium Base. For Use with Threaded Metal Conduit. Class I, Division
Mercmaster LED Series Luminaires Enclosed and Gasketed Fixtures
Mercmaster Series Luminaires LIGHTING: ENCLOSED AND GASKETED AREA /INDUCTION Applications Enclosed and gasketed fixtures suitable for use in: Marine and wet locations A wide range of industrial, chemical
Mercmaster LED Series Luminaires Enclosed and Gasketed Fixtures
ATEX/IECEx: Zone 2 and 22 II 2 GD Lighting LIGHTING: ENCLOSED AND GASKETED AREA LED/INDUCTION Applications Enclosed and gasketed fixtures suitable for use in: Marine and wet locations A wide range of industrial,
N2MV Series W Non-metallic
N2MV Series 50-175W Non-metallic Cl. I, Div. 2, Groups A, B, C, D Cl. II, Groups F, G Cl. III & Simultaneous Presence (100W max) Marine & Wet Locations, R, 4, 4X; IP56 L Applications: N2MV series Champ
Code Master 2 Factory Sealed Induction Lighting System Explosionproof
Lighting Induction Code Master 2 Factory Sealed Induction Lighting System NEC/CEC: Class I, Division 1 and 2, Groups C, D Class II, Division 1 and 2, Groups E, F, G Marine Type Electric Fixtures Outside
4L EVM Hazard Gard H.I.D. Luminaires Mogul Base Factory Sealed (Groups C.D)
4L EVM Hazard Gard H.I.D. Luminaires Mogul Base Factory Sealed (Groups C.D) Cl. I, Div. 1 Groups B (GB suffix),c,d (with suffix GB), IIB IIA Paint Spray (100W max) Application: Hazard Gard luminaires are
Code Master 2 Factory Sealed Induction Lighting System Explosionproof
Code Master 2 Factory Sealed Induction Lighting System Class I, Division 1 and 2, Groups C, D Class II, Division 1 and 2, Groups E, F, G Marine Type Electric Fixtures Outside Type (Salt Water) NEMA 4X
1000 Watt Metal Halide Light - Class 1 Division 2 Groups A-D - T3b Temperature - 110,000 lumens
1000 Watt Metal Halide Light - Class 1 Division 2 Groups A-D - T3b Temperature - 110,000 lumens Part #: HALPRM-1000WMH Made in the USA The extremely durable Larson Electronics HALPRM-1000WMH metal halide
Areamaster 1000 Floodlights Integrally Ballasted W HID For hazardous locations.
A, IIB, IIC Applications Powerful, efficient weatherproof lighting for large areas such as: Pulp and paper mills Processing plants Chemical plants Oil refineries Foundries Storage areas Waste and sewage
Applications. Illustrated Features
Applications For use in locations where a high degree of corrosion resistance is required. FR Series: For use in areas where high humidity or water vapor are present Typical uses include meat- or food-processing
Applications. Straight Stanchion-Mount Fixture with Prismatic Glass Refractor and Guard. Pendant Mount Fixture with Prismatic Glass Refractor
Mercmaster III HID 50-250 Watt Luminaires Applications Enclosed and gasketed fixtures suitable for use in: Marine and wet locations A wide range of industrial, chemical processing and other areas where
Areamaster LED Flood/High Bay Luminaires
Applications Typical applications include: Pulp and paper mills Processing plants Chemical plants Oil refineries Foundries Storage areas Waste and sewage treatment Parking garages Other areas where dust,
Rig-A-Lite LED Luminaire Guide. Superior LED Technology for Hazardous and Severe Environments. Five-Year Warranty
Rig-A-Lite LED Luminaire Guide Superior LED Technology for Hazardous and Severe Environments Five-Year Warranty Rig-A-Lite LED Luminaires The Rig-A-Lite LED luminaires are the perfect combination of dependability,
MHD2/MHDO SERIES MHD2. Marine Heavy Duty Outdoor Non-Metallic Fluorescent CLASS 1 DIVISION 2 FLUORESCENT LIGHT
MHD2/MHDO SERIES Marine Heavy Duty Outdoor Non-Metallic Fluorescent Non-metallic, glass reinforced polyester housing. 3/4 in. NPT aluminum hub. Captive stainless steel latches. Stainless steel mounting
ALUMINUM OUTLET BODIES
KILLARK GEB SERIES ALUMINUM OUTLET BODIES * Class I, one I, Groups IIC, IIB, IIA Type 4X Applications GEB series conduit boxes are installed in conduit systems within hazardous areas to: Protect conductors
VR A 3W 4P Receptacle. Long Description. Manufacturer Information. Taxonomies, Classifications, and Categories
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 Catalog Number Manufacturer Description Weight per unit Product Category Descriptions Description Long Description Product
MHDS SERIES M H D S. Stainless Steel Marine Heavy Duty Luminaire for Hazardous Locations
MHDS SERIES Stainless Steel Marine Heavy Duty Luminaire for Hazardous Locations Class I, Division 2, Groups A, B, C & D Class II, Division 2, Groups F & G Class III UL 844 Hazardous Locations UL 198A Marine
MHD2/MHDO SERIES M H D 2. Marine Heavy Duty Non-Metallic Fluorescent
MHD2/MHDO SERIES Marine Heavy Duty Non-Metallic Fluorescent Class I, Division 2, Groups A, B, C & D Class II, Division 2, Groups F & G Class III Zone 2, Groups IIA, IIB & IIC UL 844 Hazardous Locations
DuraPro Hazardous Area Fluorescent
CSA - Class I Div. 2 - Groups A, B, C, & D CSA - Class I Zone 2 - Groups IIA, IIB & IIC CSA - Class II Div. 2 - Groups F & G CSA - Type 3 UL 844 - Class I Div. 2 - Groups A, B, C, & D UL - Outdoor Marine
Mercmaster II HID Luminaires High Pressure Sodium and Pulse Start Metal Halide. Mogul Base UNILETS for Use with Threaded Metal Conduit.
UNILETS for Use with Threaded Metal Conduit. Applications Enclosed and gasketed HID lighting fixtures for use in tunnels, walkways, bridges, storage facilities, processing plants, parking lots, foundries,
SXPJ SERIES S X azz.com/rigalite
SXPJ SERIES HID Lighting & Compact for Explosion Fluorescent Proof, Lighting Hazardous for and Hazardous Hostile Locations and Hostile Locations S X PJ Class I, Division 1, Group C & D Class II, Division
220/230/240V Watt High Pressure Sodium - Hazardous Location Lighting - C1D2 - Pole Mount
220/230/240V Watt High Pressure Sodium - Hazardous Location Lighting - C1D2 - Pole Mount Part #: HAL-PRM-250W-HPS-220V-PT Page: 1 Made in the USA The efficient HAL-PRM-250W-HPS-220V-PT high pressure sodium
Form 35 Malleable Iron Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum and IMC Conduit.
NEC/CEC Suitable for use in the following Applications Serve as pulling fittings. Make bends in conduit system. Provide openings for splicing. Connect and change direction of conduit runs. Allow connections
TERMINAL BOXES FOR HARSH & HAZARDOUS ENVIRONMENTS
OSUR CL HA ES EN KILLARK Z LO C SJIC SERIES TERMINAL BOXES FOR HARSH & HAZARDOUS ENVIRONMENTS Screw cover style, with or without continuous hinge 3/16 (5mm) wide flat flange for maximum gasket surface
CEC: Class I, Division 1 and 2, Groups B, C, D Class II, Division 1 and 2, Groups E, F, G Class III Type 4X Exd IIB + H 2
Integrally Ballasted. 50 W, 70 W, 00 W, 50 W HPS; 75 W PSMH. 75 W MH. Medium Base. For Use with Threaded Metal Conduit. Applications For use in chemical and petrochemical plants, such as manufacturers
Form 85 Unilets Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum, IMC, and EMT Conduit.
For use with Rigid Steel, Rigid Aluminum, IMC, and EMT Conduit. NEC/CEC Suitable for use in the following Applications Serve as pulling fittings. Make bends in conduit system. Provide openings for splicing.
HID/AREA: NEC/CEC EXPLOSIONPROOF. Applications. NEC/CEC Certifications and Compliances
Integrally Ballasted. 50 W, 70 W, 100 W, 150 W, 250 W, 400 W HPS; 175 W, 250 W, 320 W, 350 W, 400 W PSMH; 175 W, 250 W, 400 W MH. Applications Ideal for use in chemical and petrochemical plants, such as
AUTHENTIC LIFE SAFETY PRODUCTS SINCE 1940
AUTHENTIC LIFE SAFETY PRODUCTS SINCE 1940 NEMA 4X C1D2/C2D1 INDUSTRIAL HIGH LUMEN LED EMERGENCY LIGHT DUAL-LITE.COM INNOVATIVE LED NEMA 4X C1D2/C2D1 Industrial Emergency Light The Dynamo Series offers
Lighting: Explosionproof Area HID. Applications. Standard Materials
Code Master Jr. HID Factory Sealed Luminaires Integrally Ballasted. 50 W, 70 W, 00 W, 50 W HPS; 50 W, 70 W, 00 W, 75 W PSMH. 75 W MH V. Medium Base. For Use with Threaded Metal Conduit. Class I, Division
KEMLUXIII KH SERIES HAZARDOUS LOCATION
KEMLUXIII SERIES HAZARDOUS LOATION AT.# APPROVALS JOB TYPE SPEIFIATIONS Applications - Designed to efficiently light corrosive and harsh applications such as chemical, petrochemical, marine, power generation,
Applications. Standard Materials. Certifications and Compliances
Code Master 2 HID Factory Sealed Luminaires NEC: Class I, Division 1 and 2, Groups C, D Class II, Division 1 and 2, Groups E, F, G Marine Type Electric Fixtures Outside Type (Salt Water) Class I, Division
LED FLOOD LIGHT SOLUTIONS Harsh and Hazardous Products
LED FLOOD LIGHT SOLUTIONS Harsh and Hazardous Products www.hubbell-killark.com Ex- LED Lighting and Control Switches KILLARK LED FLOOD LIGHTS H A Z LO C INDEX PRODUCT PAGE NO. NEMA 4 (or 4X or IP66) Class
G1-1. HID Lighting Fixtures: Explosionproof, Dust-Ignitionproof. Page Description
HID Lighting Fixtures: Explosionproof, Dust-Ignitionproof 1-1 Code Master 2 with Polyester Reflector Code Master Jr. without Reflector Code Master 2 Floodlight A-51 roup A & B with Porcelain Reflector
FM9 Aluminum Unilet Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum and IMC.
FM9 Aluminum Unilet Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum and IMC. : Conduit Bodies Applications Serve as pulling fittings. Make bends in conduit system. Provide
LIGHTING: EXPLOSIONPROOF FLOODLIGHT. Applications. Options
Code Master 2 HID Factory Sealed Floodlights NEC: Class 1, Division 1 and 2, Groups C, D Marine Type Electric Fixtures Outside Type (Salt Water) CEC: V Class I, Division 1 and 2, Groups B, C, D Class II,
Spec 5 Conduit Bodies, Covers and Gaskets For Rigid Conduit and IMC
NEC/CEC Suitable for use in the following Applications To provide access to conductors for pulling, splicing, maintenance and future changes/ upgrades. Allows connection of straight conduit runs, branch
FM9 Aluminum Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum and IMC.
Applications Serve as pulling fittings. Make bends in conduit system. Provide openings for splicing. Connect and change direction of conduit runs. Allow connections for branch runs. Permit access to conductors
ExceLine 1611 Clovis R. Barker Road San Marcos, TX Fax: PT#: EXSP038A0712
Type No. Catalog No. Job. Name ILXGHB MasterColor Elite Series APPLICATIONS Applications include industrial facilities, manufacturing plants, retail applications, and gymnasiums. CONSTRUCTION The ILX MasterColor
EXBLI & EXBSPI Series. Circuit Breaker Panelboards for Harsh and Hazardous Environments
EXBLI & EXBSPI Series Circuit Breaker Panelboards for Harsh and Hazardous Environments KILLARK Z A H LO C NEMA 4X O Ring Gasket Stainless Steel Tri-Lead Cover New Slide MCB Assembly Handles Padlockable
Weather Protective Devices
Weather Protective Devices N Industrial Specification Grade Receptacle Covers N-1, N-2 Weather Protective Devices N-3 Power-Lock Receptacles and Flanged Inlets with Weather Protective Lift Lids N-4 50
HID/FLOODLIGHT: NEC/CEC EXPLOSIONPROOF. Applications. Options
Applications UL Listed for Outside Type (Salt Water). Ideal in Class I, Division 1 and 2 installations in refineries, in pipeline transportation facilities, at drilling rigs and in production facilities
SXPJ SERIES S X. HID & Compact Fluorescent Lighting for Hazardous and Hostile Locations
SXPJ SERIES HID & Compact Fluorescent Lighting for Hazardous and Hostile Locations S X PJ Class I, Division 1, Group C & D Class II, Division 1, Groups E, F & G Class III Zone 1, Groups IIA & IIB Factory
Fluorescent Lighting: Enclosed and Gasketed
luorescent Lighting: Enclosed and Gasketed 3-1 Page Description 2-5 V Series 2-3 eatures, Ordering Information and Accessories 4-5 Technical Data, Dimensions and Photometric Data 6-11 VRS and DRS luorescent
Twist Lock - Explosion Proof - Dust Ignition Proof Receptacle Assembly
Twist Lock - Explosion Proof - Dust Ignition Proof Receptacle Assembly Part #: EPO-25A The Larson Electronics EPO-25A explosion proof power outlet provides a durable and secure weatherproof power connection
Haz. HazMax Intrepid/nm TECHNICAL SPECIFICATIONS
Haz HazMax Intrepid/nm APPLICATIONS Hazardous locations Marine and watertight requirements Dusttight requirements Oil and gas exploration and production Petrochemical facilities APPROVALS Class I Division
FVH / LED Vapor Proof Highbay
The LED vapor proof highbay is a preferred upgrade to replacing HID fixtures and existing vapor proof fixtures in varying climate conditions. This weatherproof fixture is ideal for challenging environments
MAR SERIES Fluorescent Lighting for Hazardous Locations
MAR SERIES M AR Fluorescent Lighting for Hazardous Locations Class I, Division 2, Groups A, B, C, & D Seismic Tested UL 844 Hazardous Locations UL 924 Emergency Lighting UL 1598A Marine Outside Type CSA
FVT / LED Vapor Tight
The LED vapor tight fixtures are a preferred upgrade to replacing HID fixtures and existing vapor tight fixtures in varying climate conditions. This weatherproof fixture is suitable for use in parking
LB125A 1-1/4" LB Form 5 Aluminum Conduit Body. Dimensions and Weight STUD SIZE #10; 0.97 INCH LENGTH; INSULATION SUPPORT
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 LB125A 1-1/4" LB Form 5 Aluminum Conduit Body Appleton/Oz Gedney Catalog Number Manufacturer Description Weight per unit
FV Series Nonmetallic Fluorescent Luminaires For Hazardous and Adverse Locations
Applications For use in hazardous locations defined by the NEC and CEC as Class I, Division 2, Groups A, B, C and D; Class II, Division 2, Groups F and G; Marine Outdoor Salt Water; UL1598A and. As well
Plastic Ceiling Receptacle Lampholders
R C US Plastic Ceiling Receptacle Medium Base 250W 250V Plastic Ceiling Receptacle R-1 4.56" (115.8mm) 1.59" (40.4mm) S1174W 4.63" (117.6mm) 1.52" (38.6mm) Molded of high-temperature, thermoset plastic
FACTORY SEALED CONTROLS - INTRODUCTION
FACTORY SEALED - INTRODUCTION Contact Factory for other certification details D2CU Factory Sealed Contact Block Applications Seal-XM Factory Sealed push button stations, selector switches, pilot lights
Aluminum Conduit Bodies, Covers and Gaskets For Rigid Conduit & IMC.
NEC/CEC Suitable for use in the following Applications To provide access to conductors for pulling, splicing, maintenance and future changes/upgrades. Allows connection of straight conduit runs, branch
NMF 2 SERIES Non-Metallic Enclosed and Gasketed Fluorescent Lighting for Wet and Damp Locations
NMF 2 SERIES Non-Metallic Enclosed and Gasketed Fluorescent Lighting for Wet and s NEMA 4X UL 1598 Wet & s CUL IP65 NSF Enclosure N M F 2 339 NMF2 SERIES Non-Metallic Enclosed and Gasketed Fluorescent
DMV Series W For Combustible Dusts
L DMV Series 50-250W For Combustible Dusts Champ H.I.D. Luminaires Cl. I, Div. 2, Groups A, B, C, D Restricted Breathing Cl. I, Div. 2 & Zone 2 (Suffix S826) Certified for IEC Zone 2 (Suffix S826TB) Cl.
EY, EYD, & ENY Series
EY, EYD, & ENY Series SELING For Harsh & Hazardous Environments Z H LO C EY SERIES SELING ENY ENY with Nipple (For Vertical or Horizontal Conduit) EY EY with Nipple (For Vertical Conduit) ENY-2 (Fixture
003 3 foot foot RUN Nominal Length* * For actual lengths see
M125 Project: Type: Qty: Series Lamping Shielding Mounting Nominal Length Finish Voltage Options Series Lamping Shielding Mounting Nominal Length Finish Voltage Options M125 (M125/9 Direct) Multi-Mount
7S Series. Standard Finishes Gray hammer epoxy/polyester pow-der coat. Compliances UL Listed. NEC OSHA
-2 7S Continuous Swivel and 7P Portable Series Extension Cord Reelites Furnished with 18-3 (2 wire plus safety ground) yellow SJOOW-A cord. Available with or without handlamps. Applications A safe and
EDS / EFS Series Control Stations
EDS / EFS Series Fully Assembled EFS and EDS Factory Sealed Devices Cl. I, Div. & 2, Groups B*, C, D Cl. II, Div., Groups E, F, G NEMA, 7B*CD, 9EFG Applications: Factory sealed enclosures are installed
FM8 Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum and IMC Conduit.
NEC/CEC Suitable for use in the following Applications Serve as pulling fittings. Make bends in conduit system. Provide openings for splicing. Connect and change direction of conduit runs. Allow connections
MagnaPro Hazardous Area Drop Lens Fluorescent
CSA - Class I Div. 2 - Groups A, B, C, & D CSA - Class I Zone 2 - Groups IIA, IIB & IIC CSA - Class II Div. 2 - Groups F & G CSA - Type 3 UL 844 - Class I Div. 2 - Groups A, B, C, & D UL - Outdoor Marine
F1-1. HID Lighting: Enclosed and Gasketed. Description. 2, 3 Mercmaster III Family Tree Mercmaster III HID Low Profile Lighting Fixtures
HID Lighting: Enclosed and Gasketed 1-1 Page Description 2, 3 Mercmaster III amily Tree 2-22 Mercmaster III HID Low Profile Lighting ixtures 23-54 Mercmaster III HID 50-250W Lighting ixtures Mercmaster
Heating Cable. Description
203312 Single Entry Connection Box NEMA 4X Entry for 1 Cable 3/4 Conduit Hub Opening Multiple Entry Connection Box NEMA 4X Entry for up to 3 Cables Power or Tee Connection 3/4 Conduit Hub Opening End Seal
performance & comfort
Blend performance & comfort in a downlight. CL-DL-VB CALCULITE LED " Total height of Light engine + Reflector ¼" mm PHILIPS LIGHTOLIER, CALCULITE, PROFESSIONAL-GRADE DOWNLIGHTING, LED " ROUND APERTURE
Areamaster 100 Wide-Beam Floodlights 70 W, 100 W, 150 W HPS; 70 W, 100 W, 150 PSMH For general, marine and hazardous locations.
Areamaster 100 Wide-Beam Floodlights NEC CEC V Class II, Divisions I and 2, Groups E, F, G V Class III Applications Highly efficient, all-weather flood-lighting for lower wattage service. Well suited for:
AKRON ELECTRIC, INC. CONDUIT PRODUCTS GR SERIES... EYS SERIES... TU SERIES... XBD-50 SERIES...
CONDUIT PRODUCTS F GR SERIES... EYS SERIES... TU SERIES... XBD-50 SERIES... 1025 Eagon St. Barberton, Ohio 44203 Ph:(330) 745-8891 Fax:(330) 745-2504 Toll Free:(800)-275-2535 06/09/03 NEW PRODUCT IN STOCK
FACTORY SEALED CONTROLS - INTRODUCTION
FACTORY SEALED - INTRODUCTION Contact Factory for other certification details D2CU Factory Sealed Contact Block Applications Seal-XM Factory Sealed push button stations, selector switches, pilot lights
Explosion Proof & Hazardous Area Junction Boxes
CSA - Class I Div. 1 - Groups C & D * CSA - Class I Zone 1 - Groups IIA, IIB * * Applies to GUI boxes only Explosion Proof & Hazardous Area Junction Boxes Features: Heavy-duty copper free (below 0.04%)
ELECTROGALVANIZED ALUMINUM ACRYLIC PAINTED FERALOY IRON ALLOY
EDSC210 -Way Switch Cooper Crouse-Hinds Catalog Number Manufacturer Description Weight per unit Product Category Features Box Type Contact Configuration Current Rating Voltage Rating Material, Color, and
Portable Lighting.
A Portable Lighting www.woodhead.com Handlamps Haztex Hazardous Location Fluorescent 26W Lights are designed to stringent specifications of NEC Article 500 and are agency listed for safety in classified
Explosion Proof Dock Light - Class I, Div. I, Groups C & D - 70 Watt LED Lamp - Extension Arm
Explosion Proof Dock Light - Class I, Div. I, Groups C & D - 70 Watt LED Lamp - Extension Arm Part #: EPL-DL-70LED-24 Page: 1 Made in the USA The EPL-DL-70LED-24 Explosion Proof Dock Light is U.L. approved
ELECTROGALVANIZED ALUMINUM ACRYLIC PAINTED FERALOY IRON ALLOY
EDS2274 Pos D.E. Selector Switch Cooper Crouse-Hinds Catalog Number Manufacturer Description Weight per unit Product Category Features Box Type SINGLE GANG Contact Configuration 4NO-4NC Number of Circuits
Champ MLL LED luminaires
The Champ MLL linear LED is specifically designed to replace fluorescent T12, T8 and T5HO lighting in harsh and hazardous applications. The rugged and durable design features the industry s most versatile
WFHN LED SERIES W F H N L E D. High-Bay Lighting for Heavy Hose-Down Environments
WFHN LED SERIES High-Bay Lighting for Heavy Hose-Down Environments UL 1589 Wet Locations UL 8750 LED Safety NEMA 4X CUL Listed NSF Certified Food Equipment High Pressure Hose-Down One Piece Welded Aluminum
Metal Shell Lampholders. FEATURES Molded of heat and impact-resistant urea.
Metal Shell Lampholders Socket Interiors Electrolier Medium Base Lampholders R-3 (27.7mm) 962 1.40" (35.6mm) 940 1.40" (35.6mm) 975 1.87" (47.5mm) 2.35" (59.7mm) 2.0" (50.8mm) Interiors for Medium Base
Heating Cable. Description
203312 Single Entry Connection Box NEMA 4X Entry for 1 Cable 3/4 Conduit Hub Opening Multiple Entry Connection Box NEMA 4X Entry for up to 3 Cables Power or Tee Connection 3/4 Conduit Hub Opening End Seal
Covers for Cast Iron or Aluminum Device Boxes
Single Gang Blank cover for enclosing splices and taps where device not used. Sheet DS100 Flush Sheet steel DSS100 For GFI receptacles. Sheet steel DS23 GFI For square handle general use snap or toggle
Heating Cable. Description
Single Entry Power Connection Kit NEMA 4X Entry for 1 Cable 3/4 Conduit Hub Opening Lighted or Non-Lighted Multiple Entry Connection Box NEMA 4X Entry for up to 3 Cables Power, Splice or Tee Connection
T38 1" T Form 7 Malleable Iron Conduit Body. Material, Color, and Finish Color Gray 0 Zinc Electroplate/Chromate/Epoxy Powder Coat
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 T38 1" T Form 7 Malleable Iron Conduit Body Appleton/Oz Gedney Catalog Number Manufacturer Description Weight per unit
I With Reflector 104-R 118-R. With Switch with Receptacle
Industrial Duty Handlamps Lamp Guards for 7 and 9 Series Handlamps Closed End Wire Guards No Reflector 104 118 104-I With Reflector 104-R 118-R 118-I Open End Wire Guards No Reflector 107 107-I 119 With
WFH LED SERIES L E D. High-Bay Lighting for Hazardous & Wet Locations
WFH LED SERIES W FH High-Bay Lighting for Hazardous & Wet Locations Class I, Division 2, Groups A, B, C, & D Class II, Division 2, Groups F & G Class III UL 844 Hazardous Locations UL 1598 Wet Locations
Receptacle housing and cover optional malleable iron on EFS-M Series. Spring-loaded cover seats against neoprene gasket.
U-Line Factory Sealed 20 Amp Plugs and Receptacles Dead-Front Safety Construction. Choice of Aluminum or Thermoplastic Polyester Plug. Class I, Division 1 and 2 Groups B, C, D NEMA 3, 3R, 7BCD, 9FG Applications
Explosion Proof Drop Light - 12 Volt AC/DC Watt Incandescent - 25' Cord - Twist Lock Plug
Explosion Proof Drop Light - 12 Volt AC/DC - 100 Watt Incandescent - 25' Cord - Twist Lock Plug Part #: EPL-DL-12-25 Made in the USA The Larson Electronics EPL-DL-12-25 Explosion Proof Hand Lamp is U.L.
HOOD ACCESSORIES HOOD ACCESSORIES HOOD ACCESSORIES
HOOD ACCESSORIES 58 59 VAPORPROOF RECESSED INCANDESCENT LIGHT FIXTURE VAPORPROOF LIGHT FIXTURES RECESSED INCANDESCENT LIGHT FIXTURE Specifications Cut-Out Mounting Diagram Socket: Side mounted porcelain