performance & comfort

Transcription

1 Blend performance & comfort in a downlight. CL-DL-VB CALCULITE LED " Total height of Light engine + Reflector ¼" mm PHILIPS LIGHTOLIER, CALCULITE, PROFESSIONAL-GRADE DOWNLIGHTING, LED " ROUND APERTURE DOWNLIGHT, NARROW MEDIUM & WIDE ///LM, CL-DL-VB Calculite LED " features an LED array of high brightness white light LEDs. The new LED boards in Calculite LED ensure a less than -step SDCM color variation between luminaires. Complete product = Frame-in kit + Trim kit Lumen package for the frame-in kit must match the trim kit. Project: Location: Catalog No: Fixture Type: Mfg: Lamps: Qty: Notes: Frame-in kit example: CLNUVBZV Series Lumens Installation Input voltage Version Dimming Options CL Calculite " LED round aperture CL Calculite " LED round aperture (v configurations) CUL Calculite LED Universal aperture lm N New construction R Remodeler lm lm lm lm lm U Universal (/ V) lm N New construction R Remodeler V V lm N New construction R Remodeler lm J J-box mount retrofit U Universal (/ V) lm J J-box mount retrofit V V VB ZV - V dimming LD Lutron driver ZV - V dimming LD Lutron driver EM Emergency LC Chicago Plenum EM Emergency LC Chicago Plenum V ZV - V dimming - V V ZV - V dimming Existing wiring will determine if dimming is an option. ZV - V dimming Existing wiring will determine if dimming is an option. lm lm S Screw-in base retrofit V Existing wiring will determine if dimming is an option. Trim kit example: CLDLKWCCDPVB CAFMR Series Lumens Style CCT Reflector Flangeless trim with plaster ring accessory. Flange Version (Recommended for gypsum installations) CL DL VB CL Calculite " LED round aperture,, & lm lm DL Downlight K K K K K K K K N Narrow,. s.c M Medium,. s.c. W Wide,. s.c. CL Clear CCL Comfort clear CCD Comfort clear diffuse CCZ Champagne bronze WH White (painted) W White CAFMR (painted) P Flangeless Polished trim with plaster ring accessory. (Recommended for gypsum installations) (matches aperture) FT Flangeless (flush-mount),. Available for new construction (N) installation frame-in kits only.. Available for () lumen frame-in kits only.. Accessory CAFMR required for gypsum applications (minimal ¼" reflector flange).. Consult LED-EM spec sheet for EM option details and restrictions.. Chicago Plenum (LC) is not available for () lumen frame-in kits.. Consult factory for availability of other V (-) fixture configurations.. Available for () lumen trim kits only. NOTE: See page for Energy Star compatibility. CAFMR Flangeless trim with plaster ring accessory. (Recommended for gypsum installations) CAFMR & CAFMR Flangeless trim with plaster ring accessory. (Recommended for gypsum installations) CL-DL-VB / page of CAXFMR

2 CL-DL-VB CALCULITE LED " New Construction New Construction ⅝" Remodeler Remodeler ½" ½" mm mm Side view Side view ⅝" mm mm Side view Side view ¼" dia. ¼" dia. mm mm " dia. " dia. Second driver on High Ceiling Trim Kits only mm mm Ceiling cutout Ceiling cutout " max.ceiling " max.thickness Maximum mm mm "Ceiling max with Wide thickness Ceiling thickness ½" max with Narrow and Medium ¼" dia. ¼" dia. mm mm ¾" dia. ¾" dia. mm mm ¾" dia. ¾" dia. mm mm Top viewtop view Top viewtop view ⅞" ⅞" ½" ½" mm mm mm mm ⅛" ⅛" mm mm ⅝" Total height Total height of of Light engine Light engine + + ReflectorReflector ⅝" mm mm ⅛" ⅛" mm mm Frame-in kits New construction Mounting frame: Galvanized stamped steel for dry or plaster ceilings. Vertical adjustment: Light engine adjusts in frame below ceilings up to ⅛". Mounting brackets: Galvanized Steel. Adjustable through aperture. Use ¾" or ½" lathing channel, ½" EMT or optional mounting bars. Remodeler Compatibility: Wide beam flanged downlight only. Power pack: Swivel junction box for tight plenum spaces. Snap-off covers permits wiring from top. Spring holder: Galvanized steel. Accepts up to ½" (mm) ceiling thickness. Quick-ship Retrofit Philips is committed to providing customers with the products they need when they need them. ¼" " CL-DL-VB / page of ¾" mm mm ¾" mm Service Smart Spec Smart Two-day quick-ship Two-week quick-ship Frame-in kits None available Frame-in kits CLNUVBZV CLNVBZV Trim kits None available Trim kits CLDLKMCCLWVB CLDLKWCCLWVB CLDLKMCCLWVB CLDLKWCCLWVB Junction box mount " ¾" mm Quick-ship SKUs apply to the United States only. mm ¾" Retrofit Compatibility: Wide beam downlight only. Capability: Converts " (mm) or " (mm) Lightolier incandescent frame-in kit without additional wiring using existing Calculite E base. Socket cup support: Spun steel. Holds Calculite incandescent socket cup. Socket extender: Phenolic E base. Connect to existing lampholder. ¼" mm mm mm Screw-in base

3 CL-DL-VB CALCULITE LED " Calculite LED " CLDLKWCCDPVB Calculite LED " Trim kits are backwards compatible with all Calculite LED " Frame-in Kits. Trim kits. Heatsink cast aluminum. Thermal pad. LED board. Reflective insert. Reflector." anodized or painted aluminum. Mixing chamber injection molded polycarbonate. Diffusion film. Glass." clear borosilicate. Retaining ring." anodized aluminum Features Ceiling cutout: " aperture; " (mm). Depth: ¼" ( mm) including light engine. Power connection: Attaches to light engine via push-in connector (on frame). Removable cover provides access. Junction box: UL listed for No. AWG, C through branch circuit connectors. Allows inspection from below. Thermal protector: Meets NEC & UL requirements. Do not install insulation above or within " of luminaire. Thermal Management: Heat sink and thermal design along with the clean room assembly process ensures specified performance levels are maintained. Options and accessories Dimming capability: -V or Lutron dimming. See LED-DIM specification sheet. Emergency capability: Integral; Add EM suffix. See LED-EM spec sheet. Sloped ceilings: Compatible with slope ceiling adaptors. See specification sheet SCA. Round apertures require SCAHID accessory. Mounting bars: -" (set of ) -" (set of ) T-Bar anchor clips: (set of ), for use with above. ENERGY STAR All new construction (N) frame-in and trim kit configurations are certified except for the following: - Trim Kits: Champagne bronze reflector finishes; CLDL--KMCCZ..., CLDL--KWCCZ..., - All lumen () optics configurations. - All lumen () optics configurations. - All emergency (EM) configurations. - All V configurations. Electrical Electronic power supply: or V, /Hz, encased, overload and short circuit protected, thermal regulation to protect against overheating, sound rating. A, - C minimum starting temperature, C maximum ambient environment. Rated life:, hrs at % lumen maintenance based on IES LM-- and TM-- for lm and lm., hours at % lumen maintenance (L) for lm. Frame-In kit Electrical specifications CL VBZV lm w/-v dimming CL VBZV lm w/-v dimming CL VBZV lm w/-v dimming * +/- % Input volts Input freq. Input current LED drive current Labels culus, I.B.E.W. Suitable for wet locations. year warranty. ENERGY STAR certified (see exclusions to the left). Input power* LED power THD factor Power factor V /Hz.A ma W W <% >. V /Hz.A ma W W <% >. V /Hz.A ma W W <% >. V /Hz.A ma W W <% >. V /Hz.A ma W W <% >. V /Hz.A ma W W <% >. CL-DL-VB / page of

4 CL-DL-VB CALCULITE LED " Calculite LED " High Ceiling CLDLKWCCDPVB Trim kits. Heatsink cast aluminum. Thermal pad polycarbonate. Reflective insert prefinished aluminum. Connector. LED board. Reflector." anodized or painted aluminum. Mixing chamber injection molded. Glass lens." clear borosilicate. Diffuse film. Retaining ring." anodized aluminum Features Ceiling cutout: " aperture; " (mm). Depth: ¼" ( mm) including light engine. Power connection: Attaches to light engine via push-in connector (on frame). Removable cover provides access. Junction box: UL listed for No. AWG, C through branch circuit connectors. Allows inspection from below. Thermal protector: Meets NEC & UL requirements. Do not install insulation above or within " of luminaire. Thermal Management: Heat sink and thermal design along with the clean room assembly process ensures specified performance levels are maintained. Options and accessories Dimming capability: -V or Lutron dimming. See LED-DIM specification sheet. Emergency capability: Inverter; See LED-LMI specification sheet. Integral; Add EM suffix. See LED-EM spec sheet. Sloped ceilings: Compatible with slope ceiling adaptors. See specification sheet SCA. Round apertures require SCAHID accessory. Mounting bars: -" (set of ) -" (set of ) T-Bar anchor clips: (set of ), for use with above. Electrical Electronic power supply: or V, /Hz, encased, overload and short circuit protected, thermal regulation to protect against overheating, sound rating. A, - C minimum starting temperature, C maximum ambient environment. Rated life:, hrs at % lumen maintenance based on IES LM-- and TM--. Labels culus, I.B.E.W. Suitable for wet locations. year warranty. CL-DL-VB / page of

5 CL-DL-VB CALCULITE LED " W LED, K, Medium lumen %.%.%.% '.'...'.' CL = % CCL = % CCD = % CCZ = % WH = % K = % K = % K = % K = % Frame: CLNUVBZV Trim: CLDLKMCLWVB CCT : Input watts : Report no : K lms. W. lm/w min. GFR * diameter is where drop to % of maximum. Multiple unit data - RCR '..... xx' Room, Workplane ½' above floor, //% Reflectances..... Ceiling % % % % % Wall RCR Zonal cavity method - Effective floor reflectance = % W LED, K, Wide lumen %.%.%.% '.'.... CL = % CCL = % CCD = % CCZ = % WH = % K = % K = % K = % K = % Frame: CLNUVBZV Trim: CLDLKWCLWVB CCT : Input watts : Report no : K lms. W. lm/w min. GFR * diameter is where drop to % of maximum. Multiple unit data - RCR '..... xx' Room, Workplane ½' above floor, //% Reflectances..... Ceiling % % % % % Wall RCR Zonal cavity method - Effective floor reflectance = %. Correlated Color Temperature within specs as defined in ANSI_NEMA_ANSLG C.-: Specifications for the Chromaticity of Solid State Lighting Products.. Wattage controlled to within %.. Tested using absolute photometry as specified in LM: IESNA Approved Method for the Electrical and Photometric Measurements of Solid-State Lighting Products. CL-DL-VB / page of

6 CL-DL-VB CALCULITE LED " W LED, K, Medium lumen %.%.%.% '.'...'.' CL = % CCL = % CCD = % CCZ = % WH = % K = % K = % K = % K = % Frame: CLNVBZV Trim: CLDLKMCLWVB CCT : Input watts : Report no : K lms. W. lm/w min. GFR * diameter is where drop to % of maximum. Multiple unit data - RCR '..... xx' Room, Workplane ½' above floor, //% Reflectances..... Ceiling % % % % % Wall RCR Zonal cavity method - Effective floor reflectance = % W LED, K, Wide lumen %.%.%.% '.'.... CL = % CCL = % CCD = % CCZ = % WH = % K = % K = % K = % K = % Frame: CLNVBZV Trim: CLDLKWCLWVB CCT : Input watts : Report no : K lms. W. lm/w min. GFR * diameter is where drop to % of maximum. Multiple unit data - RCR '..... xx' Room, Workplane ½' above floor, //% Reflectances..... Ceiling % % % % % Wall RCR Zonal cavity method - Effective floor reflectance = %. Correlated Color Temperature within specs as defined in ANSI_NEMA_ANSLG C.-: Specifications for the Chromaticity of Solid State Lighting Products.. Wattage controlled to within %.. Tested using absolute photometry as specified in LM: IESNA Approved Method for the Electrical and Photometric Measurements of Solid-State Lighting Products. CL-DL-VB / page of

7 CL-DL-VB CALCULITE LED " W LED, K, Medium lumen %.%.%.% '.'...'.' CL = % CCL = % CCD = % CCZ = % WH = % K = % K = % K = % K = % Frame: CLNVBZV Trim: CLDLKMCLWVB CCT : Input watts : Report no : K lms. W. lm/w min. GFR * diameter is where drop to % of maximum. Multiple unit data - RCR '..... xx' Room, Workplane ½' above floor, //% Reflectances..... Ceiling % % % % % Wall RCR Zonal cavity method - Effective floor reflectance = % W LED, K, Wide lumen %.%.%.% '.'.... CL = % CCL = % CCD = % CCZ = % WH = % K = % K = % K = % K = % Frame: CLNVBZV Trim: CLDLKWCLWVB CCT : Input watts : Report no : K lms. W. lm/w min. GFR * diameter is where drop to % of maximum. Multiple unit data - RCR '..... xx' Room, Workplane ½' above floor, //% Reflectances..... Ceiling % % % % % Wall RCR Zonal cavity method - Effective floor reflectance = %. Correlated Color Temperature within specs as defined in ANSI_NEMA_ANSLG C.-: Specifications for the Chromaticity of Solid State Lighting Products.. Wattage controlled to within %.. Tested using absolute photometry as specified in LM: IESNA Approved Method for the Electrical and Photometric Measurements of Solid-State Lighting Products. CL-DL-VB / page of

8 CL-DL-VB CALCULITE LED " W LED, K, Narrow lumen %.%.%.% '.'..'.'. CL = % CCL = % CCD = % CCZ = % WH = % K = % K = % K = % K = % Frame: CLNVBZV Trim: CLDLKNCLWVB CCT : Input watts : Report no : K lms. W. lm/w min. GFR * diameter is where drop to % of maximum. Multiple unit data - RCR ' xx' Room, Workplane ½' above floor, //% Reflectances..... Ceiling % % % % % Wall RCR Zonal cavity method - Effective floor reflectance = % W LED, K, Medium lumen %.%.%.% '.'...'.' CL = % CCL = % CCD = % CCZ = % WH = % K = % K = % K = % K = % Frame: CLNVBZV Trim: CLDLKMCLWVB CCT : Input watts : Report no : K lms. W. lm/w min. GFR * diameter is where drop to % of maximum. Multiple unit data - RCR ' xx' Room, Workplane ½' above floor, //% Reflectances..... Ceiling % % % % % Wall RCR Zonal cavity method - Effective floor reflectance = %. Correlated Color Temperature within specs as defined in ANSI_NEMA_ANSLG C.-: Specifications for the Chromaticity of Solid State Lighting Products.. Wattage controlled to within %.. Tested using absolute photometry as specified in LM: IESNA Approved Method for the Electrical and Photometric Measurements of Solid-State Lighting Products. CL-DL-VB / page of

9 CL-DL-VB CALCULITE LED " W LED, K, Wide lumen %.%.%.% '.'.... CL = % CCL = % CCD = % CCZ = % WH = % K = % K = % K = % K = % Frame: CLNVBZV Trim: CLDLKWCLWVB CCT : Input watts : Report no : K lms. W. lm/w min. GFR * diameter is where drop to % of maximum. Multiple unit data - RCR ' xx' Room, Workplane ½' above floor, //% Reflectances..... Ceiling % % % % % Wall RCR Zonal cavity method - Effective floor reflectance = %. Correlated Color Temperature within specs as defined in ANSI_NEMA_ANSLG C.-: Specifications for the Chromaticity of Solid State Lighting Products.. Wattage controlled to within %.. Tested using absolute photometry as specified in LM: IESNA Approved Method for the Electrical and Photometric Measurements of Solid-State Lighting Products. Koninklijke Philips N.V. All rights reserved. Specifications are subject to change without notice. CL-DL-VB / page of Philips Lighting North America Corporation Franklin Square Drive Somerset, NJ Phone: -- Philips Lighting Company Hillmount Road Markham ON, Canada LC S Phone: --