Model Sno-Tek 20 (Serial No and up)

Transcription

1 Parts Manual Model 0 Sno-Tek 20 (Serial No and up) Gasoline containing up to 0% ethanol (E0) or up to 0% MTBE (methyl tertiary butyl ether) is acceptable for use in this machine. The use of any gasoline exceeding 0% ethanol (E0) or 0% MTBE will void the product warranty. Il est possible d utiliser de l essence contenant jusqu à 0% d éthanol (E0) ou 0% de MTBE (éther méthyl-tertiobutylique) sur cette machine. L utilisation d une essence contenant plus de 0% d éthanol (E0) ou de 0% de MTBE annulent la garantie. En esta máquina puede utilizarse gasolina con hasta un 0% de etanol (E0) o hasta un 0% de MTBE (éter de metil butil terciario). El uso de cualquier otro tipo de gasolina con un porcentaje superior al 0% de etanol (E0) o al 0% de MTBE invalidará la garantía del producto. 000A 0/ Printed in USA

2 THE MANUAL Before you operate your unit, carefully and completely read manuals supplied with the unit. The contents will provide you with an understanding of safety instructions and controls during normal operation and maintenance. For your safety and the safety of others always read, understand, and follow all DANGER, WARNING, and CAUTION messages found in manuals and on safety decals. Hardware descriptions are given in decimals. Decimals to Fractions.0 /.5 /.25 /8.25 5/8.88 /.88 /.250 /.750 /. 5/.8 /.75 / /8.8 7/.8 5/.500 /2.00 SERVICE AND REPLACEMENT PARTS When ordering replacement parts or making service inquiries, know the model and serial numbers of your unit and engine. Numbers are located on the product registration card in the unit literature package. They are printed on a serial number label, located on the frame of your unit. Record unit model and derial numbers here: PRODUCT REGISTRATION The Ariens dealer must register the product at the time of purchase. Registering the product will help the company process warranty claims or contact you with the latest service information. All claims meeting requirements during the limited warranty period will be honored, whether or not the product registration card is returned. Keep a proof of purchase if you do not register your unit. Customer Note: If dealer does not register your product, please fill out, sign and return the product registration card to Ariens or go to YOUR SATISFACTION IS IMPORTANT Questions? Please follow these helpful steps:. Refer to the manuals supplied with your unit. They will guide you through safe and proper operation and maintenance. They contain specifications on your unit. If your questions are not answered in these manuals, go to step number two. 2. Contact your dealer. Our dealers will be happy to supply any service or advice required to keep your unit operating at peak efficiency. A factory trained staff is available to support your equipment needs. They stock genuine Ariens parts and lubricants manufactured with the same precision and skill as the original. If your questions are not resolved by the support staff, ask for the manager or owner. When contacting your dealer supply your model and serial numbers. Record engine model and serial numbers here: TO SPEED PARTS ORDERING:. Know the model and serial numbers of your unit. 2. Know the part number required.. Know the quantity required.. Know the part description. UNAUTHORIZED REPLACEMENT PARTS Use only Ariens replacement parts. The replacement of any part on this vehicle with anything other than an Ariens authorized replacement part may adversely affect the performance, durability, or safety of this unit and may void the warranty. Ariens disclaims liability for any claims or damages, whether warranty, property damage, personal injury or death arising out of the use of unauthorized replacement parts. 2

3 MODEL TABLE OF CONTENTS Model 0 Sno-Tek 20 20" Sno-Tek, Electric Start Serial No and up DECALS Decals Sno-Tek ENGINE AND DRIVE Engine and Belt Drive FRAME AND HOUSING Handlebars and Controls Auger and Impeller Discharge Chute Gear Case

4 DECA LS SN O -TEK 20 Model A Item Part No Qty. Description Decal, Danger Decal, Danger, Rotating Parts Decal, Dash Decal, Control Decal, Housing, 20

5 NOTES 5

6 ENGINE AND BELT DRIVE Model

7 ENGINE AND BELT DRIVE Model 0 Item Part No. Qty. Description 005 Frame Washer, Flat Steel.0 x.82 x Transmission 0800 Pulley Bolt, Hex.8- x Nut, Locking Top Flange Screw, Tapping Hex Washer Head Thread Rolling.8- x Cover, Bottom Screw, Tapping Hex Washer Head Thread Rolling x Bolt, Shoulder Bracket, Cable Pulley Bolt, Shoulder Nut, Locking Top Flange Pulley, Cable Bracket, Brake Mount Bolt, Hex.8- x Bushing, Sleeve Bushing, Polyliner Bushing, Sleeve Idler Arm Bushing, Sleeve Ring, Retaining External.250 x Spring Arm, Brake with Pad (Includes Items 25 and 2) Pad, Brake (Included in Item 2) Rivet, Pop.87 (Included in Item 2) Arm, Clutch Bolt, Round Head Square Short Neck.-8 x Spacer Idler 0500 Nut, Locking Top Flange Spring Bushing, Sleeve 000 Washer, Flat Steel.52 x.827 x Washer, Wave Nut, Spin Locking Flange Cover, Belt Screw, Tapping Large Hex Washer Head Thread Rolling x Bushing, Axle Shaft, Axle Gear Washer, Flat Steel.75 x.000 x Tire/Wheel, Tire, AR Tube, Bolt, Hex x.75 Grade Nut, Locking Center Cable Engine, LCT Stormforce 208, 20V Sheave, Drive Sheave, Engine V-Belt V-Belt Finger, Belt Washer, Flat Steel. x.88 x Washer, Locking.2 x Bolt, Hex.-2 x Finger, Belt Bolt, Hex x 2.5 Grade Plug, Hole Washer, Locking.8 x Bolt, Hex.8-2 x Pin, Roll 5mm x 2mm Spark Plug Fuel Cap Key, Push/Pull LCT 7

8 8 HANDLEBARS AND CONTROLS Model

9 HANDLEBARS AND CONTROLS Item Part No. Qty. Description 085 Handlebar, Upper Right Handlebar, Upper Left Handle Grip Control Panel with Decal Bolt, Round Head Extra Long Square Neck x Nut, Locking Top Flange Bolt, Round Head Extra Long Square Neck.-8 x Nut, Locking Center Bracket, Interlock Bolt, Round Head Extra Long Square Neck x Clutch Paddle Block Bolt, Round Head Extra Long Square Neck x Bushing, Polyliner 0055 Clutch Handle, Right Clutch Handle, Left Edging, Clutch Handle Rod, Paddle Mount, Long Screw, Tapping Hex Washer Head Thread Rolling x Rod, Paddle Mount, Short Cam, Interlock Pin, Spring Clip Interlock Arm Rod, Pivot Spring Crank Bushing Cable, Auger Cable, Traction Bolt, Round Head Square Neck.-8 x Spacer Washer, Flat Steel.8 x.875 x Washer, Locking.2 x Nut, Locking Nylon Handlebar, Lower Bolt, Serrated Flange Hex Washer Head.8- x Spring Washer, Flat Steel.28 x.2 x Pin, Hair Internal.0 x.8 x.77 Model 0

10 AUGER AND IMPELLER Model

11 AUGER AND IMPELLER Model 0 Item Part No. Qty. Description Housing, Blower 20" Hub Pulley Screw, Tapping Hex Washer Head Thread Rolling.-8 x Washer, Locking.2 x Bolt, Hex.-2 x Skid Shoe Bolt, Round Head Square Short Neck.8- x Washer, Flat Steel.8 x.875 x Nut, Locking Center Blade, Scraper, 20" Bolt, Round Short Head Square Short Neck.-8 x Nut, Locking Top Flange Bearing Bearing Flange Bearing Flange Nut, Locking Center Rake, Right Hand with Zerk 20" Rake, Left Hand with Zerk 20" Shear Bolt with Nut (Includes Item 7) Washer, Flat Steel.82 x.50 x Zerk, Fitting.25 x.25 Drive-In Bushing Screw, Tapping Hex Washer Head Thread Rolling x Impeller Mount, Snow Clean Out Rivet, Pop Device, Snow Clean Out Pin, Roll.25 x Nut, Threaded Insert.8-

12 DISCHARGE CHUTE Model

13 DISCHARGE CHUTE Model 0 Item Part No. Qty. Description Pedestal, Chute Washer, Locking.8 x Bolt, Hex.8- x Friction Washer Washer, Flat Steel.0 x.25 x Chute, Discharge with Cap and Decal Chute Gear Bolt, Round Head Square Neck.8- x Plate, Friction Spring Nut, Locking Top Flange Bolt, Round Head Square Short Neck.-8 x Bracket, Pinion Gear Screw, Tapping Hex Washer Head Thread Rolling x Bushing, Polyliner Washer, Thrust.25 x.0 x Pinion Gear Assembly (Includes Items, 5, and 8) Pushnut Pin, Spring Clip Gear Cover Washer, Flat Steel. x.88 x Wing Knob Washer, Flat Nylon.75 x.75 x Rod, Chute Crank Knob, Chute Crank

14 GEAR CASE Model

15 GEAR CASE Model 0 Item Part No. Qty. Description Cover, Top Gasket 0000 Gear Case Screw, Tapping Hex Washer Head Thread Rolling x Washer, Bonded Seal Screw, Tapping Hex Washer Head Rolok.8- x Bushing, Flange Seal, Oil Bushing, Flange Washer, Flat Steel.70 x.225 x Worm Shaft and Worm Gear Set Thrust Collar Pin, Straight.88 x Bushing, Flange Cover, Front Bushing, Flange Seal, Oil Bushing Retainer Ring, Retaining Internal.500 x Key, Woodruff. x. Hardened # Shaft, Rake Gear Case Assembly (Includes Items 2) Gear Lube, 8 oz. Bottle 5

16

17 Ariens 55 West Ryan Street Brillion, WI Fax