SPECIFICATION GUIDE-IMserv

Size: px

Start display at page:

Download "SPECIFICATION GUIDE-IMserv"

Colleen Harper
5 years ago
Views:

1 SPECIFICATION GUIDE-IMserv Issue 3, June 06

Contents Technical specifications 3, 4 IMserv II Primary rack builds 5, 7 Open frames 8 Doors 9 Door lock options 10 Front cover trims 10 Side panels 11 Divider panels 12 Top covers 13 Heavy duty

2 Contents Technical specifications 3, 4 IMserv II Primary rack builds 5, 7 Open frames 8 Doors 9 Door lock options 10 Front cover trims 10 Side panels 11 Divider panels 12 Top covers 13 Heavy duty castors, adjustable feet & boltin down clamps 14 Baying kits mm spacer system 16 Raft' floor tile replacement plinth 17 Cable & power management for the rear of 1,000 deep cabinets 18 Top cable management 19 Cable management 20, 21, 22 19" 'server' panel mounts 23 Panel mount supports 24 ETSI mounts 25 Cross members 25 Unit identification strip 26 Accessory fixings 26 19" front panels 26 Cantilever shelves 27 Chassis supports 28 Chassis trays 29 Heavy duty shelves 30 Sliding shelves 31 Keyboard shelves 32 Heavy duty sliding shelves and Extension Plinth mm plinths 34 Fan trays - top mounted 35 Hi-flow top cover with fans 36 Earthing 'Squid' kit 37 Earthing bars 37 Busbar system 38 Document holder 38 Magnetic lights 38 Power management 39

3 IMserv II Technical specifications IMserv is a multi-practice 19 and / or ETSI enclosure designed to house and protect computer servers and any other mission critical active equipment. IMserv s physical strength, thermal and security management solutions, combined with its depth options makes it an ideal enclosure for even the largest servers. End Frame mm deep End Frame - 800mm deep Features Supplied fully assembled and configured with accessories Very strong load rated to 900kg Accommodates all major servers on the market Future proofed can accommodate both 19 and ETSI equipment. Unique door vent pattern to provide excellent thermal management - 60% open area Graded security to highest levels Application specific accessories 3 height options 25U (45SU), 42U (75SU), & 47U (85SU) 2 depth options 800mm and 1000mm 2 width options 600mm and 800mm Additional 100mm cabling spacers available between cabinets Standards IEC DIN 41494, part 7 DIN 41491, part 1 (mounting dimensions) EN VDE 0100 Colour IMserv frame - Black Glass doors - Anthracite Steel doors - Anthracite Top cover - Anthracite Side panels - Anthracite Height IMnet 25U = 1252 mm 42U = 2002 mm 47U = 2252 mm Min 20mm Max 40mm 416 Top cable access points

cabinet 19 application - for 800mm WIDE cabinet 452.00 123.

4 1SU=25.00 IMserv II Technical details 19 application -for 600mm wide cabinet 19 application - for 800mm WIDE cabinet ETSI application - 600mm WIDE cabinet

IMserv II Primary rack builds READY TO USE PRIMARY CABINET BUILDS The IMserv II Primary is a ready configured enclosure designed for your convenience.

5 IMserv II Primary rack builds READY TO USE PRIMARY CABINET BUILDS The IMserv II Primary is a ready configured enclosure designed for your convenience. One order code gives you a complete Primary enclosure ideal for housing active equipment, electronics and computer servers. It can also be used as the starting point for creating your own unique configured enclosure by adding additional accessories onto the IMserv II Primary enclosure build. Some of the additional accessories which should be considered are power strips, heavy duty sliding or fixed shelves, keyboard shelves, plinths and extension plinths, and up graded security All IMserv II accessories (fixed & sliding shelves etc.) Top mounted fan trays,power and cable management accessories, Castors and plinths, Earthing kits - Primary cabinet build Open frame mm steel Black RAL 9011 Front door - vented glazed or Front door - fully perforated steel Rear door - perforated double doors or Rear door - fully perforated steel Side panels mm dep cabinets Side panels mm deep cabinets Fully vented top cover with three cable access panels mm steel 4.0 mm toughened, tinted, glass Anthracite RAL mm steel Anthracite RAL pair Set of mm steel Anthracite RAL mm steel Anthracite RAL Panel mounts 2.0 mm steel Black RAL U cabinets - 25U 19 panels panels 2 pairs 2.0 mm steel Black RAL U cabinets - 42U 19 panel panels (front) - 14U 19 panel mounts (rear) 47U cabinets - 47U 19 panel panels (front) - 14U 19 panel mounts (rear) - 19U 19 panel mounts (rear) 1 pair 3 pairs 1 pair 2 pairs 1 pair 2.0 mm steel Black RAL mm steel Black RAL 9011 Panel mount supports, 2 pairs 2 pairs 1.5 mm steel Black RAL 9011 Earthing kit kit of 12 leads Adjustable feet kit of 4 - Primary, additional bay Open frame mm steel Black RAL 9011 Front door - vented glazed or Front door - fully perforated steel Rear door - perforated double doors or Rear door - fully perforated steel mm steel 4.0 mm toughened, tinted, glass Anthracite RAL mm steel Anthracite RAL 7016 Baying kit 4 pairs 1.2 mm steel Black RAL 9011 Fully vented top cover with three cable access panels mm steel Anthracite RAL Panel mounts 2.0 mm steel Black RAL U cabinets - 25U 19 panels panels 2 pairs 2.0 mm steel Black RAL U cabinets - 42U 19 panel panels (front) - 14U 19 panel mounts (rear) 1 pair 3 pairs 2.0 mm steel Black RAL U cabinets - 47U 19 panel panels (front) - 14U 19 panel mounts (rear) - 19U 19 panel mounts (rear) 1 pair 2 pairs 1 pair 2.0 mm steel Black RAL 9011 Panel mount supports, 2 pairs 2 pairs 1.5 mm steel Black RAL 9011 Earthing kit kit of 12 leads Adjustable feet kit of Kg

6 IMserv II Primary rack builds Primary IMserv II with double rear doors IMserv II Primary cabinet builds with glass vented M.O.Q. front door Net weight for kit (Kg) Anthracite RAL 7016 Height (U) x width x depth 1 25U 600 x ADDITIONAL BAY 25U 6x U 600 x ADDITIONAL BAY 42U 6x U 600 x ADDITIONAL BAY 47U 6x U 600 x 1, ADDITIONAL BAY 25U 6x U 600 x 1, ADDITIONAL BAY 42U 6x U 600 x 1, ADDITIONAL BAY 47U 6x U 800 x ADDITIONAL BAY 42U 8x U 800 x ADDITIONAL BAY 47U 8x U 800 x 1, ADDITIONAL BAY 42U 8x U 800 x 1, ADDITIONAL BAY 47U 8x IMserv II Primary cabinet builds with steel perforated front door Height (U) x width x depth 25U 600 x ADDITIONAL BAY 25U 6x U 600 x ADDITIONAL BAY 42U 6x U 600 x ADDITIONAL BAY 47U 6x U 600 x 1, ADDITIONAL BAY 25U 6x U 600 x 1, ADDITIONAL BAY 42U 6x U 600 x 1, ADDITIONAL BAY 47U 6x U 800 x ADDITIONAL BAY 42U 8x U 800 x ADDITIONAL BAY 47U 8x U 800 x 1, ADDITIONAL BAY 42U 8x U 800 x 1, ADDITIONAL BAY 47U 8x additional bay Technical features of IMserv II Open area of perforated steel doors is 60% to ensure good server cooling. Static load rating 900 Kg, design to accept the heaviest rack mounted servers Rear 19 panel mounts in the 42U and 47U cabinets split into three indepentent sections to allow multi-platform servers to be installed in the same cabinet. Double rear doors to minimise aisle obstruction when rear doors are open.

7 IMserv II Primary rack builds Primary IMserv II with single perforated steel door fitted on rear IMserv II Primary cabinet builds with glass vented front door Height (U) x width x depth M.O.Q Net weight for kit (kg) Anthracite RAL U 600 x ADDITIONAL BAY 25U 6x U 600 x ADDITIONAL BAY 42U 6x U 600 x ADDITIONAL BAY 47U 6x U 600 x ADDITIONAL BAY 25U 6x U 600 x ADDITIONAL BAY 42U 6x U 600 x ADDITIONAL BAY 47U 6x U 800 x ADDITIONAL BAY 42U 8x U 800 x ADDITIONAL BAY 47U 8x U 800 x ADDITIONAL BAY 42U 8x U 800 x ADDITIONAL BAY 47U 8x additional bay IMserv II Primary cabinet builds with steel perforated front & rear doors 25U 600 x ADDITIONAL BAY 25U 6x U 600 x ADDITIONAL BAY 42U 6x U 600 x ADDITIONAL BAY 47U 6x U 600 x ADDITIONAL BAY 25U 6x U 600 x ADDITIONAL BAY 42U 6x U 600 x ADDITIONAL BAY 47U 6x U 800 x ADDITIONAL BAY 42U 8x U 800 x ADDITIONAL BAY 47U 8x U 800 x ADDITIONAL BAY 42U 8x U 800 x ADDITIONAL BAY 47U 8x Technical features of IMserv II Open area of perforated steel doors is 60% to ensure good server cooling. Static load rating 900 Kg, design to accept the heaviest rack mounted servers Rear 19 panel mounts in the 42U and 47U cabinets split into three indepentent sections to allow multi-platform servers to be installed in the same cabinet.

8 IMserv II - open frame If you want to utilize the full capabilities and flexibility of the IMserv II enclosure system you can fully specify your cabinet starting from the IMserv II Open Frame onwards.this enables you to use non 19 shelves thereby utilizing the full width of the enclosure. This can be very beneficial when housing tower servers which have no requirement of 19 mounts or for accessing full length keyboards which not do fit between 19 mounts. Alternatively you can specify ETSI standard Panel mounts or even a mixture of 19 Panel mounts, ETSI Panel mounts and a full width section in the same enclosure. The possible combinations are nearly unlimited and therefore the possible applications are also nearly unlimited.when specifying your IMserv II please consider the position (height depth etc.) where you require your accessories to be mounted. The cabinet can then be delivery to your site ready for use without any further adjustments being required. All IMserv II doors, side panels, top covers, 19 panel mounts and panel mount supports. All IMserv II accessories (fixed & sliding shelves etc.) Top mounted fan trays Power and cable management accessories Castors and plinths - IMnet II open frame End frames mm steel Black RAL 9011 Vertical mm steel Black RAL 9011 Adjustable feet kit of 4 Fixings 900 Kg IMserv II Open frame M.O.Q. Net weight Black for kit (Kg) RAL 9011 Height (U) x width x depth 25U 600 x U 600 x 1, U 600 x U 600 x 1, U 800 x U 800 x 1, U 600 x U 600 x 1, U 800 x U 800 x 1,

IMserv II - front and rear doors Doors suitable for the front or rear of IMserv II are available in five options:- Fully perforated, steel doors, Glass, vented door, Double perforated, steel doors,

9 IMserv II - front and rear doors Doors suitable for the front or rear of IMserv II are available in five options:- Fully perforated, steel doors, Glass, vented door, Double perforated, steel doors, Non-vented steel doors, Non vented glass doors An IMserv II frame of the same height and width. Lock options including electronic locking. Earthing kits. Contents of glass door kit Description Qty finish Door mm steel 4.0 mm toughened tinted glass Anthracite RAL 7016 Fixings Contents of steel door kit Door mm steel Anthracite RAL 7016 Fixings Contents of double door kit Door 1 pair 1.0 mm steel Anthracite RAL 7016 Latching beams 1 pair 2.0 mm steel Black RAL 9011 Fixings - N/A IMserv II doors M.O.Q. Net weight Anthracite for kit (Kg) RAL 7016 Height (U) x width VENTED GLASS DOOR 25U x VENTED GLASS DOOR 42U x VENTED GLASS DOOR 42U x VENTED GLASS DOOR 47U x VENTED GLASS DOOR 47U x PLAIN GLASS DOOR 25U x PLAIN GLASS DOOR 42U x PLAIN GLASS DOOR 42U x PLAIN GLASS DOOR 47U x PLAIN GLASS DOOR 47U x VENTED STEEL DOOR 25U x VENTED STEEL DOOR 42U x VENTED STEEL DOOR 42U x VENTED STEEL DOOR 47U x VENTED STEEL DOOR 47U x PLAIN STEEL DOOR 25U x PLAIN STEEL DOOR 42U x PLAIN STEEL DOOR 42U x PLAIN STEEL DOOR 47U x PLAIN STEEL DOOR 47U x U X 600 VENTED DOUBLE DOOR U X 600 VENTED DOUBLE DOOR U X 800 VENTED DOUBLE DOOR U X 600 VENTED DOUBLE DOOR U X 800 VENTED DOUBLE DOOR

Lock options Both the metal and glass doors have a swing handle fitted as standard, complete with lock. Please note, high security locks for the swing handle need to be ordered separately.

10 Lock options Both the metal and glass doors have a swing handle fitted as standard, complete with lock. Please note, high security locks for the swing handle need to be ordered separately. Keyed alike lock self locking All locks supplied with the same key and the door automatically locks when closed. Keyed alike lock manual locking All locks supplied with the same key. To lock the door the key must be turned. Triangular key drive lock self locking The lock is operated by a triangular machine cabinet drive. The door automatically locks when closed. To be fitted to both glass and steel doors Contents of lock kits es Lock 1 Steel N/A M.O.Q. Keyed alike lock self locking Keyed alike lock manual locking Triangular key drive lock

Side panels for 1,000 mm deep are split into an 800 mm panel plus an additional 200 mm side panel. An IMserv frame of the same height and depth Earthing kits.

11 IMserv II - side panels Side panels, supplied in pairs, are available in metal with concealed catch locking. Side panels can only be removed once the front and rear doors have been open so the fixing catches can be undone. Side panels for 1,000 mm deep are split into an 800 mm panel plus an additional 200 mm side panel. An IMserv frame of the same height and depth Earthing kits. Side panels 1 pair 0.7 mm steel Anthracite RAL 7016 N/A Side panels Height (U) x depth M.O.Q. Net weight for kit (Kg) Anthracite RAL U X 800 DEEP U X 800 DEEP U X 800 DEEP U X 1000 DEEP U X 1000 DEEP U X 1000 DEEP

IMserv II - divider panel For use in bayed suites of IMserv II in applications such as data centres, the divider panel restricts access to adjacent cabinets while maintaining cross patching

12 IMserv II - divider panel For use in bayed suites of IMserv II in applications such as data centres, the divider panel restricts access to adjacent cabinets while maintaining cross patching capability. The divider panels are full height flat steel panels, held in place between adjacent cabinets by the baying kits. Secure apertures, which can only be opened by having access to both sides, are provided at appropriate locations to allow cross patching between cabinets. An IMserv II frame of the same height and depth. Divider panel mm steel Anthracite RAL 7016 N/A divider panel Height (U) x depth M.O.Q. Net weight for kit (Kg) Black RAL U X 800 DEEP U X 800 DEEP U X 1000 DEEP U X 1000 DEEP

IMserv II - top covers TOP COVERS Two types of top covers are available, a plain non-vented unit and a fully vented unit. Both tops are supplied with side and rear cable access areas.

13 IMserv II - top covers TOP COVERS Two types of top covers are available, a plain non-vented unit and a fully vented unit. Both tops are supplied with side and rear cable access areas. FULLY VENTED Allows air flow through a matrix of holes on the top surface. This top cover can also be used with a top mounted fan tray. NON-VENTED For applications where limited heat is generated within the cabinet. Can not be used with Top mounted Fan tray. An IMserv II frame of the same width and depth. Earthing kits. Top mounted fan trays for the fully vented version only. Top cover, cable entry brush kits Top cover 1 Fixings 0.9 mm steel Anthracite RAL 7016 N/A IMserv II top covers M.O.Q. Net weight for kit (Kg) Anthracite RAL 7016 Width x depth VENTED TOP COVER 600 X VENTED TOP COVER 600 X 1, VENTED TOP COVER 800 X VENTED TOP COVER 800 X 1, NON-VENTED TOP COVER 600 X NON-VENTED TOP COVER 600 X 1, NON-VENTED TOP COVER 800 X NON-VENTED TOP COVER 800 X 1,

Heavy-duty castor For easy movement of a loaded IMserv, Heavy-Duty braked castors are available.

Adjustable foot adaptor In applications where Heavy Duty Castors and Adjustable Feet are to be used,

The Adjustable foot adaptor kit adds to the length of the Adjustable feet, thereby compensating for

Adjustable feet These allow you to align your cabinet on uneven surfaces.

An adapter is required when feet are to be fitted as well as heavy-duty castors.

Note, adjustable feet are always required and are therefore included in both primary rack builds &

14 Heavy-duty castor For easy movement of a loaded IMserv, Heavy-Duty braked castors are available. Each castor has a load rating of 115Kg. Adjustable foot adaptor In applications where Heavy Duty Castors and Adjustable Feet are to be used, an Adjustable foot adaptor kit is also necessary. The Adjustable foot adaptor kit adds to the length of the Adjustable feet, thereby compensating for the height of the Heavy Duty Castors. Adjustable feet These allow you to align your cabinet on uneven surfaces. Adjustable feet are screwed directly into the end frame, using 12mm threads. An adapter is required when feet are to be fitted as well as heavy-duty castors. Adjustment is between 25mm and 40mm. Note, adjustable feet are always required and are therefore included in both primary rack builds & open frames. Bolting Down Clamps This is a kit of 4 clamps which fit over either the Adjustable feet or the Adjustable foot section of the castor- leveller combination. The clamps are bolted down using 8mm bolts (not supplied). Ordering information Description 4 Adjustable feet - spacer only Heavy duty castors Adjustable foot adapters Bolting down clamps

Baying kit The baying kit is designed for joining two enclosures of the same depth together, side by side, independent of whether they are an IMserv or IMnet.

Four pairs of brackets are required for baying, two at the front and two at the rear.

15 Baying kit The baying kit is designed for joining two enclosures of the same depth together, side by side, independent of whether they are an IMserv or IMnet. The baying kit fits to the front of the vertical therefore racks can be bayed, or unbayed easily even when fully loaded with equipment. Four pairs of brackets are required for baying, two at the front and two at the rear. Ordering Information Description 4 pairs baying kits Horizontal Baying Trim A horizontal trim kit is used to prevent foriegn bodies falling down the slot between the to enclosures. Ordering Information Description MOQ 800 mm deep mm deep

16 100 mm spacer system between cabinets n Holds large volumes of cables n Leaves the cabinet free of cables n Seals cables away in a separate secure area n Transforms a 600 mm wide cabinet to 700 mm wide when bayed n Transforms an 800 mm wide cabinet to 900mm wide when bayed n Ideal backbone cabling To allow for high density of cables, the IMnet and IMserv cabinet ranges both offer an unrivalled spacing system. A 100 wide space can be created between bayed racks. Locked front and rear covers enclose this cabling void. This has two advantages, firstly a large unrestricted area for cables and secondly it leaves the cabinet uncluttered for housing active equipment.the spacing system can be used to link together cabinets of the same height and depth independent of their width or if they are IMserv or IMnet. An IMserv II frame of the same height and depth. 100 mm baying brackets 4 Black RAL 9011 Front & Rear cover 1 pair Anthracite RAL 7016 Top cover 1 Fixings 0.9 mm steel Anthracite RAL 7016 N/A 100 mm spacer system M.O.Q. Net weight for kit (Kg) Anthracite RAL 7016 Width x depth 25U x 800 deep 100mm spacer system U x 800 deep 100mm spacer system U x 800 deep 100mm spacer system U x 1000 deep 100mm spacer system U x 1000 deep 100mm spacer system U x 1000 deep 100mm spacer system

Raft - floor tile replacement plinth The Raft mounting system (floor tile replacement plinth) replaces the 600 x 600 mm floor tile with a raised plinth that allows any

The Raft permits the floor tile in front of and behind the cabinet to be removed so access to the false floor void can the easily gained.

A bays of three cabinets, total width 2,400 mm (3 x 800 = 2,400 mm), fitted onto a row of four Rafts (4 x 600mm = 2,400 mm) Note: If double doors are to be used an

17 Raft - floor tile replacement plinth The Raft mounting system (floor tile replacement plinth) replaces the 600 x 600 mm floor tile with a raised plinth that allows any size of IMnet II cabinet to site onto the plinth. The Raft permits the floor tile in front of and behind the cabinet to be removed so access to the false floor void can the easily gained. When using 800 mm wide IMnet II s they must be used in bays (groups)of three. A bays of three cabinets, total width 2,400 mm (3 x 800 = 2,400 mm), fitted onto a row of four Rafts (4 x 600mm = 2,400 mm) Note: If double doors are to be used an additional part needs to be ordered. IMserv II cabinets and open frames Raft 1 Adaptor brackets 2 Fixings 1.5 mm steel 1.5 mm steel Black RAL 9011 Black RAL kg Raft M.O.Q. Net weight for kit (Kg) Anthracite RAL 7016 Width x depth RAFT KIT FOR 800 DEEP IMSERV RAFT KIT FOR 1000 DEEP IMSERV RAFT SPLIT DOOR CROSS BEAM RAFT SPLIT DOOR CROSS BEAM

Cable and power strip management in IMserv 1,000 mm deep The rear section of an IMserv 1,000mm deep enclosure provides an ideal unrestricted open area for running cables and for mounting power strips.

18 Cable and power strip management in IMserv 1,000 mm deep The rear section of an IMserv 1,000mm deep enclosure provides an ideal unrestricted open area for running cables and for mounting power strips.the Cable / Power strip mounting system, provides a full length tray for this purpose which is equally suitable for both stand alone or bayed IMserv applications.the kit consists of a full height cable tray, 200mm wide. The tray is large enough for both PDPs and cables to be installed together. IMserv II cabinets that are 1,000 mm deep Cable tray mm steel Black RAL 9011 Fixings n/a Rear cable tray M.O.Q. Net weight for kit (Kg) Black RAL 9011 Width x depth 25U x 200 CABLE / PDP PANEL U x 200 CABLE / PDP PANEL U x 200 CABLE / PDP PANEL

Top cable management TOP, SIDE BRUSH ENTRY SYSTEM For top cable entry applications, cables can enter the cabinet on either side of the top cover and/or at the rear of the top cover.

Supplied in pairs for either side of the top cover. TOP, REAR BRUSH ENTRY SYSTEM For top cable entry applications, for the rear of the top cover.

19 Top cable management TOP, SIDE BRUSH ENTRY SYSTEM For top cable entry applications, cables can enter the cabinet on either side of the top cover and/or at the rear of the top cover. The top, side brush entry system provides a smooth curved edge for the cable to flow over plus a brush sealing system to minimize the dust entering the cabinet via the same aperture. Supplied in pairs for either side of the top cover. TOP, REAR BRUSH ENTRY SYSTEM For top cable entry applications, for the rear of the top cover. The top, rear brush entry system provides a smooth curved edge for the cable to flow over plus a brush sealing system to minimize the dust entering the cabinet via the same aperture. An IMserv II top cover Top side cable entry system 1 pair Plastic Purple Rear cable entry system 1 off Plastic Purple N/A Top cover cable entry systems M.O.Q. Net weight for kit (Kg) Anthracite RAL 7016 TOP, SIDE BRUSH ENTRY SYSTEM TOP, REAR BRUSH ENTRY SYSTEM

Cable management CableControl (Mk II) is a cable management system design to not only aid cable installation but also help reduce damage to cabling.

Improves cable management. Speeds up cable dressing during installation and maintenance.

The cable control bobbin can be used at the end of the panel, if required, to guide and retain the cables in the 50mm vertical channel when using 19 mounts in a 600 mm wide IMnet or IMserv.

20 Cable management CableControl (Mk II) is a cable management system design to not only aid cable installation but also help reduce damage to cabling. Features Contributes to your cabling installation meeting EIA/ TIA-568-A for category 5. Helps cables maintain performance for the life of the system. Helps cables provide maximum data through put. Improves cable management. Speeds up cable dressing during installation and maintenance. 1U Cable management panel 19 cable management panel fitted with three cabling retention supports, plus an additional cable control bobbin. The cable control bobbin can be used at the end of the panel, if required, to guide and retain the cables in the 50mm vertical channel when using 19 mounts in a 600 mm wide IMnet or IMserv. 1U and 2U Cable management 2U Cable management panel 19 cable management panel fitted with three cabling retention supports, plus an additional cable control bobbin. The cable control bobbin can be used at the end of the panel, if required, to guide and retain the cables in the 50mm vertical channel when using 19 mounts in a 600 mm wide IMnet. Ordering Information Description U Cable management panel - blue U Cable management panel - blue U Cable management panel - purple U Cable management panel - purple U Cable storage shelf 2U 19 shelf unit supplied complete with four semi-circular bobbins. The shelf provides storage for excess lengths of patch cords. 2U Cable storage shelf Ordering Information Description U Cable storage shelf - blue Cabinet to cabinet management A cabling retention support for bayed applications where cabinets are connected by vertical to vertical. The unit fits in front of the verticals and manages patch cords passing from one cabinet to the next. Supplied in kits of mm spacer cabinet to cabinet management A cabling retention support for bayed applications where cabinets are connected by the 100mm spacer system. The unit fits in front of the verticals and manages patch cords passing from cabinet to the next. Supplied in kits of 4. Ordering Information Description 4 Cabinet to cabinet management - blue mm spacer cabinet to cabinet management - blue Cabinet to cabinet management 20

125mm channel window moulding The 125mm channel window moulding clips into the apertures provided on both sides of the 19 panel mounts used in 800mm wide IMnet enclosures.

The 125mm window mouldings can be fitted to both the front and rear of each aperture, if desired.

Information Description 10 125mm channel window moulding - blue 593-599469 10 125mm channel window moulding - purple 627-599469 125mm Channel window moulding 125mm channel cable retention bobbins The

21 125mm channel window moulding The 125mm channel window moulding clips into the apertures provided on both sides of the 19 panel mounts used in 800mm wide IMnet enclosures. It provides a smooth curved surface around the apertures through which cables can be passed. The 125mm window moulding has been designed to be used with the 125mm channel retention bobbins. The 125mm window mouldings can be fitted to both the front and rear of each aperture, if desired. The maximum number of window moulding which can be fitted is as follows:- Height Front Only Front & Rear 25U 16 off 32 off 42U 28 off 56 off 47U 32 off 64 off Supplied in packs of 10 Ordering Information Description mm channel window moulding - blue mm channel window moulding - purple mm Channel window moulding 125mm channel cable retention bobbins The 125mm channel cable retention bobbins can be used with the 19 panel mounts for 800mm wide IMnet & IMserv enclosures. They retain the cables in the channel and control the cables bend radii when cables are taken across onto the horizontal cable management panels. The maximum number of cable retention bobbins that can be fitted onto a pair of 19 panel mounts for an 800mm enclosure is as follows:- Height Front Only Front & Rear 25U 10 off 26 off 42U 16 off 32 off 47U 18 off 64 off Supplied in packs of 10 Ordering Information Description mm channel cable retention bobbins - blue mm channel cable retention bobbins - purple mm Channel cable retention bobbins black steel cable hoops Can be used in 800mm wide IMnet and IMserv Ordering Information Description 10 Double cable hoops 800/19" Black steel cable hoops 21

STEEL CABLE TRAYS 1500mm x 300 mm by 13mm deep, multi-punched for accepting cable ties etc. Easy to cut and will not damage or cut into cables.

22 Cable Management 1. PLASTIC CABLE TRUNKING A plastic trough measuring 80mm wide by 40mm deep externally with a snap-on cover. Supplied in 2m lengths and easily cut for other sizes. 2. STEEL CABLE TRAYS Four alternative lengths, all 152mm wide by 12,7mm deep and multipunched for accepting cable ties etc STEEL CABLE TRAYS 1500mm x 300 mm by 13mm deep, multi-punched for accepting cable ties etc. Easy to cut and will not damage or cut into cables. 4 & 5 CABLE MANAGEMENT PANELS 19 mounting cable entry, brush strip and cable hoop panels 3 6. CABLE BAR For 19 mounting and support cable at the rear of panel mounts Items 1, 2 & 3 fit to 'panel mounting supports'. Items 4, 5, & 6 fit horizontally across the '19" panel mounts'. All items suppulied with fixings N/A M.O.Q. Net weight for kit (Kg) 1. Plastic trunking 2m long (45U) Steel cable trays 1703mm (38U) Steel cable trays 1925mm (43U) mm steel cable tray 1500mm (34U) Black cable management panel 1U Black cable management panel 2U Cable bar

23 19 Panel Mounts for IMserv II (server mounts) The IMserv II has been specifically designed to house servers and other active equipment. Servers, up to 680mm in depth, will fit into an 800mm deep IMserv. Larger servers must be fitted into 1,000 mm deep IMserv II. The IMserv II 19 panel mounts have been designed to allow servers to be fitted using their manufactures standard slide kit. The 42U and 47U height 19 Panel Mount kits have the rear 19 panel mount rails cut into three independently adjustable section, this allow three different length slides to be fitted into the same enclosure thereby creating a multi-platform solution for housing servers. An IMserv II frame of the matching height and width. Front 19 panel mounts - full length Rear 19 panel mounts 25U kit 42U kit 47U kit 19 panel mount kits for 800 wide enclosure ONLY. 1 pair 1 pair - full length 3 pairs - 14U in length 2 pairs -14U + 1 pair 19U in length 2 pairs of cable reducing channnels Black RAL 9011 Black RAL 9011 Black RAL kg 19 panel mount kits M.O.Q. Net weight for kit (Kg) Black RAL 9011 Height x width 19 Server mount kit 25u x Server mount kit 25u x Server mount kit 42u x Server mount kit 42u x Server mount kit 47u x Server mount kit 47u x

Note; use 2 kits for mounting full length panel mounts in a 25U (45 SU) and 36U (65SU) rack, use 3 kits in a 42U (75 SU) and 47U (85SU) rack Panel Mount Supports - Painted

24 Panel mount supports. These fit between the rack s verticals to allow adjustment of 19 and ETSI panel mounts throughout the depth of the rack. Equipment can, as a result, be fitted flush with the front face of the vertical or be inserted all the way to the rear of the unit. Note; use 2 kits for mounting full length panel mounts in a 25U (45 SU) and 36U (65SU) rack, use 3 kits in a 42U (75 SU) and 47U (85SU) rack Panel Mount Supports - Painted Item/Description Material/Finish 2 Panel Mount Supports Steel, Paint BLACK 4 Retention Clips BLACK Plastic Panel Mount Supports - Painted Ordering information To suit rack size (nominal) Depth 1 pair per kit pair per kit 800/

25 1SU=25.00 IMserv II Configure Your Own Cabinet ETSI Mounts for 600mm wide rack Painted or conductive ETSI Panel Mounts are supplied in pairs to provide ETSI mounting positions with hole pattern to accept captive nuts on SU spacing. The ETSI panel mounts can be attached directly to the rack s verticals or may be fitted onto the Panel Mount Supports to give adjustment throughout the depth of the rack. ETSI application - 600mm wide cabinet ETSI Mounts for 600mm wide rack - Painted Item/Description Material/Finish 2 ETSI Panel mount Steel, Paint BLACK 4 Retention pins BLACK Plastic 4 Retention screw fixings Steel Zinc plate and passivate Ordering information 1 pair per kit To suit rack size (nominal) Height (SU) H W 75 75SU(42U) 600mm SU(47U) 600mm ETSI Mounts for 600mm wide rack - Conductive Item/Description Material/Finish 2 ETSI Panel mount Steel Zinc plate and passivate 4 Retention pins BLACK Plastic 4 Retention screw fixings Steel Zinc plate and passivate Ordering information 1 pair per kit To suit rack size (nominal) Height (SU) H W 75 75SU(42U) 600mm SU(47U) 600mm Cross members. Cross members fit across the rack between verticals, to allow for the fitting of DIN rails, cable trays or to offer support for cables at the rear of the rack. The use of 2 or 3 members allow customers to attach their own design of rear mounting panels. Item/Description Material/Finish 1 Cross Member Steel, Paint BLACK 4 Retention CLIPS BLACK Plastic Cross members Ordering information To suit rack size (nominal) Width 1 per kit 600mm per kit 800mm

UNIT IDENTIFICATION STRIPS These self-adhesive strips fit to the cabinet s vertical members and simplify the task of positioning panels/equipment accurately on the U spacing.

Ordering information Description s Unit identification strips 603-10099 Caged nut insertion tool Ordering information Description s Caged nut insertion tool 802-557377 Unit

100 593-599681 Caged nut insertion tool Caged nuts, fixings and front panels Shown here are the fixings suitable for fitting front panels.

screws and cup washers 1000 645-599684 M6 caged nuts 100 645-10023 M6 caged nuts 1000 645-599686 M6 cage nut with earth continuity 100 645-558718 whizz screw tight Whizz nut

Painted black to match the IMnet and IMserv frame and supplied complete with fixed screws, washers and cup washers.

26 UNIT IDENTIFICATION STRIPS These self-adhesive strips fit to the cabinet s vertical members and simplify the task of positioning panels/equipment accurately on the U spacing. They are supplied in sections to suit racks up to 47U height and are easily cut for other sizes. Attractive black finish with silver numerics. Ordering information Description s Unit identification strips Caged nut insertion tool Ordering information Description s Caged nut insertion tool Unit identification strips Accessory fixings Ordering information Description PK s M6 x 12mm whizz tight screws M6 whizz tight nut Plastic retention pins Caged nut insertion tool Caged nuts, fixings and front panels Shown here are the fixings suitable for fitting front panels. Ordering information Description PK s M6 x 18mm pozi drive screws and cup washers M6 x 18mm slotted screws and cup washers M6 x 18mm pozi drive screws and cup washers M6 caged nuts M6 caged nuts M6 cage nut with earth continuity whizz screw tight Whizz nut Screw M6 x 18 tight Cup washer Cup washer Caged nut M6 x 10 pozzi 19 front panels A comprehensive range of steel front panels are available in 1.6mm steel with flanged edges. Painted black to match the IMnet and IMserv frame and supplied complete with fixed screws, washers and cup washers. Ordering information Description Unit height - 19 Front panels Panels per Pack s 1U 5 off U 5 off U 5 off U 5 off U 5 off U 2off U Vented 5 off U Vented 5 off Multi pack 2x1U, 1x2U, 1x3U, 1x4U and 1x5U and ETSI Front panels 26

19" CANTILEVER SHELVES - front screw fixing 19 cantilever shelves fit

The shelves occupy 2U of panel mounting height.

Steel Paint BLACK 4 Screw fixings Steel 400mm deep cantilever shelf Ordering

wide shelf 00mm+ 593-599791 255mm deep cantilever shelf Cantilever shelves -

verticals, for applications were panel mounts are not required.

Item/Description Material/Finish 1 shelf - full width, hook-in Steel, Paint

27 19" CANTILEVER SHELVES - front screw fixing 19 cantilever shelves fit directly to the 19 panel mounts. The shelves occupy 2U of panel mounting height. Load rating 20kg Item/Description Material/Finish 1 19 cantilever shelf Steel Paint BLACK 4 Screw fixings Steel 400mm deep cantilever shelf Ordering information Description 255mm deep, 19 wide shelf mm deep, 19 wide shelf 00mm mm deep cantilever shelf Cantilever shelves - Full width hook-in These fast fitting shelves hook directly into the rack verticals, for applications were panel mounts are not required. Load rating 50kg. Note: 800 or 1000mm deep IMserv only. Item/Description Material/Finish 1 shelf - full width, hook-in Steel, Paint - BLACK 2 Retention clips BLACK Plastic Ordering information Item/Description 600mm wide x400mm deep shelf mm wide x400mm deep shelf Full width hook-in cantilever shelf 27

The horizontal sections of the supports are prepunched to allow the chassis trays to be fitted without further drilling. Nominal load rating is 50kg. Chassis supports are sold in pairs.

28 Chassis supports These steel supports may be varied along the depth of the rack and offer an ideal method of supporting heavy equipment. When used in conjunction with 19 equipment they position cardframes accurately in line with U heights. The horizontal sections of the supports are prepunched to allow the chassis trays to be fitted without further drilling. Nominal load rating is 50kg. Chassis supports are sold in pairs. To be fitted to standard 19 Panel Mount Angles or fitted front & rear in the cabinet Chassis trays and Heavy duty shevles mount onto Chassis Supports Chassis Support mm steel Black RAL 9011 fixing 50 kg Length (min cabinet depth) M.O.Q. Net weight for kit (Kg) Black RAL mm (400 mm) mm (500 mm) mm (600 mm) mm (700 mm) mm (800 mm)* mm mm to 870 mm in steps of 100 mm * Recommended for supporting servers in 800 and 1000mm deep cabinet 28

Chassis trays These steel trays come in four depths so that the correct depth for your installation may be selected without interfering with cabling or power distribution at the rear.

29 Chassis trays These steel trays come in four depths so that the correct depth for your installation may be selected without interfering with cabling or power distribution at the rear. The slots in the tray allow for airflow and, at the same time, offer a selection of fixing positions to allow modems and instruments to be screwed into position. With this style of tray a pair of chassis supports is also required. Note: panel mountings must be fitted, a pair front and rear. To be fitted onto Chassis Supports Chassis tray 1 fixing 1.5 mm steel Black RAL kg W X D M.O.Q. Net weight for kit (Kg) Black RAL (600mm) x 256 mm (600mm) x 356 mm (600mm) x 456 mm (600mm) x 556 mm

Heavy duty shelves For applications where heavy loads are required, this shelf offers a load capacity of 100 kg. Slotted holes offer air passage and also provide simple fixing positions.

30 Heavy duty shelves For applications where heavy loads are required, this shelf offers a load capacity of 100 kg. Slotted holes offer air passage and also provide simple fixing positions. Must be fitted to two pairs of Chassis Supports es Heavy duty shelf mm steel Black RAL 9011 fixing 100 kg W X D M.O.Q. Net weight Black RAL 9011 for kit (Kg) 19 (600mm) x 472 mm (600mm) x 627 mm (600mm) x 754 mm

31 Sliding shelves - 19" fixing This shelf will fit into an IMRAK IMserv or IMnet enclosure that has 19 panel mounts fitted in the front and rear of the enclosure, independent of whether the enclosure is 600mm or 800mm wide. The supporting surface of the shelf is in-line with the bottom of the U above it, therefore the shelf can be used to support both 19 mounted equipment as well as non 19 mounted Must be used with 19" Panel Mounting Angles fitted front and rear. Keyboard shelf mm steel Black RAL 9011 Slides 2 steel Mounting brackets 4 steel fixing 35 kg W X D M.O.Q. Net weight Black RAL 9011 for kit (Kg) Sliding shelf 19" x 425 mm Sliding shelf 19" x 625 mm

32 Keyboard shelves - 19" fixing Sliding keyboard shelves designed to support a keyboard and mouse. Each shelf is supplied with an area to house both the keyboard and the mouse plus a wrist rest/mouse mat. the shelvf is 19 mounted X 425mm This keyboard shelf will fit into IMRAK, IMnet or IMserv but 19 panel mounts must be fitted in the front and rear of the enclosure. It can only be used for keyboards which are 450mm or less in length. Must be used with 19" Panel Mounting Angles fitted front and rear. Keyboard shelf mm steel Black RAL 9011 Mouse mat / wrist rest 1 Slides 2 steel Mounting brackets 4 steel fixing 35 kg W X D M.O.Q. Net weight Black RAL 9011 for kit (Kg) Keyboard shelf 19" x 425 mm

Heavy duty sliding shelves - 19" fixing Ideal for tower and cabinet mounted servers plus cabinet mounted and non-cabineted UPS units, which weigh up to 100kg.

The supporting surface of the shelf is in-line with the bottom of the U above it, therefore the shelf can be used to support both 19 mounted equipment and non 19 mounted systems. Warning.

33 Heavy duty sliding shelves - 19" fixing Ideal for tower and cabinet mounted servers plus cabinet mounted and non-cabineted UPS units, which weigh up to 100kg. These sliding shelves will fit into IMRAK and IMserv enclosures when 19 panel mounts are fitted in the front and rear of the enclosure, independent of whether the enclosure is 600mm or 800mm wide. The supporting surface of the shelf is in-line with the bottom of the U above it, therefore the shelf can be used to support both 19 mounted equipment and non 19 mounted systems. Warning. The enclosure should be fitted with an extension plinth or bolted down, to ensure the cabinet does not over balance when sliding shelves are used. Must be used with 19" Panel Mounting Angles fitted front and rear, in 800mm deep cabinets. Heavy duty shelf mm steel Black RAL 9011 Heavy duty slides 2 steel Mounting brackets 4 steel fixing 100 kg W X D M.O.Q. Black RAL 9011 Sliding shelf 19" x 630 mm Extension plinths Extension plinths are designed to provide increased stability. They are recommended for applications where heavy equipment is mounted on slides, (alternatively, the cabinet should be clamped to the floor). The Extension plinth consists of a formed plate which is bolted to the front edge of the IMserv end frame. Ordering information Description For use with Heavy duty caster Extension plinths for 600mm wide IMserv Extension plinths for 800mm wide IMserv For use with adjustable feet only Extension plinths for 600mm wide IMserv Extension plinths for 800mm wide IMserv

100 MM PLINTH The 100mm plinth provides cable access under the cabinet, especially in applications where a false computer floor is not available.

Alternatively the infill panels can be removed to provide cable access. Adjustable feet can be used with the 100mm plinth but need to be ordered separately.

34 100 MM PLINTH The 100mm plinth provides cable access under the cabinet, especially in applications where a false computer floor is not available. The 100mm plinth kit consists of corner sections plus four removable infi ll panels. The infi ll panels are available as vented or non-vented. Alternatively the infill panels can be removed to provide cable access. Adjustable feet can be used with the 100mm plinth but need to be ordered separately. Notes: Castors can NOT be used If double doors are to be used an additional part needs to be ordered. An IMserv II frame of the same width and depth. 100 mm plinth -supports 1 pair Front & Rear cover 1 pair 1.5 mm steel 0.9 mm steel Black RAL 9011 Anthracite RAL 7016 Side covers 1 pair 0.9 mm steel Anthracite RAL 7016 Fixings 900 Kg 100 mm plinth M.O.Q. Width x depth 600 X 800 VENTED 100MM PLINTH 600 X 1,000 VENTED 100MM PLINTH 800 X 800 VENTED 100MM PLINTH 800 X 1,000 VENTED 100MM PLINTH Anthracite RAL X 800 NON-VENTED 100MM PLINTH 600 X 1,000 NON-VENTED 100MM PLINTH 800 X 800 NON-VENTED 100MM PLINTH 800 X 1,000 NON-VENTED 100MM PLINTH RAFT / PLINTH SPLIT DOOR CROSS BEAM 600W RAFT / PLINTH SPLIT DOOR CROSS BEAM 800W

Fan trays - Cabinet cooling top mounted Top mounted fan trays are available to aid the cooling of your equipment. They are designed to give maximum air flow with minimum noise generated.

35 Fan trays - Cabinet cooling top mounted Top mounted fan trays are available to aid the cooling of your equipment. They are designed to give maximum air flow with minimum noise generated. These may be retrofitted to the Fully Vented Top and occupy none of the usable U height or restrict the top cable access points. The electrical connection for all fan trays is by means of an angled CEE 22 mains inlet, ordered separately. Standard fan trays 230v AC fans For applications requiring a high level of forced air extraction to meet the thermal requirements of the equipment. Low noise fan trays 230v ac fans Standard and low noise fan trays For areas where minimizing noise takes priority over the volume of air extracted from the cabinet, applicable when the cabinet is close to personnel and the thermal demands are moderate. Monitored Fan Trays MFT v AC input Pot. 2. Settings Max. 100% Min 40% 80% Pot.1 set at 80% Designed to give the best attributes of both standard and low noise AC Fan trays, by monitoring the extracted air flow and increasing fan speed as temperature rises. i.e. low noise at lower temperatures and maximum airflow at higher temperatures. Fan Speed When used to thermally protect mission critical equipment a range of accessories are available to meet different customer requirements. Min. 60% Features Lower average noise level at room temperature At a fan failure, alarm visual or TTL logic. Audible or remote available Local or remote monitoring and alarm Extended fan life due to the lower average speed 3 separate sensor circuits for fan control World wide i) Input voltage ii) UL, CSA and CE approvals Temp. C MFT Characteristics of variable sensor with pot settings Ordering information Fan Tray Type Cabinet width Cabinet depth Number of fans Standard Fan Tray 230v AC 600/800mm 600/1000mm 4 supplied (max 5) Low noise fan tray 230v AC 600/800mm 600/1000mm 4 supplied (max 5) MTF fixed sensor range 25 C-45 C 600/800mm 600/1000mm 4 supplied (max 5) m mains lead with LED CEE22 plug and 13 amp UK plug m mains lead with LED CEE22 plug and Schuko (German/French) plug fan tray accessories for Top mounted and 19 1U MFT fan trays. Description Use Order Code Standard Fan Replacement / additional fan Low noise Fan Replacement / additional fan Standard/Low noise 5 link AC daisy chain needed when 5 fans are to be used Standard/Low noise 6 link AC daisy chain needed when 6 fans are to be used Note:115v AC standard or low noise Fan trays available, please ask sales desk. MFT Fan tray set at 230v AC input. Change jumper for 115v ac working. All fans use ball bearings for extra life. 35

36 Hi-flow top cover with fans The hi-flow top cover is a complete top cover that is supplied complete with five 6 230V fans built into it. Its air flow of 850 CFM is nearly three times that of a conventional 4 fan, fan tray. The top also is supplied with three cable access panels, one either side and a one at the rear of the cover. An IMserv II frame of the same width and depth. Power lead need to be order separately. Top cover, cable entry brush kits top cover mm steel Cable access panels 3 Anthracite RAL 7016 Anthracite RAL V fans 5 Black wiring Fixings Air flow 850 CFM Hi flow fan top M.O.Q. Net weight for kit (Kg) Anthracite RAL 7016 Width x depth 600 X 1,000 HI-FLOW FAN TOP X 1,000 HI-FLOW FAN TOP Power leads 2m mains lead with UK 13A plug fitted m mains lead with Schuko plug fitted

Earthing Squid - Earth Continuity system The unique, rapid fix, earthing Squid system comprises of four self contained tri-lead connectors (4 off Squid connectors) plus a main M6 earth bolt.

The four tri-leads therefore provide 12 leads which connect to the earthing studs on the cladding and leave extra leads for connecting to accessories and/ or electronic equipment.

nut and earthing washer at each end, plus 20 push-in M6 earthing studs. The system has been designed to provide additional rapid fix earthing leads for accessories.

spacer strips. They have male spade fixing positions at ½ U intervals and can be mounted on any flat surface.

37 Earthing Squid - Earth Continuity system The unique, rapid fix, earthing Squid system comprises of four self contained tri-lead connectors (4 off Squid connectors) plus a main M6 earth bolt. At the end of each lead is a M6 captive nut and earthing washer. The tri-lead connectors are connected to the earthing clamp plates situated on the top four corners of the cabinet s frame. The four tri-leads therefore provide 12 leads which connect to the earthing studs on the cladding and leave extra leads for connecting to accessories and/ or electronic equipment. Ordering information Item/Description 1 Earthing Squid kit Earthing kits Earth Continuity extension kit for accessories This kit contains 10 earthing leads, all of which has a M6 captive nut and earthing washer at each end, plus 20 push-in M6 earthing studs. The system has been designed to provide additional rapid fix earthing leads for accessories. Ordering information Item/Description A kit of 10 accessory earthing leads Earthing bars These earthing bars offer the option of bonded earth or isolated earth condition by using insulated spacer strips. They have male spade fixing positions at ½ U intervals and can be mounted on any flat surface. Mounting holes allow mounting without further drilling on the inside faces of the cabinet as illustrated. Made from nickel plated copper, the earth busbars have a rating of 40 amps and can be cut to length. Main earth is provided by M6 stud at both ends. Ordering information Item/Description 1 earthing bar 13U earthing bar 27U earthing bar 39U Earthing bars 37

Note: The busbar is simply fitted to the blocks using 'snap-on' clips.

38 Busbar system - earthing This is a copper common earth/neutral busbar which is normally fitted to the rear vertical members of the rack. It is rated at 140 amps and supported by polyamide insulating blocks which will accept 4mm, 5/32" or 6BA fixing screws. There are three sizes of terminals for conductor sizes 1,5 to 35mm. Note: The busbar is simply fitted to the blocks using 'snap-on' clips. Item/Description 1 copper bar 10mm x 3mm x 1000mm 3 insulated mounting blocks 1 large terminal 16-35mm 2 conductor 10 small terminals 1,5-4mm 2 conductor Earth continuity kits Ordering information Item/Description Qty 1 busbar kit Accessories Copper bar 10mm x 3mm x 1000mm Insulated mtg. Block Large terminal 16-35mm conductor B Small terminal 1,5-4mm conductor Medium terminal 4-14mm conductor Document holder A plastic self-adhesive document holder is available which can be fixed to any flat surface. It is available in A5 and A4 sizes. Ordering information W x H x D (mm) A5 size 250 x 145 x A4 size 355 x 195 x Magnetic lights Document holder This magnetically attached light is ideal for use in any environment with steel racks. Using a high output, lower power consumption (11 watts) U-shaped fluorescent tube gives long life. This unit is not supplied with a plug and lead, which should be ordered separately. To be fitted onto Chassis Supports es Magnetic light 1 Plastic Light grey fixing W X D Light, Schuko version, 230V, 351 x 65 x 62mm Light, UK version, 230V, 351 x 65 x 62mm * Light grey M.O.Q ,8m lead, Schuko plug ,0m lead, 13A plug * Commercial product only. 38

IMserv II power distribution Power management To be fitted onto Chassis Supports or cable trays. W X D M.O.Q. Net weight Black for kit (Kg) 5 way UK 19"PDU with UK plug, 3m lead 1 1.

39 IMserv II power distribution Power management To be fitted onto Chassis Supports or cable trays. W X D M.O.Q. Net weight Black for kit (Kg) 5 way UK 19"PDU with UK plug, 3m lead way UK PDU with UK plug, 3m lead way UK PDU with UK plug, 3m lead way UK PDU with UK plug, 3m lead way UK PDU with BS4343 plug, 16A, 3m lead way UK PDU with BS4343 plug, 32A, 3m lead way IEC "PDU with UK plug, 3m lead way Schuko 19"PDU with Schuko plug, 3m lead way Schuko PDU with Schuko plug, 3m lead way Schuko PDU with Schuko plug, 3m lead D 12 way Schuko PDU with Schuko plug, 3m lead B 12 way Schuko PDU with BS4343 plug, 16A, 3m lead F 12 way Schuko PDU with BS4343 plug, 32A, 3m lead D 7 way IEC "PDU with Schuko plug, 3m lead way French 19"PDU with French plug, 3m lead way French PDU with French plug, 3m lead way French PDU with French plug, 3m lead B 12 way French PDU with French plug, 3m lead L 12 way French PDU with BS4343 plug, 16A, 3m lead J 12 way French PDU with BS4343 plug, 32A, 3m lead G 7 way IEC "PDU with French plug, 3m lead ARC monitored 8 way PDU with 3m lead, UK plug ARC monitored 12 way PDU with 3m lead, UK plug ARC monitored & controlled 8 way PDU with 3m lead, UK plug ARC monitored & controlled 12 way PDU with 3m lead, UK plug ARC monitored 8 way PDU with 3m lead, Schuko plug ARC monitored 12 way PDU with 3m lead, Schuko plug ARC monitored & controlled 8 way PDU with 3m lead, Schuko plug ARC monitored & controlled 12 way PDU with 3m lead, Schuko plug ARC monitored 8 way PDU with 3m lead, French plug ARC monitored 12 way PDU with 3m lead, French plug ARC monitored & controlled 8 way PDU with 3m lead, French plug ARC monitored & controlled 12 way PDU with 3m lead, French plug

8026.4705 phone +44 23.8026.4520 fax Beauvais, France +33.3.44.02.81.81 phone +33.3.44.02.57.

343.150 phone +31 252.340.844 fax Shanghai, PRC +86 21.66080099 phone +86 21.

40 Sales Offices: Chandlers Ford, Eastleigh, Hampshire, UK phone fax Beauvais, France phone fax Torino, Italy phone fax Noordwijkerhout, Netherlands phone fax Shanghai, PRC phone fax For more information, please contact us today CALL UK June 06-UK. For the latest version of this publication, go to

SPECIFICATION GUIDE-IMRAK

Enclosure Solutions SPECIFICATION GUIDE-IMRAK Issue 3. June 06 Contents Technical specifications 3 IMRAK ServerMax Primary rack builds 4, 5 IMRAK 1400 Primary rack builds 6, 7 Open frames 8 Side panels