KE ELECTRONIC CONTROL SYSTEMS A NEW LEVEL OF CONTROL
|
|
|
- Angelica Fisher
- 5 years ago
- Views:
Transcription
1 KE ELECTRONIC CONTROL SYSTEMS A NEW LEVEL OF CONTROL
2 KE ELECTRONIC CONTROL SYSTEMS A new level of control performance for inboard, outboard or stern-drive engines KE Control Head KE Control Systems are a perfect answer to smooth and easy shift and throttle control suitable for most applications. Modern styling, various color/finish control head options, single to quad engine capability. Designed specifically to meet the performance, reliability endurance and aesthetic requirements of today s modern boats. KE+ Outboard Control Head KE+ Inboard Control Head Port control lever With optional master trim control button. Individual trim control circuit also available as option Starboard control lever 5 3 Throttle zone for lever 6 4 LED s indicate shift position (FNR) 5 LED indicates sync function 6 SELECT & SYNC activation buttons
3 KE CONTROLS SELECTION GUIDE Control Mechanical Throttle Mechanical Shift Electronic Throttle Electronic Shift KE-4 SERIES KE-5 SERIES KE-6 SERIES KE-7 SERIES FEATURES Designed for new installation or retrofit A new level of control performance for inboard, outboard or stern-drive engines; gas or diesel, 12V/24VDC common mode Up to 4 stations + 1 handheld Various color / finish control head options Neutral warm up function Complete self diagnostic system Adjustable shift / throttle settings Start in gear protection Single to quad engine capability Optional Hand Held Remote Control OPTIONAL FEATURES Idle control Audible alarm O/B style levers/ trim control Trolling outputs Display dimmer Handheld control System settings tool Integrated sync function Mechanical backup
4 KE-4 SERIES ELECTRONIC CONTROL KE-4 Series Mechanical throttle Mechanical shift Maximum work load Rated input voltages Current consumption Starting current - motor Operating Thrust 343N (35 kgf) 12V/24V DC common mode (DC 9V-31V) 7A Typical 16A Max (49N (5 Kgf) load) 147N (15 Kgf) Shift travel 40mm Max each (Fwd, Rev) - adjustable Operating environment Throttle travel 80mm Max - adjustable KE-5 SERIES ELECTRONIC CONTROL KE-5 Series Electronic throttle Electronic shift Supply Voltage 12V/24VDC common mode (DC 9V-31V) Current Consumption Throttle Output (Various settings available for each type) Control Unit - 10A Max Type 1 Current Type 2 Voltage Type 3 PWM Type 4 CAN (SAE J1939) Shift Output Solenoid Activation IVS Switches Normally open and Normally closed Operating environment
5 KE-6 SERIES ELECTRONIC CONTROL Electronic throttle Mechanical shift KE-6 Series Supply Voltage Current Consumption 12 VDC or 24 VDC Shift Actuator - 7A typical Throttle Output (Various settings available for each type) Shift Output IVS Switches Starting Current - motor Driving Current - Motor Type 1 Current Type 2 Voltage Type 3 PWM Type 4 CAN (SAE J1939)* Max 40mm travel each (forward & reverse) Normally open and Normally closed 16A Max at 49N(5Kgf) load 7A Typical at 49N(5Kgf) load * Feature expected to be available late 2015 Operating environment KE-7 SERIES ELECTRONIC CONTROL Mechanical throttle Electronic shift KE-7 Series Supply Voltage Current Consumption 12VDC or 24VDC 7A typical Starting Current - Motor Driving Current - Motor Maximum working load Operating Environment 16A Max at 49N(5Kgf) load 7A Max at 49N(5Kgf) load 343N (35Kg)
6 OPTIONAL ACCESSORIES Triple switch Quad switch Mechanical Troll Actuator or Single Actuator Idle control switch 2015 SeaStar Solutions All Rights Reserved. Document: SeaStar KE Controls Printed in the USA. www. Explore
HUMCOEngine Controls
Teleflex Selection Guide PRODUCT RANGE MECHANICAL CONTROLS SINGLE FUNCTION SERIES: CH4400 CH500 SR TWIN S ST/STB MJB CONTROL FEATURES START-IN-GEAR PROTECTION NEUTRAL INTERLOCK ENGINE WARM-UP PROVISION
upgradetoxtremecontrols
XTREME CONTROLS HAVE EVOLVED COMFORTABLE HANDLE & GRIP TACTILE SWITCH FUNCTIONS OPTIMIZED SYSTEM PERFORMANCE DESIGNED FOR HUMAN INTERACTION upgradetoxtremecontrols Single Top Mount The ergonomics and features
upgradetoxtremecontrols
XTREME CONTROLS HAVE EVOLVED COMFORTABLE HANDLE & GRIP TACTILE SWITCH FUNCTIONS OPTIMIZED SYSTEM PERFORMANCE DESIGNED FOR HUMAN INTERACTION upgradetoxtremecontrols Single Top Mount The ergonomics and features
i6800 ELECTRONIC ENGINE CONTROL
i6800 ELECTRONIC ENGINE CONTROL Suitable for engines with mechanical shift and throttle. Single or twin engine applications. Inboard, IO and Outboard. Supports up to three stations. Integrated trolling
DS UNIT APPLICATIONS OUTBOARD DS UNIT FEATURES. DS-Unit Gear Station selector unit
Page / 5 APPLICATIONS The dual function DS unit is great for dual station boats without a lot of room on the dash or if you wanted to use side mounted controls in two stations. Just put both levers in
GLENDINNING ONTROL QUICK REFERENCE GUIDE. (see Operations Manual for more detailed information)
GLENDINNING EL E C T NGINE C R O N I C ONTROL QUICK REFERENCE GUIDE (see Operations Manual for more detailed information) EEC QUICK REFERENCE GUIDE - TABLE OF CONTENTS SYSTEM STARTUP CRUISE MODE WARM UP
KE-4 Installation/Operation Instruction Manual FT033
KE-4 Installation/Operation Instruction Manual FT033 Electronic Control System Electronic Control System Thumb Tab Guide Trolling Module Handheld Control Engine Synchronization Trolling Module Handheld
SINGLE LEVER TOP MOUNT CONTROLS
SINGLE LEVER 20 Single lever / dual action control to operate both throttle and shift. Suitable for any type of boats with outboard, inboard or I/O power plants. SINGLE LEVER Enables easy and safe shifting
KE-6 ELECTRONIC CONTROL SYSTEM INSTRUCTION MANUAL
KE-6 ELECTRONIC CONTROL SYSTEM INSTRUCTION MANUAL TABLE OF CONTENTS INTRODUCTION-------------------------------------------------------------------------------------------------------------1 SAFETY PRECAUTIONS
Relax We re On Board. Complete Controls Catalog
Relax We re On Board Complete Controls Catalog Table of Contents Why Complete Controls? 2 Controls for Electronic Engines 3 Controls for Mechanical Engines 5 Component Dimensions 7 Control Head Options
SINGLE LEVER TOP MOUNT CONTROLS
SINGLE LEVER TOP MOUNT CONTROLS 20 Single lever / dual action control to operate both throttle and shift. Suitable for any type of boats with outboard, inboard or I/O power plants. SINGLE LEVER TOP MOUNT
ch2200 ch2300 mt3 osprey pro-trim single s twin s sl-3 INSTALLATION INSTRUCTIONS AND OWNERS MANUAL MECHANICAL DUAL ENGINE CONTROL CH7800P SERIES
MEMBER INSTALLATION INSTRUCTIONS AND OWNERS MANUAL Part # ISCH7800, Rev 1, 08/2013 www.seastarsolutions.com ch2200 ch2300 mt3 osprey pro-trim single s twin s sl-3 MANUFACTURED BY MARINE ACQUISITION INCORPORATED
G L E N D I N N I N G
G L E N D I N N I N G M A R I N E P R O D U C T S C O M P L E T E C O N T R O L S C A T A L O G R E L A X... W E R E O N B O A R D! T A B L E o f C O N T E N T S COMPLETE CONTROLS ELECTRONIC ENGINE CONTROLS
Operations Manual. Put the Pleasure Back into Boating! MANOP6000SEM01 Revision A
Operations Manual Put the Pleasure Back into Boating! MANOPSEM1 Revision A Notice to Boat Manufacturer, Installer, and Consumer Throughout this manual, warnings are used to alert the installer/operator
SINGLE LEVER TOP MOUNT CONTROLS
SINGLE LEVER 20 Single lever / dual action control to operate both throttle and shift. Suitable for any type of boats with outboard, inboard or I/O power plants. SINGLE LEVER Enables easy and safe shifting
HUMCOEngine Controls
St. Louis, MO 3137 Phone: 1-800-381-998 Teleflex Selection Guide PRODUCT RANGE MECHANICAL CONTROLS SINGLE FUNCTION SERIES: CH4400 CH500 SR TWIN S ST/STB MJB CONTROL FEATURES START-IN-GEAR PROTECTION NEUTRAL
Throttle and Shift by Wire
Throttle and Shift by Wire Full Electronic Engine Control is now available at your fingers tips Imagine you re planning your new ideal boat. It will have two, no, three large modern lowemission outboard
ch2200 ch2300 mt3 osprey pro-trim single s twin s sl-3 INSTALLATION INSTRUCTIONS AND OWNERS MANUAL SIDE AND TOP MOUNT ENGINE CONTROLS MODEL SL-3
MEMBER INSTALLATION INSTRUCTIONS AND OWNERS MANUAL Part # 212442, Rev 0, 08/2013 www.seastarsolutions.com ch2200 ch2300 mt3 osprey pro-trim single s twin s sl-3 MANUFACTURED BY MARINE ACQUISITION INCORPORATED
OPERATOR S GUIDE OPERATOR S GUIDE OPERATOR S GUIDE
ENGINE MONITORING SYSTEM For Caterpillar Electronically Controlled Marine Engines 3176 3196 3406E 3408C 3412C Introduction The Caterpillar Engine Monitoring System (EMS) is designed to display various
new high speed hydraulic actuator maximum engine tilt exceptional load capacity tough and sleek 2 setback increments FOR SERIOUS COMPETITORS
new high speed hydraulic actuator maximum engine tilt Superior sealing system Built and prepared for the toughest environment Heavy duty equipment exceptional load capacity tough and sleek 2 setback increments
Smart Actuator Installation & Operation Manual v3.8a. Complete Controls by Glendinning
Smart Actuator Installation & Operation Manual v3.8a Complete Controls by Glendinning WARNING: DISCONNECT SYSTEM S GROUND AND BONDING BEFORE ANY WELDING ACTIVITY ON BOARD VESSEL! SML-SMACT-MAN_v3.8A Glendinning
Marine Products. SL-3 Engine Controls. Owner s Manual
Marine Products SL-3 Engine Controls Owner s Manual This manual must be accessible to the owner/user of this Morse marine product. Includes installation, operation and maintenance instructions for your
ELECTRONIC ENGINE CONTROLS. (Model 6525)
ELECTRONIC ENGINE CONTROLS (Model 6525) INSTALLATION MANUAL February 2012 ELECTRONIC ENGINE CONTROLS INSTALLATION INSTRUCTIONS Table of Contents 1. GENERAL INFORMATION... 1-1 2. SYSTEM COMPONENTS... 2-1
THIS MANUAL DESCRIBES THE SMARTCRAFT GAUGE SYSTEMS AVAILABLE FOR YOUR BOAT
Systems Monitor Operation Manual THIS MANUAL DESCRIBES THE SMARTCRAFT GAUGE SYSTEMS AVAILABLE FOR YOUR BOAT 2004, Mercury Marine 90-895202 204 0 TABLE OF CONTENTS Legend..............................................
Table of Contents Operations Overview CONTROL HEAD OPERATIONS AND KEYPAD OPERATIONS AT-A-GLANCE...pg 1 System Startup EXPLAINS THE PROCESS OF
Complete Controls Operators Guide v0. Table of Contents Operations Overview CONTROL HEAD OPERATIONS AND KEYPAD OPERATIONS AT-A-GLANCE........................................pg System Startup EXPLAINS THE
Suzuki Instruments. Suzuki Genuine Instruments are. custom-designed to provide the. quality, reliability and value you. expect from Suzuki Products.
Suzuki Instruments Suzuki Genuine Instruments are custom-designed to provide the quality, reliability and value you expect from Suzuki Products. The wide selection allows you to accurately monitor a variety
OPERATION INSTRUCTIONS AND USER S MANUAL. Before you do it your way, please try it our way. i7700 Shift & Throttle System.
OPERATION INSTRUCTIONS 79 SEVENTY NINE ISO 9001 AND USER S MANUAL www.seastarsolutions.com i7700 Shift & Throttle System Before you do it your way, please try it our way 2017 SeaStar Solutions. All Rights
Seaductress. Specifications. Year Length Overall Beam Displacement... 52,000 lbs. Engine...Detroit 6 V 92 TA 550 HP
Seaductress Specifications Year... 1998 Length Overall...55 7 Beam... 17 6 Displacement... 52,000 lbs. Engine...Detroit 6 V 92 TA 550 HP Cruise Speed...18 knots (approximate) Fuel consumption...40 GPH
R.C. PLATH CO. Specialty Marine Hardware 2010 PLATH
R.C. PLATH CO. Specialty Marine Hardware 2010 PLATH Specialty Marine Hardware Portland, Oregon The finest accessories for adding safety, pleasure, and value to your craft. No craft too small or large for
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS For safety reasons, this kit must be installed by an authorized Evinrude/Johnson dealer. These installation instructions contain information that can help prevent personal injury
PRIME MOVER CONTROLS INC. MARINE PROPULSION CONTROLS. Series MPC-CP SYSTEM
PRODUCT BULLETIN SSB 001-550-300 MARINE PROPULSION S Series 550-300 MPC-CP SYSTEM TYPE MPC-CP SYSTEM FOR VESSELS WITH LABLE PITCH PROPELLERS Aesthetic design Ergonomic Versatile Economical Electronic engine
INSTALLATION, OPERATION AND TROUBLESHOOTING
INSTALLATION, OPERATION AND TROUBLESHOOTING MM9000 - CLEAR COMMAND USER MANUAL MARINE PROPULSION SYSTEMS COPYRIGHT Released by After Sales dept. Data subject to change without notice. We decline all responsibility
Livorsi DTS Controls Installation and Operation Manual
Livorsi DTS Controls Installation and Operation Manual for Triple/Quad Engine Digital Throttle and Shift Controls Revised JUNE 2017 LIT-CTL-DTS34 REV A ECO 28610 715 Center Street Grayslake IL 60030 P:
All-new Yamaha F25 is the Lightest 25-hp in the Industry. Period!
BOAT PROPELLER OUTBOARD BOAT PROPELLER OUTBOARD yamaha-motor.ca F 25 NEW EFFECTIVE APRIL 1, 2016 All-new Yamaha F25 is the Lightest 25-hp in the Industry. Period! The smallest of the Yamaha midrange models
ch2200 ch2300 mt3 osprey pro-trim single s twin s sl-3 INSTALLATION INSTRUCTIONS AND OWNERS MANUAL CH7500 CH1700 CH7600
MEMBER INSTALLATION INSTRUCTIONS AND OWNERS MANUAL Part # ISCH7500, Rev 5, 08/2013 www.seastarsolutions.com CH7500 ch2200 ch2300 mt3 osprey pro-trim single s twin s sl-3 MANUFACTURED BY MARINE ACQUISITION
Helm Master. New Introducing Yamaha's Fully Integrated Boat Control System for Yamaha outboard-powered Boats
yamaha-motor.ca Yamaha marine Group Boat ProPeller outboard Helm Master New Introducing Yamaha's Fully Integrated Boat Control System for Yamaha outboard-powered Boats Yamaha Helm Master offers the latest
MARINE.HONDA.COM.AU. BF250 (250hp Outboard)
MARINE.HONDA.COM.AU BF250 (250hp Outboard) The BF250 outboard engine takes Honda into the next power range. This flagship engine combines a new 3.6L, V6 EFI engine with the world s first direct air induction
ON-BOARD DIAGNOSTICS II SYSTEM. 5. Specified Data. Signal (V) Ignition SW ON (Engine OFF)
1. ENGINE CONTROL MODULE (ECM) I/O SIGNAL OBD0092A Crankshaft Camshaft Mass air flow Throttle Signal (+) 8 0 7 +7 Sensor output waveform Signal ( ) 29 0 0 Shield 54 0 0 Signal (+) 7 0 7 +7 Sensor output
BF HONDA BF60 EFI AUSTRALIAN PRODUCT GUIDE. (information correct as at 1 May 2009)
BF60 2009 HONDA BF60 EFI AUSTRALIAN PRODUCT GUIDE (information correct as at 1 May 2009) HONDA RELEASES BRAND NEW BF60 OUTBOARD Honda s brand new BF60 four-stroke EFI outboard engine expands the premium
OFFSHORE VOYAGER 33' - 35' 10' 6" BEAM
33' - 35' 10' 6" BEAM LIFE IS BETTER IN A NORTH RIVER! 33' - 35' 10' 6" BEAM AVAILABLE MODELS Pilot House (Full V-berth & Alaskan Bulkhead) Walk Around (Storage cuddy & Alaskan bulkhead) AVAILABLE LENGTHS
BINNACLE MOUNT REMOTE CONTROL INSTALLATION AND USER S GUIDE
BINNACLE MOUNT REMOTE CONTROL INSTALLATION AND USER S GUIDE APPLICATION Use for Evinrude E-TEC binnacle mount remote control assemblies designed for Evinrude and Johnson outboards. SAFETY INFORMATION For
BF2.3 MARINE.HONDA.COM.AU
BF2.3 MARINE.HONDA.COM.AU Reliable and quiet, the ergonomic carry handle of the lightweight BF2.3 allows the Honda experience to be enjoyed anywhere, anytime! INTRODUCTION PORTABLE POWER Not only does
TrimSync Installation & Operating Instructions
TrimSync Installation & Operating Instructions Mounting the Device The unit should be mounted in a dry area away from sources of heat. Mounting the unit near the trim pumps will reduce wiring complications.
TR-1 Gold Throttle Actuator Installation Instructions
TR-1 Gold Throttle Actuator Installation Instructions Honda 8 HP 1987-2000 PN 906-1160-00 Parts: Kit Number: 120-0052-01 8 1 6 7 4 5 2 3 ITEM PART NUMBER DESCRIPTION QTY 1 130-0029-01 Throttle Actuator
MD PRODUCT BULLETIN V8 500 VGT. Turbocharged Diesel Marine Propulsion System PRODUCT BULLETIN.
V8 500 VGT Turbocharged Diesel Marine Propulsion System PRODUCT BULLETIN 1 V8 500 VGT Axis Drive INTRODUCTION Caudwell Marine Axis Drives are the world s most technologically advanced marine propulsion
MARINE.HONDA.COM.AU. BF10 (10hp Outboard)
MARINE.HONDA.COM.AU BF10 (10hp Outboard) Delivering dependable portable performance, the BF10 is ideal for inflatable boats, small aluminium dinghies and sailing boats. INTRODUCTION COMPACT AND POWERFUL
Objectives Topics Resources & Notes GAIN ATTENTION Review homework from chapter 6 Slide 1 OBJECTIVE
7 Outboard Engines and Stern Drives 67 COURSE LESSON TITLE PRESENTATION TIME PRESENTATION METHOD MATERIALS REQUIRED Chapter 7 Outboard Engines and Drives, and Stern Drives 2 hours Participative Lecture
2006, 18' TRACKER MARINE NITRO 482 DC TRACKER
2006, 18' TRACKER MARINE NITRO 482 DC TRACKER Builder: TRACKER Year Built: 2006 Model: Deck Boat Price: $15,900 USD Off the market Location: United States LOA: 18' 0" (5.49m) Beam: 7' 2" (2.18m) Max Draft:
EEC3 Electronic Engine Controls by Glendinning. Installation & Operation Manual v4.0
EEC3 Electronic Engine Controls by Glendinning Installation & Operation Manual v4.0 EEC3M4 Glendinning Marine Products, Inc. 740 Century Circle Conway, SC 29526 (843) 399-6146 Fax: (843) 399-5005 www.glendinningprods.com
OPERATION AT-2. Clutch No.3 (C 3 ) Clutch No.1 (C 1 ) One-way Clutch
AT2 OPERATION AT13K01 Clutch No.3 (C 3 ) Clutch No.1 (C 1 ) Clutch No.2 (C 2 ) Oneway Clutch No.2 (F 2 ) Brake No.3 (B 3 ) Oneway Clutch No.1 (F 1 ) Brake No.1 (B 1 ) Brake No.2 (B 2 ) Oneway Clutch No.3
INSTRUCTION MANUAL ENGINE IDLER MODEL # YEAR WARRANTY KUSSMAUL ELECTRONICS CO., INC.
10-19-96 INSTRUCTION MANUAL ENGINE IDLER MODULE PART OF A HIGH IDLE SYSTEM ENGINE IDLER MODEL #091-84-005 3 YEAR WARRANTY ELECTRONICS CO., INC. 170 CHERRY AVE., WEST SAYVILLE, N.Y. 11796 TEL: in NY 631-567-0314
IMCO SCX SERIES INFORMATION, OPERATION & MAINTAINANCE
IMCO SCX SERIES INFORMATION, OPERATION & MAINTAINANCE Warning! Warning! Warning! Danger! Warning! 1. SCX & SCX4 Drives will not fit on a standard gimbal helmet, IMCO HELMET: #05-8025 Black or #05-8027
MARINE.HONDA.COM.AU. BF8 (8hp Outboard)
MARINE.HONDA.COM.AU BF8 (8hp Outboard) Reliable and economical power in a lightweight package, the BF8 is built to deliver complete satisfaction when you're on the water. INTRODUCTION FREEDOM ON THE WATER
New Model Information
Distribute to: Sales div. Service div. Parts div. Accounting div. No.06-002 New Model Information The next generation of direct fuel injection outboard motor equipped with a 32 bit ECU (Engine Control
Troubleshooting the Transmission Hydraulic System
Testing and Adjusting IT28F INTEGRATED TOOLCARRIER POWER TRAIN Testing And Adjusting Introduction Reference: For Specifications with illustrations, refer to SENR5974, IT28F Integrated Toolcarrier Power
Analogue Electronic Throttle Controls for SISU DIESEL Engines
Electronic Throttle Controls for Engines Technical description: Page 2 of 10 The Electronic Throttle Controls have been developed to match the signal required to operate the Engine Management System, and
POWERHEAD REPLACEMENT KIT INSTALLATION INSTRUCTIONS
APPLICATION POWERHEAD REPLACEMENT KIT INSTALLATION INSTRUCTIONS Use this instruction sheet when installing powerhead replacement kits on Evinrude E-TEC 60 V outboards, 5 00 Hp. DO NOT install on any other
Analogue Electronic Throttle Controls for DETROIT DIESEL Engines
Electronic Throttle Controls for Engines Technical description: Page 2 of The Electronic Throttle Controls have been developed to match the signal required to operate DDEC III, DDEC IV, DDEC V and DDEC
Product Information Page
PROGRAMMING GC31 PRESSURE TRANSMITTER TO MONITOR AND CONTROL A HYDRAULIC PRESS PIP #: TR-PI-104 The GC31 differential pressure transmitter is compact, flexible and supports numerous pressure applications
A 1 SERVICE SPECIFICATIONS
A1 A2 Clutch CLUTCH Specifications Pedal height (from asphalt sheet) Release point (from pedal stroke end position) Push rod play at pedal top Pedal freeplay Disc rivet head depth Disc runout Diaphragm
ENGINE ADJUSTMENTS. Remote Controls
ENGINE ADJUSTMENTS Remote Control Wire Travel The remote control wire should measure 2.25 (54 mm) when extended outside the casing (Figure 2). After installation, the travel of the remote control wire
INSTALLATION INSTRUCTIONS AND OWNER'S MANUAL. Before you do it your way, please try it our way. Hydraulic Jackplates.
INSTALLATION INSTRUCTIONS 90 NINETY ISO 9001 AND OWNER'S MANUAL www.seastarsolutions.com Hydraulic Jackplates Before you do it your way, please try it our way To the Installer and End User (Owner) Thank
CXO300. Technical Specification CXO300. coxmarine.com
TYPE YEAR 2018 DIESEL OUTBOARD ENGINE Technical data Engine designation Crankshaft power, kw (hp) 252 (338) Propeller shaft power, kw (hp) 224 (300) Engine propping speed, rpm 3700-4000 Displacement, L
CM80i autopilot. CM80i intelligence without rudder feedback. coursemaster autopilots
cm80i CM80i autopilot. CM80i intelligence without rudder feedback The CM80i breaks new ground in intelligent autopilots. The new features of this system make it both easier to install and very easy to
Analogue Electronic Throttle Controls for DEUTZ Engines
Electronic Throttle Controls for Engines Technical description: Page 2 of The Electronic Throttle Controls have been developed to match the signal required to operate the EMR2 Engine Management System.
Caterpillar Electronic Technician 2012C v1.0 Product Status Report. 12-Mar :40 PM
Page 1 of 11 Caterpillar Electronic Technician 2012C v1.0 Product Status Report 12-Mar-2013 1:40 PM Product Status Report Comments Monitor ECM Part Number 2395025-09 2897B667HL Software Group Part Number
small hp fourstroke outboard 2.5 HP 3.5 HP 4 HP 5 HP 6 HP 8 HP 9.9 HP 9.9 HP BigFoot 9.9 HP Pro Kicker 15 HP 15 HP ProKicker 20 HP
small hp fourstroke outboard 2.5 HP 3.5 HP 4 HP 5 HP 6 HP 8 HP 9.9 HP 9.9 HP BigFoot 9.9 HP Pro Kicker 15 HP 15 HP ProKicker 20 HP 25 HP EFI 30 HP EFI 54 46 55 2.5hp 2.5hp S P E C I F I C A T I O N S K
Analogue Electronic Throttle Controls for DEUTZ EMR2 & EMR3 Engines
Electronic Throttle Controls for EMR2 & EMR3 Engines Technical description: Page 2 of 11 The Electronic Throttle Controls have been developed to match the signal required to operate the EMR2 & EMR3 Engine
e -Stroke e-s 3 / GEN 3 Tractor / Truck / Bus Parts List
e -Stroke e-s 3 / GEN 3 Tractor / Truck / Bus Parts List e-s 3 / GEN 3 Tractor / Truck / Bus CCMs Description Part # System Type Vehicle Type Axle No CCM 8291100 e-s 3 / GEN 3 Truck / Bus 2 CCM 8291101
1997 Volkswagen Jetta GT AUTOMATIC TRANSMISSIONS' 'Servicing - Volkswagen AUTOMATIC TRANSMISSIONS. Servicing - Volkswagen
1997-98 AUTOMATIC TRANSMISSIONS Servicing - Volkswagen APPLICATION TRANSAXLE APPLICATION Application Transaxle Model 1997 Golf, GTI, Jetta & Passat 01M 1998 Jetta, Golf, GTI 01M LUBRICATION CHECKING FLUID
STEYR MONOBLOCK DIESEL MARINE ENGINE SERIES
STEYR MONOBLOCK DIESEL MARINE ENGINE SERIES WHY TO CHOOSE The STEYR MONOBLOCK engine family consists of several design solutions which are the key for highest power density, reliability and safety in operation
The Straight Word. Cessna 337 Skymaster 337C Series. The front engine should always be started first as the battery-to-starter cable is shorter.
The Straight Word Cessna 337 Skymaster 337C Series I. FLIGHT PROCEDURES: COCKPIT PREPARATION Heading Bug OBS Indicator Altimeters Trims Parking Brake Set QFU Set Course Set QNH Set for Takeoff Apply ENGINE
J115MLCNB 1982 : CARBURETOR [1/18] Page 1 of 43
![J115MLCNB 1982 : CARBURETOR [1/18] Page 1 of 43](/thumbs/94/118301039.jpg "J115MLCNB 1982 : CARBURETOR [1/18] Page 1 of 43")
J115MLCNB 1982 : CARBURETOR [1/18] Page 1 of 43 J115MLCNB 1982 : CARBURETOR [1/18] 0392596 0392596 1 CARB ASSY., Upper, 90 0392597 0392597 1 CARB ASSY., Lower, 90 0392600 0392600 1 CARB ASSY., Upper, 115
DI 244 DIAGNOSTICS AUTOMATIC TRANSMISSION DIB30 01 PRE CHECK
DI244 DIAGNOSTICS PRECHECK DIB3001 1. DIAGNOSIS SYSTEM (a) Description When troubleshooting OBD II vehicles, the only difference from the usual troubleshooting procedure is that you connect to the vehicle
The Straight Word. Cessna 337 Super Skymaster 337G & T337G Series, and corresponding Reims Aviation models
The Straight Word Cessna 337 Super Skymaster 337G & T337G Series, and corresponding Reims Aviation models I. FLIGHT PROCEDURES: COCKPIT PREPARATION Heading Bug OBS Indicator Altimeters Trims Parking Brake
4 speedometer Easy to read 4 Speedometer features include lighted dial, contoured pointer and fog resistant glass lens. *Requires Tubing
instruments 99105-80000 4 tachometer / without monitor 99105-80002 99105-80001 4 tachometer / monitor 4 tachometer 7,000 max R.P.M. Tachs are available with or without 4-Stroke monitor functions. Monitor
PREWIRED SURFACE MOUNT REMOTE CONTROL INSTALLATION INSTRUCTIONS
PREWIRED SURFACE MOUNT REMOTE CONTROL INSTALLATION INSTRUCTIONS APPLICATION This surface mount remote control assembly is designed for use on Evinrude and Johnson outboards. SAFETY INFORMATION For safety
Thrust Reverser System
Thrust Reverser System LEFT FEED BUS LEFT CB PANEL LH T/R 3,000 PSI ISOLATION VALVE SPRING 200 PSI PRESSURE SITCH SOLENOID CONTROL VALVE ( POSITION SHON) Thrust Reverser System 7.5A XOVER RIGHT FEED BUS
TABLE OF CONTENTS PREFACE... 3
TABLE OF CONTENTS PREFACE.......................................................................... 3 EVINRUDE E-TEC ENGINES............................................. 5 40, 50, 60 EVINRUDE E-TEC...........................................................
ch2200 ch2300 mt3 osprey pro-trim single s twin s sl-3 INSTALLATION INSTRUCTIONS AND OWNERS MANUAL
MEMBER INSTALLATION INSTRUCTIONS AND OWNERS MANUAL Part # IS-CH2200/2300, Rev, 08/203 www.seastarsolutions.com ch2200 ch2300 mt3 osprey pro-trim single s twin s sl-3 MANUFACTURED BY MARINE ACQUISITION
TROUBLE SHOOTING > SYMPTOM DIAGNOSIS > SOME OR ALL SHIFTS MISSING TROUBLE SHOOTING > SYMPTOM DIAGNOSIS > NO 1-2, 2-3 OR 3-4 UPSHIFT (AUTOMATIC)
AUTOMATIC TRANSMISSION - DIAGNOSIS - E4OD A/T TROUBLE SHOOTING 1997 Ford Pickup 7.3L Eng F350 Question: overdrive off light is on steady TROUBLE SHOOTING > SYMPTOM DIAGNOSIS Question: Repeat OD planetary
electric outboards & powertrains
electric outboards & powertrains PRODUCTS LINE a solution for any request TARGET a solution for everyone OUTBOARDS POD New horizons to develop a business that focuses on respect for man and the environment.
REMOTE CONTROL CONVERSION KIT, P/N INSTALLATION INSTRUCTIONS
REMOTE CONTROL CONVERSION KIT, P/N 5036662 INSTALLATION INSTRUCTIONS APPLICATION This kit is designed for use on 2005 (SO) and newer Johnson 9.9 and 5 HP (302 cc) 4-Stroke outboards. DO NOT install on
MARINE.HONDA.COM.AU. BF20 (20hp Outboard)
MARINE.HONDA.COM.AU BF20 (20hp Outboard) The BF20 delivers unrivalled innovation to the portable range. It s a powerful, efficient and clean operator! INTRODUCTION RELIABILITY IN A COMPACT DESIGN With
Doosan Infracore DL220 TECHNICAL DATA
Doosan Infracore Construction Equipment DL220 TECHNICAL DATA GENERAL SPECIFICATIONS ITEMS UNIT STANDARD MODEL ea. Doosan DL06 NUMBER OF CYLINDERS ea. 6 RATED FLYWHEEL POWER hp / rpm 148 / 2,200 (GROSS)
PROCEDURE NAME: DEPT: 030 REVISION LEVEL: A DATE EFFECTIVE: 11/13/07 DAF# 00396
Original Release: 10/14/09 Williams Customer Specification Features: 14 ± 2 Angular Rotation, Fore & Aft FMVSS 124 and 302 compliant -40 C to + 85 C Operation + 5V Operation Electronics IP67 Sealed Dual
RE5R05A. Technical Bulletin # Computer Diagnostics
Transmission: Subject: Application: Issue Date: Computer Diagnostics Nissan, Infinity July, 2008 Computer Diagnostics There are two separate controller systems that are used for the transmission applications.
BRAKE FLUID BLEEDING. 1. PREPARE FOR BLEEDING a. Move the shift lever to the P position and apply the parking brake.
BRAKE FLUID BLEEDING CAUTION: Bleeding without the intelligent tester may result in the air not being completely bled. As this can result in an accident, be sure to use the intelligent tester for air bleeding.
1 The speedometer displays the speed of machine in mph and km/h Emergency warning lamp Right turning pilot lamp Hyd oil temp gauge Fuel gauge
. CLUSTER ) STRUCTURE The cluster consists of gauges, lamps and LCD as shown below, to warn the operator in case of abnormal machine operation or conditions for the appropriate operation and inspection.
QX Series. Electric Counterbalanced Forklifts. 80 Volt AC-Powered 4,000-6,000 lbs. Capacities l Pneumatic Tire
R QX Series Electric Counterbalanced Forklifts 80 Volt AC-Powered 4,000-6,000 lbs. Capacities l Pneumatic Tire S P E C I F I C A T I O N S MAIN TRUCK SPECIFICATIONS CHARACTERISTICS DIMENSIONS PERFORMANCE
DTC No. DTC Detection Condition Trouble Area
EINE (5VZFE) DI205 DI8YZ02 DTC P0171 System too Lean (Fuel Trim) DTC P0172 System too Rich (Fuel Trim) CIRCUIT DESCRIPTION Fuel trim is related to the feedback compensation value, not to the basic injection
Warranty Flat Rate Manual
Warranty Flat Rate Manual Evinrude E-TEC G2 200, 225, 250, 300 HP, 74 V6 (3.4 L) 12/07/2015 2014 Bombardier Recreational Products Inc. All rights reserved., TM and the BRP logo are trademarks of Bombardier
MODEL FIXED MOTOR BRACKET
MODEL 55-0027 FIXED MOTOR BRACKET INSTALLATION MANUAL REV 12/15 CUSTOMER MUST RECEIVE THIS MANUAL AFTER INSTALLATION INSTALLATION PROCEDURES Congratulations, you have just purchased one of the finest outboard
TROUBLE DIAGNOSIS. ECM Harness Connector Terminal Layout. ECM Terminals and Reference Value EC-107
ECM Harness Connector Terminal Layout UBS00K1I A EC C ECM Terminals and Reference Value PREPARATION 1. ECM is located behind the glove box. For this inspection, remove glove box. 2. Remove ECM harness
Automation systems for swing gates hydraulic
70 Automation systems for swing gates hydraulic A wide range of operators designed to respond to the multiple needs of swing gates. BFT automation systems are suitable for any type of gate - heavy, light,
Diagnostic Trouble Codes (continued) GM Specific Codes
85 GM Specific Codes P11XX Fuel and Air Metering P1106 MAP Sensor Circuit Intermittent High Voltage P1107 MAP Sensor Circuit Intermittent Low Voltage P1108 BARO to MAP Signal Comparison Too High P1111
REMOTE CONTROL CONVERSION KIT, P/N INSTALLATION INSTRUCTIONS
REMOTE CONTROL CONVERSION KIT, P/N 5035779 INSTALLATION INSTRUCTIONS APPLICATION This kit is designed for use on 003 (ST) and newer Johnson 4, 5, 6 HP (38 cc) 4-Stroke outboards. DO NOT install on any
ADVANCED ELECTRIC INBOARD ENGINES THE COMPLETE KIT TO MAKE YOUR BOAT ELECTRIC
ADVANCED ELECTRIC S DIRECT DRIVE OR GEARED DRIVE Why install the advanced high tech induction motors when you can get cheap DC motors for less money? Induction motors do not contain permanent magnets or
The Admiral Series comes with the standard 2 year warranty for commercial and leisure use.
Admiral Series NON-FEEDBACK The HyDrive Admiral Series represents the pinnacle in outboard steering systems providing the highest corrosion resistance and strength of any steering system in its class.
OWNER S MANUAL M 40D2 50D2 MW 50D2. OB No B
OWNER S MANUAL M 40D2 0D2 MW 0D2 OB No.003-11038-B ! READ THIS MANUAL BEFORE USING THE OUTBOARD MOTOR. FAILURE TO FOLLOW THE INSTRUCTIONS AND SAFETY PRECAUTIONS IN THIS MANUAL CAN RESULT IN SERIOUS INJURY