Service & Maintenance XTA-400 Basic Loader Parts

Transcription

1 XTA-00 Basic Loader Parts 0 BASIC LOADER TOWER REPLACEMENT PARTS XBT-AS TOWER XAT-AS LATCH XBT-0AS STAND TUBE XBT- CLAMP WASHER XAF- LINKAGE PIN HHS00 /" X " BOLT HHS000 /" X /" BOLT HTN0 /" LOCK NUT RLP0000 /" ROLL PIN 0 ZER0 GREASE FITTING. WESTENDORFMFG PWB000 WESTENDORF MFG CO., INC. PH: () - FAX: () -0 sales@westendorfmfg.com

2 XTA-00 Basic Loader Parts 0 BASIC LOADER FRAME REPLACEMENT PARTS XBF-AS FRAME NAF-AS LINKAGE CONNECTOR XBF-0AS OUTSIDE BUCKET LINKAGE XBF-AS INSIDE BUCKET LINKAGE XAF-AS LINKAGE PIN LMF-AS ROUND HEAD PIN LW- INSERT BUSHING XAF- LINKAGE PIN DRP0000 DOUBLE ROLL PIN 0 LAC-- ROTATIONAL BUCKET INDICATOR RLP0000 /" ROLL PIN NAF- PIN HEAD ZER0 GREASE FITTING NOTE: See next page for LAC-- & Optional Height Indicator parts breakdown. WESTENDORFMFG PWB000 WESTENDORF MFG. CO., INC. PH:() - FAX: () -0 sales@westendorfmfg.com

3 XTA-00 Rotational Indicators 0 ROTATIONAL BUCKET INDICATOR LAC-- REF # PART # DESCRIPTION QTY GRD-0AS BUCKET INDICATOR GRD-AS POINTER GRD-0 GAUGE ROD HOLDER GRD-0 GAUGE ROD DE-GRD " RULER CTK0000 /" X " COTTER KEY HHS000 /" X /" BOLT HTN0 /" LOCK NUT AHS000 /" X /" ALLEN HEAD SET SCREW 0 SR-C0 SNAP RING NOTE: *Order LAC-- when ordering a complete Rotational Bucket Indicator Kit. ROTATIONAL HEIGHT INDICATOR LAC--0 GRD-AS HEIGHT INDICATOR GRD- POINTER BUS-0 BUSHING BUS-0 BUSHING BUS-0 INSERT BUSHING LM- NYLON BUSHING DE-GRD " RULER HHS00 /" X /" BOLT CBF00 /" X /" CARRIAGE BOLT 0 HTN0 /" LOCK NUT SHS00 /" X " SET SCREW NOTE: *Order LAC--0 when ordering a complete Rotational Height Indicator Kit. NOTE: The Rotational Height Indicator is optional for the XTA WESTENDORFMFG PWB000 WESTENDORF MFG. CO., INC. PH: () - FAX: () -0 sales@westendorfmfg.com

4 XTA-00 Hydraulic Lines 0 0 HYDRAULIC LINES PF-FFC FEMALE CONNECTOR PF-FSBT SWIVEL TEE PF-FSE SWIVEL ELBOW OH- OIL LINE PROTECTOR OH- OIL LINE HOLDER OH- HOSE HOLDER OH- HOSE HOLDER OH- OIL LINE HOLDER OH- OIL LINE HOLDER 0 OH- OIL LINE HOLDER HTN0 /" LOCK NUT H000-FF /" X 0" HOSE OLT-00 OIL LINE OLT-0 OIL LINE OLT-0 OIL LINE OLT-0 OIL LINE OLT-0 OIL LINE OLT-0 OIL LINE OLT-0 OIL LINE 0 OLT-0 OIL LINE. WESTENDORFMFG PWB000 WESTENDORF MFG. CO., INC. PH: () - FAX: () -0 sales@westendorfmfg.com

5 XTA-00 Lift Cylinder STEPS TO REPAIR CYLINDER ) At the ram end of the cylinder barrel, remove the spiral retaining ring from the top of the gland. NOTE: The G-E gland does not use the spiral retaining ring. ) Gently drive the gland into the barrel using a brass or nonmarring punch until the round retaining ring is visible. ) Remove the round retaining ring using a pair of long nose pliers. Remove the ram assembly (ram, gland, and piston) from the barrel. ) Notice the direction they're pointing so they can be properly re-assembled. ) Remove the jam nut and/or hex nut from the end of the ram. ) Remove the old seals and rings and replace them with the new seals and rings. (Seal kits are packaged for several different cylinders. You may have extra parts) ) Clean cylinder with cleaner and a clean lint free cloth. ) Lubricate the seals and rings to aid assembly. ) Assemble the cylinder by reversing the order. CYLINDER REPAIR TIPS When disassembling cylinders, keep the parts in correct orientation. Remove parts in sequence. Note the direction of the piston and gland. Lay out old seals and parts as they are removed. Assemble cylinder in proper order; lubricate to aid assembly. LIFT CYLINDER REPLACEMENT PARTS L- LIFT CYLINDER L-0 BARREL L-0 RAM G-L GLAND P-B PISTON HJN " JAM NUT HFN " NUT LW- INSERT BUSHING #CK REPAIR KIT * NOTE: * Repair kit contains parts to repair one cylinder WESTENDORFMFG PWB000 WESTENDORF MFG. CO., INC. PH: () - FAX: () -0 sales@westendorfmfg.com

6 XTA-00 Bucket Cylinder STEPS TO REPAIR CYLINDER ) At the ram end of the cylinder barrel, remove the spiral retaining ring from the top of the gland. NOTE: The G-E gland does not use the spiral retaining ring. ) Gently drive the gland into the barrel using a brass or nonmarring punch until the round retaining ring is visible. ) Remove the round retaining ring using a pair of long nose pliers. Remove the ram assembly (ram, gland, and piston) from the barrel. ) Notice the direction they're pointing so they can be properly re-assembled. ) Remove the jam nut and/or hex nut from the end of the ram. ) Remove the old seals and rings and replace them with the new seals and rings. (Seal kits are packaged for several different cylinders. You may have extra parts) ) Clean cylinder with cleaner and a clean lint free cloth. ) Lubricate the seals and rings to aid assembly. ) Assemble the cylinder by reversing the order. CYLINDER REPAIR TIPS When disassembling cylinders, keep the parts in correct orientation. Remove parts in sequence. Note the direction of the piston and gland. Lay out old seals and parts as they are removed. Assemble cylinder in proper order; lubricate to aid assembly. BUCKET CYLINDER REPLACEMENT PARTS B- BUCKET CYLINDER B-0 BARREL B-0 RAM G-L GLAND P-B PISTON HFN " NUT ZER0 GREASE FITTING BAND- METAL BAND OLT- OIL LINE 0 #CK REPAIR KIT * NOTE: * Repair kit contains parts to repair one cylinder. WESTENDORFMFG PWB000 WESTENDORF MFG. CO., INC. PH: () - FAX: () -0 sales@westendorfmfg.com

7 XTA-00 Optional Lift Cylinder STEPS TO REPAIR CYLINDER ) At the ram end of the cylinder barrel, remove the spiral retaining ring from the top of the gland. NOTE: The G-E gland does not use the spiral retaining ring. ) Gently drive the gland into the barrel using a brass or nonmarring punch until the round retaining ring is visible. ) Remove the round retaining ring using a pair of long nose pliers. Remove the ram assembly (ram, gland, and piston) from the barrel. ) Notice the direction they're pointing so they can be properly re-assembled. ) Remove the jam nut and/or hex nut from the end of the ram. ) Remove the old seals and rings and replace them with the new seals and rings. (Seal kits are packaged for several different cylinders. You may have extra parts) ) Clean cylinder with cleaner and a clean lint free cloth. ) Lubricate the seals and rings to aid assembly. ) Assemble the cylinder by reversing the order. CYLINDER REPAIR TIPS When disassembling cylinders, keep the parts in correct orientation. Remove parts in sequence. Note the direction of the piston and gland. Lay out old seals and parts as they are removed. Assemble cylinder in proper order; lubricate to aid assembly. OPTIONAL LIFT CYLINDER REPLACEMENT PARTS H- LIFT CYLINDER H-0 BARREL L-0 RAM G-P GLAND P-I PISTION HJN " JAM NUT HFN " NUT LW- INSERT BUSHING #CK REPAIR KIT * NOTE: * Repair kit contains parts to repair one cylinder. WESTENDORFMFG PWB000 WESTENDORF MFG. CO., INC. PH: () - FAX: () -0 sales@westendorfmfg.com

8 XTA-00 Buckets and Couplers BUCKET Q " BUCKET 0Q 0" BUCKET Q " BUCKET SB- " BLADE LB- 0" BLADE CB- " BLADE SB- SIDE BLADE QC-AS WELD ON ADAPTER JB- GUIDE (OPTIONAL) NOTE: *Check width of the bucket and use the part number that matches. If your size is not shown, contact Westendorf Mfg. Co. SNAP-ATTACH COUPLER (C-B) 0 QC-0COM MALE COUPLER QC-0AS MALE COUPLER HHS00 /" X " BOLT QC-AS LATCH HANDLE HTN0 /" LOCK NUT QC- LATCH QC- SPRING QC- BOTTOM LATCH PIN XAF-AS LINKAGE PIN 0 LF- LINKAGE PIN DRP0000 DOUBLE ROLL PIN DRP0000 DOUBLE ROLL PIN RLP00000 /" X /" ROLL PIN ZER0 GREASE FITTING NOTE: Qty. shows the number of parts you will receive if you place an order using these part numbers. C-B is two (QC-0COM) couplers. COSMETICS DEC-00 DECAL KIT V-0-A RED SPRAY PAINT V--A BLACK SPRAY PAINT REF # PART # DESCRIPTION QTY V--P PINT BLACK PAINT V--Q QUART BLACK PAINT V--G GALLON BLACK PAINT NOTE: Warning decals are available at no charge. If they become damaged or missing, order part numbers DE-CW. WESTENDORFMFG PWB000 WESTENDORF MFG. CO., INC. PH: () - FAX: () -0 sales@westendorfmfg.com