Type EK 9F61 Series Medium Voltage Fuse Holders & Clips
|
|
- Darren Richardson
- 5 years ago
- Views:
Transcription
1 Type EK 961 Series Medium Voltage use Holders & lips USE LOKS & HOLERS USE SUPPORTS, USE ISONNET SWITHES, AN AESSORIES ROM 2.4KV TO 38KV use supports, non-disconnecting, are used primarily in potential transformer circuits, or where there is some other disconnecting or isolating device in series with the fuse in the circuit. isconnecting switch devices have the additional feature of serving to isolate the equipment they protect. It should be noted that disconnecting switches are not load-breaking devices, therefore, the circuit must be open prior to the fuse disconnection. Select either a fuse support or a disconnecting switch for each fuse. use supports and disconnecting switches include live parts for both ends. oth fuse supports and fuse disconnect switches can be mounted vertically or horizontally. The type EK are used for indoor installations while the type EKO are used outdoors. Indoor: use supports:...ek-1 use disconnect switches:... EK-3 The letter suffix following the (-1) or the (-3) shows the fuse size. When selecting a mounting for a current-limiting fuse, it is necessary that the clip centers and size agree with the fuse selected. Outdoor: use supports:...eko-1 use disconnect switches:.... EKO-3 or detailed information regarding these fuse supports and disconnecting switches such as storage, mounting and maintenance, please refer to INST-EK39196 available on our website at ep.mersen.com or ask your sales representative for a hard copy. use Size EE errule iameter 1-9/16 inches 2 inches 3inches two-3 inch in parrallel four-3 inch in parrallel two-4 inch in parrallel USE SUPPORT - EK-1 INOOR EK-1 EK-1 EK-1 EK-1 EK-1EE EK-1 Refer to drawings for specific dimensions Mersen. All rights reserved. Mersen reserves the right to change, update, EP.MERSEN.OM or correct, without notice, any information contained in this datasheet. 45
2 TYPE EK 961 SERIES Medium Voltage use Holders & lips USE LOKS & HOLERS USE SUPPORT - EK-1 INOOR atalog No. Max. kv errule Size/ iam. lip enters (Live Parts) (lips) Insulator Rating - lass/nema Nominal Sys. (kv) Insulator Rating - IL (kv) 961A /5.5 / NW WW A AG / NW WW A AG / NW WW A AJ / NW WW A AA / NW WW A A / NW WW A AEG / NW WW A AGG / NW WW A AGJ / NW WW A AHM / NW WW A AA / NW WW A AE /5.5 / NW WW A AEG / NW WW A AGG / NW WW A AGJ / NW WW A AHM / NW WW A AA / NW A AE /5.5 / NW A AEG / NW A AGG / NW A AGJ / NW A AHM / AWW A A EE/ NW A AG EE/ NW A AJ EE/ NW A AHG or olted-end uses refer to drawings AK or olted-end uses refer to drawings. 60 lass/nema Tech Ref. 46 EP.MERSEN.OM
3 USE LOKS & HOLERS TYPE EK 961 SERIES Medium Voltage use Holders & lips ISONNET SWITH - EK-3 INOOR EK-3 EK-3 EK-3 atalog No. Max. kv errule Size/ iam. lip enters (Live Parts) (lips) Nominal Sys. (kv) IL (kv) lass/nema Tech Ref. 961AA / NW WW A A / NW WW A AEG / NW WW A AGG / NW WW A AGJ / NW WW A AHM / NW WW A AA / NW WW A AE /5.5 / NW WW A AEG / NW WW A AGG / NW WW A AGJ / NW WW A AHM / NW WW A AA / NW A AE /5.5 / NW A AEG / NW A AGG / NW A AGJ / NW A AHM / NW A-20 Refer to drawings for specific dimensions. EP.MERSEN.OM 47
4 TYPE EK 961 SERIES Medium Voltage use Holders & lips USE LOKS & HOLERS USE SUPPORT - EKO-1 OUTOOR EKO-1 EKO-1 EKO-1 EKO-1 atalog No. Max. kv errule Size/iam. lip enters (Live Parts) (lips) Nominal Sys. (kv) IL (kv) lass/nema Tech Ref. 961E /5.5/8.25 / NW WW GL / NW WW HM / NW WW E /5.5/8.25 / NW WW GL / NW WW HM / NW WW JN / NW WW E /5.5/8.25 / AWW GL / AWW HM / AWW JN / AWW K or olted-end uses refer to drawings. Refer to drawings for specific dimensions. 48 EP.MERSEN.OM
5 USE LOKS & HOLERS TYPE EK 961 SERIES Medium Voltage use Holders & lips ISONNET SWITH - EKO-3 OUTOOR EKO-3 EKO-3 Open Position EKO-3 atalog No. Max. kv errule Size/iam. lip enters (Live Parts) (lips) Nominal Sys. (kv) IL (kv) lass/ NEMA Tech Ref. 961E /5.5/8.25 / NW WW GL / NW WW GN / NW WW HM / NW WW E /5.5/8.25 / NW WW GL / NW WW HM / NW WW JN / NW WW E /5.5/8.25 / NW GL / NW HM / NW JN / NW Refer to drawings for specific dimensions. EP.MERSEN.OM 49
6 TYPE EK 961 SERIES Medium Voltage use Holders & lips USE LOKS & HOLERS AESSORIES AN SPARE PARTS Hinge Trunions and Operating Eyes for Use on isconnecting Switches use Size Hinge Trunion Model No. Operating Eye Model No. 961JW W KW AWW LW AWW612 EK-3 961W394 EK-3 and 9A61AWW612 EKO-3 961JW397 EKO KW398 EKO-3 961LW EP.MERSEN.OM
7 USE LOKS & HOLERS TYPE EK 961 SERIES Medium Voltage use Holders & lips USE SIZE (ERRULE IAMETER ) use Supports & isconnect Switches 961A101 Spare Live Parts(*) igure (ig.) Spare use lips(**) igure (ig.) use size 961AG AG NW WW AJ101 USE SIZE (ERRULE IAMETER 2") use Supports & isconnect Switches 961AA A201 Spare Live Parts(*) igure (ig.) Spare use lips(**) igure (ig.) use size 961AEG NW AGG AGJ AA A AEG NW AGG AGJ AHM WW E GL HM AHM E GL HM NW NW746 (*) Spare Live Parts: Order (1) Live Parts for each use Support and isconnecting Switch (includes live parts for both ends). (**) use lips: Order (2) use lips for each use Support and order (1) use lip for each isconnecting Switch. EP.MERSEN.OM 51
8 TYPE EK 961 SERIES Medium Voltage use Holders & lips USE LOKS & HOLERS USE SIZE (ERRULE IAMETER 3") use Supports & isconnect Switches 961AA AE305 Spare Live Parts(*) igure (ig.) Spare use lips(**) igure (ig.) use size 961AEG AGG AGJ AHM E GL HM NW NW JN AHM WW E GL HM NW JN AA AE AEG NW AGG AGJ301 (*) Spare Live Parts: Order (1) Live Parts for each use Support and isconnecting Switch (includes live parts for both ends). (**) use lips: Order (2) use lips for each use Support and order (1) use lip for each isconnecting Switch. or the 3 ferrule diameter we also offer the at # clips. These spring reinforced clips will accomodate one and two barrel 3-inch diameter medium voltage ferrule type fuses. The clip and reinforcing spring are intended to be bolted to a copper busbar through two.41 and 1.06 slots. A minimum copper-bus section of 1/4 x 1-1/2 is recommended for maximum ratings of 24R and 450E. The at # is for one pair of clips, enough for one fuse. 52 EP.MERSEN.OM
9 USE LOKS & HOLERS TYPE EK 961 SERIES Medium Voltage use Holders & lips USE SIZE (ERRULE IAMETER TWO 3" IN PARALLEL) use Supports & isconnect Switches Spare Live Parts(*) igure (ig.) Spare use lips(**) use size 961AHM E GL HM JN AA AE AEG AGG AWW NW AGJ AHM E410 N/A 961GL NW HM JN AA AE AEG AGG NW AGJ401 ONVERSION KIT TO OR USE ON USE SUPPORTS Model No. igure (ig.) Used on live parts igure (ig.) 961NW NW751 (Indoor) 961AWW738 (Outdoor) USE SIZE EE (ERRULE IAMETER TWO 4" IN PARALLEL) use Supports & isconnect Switches Spare Live Parts(*) igure (ig.) Spare use lips(**) use size 961A501 EE 961AG NW452 N/A EE 961AJ501 (*) Spare Live Parts: Order (1) Live Parts for each use Support and isconnecting Switch (includes live parts for both ends). (**) use lips: Order (2) use lips for each use Support and order (1) use lip for each isconnecting Switch. EE EP.MERSEN.OM 53
Class T 300 & 600 Volt Fuse Blocks F B 300 & 600V CLASS T FUSE BLOCKS RATINGS: FEATURES/BENEFITS: RECOMMENDED FUSE USAGE: CLIP & CONNECTOR TYPES
Class T 300 & 600 Volt use locks USE LOCKS 300 & 600V CLASS T USE LOCKS RATINGS: Volts: 300VAC/DC, 600VAC/DC Amps: 30A, 60A, 00A, 200A, 400A, 600A SCCR: 200kA Mersen Class T fuse blocks accommodate Class
More informationSupport / Disconnect Selection Guide
Support / Disconnect Selection Guide Selections are based on fuse diameter Fuse Size B C D DD 1 9/16 (1.56) inches 2 inches 3 inches two - 3" fuses in parallel Selections are broken down into supports
More informationSpring Reinforced. 30A & 60A Box. Spring. 30A Screw (R) Spring. 30A Screw. Spring Reinforced. 30A Pressure Plate
Class H, K & R USE LOCKS 250 & 600V CLASS H, K & R USE LOCKS RATINGS: Volts: 250VAC/DC, 600VAC/DC Amps: 30A, 60A, 00A, 0A, 400A, 600A SCCR: 0kA with class H fuses; 50kA with class K fuses; 0kA with class
More informationD I D /240 I. D x /240 I D / x x /24 I. D x /120
ndustrial ontrol Transformers lass 9070 www.square.com or the most up-to-date information The T units are designed for the global market and are the best choice when size and cost are of concern. This
More informationGears & Fuse Gears. Medium Voltage Fuses Clips. Clip lock design for CL-14 series. Mounting Details for Clip Lock Cat. No.
Clip lock design for CL-14 series Cat. No. 228-700-520 Cat. No. 228-700-530 (Pair at bottom) (Single at top) The Clip Lock design provides a reliable, high-pressure contact. Ferraz Shawmut CL-14 fuses
More informationR-Rated medium voltage fuses for motor circuit protection
Technical ata 6001 Supersedes September 2017 Features and benefits escription: Indoor/enclosure, R-Rated medium voltage, current-limiting fuses for motor circuit protection. urrent-limiting R-Rated fuses
More informationR-Rated medium voltage fuses for motor circuit protection
Technical ata 6001 Supersedes ecember 2015 Features and benefits escription: Indoor/enclosure, R-Rated medium voltage, current-limiting fuses for motor circuit protection. urrent-limiting R-Rated fuses
More informationBUSSMANN. 8.3kV E-Rated SERIES. Medium voltage fuses for feeder circuit, switchgear and transformer. protection. Technical Data 10352
8.3kV E-Rated Description: E-Rated, current-limiting, medium voltage fuses for feeder circuit, switchgear and transformer protection. Supersedes pril 2015 USSMNN SERIES Medium voltage fuses for feeder
More informationType SJK Test Switches
Type SJK Test Switches No-barrier design Self-extinguishing materials Front-connected, back-connected and flush-mounted styles Blades operate independently or can be ganged together DESCRIPTION STATES
More informationCS-3 SERIES E-RATED/MEDIUM VOLTAGE FUSES
SERIES E-RATED/MEDIUM VOLTAGE FUSES 5kV, 8kV and 15.5kV FERRULE MOUNTED FUSES Amp-trap E-rated 5kV 8kV and 15kV fuses have 2 or 3 inch diameter barrels with ferrules and are mounted in spring reinforced
More informationwww. ElectricalPartManuals. com SPECIFICATIONS Page 1 of 24 March 24, 2003
Types SM-4, SM-5, SMD-20, and SMD-40 Outdoor Distribution (4.16 kv through kv) Conditions of Sale STANDARD: Seller s standard conditions of sale set forth in Price Sheet apply, except as modified under
More informationSpecifications. S&C Power Fuses Types SM- 4, SM-5, SMD-20, and SMD-40 Outdoor Distribution (4.16 kv through 34.5 kv)
S&C Power Fuses Types SM- 4, SM-5, SMD-0, and SMD-40 Outdoor Distribution (4.16 kv through kv) For use with SM Refill Units or SMU Fuse Units Specifications Conditions of Sale STANDARD: The seller s standard
More informationL11 Fused and Non-Fused Disconnect Switches (30 & 60A) Dimensions are in millimeters (inches). Dimensions not intended for manufacturing purposes.
Series 11 used and Non-used isconnect Switches (30 & 60A) W A E H imension Approximate imensions in mm (in) Reference H W A ➊ E ➊ A1 108 (4-1/4) 120 (4-3/4) 101 (4) 90 (3-9/16) 105 (4-1/8) 85 (3-11/32)
More informationNo-barrier design Self-extinguishing materials Front-connected, back-connected and flush-mounted styles Blades operate independently or can be ganged together Recognized by UL and cul STATES Type have
More informationTable 1d - FSA for All Returns, Females Tax Year
PR 10 Newfoundland and Labrador A0A 20,250 597,345 1,920 1,720 2,580 3,150 1,960 1,610 1,360 1,030 1,020 740 550 460 630 470 410 290 290 70 20 A0B 8,850 249,804 780 740 1,200 1,520 1,010 790 540 430 370
More information6,3* 1,6 No Printed circuitboard Brass, Nickel plated MR 5-6 Y Yes Yes 5x20 &6x32
x20 and 6x32 Fuse sizes CLIPS FOR PRINTED CIRCUIT BOARD OR SCREW MOUNTING RATED CURRENT BELOW 30A* DEPENDING ON TYPE Main Characteristics Rated Power End Reference in box blister Catalog Size Current acceptance
More informationMedium Voltage Fuses
2,400-38,000 VAC General Information Current-limiting E and rated fuses are equipped with a mechanical indicator or striker pin that protrudes through the fuse cap upon operation of the fuse. This provides
More informationCurrent-limiting fuse mounts
Fusing quipment atalog ata 132046N Supersedes November 2015 urrent-limiting fuse mounts OOPR POWR SRIS eneral aton provides overload protection for all indoor and underground cable distribution systems
More informationE-RATED/MEDIUM VOLTAGE FUSES
SRIS -RATD/MDIUM VOLTAG FUSS 5kV, 8kV and 15.5kV Ferrule mounted fuses Amp-trap -rated 5kV 8kV and 15kV fuses have 2 or 3 inch diameter barrels with ferrules and are mounted in spring reinforced clips.
More informationHV DIN FUSE-LINKS FOR TRANSFORMER PROTECTION. March 2017
HV DIN FUSE-LINKS FOR TRANSFORMER PROTECTION March 2017 HV FUSE-LINKS IN THE WORLD UL STANDARD E OR R RATED: AMERICAN STANDARD DIN STANDARD: GERMAN STANDARD FR STANDARD: FRENCH STANDARD BS STANDARD: BRITISH
More informationHigh barriers Recognized by UL and cul Self-extinguishing materials Nonferrous material Corrosion-resistant nickel finish Safety-grip handle A complete line of switches is available for meter, relay, instrument,
More informationTYPE LS-K CONTACTORS TECHNICAL SPECIFICATIONS
TYPE LSK CONTACTORS TECHNICAL SPECIFICATIONS LSK CONTACTORS FROM LS K TO LS K INTERNATIONAL RATINGS Type Style Rated insulation voltage Ui Rated impulse voltage Uimp kv Mechanical endurance AC operation
More informationLimitor -G General Purpose Fuses
Limitor -G General Purpose Fuses HIGH VOLTAGE IEC FUSES DIN HV GENERAL PURPOSE FUSES FOR TRANSFORMERS FEATURES & BENEFITS Mersen HV fuse-links have been used for reliable protection in high-voltage switchgear
More informationDescriptive bulletin. Medium voltage load interrupter switchgear Reliable, low maintenance and economical for distribution applications
Descriptive bulletin Medium voltage load interrupter switchgear Reliable, low maintenance and economical for distribution applications General overview Reliable, low maintenance and economical Load Interrupter
More informationEQUIPMENT FOR CONNECTION OF A PHOTOVOLTAIC INSTALLATION (UP TO 5 KW)
Catalogue photovoltaic installations 2005 EQUIPMENT FOR CONNECTION OF A PHOTOVOLTAIC INSTALLATION (UP TO 5 KW) "POSSIBILITY OF ASSEMBLY FOR BIDIRECTIONAL ELECTRONIC MONOPHASE METER FOR ALL VERSIONS". MODULAR
More informationIEC Standard Back-Up Fuse-Links
3 / 7.2 kv 6 / 12 kv 10 / 17.5 kv 10 / 24 kv 20 / 36 kv Ferrule German DIN Standard Beyond our line of ANSI / IEEE current-limiting fuses, Mersen offers a full line of medium voltage fuse links according
More informationA system fault contribution of 750 mva shall be used when determining the required interrupting rating for unit substation equipment.
General Unit substations shall be 500 kva minimum, 1500 kva maximum unless approved otherwise by the University. For the required configuration of University substations see Standard Electrical Detail
More informationS&C Recloser Bypass Disconnects
S&C Recloser Bypass Disconnects Outdoor Distribution (14.4 kv through 34.5 kv) Application S&C Recloser Bypass Disconnects are station-type devices used to bypass and isolate automatic circuit reclosers
More informationReferences 4 Fuse carriers
References components 000_ -pole basic blocks Rating Cartridge fuse size umber of early break contacts () Single-phase protection device () Reference () Connection by spring terminals A 0 x 8 () Without
More informationBussmann series IEC cylindrical fuses
IE and ritish Standard fuses 5 ontents ussmann series IE cylindrical fuses Section page escription Fuses S Type P and fuses (N, S and PON) HR Form II lass fuses (GL) 3 HRI industrial ceramic body fuses
More information3.5. Current Limiting Fuses. Contents. CLPT and NCLPT Type Fuses. CLPT and NCLPT Type Fuses
.5 Limiting Fuses (N)CLPT Fuses Contents escription Selection................ Product Selection....................... etails........................ Page V14-T-4 V14-T-4 V14-T-48 Product escription aton
More informationS&C Mini-Rupter Switches Application The Standard Mounting Arrangement Scheme for S&C Mini-Rupter Switches Typical ED, reduced from full 11 size.
S&C Mini-Rupter es Indoor Distribution (4.16 kv through 25 kv) Selecting Standard Mounting Arrangements for Manually Operated Styles Application The Standard Mounting Arrangement Scheme for S&C Mini-Rupter
More informationSurge Arresters. Surge Arrester/Type L Fuse Cutout Combination. Description. Construction. Connectors/Brackets
Surge Arresters Surge Arrester/Type L use ombination Electrical Apparatus 235-26 escription ooper Power Systems surge arrester/type L interchangeable fuse cutout combinations are available in a wide variety
More informationDRIESCHER Y WITTJOHANN, S.A. MEDIUM VOLTAGE SOLUTIONS
DRIESCHER Y WITTJOHANN, S.A. MEDIUM VOLTAGE SOLUTIONS TECHNICAL SPECIFICATION LOAD BREAK DISCONNECTOR SWITCHES WITHOUT FUSE HOLDER UIT FUSE HOLDER SECTION CONTENTS PAGE 1 General Features 3 2 Standards
More information600V, Non-Fusible, (3-Pole, 3 Phase)
0V, Non-Fusible, (3-Pole, 3 Phase) ulletin 1494G/1494GX1494GY Non Fusible 0 A switch ratings 0V: 3-pole, 3-phase and 6-pole, 3-phase versions versions only Type 3R/4/12 (painted metal), Type 4/4X (stainless
More informationNegative (sliding on the track)
CURRENT COLLECTOR SYSTEM (CCD) CCD FOR RUBBER WHEELS Current collector devices are used by Metro to collect the energy from the third rail to energize the Electrical Multiple Unit installed in the trailers.
More informationM/1000, Heavy Duty Cylinders Double Acting
> > Ø 2 to 12 (50 to 305 mm) > > Extremely rugged heavy duty construction - ideal for use in the most arduous conditions. > > Large range of bore sizes - ideal for a wide variety of industrial applications.
More informationIndustrial Control Transformers
6 Industrial Control Transformers Section 6 Industrial Control Transformers provide a low and safe control voltage for the operation of electromagnetic devices, such as motor starters, contactors, solenoids
More informationUL 98 Fusible Disconnect Switches
UL 98 Fusible isconnect witches ICONNECT WITCHE Mersen s fusible disconnect switches are listed to UL 98 and bear the CE mark conforming to IEC 60947-3. They are service entrance devices capable of fully
More informationLPSRK30SP 30A 600V TD Dual Elem Class RK1 Low Peak Fuse
LPSRK30SP 30A 600V TD Dual Elem Class RK Low Peak Fuse Catalog Number Manufacturer Description Weight per unit Product Category LPSRK30SP 30A 600V Class RK Low Peak Dual Element, Time Delay Fuse 600 (lbs/each)
More informationMonorail. Monorail CCD FOR MONORAIL/SKYTRAIN FEATURES & BENEFITS APPLICATIONS STANDARDS CURRENT COLLECTOR SYSTEM (CCD)
CURRENT COLLECTOR SYSTEM (CCD) CCD FOR MONORAIL/SKYTRAIN Current collector devices are used by Metro to collect the energy from the third rail to energize the Electrical Multiple Unit installed in the
More informationME series dead-front fused sectionalizing enclosures MEC current limiting fusing and MEP power fusing 200 Amperes,15-25 kv
ME series dead-front fused sectionalizing enclosures MEC current limiting fusing and MEP power fusing 200 Amperes,15-25 kv ABB ME series fused sectionalizing enclosures ABB's dead-front Padmount ME series
More informationParts Lists. Forward Series. Rev. Feb. 2017
s HSU09VHJ(DB)-G / HSU09VHJ(DB)-W HSU12VHJ(DB)-G / HSU12VHJ(DB)-W HSU18VHJ(DB)-G / HSU18VHJ(DB)-W HSU24VHJ(DB)-G / HSU24VHJ(DB)-W 1800 Valley Road Wayne, NJ 07470 Tel +973.617.1800 www.haier.com - Edition
More informationHHD HIGH VOLTAGE FUSES GERMAN DIN STANDARD. The temperature limiting function of the fuse striker pin. Design and construction.
HHD HIGH VOLTAGE GERMAN DIN STANDARD FOR AIR & GAS INSULATED SWITCHGEARS OUTDOOR SWITCHGEARS The striker pin system is connected by means of a high resistance parallel conductor. After melting the main
More information15-kV Safefront Mini-Switch Source Isolated Pad-Mounted Switchgear 140 Amp (Max) Clip-Mounted Current-Limiting Fuses
Page 1 2016 Heavy duty 11-gauge steel enclosure is all-welded construction for long life 200 Amp Elliott air-insulated bushing wells accept IEEE Standard inserts and elbows ushing wells may be added or
More informationMedium Voltage Standby non-paralleling Control GUIDE FORM SPECIFICATION
Medium Voltage Standby non-paralleling Control 1. GENERAL GUIDE FORM SPECIFICATION A. The requirements of the contract, Division 1, and part 16 apply to work in this section. 1.01 SECTIONS INCLUDE A. Medium
More informationLow-Peak 600V Class RK1
LPS-RK 600Vac/300Vdc, 1 10-60A, Dual Element, Time-Delay Fuses Dimensions - in 5" (± 0.31) 5.5" (± 0.31) Available with easyid open fuse indication 1/10 to 30A 0.81" (±0.008) 35 to 60A 1.06" (±0.008) Description:
More informationParts Lists. Novel Series. Rev. Feb. 2017
s HSU09VHG(DB)-G / HSU09VHG(DB)-W HSU12VHG(DB)-G / HSU12VHG(DB)-W HSU18VHG(DB)-G / HSU18VHG(DB)-W HSU24VHG(DB)-G / HSU24VHG(DB)-W 1800 Valley Road Wayne, NJ 07470 Tel +973.617.1800 www.haier.com - Edition
More informationDRILL CORD. Insulation Nominal Size. Approximate Amps Anixter. Number Number Thickness O.D.
DRILL CORD Synthetic Rubber Insulation 75 C, 600 Volts For use on drills and other mining equipment. For use on circuits not exceeding 600 volts at a maximum conductor temperature 75 C. 1. CONDUCTOR: Flexible,
More informationRBA Catalog Numbers and Information
50 RBA s and Information Type RBA Expulsion Fuses for Use Indoors or in an Enclosure Ampere Rating Standard Speed (Fuse Refills) Curve Reference 36-635 Time-Lag (Fuse Refills) Curve Reference 36-635 Approx.
More informationSnap-in covers I Voltage taps
ACCESSORIES Accessories for analogue instruments, current transformers, switchboards, voltage taps for busbars and round conductors. Snap-in covers I Voltage taps Voltage taps page 10/1 10 For analogue
More informationCL-14 SERIES E-RATED / MEDIUM VOLTAGE FUSES
SRIS -RATD / MDIUM VOLTAG FUSS 5kV AND 15kV CLIP-LOCK MOUNTD FUSS Amp-trap -rated 5kV and 15kV fuses have 3" diameter barrels and mount in unique cam-locking clips, for superior connections as well as
More informationSpare Parts. SPC-2 Sanitary Electro-Pneumatic Modulating Valve SP70736-GB
Spare Parts SPC-2 Sanitary Electro-Pneumatic Modulating Valve SP70736-GB5 2002-11 Type SPC-2 (Samson actuator, beige colour) 2 Parts for FEP seal Reg.: 9805 Intro.: 9708 Type SPC-2 (Samson actuator, beige
More informationSPECIFICATION BULLETIN
SPECIFICATIONS Conditions of Sale STANDARD: Seller s standard conditions of sale set forth in Price Sheet 150 apply, except as modified under WARRANTY QUALIFICATIONS on page 3. SPECIAL TO THIS PRODUCT:
More informationMEDIUM VOLTAGE CE-B METAL CLAD SWITCHBOARDS. CE - B - C - en - REV
MEDIUM VOLTAGE MEDIUM VOLTAGE APPLICATION CE-B Metal Clad switchboards are designed for use in public and industrial distribution system up to 24kV for the operation and protection of lines, generators,
More informationCABINET OPTIONS AND DESIGNATORS CODE LETTERS
CABINET OPTIONS AND DESIGNATORS Hinges: ~Stainless steel lift off Nuts and Bolts: ~ Stainless steel Hardware: ~ Handles and Corbin locks are stainless steel or zinc plated Windows: ~ Lexan Backboards:
More informationMetal-Enclosed Switches. Medium Voltage. Medium Voltage Metal-Enclosed Switches Contents
January 2003 Vol. 1, Ref. No. [1011] -1 Medium Voltage Metal-Enclosed Switches Contents Description Page MVS................................... -2 and Breaker MSB........................ -3 Metal-Enclosed
More informationPositive Track with fuse box included
Positive Track with fuse box included CURRENT COLLECTOR SYSTEM (CCD) CCD FOR RUBBER WHEELS Current collector devices are used by Metro to collect the energy from the third rail to energize the Electrical
More informationschneider-electric.com/sg K60 Circuit Breakers The affordable way to stay safe from electrocution and electrical overloads schneider-electric.
K0 Circuit Breakers The affordable way to stay safe from electrocution and electrical overloads Overview K0 Circuit Breaker Technical Specification MCB RCCB K0 Circuit Breaker K0N K0H ID K Number of poles
More information35-kV Safefront SuperWell Mini-Switch Source Isolated Pad-Mounted Switchgear 50 Amp (Max) Clip-Mounted Current Limiting Fuses
Page 1 2016 EPMR-35-311S-R2/ESW-CM9 Three Phase Two Ways per Phase 200 Amp 35 kv Class Eaton s CPS LRTPs 50 Amp (Max) 27 kv Clip-Mounted NX Fuse Provisions 21.1/36.6 kv Grounded Wye Max Design, 150 kv
More information9070T150D1 Industrial Control Transformer, 150VA
Product Data Sheet 9070T150D1 Industrial ontrol Transformer, 150 Technical haracteristics Application Approvals atalog Reference Number Depth Height Width Winding Material Temperature Rise Type Primary
More informationType MTS Miniature Test Switches
Type MTS Miniature Test Switches o o o o Compact and versatile Front- and back-connected styles Safe, durable, rugged and reliable Recognized by CUL & UL DESCRIPTION In many panelboard, switchgear, metering,
More informationPipe Supports PS 1. PO Box Highbrook Auckland
1 salesinfo@mechanicalsupport.co.nz PO ox 204336 Highbrook uckland www.mechanicalsupport.co.nz 2 2 Piece lips To Suit Outside Pipe iameter Width x Thickness E2024 HG 8 32 x 1.6 0.04 E2025 HG 11 32 x 1.6
More informationMedium voltage fuses Medium voltage fuses
European Fuses DIN Fuses 7.2kV - 36kV IBD 7.2 UP TO 36 KV HIGH-VOLTAGE FUSES DESIGNED FOR POWER TRANSFORMER PROTECTION INTERIOR/EXTERIOR USE CERAMIC HOUSING MEDIUM CLASS TRIP-INDICATOR COMBINED WITH A
More informationOutdoor Enclosure Power System ENC X100MP48F20-AC6
Outdoor Enclosure Power System ENC673034-1X100MP48F20-AC6 Manual MA015151A4 Issue 1 Nov 2010 Copyright 2010 Myers Power Products, Inc. Part# A015151A4 MA015151A4 Iss1 Page 1 of 24 Dimensions Outdoor Enclosure
More informationOperation and Maintenance manual. fusible shunt trip switch
Operation and Maintenance manual fusible shunt trip switch Table of Contents Fusible Shunt Trip Switch Device Overview... 2 Installation Instructions... 3 Catalog Number Selection Table... 4 Motor Fuse
More informationCL-14 SERIES E-RATED / MEDIUM VOLTAGE FUSES
SERIES E-RATED / MEDIUM VOLTAGE FUSES 5kV AND 15kV CLIP-LOCK MOUNTED FUSES Amp-trap E-rated 5kV and 15kV fuses have 3" diameter barrels and mount in unique cam-locking clips, for superior connections as
More informationC1000 Series Automatic Cap Bank
C1000 Series Automatic Cap Bank Metal Enclosed - Medium Voltage Capacitors Assemblies Fixed / Auto Medium Voltage 5, 15, 25 and 35 kv Class Customized to your specifications The Reactive Power Solution
More informationMEDIUM VOLTAGE CE-B METAL CLAD SWITCHBOARDS. CE-B-C-en-REV
CE--C-en-REV.04 2016.1 MEDIUM VOLTAGE MEDIUM VOLTAGE APPLICATION CE- Metal Clad switchboards family are designed for use in public and industrial distribution system up to 40,5kV for the operation and
More informationHHD. High Voltage Fuses German DIN Standard. The temperature limiting function of the fuse striker pin. Design and construction.
HHD High Voltage Fuses German DIN Standard For Air & Gas Insulated Switchgear Indoor and Outdoor Application The striker pin system is connected by means of a high resistance parallel conductor. After
More information5kV to 38kV, 630 Amp to 4000 Amp Indoor or Outdoor Application
The most advanced Arc-Resistant Switchgear, designed and built to provide maximum safety in the event of an Internal Arcing Fault. 5kV to 38kV, 630 Amp to 4000 Amp Indoor or Outdoor Application Page 1
More information8WH2 Spring-Loaded Terminals
8WH2 Spring-Loaded Terminals /2 Introduction /3 General data on 8WH /7 8WH through-type terminals 1) /18 8WH hybrid through-type terminals 1) /21 8WH fuse terminals /23 8WH isolating blade terminals /25
More informationCATALOG. Blackburn Flexible braids
CAALOG Blackburn lexible braids homas & Betts is now ABB Installation Products, but our long legacy of quality products and innovation remains the same. rom connectors that help wire buildings on Earth
More informationIndustry s most comprehensive medium voltage circuit protection
Medium voltage fuses BUSSMANN SERIES Industry s most comprehensive medium voltage circuit protection We have your solution For over 100 years, Bussmann TM series fuses have provided superior circuit protection,
More informationFX Full-Range Current-Limiting Fuse
Hi-Tech FX Full-Range Current-Limiting Fuses Trans-Guard FX Full-Range Current-Limiting Fuse Patented damage sensor significantly reduces the risk of fuse failure should the fuse be subjected to an element-damaging
More informationNFPA 70E Standard for Electrical Safety Requirements for Employee Workplaces. Table Hazard Risk Category Classification
Table 3-3.9.1 Hazard Risk Classification Table 3-3.9.1 Hazard Risk Classification Panelboards rated 240 V and below Notes 1 and 3 - - - Circuit breaker (CB) or fused switch operation with covers on 0 N
More informationSingle Socket and Horizontal Metering
GE Energy onnections Single Socket and Horizontal etering EP pproved Single Socket etering EP pproved pplication Information GE s Single Socket etering products are designed for residential use. They are
More informationChargestar T26 / T45. Please read and fully understand the instructions in this manual before operation. Keep this manual safe for future reference
Please dispose of packaging for the product in a responsible manner. It is suitable for recycling. Help to protect the environment, take the packaging to the local amenity tip and place into the appropriate
More informationVariable Regulated Voltage Power Supply Instruction Manual Model XP-605 / XP-752A
Variable Regulated Voltage Power Supply Instruction Manual Model XP-605 / XP-752A Copyright Elenco Electronics, Inc. REV-D DC POWER SUPPLY 1 2 4 5 CURRENT VOLTAGE 13 3 6 C.C. C.V. 7 FINE COARSE FINE COARSE
More informationContactors & Starters Index
ontactors & Starters Index NEMA ontrol Description Page Number General Information - HP... A Magnetic ontactors - HP...4 A Magnetic Reversing ontactors - HP... 4 A Magnetic Starters - HP... A Magnetic
More information8WH2 Spring-Loaded Terminals
8WH2 Spring-Loaded Terminals /2 Introduction /3 General data on 8WH /7 8WH through-type terminals 1) /18 8WH hybrid through-type terminals 1) /21 8WH fuse terminals /23 8WH isolating blade terminals /25
More informationOutdoor Enclosure Power System ENC X100MP48F20
Outdoor Enclosure Power System ENC673034-1X100MP48F20 Manual MA015152A1 Issue 1 Oct 2010 Copyright 2010 Myers Power Products, Inc. Part# A015152A1 MA015152A1 Iss1 Page 1 of 22 Dimensions Outdoor Enclosure
More informationSet-up, Operation & Maintenance Manual
Set-up, Operation & Maintenance Manual 2100, 4100, 6100 Series Top Mount Drive Package for Standard Load 90 Industrial 60 Hz Gearmotors Table of Contents Warnings General Safety.................... 2 Introduction................................
More informationCTN QTY 7/374 8/346 11/375 12/ /298 18/324 19/470 20/299 22/472 24/473. Two-Hole NEMA CTN QTY
PAGE 2 PEEP HOLE STANDARD BARREL COPPER LUGS Allows inspection of the termination to assure complete cable insertion GL SERIES One-Hole 2000 2002 998 999 2004 200 200 2005 200 2008 207 2007 2009 200 20
More informationECS CONNECTION OF LARGE LV SERVICES TO SECONDARY DISTRIBUTION SUBSTATIONS
Network(s): Summary: ENGINEERING CONSTRUCTION STANDARD ECS 03-0054 CONNECTION OF LARGE LV SERVICES TO SECONDARY DISTRIBUTION SUBSTATIONS EPN, LPN, SPN This standard details the procedures to be undertaken
More informationFuse Box on Bogies 750VDC
Fuse ox on ogies 750VD Fuse ox on ogies 750VD ON OARD FUSE OX AND ONNEXION OX FUSE OX RANGE 750VD - 1500VD - 2000VD FEATURES & ENEFITS For more than 50 years, Mersen have been providing the market with
More informationSolar Power Switchgear & Energy Storage Renewable Energy Systems
7 Solar Power Switchgear & Energy Storage Renewable Energy Systems - Solution Brochure www.apt-power.com 433 N. 36 th Street PROVIDING A COMPREHENSIVE Lafayette, IN 47905 www.apt-power.com 433 APPROACH
More informationSY PVC / BS EN Control Flexible Cable
SY PVC / BS EN 50525-2-51 Control Flexible Cable Eland Product Group: A5J APPLICATION Used as interconnecting cable for measuring, controlling or regulation in control equipment for assembly and production
More informationMEDIUM VOLTAGE CE-B36 METAL CLAD SWITCHBOARDS. CE - B36 - C - en - REV
CE - B36 - C - en - REV.00 2011.9 EDIU VOLTAGE EDIU VOLTAGE APPLICATION CE-B etal Clad switchboards are designed for use in public and industrial distribution system up to 36kV for the operation and protection
More informationTA Ta VA CTRL-XFRMR
3804 South Street 7964-7263, TX Nacogdoches Phone: 936-69-7941 Fax: 936-60-468 TA2437 Ta-2-437 10VA CTRL-XFRMR Acme Electric Catalog Number TA2437 Manufacturer Acme Electric Description Control Transformer,
More information3 - Protection components Motor circuit-breakers
Contents 0 - Protection components Motor circuit-breakers protection components for the motor protection Thermal-magnetic motor circuit-breakers Selection guide..............................................page
More informationIndustrial Control Transformers
Industrial Control Transformers 5 The SBE - Encapsulated Series The SBE Encapsulated industrial control transformers are epoxy encapsulated to seal the transformer windings against moisture, dirt and industrial
More informationMDS Dead-front Padmount Switchgear Style Guide 1VAM SG May 2010 Revision D
MDS Dead-front Padmount Switchgear Style Guide 1VAM224804-SG May 2010 Revision D The MDS style guide aids in the proper selection of your style number. When ordering the MDS, the style number must be given
More informationSet-up, Operation & Maintenance Manual
Set-up, Operation & Maintenance Manual 2100, 4100, 6100 Series Bottom Mount Drive Package for Standard Load 90 Industrial 60 Hz Gearmotors Table of Contents Warnings General Safety....................
More informationPretest Module 24 Three-phase Service Entrance
Pretest Module 24 Three-phase Service Entrance 1. What is the most widely used three-phase service entrance system? 2. What are the three most common voltage combinations for three-phase, four-wire systems?
More informationCURRENT -LIMITING FUSE UNITS TYPES EJ-2 AND EJ0-2 FOR MOTOR CIRCUITS
' l :#, ISTRUCTIOS CURRET -LIMITIG FUSE UITS A Type EJ-2 fuse unit (for indoor use), or a Type EJ-2 fuse unit (for indoor or outdoor use), consists of a Fiberglass fuse tube having metal ferrules at each
More informationMEDIUM VOLTAGE AIR INSULATED ARC-RESISTANT LOAD BREAK AND DISCONNECT SWITCHES
MEDIUM VOLTAGE AIR INSULATED ARC-RESISTANT LOAD BREAK AND DISCONNECT SWITCHES Description JRS arc-resistant fused/non-fused load break and fused/non-fused disconnect switches are available for applications
More informationLIFTKET wire rope winch with wall bracket or foot support
Issue August 2014 Spare part list LIFTKET wire rope winch LSF 175/1-19 LSF 200/1-15 LIFTKET wire rope winch with wall bracket or foot support SP-Code Description Description of spare part section Page
More informationPHOENIX CONTACT
Current transformers INTERFACE Data sheet 03359_en_03 PHOENIX CONTACT 20-04-04 Description The PACT Analog current transformers form a complete range of bus-bar, plug-in and winding current transformers
More informationVariable Frequency AC Motor Drive Units
14 Variable Frequency A Motor Drive Units ulletin 2162T and 2163T PowerFlex 40 Drive................................................. 171 These combination variable frequency A motor drive units are specifically
More information