Spring Reinforced. 30A & 60A Box. Spring. 30A Screw (R) Spring. 30A Screw. Spring Reinforced. 30A Pressure Plate
|
|
- Evangeline Rosamond McKinney
- 6 years ago
- Views:
Transcription
1 Class H, K & R USE LOCKS 250 & 600V CLASS H, K & R USE LOCKS RATINGS: Volts: 250VAC/DC, 600VAC/DC Amps: 30A, 60A, 00A, 0A, 400A, 600A SCCR: 0kA with class H fuses; 50kA with class K fuses; 0kA with class R fuses Mersen Class H, K and R fuse blocks accommodate all Class H, K and R 250 and 600V power fuses. A choice of screw, pressure plate, box and special order stud connectors fit a wide range of stranded or solid copper or aluminum wire. s are either molded glass-filled polycarbonate (GPC) or phenolic with verified dielectric strength in excess of 2500V. 30, 60 and 00A fuse blocks feature a unique adder block which can be snapped onto -, 2- or 3-pole blocks to form multipole segmented blocks of as many CLIP & CONNECTOR TYPES 30A & 60A Clips s s poles as desired. Non- All fuse clips are made of high conductivity tinplated copper, with a choice of spring reinforced or nonspring Class H & K Non- 30A & 60A Non- 30A Screw Non- 30A Pressure Plate 30A & 60A 30A Screw (R) 30A Screw reinforced clips in 30A and 30A Pressure Plate 60A. Clips 00A and above are spring reinforced. s 400A 00A In-Line Clip RECOMMENDED USE USAGE: locks (250V) use with A2D-R, A2K-R, TR-R locks (600V) use with A6D-R, A6K-R, TRS-R Class H & K locks (250V) use with OT, R, A2Y types & 3 OTN, CRN, NRN Class H & K locks (600V) use with OTS, RS, A6Y types & 3 CRS, NRS APPROVALS: All fuse blocks meet the requirements of UL 4248 UL listed, guide IZLT, ile E52283 UL recognized component guide IZLT2, file E52283 CSA certified class 6225, ile A Side Clip 400A Side Clip 22 8 Mersen. All rights reserved. Mersen reserves the right to change, update, or correct, without notice, any information contained in this datasheet.
2 USE LOCKS CLASS H, K & R 250 VOLT, 30 & 60 AMPERE CLASS H, K AND R USE LOCKS 30 GPC 60 GPC Class H & K ig. Non- Class H K einforced R 30* 306* 306R* 2 OX 2 # R R 4 30 R Cu 3* 36* 36R* 2 SCREW 2 # R R R Cu 32* 326* 326R* 2 PRESSURE PLATE 2 # R R 4-5 5R * - 6* 6R* 2 OX 2 # R R R R 6 OX 2 # R R R 5 * R 6 OX 2 # R R 8 Torque Note: To convert 30A adder pole to single pole, use end barrier #U To convert 60A adder pole to single pole, use end barrier #U * -pole, 30A block does not accept adder pole. ** use blocks have copper box connectors and clips and are for copper wires only. These are specifically designed with the same coefficient Recommended mounting screws for all 30A and 60A fuse blocks: #0 (.90" dia.) igure igure 2 igure 3 igure 4 igure 5 igure 6 igure 7 igure 8 23
3 CLASS H, K & R USE LOCKS 250 VOLT, 00 & 0 AMPERE CLASS H, K AND R USE LOCKS Class H & K ig. Torque 00 GPC 0 R 36 36R 2 2 2/0-# R R R 06 06R 2 2 2/0-# R R 4 Side-Clip AL/Cu 20 20R 5 3 0kcmil-# R 6 Side-Clip 25 25R 5 3 0kcmil-# R 6 50 Note: To convert 00A adder pole to single pole, use end barrier #U * use blocks have copper box connectors and clips and are for copper wires only. These are specifically designed with the same coefficient Recommended mounting screws: All 00A-/4" (.250" dia.) 0A, -pole - #0 (.90 dia.) 0A, 3-pole - 5/6 (.33 dia.) igure igure 2 igure 3 igure 4 igure 5 igure 6 24
4 USE LOCKS CLASS H, K & R 250 VOLT, 400 & 600 AMPERE CLASS H, K AND R USE LOCKS Class H & K ig. Torque * Side-Clip kcmil R 24003R 2 * * R 3 Side-Clip kcmil R R 3 (2) 0kcmil-# R R 3 (2) 0kcmil-# R R 5 (2) 500kcmil-# R 6 * R 5 (2) 500kcmil-# R * Not UL Listed or CSA Certified ** use blocks have copper box connectors and clips and are for copper wires only. These are specifically designed with the same coefficient Recommended mounting screws for all 400A and 600A fuse blocks: 5/6 (.33" dia.) igure igure 2 igure 3 igure 4 igure 5 igure 6 25
5 CLASS H, K & R USE LOCKS 600 VOLT, 30 & 60 AMPERE CLASS H, K AND R USE LOCKS 30 GPC 60 GPC Class H & K Non Note: To convert 30A or 60A adder pole to single pole, use end barrier #U0936. * use blocks have copper box connectors and clips and are for copper wires only. These are specifically designed with the same coefficient Recommended mounting screws for all 30A and 60A fuse blocks: /4" (.250"dia.) Class H & K R R 2 2 # R R R Screw Cu R 2 2 # R R R Pressure Cu R 2 2 Plate # R R R R 2 2 # R R R R 2 2 # R R R R 2 2 # R R 4 ig. Torque igure igure 2 igure 3 igure 4 26
6 USE LOCKS CLASS H, K & R 600 VOLT, 00 & 0 AMPERE CLASS H, K AND R USE LOCKS 00 0 Class H & K ig R 2/0-# R R R 2/0-# R R R 4 3 Side-Clip 0kcmil-# R R 4 3 Side-Clip 0kcmil-# R 5 * use blocks have copper box connectors and clips and are for copper wires only. These are specifically designed with the same coefficient Recommended mounting screws: All 00A-/4 (.250 dia.) 0A, -pole - #0 (.90 dia.) 0A, 3-pole - 5/6 (.33 dia.) Torque 50 igure igure 2 igure 3 igure 4 igure 5 27
7 CLASS H, K & R USE LOCKS 600 VOLT, 400 & 600 AMPERE CLASS H, K AND R USE LOCKS * Not UL Listed or CSA Certified ** use blocks have copper box connectors and clips and are for copper wires only. These are specifically designed with the same coefficient Recommended mounting screws for all 400A and 600A fuse blocks: 5/6 (.33" dia.) Class H & K 3 * Side-Clip kcmil R 64003R 2 * * R 3 Side-Clip kcmil R 2 AL/Cu R 3 (2) 0kcmil-# R 4 * R 3 (2) 0kcmil-# R R 5 (2) 500kcmil-# R 6 * R 5 (2) 500kcmil-# R 6 ig. Torque 500 igure igure 2 igure 3 igure 4 igure 5 igure 6 28
Class T 300 & 600 Volt Fuse Blocks F B 300 & 600V CLASS T FUSE BLOCKS RATINGS: FEATURES/BENEFITS: RECOMMENDED FUSE USAGE: CLIP & CONNECTOR TYPES
Class T 300 & 600 Volt use locks USE LOCKS 300 & 600V CLASS T USE LOCKS RATINGS: Volts: 300VAC/DC, 600VAC/DC Amps: 30A, 60A, 00A, 200A, 400A, 600A SCCR: 200kA Mersen Class T fuse blocks accommodate Class
More informationGears & Fuse Gears. American General Purpose Fuses Cylindrical & Blade Fuse Blocks Class H, K & R CLASS H, K AND R FUSE BLOCKS. Ratings.
Ratings Ferraz Shawmut Class H, K and R Fuse Blocks accommodate all Class H, K and R 250 and 600V power fuses. A choice of screw, pressure plate, box and special order stud connectors fit a wide range
More informationT CLASS T FUSE BLOCKS
Ferraz Shawmut Fuse Blocks accommodate fuses up to 600A. Insulators are either of durable, glassfilled polycarbonate (GFPC) or phenolic with verified dielectric strength in excess of 2500V. Ferraz Shawmut
More informationCLASS J 600 Volt Fuse Blocks
CLASS J 600 Volt Fuse Blocks Mersen Class J fuse blocks accommodate all Class J fuses. A choice of screw, pressure plate, box and special order stud connectors it a wide range of stranded or solid copper
More informationOpen-Style Power Distribution Blocks
MPDB Series Open-Style Power Distribution Blocks Power distribution The Next Generation Power Distribution Block (PDB) Ratings: Volts: 000VAC/DC Amps: 65 to 2260A based on NEC table 30.5(B)(6) 75ºC ampacities
More informationClass H & K Fuse Holders - 250/600 Volt
Class H & K - 250/0 Volt Specifications: Approved for 10,000 Amp Withstand Rating and Short Circuit Current Ratings (SCCR) UL Listed File No. IZLT.E35113 CSA Certified File No. LR21455 RoHS Compliant &
More informationOpen-Style Power Distribution Blocks
I MPDB Series Open-Style Power Distribution Blocks The Next Generation Power Distribution Block (PDB) Ratings: Volts: 1000Vac/DC Amps: 65 to 2260A based on NEC table 310.15(B)(16) 75ºC ampacities Mersen
More informationR6F30A1S R6F30A1S 1P 60A 600V Fuse BLK. Features. Long Description
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 Catalog Number Manufacturer Description Weight per unit Product Category Features Clip Type Fuse Current Rating Fuse Type
More informationFuse Blocks & Holders
Fuse Blocks & olders Finger-safe IEC, Traditional, Panel Mount... You name the block, we ve got it in stock. Your problem: You need a range of standard fuse blocks to meet industrial requirements. You
More informationI power distribution. Blocks. challenges. Finger-Safe / FSPDB Series...I2. MPDB Open-Style PDBs... I4. MPDB62-MPDB63 (Mini) Open-Style PDBs...
Power Distribution Blocks I A powerful way to manage your power distribution challenges. Your problem: You re facing the enormously complex wiring requirements of an automated manufacturing facility. Or
More informationA powerful way to manage your power distribution challenges. I Power Distribution Blocks
I Power Distribution Blocks A powerful way to manage your power distribution challenges. Your problem: You re facing the enormously complex wiring requirements of an automated manufacturing facility. Or
More informationPower Distribution Blocks
ower istribution Blocks A OWERFUL WAY TO MANAGE YOUR OWER ISTRIBUTION CHALLENGES Your problem: You re facing the enormously complex wiring requirements of an automated manufacturing facility. Or the compatibility
More informationSERIES POWER DISTRIBUTION BLOCKS
62000-69000 SERIES POWER DISTRIBUTION BLOCKS VERSATILE POWER DISTRIBUTION BLOCKS FOR CABLE TERMINATIONS Ferraz Shawmut Power Distribution Blocks afford a safe, convenient way of splicing cables, splitting
More informationFuse Blocks & Holders
ULTRASAFE Fuse olders / USCC, USM & DC ULTRASAFE Fuse olders / USFM ULTRASAFE Fuse olders / US3J & US6J ULTRASAFE Fuse olders / US14 & US22 Fuse Blocks / Class J Space-Saving Fuse Blocks / SJ Series Fuse
More informationFuseblocks. Voltage Ratings: Ampere Ratings: Leakage Current: Catalog/system number Torque Range System Number
class T FuseBlocks NEW! Smaller Design Description The new Littelfuse Class T fuse blocks offer many advantages over previous generations that are noted in the features and benets section. Of particular
More informationBH-1 modular fuse blocks, 700 V, 400 A
Supersedes December 1998 Agency information UL Recognized, Guide IZLT2, File E14853 up to 700 V CSA Certified, Class 6225-01, File 47235 up to 700 V CE RoHS compliant Materials Base - light-weight, high
More informationClass J modular ferrule and knifeblade fuse blocks
Technical Data10488 SupersedesFebruary 2016 Class J modular ferrule and knifeblade fuse blocks Knifeblade fuse blocks from 100 to 600 amps feature phase barriers between poles for additional safety with
More informationPOWR-BLOKS. POWR-GARD Blocks and Holders Datasheet. Distribution Blocks Splicer Blocks Covers. Connectors. Ampere Ratings. Description.
Distribution Blocks Splicer Blocks Covers Connectors Box lug connectors are designed for use with a single or multiple, solid or class B or C stranded conductor. For UL approved use of more than one conductor
More informationLH600303C 1/10-30A 3P 600V Class H Box Lug Fuse Block
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 LH600303C 1/10-30A 3P 600V Class H Box Lug Fuse Block Littelfuse Catalog Number LH600303C Manufacturer Littelfuse Description
More informationClass R 250V and 600V modular ferrule and knifeblade fuse blocks
Technical Data 1048 Class R 2V and 600V modular ferrule and Knifeblade fuse blocks from 100 to 600 amps feature phase barriers between poles for additional safety with up to four mounting holes per pole
More informationPOWR-BLOKS. POWR-GARD Blocks and Holders Datasheet. Distribution Blocks Splicer Blocks Covers. Connectors. Ampere Ratings. Description.
Distribution Blocks Splicer Blocks Covers Connectors Box lug connectors are designed for use with a single or multiple, solid or class B or C stranded conductor. For UL approved use of more than one conductor
More informationPower Distribution Blocks
Power Distribution Blocks One powerful way to manage your power distribution problems. Your problem: You re facing the enormously complex wiring requirements of an automated manufacturing facility. Or
More informationTerminal Blocks. Section 12. Control Catalog 12-1
CR151K Resilient Modular Terminal Blocks CR151C (top) and CR151A Modular Terminal Blocks DIN-rail Mounted Terminal Blocks (CR151K)...12-2 Product Tables...12-3, 12-4 Accessories...12-3, 12-4 Technical
More informationPower Distribution Blocks
I Finger-Safe Power Distribution Blocks Power Distribution Blocks Safety evolving Ratings: Volts: 1,2,3 1500VAC/ DC; 4,5 600VAC/DC Amps: 175 to 840A SCCR: 600V or less, 100kA with proper fuse; Over 600V,
More informationNon-Fused Load Break Switches FSSC, SX, SXDC, SC
Non-Fused Load Break Switches FSSC, SX, SXDC, SC UL 98 Non-Fused Load Break Switches Mersen disconnect switches are extremely durable, manually operated, non-fused disconnect switches. These heavy-duty
More informationModulostar US10 Modular fuse-holders
Modulostar US10 FUSE HOLDERS, FUSE BASES AND SUPPORTS UL/CSA FUSE HOLDERS FEATURES & BENEFITS The innovative and comprehensive Modulostar range of Mersen fuse-holders. are finger-safe under IEC standards
More informationUL Recognized power distribution blocks
Susedes September 2016 example: 16220-3 is a 3-16220 Where: The prefix 16220 defines the block s lineside characteristics (i.e., one conductor that accepts 2/0 - #14 Cu, or 2/0 - #8 Al conductors) and
More informationUp to 60 A Class R 250 V and 600 V ferrule power distribution fuse blocks
Technical Data 09 Effective June 06 Up to 60 A Class R 50 V and 600 V ferrule power distribution fuse blocks Catalog symbols: RM5060-_MW_ RM60030-_MW_ RM60060-_MW_ Features and benefits: Combination power
More informationSection 10: Terminal Blocks
Terminal Blocks Section : Terminal Blocks CR151K Resilient Modular Terminal Blocks DIN-rail Mounted Terminal Blocks (CR151K)...-2 Product Tables...-3, -4 Accessories...-3, -4 Technical Data...-5 Outlines
More informationStudded Power Feed Thru Terminal Blocks
ST722 Series The Studded Power Feed Thru were designed for applications where power feed thru is necessary using standard double hole lugs with.625 spacing. These terminal blocks are available in three
More informationCatalog Number Description
Catalog Number escription Enclosed Safety Switches Number Segment Character escription 2 N RB L=Light duty =General duty Fusible =eavy duty Type of Switch T=ouble throw U=General duty Non-Fusible U=eavy
More informationFuse Blocks and Clips
PGE Fuse and lock s OMNI-LOK Fuse lock...................................................................................... 484-486 Midget Fuse....................................................................................................
More informationNorth American Power Fuses
North American Power Fuses The most popular North American power fuses to meet the most popular protection priorities. Your problem: Today, you need a time-delay power fuse that can handle normal surges.
More informationVoltage Rating Current Rating Material. Connector. Catalog/ ordering number. Catalog/ ordering number. 1 of 6
Distribution Blocks Splicer Blocks Covers Description POWR-BLOKS TM power distribution blocks offer a safe, convenient way of splicing cables, providing a fixed junction tap-off point or splitting primary
More informationLFJ602003C 200A 600V Fus Block
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 LFJ602003C 200A 600V Fus Block Littelfuse Catalog Number Manufacturer Description Weight per unit Product Category Descriptions
More informationBlocks and Holders. Specifications. Voltage Rating 600 V Current Rating Based on NEC Table , using 75 C copper wire Material.
6Fuse Blocks and Holders Blocks and Holders Distribution Blocks Splicer Blocks Covers Description POWR-BLOKS TM power distribution blocks offer a safe, convenient way of splicing cables, providing a fixed
More informationVoltage Rating Current Rating Material. Connector CATALOG/ ORDERING NUMBER CATALOG/ ORDERING NUMBER. 1 of 6
Distribution Blocks Splicer Blocks Covers Description POWR-BLOKS TM power distribution blocks offer a safe, convenient way of splicing cables, providing a fixed junction tap-off point or splitting primary
More informationRed Spot Fuse Holders
Finger-safe Fuse Holders for BS88 HRC Industrial Fuses Description A range of CSA certified IP20 finger-safe fuse holders for BS88 HRC industrial fuses in rating up to 400A. Catalog Symbol RS(AMP)(Connection
More informationNon-Fused Load Break Switches FSSC, SX, SXDC, SC
Non-Fused Load Break Switches FSSC, SX, SXDC, SC UL 98 Non-Fused Load Break Switches Mersen disconnect switches are extremely durable, manually operated, non-fused disconnect switches. These heavy-duty
More informationRed Spot Fuse Holders
Finger-safe Fuse Holders for BS88 HRC Industrial Fuses Description A range of CSA certified IP20 finger-safe fuse holders for BS88 HRC industrial fuses in rating up to 400A. Catalog Symbol RS(AMP)(Connection
More informationUL/CSA Listed Power Fuses P F THE MOST POPULAR UL/CSA LISTED POWER FUSES TO MEET THE MOST POPULAR PROTECTION PRIORITIES
UL/CSA Listed Power uses THE MOST POPULAR UL/CSA LISTED POWER USES TO MEET THE MOST POPULAR PROTECTION PRIORITIES P Your problem: Today, you need a timedelay power fuse that can handle normal surges. Tomorrow,
More informationDisconnect Switches Type VBII (30-600A) with Flange Mounted Operating Handle
Features 30-600A, 600VAC and DC ratings UL Recognized (file # E121152 vol. 3) and CSA Certified under file number 15852 Visible blade quick make and break switching action Panel and Flange mounted assemblies
More informationPOWR-BLOKS. POWR-GARD Blocks and Holders Datasheet. Distribution Blocks Splicer Blocks Covers. Connectors. Ampere Ratings. Description.
Distribution Blocks Splicer Blocks Covers Connectors Box lug connectors are designed for use with a single, solid or class B or C stranded conductor. Use of more than one con ductor per connector opening
More informationCatalog Number Description
Catalog Number escription Enclosed Safety Switches Number Segment Character escription 2 N RB L=Light duty =General duty Fusible =eavy duty Type of Switch T=ouble throw U=General duty Non-Fusible U=eavy
More informationSelection and application guide
Selection and application guide 30A 400A fusible panelboards Coordination Panelboard www.usa.siemens.com/fusiblepanel Coordination panelboards Table of contents Subject Page Specifications 2-3 Enclosure
More informationEnclosed Rotary Switch Product Specification Sheets Table of Contents
Enclosed Rotary Switch Product Specification Sheets Table of Contents Catalog No. Sheet No. Order No. SSSS-ENRSW-1005 HNF3020CJ HNF3020CJE HNF3030CJ HNF3030CJE HNF3030CX HNF3060CJ HNF3060CJE HNF3060CX
More informationAmp-Trap 2000 Fuses FOR TYPE 2, NO DAMAGE CIRCUIT PROTECTION IN ALL THE CONFIGURATIONS YOU NEED. Class J / AJT...A2. AJT Reducer Fuses...
Amp-Trap 2000 Fuses FOR TYPE 2, NO DAMAGE CIRCUIT PROTECTION IN ALL THE CONFIGURATIONS YOU NEED. A Your problem: You need maximum overcurrent protection to prevent costly damage to today s highly sensitive
More informationFuseholders PAGE. Fuseholders.
PAGE International Shock-Safe (Panel Mount).......................................................................... 467-468 Flip-Top Shock-Safe (Panel Mount)..................................................................................
More informationUSCC & USM UltraSafe TM Fuseholders
USCC & USM UltraSafe TM Fuseholders UltraSafe modular fuseholders for midget and class CC fuses Mersen UltraSafe Modular Fuseholders introduce a new level of safety for Class CC (USCC) and Midget 1-1/2
More informationUltraSafe US22 Modular fuse-holders
UltraSafe US22 FUSE HOLDERS, FUSE BASES AND SUPPORTS UL/CSA FUSE HOLDERS FEATURES & BENEFITS The innovative and comprehensive UltraSafe range of Mersen fuse-holders. are finger-safe under IEC standards
More informationDistinctive Characteristics
Distinctive Characteristics Various cap styles and colors to meet differing application needs. Bright, full face illumination to distinctively indicate status. Rear panel threaded mounting or snap-in mounter
More informationTMC 91H is now TMC 60 C Series
TMC 91H is now TMC 60 C Series The new Thermal Magnetic Circuit Breaker is once again available and better than ever! The new version is not only UL recognized with the same electrical performance as the
More informationCatalog Number Description
Catalog Number escription Enclosed Safety Switches Number Segment Character escription 2 N RB L=Light duty =General duty Fusible =eavy duty Type of Switch T=ouble throw U=General duty Non-Fusible U=eavy
More informationHeavy Duty Safety Switches
eavy uty Safety Switches Class 3110 CONTENTS escription Class Page Application ata......................... 3110....................... 2-6 Technical ata........................... 3110........................
More informationPOWER TERMINAL BLOCKS
Terminal Blocks and Wiring Systems Catalogs > Industrial Controls Catalog > Terminal Blocks and Wiring Systems > Power Terminal Blocks POWER TERMINAL BLOCKS Introduction Standards Compliance High Fault
More informationNon-Fused Load Break Switches FSSC, SX, SXDC, SC
UL 98 Non-Fused Load Break Switches Mersen disconnect switches are extremely durable, manually operated, non-fused disconnect switches. These heavy-duty switches are designed with the most up-todate disconnect
More informationNorth American Power Fuses
North American Power Fuses THE MOST POPULAR NORTH AMERICAN POWER FUSES TO MEET THE MOST POPULAR PROTECTION PRIORITIES B Your problem: Today, you need a timedelay power fuse that can handle normal surges.
More informationFuse & Switch. BUCHANAN Terminal Blocks. Product Facts High Density Blocks. Fuse Blocks. Switch Blocks. Common Features of 300 & 0300 Series
Fuse & Switch Product Facts High Density n Fuse and Switch rated 15A and 300V. n High Density 0.36" [9.14] centerline spacing saves panel space; at least 33 circuits per foot. Fuse n Provide in-line circuit
More informationLoad Break Disconnect Switches FSLBS
Load Break Disconnect Switches FSLBS UL 508 Non-Fused Load Break Switches The FSLBS Load Break Switch is a newly designed industrial-grade switch capable of making or breaking loads up to 600V. It is suitable
More informationFull range of small dimension fast-acting and time-delay fuses
Electronic, PCB and small dimension fuses 3 Contents Product Catalog symbol/type Fuses C515, C519 time-delay 5x15mm fuses C518, C520 fast-acting C517 fast acting GDB, S500, S500-V fast-acting IEC 5x20mm
More informationN0N A 250V One-Time Class H Fuse
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-794 Fax: 936-560-4685 AllenWatson@elliottelectric.com N0N 250V One-Time Class H Fuse Catalog Number Manufacturer Description Weight per unit
More informationLow-Peak 600V Class RK1
LPS-RK 600Vac/300Vdc, 1 10-60A, Dual Element, Time-Delay Fuses Dimensions - in 5" (± 0.31) 5.5" (± 0.31) Available with easyid open fuse indication 1/10 to 30A 0.81" (±0.008) 35 to 60A 1.06" (±0.008) Description:
More informationBussmann. Circuit Protection Solutions
ussmann Circuit Protection Solutions ussmann Worldwide Circuit Protection Solutions World s leading supplier of fuses and fusible protection systems, ussmann continues its 88-year history of blazing new
More informationSW Tog DP 30A 120/277V Autogrd B&S WH
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 3032W SW Toggle DP 30A 120/277V Autogrd B&S WH Eaton Wiring Devices Catalog Number Manufacturer Description Weight per
More informationDatasheet AC Outlet DIN-Rail Mountable Receptacles
Datasheet AC Outlet DIN-Rail Mountable Receptacles DIN-rail receptacles, 5A, 15A and 20A power outlets, provide a convenient power source for portable computers or test devices for in-the-panel troubleshooting.
More informationDIN-Rail terminal blocks with ratings up to 200 ka SCCR. Multiple bridging options for point-of-use configuration. Connector products 10.
Connector products 10 DIN-Rail terminal blocks with ratings up to 200 ka SCCR Section page Description Compact rail and panel mount blocks NDN DIN-Rail and feed through blocks 2-3 N512, NFT2, NFT3, NC3,
More informationIndustrial Control Transformers
6 Industrial Control Transformers Section 6 Industrial Control Transformers provide a low and safe control voltage for the operation of electromagnetic devices, such as motor starters, contactors, solenoids
More information42.4. Terminal Blocks, Fuse Blocks and Fuse Holders. For Immediate Delivery or Tech Support call KMParts.com at (866)
.4 Terminal Blocks, Contents Description C383 Series Disconnect Fuse Holders...... C350 Series Fuse Blocks and W Series Fuse Holders.................. Page V7-T-129 V7-T-131 Overview Product Description
More informationBussmann series Quik-Spec Power Module Switch elevator disconnect
Supersedes January 2016 Agency information UL 98 enclosed and dead-front switch - Guide WIAX, WIAX7 (Canada), File E182262 culus, NEMA 1, UL 50, Listed enclosure cul per Canadian Standards C22.2, No. 0-M91-CAN/
More informationPlexPower Fused Factory Sealed Panelboard with Bus Bar Up to 30 Amps. Stainless Steel Enclosures
Applications The PlexPower panelboard provides indoor and outdoor protection and control of electrical circuits in hazardous environments such as: Petroleum plants Chemical plants Refineries Wastewater
More informationFull range of small dimension fast-acting and time-delay fuses. 5x15 mm 5x20 mm IEC 5x20 mm UL 1/4 x 5/8 1/4 x 7/8 1/4 x 1 1/4 x 1-1/4
Electronic, PCB and small dimension fuses 3 Contents Full range of small dimension fast-acting and time-delay fuses 5x15 mm 5x20 mm IEC 5x20 mm UL 1/4 x 5/8 1/4 x 7/8 1/4 x 1 1/4 x 1-1/4 PLUS PCB fuse
More informationHigh barriers Recognized by UL and cul Self-extinguishing materials Nonferrous material Corrosion-resistant nickel finish Safety-grip handle A complete line of switches is available for meter, relay, instrument,
More informationNon-Fused Load Break Switches FSSC, SX, SXDC, SC
Non-Fused Load Break Switches FSSC, SX, SXDC, SC UL 98 Non-Fused Load Break Switches Mersen disconnect switches are extremely durable, manually operated, non-fused disconnect switches. These heavy-duty
More informationF-Series. Circuit Breaker
F-Series Circuit Breaker The F-Series hydraulic/magnetic high amperage circuit breakers are designed to handle high current applications in extremely hot and/or cold locations. Due to its timeproven hydraulic/magnetic
More informationGJL 100 A Molded Case Circuit Breaker GJL 75 A Motor Circuit Protector
GJL 100 A Molded Case Circuit Breaker GJL 75 A Motor Circuit Protector Catalog 0500CT9702R409 2009 Class 525/580 CONTENTS Description............................................. Page General Characteristics...................................
More informationF-Series. Circuit Breaker
F-Series Circuit Breaker The F-Series hydraulic/magnetic high amperage circuit breakers are designed to handle high current applications in extremely hot and/or cold locations. Due to its timeproven hydraulic/magnetic
More informationFusetron FRN-R Class RK5 250Vac/125Vdc A, dual element, time-delay fuses
Technical Data1019 Supersedes July 2013 Fusetron FRN-R Class RK5 250Vac/125Vdc Catalog symbols: FRN-R-_ (non-indicating) FRN-R-_ID (indicating) Description: Eaton Bussmann series advanced protection, energy
More informationC E R T I F I C A T E O F C O M P L I A N C E
Issued to: ABB FRANCE ACTIVITE PROTECTION ET CONTROL 10 RUE AMPERE 69685 CHASSIEU CEDEX FRANCE This is to certify that representative samples of MOTOR CONTROLLERS, MAGNETIC See Addendum Pages Have been
More informationFuse Accessories. Bussmann - Fuse Holders. Fuse Holders
Bussmann - Fuse Holders HLQ UL Recognized, Guide IZLT2, File E14853 CSA Certified, Class 6225-01, File 47235 Fuse and knob are an integral one-piece unit. There are no replacement knobs (caps) HLQ carrier
More informationFUSES 8.1. Questions? Answers at Western US: CED-ELEV
FUSES Western US: -66 CED-ELEV or visit us online at www.cedelevator.com for 24 hour order entry, cross reference data base, product specifications with pictures and much more! Full line catalog available
More informationCatalog Number Description
Description Enclosed Safety Switches Segment Character Description D 2 N RB L=Light duty D=General duty Fusible H=Heavy duty Type of Switch DT=Double throw DU=General duty Non-Fusible HU=Heavy duty DTU=Double
More informationTA Ta VA CTRL-XFRMR
3804 South Street 7964-7263, TX Nacogdoches Phone: 936-69-7941 Fax: 936-60-468 TA2437 Ta-2-437 10VA CTRL-XFRMR Acme Electric Catalog Number TA2437 Manufacturer Acme Electric Description Control Transformer,
More information50,000 cycles minimum, resistive, inductive, tungsten filament lamp load (Fed Spec) 1.753" Depth x " Width x 2.375" Height
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 7842 40A 600V 2P Switch Pass & Seymour/Legrand Catalog Number 7842 Manufacturer Pass & Seymour/Legrand Weight per unit
More informationType EK 9F61 Series Medium Voltage Fuse Holders & Clips
Type EK 961 Series Medium Voltage use Holders & lips USE LOKS & HOLERS USE SUPPORTS, USE ISONNET SWITHES, AN AESSORIES ROM 2.4KV TO 38KV use supports, non-disconnecting, are used primarily in potential
More informationBulletin 1494V Variable Depth Flange-Mounted Disconnect Switches. Bulletin 1494F Fixed-Depth Flange-Mounted Disconnect Switches
2 Bulletin 1494 NEMA Disconnect Switches Section Overview Bulletin 1494V Variable Depth Flange-Mounted Disconnect Switches Open Type, Fusible 30 600 A Open Type, Non-Fusible 30 600 A Page 2-3 Bulletin
More informationPanelboards Circuit Breaker / Lighting and Distribution
Circuit Breaker / Lighting and Distribution 480Y/277 Vac Maximum 600Y/ 347 Vac (CSA only) Maximum 400 Ampere Mains 400 Ampere Maximum Branch UL Short Circuit Rating 200,000 A. @ 240 Vac / 100,000 A. @
More informationTechnical catalog February 2017 Low Voltage Switchboards and Panelboards UL/CSA
Technical catalog February 2017 Low Voltage Switchboards and Panelboards UL/CSA Table of Contents TPS NQ & AQ Series Overview 2 Switchboard Technical Data 3-5 Panelboard Technical Data 5-11 1 Tier Power
More informationCHCC_ (Class CC) CHM_ (UL midget/iec 10x38) CHPV_ (13/32 x 1-1/2 and 10x38 photovoltaic)
Supersedes August 2016 BUSSMANN SERIES Specifications: 2011/65/EU Volts 600 V (or less) UL 690 V (or less) IEC 1000 Vdc (or less) photovoltaic (PV) Amps 30 A UL 32 A IEC Short-Circuit Current Rating (SCCR)
More informationProduct Specification Sheet #3LD2.1
Product Specification Sheet #3LD2.1 Enclosed Non-Fusible Rotary Disconnect Switch 16 30 Amp, Type 12K Industrial and Type 4X Non-Metallic Enclosures General Information and Horsepower Ratings Shipping
More informationEVpack-fuse MEV55 BATTERY PACK FUSES FEATURES & BENEFITS APPLICATIONS
EVpack-fuse MEV55 BATTERY FUSES BATTERY PACK FUSES FEATURES & BENEFITS Design for applications Low watt losses High cycling performance Full coverage of battery module and current Ultra compact size Current
More informationDistinctive Characteristics
Distinctive Characteristics Carefully designed light diffusion and filtering system produce bright, full surface illumination with front panel relamping. Spot illumination available in single and bicolor
More informationConnector Installation Guide Compression and Mechanical Connectors
Connector Installation Guide Compression and Mechanical Connectors Typical Cross Section of a Compression Connector Before Installation Before compression, a typical cross section of cable consists of
More informationSolar Power Product SOLUTIONS GUIDE. Comprehensive photovoltaic protection
Solar Power Product Solutions SOLUTIONS GUIDE Comprehensive photovoltaic protection solar power Mersen Keeps it safe & reliable A global leader with a century of experience, Mersen brings expertise and
More informationMotor Circuit Breakers C4
Motor protection rating up to 100 Amps Short circuit breaking capacity up to 100kA Phase failure protection DIN rail mounting Wide range of accessories Options and ordering codes Model C4/32T Setting Short
More informationCHCC_ (Class CC) CHM_ (UL midget/iec 10x38) CHPV_ (13/32 x 1-1/2 and 10x38 photovoltaic)
Supersedes Janaury 2016 BUSSMANN SERIES Specifications: Volts 600V (or less) UL 690V (or less) IEC 1000Vdc (or less) photovoltaic (PV) Amps 30A UL 32A IEC Short-Circuit Current Rating (SCCR) 33kA photovoltaic
More informationType IMC Indoor current transformer
Instrument transformers Type IMC Indoor current transformer Product features 600 volt indoor 10 kv BIL 25 through 400 Hertz amperes: 50-1000 2.5" (64 mm) round window Designed for variable applications
More informationBlocks and Holders. In-Line Watertight Fuseholders. Applications. Benefits. Features. Specifications. w w w. l i t t e l f u s e.
Littelfuse 600 volt in-line watertight fuse holders are the ideal answer for all high humidity and corrosive environments where fuses are required. Available in both breakaway and non-breakaway, single
More informationUL 508 Non-Fusible Disconnect Switches
UL 508 Non-Fused (M163 M803) The M-series Load Break Switch is the most compact industrial-grade switch on the market. Capable of making or breaking loads up to 600V (UL), it is suitable as a motor disconnect.
More information6,3* 1,6 No Printed circuitboard Brass, Nickel plated MR 5-6 Y Yes Yes 5x20 &6x32
x20 and 6x32 Fuse sizes CLIPS FOR PRINTED CIRCUIT BOARD OR SCREW MOUNTING RATED CURRENT BELOW 30A* DEPENDING ON TYPE Main Characteristics Rated Power End Reference in box blister Catalog Size Current acceptance
More informationAccessories. Accessories. Meter Mounting Equipment
Covers & Sealing Rings..................................................................... 119 AW & H-Base Hubs.......................................................................... 119 Flush Trim
More information