Industrial Control Transformers
|
|
|
- Charity Morton
- 5 years ago
- Views:
Transcription
1 Industrial Control Transformers 5 The SBE - Encapsulated Series The SBE Encapsulated industrial control transformers are epoxy encapsulated to seal the transformer windings against moisture, dirt and industrial contaminants. Extra deep, molded terminal barriers reduce the chance of electrical failure as the result of arcing or frayed lead wires. The rugged construction and proven reliability of the SBE design is uniquely suited for all industrial environments. Features , 50/60 Hz suitable for worldwide applications. Interleaved copper windings reduce I 2 R losses and maximize efficiency. 55 C Rise, 105 C insulation system to minimize heat Epoxy encapsulated to protect cores and coils against moisture, dirt, and other contaminants. Meets or Exceeds NEMA Standard ST 1 and ANSI C89.1 for load inrush capability. Integrally molded, flame retardant (IEC 707/ISO Class 1210) Terminal Blocks provide greater terminal contact area and improved conductivity. Heavy gauge steel mounting plate Mounting dimensions are compatible with similar control transformers. Secondary fuse holders (FB2X) included for 13/32 x 1½ cartridges (fuses not included). Factory-installed fuse holders are available (See W, WA & WB options). 10 year warranty Related Products Linear Power Supplies DIN Rail DC Power Supplies Constant Voltage Transformers Line Reactors SBE Mounting Profiles Accessories Description Mounting Dimensions FBP Primary CC Rejection Type Fuse Holder (Finger Safe covers not available) FB2 Secondary Fuse Holder only (Glass or Ceramic, ¼ x 1¼ fuse) FB2X Secondary Fuse Holder only included where applicable. Not sold separately. (Midget Cartridge Type, 13/32 x 1½ fuse) FBPC1 Primary CC Rejection Type Fuse Holder and Finger Safe Cover Kit IP20 IEC Touchproof Cover Kit SBEDIN W IEC Fuse Holder Adaptor Kit Factory installed Primary Fuse Holder with (no covers) Profile Top View WA Factory installed Fuse Holder with Glass/Ceramic Type and Covers WB Factory installed Fuse Holder with and Covers 161
2 5 Industrial Control Transformers SBE Encapsulated Series Selection Tables Group x 240 Volt Primary, 24 Volt Secondary, 60 Hz Mtg Mtg 50 E050E / NA 2.02 / NA.20 x.33 /.20 x.33 3 (1.36) 75 E075E / / NA.20 x.50 /.20 x.50 4 (1.82) 100 E100E / / NA.20 x.50 /.20 x.50 5 (2.27) 150 E150E / / x.65 /.20 x.33 8 (3.64) 200 E200E / / x.65 /.20 x (4.55) 250 E250E / / x.65 /.20 x (5.00) 300 E300E / / NA.31 x.71 /.31 x (5.45) 350 E350E / / NA.31 x.71 /.31 x (6.82) 500 E500E / / NA.31 x.85 /.31 x (8.64) 750 E750E / / x.85 /.31 x (14.09) Note: Includes FB2X Secondary fuse holder. Group 1A Factory Installed Primary Fuse Holder Class "CC" and: W - Secondary Fuse Holder (Midget Cartridge, 13/32 x 1½ fuse) supplied, no covers WA - Secondary Fuse Holder (Glass or Ceramic - Type 3AG, ¼ x 1¼ fuse type) WB - Secondary Fuse Holder (Midget Cartridge, 13/32 x 1½ fuse) W - Primary Fuse Holder Class "CC" WA - Type 3AG w/ Covers WB - Midget Type w/ Covers Mtg Dimensions Mtg 50 E050EW E050EWA E050EWB / NA 2.02 / NA.20 x.33 /.20 x.33 3 (1.36) 75 E075EW E075EWA E075EWB / / NA.20 x.50 /.20 x.50 4 (1.82) 100 E100EW E100EWA E100EWB / / NA.20 x.50 /.20 x.50 5 (2.27) 150 E150EW E150EWA E150EWB / / x.65 /.20 x.33 8 (3.64) 200 E200EW E200EWA E200WB / / x.65 /.20 x (4.55) 250 E250EW E250EWA E250EWB / / x.65 /.20 x (5.00) 300 E300EW E300EWA E300EWB / / NA.31 x.71 /.31 x (5.45) 350 E350EW E350EWA E350EWB / / NA.31 x.71 /.31 x (6.82) 500 E500EW NA E500EWB / / NA.31 x.85 /.31 x (8.64) 750 E750EW NA E750EWB / / x.85 /.31 x (14.09) Notes: WA and WB suffix include Finger Safe covers. Fuses not included. FB2 sold separately for W option. Secondary fusing assembly required. Secondary Fusing W WA Glass/Ceramic - Type 3AG (FB2) SBE Control Transformer without Covers - W SBE Control Transformer with Covers - WA & WB WB (FB2X) 162
3 Industrial Control Transformers 5 SBE Encapsulated Series Selection Tables Group x 440 Volt Primary, 110 Volt Secondary, 50/60 Hz 230 x 460 Volt Primary, 115 Volt Secondary, 50/60 Hz 240 x 480 Volt Primary, 120 Volt Secondary, 60 Hz Mtg Mtg 50 E / NA 2.02 / NA.20 x.33 /.20 x.33 3 (1.36) 75 E / / NA.20 x.50 /.20 x.50 4 (1.82) 100 E / / NA.20 x.50 /.20 x.50 5 (2.27) 150 E / / x.65 /.20 x.33 8 (3.64) 200 E / / x.65 /.20 x (4.55) 250 E / / x.65 /.20 x (5.00) 300 E / / NA.31 x.71 /.31 x (5.45) 350 E / / NA.31 x.71 /.31 x (6.82) 500 E / / NA.31 x.85 /.31 x (8.64) 750 E / / x.85 /.31 x (14.09) 1000 E / / x.85 /.31 x (16.36) Note: Includes FB2X Secondary fuse holder. Group 2A Factory Installed Primary Fuse Holder Class "CC" and: W - Secondary Fuse Holder (Midget Cartridge, 13/32 x 1½ fuse) supplied, no covers WA - Secondary Fuse Holder (Glass or Ceramic - Type 3AG, ¼ x 1¼ fuse type) WB - Secondary Fuse Holder (Midget Cartridge, 13/32 x 1½ fuse) W - Primary Fuse Holder Class "CC" WA - Type 3AG w/ Covers WB - Midget Type w/ Covers Mtg Dimensions Mtg 50 E050W E050WA E050WB / NA 2.02 / NA.20 x.33 /.20 x.33 3 (1.36) 75 E075W E075WA E0750WB / / NA.20 x.50 /.20 x.50 4 (1.82) 100 E100W E100WA E100WB / / NA.20 x.50 /.20 x.50 5 (2.27) 150 E150W E150WA E150WB / / x.65 /.20 x.33 8 (3.64) 200 E200W E200WA E200WB / / x.65 /.20 x (4.55) 250 E250W E250WA E250WB / / x.65 /.20 x (5.00) 300 E300W E300WA E300WB / / NA.31 x.71 /.31 x (5.45) 350 E350W E350WA E350WB / / NA.31 x.71 /.31 x (6.82) 500 E500W E500WA E500WB / / NA.31 x.85 /.31 x (8.64) 750 E750W E750WA E750WB / / x.85 /.31 x (14.09) 1000 E1000W E1000WA E1000WB / / x.85 /.31 x (16.36) Notes: WA and WB suffix include Finger Safe covers. Fuses not included. W option for secondary fusing requires assembly (FB2 sold separately). Secondary Fusing WA Glass/Ceramic - Type 3AG (FB2) W SBE Control Transformer without Covers - W SBE Control Transformer with Covers - WA & WB WB (FB2X) 163
4 5 Industrial Control Transformers SBE Series Selection Tables - continued Group x 480 Volt Primary, 24 Volt Secondary, 60 Hz Mtg Mtg Slot Size (inches) 50 E050D /NA 2.02/N/A.20 x.33 3 (1.36) 100 E100D / /NA.20 x.50 5 (2.27) 250 E250D / / x (5.00) 500 E500D / /NA.31 x (8.64) Note: Includes FB2X Secondary fuse holder. Group 4 208/240/277 Volt Primary, 120/24 Volt Secondary, 60 Hz Mtg Mtg Slot Size (inches) 50 E050JL /NA 2.02/N/A.20 x.33 3 (1.36) 100 E100JL / /NA.20 x.50 5 (2.27) 250 E250JL / / x (5.00) 500 E500JL / /NA.31 x (8.64) Note: Will only accept one FB2 secondary fuse holder. Will not accept FB2X secondary fuse holder. Group 5 208/240/480/600 Volt Primary, 120/24 Volt Secondary, 60 Hz 200/230/460/575 Volt Primary, 115/23 Volt Secondary, 60 Hz Mtg Mtg Slot Size (inches) 50 E050JN / /NA.20 x.50 4 (1.81) 100 E100JN / / x.65 8 (3.67) 150 E150JN / / x (5.00) 250 E250JN / /NA.31 x (6.82) 500 E500JN / / x (13.64) Note: Will only accept one FB2 secondary fuse holder. Will not accept FB2X secondary fuse holder. 164
5 Industrial Control Transformers 5 SBE Accessories (For Group 1 & 2 voltage configurations only) FBP: Field installed primary fuse holder kit designed to accommodate two Class CC rejection type fuses. Finger safe covers not available. FB2: Field installed secondary fuse holder kit designed to accommodate one Glass or Ceramic, ¼ x 1¼ fuse. SBEDIN: Field installed IEC Fuse Holder Adaptor Kit See the Technical Notes section for recommended fuse sizes. FBPC1: Field installed primary fuse holder designed to accommodate two Class CC rejection type fuses with Primary and Secondary Finger Safe Covers Kit. FB2X: Field installed secondary fuse holder designed to accommodate one 13/32 x 1½ (Midget type) cartridge fuse (included with applicable transformer purchase only). IP20: Field installed Primary and Secondary IEC Touch Proof Cover Kit. FBP Fuse Block - Primary Side FBPC1 Fuse Block and Finger Safe Cover Kit Primary Side FBPC1 Secondary Cover - For use with either FB2X or FB2 options. FB2X FB2 Secondary Side Order FB2 separately 165
6 5 Industrial Control Transformers SBE Additional Accessories - continued FB2 Fuse Block - Secondary Side FB2X Fuse Block - Secondary Side SBE DIN Circuit Breaker Mounting IP20 Terminal Covers (Two Covers Per Kit) 166
Industrial Control Transformers
The SBE - Encapsulated, Copper Wound Series The SolaHD SBE Encapsulated industrial control transformers are epoxy encapsulated to seal the transformer windings against moisture, dirt and industrial contaminants.
Drive Isolation & Protection
Drive Isolation & Protection 2 Drive Isolation Transformers: 7.5 440, Three Phase Special s and Sizes for Drive Applications For SCR (Silicon Control Rectifier) variable speed motor drive applications,
Industrial Control Power Transformers Class MT
Class MT Features Epoxy-encapsulated (50 5000); Completely seals the transformer coils against moisture, dust, dirt and industrial contaminants for maximum protection in hostile and industrial environments
Industrial Control Power Transformers
09/10/15 Class MT Features b Enclosed coils (50-5000); Completely encloses the transformer coils against moisture, dust, dirt and industrial contaminants for maximum protection in hostile and industrial
ICT TRANSFORMERS. Industrial Control Transformers provide a low and safe control voltage for the operation of many electromagnetic devices
ICT TRANSFORMERS Industrial Control Transformers provide a low and safe control voltage for the operation of many electromagnetic devices TA SERIES INDUSTRIAL CONTROL TRANSFORMER Industrial control transformers
Industrial Control Transformers
6 Industrial Control Transformers Section 6 Industrial Control Transformers provide a low and safe control voltage for the operation of electromagnetic devices, such as motor starters, contactors, solenoids
PH250MQMJ CNTL 250VA 240X X240
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 PH250MQMJ CNTL 250VA 240X480-120X240 Hammond Power Solutions Catalog Number Manufacturer Description Weight per unit Product
Engineered solutions for power and the environment
C e n t u ry S e r i e s I n d u s t r i a l C o n t r o l T r a n s f o r m e r s Engineered solutions for power and the environment s we celebrate our 100th nniversary, the Dongan Team wishes to thank
CPT Series Control Transformers
CPT Series Control s 50 VA to 500 VA 480 VAC Primary 120 VAC Secondary (Inrush VA data should be obtained from the device manufacturers.) The inrush load power factor is difficult to determine without
Machine Tool Industrial Control Transformers
Hammond Power Solutions Inc. Page of Machine Tool Industrial Control Transformers The HPS Imperator TM series of machine tool rated industrial control transformers are specifcally designed to meet high
Industrial Control Transformers
Industrial Control Types MTE and MTK.1 Standards and Certifications................................. Catalog Selection.................................. Type MTE...............................................
Type FEC Epoxy Encapsulated, Copper-Wound Industrial Control Transformers
Type FEC Epoxy Encapsulated, Copper-Wound Transformers ISO 900:2008 REGISTERED 0 Transformer Selector Guide Type FEC Transformers...Page 02 Primary Fusing Option...Page 07 Primary Overcurrent Selection...Page
Machine Tool Industrial Control Transformers
Hammond Power Solutions Inc. Page of Machine Tool Industrial ontrol Transformers The HPS Imperator TM series of machine tool rated industrial control transformers are specifcally designed to meet high
50 Series. Features. Suffix Suffix Series Voltage Combinations
Features C 50 Combinations Suffix -052 x 24 ll Copper Windings Rugged coil mounted screw terminals UL Class 105 C insulation system, 55 C temperature rise through 750 UL Class 10 C insulation system, C
Class I Division 2. 1 to 25 kva. Applications. Specifications. Standards. Options and Accessories. Features, Functions, Benefits.
Class I Division 2 10 1 to 25 kva Applications n Class I Division 2 units are used in hazardous locations to maintain a safe environment. Specifications n Class I Division 2, Groups A, B, C, D n T3C temperature
HPS Imperator. Innovative Solutions. Progressive. Encapsulated Machine Tool Industrial Control Transformers
Progressive Innovative Solutions HPS Imperator Encapsulated Machine Tool Industrial Control Transformers Lifetime Warranty Unique Terminal Block Innovative Fusing Method Patented Design HPS Imperator Control
Single-Phase Ventilated
Single-Phase Ventilated 1 15 to 1,650 kva Applications n For general loads, including lighting, industrial and commercial applications Specifications n Meets DOE-2016 and C802 standards for energy efficiency
Product presentation CPT tech Jason Evershed, ABB Transformer Components, May 21st Dry-type transformers Innovative Technology
Product presentation CPT tech Jason Evershed, ABB Transformer Components, May 21st 2014 Dry-type transformers Innovative Technology What is a dry transformer? ABB manufactures a transformer which does
PRODUCTS: POWER SUPPLY
PRODUCTS: POWER SUPPLY Impact Lighting Inc. All rights reserved. Impact Lighting Inc. Reserves the right to change specifications without notice. 138 POWER SUPPLY 15W AC-DC [12V/1.25A] UNIVERSAL POWER
Zero-phase current transformer for F-MPC application. Notification of geometry change in EW Series
To All Customers Rep No. B16002 April 19, 2016 Fuji Electric FA Components & Systems Co., Ltd. Zero-phase current transformer for F-MPC application Notification of geometry change in EW Series Thank you
HPS Imperator Encapsulated Industrial Control Transformer
HPS Imperator Innovative Design The Perfect Solution Features and enefits The HPS Imperator series is a unique innovative and compact design that provides the ideal solution for any industrial control
HPS Imperator. Innovative Solutions. Progressive. Encapsulated Machine Tool Industrial Control Transformers
Progressive Innovative Solutions HPS Imperator Encapsulated Machine Tool Industrial Control Transformers Lifetime Warranty Unique Terminal Block Innovative Fusing Method Patented Design HPS Imperator Control
Transformers 6. Gross Automation (877)
Transformers 6 Hevi-Duty Family of Transformers Sola/Hevi-Duty offers a broad range of transformers to meet many applications. These dry-type transformers are offered encapsulated, ventilated or non-ventilated,
AIR CORE REACTORS. Phoenix Electric Corporation
AIR CORE REACTORS Phoenix Electric Corporation PHOENIX ELECTRIC CORPORATION designs and manufactures Dry Type Air Core Reactors for operation on systems rated through 800 kv. All reactors are custom designed
Fuseholders Enclosed Fuseholders > Circuit Board Mounted. Shock-Safe Holder (Circuit Board Mounted) Product Characteristics.
Fuseholders Enclosed Fuseholders > Circuit Board Mounted Pb Shock-Safe Holder (Circuit Board Mounted) Product Characteristics Dimensions.68" 1.77".44".20".24".040".49".48".12" Compatible Fuse Types Description
ENCAPSULATED TRANSFORMERS FOR HAZARDOUS LOCATIONS
Hammond Power Solutions Inc. Page 1 of 1 ENCAPSULATED TRANSFORMERS FOR HAZARDOUS LOCATIONS HPS Titan has been designed to operate in harsh environments/hazardous locations where dangerous gases, liquids,
TA Ta VA CTRL-XFRMR
3804 South Street 7964-7263, TX Nacogdoches Phone: 936-69-7941 Fax: 936-60-468 TA2437 Ta-2-437 10VA CTRL-XFRMR Acme Electric Catalog Number TA2437 Manufacturer Acme Electric Description Control Transformer,
Midwest Dry Type Transformers
Midwest Electric Products Midwest Dry Type Transformers Reliable and Efficient Performance From a Name You Know DOE 2016 Efficiency Transformers Catalog General Information...2 General Purpose... 3 Single-Phase
Transformer Disconnects
Catalog April 05 Class 9070 CONTENTS Description..............................................Page Introduction................................................. 3 Standard Features............................................
EMPAC Metal enclosed capacitor bank for wind applications
EMPAC Metal enclosed capacitor bank for wind applications Introduction The EMPAC is a Metal Enclosed Capacitor Bank suitable for voltages between 1 kv and 36 kv for reactive compensation in MV networks
Transformer Disconnects
Disconnects For Control Panel Lighting and Auxillary Power UL and CUL Listed TÜV Rheinland Licensed CE Marked Series Electric Manufacturing Company Table of Contents TDLK Series NEMA 1-12... 3-4 TDEK Series
Three-Phase Ventilated
Three-Phase Ventilated 2 15 to 2,500 kva Applications n For general loads, including lighting, industrial and commercial applications Specifications n Meets DOE-2016 and C802 standards for energy efficiency
2 SLR Series Line Reactors... 50
Drive Isolation & Protection Line Reactors Drive Isolation Transformers 2 SLR Series Line Reactors... 50 Drive Isolation Transformers... 51 Selection Table and Design Styles... 52 Electrical Connections...
Transformer Disconnects Specifying Product Catalog Numbers
SPECIFYING PRODUCT CATALOG NUMBERS Transformer Disconnects Specifying Product Catalog Numbers When ordering, specify the following information: Class, Type, VA rating, Enclosure, Voltage code, and Form(s).
Control Circuit Transformers
Technical Data Control Circuit Transformers Bulletin Numbers 1497, 1497A, 1497B, 1497D Topic Page Summary of Changes 1 Control Circuit Transformers Product Overview 2 Bulletin 1497 Global Control Circuit
Bulletin 109 IEC Non-Reversing Starters. Product Overview/Product Selection. Table of Contents
Bulletin IEC Non-Reversing Starters Product Overview/Product Selection Cat. No. -CABAF--R-P IP (Type ) Metal Enclosure with Lift-off Cover Bulletin IEC Non-Reversing Starters Impact-resistant molded enclosures
AM-Tite Series Non-Metallic Plugs MSR Series Switched and Interlocked Receptacles
AM-Tite Series Non-Metallic Plugs MSR Series Switched and Interlocked Receptacles Compatible with UL 1686 C1 Pin & Sleeve Devices Safer. Easier. Better. MENNEKES Non-Metallic MSR Switched and Interlocked
Metal-Enclosed Switches. Medium Voltage. Medium Voltage Metal-Enclosed Switches Contents
January 2003 Vol. 1, Ref. No. [1011] -1 Medium Voltage Metal-Enclosed Switches Contents Description Page MVS................................... -2 and Breaker MSB........................ -3 Metal-Enclosed
Solid-State Relays. Solid-State Relays. Features. Description. Overview
Features Rugged, epoxy encapsulation construction 4,000 volts of optical isolation Subjected to full load test and six times the rated current surge before and after encapsulation Unique heat-spreader
Fuseholders. Introduction
Introduction Fuseholders Bulgin s extensive range of fuseholders are designed to give the degree of protection demanded in today s sophisticated electronic equipment. Carrying world-wide safety approvals
Three Phase Transformers
Three Phase Transformers ontents Three Phase - General Purpose... 26 Three Phase - General Purpose Scott ed... 30 Three Phase - dditional ombinations vailable... 31 Three Phase - ion Diagrams... 32 Series
NEMA 1 ( IP23 ) NEMA 12 ( IP54 ) Spec-Tech Industrial Electric
NEMA 1 ( IP23 ) NEMA 12 ( IP54 ) Celebrate Our 100th Anniversary With Us Table of Contents TDL Series NEMA 1-12... 3-4 TDE Series NEMA 1-12.... 5-6 TDA Series NEMA 1-12.... 7-8 Auxiliary Power TLA Series
Solid-State Relays. Solid-State Relays. Features. Description. Overview
Features Rugged, epoxy encapsulation construction 4,000 volts of optical isolation Subjected to full load test and six times the rated current surge before and after encapsulation Unique heat-spreader
General Purpose Buck - Boost Wiring Diagrams... 86
SECTION LOW VOLTAGE/ LIGHTING TRANSFORMERS General Purpose... 84 Buck - Boost... 85 Wiring Diagrams... 8 LOW VOLTAGE LIGHTING TRANSFORMERS & POWER SUPPLIES Low Voltage Lighting A greater selection for
DIN HV Distribution. DIN HV fuses are partial-range high voltage currentlimiting fuses for use in distribution circuits from kV.
DIN HV Distribution DIN HV fuses are partial-range high voltage currentlimiting fuses for use in distribution circuits from 2.3-38kV. Their compact dimensions and non-venting characteristics make them
Capacitors. Individual & fixed bank. Individual & fixed capacitor banks. Low Voltage Network Quality
Individual & fixed capacitor banks Low Voltage L O W V O L T A G E N E T W O R K Q U A L I T Y Individual & fixed bank Capacitors Description High reliability Well proven features of ABB dry type power
Medium Voltage Metal-Enclosed Switches
Medium Voltage Metal-Enclosed Switches Outdoor Medium Voltage Switch.1 Introduction Product Selection Guide....................................2 Medium Voltage Switch MVS Product Description......................................
Outdoor live tank SF6 circuit breaker EDT with integrated current transformer up to 72.5 kv
Outdoor live tank SF6 circuit breaker EDT with integrated current transformer up to 72.5 kv SF6 circuit breaker EDT with integrated current transformer ABB is a world leader in live tank circuit breaker
Selection Guide. Control Circuit and Load Protection
Selection Guide Control Circuit and Load Protection Circuit Protection Portfolio 1489-M Circuit Breakers Approved for branch circuit protection in the United States and Canada, and certified as Miniature
% ^ ) 4/2 SERIES. Direct Mount. Direct Acting Direct Mount Pilot Valves. Brass or Stainless Steel Bodies 1/4" NPT. Features. Construction.
Direct Acting Direct Mount Pilot Valves Brass or Stainless Steel Bodies /" NPT / 83 Direct Mount Features NAMUR direct mount version of the rugged, dependable 83 Series valves Direct acting, high flow
Type SJK Test Switches
Type SJK Test Switches No-barrier design Self-extinguishing materials Front-connected, back-connected and flush-mounted styles Blades operate independently or can be ganged together DESCRIPTION STATES
90 kva Transformer - 208Y Wye-N Primary Voltage - 230Y Wye-N Secondary Voltage - NEMA 3R
90 kva Transformer 208Y WyeN Primary Voltage 230Y WyeN Secondary Voltage NEMA 3R Part #: MT208Y90KVA230Y3P Page: 1 The MT208Y90KVA230Y3P 208Y 3 Phase Energy Efficient Transformer from Larson Electronics
PPT 802, Proximity Probe Transducer System
PPT 802, Proximity Probe Transducer System PPH 080 : Proximity Probe Head PEC 036 : Probe Extension Cable PRD 020 : Proximity Probe Driver Feature Non-contacting measurement system based on eddy current
FUSEHOLDERS. Type Fuse Size (mm) Page. Type Fuse Size (mm) Page
Bulgin s extensive range of fuseholders are designed to give the degree of protection demanded in today s sophisticated electronic equipment. Carrying world-wide safety approvals from UL, VDE, CSA, SEMKO
Miscellaneous. Unit Substation 600 Volts and Below. Sealed Mini Power-Zone Transformers Industrial Control
Table of Contents Section General Purpose Dry Type 600 Volts and Below General Purpose Transformer, see page -2 Sealed Transformer, see page -10 90701050D2 Industrial Control Transformer, see page - EE
Bulletin A 1497B 1497D Type Control Circuit Transformer Machine Tool Transformer Control Power Transformer General Purpose Transformer
Bulletin, A, B, D Transformers Product Overview Transformers Bulletin A B D Type Control Circuit Transformer Machine Tool Transformer Control Power Transformer General Purpose Transformer Features Single,
Limitor -G General Purpose Fuses
Limitor -G General Purpose Fuses HIGH VOLTAGE IEC FUSES DIN HV GENERAL PURPOSE FUSES FOR TRANSFORMERS FEATURES & BENEFITS Mersen HV fuse-links have been used for reliable protection in high-voltage switchgear
Mfg. Part No.* VA ACCESSORIES
Find Datasheets Online CONTROL HPS IMPERATOR MACHINE TOOL INDUSTRIAL CONTROL Up to 100VA 00V class 50/0 Hz Superior insulation system Constructed with high quality silicon steel laminations PRIMARY: 240/480,
CX1 ProVector Explosion-Proof Heaters
Explosion-Proof Heaters For hazardous locations heating, rely on the for the most dependable, troublefree service available. CCI Thermal Technologies Inc. manufactures explosion-proof air heaters to satisfy
HPS Imperator Machine Tool Industrial Control Transformer
HPS Imperator Machine Tool Industrial ontrol Transformer The Perfect Solution The HPS Imperator line of machine tool industrial control transformers are specifically designed to meet the high inrush industrial
HPS Fusion General Purpose Enclosed Transformer
HPS Fusion General Purpose Enclosed Transformer Our Company Hammond Power Solutions (HPS) was established in 1917 in Guelph, Ontario and has grown from a small family owned business in the short wave radio
FUSEHOLDERS. Type Fuse Size (mm) Page. Type Fuse Size (mm) Page
Bulgin s extensive range of fuseholders are designed to give the degree of protection demanded in today s sophisticated electronic equipment. Carrying world-wide safety approvals from UL, VDE, CSA, SEMKO
SOLENOID VALVES AND PNEUMATIC VALVES
S E R I E S P Directly operated mini-solenoid valves Series P 3/ way N.C. or N.O. Ports M5 (for single base) Cartridge ø 3 and 4 (for manifold) Note: All the serie P electrovalves are basic in DC. For
Modifiable TITAN Horizontal Motors Accessories and Modifications
36. Rotor, Standard And Optional Construction Standard rotor construction of 449, 5000 and 5800 frame TITAN products is typically die-cast aluminum. 720 RPM and slower is typically fabricated aluminum.
Totally Enclosed Non-Ventilated
5 15 to 500 kva 5 Applications n Designed for commercial and industrial loads in challenging environments Specifications n NEMA3R rated enclosure n Single Phase units 15 through 100 kva n Three Phase units
75 kva Transformer - 480V Delta Primary - 208Y/120 Wye-N Secondary - NEMA 3R - K-13 - Copper Winding
75 kva Transformer 480V Delta Primary 208Y/120 WyeN Secondary NEMA 3R K13 Copper Winding Part #: MTK13FP3P480D75KVA208Y.120N3RESCU Page: 1 The MTK13FP3P480D75KVA208Y.120N3RESCU 480 V Delta 3 Phase Energy
Fuseholders PAGE. Fuseholders.
PAGE International Shock-Safe (Panel Mount).......................................................................... 467-468 Flip-Top Shock-Safe (Panel Mount)..................................................................................
HPS Imperator Series Control Transformers meet or exceed the standards established
HPS IMPRATOR HPS Imperator Machine Tool Industrial ontrol Transformer The Perfect Solution The HPS Imperator line of machine tool industrial control transformers are specifically designed to meet the high
Engineering Information. Solenoid Valves Principles of Operation. Solenoid Valves. Direct Acting Valves (Figures 1A, 1B)
4 Engineering Information Principles of Operation A solenoid valve is a combination of two basic functional units: A solenoid (electromagnet) with its core A valve body containing one or more orifices
Motors Automation Energy Transmission & Distribution Coatings. GPH2 Combination Soft Starters
Motors Automation Energy Transmission & Distribution Coatings GPH2 Combination Soft Starters GPH2 Combination Soft Starter 5to 350 HP The Combination Soft Starter is a NEMA 4/12 Enclosed industrial general
Control & Power, Inc
Way/ 2 and 3 Position Four ported valves are generally used to operate double-acting cylinders or actuators. They have four or five pipe connections, commonly called ports: One pressure inlet. Two cylinder
SafeGear TM Motor Control Center Arc resistant metal-clad construction Motor Control Center Descriptive bulletin
SafeGear TM Motor Control Center Arc resistant metal-clad construction Motor Control Center Descriptive bulletin Contents 1. Introduction 2 2. Product highlights 2 3. Available configuration/competitive
Bulletin 1497A Machine Tool Transformers
Bulletin A Overview/Catalog Number Explanation Bulletin A Bulletin A are designed to reduce supply voltages to control circuits. The complete line of transformers is available with optional factory-installed
HHD. High Voltage Fuses German DIN Standard. The temperature limiting function of the fuse striker pin. Design and construction.
HHD High Voltage Fuses German DIN Standard For Air & Gas Insulated Switchgear Indoor and Outdoor Application The striker pin system is connected by means of a high resistance parallel conductor. After
Distribution transformers Efficiency over life-cycle
Distribution transformers Efficiency over life-cycle ABB a global leader ABB is a global leader in Power and Automation technologies that enable utility and industry customers to improve performance while
Medium Voltage Metal-Enclosed Switches
Medium Voltage Metal-Enclosed Switches Outdoor Medium Voltage Switch.1 Medium Voltage Switch MVS Product Description............................................. 2 Application Description..........................................
Longest Life Product for Electric Furnace Applications! 100,000 Operations No Routine Maintenance Required!
DB 750-205 January 2007 Supercedes: December 2006 Now available with Vacuum Interrupter Monitor VBT Switch 15kV - 69kV VBU-T Switch 69kV - 230kV Longest Life Product for Electric Furnace Applications!
Solenoid System KNURLED NUT TOP CORE GUIDE TUBE PLUNGER
EVI 7 S8 Solenoid System COIL The EVI7 S8 system by AMISCO includes a wide range of solenoid operators designed for pneumatic valves. All solenoids of this system have the guide tube with a diameter of
Turbogenerators. With Top Performance for Steam and Gas Applications. Specifically tailored 4-pole Synchronous Turbogenerators
Turbogenerators With Top Performance for Steam and Gas Applications Specifically tailored 4-pole Synchronous Turbogenerators siemens.com / automation 2 Top Performance Turbogenerators for Steam and Gas
1492-CB 1492-GH 1492-GS
1 The Allen-Bradley Line of Devices Allen-Bradley offers 3 different lines of Circuit Breakers (Supplementary Protectors) and a line of branch circuit rated Fuse Holders. Allen-Bradley Thermal Magnetic
Fuse holders and fuses
Modular size for 10x38, 14x51 and 22x58mm fuses Finger safe - IEC IP20 degree of protection against accidental contact with live parts and with sealable cover for operators safety Version with status indicator
Type MTS Miniature Test Switches
Type MTS Miniature Test Switches o o o o Compact and versatile Front- and back-connected styles Safe, durable, rugged and reliable Recognized by CUL & UL DESCRIPTION In many panelboard, switchgear, metering,
Individual & fixed bank capacitors
Individual & fixed bank capacitors L O W V O L T A G E N E T W O R K Q U A L I T Y Description High reliability Well proven features of ABB dry type power factor cor rection capacitor tech nology are incorporated
Isolating transformer DS0107. Three-phase isolating transformers for the supply of three-phase loads in medical locations
Three-phase isolating transformers for the supply of three-phase loads in medical locations DS0107_D00105_00_D_XXEN/05.2015 Three-phase isolating transformers for the supply of three-phase loads in medical
3VF3 to 3VF8 Circuit-Breakers
3VF3 to 3VF8 Circuit-Breakers Accessories Operating mechanisms For other s for 3VF3 with knob Rotary drive, complete, scope of supply Cubicle door for 3VF6 Motor operating mechanism for 3VF3 Motor operating
D I D /240 I. D x /240 I D / x x /24 I. D x /120
ndustrial ontrol Transformers lass 9070 www.square.com or the most up-to-date information The T units are designed for the global market and are the best choice when size and cost are of concern. This
Control Transformers
ontrol Transformers HPS Imperator TM, QE, MV Series Industrial ontrol Transformers ontrol Transformer Quick Selection harts... 0 What Is A ontrol Transformer?... ontrol Transformer Selection Guide... HPS
Thermal Arc Professional: when welding is your business. Introducing the Portafeed VS 212. Portafeed VS 212
Thermal Arc Professional: when welding is your business Thermal Arc is on the move! The Thermal Arc family of arc welding equipment has been completely overhauled, re-engineered and expanded following
DRY TYPE TRANSFORMERS
DRY TYPE TRANSFORMERS Single-phase, Three-phase/Single-phase, Three-phase/Two-phase,Three-phase 1.1 kv to 7.2kV Class Dry Type Transformers Transformers meant to be installed in a dry and air conditioned
Control Transformers
J., APRJL, 1983 SUP RSEPES1/8111TION Control Transformers FILE: Control Products Catalog Machine Tool Transformer Disconnects CONTENTS Description Class Pages General............ 97... 23 Application Data.........
Technical Data. Low Voltage Regulation System LVRSys. Flexible solution for power utilities. Voltage stabilization for industrial grids
Technical Data Low Voltage Regulation System LVRSys 1 Power range: 7.5 kva up to 3150 kva 1 Regulation: single- or three-phase 1 Regulation ranges: ± 6 % to ± 24 % 1 Overall efficiency: 99.4 % to 99.8
45 kva Isolation Transformer - 480V Delta Primary - 400V Delta Secondary - N3R - Copper Windings
45 kva Isolation Transformer 480V Delta Primary 400V Delta Secondary N3R Copper Windings Part #: MTDOE163P480D45KVA400DN3RCU Page: 1 The MTDOE163P480D45KVA400DN3RCU 480D 3 Phase Energy Efficient Isolation
Distribution Dry Type Transformers 600 Volts Class Single and Three Phase Selection
7 Distribution Dry Type Transformers 600 Volts Class Single and Three Phase 600 Volts Class Single Phase 0.25 167 KVA Three Phase 3 1000 KVA Features Standard units are UL listed and are designed in accordance
Leadership in Circuit Protection
Leadership in Circuit Protection Bussmann is now a part of Eaton Learn more at Eaton.com/Cooper Leadership in Circuit Protection. The only company that can provide a complete circuit protection solution
5kV to 38kV, 630 Amp to 4000 Amp Indoor or Outdoor Application
The most advanced Arc-Resistant Switchgear, designed and built to provide maximum safety in the event of an Internal Arcing Fault. 5kV to 38kV, 630 Amp to 4000 Amp Indoor or Outdoor Application Page 1
MIRUS International Inc. TYPICAL SPECIFICATION ULLTRA & ULLTRA-H1E 31 Sun Pac Blvd., Brampton, Ontario, Canada L6S 5P6
I. PART 1 GENERAL 1. SCOPE A. NEMA Premium copper-wound ultra low loss isolation transformer with a higher efficiency than that required by NEMA Std. TP-1. Optimized for energy efficiency over a wide load
Outdoor live tank vacuum circuit breaker Type OVB-VBF for 24/36/40.5 kv applications
Outdoor live tank vacuum circuit breaker Type OVB-VBF for 24/36/40.5 kv applications ABB a global leader ABB is a global leader in power and automation technologies that enable utility and industry customers
PLATINUM SERIES SWITCHBOARD METERS
PLATINUM SERIES SWITCHBOARD METERS www.sifamtinsley.co.uk DATASHEET E471457 Multifunction Meters Transducers & Isolators PLATINUM SERIES SWITCHBOARD METERS Temperature Controllers Converters & Recorders
Page 12-2 Page Page Page DC FUSES FOR PHOTOVOLTAIC APPLICATIONS 10x38mm, IEC class gpv Rated current: 20A Rated voltage: 1000VDC.
Page -2 Page -2 AC FUSE HOLDERS Version without indicator: 1P, 1P+N, 2P, 3P, 3P+N Version with indicator: 1P For fuses x38, 14x51 and 22x58mm IEC class gg or am. IEC rated current: 32A, 50A, 0A IEC rated
C32 ACERT Generator Set Electric Power
Caterpillar is leading the power generation marketplace with Power Solutions engineered to deliver unmatched flexibility, expandability, reliability, and cost-effectiveness. Generator Set Specifications