EZ-LIGHT Indicators 5-Color, Multi-Function

Transcription

1 EZ-LIGHT Indicators 5-Color, Multi-Function DC-operated indicators with 5 colors and multiple flashing frequencies Features Rugged, cost-effective and easy-to-install indicators available in K50, K50 Flat Pack, or K0 housing style Displays 5 colors and multiple flashing frequencies: Steady ON, flashing or alternating Illuminated dome provides easy-to-see operator guidance and indication of equipment status Compact devices are completely self-contained no controller needed Choose NPN or PNP input, depending on model Immune to ambient light, EMI and RFI interference to 0V dc operation QPMA EURO-STYLE PIGTAIL PUR CABLE CALL FACTORY Contact Factory for more information. Models Model Construction Connection* LED Function** Inputs K50LGRYBWPQ K50LGRYBWNQ 50 mm dome/ 0 mm mount polycarbonate PNP NPN K50FLGRYBWPQ K50FLGRYBWNQ 50 mm polycarbonate dome/ polycarbonate base -pin Euro QD 5 Color: Choose,,, or ON, flashing or alternating PNP NPN K0LGRYBWPQ K0LGRYBWNQ 50 mm dome/ Flat or DIN-mount polycarbonate PNP NPN * K50L and K50FL Models: Integral QD models are listed. For 50 mm PVC pigtail with QD, replace Q with QP in model number (example, K50LGRYBWPQP). For m (6.5 ) cable, omit suffix Q from model number (example, K50LGRYBWP). A model with a QD requires a mating cable (see page5) K0L Models: For terminal-wired models, omit suffix Q from model number (example, K0LGRYBWP). ** Contact factory for other colors and color combinations. WARNING... Not To Be Used for Personnel Protection Never use these products as sensing devices for personnel protection. Doing so could lead to serious injury or death. These sensors do NOT include the self-checking redundant circuitry necessary to allow their use in personnel safety applications. A sensor failure or malfunction can cause either an energized or de-energized sensor output condition. Consult your current Banner Safety Products catalog for safety products which meet OSHA, ANSI and IEC standards for personnel protection. Printed in USA 0/09 P/N rev. A

2 EZ-LIGHT Indicators - 5-Color, Multi-Function Specifications Supply Voltage and Current Indicators Input Response Time to 0V 50 ma max. LEDs are independently selected:,,, or, ON steady or flashing, alternating or rotating Indicator ON: 50 ms (max.); Indicator OFF: 0 ms (max.) Indicator Flash Rate Environmental Rating Connections -Color: second flash rate (500 ms ON), and 5-Color Flash: 500 ms per color K50L and K50FL Models: Fully encapsulated, IEC IP6 K0L Models: IEC IP6 (encapsulated electronics) Integral -pin Euro-style QD, 50 mm PVC pigtail with QD, or m (6.5 ) integral cable, depending on model K0L Models: Terminal-wired models for use with bulk cable available Operating Conditions 0 to +50 C ( 0 to + F) Certifications Percent of Maximum Intensity vs Viewing Angle Intensity (Percent) 00.0% 90.0% 0.0% 0.0% 60.0% 50.0% 0.0% 0.0% 0.0% 0.0% 0.0% Viewing Angle (Deg) P/N rev. A Tel: 6.5.6

3 PNP Hookup Function steady flashes steady flashes steady flashes steady flashes steady flashes, flash, flash, flash, flash, flash, flash, flash Banner Engineering Corp. Minneapolis, MN U.S.A. Tel: EZ-LIGHT Indicators - 5-Color, Multi-Function NPN Hookup Hookups Wiring Diagram PNP 6 Indicator Color -0V dc G R Y B W NPN 6 Indicator Color -0V dc G R Y B W Wiring Key: = (not used) = = = used) (not 5= 6= = = P/N rev. A = Whi = Bro = Gre = Yell 5 = Gra 6 = = = = Whi = Bro = Gre = Yell 5 5 = Gra = 5 6 = Blu 65 5 =

4 NPN Hookup EZ-LIGHT Indicators - 5-Color, Multi-Function Function, flash, flash, flash,, flash,, flash,, flash,, flash,, flash,, flash,, flash,, flash P/N rev. A PNP Hookup Hookups (continued) Wiring Diagram = = == = = = == == === 5 == == 5 = 6 = 5 = 56 === = 5 6 = 65 === 5 = 6 = 56 === 6 = = 6 === = == = = Tel: = = == = === == === == 5 === 5 == 65 === 65 == 56 === 56 == 56 === 56 == 6 == 6 == = = = =

5 Hookups (continued) Function PNP Hookup NPN Hookup Wiring Diagram,, flash,, flash = = =,,,, = flash = = = 5 = Dimensions = K50L 65 K0L = 50.0 mm 5 = 5 (.9") 0. mm 6 = (.") 6 = 65.0 mm mm (.56") = (.6") mm (.50")* = = M0x (mounting nut 0 mm (0.9") included) = = Internal Threads ½ - NPSM Max. Torque.5 Nm (0 in lbf) K50FL mm (0.") EZ-LIGHT Indicators - 5-Color, Multi-Function.6 [.6"] 65.0 mm (.56") X Ø 5.5 mm (Ø 0.") Max. Torque. Nm (0 in lbf) with supplied screws X UNC Max. Torque. Nm (0 in lbf) 6.0 mm (.0") M X 09.5 mm (.") Internal Threads ½ - NPSM Max. Torque.5 Nm (0 in lbf) Ø50 [.9"] 60.0 [.6"] 5.0 [."] 6.0 [0.6"] x 5.0 [0.0"] x 5.0 [0.0"] x 5.5 [0."].0 [0.6"] 0.0 [.5"] Tel: P/N rev. A 5

6 EZ-LIGHT Indicators - 5-Color, Multi-Function Accessories Quick-Disconnect (QD) Cables Style Model Length Dimensions Pinout -Pin Euro-Style Cables with Open- Shield MQDCS-06 MQDCS-5 MQDCS-0 m (6.5 ) 5 m (5 ) 9 m (0 ) mm max. ø 5 mm M x 6 Female 5 = 5 = = 6 = = = = = 6 P/N rev. A Tel: 6.5.6

7 EZ-LIGHT Indicators - 5-Color, Multi-Function Mounting Brackets* K0L Black reinforced thermoplastic Bracket for mounting on 5 mm DIN rail SMBDX0DIN K50L -ga. stainless steel right-angle mounting bracket with curved slot for versatile orientation Clearance for M6 (¼") hardware SMB0A 0 mm -ga. stainless steel bracket with curved mounting slots for versatile orientation Clearance for M6 (¼") hardware Articulation slots for 90 + rotation SMB0MM -ga. 00 series stainless steel Right-angle SMBAMS series bracket with 0 mm hole for mounting sensors Articulation slots for 90 + rotation SMBAMS0RA 0 mm swivel bracket Black reinforced thermoplastic polyester Includes stainless steel mounting and swivel locking hardware SMB0SC -ga. 00 series stainless steel Right-angle bracket with 0 mm hole for mounting sensors Attachment clamp allows 60 rotation Threaded rod through-mounts to mounting surface SMB0FA -ga. 00 series stainless steel Flat SMBAMS series bracket with 0 mm hole for mounting sensors Articulation slots for 90 + rotation SMBAMS0P V-clamp, straight bracket and fasteners for mounting sensors to pipe or extrusions Clamp accommodates mm dia. tubing or square extrusions 0 mm hole for mounting sensors SMB0FVK V-clamp, right-angle bracket and fasteners for mounting sensors to pipe or extrusions Clamp accommodates mm dia. tubing or square extrusions 0 mm hole for mounting sensors * K50FL models include a mm (.9") circular velcro mounting kit for easy mounting with no additional hardware Tel: SMB0RAVK P/N rev. A

8 EZ-LIGHT Indicators - 5-Color, Multi-Function P/N rev. A WARRANTY: Banner Engineering Corp. warrants its products to be free from defects for one year. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture found to be defective at the time it is returned to the factory during the warranty period. This warranty does not cover damage or liability for the improper application of Banner products. This warranty is in lieu of any other warranty either expressed or implied. Banner Engineering Corp., 9 Tenth Ave. No., Minneapolis, MN USA 55 Phone: sensors@bannerengineering.com