Model Description IDEC Model

Transcription

1 SureCross BWA-Relay IDC relays and accessories The following are the IDC relays and relay accessories resold by Banner ngineering Corp and recommended for use with the SureCross wireless product line. Model Description IDC Model BWA-RLAY-V volt relay (blade style) and base RHB-UDC4V with SHB-0 BWA-RLAY-4V 4 volt relay (blade style) and base RHB-UDCV with SHB-0 BWA-RHB-UDCV volt relay only, blade style RHB-UDCV BWA-RHB-UDC4V 4 volt relay only, blade style RHB-UDC4V BWA-SHB-0 Relay base only SHB-0 Printed in USA Jan 03 P/N 6 Rev. A

2 RH Series RH Series General Purpose Midget Key features of the RH series include: Compact midget size saves space High switching capacity (A) Choice of blade or PCB style terminals Relay options include indicator light, check button, and top mounting bracket DIN rail, surface, panel, and PCB type sockets available for a wide range of mounting applications Contact Material Silver cadmium oxide Contact Resistance 0mΩ maximum (initial value) Specifications Minimum Applicable Load Operating Time Release Time Maximum Continuous Applied Voltage (AC/DC) at 0 C Minimum Operating Voltage (AC/DC) at 0 C Drop-Out Voltage (AC) Drop-Out Voltage (DC) Power Consumption Insulation Resistance Dielectric Strength Frequency Response Temperature Rise Vibration Resistance Shock Resistance Life xpectancy Operating Temperature Weight 4V DC/30mA, V DC/0mA (reference value) SPDT (RH), DPDT (RH): 0ms maximum 3PDT (), 4PDT (RH4): ms maximum SPDT (RH), DPDT (RH): 0ms maximum 3PDT (), 4PDT (RH4): ms maximum % of the rated voltage 80% of the rated voltage 30% or more of the rated voltage % or more of the rated voltage SPDT (RH): DC: 0.8W AC:.VA (0Hz), VA (60Hz) DPDT (RH): DC: 0.W AC:.4VA (0Hz),.VA (60Hz) 3PDT (): DC:.W AC: VA (0Hz),.7VA (60Hz) 4PDT (RH4): DC:.W AC:.VA (0Hz), VA (60Hz) 0MΩ min (measured with a 00V DC megger) SPDT (RH) Between live and dead parts:,000v AC, minute; Between contact circuit and operating coil:,000v AC, minute; Between contacts of the same pole:,000v AC, minute DPDT (RH), 3PDT (), 4PDT (RH4) Between live and dead parts:,000v AC, minute; Between contact circuit and operating coil:,000v AC, minute; Between contact circuits:,000v AC, minute; Between contacts of the same pole:,000v AC, minute,800 operations/hour Coil: 8 C maximum Contact: 6 C maximum 0 to 6G (Hz maximum) SPDT/DPDT: 00N (approximately 0G) 3PDT/4PDT: 0N (approximately G) lectrical: over 00,000 operations at 0V AC, A; (over 00,000 operations at 0V AC, A for SPDT [RH], 3PDT [], 4PDT [RH4]) Mechanical: 0,000,000 operations 30 to +70 C SPDT: 4g, DPDT: 37g (approximately) 3PDT: 0g, 4PDT: 74g (approximately) UL Recognized Files No. RH = RH = = RH4 = 6 File No. B Ordering Information CSA Certified File No.LR344 Order standard voltages for fastest delivery. Allow extra delivery time for non-standard voltages. Basic Part No. RHB-U Coil Voltage: AC-0V - USA: (800) 6-IDC or (408) , Canada: (888) 37-IDC

3 RH Series Part Numbers: RH Series with Options Termination Contact Configuration Basic Part No. Indicator Light Check Button Indicator Light and Check Button Top Bracket B (blade) V (PCB 0.078" [mm] wide) Part Numbers SPDT RHB-U RHB-UL RHB-UC RHB-ULC RHB-UT DPDT RHB-U RHB-UL RHB-UC RHB-ULC RHB-UT 3PDT B-U B-UL B-UC B-ULC B-UT 4PDT RH4B-U RH4B-UL RH4B-UC RH4B-ULC RH4B-UT SPDT RHV-U RHV-UL RHV-UC RHV-ULC DPDT RHV-U RHV-UL RHV-UC RHV-ULC 3PDT V-U V-UL V-UC V-ULC 4PDT RH4V-U RH4V-UL RH4V-UC RH4V-ULC Ratings Coil Ratings Rated Voltage Rated Current ±% at 0 C 60Hz 0Hz Coil Resistance ±% at 0 C SPDT DPDT 3PDT 4PDT SPDT DPDT 3PDT 4PDT SPDT DPDT 3PDT 4PDT 6V 0mA 00mA 80mA 330mA 70mA 38mA 330mA 387mA 8.8Ω.4Ω 6.0Ω.4Ω V 7mA 0mA 40mA 6mA 86mA 8mA 6mA 6mA 76.8Ω 3.3Ω.3Ω.Ω AC 4V 37mA 0mA 70mA 83mA 4mA.7mA 8mA 8mA 300Ω 3Ω 3Ω 84.Ω 0V* 7.mA ma 4.mA 6.mA 8.6mA.mA 6.4mA.mA 7,680Ω 4,70Ω 770Ω 0Ω 40V 3.mA.mA 7.mA 8.3mA 3.7mA 6.mA 8.mA.8mA 3,00Ω,Ω,0Ω 0Ω SPDT DPDT 3PDT 4PDT SPDT DPDT 3PDT 4PDT 6V 8mA 0mA 40mA 0mA 47Ω 40Ω Ω 4Ω V 64mA 7mA 0mA ma 88Ω 60Ω 0Ω 6Ω DC 4V 3mA 36.mA 60mA 6mA 70Ω 60Ω 400Ω 388Ω 48V 8mA 8.mA 30mA 3mA,660Ω,600Ω,600Ω 0Ω V 8mA.mA.8mA ma 3,800Ω,0Ω 8,600Ω 7,340Ω * For RH relays = /0V AC. For RH relays = 0/40V AC. For RH relays = 0/V DC. Coil Inductance Coil Inrush Rated Voltage nergizing De-nergizing SPDT DPDT 3PDT 4PDT SPDT DPDT 3PDT 4PDT SPDT DPDT 3PDT 4PDT 6V 0mA 340mA 0mA 60mA 0.0H 0.08H 0.0H 0.0H 0.06H 0.04H 0.03H 0.0H V 0mA 70mA 60mA 3mA 0.037H 0.30H 0.H 0.8H 0.H 0.6H 0.H 0.H AC 4V 6mA 8mA 30mA 6mA.H.H 0.H 0.73H 0.H 0.63H H 0.36H 0V* ma 6mA 6mA 33mA 37H 33H H 8H H H H H 40V 7mA 8mA ma 6mA 30H 30H 84H 73H 77H 6H 47H 36H SPDT DPDT 3PDT 4PDT SPDT DPDT 3PDT 4PDT 6V DC V 4V 48V V N/A N/A N/A N/A N/A N/A N/A N/A * For RH relays = /0V AC. For RH relays = 0/40V AC. USA: (800) 6-IDC or (408) , Canada: (888) 37-IDC -3

4 RH Series Ratings con t Contact Ratings # of Max Contact Power General Ratings Poles Resistive Inductive Voltage Resistive Inductive* RH RH RH4 AC40VA DC300W AC60VA DC300W *cosø = 0.3 L/R - 7ms AC0VA DCW AC0VA DCW Part Numbers: Sockets Standard DIN Relay Rail Mount AC A 7A AC0 7A 4.A DC30 A 7A AC A 7.A AC0 7.A A DC30 A 7.A CSA Ratings Voltage Resistive General Use HP Rating RH RH RH4 RH RH RH4 RH,, 3 AC40V A A 7.A 7A 7A 7A A /3HP AC0V A A A A 7.A 7.A 7.A /6HP DC30V A A A A 7A 7.A Finger-Safe DIN Rail Mount Surface Mount Panel Mount PCB Mount RHB SHB-0 SHB-0C SHB- SHB-6 RHB SHB-0 SHB-0C SHB-0 SHB- SHB-6 B SH3B-0 SH3B-0C SH3B- UL Ratings Voltage Applicable Sockets SH3B-6 RH4B SH4B-0 SH4B-0C SH4B- SH4B-6 See Section F for details on sockets. All DIN rail mount sockets shown above can be mounted using DIN rail BNDN00. RH, RH Resistive RH4 RH, RH General Use TUV Ratings Voltage RH RH RH4 AC40V A A 7.A 7.A DC30V A A A A RH4 Spring & Clips (optional) Part Number Use With SYS-0F➂ SFA- SHB-0, 0C SFA-0➁ SY4S-F➂ SFA-30 SHB-, 6 SFA-30➁ SY4S-0F➂ SFA- SHB-0, 0C SFA-0➁ SY4S-F➂ SFA-30 SHB-, 6 SFA-30➁ SH3B-0F➂ SH3B-0, 0C SFA-, -0➁ SY4S-F➂ SFA-30 SH3B-, 6 SFA-30➁ SH4B-0F➂ SH4B-0, 0C SFA-, -0➁ SY4S-F➂ SFA-30 SH4B-, 6 SFA-30➁ Horse Power Rating RH, RH AC40V A 7.A 7.A 7A 6.A A /3HP AC0V A A A 7A 7.A 7.A /6HP DC30V A A 7A DC8V A A A 7A Top latch ➁ Side latch ➂ Pullover spring -4 USA: (800) 6-IDC or (408) , Canada: (888) 37-IDC

5 RH Series Internal Circuits (-) (+) RH (-) (+) RH Image as viewed from bottom of relay. Refer to socket for exact wiring layout (Section F). (-) (+) (-) (+) RH4 lectrical Life Curves RH AC V Resistive Life (x,000) Operations AC 0V Inductive AC V Inductive AC 0V Resistive Life (x,000) Operations DC 0V Resistive DC 30V Inductive DC 0V Inductive DC 30V Resistive AC 0V Resistive RH AC V Resistive DC 30V Resistive Life (x,000) Operations 0 0 AC 0V Inductive AC 0V Resistive AC V Inductive Life (x,000) Operations 0 0 DC 0V Resistive DC 0V Inductive DC 30V Inductive RH AC V Resistive 00 DC 30V Resistive Life (x,000) Operations 0 0 Life (x,000) Operations 0 0 DC 30V Inductive 0 AC 0V Inductive AC 0V Resistive AC V Inductive DC 0V Resistive DC 0V Inductive USA: (800) 6-IDC or (408) , Canada: (888) 37-IDC -

6 RH Series Maximum Switching Capacity RH RH//RH4 (RH).0 AC resistive (RH//RH4).0 AC resistive.0 AC inductive.0 AC inductive.0 DC inductive DC resistive.0 DC inductive DC resistive Load Voltage (V) Load Voltage (V) Top Bracket Mounting Blade Terminal RHB-UT Dimensions RHB-UT ø.6 hole ø.6 hole max max. 6.4 Plug-in Blade Terminal RHB RHB Total length from panel surface including relay socket SHB-0A: 6. (63.) max., SHB-: 3.6 (4.6) max. Dimensions in the ( ) include a hold-down spring. Total length from panel surface including relay socket SHB-0A: 6. (63.) max., SHB-: 3.6 (4.6) max. Dimensions in the ( ) include a hold-down spring. ø.6 hole ø.6 hole max max. 6.4 All dimensions in mm USA: (800) 6-IDC or (408) , Canada: (888) 37-IDC

7 RH Series Dimensions con t Plug-in Blade Terminal B Total length from panel surface including relay socket SH3B-0A: 6. (63.) max., SH3B-: 3.6 (4.6) max. Dimensions in the ( ) include a hold-down spring. RH4B Total length from panel surface including relay socket SH4B-0A: 6. (63.) max., SH4B-: 3.6 (4.6) max. Dimensions in the ( ) include a hold-down spring. ø.6 hole ø.6 hole max. PCB Terminal RHV ø holes 7. 3-ø.4 holes 6.6. RHV 3.6 max ø.4 holes max max V RH4V max ø.4 holes max ø.4 holes B-UT RH4B-UT 3. ø.6 hole ø.6 hole max max max All dimensions in mm. USA: (800) 6-IDC or (408) , Canada: (888) 37-IDC -7

8 SH Series: DIN Rail Snap-Mount Sockets SH Series: DIN Rail Snap-Mount Sockets SHB Sockets SHB-0 Style -blade, snap-mount/surface mount M3. Terminal Screw When using BAA/BAP: 8. 8 DIN Rail (BAA/BAP) -ø4. Mounting Holes (or M4 Tapped Holes) Terminal Arrangement F Sockets Terminal/Torque Wire Size lectrical Rating Compatible Relay Hold-Down Spring Hold-Down Clip (Coil) M3 screws/(. - in lbs) (contact) M3. screws ( -. in lbs) with captive wire clamp Maximum up to #AWG 0V, A RHB SYS-0F SFA- (top notch), SFA-0 (side notch) M3 Terminal Screw max. 7. max. 6. min. (For terminals,, and ) ø3.6 min. 4 max.. max. 4.8 min. (For terminals 3 and 4) 4 3 (Top View) ø3. min. SHB-0C Fingersafe Style -blade, snap-mount/surface mount Terminal/Torque Wire Size lectrical Rating Compatible Relay (Coil) M3 screws/(. - in lbs) (contact) M3. screws with captive wire clamp, fingersafe ( -. in lbs) Maximum up to #AWG 0V, A RHB M3. Terminal Screw ø 4. M3 Terminal Screw 48 When using BAA/BAP: DIN Rail (BAA/BAP) 6 -ø4. Mounting Holes (or M4 Tapped Holes) Ring type crimping terminals cannot be used. Terminal Arrangement 4 3 (Top View) Hold-Down Spring SYS-0F Hold-Down Clip SFA- (top notch), SFA-0 (side notch). For socket mounting accessories, see page F-.. For hold-down clip/spring selections, see page F-4. All dimensions are in mm. F-4 USA: (800) 6-IDC or (408) , Canada: (888) 37-IDC

9 SureCross BWA-Relay Banner ngineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner ngineering Corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the improper application of the Banner product. THIS LIMITD WARRANTY IS XCLUSIV AND IN LIU OF ALL OTHR WARRANTIS WHTHR XPRSS OR IMPLID (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MRCHANTABILITY OR FITNSS FOR A PARTICULAR PURPOS), AND WHTHR ARISING UNDR COURS OF PRFORMANC, COURS OF DALING OR TRAD USAG. This Warranty is exclusive and limited to repair or, at the discretion of Banner ngineering Corp., replacement. IN NO VNT SHALL BANNR NGINRING CORP. B LIABL TO BUYR OR ANY OTHR PRSON OR NTITY FOR ANY XTRA COSTS, XPNSS, LOSSS, LOSS OF PROFITS, OR ANY INCIDNTAL, CONSQUNTIAL OR SPCIAL DAMAGS RSULTING FROM ANY PRODUCT DFCT OR FROM TH US OR INABILITY TO US TH PRODUCT, WHTHR ARISING IN CONTRACT OR WARRANTY, STATUT, TORT, STRICT LIABILITY, NGLIGNC, OR OTHRWIS. Banner ngineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously manufactured by Banner ngineering Corp. The manufacturer does not take responsibility for the violation of any warning listed in this document. CAUTION. Make no modifications to this product. Any modifications to this product not expressly approved by Banner ngineering could void the user s authority to operate the product. Contact the Factory for more information. All specifications published in this document are subject to change. Banner reserves the right to modify the specifications of products, prior to their order, without notice. Banner ngineering reserves the right to update or change documentation at any time. For the most recent version of any documentation, please refer to our website: www. bannerengineering.com Banner ngineering Corp. All rights reserved. P/N 6 Rev. A Banner ngineering Corp., 74 Tenth Ave. No., Minneapolis, MN USA 44 Phone: mail: sensors@bannerengineering.com